Controlling the volatility of the written optical state in electrochromic DNA liquid crystals

DNA liquid crystals with AIE effect toward humidity-indicating biomaterials

In this study, by fabricating DNA doped with tetraphenylethene-containing ammonium surfactant, the resulting solvent-free DNA ionic complex could undergo a humidity-induced phase change that could be well tracked by the fluorescence signal of the surfactant. Taking advantage of the humidity-induced change in fluorescence, the reported ionic DNA complex could accurately indicate the humidity in real time.

Azobenzene-containing surfactant directs small features of DNA thermotropic liquid crystals via bottom-up and top-down strategies

Compared to classical block copolymers, the self-assembly of small molecules shows an advantage in addressing small features. As a new type of solvent-free ionic complexes, azobenzene-containing DNA thermotropic liquid crystals (TLCs) form an assembly as block copolymers when using small DNA. However, the self-assembly behavior of such biomaterials has not been fully investigated. In this study, photoresponsive DNA TLCs are fabricated by employing an azobenzene-containing surfactant with double flexible chains. For these DNA TLCs, the self-assembly behavior of DNA and surfactants could be guided by the factors of the molar ratio of azobenzene-containing surfactant, dsDNA/ssDNA, and presence or absence of water, which addresses the bottom-up control on domain spacing of mesophase. Meanwhile, such DNA TLCs also gain top-down control on morphology via photoinduced phase change. This work would provide a strategy for regulating the small features of solvent-free biomaterials, facilitating the development of patterning templates based on photoresponsive biomaterials. STATEMENT OF SIGNIFICANCE: The relationship between nanostructure and function is attractive in the science of biomaterials. With biocompatibility and degradability, photoresponsive DNA materials in solutions have been widely studied in biological and medical areas, but they are still hard to obtain in a condensed state. The complex created with designed azobenzene-containing surfactants paves the way for obtaining condensed photoresponsive DNA materials. However, fine control of the small features of such biomaterials has not yet been achieved. In this study, we present a bottom-up strategy of controlling the small features of such DNA materials and, simultaneously, the top-down control of morphology via photoinduced phase change. This work provides a bi-directional approach to controlling the small features of condensed biomaterials.

Emerging Electrochromic Materials and Devices for Future Displays

With the rapid development of optoelectronic fields, electrochromic (EC) materials and devices have received remarkable attention and have shown attractive potential for use in emerging wearable and portable electronics, electronic papers/billboards, see-through displays, and other new-generation displays, due to the advantages of low power consumption, easy viewing, flexibility, stretchability, etc. Despite continuous progress in related fields, determining how to make electrochromics truly meet the requirements of mature displays (e.g., ideal overall performance) has been a long-term problem. Therefore, the commercialization of relevant high-quality products is still in its infancy. In this review, we will focus on the progress in emerging EC materials and devices for potential displays, including two mainstream EC display prototypes (segmented displays and pixel displays) and their commercial applications. Among these topics, the related materials/devices, EC performance, construction approaches, and processing techniques are comprehensively disscussed and reviewed. We also outline the current barriers with possible solutions and discuss the future of this field.

Engineering DNA-Guided Hydroxyapatite Bulk Materials with High Stiffness and Outstanding Antimicrobial Ability for Dental Inlay Applications

Programmable base pair interactions at the nanoscale make DNA an attractive scaffold for forming hydroxyapatite (HAP) nanostructures. However, engineering macroscale HAP mineralization guided by DNA molecules remains challenging. To overcome this issue, a facile strategy is developed for the fabrication of ultrastiff DNA-HAP bulk composites. The electrostatic complexation of DNA and a surfactant with a quaternary ammonium salt group enables the formation of long-range ordered scaffolds using electrospinning. The growth of 1D and 2D HAP minerals is thus realized by this DNA template at a macroscale. Remarkably, the as-prepared DNA-HAP composites exhibit an ultrahigh Young's modulus of ≈25 GPa, which is comparable to natural HAP and superior to most artificial mineralized composites. Furthermore, a new type of dental inlay with outstanding antibacterial properties is developed using the stiff DNA-HAP. The encapsulated quaternary ammonium group within the dense HAP endows the composite with long-lasting and local antibacterial activity. Therefore, this new type of super-stiff biomaterial holds great potential for oral prosthetic applications.

Thermodynamic stability of cis-azobenzene containing DNA materials based on van der Waals forces

Taking advantage of van der Waals forces, an azobenzene-containing surfactant with a stable cis-state was designed and synthesized to fabricate photoresponsive DNA material. The reported DNA material exhibited reversible liquid crystalline-to-isotropic liquid transition under UV/Vis illuminations via the trans-cis isomerization of azobenzene. It also gained the ability to maintain the isotropic liquid state after UV light had ceased thanks to the thermodynamic stability of the cis-isomer of the azobenzene-containing surfactant. This work provides a design strategy for fabricating photoresponsive phase-change biomaterials.

DNA Optoelectronics: Versatile Systems for On-Demand Functional Electrochemical Applications

Herein, we propose innovative deoxyribonucleic acid (DNA)-based gels and their applications in diverse optoelectronics. We prepared the optoelectronic DNA-based gels (^OpDNA Gel) through molecular complexation, that is, groove binding and ionic interactions of DNA and 1,1'-diheptyl-4,4'-bipyridinium (DHV). This process is feasible even with sequence-nonspecific DNA extracted from nature (e.g., salmon testes), resulting in the expansion of the application scope of DNA-based gels. ^OpDNA Gel possessed good mechanical characteristics (e.g., high compressibility, thermoplasticity, and outstanding viscoelastic properties) that have not been observed in typical DNA hydrogels. Moreover, the electrochromic (EC) characteristics of DHV were not lost when combined with ^OpDNA Gel. By taking advantage of the facile moldability, voltage-tunable EC behavior, and biocompatibility/biodegradability of ^OpDNA Gel, we successfully demonstrated its applicability in a variety of functional electrochemical systems, including on-demand information coding systems, user-customized EC displays, and microorganism monitoring systems. The ^OpDNA Gel is a promising platform for the application of DNA-based biomaterials in electrochemical optoelectronics.

Photoregulative phase change biomaterials showing thermodynamic and mchanical stabilities

Azobenzenes are great photochromic molecules for switching the physical properties of various materials via trans-cis isomerization. However, the UV light resulted cis-azobenzene is metastable and thermodynamically gets back to trans-azobenzene after ceasing UV irradiation, which causes an unwanted property change of azobenzene-containing materials. Additionally, thermal and mechanical conditions would accelerate this process dramatically. In this present work, a new type of azobenzene-containing surfactant is designed for the fabrication of photoresponsive phase change biomaterials. With a "locked" cis-azobenzene conformation, the resulting biomaterials could maintain their disordered state after ceasing UV light, which exhibit great resistance to thermal and piezo conditions. Interestingly, the "locked" cis-azobenzene could be unlocked by Vis light in high efficiency, which opens a new way for the design of phase change materials only responding to light. By showing stable cis-azobenzene maintained physical state, the newly fabricated biomaterials provide new potential for the construction of advanced materials, like self-healing materials, with less use of long time UV irradiation for maintaining their disordered states.

Highly Stiff and Stretchable DNA Liquid Crystalline Organogels with Super Plasticity, Ultrafast Self-Healing, and Magnetic Response Behaviors

DNA-based gels are attractive materials as they allow intuitive rational design, respond to external physicochemical stimuli, and show great potential for biomedical applications. However, their relatively poor mechanical properties currently limit their technological application considerably as the latter requires mechanical integrity and tunability. With this work, a DNA organogel is reported that gels through supramolecular interactions, which induce mesophase ordering, and that exhibits exceptional stretchability, deformability, plasticity, and biocompatibility. Moreover, the nature of the supramolecular bond enables complete self-healing within 3 s. Most importantly, the DNA-based liquid crystalline organogels exhibit impressive ultimate tensile strengths above 1 MPa, stiffness higher than 20 MPa, and toughness up to 18 MJ m^-3 , rendering these materials the strongest among reported DNA networks. In addition, the facile access is demonstrated to composite DNA materials by blending magnetic nanoparticles with the organogel matrix giving access to magnetic field induced actuation. It is believed that these findings contribute significantly to the advancement of DNA gels for their use in smart materials and biomedical applications.

Photoswitchable solvent-free DNA thermotropic liquid crystals toward self-erasable shape information recording biomaterials

Soft thermotropic liquid crystals (TLCs) have advantages on processability and shape memory compared to hard solids and fluids. The development of photoswitchable soft TLCs based on biomolecules would afford reworkable shape information recording biomaterials for the areas requiring biocompatibility and degradability. In recent years, anhydrous DNA TLCs composed of DNA and ammonium surfactants have been receiving continuous attention. However, the photoswitchable phase transition has not been realized for soft DNA TLCs at room temperature, owing to the absence of functional ammonium surfactant. Herein, a new type of azobenzene-containing surfactant would be applied to the fabrication of soft DNA TLCs with photoresponsive physical properties. The double-chain design of the used surfactant and the use of DOAB as a dopant guarantee the soft state of DNA TLCs at r.t., which also facilitates the azobenzene isomerization by reducing the packing density of surfactants. With the assistance of photoisomerization of azobenzene, the reported DNA TLCs achieve reversible liquid crystal-isotropic liquid transition at temperatures below clearing points even at room temperature. The repeatable shape information recording and self-erasing tests indicate these DNA TLCs would be good shape information recording biomaterials in the future. This work also provides a useful strategy for designing photoresponsive soft biomaterials based on rigid biomolecules like DNA.

Photoliquefiable DNA-surfactant ionic crystals: Anhydrous self-healing biomaterials at room temperature

Development of photoliquefiable solid-state biomaterials at room temperature would address scientific challenges in life science. However, external stimuli-induced phase transitions are difficult for some biomacromolecules based materials, due to the high rigidity of these biomolecules. In this present work, by delicate molecule design on azobenzene-type ammonium surfactants, two new types of DNA-surfactant materials are fabricated. At room temperature, these DNA materials show photoliquefaction of ionic crystals to isotropic liquids under UV light, and fast self-assembly from isotropic liquids back to crystals after ceasing UV light, under the assistance of azobenzene isomerization. To achieve this objective, the designed solid-state DNA materials should have melting points near room temperature and an immediate liquid crystal to isotropic liquid transition process just above the melting points, which highly depends on the stoichiometric charge ratio between DNA and surfactants. As proved by the successful self-healing tests, these DNA ionic crystals are good biomaterials with potential applications in biomedicine and life science. This work would provide a new strategy for designing anhydrous functional biomaterials at room temperature by using rigid biomacromolecules. STATEMENT OF SIGNIFICANCE: At room temperature, solid-state biomaterials with photoregulated crystal⇄isotropic liquid phase transition property are attractive functional materials in life science, considering the body temperature and living environment temperature of human beings. Although several kinds of anhydrous materials achieved isothermal photoresponsive phase transitions, the photoregulated phase transition of anhydrous biomacromolecules based materials has not been achieved at room temperature, due to the high rigidity of these biomolecules. In this work, by delicate molecule design on ammonium surfactants, we synthesized two kinds of anhydrous DNA-surfactants ionic crystals. These DNA materials show fast photoliquefaction under UV light and self-assembly after ceasing light, which affords excellent self-healing biomaterials. This work would provide a new strategy for designing anhydrous photoresponsive biomaterials by using rigid biomacromolecules.

DNA thermotropic liquid crystals controlled by positively charged catanionic bilayer vesicles

We report DNA thermotropic liquid crystal (TLC) formation by positively charged catanionic surfactant bilayer vesicles. The properties of DNA TLCs were found to be manipulated by both the chemical structures of cationic and anionic surfactants and the DNA amount. Positively charged catanionic bilayer vesicles bond to negative DNA sites resulting in the transition from vesicles to long range ordered lamellar crystals of DNA-catanionic surfactants, as confirmed by cryo- and freeze-fracture (FF) TEM observations and small-angle X-ray scattering (SAXS) measurements.

Electrostatically PEGylated DNA enables salt-free hybridization in water

Chemically modified nucleic acids have long served as a very important class of bio-hybrid structures. In particular, the modification with PEG has advanced the scope and performance of oligonucleotides in materials science, catalysis and therapeutics. Most of the applications involving pristine or modified DNA rely on the potential of DNA to form a double-stranded structure. However, a substantial requirement for metal-cations to achieve hybridization has restricted the range of applications. To extend the applicability of DNA in salt-free or low ionic strength aqueous medium, we introduce noncovalent DNA-PEG constructs that allow canonical base-pairing between individually PEGylated complementary strands resulting in a double-stranded structure in salt-free aqueous medium. This method relies on grafting of amino-terminated PEG polymers electrostatically onto the backbone of DNA, which results in the formation of a PEG-envelope. The specific charge interaction of PEG molecules with DNA, absolute absence of metal ions within the PEGylated DNA molecules and formation of a double helix that is significantly more stable than the duplex in an ionic buffer have been unequivocally demonstrated using multiple independent characterization techniques.

Photoregulation between small DNAs and reversible photochromic molecules

Oligonucleotides are widely used biological materials in the fields of biomedicine, nanotechnology, and materials science. Due to the demands for the photoregulation of DNA activities, scientists are placing more and more research interest in the interactions between reversible photochromic molecules and DNAs. Photochromic molecules can work as switches for regulating the DNAs' behavior under light irradiation; meanwhile, DNAs also exert influence over the photochromic molecules. The photochromic molecules can be attached to DNAs either by covalent bonds or by noncovalent forces, which results in different regulative functions. Azobenzenes, spiropyrans, diarylethenes, and stilbene-like compounds are important photochromic molecules working as photoswitches. By summarizing their interactions with oligonucleotides, this review intends to facilitate the relevant research on oligonucleotides/photochromic molecules in the biological and medicinal fields and in materials science.

Amplification of Chirality by Adenosine Monophosphate-Capped Luminescent Gold Nanoclusters in Nematic Lyotropic Chromonic Liquid Crystal Tactoids

Amplification of chirality across length scales is a key concept pertinent to many models aiming to unravel the origin of homochirality. Tactoids of lyotropic chromonic liquid crystals formed by DNA, dyes, and other flat ionic molecules in water in the biphasic nematic + isotropic regime turn out to be a particularly relevant system to investigate chirality transfer and amplification. Herein, we present experiments to determine the amplification of chirality by luminescent gold nanoclusters decorated with adenosine monophosphate inducing chiral nematic tactoids formed by disodium cromoglycate in water. Polarized optical microscopy investigations of the induced homochiral tactoids reveal that adenosine monophosphate shows a higher optical activity when bound to the surface of such gold nanoclusters in comparison to free adenosine monophosphate, despite a three-time lower overall concentration. Free adenosine monophosphate also induces the opposite chiral twist both in the bulk nematic phase as shown by induced thin film circular dichroism spectropolarimetry and in the tactoids in comparison to adenosine monophosphate bound to the gold nanocluster. Overall, these experiments demonstrate that lyotropic chromonic liquid crystal tactoids are powerful systems to image and quantify chirality amplification by key biological chiral molecules that would have played a role in the origin of homochirality.

Ionic-surfactants-based thermotropic liquid crystals

Ionic surfactants can be combined with various functional groups through electrostatic interaction, resulting in a series of thermotropic liquid crystals (TLCs).

Chirality amplification by desymmetrization of chiral ligand-capped nanoparticles to nanorods quantified in soft condensed matter

Induction, transmission, and manipulation of chirality in molecular systems are well known, widely applied concepts. However, our understanding of how chirality of nanoscale entities can be controlled, measured, and transmitted to the environment is considerably lacking behind. Future discoveries of dynamic assemblies engineered from chiral nanomaterials, with a specific focus on shape and size effects, require exact methods to assess transmission and amplification of nanoscale chirality through space. Here we present a remarkably powerful chirality amplification approach by desymmetrization of plasmonic nanoparticles to nanorods. When bound to gold nanorods, a one order of magnitude lower number of chiral molecules induces a tighter helical distortion in the surrounding liquid crystal-a remarkable amplification of chirality through space. The change in helical distortion is consistent with a quantification of the change in overall chirality of the chiral ligand decorated nanomaterials differing in shape and size as calculated from a suitable pseudoscalar chirality indicator.

Tuning the Mesomorphism and Redox Response of Anionic-Ligand-Based Mixed-Valent Nickel(II) Complexes by Alkyl-Substituted Quaternary Ammonium Cations

The combination of the redox-active mesogenic anion [Ni^II (Bdt)(BdtSQ)]^- (Bdt=1,2-benzenedithiolato; BdtSQ=1,2-dithia-semi-benzoquinonato) with alkyl-substituted ammonium cations afforded a series of redox-active ionic complexes of the type [NR₄ ][Ni^II (Bdt)(BdtSQ)] [R=nC₁₆ H₃₃ (NC16₄ Ni) and C8,10 (NC8,10₄ Ni); C8,10=6-octylhexadecyl] or [NMe₂ R₂ ][Ni^II (Bdt)(BdtSQ)] [R=nC₁₆ H₃₃ (NMe₂ C16₂ Ni) and C8,10 (NMe₂ C8,10₂ Ni)]. X-ray crystallographic analyses of NMe₂ C16₂ Ni and NC16₄ Ni revealed the formation of cation-dependent integrated ionic layers separated by interdigittated alkyl chains. Complexes NMe₂ C16₂ Ni and NC16₄ Ni commonly form crystalline phases at room temperature, whereas complexes NMe₂ C8,10₂ Ni and NC8,10₄ Ni, which contain branched alkyl chains, form a metastable mesophase and an amorphous phase at the same temperature, respectively. Furthermore, complexes NMe₂ C16₂ Ni, NMe₂ C8,10₂ Ni, and NC16₄ Ni commonly form a smectic A phase (SmA) at 375, 317, and 342 K, respectively. For the four complexes, well-defined cyclic voltammetry responses, derived from ligand-based oxidation and reduction, were observed in solution and the condensed phases, that is, upon casting these complexes on an indium-doped tin oxide working electrode. The present study demonstrates the tunability of the mesomorphism of ionic molecular assemblies composed of alkyl-substituted quaternary ammonium cations, while maintaining the well-defined redox responses of the anions even in the condensed phases.

DNA-surfactant complexes: self-assembly properties and applications

Over the last few years, DNA-surfactant complexes have gained traction as unique and powerful materials for potential applications ranging from optoelectronics to biomedicine because they self-assemble with outstanding flexibility spanning packing modes from ordered lamellar, hexagonal and cubic structures to disordered isotropic phases. These materials consist of a DNA backbone from which the surfactants protrude as non-covalently bound side chains. Their formation is electrostatically driven and they form bulk films, lyotropic as well as thermotropic liquid crystals and hydrogels. This structural versatility and their easy-to-tune properties render them ideal candidates for assembly in bulk films, for example granting directional conductivity along the DNA backbone, for dye dispersion minimizing fluorescence quenching allowing applications in lasing and nonlinear optics or as electron blocking and hole transporting layers, such as in LEDs or photovoltaic cells, owing to their extraordinary dielectric properties. However, they do not only act as host materials but also function as a chromophore itself. They can be employed within electrochromic DNA-surfactant liquid crystal displays exhibiting remarkable absorptivity in the visible range whose volatility can be controlled by the external temperature. Concomitantly, applications in the biological field based on DNA-surfactant bulk films, liquid crystals and hydrogels are rendered possible by their excellent gene and drug delivery capabilities. Beyond the mere exploitation of their material properties, DNA-surfactant complexes proved outstandingly useful for synthetic chemistry purposes when employed as scaffolds for DNA-templated reactions, nucleic acid modifications or polymerizations. These promising examples are by far not exhaustive but foreshadow their potential applications in yet unexplored fields. Here, we will give an insight into the peculiarities and perspectives of each material and are confident to inspire future developments and applications employing this emerging substance class.

Nematic DNA Thermotropic Liquid Crystals with Photoresponsive Mechanical Properties

Over the last decades, water-based lyotropic liquid crystals of nucleic acids have been extensively investigated because of their important role in biology. Alongside, solvent-free thermotropic liquid crystals (TLCs) from DNA are gaining great interest, owing to their relevance to DNA-inspired optoelectronic applications. Up to now, however, only the smectic phase of DNA TLCs has been reported. The development of new mesophases including nematic, hexagonal, and cubic structures for DNA TLCs remains a significant challenge, which thus limits their technological applications considerably. In this work, a new type of DNA TLC that is formed by electrostatic complexation of anionic oligonucleotides and cationic surfactants containing an azobenzene (AZO) moiety is demonstrated. DNA-AZO complexes form a stable nematic mesophase over a temperature range from -7 to 110 °C and retain double-stranded DNA structure at ambient temperature. Photoisomerization of the AZO moieties from the E- to the Z-form alters the stiffness of the DNA-AZO hybrid materials opening a pathway toward the development of DNA TLCs as stimuli-responsive biomaterials.

Liquefaction of Biopolymers: Solvent-free Liquids and Liquid Crystals from Nucleic Acids and Proteins

Biomacromolecules, such as nucleic acids, proteins, and virus particles, are persistent molecular entities with dimensions that exceed the range of their intermolecular forces hence undergoing degradation by thermally induced bond-scission upon heating. Consequently, for this type of molecule, the absence of a liquid phase can be regarded as a general phenomenon. However, certain advantageous properties usually associated with the liquid state of matter, such as processability, flowability, or molecular mobility, are highly sought-after features for biomacromolecules in a solvent-free environment. Here, we provide an overview over the design principles and synthetic pathways to obtain solvent-free liquids of biomacromolecular architectures approaching the topic from our own perspective of research. We will highlight the milestones in synthesis, including a recently developed general surfactant complexation method applicable to a large variety of biomacromolecules as well as other synthetic principles granting access to electrostatically complexed proteins and DNA.

These synthetic pathways retain the function and structure of the biomacromolecules even under extreme, nonphysiological conditions at high temperatures in water-free melts challenging the existing paradigm on the role of hydration in structural biology. Under these conditions, the resulting complexes reveal their true potential for previously unthinkable applications. Moreover, these protocols open a pathway toward the assembly of anisotropic architectures, enabling the formation of solvent-free biomacromolecular thermotropic liquid crystals. These ordered biomaterials exhibit vastly different mechanical properties when compared to the individual building blocks. Beyond the preparative aspects, we will shine light on the unique potential applications and technologies resulting from solvent-free biomacromolecular fluids: From charge transport in dehydrated liquids to DNA electrochromism to biocatalysis in the absence of a protein hydration shell. Moreover, solvent-free biological liquids containing viruses can be used as novel storage and process media serving as a formulation technology for the delivery of highly concentrated bioactive compounds. We are confident that this new class of hybrid biomaterials will fuel further studies and applications of biomacromolecules beyond water and other solvents and in a much broader context than just the traditional physiological conditions.