A highly active and stable hydrogen evolution catalyst based on pyrite-structured cobalt phosphosulfide

Tailoring and understanding the lithium storage performance of triple-doped cobalt phosphide composites

Cobalt phosphide (CoP) with high theoretical capacity as well as ceramic-like and metal-like properties is considered as a promising anode for lithium-ion batteries (LIBs). However, the large volume change and sluggish kinetic response limit its practical application. The optimization of composition, structural control and performance regulation of CoP electrodes can be achieved by the bottom-up assembly technique of metal-organic frameworks (MOFs). Due to the effective electronic regulation and lithiophilicity brought by the multiple heteroatoms doping and the synergistic effect of the unique structure derived from MOFs, the N, O, P triple-doped carbon and CoP composites (ZCP@NOP) exhibited excellent rate capability (554.61 mAh g-1 at 2 A g-1) and cycling stability (806.7 mAh g-1 after 500 cycles at 0.5 A g-1). The essence and evolution of lithium storage mechanism in CoP electrodes are also confirmed by the ex-situ techniques. The synergistic benefits of heteroatom co-doping carbon and cobalt phosphide, such as the decrease of the diffusion energy barrier of Li-ions and the optimization of electronic structures, are highlighted in theoretical calculations. In conclusion, new thoughts and ideas for the creation of future battery anode are provided by the combination of the N, O, P co-doping and the adaptable structural adjustment technique.

Cobalt-Based Nanoscale Material: An Emerging Electrocatalyst for Hydrogen Production

Modern civilization has been highly suffering from energy crisis and environmental pollutions. These two burning issues are directly and indirectly created from fossil fuel consumption and uncontrolled industrialization. The above critical issue can be solved through the proper utilization of green energy sources where no greenhouse gases will be generated upon burning of such materials. Hydrogen is the most eligible candidate for this purpose. Among various methods of hydrogen generation, electrocatalytic process is one of the most efficient methods because of easy handling and high efficiency. In these aspects Co-based nanomaterials are considered to be extremely significant as they can be utilized as efficient, recyclable and ideal catalytic system. In this article a series of Co-based nano-electrocatalysts has been discussed with proper structure-property relationship and their medium dependency. Therefore, such type of stimulating summary on recently reported electrocatalysts and their activity may be helpful for scientists of the corresponding field as well as for broader research communities. This can be inspiration for materials researchers to fabricate active catalysts for the production of hydrogen gas in room temperature.

CoPS/Co4S3 Heterojunction with Highly Exposed Active Sites and Dual-site Synergy for Effective Hydrogen Evolution Reactions

Cobalt phosphosulphide (CoPS) has recently been recognized as a potentially effective electrocatalyst for the hydrogen evolution reaction (HER). However, there have been no research on the design of CoPS-based heterojunctions to boost their HER performance. Herein, CoPS/Co4S3 heterojunction was prepared by phosphating treatment based on defect-rich flower-like Co1-xS precursors. The high specific surface area of nanopetals, together with the heterojunction structure with inhomogeneous strain, exposes more active sites in the catalyst. The electronic structure of the catalyst is reconfigured as a result of the interfacial interactions, which promote the catalyst's ability to adsorb hydrogen and conduct electricity. The synergistic effect of the Co and S dual-site further enhance the catalytic activity. The catalyst has overpotentials of 61 and 70 mV to attain a current density of 10 mA cm-2 in acidic and alkaline media, respectively, which renders it competitive with previously reported analogous catalysts. This work proposes an effective technique for constructing transition metal phosphosulfide heterojunctions, as well as the development of an efficient HER electrocatalyst.

Ultralow-Overpotential Acidic Oxygen Evolution Reaction Over Bismuth Telluride-Carbon Nanotube Heterostructure with Organic Framework

The state-of-the-art iridium and ruthenium oxides-based materials are best known for high efficiency and stability in acidic oxygen evolution reaction (OER). However, the development of economically feasible catalysts for water-splitting technologies is challenging by the requirements of low overpotential, high stability, and resistance of catalysts to dissolution during the acidic oxygen evolution reaction . Herein, an organometallic core-shell heterostructure composed of a carbon nanotube core (CNT) and bismuth telluride (Bi2Te3) shell (denoted as nC-Bi2Te3) is designed and use it as a catalyst for the acidic OER. The proposed catalyst achieves an ultralow overpotential of 160 mV at 10 mA cm-2 (geometrical), thereby outperforming most of the state-of-the-art precious-metal-based catalysts. The low Tafel slope of 30 mV dec-1 and charge transfer resistance (RCT) of 1.5 Ω demonstrate its excellent electrocatalytic activity. The morphological and chemical compositions of nC-Bi2Te3 enable the generation of ─OH functional group in the Bi─Te sections formed via a ligand support, which enhances the absorption capacity of H+ ions and increases the intrinsic catalytic activity. The presented insights regarding the material composition-structure relationship can help expand the application scope of high-performance catalysts.

Two Birds with One Stone: Contemporaneously Enhancing OER Catalytic Activity and Stability for Dual-Phase Medium-Entropy Metal Sulfides

Transition metal-based sulfides exhibit remarkable potential as electrocatalysts for oxygen evolution reaction (OER) due to the unique intrinsic structure and physicochemical characteristics. Nevertheless, currently available sulfide catalysts based on transition metals face a bottleneck in large-scale commercial applications owing to their unsatisfactory stability. Here, the first fabrication of (FeCoNiMn2 )S2 dual-phase medium-entropy metal sulfide (dp-MEMS) is successfully achieved, which demonstrated the expected optimization of stability in the OER process. Benefiting from the "cell wall" -like structure and the synergistic effect in medium-entropy systems, (FeCoNiMn2 )S2 dp-MEMS delivers an exceptionally low overpotential of 169 and 232 mV at current densities of 10 and 100 mA cm-2 , respectively. The enhancement mechanism of catalytic activity and stability is further validated by density functional theory (DFT) calculations. Additionally, the rechargeable Zn-air batteries integrated with FeCoNiMn2 )S2 dp-MEMS exhibit remarkable performance outperforming the commercial catalyst (Pt/C+RuO2 ). This work demonstrates that the dual-phase medium-entropy metal sulfide-based catalysts have the potential to provide a greater application value for OER and related energy conversion systems.

Ni(OH)2 Nanosheet as an Efficient Cocatalyst for Improved Photocatalytic Hydrogen Evolution over Cd0.9Zn0.1S Nanorods under Visible Light

Loading cocatalysts to promote spatial charge separation has been confirmed as an effective method for improving photocatalytic hydrogen production. This article reports that the synthesis of Ni(OH)2/Cd0.9Zn0.1S nanorod photocatalyst is suitable for photocatalytic H2 generation under visible light. It can be proven that the binary photocatalyst exhibits a one-dimensional nanorod morphological structure. Ni(OH)2 nanosheets occupy the top area of Cd0.9Zn0.1S nanorods. The photocatalytic H2 production rate can reach 132.93 mmol·h-1·g-1, which corresponds to an apparent quantum efficiency of up to 76.5% at a wavelength of 460 nm. In addition, the Ni(OH)2 nanosheet can aggregate the light-incited electrons of Cd0.9Zn0.1S, inhibiting the confluence of electrons and holes. The detailed analysis of its mechanism through characterization methods such as photoluminescence and electrochemical measurement shows that the significant improvement in photocatalytic performance derives from the effective spatial separation of photo-induced charge carriers. Therefore, this synthesis strategy of one-dimensional materials may bring new prospects for more efficient, stable, and sustainable photocatalysis for water splitting.

Modulating Electronic Structures of Bimetallic Co-Fe Sulfide Ultrathin Nanosheet Supported on g-C3N4 Promoting Electrocatalytic Hydrogen Evolution Performance

Heteroatom doping is a possible way to regulate the catalytic capability of electrocatalysts for hydrogen evolution reaction (HER). This work focuses on the development of bimetallic Cobalt-Iron sulfide ultrathin nanosheets supported on the graphitic carbon nitride (g-C3N4) catalyst as efficient HER electrocatalysts (CoS2/FeS2/CN) with good stability at wide pH value. The ultrathin nanosheet exposes more active sites and enhances the catalyst activity. Electrochemical experiments demonstrate that adding g-C3N4 and Fe to CoS2 increases its catalytic activity and stability. Furthermore, g-C3N4 and Fe co-doped with CoS2 can modulate electronic structures on the interface. The CoS2/FeS2/CN exhibits outstanding HER performance, reaching a current density of 10 mA cm-2 with overpotentials of only 76.5 mV in an acidic solution and 175.6 mV in an alkaline solution. It also demonstrates exceptional durability, superior to commercial platinum/carbon catalysts. This work introduces a promising approach for designing low-cost, high-performance HER electrocatalysts with a wide pH range.

Efficient electrocatalyst for solar-driven electrolytic water splitting: Phosphorus (P) and niobium (Nb) co-doped NiFe2O4 nanosheet

In the context of hydrogen production through water electrolysis, the development of efficient and stable electrocatalysts is of paramount importance. However, the creation of cost-effective electrocatalysts poses a significant challenge. In this study, a P and Nb co-doped NiFe2O4 nanosheet is designed and grown on Fe foam (referred to as P, Nb-NiFe2O4/FF). The P, Nb-NiFe2O4/FF exhibits a distinctive crystalline/amorphous heterostructure, and the co-doping of P and Nb in the material leads to the exposure of additional catalytic active sites, optimization of the electronic structure, and enhancement of charge conductivity. Additionally, the P, Nb-NiFe2O4/FF possesses a superhydrophilic surface for the enhancement of charge/mass transfer at interface and a superaerophobic surface, facilitating the efficient release of gas. The P, Nb-NiFe2O4/FF demonstrates remarkable oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) activities, achieving overpotential as low as 247 mV and 127 mV, respectively, to attain the current density response of 100 mA cm-2. Based on the high bifunctional activities, the P, Nb-NiFe2O4/FF requires only a working voltage of 1.56 V to obtain the current density of 10 mA cm-2 in overall water splitting. Furthermore, the overall water splitting device of P, Nb-NiFe2O4/FF is integrated with a commercial solar cell to simulate a solar-powered water splitting system, resulting in as superior solar-to-hydrogen conversion efficiency of 15.11%.

Recent Advances in Co-Based Electrocatalysts for Hydrogen Evolution Reaction

Water splitting is a promising technique in the sustainable "green hydrogen" generation to meet energy demands of modern society. Its industrial application is heavily dependent on the development of novel catalysts with high performance and low cost for hydrogen evolution reaction (HER). As a typical non-precious metal, cobalt-based catalysts have gained tremendous attention in recent years and shown a great prospect of commercialization. However, the complexity of the composition and structure of newly-developed Co-based catalysts make it urgent to comprehensively retrospect and summarize their advance and design strategies. Hence, in this review, the reaction mechanism of HER is first introduced and the possible role of the Co component during electrocatalysis is discussed. Then, various design strategies that could effectively enhance the intrinsic activity are summarized, including surface vacancy engineering, heteroatom doping, phase engineering, facet regulation, heterostructure construction, and the support effect. The recent progress of the advanced Co-based HER electrocatalysts is discussed, emphasizing that the application of the above design strategies can significantly improve performance by regulating the electronic structure and optimizing the binding energy to the crucial intermediates. At last, the prospects and challenges of Co-based catalysts are shown according to the viewpoint from fundamental explorations to industrial applications.

Controlled Surface Modification of Cobalt Phosphide with Sulfur Tunes Hydrogenation Catalysis

Transition metal phosphides have shown promise as catalysts for water splitting and hydrotreating, especially when a small amount of sulfur is incorporated into the phosphides. However, the effect of sulfur on catalysis is not well understood. In part, this is because conventional preparation methods of sulfur-doped transition metal phosphides lead to sulfur both inside and at the surface of the material. Here, we present an alternative method of modifying cobalt phosphide (CoP) with sulfur using molecular S-transfer reagents, namely, phosphine sulfides (SPR3). SPR3 added sulfur to the surface of CoP and using a series of SPR3 reagents having different P═S bond strengths enabled control over the amount and type of sulfur transferred. Our results show that there is a distribution of different sulfur sites possible on the CoP surface with S-binding strengths in the range of 69 to 84 kcal/mol. This provides fundamental information on how sulfur binds to an amorphous CoP surface and provides a basis to assess how number and type of sulfur on CoP influences catalysis. For the catalytic hydrogenation of cinnamaldehyde, intermediate amounts of sulfur with intermediate binding strengths at the surface of CoP were optimal. With some but not too much sulfur, CoP exhibited a higher hydrogenation productivity and a decreased formation of secondary reaction products. Our work provides important insight into the S-effect on the catalysis by transition metal phosphides and opens new avenues for catalyst design.

Revealing the intrinsic peroxidase-like catalytic mechanism of O-doped CoS2 nanoparticles

CoS2 nanoparticles (NPs) have shown promise as potential peroxidase (POD)-like catalysts, but the catalytic molecular mechanisms are largely unknown. Moreover, no study has adequately explored the influence of O-doping induced by the inevitable oxidation of CoS2 on their POD-like activity. Here, O-doped CoS2 NPs were prepared by a one-step method, and their intrinsic POD-like catalytic mechanism was investigated with a combined experimental and theoretical approach. The hydroxyl radical (˙OH) and the superoxide radical (O2˙-) have been found to play significant roles in the POD-like activity, and ˙OH is the major radical. The O-doping could reduce the transition-state energy barrier of H2O2 dissociation, thus promoting the decomposition of H2O2 to ˙OH and inducing the formation of O2˙-. Therefore, O-doping is an effective method for enhancing the catalytic activity of CoS2 NPs. Furthermore, due to the excellent oxidation property of ˙OH and O2˙-, this nanozyme exhibited efficient catalytic activity towards the degradation of organic dyes with H2O2. This manuscript provides a new inspiration for designing more promising anion-defective transition-metal sulfide nanozymes for different applications.

Nature-Inspired Design of Nano-Architecture-Aligned Ni5P4-Ni2P/NiS Arrays for Enhanced Electrocatalytic Activity of Hydrogen Evolution Reaction (HER)

The projection of developing sustainable and cost-efficient electrocatalysts for hydrogen production is booming. However, the full potential of electrocatalysts fabricated from earth-abundant metals has yet to be exploited to replace Pt-group metals due to inadequate efficiency and insufficient design strategies to meet the ever-increasing demands for renewable energies. To improve the electrocatalytic performance, the primary challenge is to optimize the structure and electronic properties by enhancing the intrinsic catalytic activity and expanding the active catalytic surface area. Herein, we report synthesizing a 3D nanoarchitecture of aligned Ni₅P₄-Ni₂P/NiS (plate/nanosheets) using a phospho-sulfidation process. The durability and unique design of prickly pear cactus in desert environments by adsorbing moisture through its extensive surface and ability to bear fruits at the edges of leaves inspire this study to adopt a similar 3D architecture and utilize it to design an efficient heterostructure catalyst for HER activity. The catalyst comprises two compartments of the vertically aligned Ni₅P₄-Ni₂P plates and the NiS nanosheets, resembling the role of leaves and fruits in the prickly pear cactus. The Ni₅P₄-Ni₂P plates deliver charges to the interface areas, and the NiS nanosheets significantly influence H_ad and transfer electrons for the HER activity. Indeed, the synergistic presence of heterointerfaces and the epitaxial NiS nanosheets can substantially improve the catalytic activity compared to nickel phosphide catalysts. Notably, the onset overpotential of the best-modified ternary catalysts exhibits (35 mV) half the potential required for nickel phosphide catalysts. This promising catalyst demonstrates 70 and 115 mV overpotentials to attain current densities of 10 and 100 mA cm^-2, respectively. The obtained Tafel slope is 50 mV dec^-1, and the measured double-layer capacitance from cyclic voltammetry (CV) for the best ternary electrocatalyst is 13.12 mF cm^-2, 3 times more than the nickel phosphide electrocatalyst. Further, electrochemical impedance spectroscopy (EIS) at the cathodic potentials reveals that the lowest charge transfer resistance is linked to the best ternary electrocatalyst, ranging from 430 to 1.75 Ω cm^-2. This improvement can be attributed to the acceleration of the electron exchangeability at the interfaces. Our findings demonstrate that the epitaxial NiS nanosheets expand the active catalytic surface area and simultaneously elevate the intrinsic catalytic activity by introducing heterointerfaces, which leads to accommodating more H_ad at the interfaces.

Dopant triggered atomic configuration activates water splitting to hydrogen

Finding highly efficient hydrogen evolution reaction (HER) catalysts is pertinent to the ultimate goal of transformation into a net-zero carbon emission society. The design principles for such HER catalysts lie in the well-known structure-property relationship, which guides the synthesis procedure that creates catalyst with target properties such as catalytic activity. Here we report a general strategy to synthesize 10 kinds of single-atom-doped CoSe₂-DETA (DETA = diethylenetriamine) nanobelts. By systematically analyzing these products, we demonstrate a volcano-shape correlation between HER activity and Co atomic configuration (ratio of Co-N bonds to Co-Se bonds). Specifically, Pb-CoSe₂-DETA catalyst reaches current density of 10 mA cm^-2 at 74 mV in acidic electrolyte (0.5 M H₂SO₄, pH ~0.35). This striking catalytic performance can be attributed to its optimized Co atomic configuration induced by single-atom doping.

Low-temperature synthesis of colloidal few-layer WTe2 nanostructures for electrochemical hydrogen evolution

High-quality transition metal tellurides, especially for WTe₂, have been demonstrated to be necessarily synthesized under close environments and high temperatures, which are restricted by the low formation Gibbs free energy, thus limiting the electrochemical reaction mechanism and application studies. Here, we report a low-temperature colloidal synthesis of few-layer WTe₂ nanostructures with lateral sizes around hundreds of nanometers, which could be tuned the aggregation state to obtain the nanoflowers or nanosheets by using different surfactant agents. The crystal phase and chemical composition of WTe₂ nanostructures were analyzed by combining the characterization of X-ray diffraction and high-resolution transmission electron microscopy imaging and elements mapping. The as-synthesized WTe₂ nanostructures and its hybrid catalysts were found to show an excellent HER performance with low overpotential and small Tafel slope. The carbon-based WTe₂-GO and WTe₂-CNT hybrid catalysts also have been synthesized by the similar strategy to study the electrochemical interface. The energy diagram and microreactor devices have been used to reveal the interface contribution to electrochemical performance, which shows the identical performance results with as-synthesized WTe₂-carbon hybrid catalysts. These results summarize the interface design principle for semimetallic or metallic catalysts and also confirm the possible electrochemical applications of two-dimensional transition metal tellurides.

Surface oxidation protection strategy of CoS2 by V2O5 for electrocatalytic hydrogen evolution reaction

Transition metal sulfides (TMSs) are promising electrocatalysts for hydrogen evolution reaction (HER), while TMSs usually suffer from inevitable surface oxidation in air, and the impact of the surface oxidation on their HER catalytic activity remains unclear. Herein, we demonstrate an effective strategy for reducing the surface oxidation degree of easily oxidized CoS₂ by introducing glued vanadium pentoxide (V₂O₅) nanoclusters, taking advantage of the preferential adsorption and strong interaction between high-valence V and O₂. Combining oxidation protection and elaborate oxidation control experiments reveal that reduced surface oxidation degree of CoS₂ is conducive to affording promising HER catalytic performance, as the oxidized surface of CoS₂ can hinder the dissociation of water and thus is harmful to the HER process. Direct evidence is provided that surface oxidation should be carefully considered for TMS-based HER catalysts. The present work not only develops a new strategy for protecting CoS₂ from surface oxidation, but also provides deep insight into the impact of surface oxidation on the HER performance of transition metal compounds.

Incorporation of CeO2 with Ni-Co mixed metal phosphide boosts electrochemical seawater oxidation performance

Electrochemical seawater oxidation has been regarded as one of the most promising strategies for cost-efficient production of hydrogen from the standpoint of sustainability, but suffers from a competitive chlorine evolution/oxidation reaction. Herein, we report a facile hard templated route to fabricate CeO₂ incorporated Ni-Co mixed metal phosphide embedded in a carbon matrix (CeO₂-Co_2-xNi_xP@C). Benefiting from compositional and structural features, the obtained CeO₂-Co_2-xNi_xP@C possesses remarkably improved OER performance in 1 M KOH (η = 295 mV at 10 mA cm^-2) compared with Co_2-xNi_xP@C. More importantly, the catalytic activity and stability is retained well after changing fresh water to seawater to constitute the working electrolyte. The promotion effect of CeO₂ can be attributed to its unique capability in regulating the surface state of catalysts, contributing to efficient inhibition of chlorine competition.

Transition Metal Non-Oxides as Electrocatalysts: Advantages and Challenges

The identification of hydrogen as green fuel in the near future has stirred global realization toward a sustainable outlook and thus boosted extensive research in the field of water electrolysis focusing on the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). A huge class of compounds consisting of transition metal-based nitrides, carbides, chalcogenides, phosphides, and borides, which can be collectively termed transition metal non-oxides (TMNOs), has emerged recently as an efficient class of electrocatalysts in terms of performance and longevity when compared to transition metal oxides (TMOs). Moreover, the superiority of TMNOs over TMOs to effectively catalyze not only OERs but also HERs and ORRs renders bifunctionality and even trifunctionality in some cases and therefore can replace conventional noble metal electrocatalysts. In this review, the crystal structure and phases of different classes of nanostructured TMNOs are extensively discussed, focusing on recent advances in design strategies by various regulatory synthetic routes, and hence diversified properties of TMNOs are identified to serve as next-generation bi/trifunctional electrocatalysts. The challenges and future perspectives of materials in the field of energy conversion and storage aiding toward a better hydrogen economy are also discussed in this review.

Efficient electron extraction by CoS2loaded onto anatase TiO2for improved photocatalytic hydrogen evolution

Titanium dioxide (TiO₂) as a benchmark photocatalyst has been attracting attention due to its photocatalytic activity combined with photochemical stability. In particular, TiO₂with anatase polymorph holds promise for driving reduction reactions, such as proton reduction to evolve H₂via photocatalysis. In this study, anatase TiO₂is loaded with CoS₂through the hydrothermal route to form a CoS₂@TiO₂photocatalyst system. X-ray absorption near edge structure confirms the +2-oxidation state of the Co cation, while extended x-ray absorption fine structure shows that each Co²⁺cation is primarily coordinated to six S^-anions forming a CoS₂-like species. A small fraction of the Co²⁺species is also coordinated to O^2-anions forming Co_xO_yspecies and substitutionally resides at the Ti⁴⁺-sites. Further investigations with steady-state IR absorption induced by UV-light and time-resolved microwave conductivity suggest an efficient electron transfer from the conduction band of TiO₂to the surface-loaded CoS₂which acts as a metallic material with no bandgap. The CoS₂shallowly traps electrons at the host surface and facilitates proton reduction. An appreciably enhanced H₂evolution rate (8 times) is recognised upon the CoS₂loading. The CoS₂is here proposed to function as a proton reduction cocatalyst, which can potentially be an alternative to noble metals.

Fe and P dual-doped nickel carbonate hydroxide/carbon nanotube hybrid electrocatalysts for an efficient oxygen evolution reaction

Designing cost-effective and highly active oxygen evolution reaction (OER) electrocatalysts is critical for large-scale hydrogen production from electrocatalytic water splitting. Herein, Fe and P dual-doped nickel carbonate hydroxide/carbon nanotubes (Fe, P-NiCH/CNTs) were fabricated through a solvothermal method. By virtue of the optimized electronic structure, improved conductivity and enriched active sites, the as-fabricated Fe, P-NiCH/CNT hybrid electrocatalyst exhibits superior OER activity, with a low overpotential of 222 mV at 20 mA cm^-2 and robust durability, confirming its potential as a highly efficient OER electrocatalyst. Moreover, theoretical calculations demonstrate that the doped Fe and surface adsorbed PO₄^3- can regulate the electronic structure of evolved NiOOH and decrease the energy barrier of the rate-determining step, thus leading to improved OER activity. The strategy presented in this work can also be employed to fabricate other transition metal carbonate hydroxides for various electrocatalytic applications.

Research progress in improving the oxygen evolution reaction by adjusting the 3d electronic structure of transition metal catalysts

As a clean and renewable energy carrier, hydrogen (H₂) has become an attractive alternative to dwindling fossil fuels. The key to realizing hydrogen-based energy systems is to develop efficient and economical hydrogen production methods. The water electrolysis technique has the advantages of cleanliness, sustainability, and high efficiency, which can be applied to large-scale hydrogen production. However, the electrocatalytic oxygen evolution reaction (OER) at the anode plays a decisive role in the efficiency of hydrogen evolution during water splitting. Generally, noble metal catalysts (such as ruthenium and iridium) are considered to exhibit the best OER performance; however, they exhibit disadvantages such as high costs, limited reserves, and poor stability. Therefore, the research on highly efficient non-noble metal catalysts that can replace their noble metal counterparts has always been important. This review presents the recent advances in the preparation of high-performance OER electrocatalysts by regulating the electronic structure of 3d transition metals. First, we introduce the reaction mechanism of water splitting and the OER, which reveals the high requirement of the complex four-electron process of the OER. Second, the electron transfer mode and development progress of highly active transition metal electrocatalysts are used to summarize the research situation of transition metal OER catalysts in water splitting. Finally, the future development direction and challenges of transition metal catalysts are prospected based on the current research progress.

Hydrogen Spillover-Bridged Volmer/Tafel Processes Enabling Ampere-Level Current Density Alkaline Hydrogen Evolution Reaction under Low Overpotential

Water-alkaline electrolysis holds a great promise for industry-scale hydrogen production but is hindered by the lack of enabling hydrogen evolution reaction electrocatalysts to operate at ampere-level current densities under low overpotentials. Here, we report the use of hydrogen spillover-bridged water dissociation/hydrogen formation processes occurring at the synergistically hybridized Ni₃S₂/Cr₂S₃ sites to incapacitate the inhibition effect of high-current-density-induced high hydrogen coverage at the water dissociation site and concurrently promote Volmer/Tafel processes. The mechanistic insights critically important to enable ampere-level current density operation are depicted from the experimental and theoretical studies. The Volmer process is drastically boosted by the strong H₂O adsorption at Cr_5c sites of Cr₂S₃, the efficient H₂O* dissociation via a heterolytic cleavage process (Cr_5c-H₂O* + S_3c(#) → Cr_5c-OH* + S_3c-H^#) on the Cr_5c/S_3c sites in Cr₂S₃, and the rapid desorption of OH* from Cr_5c sites of Cr₂S₃ via a new water-assisted desorption mechanism (Cr_5c-OH* + H₂O(aq) → Cr_5c-H₂O* + OH^-(aq)), while the efficient Tafel process is achieved through hydrogen spillover to rapidly transfer H^# from the synergistically located H-rich site (Cr₂S₃) to the H-deficient site (Ni₃S₂) with excellent hydrogen formation activity. As a result, the hybridized Ni₃S₂/Cr₂S₃ electrocatalyst can readily achieve a current density of 3.5 A cm^-2 under an overpotential of 251 ± 3 mV in 1.0 M KOH electrolyte. The concept exemplified in this work provides a useful means to address the shortfalls of ampere-level current-density-tolerant Hydrogen evolution reaction (HER) electrocatalysts.

Shining Light on Anion-Mixed Nanocatalysts for Efficient Water Electrolysis: Fundamentals, Progress, and Perspectives

This review introduces recent advances of various anion-mixed transition metal compounds (e.g., nitrides, halides, phosphides, chalcogenides, (oxy)hydroxides, and borides) for efficient water electrolysis applications in detail. The challenges and future perspectives are proposed and analyzed for the anion-mixed water dissociation catalysts, including polyanion-mixed and metal-free catalyst, progressive synthesis strategies, advanced in situ characterizations, and atomic level structure-activity relationship. Hydrogen with high energy density and zero carbon emission is widely acknowledged as the most promising candidate toward world's carbon neutrality and future sustainable eco-society. Water-splitting is a constructive technology for unpolluted and high-purity H₂ production, and a series of non-precious electrocatalysts have been developed over the past decade. To further improve the catalytic activities, metal doping is always adopted to modulate the 3d-electronic configuration and electron-donating/accepting (e-DA) properties, while for anion doping, the electronegativity variations among different non-metal elements would also bring some potential in the modulations of e-DA and metal valence for tuning the performances. In this review, we summarize the recent developments of the many different anion-mixed transition metal compounds (e.g., nitrides, halides, phosphides, chalcogenides, oxyhydroxides, and borides/borates) for efficient water electrolysis applications. First, we have introduced the general information of water-splitting and the description of anion-mixed electrocatalysts and highlighted their complementary functions of mixed anions. Furthermore, some latest advances of anion-mixed compounds are also categorized for hydrogen and oxygen evolution electrocatalysis. The rationales behind their enhanced electrochemical performances are discussed. Last but not least, the challenges and future perspectives are briefly proposed for the anion-mixed water dissociation catalysts.

The Underlying Molecular Mechanism of Fence Engineering to Break the Activity-stability Trade-off of Catalysts

Non-precious-metal (NPM) catalysts often face the formidable challenge of a trade-off between long-term stability and high activity, which has not yet been widely addressed. Here we propose distinct molecule-selective fence as a promising novel concept to solve this activity-stability trade-off. This unique fence has the characteristics of preventing poisonous species from invading catalysts, but allowing catalytic reaction-related species to diffuse freely. We applied this concept to construct CoS2 layer with the function of molecular selectivity on the external surface of highly active Co doped MoS2, achieving a remarkable catalytic stability towards alkaline hydrogen evolution reaction, along with a further optimized activity. In situ spectroscopy technologies uncovered the underlying molecule mechanism of the CoS2 fence for breaking the activity-stability trade-off of the MoS2 catalyst. This work offers valuable guidance for rationally designing efficient and stable NPM catalysts.

Mo/P Dual-Doped Co/Oxygen-Deficient Co3O4 Core-Shell Nanorods Supported on Ni Foam for Electrochemical Overall Water Splitting

The exploration for low-cost bifunctional materials for highly efficient overall water splitting has drawn profound research attention. Here, we present a facile preparation of Mo-P dual-doped Co/oxygen-deficient Co₃O₄ core-shell nanorods as a highly efficient electrocatalyst. In this strategy, oxygen vacancies are first generated in Co₃O₄ nanorods by lithium reduction at room temperature, which endows the materials with bifunctional characteristics of the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). A Co layer doped with Mo and P is further deposited on the surface of the Co₃O_4-x nanorods to enhance the electrocatalytic hydrolysis performance. As a result, the overpotentials of HER and OER are only 281 and 418 mV at a high current density of 100 mA cm^-2 in 1.0 M KOH, respectively. An overall water electrolytic cell using CoMoP@Co₃O_4-x nanorods as both electrodes can reach 10 mA cm^-2 at 1.614 V with outstanding durability. The improvement is realized by the synergistic effect of oxygen vacancies, Mo/P doping, and core-shell heterostructures for modulating the electronic structure and producing more active sites, which suggests a promising method for developing cost-effective and stable electrocatalysts.

Insights into the Interfacial Lewis Acid-Base Pairs in CeO2 -Loaded CoS2 Electrocatalysts for Alkaline Hydrogen Evolution

Despite the known efficacy of CeO₂ as a promoter in alkaline hydrogen evolution reaction (HER), the underlying mechanism of this effect remains unclear. CoS₂ , a pyrite-type alkaline HER electrocatalyst, suffers from sluggish HER kinetics and severe catalyst leaching due to its weak water dissociation kinetics and oxygen-related corrosion. Herein, it is demonstrated that the interfacial Lewis acid-base Ce∙∙∙S pairs in CeO₂ -loaded CoS₂ effectively improve the catalytic activity and durability. In CeO₂ -loaded CoS₂ nanowire array electrodes, these interfacial Lewis acid-base Ce∙∙∙S pairs with unique electronic and structural configurations efficiently activate water adsorptive dissociation and kinetically accelerate hydrogen evolution, delivering a low overpotential of 36 mV at 10 mA cm^-2 in alkaline media. Such Ce∙∙∙S pairs also weaken O₂ adsorption on CoS₂ , leading to undecayed activity over 1000 h. These findings are expected to provide guidance for the design of CeO₂ -based electrocatalysts as well as other hybrid electrocatalysts for water splitting.

Solid-state synthesis of single-phase nickel monophosphosulfide for the oxygen evolution reaction

High-performance and cost-effective nonprecious-metal catalysts are essential for the next-generation oxygen evolution reaction (OER). However, the electrocatalysis of the OER during water splitting is often carried out by using noble metal catalysts, such as RuO₂ or IrO₂ with high-cost and limited stability. Herein, we reported a successful synthesis of a ternary nickel monophosphosulfide (NiPS) compound via a simple solid-state route and further investigated its electrocatalytic performances for water oxidation. It is found that the NiPS electrocatalyst exhibits good OER performance in 1.0 M KOH solution, i.e., achieving a current density of 20 mA cm^-2 at an overpotential of 400 mV and a Tafel slope of 126 mV dec^-1, comparable to commercial benchmark RuO₂. The ternary NiPS electrocatalyst for the OER is superior to its binary counterparts, i.e., Ni₂P and NiS. Density functional theory (DFT) calculations combined with ex situ XPS were performed to obtain further insights into the intrinsic catalytic mechanism of NiPS, and their results clearly revealed that the instability of the NiO intermediate during the OH* → O* process and the easy oxidation of the (PS)^3- anion favoring the formation of hydroxyl-based species (i.e., Ni(OH)₂/NiOOH) on the surface of the catalyst, which plays a crucial role in facilitating the OER activity. Furthermore, we creatively extended this method to the fabrication of heteroatom substituted catalysts and a new quaternary CoNiP₂S₂ compound was successfully synthesized for the first time in the same way. The structural properties and electrocatalytic performance towards the OER for CoNiP₂S₂ (e.g., 20 mA cm^-2 at 376 mV) are also systematically investigated in this work.

Hierarchical molybdenum-doped NiCoP@carbon microspheres: a highly-efficient electrocatalyst for the hydrogen evolution reaction

Herein, we present hierarchical Mo-doped NiCoP@carbon microspheres that exhibit a noticeable enhancement in catalytic activity and fast kinetics for hydrogen evolution. An overpotential of 74.6 mV at 10 mA cm^-2 and 54.9 mV dec^-1 can be achieved. These results demonstrated the excellent electrochemical properties arising from the intrinsic characteristics of elemental doping and morphology control. We believe that this work opens a new avenue to fabricating TMD-based catalysts via the engineering of transition metal compounds.

Reactivity and Potential Profile across the Electrochemical LiCoO2-Li3PS4 Interface Probed by Operando X-ray Photoelectron Spectroscopy

All-solid-state lithium batteries are a promising alternative for next-generation safe energy storage devices, provided that parasitic side reactions and the resulting hindrances in ionic transport at the electrolyte-electrode interface can be overcome. Motivated by the need for a fundamental understanding of such an interface, we present here real-time measurements of the (electro-)chemical reactivity and local surface potential at the electrified interface (Li₂S)₃-P₂S₅ (LPS) and LiCoO₂ (LCO) using operando X-ray photoelectron spectroscopy (XPS) supplemented by X-ray photoemission electron microscopy (XPEEM). We identify three main degradation mechanisms: (i) reactivity at open circuit potential leading to the formation of reduced Co in the +2 oxidation state at the LCO surface, detected in the Co L-edge, which is further increased upon cycling, (ii) onset of electrochemical oxidation of the LPS at 2.3 V vs InLi_x detected in the S 2p and P 2p core levels, and (iii) Co-ion diffusion into the LPS forming CoS_x species at 3.3 V observed in both S 2p and Co 2p core levels. Concurrently, a local surface overpotential of 0.9 V caused by a negative localized charge layer is detected at the LPS-LCO interface. Furthermore, in agreement with previous theoretical results, the presence of a sharp potential drop at the interface between active materials and solid electrolyte is demonstrated in all-solid-state batteries.

Phosphorized CoNi2S4 Yolk-Shell Spheres for Highly Efficient Hydrogen Production via Water and Urea Electrolysis

Exploring earth-abundant electrocatalysts with excellent activity, robust stability, and multiple functions is crucial for electrolytic hydrogen generation. Herein, porous phosphorized CoNi 2 S 4 yolk-shell spheres (P-CoNi 2 S 4 YSSs) are rationally designed and synthesized by a combined hydrothermal sulfidation and gas-phase phosphorization strategy. Benefiting from the strengthened Ni 3+ /Ni 2+ couple, enhanced electric conductivity, and hollow structure, the P-CoNi 2 S 4 YSSs exhibit excellent activity and durability towards hydrogen/oxygen evolution and urea oxidation reactions in alkaline solution, affording low potentials of -0.135 V, 1.512 V, and 1.306 V (versus reversible hydrogen electrode) at 10 mA cm -2 , respectively. Remarkably, when used as the anode and cathode simultaneously, the P-CoNi 2 S 4 catalyst merely requires a cell voltage of 1.544 V in water splitting and 1.402 V in urea electrolysis to attain 10 mA cm -2 with excellent durability for 100 h, outperforming most of the reported nickel-based sulfides and even noble-metal-based electrocatalysts. This work therefore not only promotes the application of sulfides in electrochemical hydrogen production but also provides a feasible approach for urea-rich wastewater treatment.

Clean and Affordable Hydrogen Fuel from Alkaline Water Splitting: Past, Recent Progress, and Future Prospects

Hydrogen economy has emerged as a very promising alternative to the current hydrocarbon economy, which involves the process of harvesting renewable energy to split water into hydrogen and oxygen and then further utilization of clean hydrogen fuel. The production of hydrogen by water electrolysis is an essential prerequisite of the hydrogen economy with zero carbon emission. Among various water electrolysis technologies, alkaline water splitting has been commercialized for more than 100 years, representing the most mature and economic technology. Here, the historic development of water electrolysis is overviewed, and several critical electrochemical parameters are discussed. After that, advanced nonprecious metal electrocatalysts that emerged recently for negotiating the alkaline oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are discussed, including transition metal oxides, (oxy)hydroxides, chalcogenides, phosphides, and nitrides for the OER, as well as transition metal alloys, chalcogenides, phosphides, and carbides for the HER. In this section, particular attention is paid to the catalyst synthesis, activity and stability challenges, performance improvement, and industry-relevant developments. Some recent works about scaled-up catalyst synthesis, novel electrode designs, and alkaline seawater electrolysis are also spotlighted. Finally, an outlook on future challenges and opportunities for alkaline water splitting is offered, and potential future directions are speculated.

Transition Metal-Based 2D Layered Double Hydroxide Nanosheets: Design Strategies and Applications in Oxygen Evolution Reaction

Water splitting driven by renewable energy sources is considered a sustainable way of hydrogen production, an ideal fuel to overcome the energy issue and its environmental challenges. The rational design of electrocatalysts serves as a critical point to achieve efficient water splitting. Layered double hydroxides (LDHs) with two-dimensionally (2D) layered structures hold great potential in electrocatalysis owing to their ease of preparation, structural flexibility, and tenability. However, their application in catalysis is limited due to their low activity attributed to structural stacking with irrational electronic structures, and their sluggish mass transfers. To overcome this challenge, attempts have been made toward adjusting the morphological and electronic structure using appropriate design strategies. This review highlights the current progress made on design strategies of transition metal-based LDHs (TM-LDHs) and their application as novel catalysts for oxygen evolution reactions (OERs) in alkaline conditions. We describe various strategies employed to regulate the electronic structure and composition of TM-LDHs and we discuss their influence on OER performance. Finally, significant challenges and potential research directions are put forward to promote the possible future development of these novel TM-LDHs catalysts.

CoPSe: A New Ternary Anode Material for Stable and High-Rate Sodium/Potassium-Ion Batteries

The exploration of ideal electrode materials overcoming the critical problems of large electrode volume changes and sluggish redox kinetics induced by large ionic radius of Na⁺ /K⁺ ions is highly desirable for sodium/potassium-ion batteries (SIBs/PIBs) toward large-scale applications. The present work demonstrates that single-phase ternary cobalt phosphoselenide (CoPSe) in the form of nanoparticles embedded in a layered metal-organic framework (MOF)-derived N-doped carbon matrix (CoPSe/NC) represents an ultrastable and high-rate anode material for SIBs/PIBs. The CoPSe/NC is fabricated by using the MOF as both a template and precursor, coupled with in situ synchronous phosphorization/selenization reactions. The CoPSe anode holds a set of intrinsic merits such as lower mechanical stress, enhanced reaction kinetics, as well as higher theoretical capacity and lower discharge voltage relative to its counterpart of CoSe₂ , and suppressed shuttle effect with higher intrinsic electrical conductivity relative to CoPS. The involved mechanisms are evidenced by substantial characterizations and density functional theory (DFT) calculations. Consequently, the CoPSe/NC anode shows an outstanding long-cycle stability and rate performance for SIBs and PIBs. Moreover, the CoPSe/NC-based Na-ion full cell can achieve a higher energy density of 274 Wh kg^-1 , surpassing that based on CoSe₂ /NC and most state-of-the-art Na-ion full cells based on P-, Se-, or S-containing binary/ternary anodes to date.

Novel B-N-Co surface bonding states constructed on hollow tubular boron doped g-C3N4/CoP for enhanced photocatalytic H2 evolution

Graphitic carbon nitride (g-C₃N₄) is a promising photocatalyst for water hydrogen evolution. Nonetheless, fast recombination of photogenerated electron-hole pairs and the slow kinetics of hydrogen production result in the unsatisfactory efficiency of solar hydrogen production. we address this issue by anchoring the cobalt phosphide (CoP) cocatalyst onto the one-dimensional boron doped g-C₃N₄ nanotube (B-CNNT) to construct B-N-Co surface bonding states in the B-CNNT/CoP photocatalyst. Spectroscopic measurement and density functional theory (DFT) calculations demonstrated that the B-N-Co bonds optimize the local electronic distribution of bonded Co and adjacent P atoms, strengthen the electrons' delocalization capacity of Co atoms for high electrical conductivity and accelerate the photogenerated carrier transfer between B-CNNT and CoP, which lead to the enhanced photocatalytic activity of the B-CNNT/CoP photocatalyst for hydrogen evolution. B-CNNT/CoP-2.45% achieved a remarkable photocatalytic hydrogen production rate of 784 μmol g^-1h^-1 with an apparent quantum efficiency of 5.32% at 420 nm, which is significantly higher than demonstrated by CNNT/CoP-2.45% (153 μmol g^-1h^-1). Our findings provide insights into as well as establish theoretical and practical grounds for the development of low-cost, high-performance photocatalytic materials for hydrogen evolution.

Rational Design and Controlled Synthesis of V-Doped Ni3 S2 /Nix Py Heterostructured Nanosheets for the Hydrogen Evolution Reaction

Rational construction of high-efficiency and low-cost catalysts is one of the most promising ways to produce hydrogen but remains a huge challenge. Herein, interface engineering and heteroatom doping were used to synthesize V-doped sulfide/phosphide heterostructures on nickel foam (V-Ni₃ S₂ /Ni_x P_y /NF) by phosphating treatment at low temperature. The incorporation of V can adjust the electronic structure of Ni₃ S₂ , expose more active sites, and protect the 3D structure of Ni foam from damage. Meanwhile, the heterogeneous interface formed between Ni₃ S₂ and Ni_x P_y can provide abundant active sites and accelerate electron transfer. As a result, the V-Ni₃ S₂ /Ni_x P_y /NF nanosheet catalyst exhibits outstanding activity in the hydrogen evolution reaction (HER) with an extremely low overpotential of 90 mV at a current density of 10 mA cm^-2 and stable durability in alkaline solution, which exceeds those most of the previously reported Ni-based materials. This work shows that rational design by interfacial engineering and metal-atom incorporation has a significant influence for efficient hydrogen evolution.

Al-doped nickel sulfide nanosheet arrays as highly efficient bifunctional electrocatalysts for overall water splitting

The development of low-cost, high-activity, durable non-precious metal bifunctional electrocatalysts is of great importance in the production of hydrogen by water electrolysis. In this work, we have prepared new Al-doped Ni₃S₂ nanosheet arrays grown on Ni foam (Al-Ni₃S₂/NF) as an excellent bifunctional electrocatalyst in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The Al-Ni₃S₂/NF electrode obtained only requires extremely low overpotentials of 86 and 223 mV for the HER and OER to achieve a current density of 10 mA cm^-2 in 1 M KOH, respectively. Moreover, the electrolytic cell assembled using this electrode as both cathode and anode provides a current density of 10 mA cm^-2 at an extremely low battery voltage of 1.58 V relative to that with Ni₃S₂/NF (1.71 V). Additionally, both experimental results and theoretical calculations reveal that the increased electrochemical active surface area and optimized intermediate adsorption free energies are responsible for the enhanced electrocatalytic performance. This work provides a promising bifunctional electrocatalyst for water electrolysis in alkaline media with broad application prospects.

Phosphate Ion-Functionalized CoS with Hexagonal Bipyramid Structures from a Metal-Organic Framework: Bifunctionality towards Supercapacitors and Oxygen Evolution Reaction

To solve energy-related environmental problems and the energy crisis, efficient electrochemical materials have been developed as alternative energy storage and conversion systems. Abundant transition metals and their sulfides are attractive electrochemical materials. Herein, we report an efficient phosphorization strategy, which improves the overall electrochemical performance of metal sulfides. In detail, CoS hexagonal bipyramids were synthesized through simple calcination combined with in situ sulfurization of a cobalt-based metal-organic framework template, and then phosphate ion-functionalized CoS (P-CoS) was prepared through a phosphorization reaction. P-CoS exhibited outstanding electrochemical activity as both supercapacitor electrode and oxygen evolution reaction (OER) catalyst. Supercapacitors based on CoS and P-CoS as the electrodes had high specific capacitances of 304 and 442 F g^-1 , respectively, and remained stable for over 10 000 cycles at 5 A g^-1 . For OER, P-CoS showed a current density of 10 mA cm^-2 at an overpotential of 340 mV, with a small Tafel slope. In conclusion, functionalizing CoS with phosphate ions is a promising method for enhancing chemical reactivity and accelerating ion and electron transfer.

Enhancing bifunctional catalytic activity of cobalt-nickel sulfide spinel nanocatalysts through transition metal doping and its application in secondary zinc-air batteries

Developing large-scale and high-performance OER (oxygen evolution reaction) and ORR (oxygen reduction reaction) catalysts have been a challenge for commercializing secondary zinc-air batteries. In this work, transition metal-doped cobalt-nickel sulfide spinels are directly produced via a continuous hydrothermal flow synthesis (CHFS) approach. The nanosized cobalt-nickel sulfides are doped with Ag, Fe, Mn, Cr, V, and Ti and evaluated as bifunctional OER and ORR catalyst for Zn-air battery application. Among the doped spinel catalysts, Mn-doped cobalt-nickel sulfides (Ni1.29Co1.49Mn0.22S4) exhibit the most promising OER and ORR performance, showing an ORR onset potential of 0.9 V vs. RHE and an OER overpotential of 348 mV measured at 10 mA cm-2, which is attributed to their high surface area, electronic structure of the dopant species, and the synergistic coupling of the dopant species with the active host cations. The dopant ions primarily alter the host cation composition, with the Mn(iii) cation linked to the introduction of active sites by its favourable electronic structure. A power density of 75 mW cm-2 is achieved at a current density of 140 mA cm-2 for the zinc-air battery using the manganese-doped catalyst, a 12% improvement over the undoped cobalt-nickel sulfide and superior to that of the battery with a commercial RuO2 catalyst.