Impeding (99)Tc(IV) mobility in novel waste forms

Role of Charge Density and Surface Area of Tailored Ionic Porous Organic Polymers for Adsorption and Antibacterial Actions

The development of high-performance adsorbents for environmental remediation is a current need, and ionic porous organic polymers (iPOPs), due to their high physicochemical stability, high surface area, added electrostatic interaction, and easy reusability, have already established themselves as a better adsorbent. However, research on the structural design of high-performance iPOP-based adsorbents is still nascent. This study explored the building blocks' role in optimizing the polymers' charge density and surface area to develop better polymeric adsorbents. Among the three synthesized polymers, iPOP-ZN1, owing to its high surface area and high charge density in its active sites, proved to be the best adsorbent for adsorbing inorganic and organic pollutants in an aqueous medium. The polymers were efficient enough to capture and store iodine vapor in the solid state. Further, this study tried to address using iodine-loaded polymers in antibacterial action. Iodine-loaded iPOPs show impressive antibacterial behavior against E. coli, B. subtilis, and H. pylori.

Chalcogen Bonding in Selective Recognition and Liquid-Liquid Extraction of Perrhenate

Efficient recognition and extraction of hazardous anionic pollutants from water medium is of great significance for environmental concerns, representing a challenging area of research in supramolecular chemistry. In this study, we present, for the first time, a comprehensive demonstration of the ability of chalcogen bonding (ChB) to recognize and remove the ReO4 - from 100 % water medium. The anion recognition ability is well elucidated through solution phase NMR and ITC studies, which clearly reveal the selective binding of ReO4 - over other oxo-anions. Moreover, the selenoimidazolium scaffold effectively engages in Se•••O ChB interaction with ReO4 - as confirmed by X-ray crystal structure and XPS analysis. More importantly, the binding of ReO4 - with different prolongations of the σ-holes, along with Se•••Se chalcogen bonding interactions, lead to the formation of a 1D supramolecular assembly. Eventually, ChB receptor Se4Me-Br exhibits ~62 % ReO4 - extraction efficiency through precipitation as the extraction method. Furthermore, in efforts to enhance efficiency, a hydrophobic ChB receptor Se4Do-PF6 has been prepared, achieving an efficiency of up to ~93 % at a very low concentration (~5 ppm) by liquid-liquid extraction.

Post-Modification of a Robust Covalent Organic Framework for Efficient Sequestration of 99 TcO4 - /ReO4. Chemistry 2023;29:e202302168. [PMID: 37534580 DOI: 10.1002/chem.202302168] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Nuclear industry spent fuel reprocessing and some radioactive contamination sites often involve high acidity and salinity environments. Currently developed and reported sorbents in 99 TcO4 - sequestration from the nuclear waste are unstable and show low adsorption efficiency in harsh conditions. To address this issue, we developed a post-synthetic modification strategy by grafting imidazole-based ionic liquids (ILs) onto the backbone of covalent organic framework (COF) via vinyl polymerization. The resultant COF-polyILs sorbent exhibits fast adsorption kinetics (<5 min) and good sorption capacity (388 mg g-1 ) for ReO4 - (a nonradioactive surrogate of 99 TcO4 - ). Outstandingly, COF-polyILs composite shows superior ReO4 - removal even under highly acidic conditions and in the presence of excess competing ions of Hanford low-level radioactive waste stream, benefiting from the stable covalent bonds between the COF and polyILs, mass of imidazole rings, and hydrophobic pores in COF.

Incorporation of Th4+ and Sr2+ into Rhabdophane/Monazite by Wet Chemistry: Structure and Phase Stability

Rhabdophane is an important permeable reactive barrier to enrich radionuclides from groundwater and has been envisaged to host radionuclides in the backend of the nuclear fuel cycle. However, understanding of how An4+ and Sr2+ precipitate into rhabdophane by wet chemistry has not been resolved. In this work, Th4+ and Sr2+ incorporation in the rhabdophane/monazite structure as La1-2xSrxThxPO4·nH2O solid solutions is successfully achieved in the acid solution at 90 °C. Some specific issues such as lattice occupation of Th4+ and Sr2+, precipitation reaction kinetics, and crystal growth affected by starting stoichiometry are discussed in detail, along with investigating the chemical stability of La1-2xSrxThxPO4·nH2O precipitations and associated La1-2xSrxThxPO4 monazite. The results reveal that the excess of Sr2+ appears to be a prevailing factor with a suggested initial Sr: Th ≥ 2 to obtain the stability domain of La1-2xSrxThxPO4·nH2O (x = 0∼ 0.1). A rapid ion removal associated with a nucleation process has been observed within 8 h, and Th4+ can be removed more than 98% after 24 h in 0.01 mol/L solutions. From structural energetics based on density functional theory, the lattice occupation of Th4+ and Sr2+ is energetically favorable in nonhydrated lattice sites of [LaO8], although two-thirds of lattice sites are associated with [LaO8·H2O] hydrated sites. Intriguingly, the crystal transformation from rhabdophane to monazite associated with the transformation from [SrO8] to [SrO9] polyhedra can greatly improve the leaching stability of Sr2+.

Superiority of the Supramolecular Halogen Bond Receptor over Its H-Bond Analogue toward the Efficient Extraction of Perrhenate from Water

A halogen bond-based water-soluble tetrapodal iodoimidazolium receptor, (L-I)(4Br), exhibited a high degree of efficiency (∼96%) in extracting ReO₄^- from 100% aqueous medium within a wide range of concentrations and of pH values along with excellent reusability. The solid-state X-ray diffraction study showed the trapping of ReO₄^- by (L-I)(4Br) via the Re-O····I halogen bonding interaction. XPS studies also suggested the interaction between I and ReO₄^- through polarization of the electron density of I atoms by ReO₄^-. (L-I)(4Br) is found to be capable of retaining its high extraction efficiency in the presence of competing anions such as F^-, Cl^-, I^-, SO₄^2-, H₂PO₄^-, CO₃^2-, NO₃^-, BF₄^-, ClO₄^-, Cr₂O₇^2-, and a mixture of these anions. Interestingly, (L-I)(4Br) was found to be superior in ReO₄^- extraction as compared to its hydrogen-bond donor analogue, (L-H)(4Br), as confirmed by a series of control experiments and theoretical calculations. Our synthesized dipodal and tripodal halogen bond donor receptors and their H-analogues validated the superiority of these classes of supramolecular halogen bond donor receptors over their hydrogen-bond analogues. (L-I)(4Br) also showed superior practical applicability in terms of the removal of ReO₄^- at anion concentrations as low as ∼100 ppm, which was a major shortcoming of (L-H)(4Br).

Fly Ash as a Potential Adsorbent for Removing Radionuclides from Aqueous Solutions in an Adsorption-Membrane Assisted Process Compared to Batch Adsorption

The paper deals with checking the possibility of using fly ash (FA) as a sorbent in the batch adsorption method of removing radionuclides from aqueous solutions. An adsorption-membrane filtration (AMF) hybrid process with a polyether sulfone ultrafiltration membrane with a pore size of 0.22 μm was also tested as an alternative to the commonly used column-mode technology. In the AMF method, metal ions are bound by the water-insoluble species prior to the membrane filtration of the purified water. Thanks to the easy separation of the metal-loaded sorbent, it is possible to improve water purification parameters using compact installations and reduce operating costs. This work evaluated the influence of such parameters on cationic radionuclide removal efficiency (EM): initial pH and composition of the solution, contact time of the phases, and the FA doses. A method for removing radionuclides, ordinarily present in an anionic form (e.g., TcO4-), from water, has also been presented. The results show, that both batch adsorption of radionuclides and adsorption-membrane filtration (AMF) using the FA as an adsorbent can be effectively used for water purification and in the form of a solid directed to long-term storage.

CTAB assisted evaporation-induced self-assembly to construct imidazolium-based hierarchical porous covalent organic polymers for ReO4-/TcO4- removal

Evaporation-induced self-assembly method (EISA) was a facile and reliable method to synthesize porous materials. Herein, we report a kind of hierarchical porous ionic liquid covalent organic polymers (HPnDNH₂) under cetyltrimethylammonium bromide (CTAB) assisted by EISA for ReO₄^-/TcO₄^- removal. Unlike covalent organic frameworks (COFs), which usually needed to be prepared in a closed environment or with a long reaction time, HPnDNH₂ in this study was prepared within 1 h in an open environment. It was worth noting that CTAB not only served as a soft template for forming pore, but also induced ordered structure, which was verified by SEM, TEM, and Gas sorption. Benefit from its hierarchical pore structure, HPnDNH₂ exhibited higher adsorption capacity (690.0 mg g^-1 for HP1DNH₂ and 808.7 mg g^-1 for HP1.5DNH₂) and faster kinetics for ReO₄^-/TcO₄^- than 1DNH₂ (without employing CTAB). Additionally, the material used to remove TcO₄^- from alkaline nuclear waste was seldom reported, because combining features of alkali resistance and high uptake selectivity was not easy to achieve. In this study, in the case of HP1DNH₂, it displayed outstanding adsorption efficiency toward aqueous ReO₄^-/TcO₄^- in 1 mol L^-1 NaOH solution (92%) and simulated Savannah River Site High-level waste (SRS HLW) melter recycle stream (98%), which could be a potentially excellent nuclear waste adsorbing material.

Design and Application of Materials for Sequestration and Immobilization of 99Tc

⁹⁹Technetium (⁹⁹Tc) is a hazardous radionuclide that poses a serious environmental threat. The wide variation and complex chemistries of liquid nuclear waste streams containing ⁹⁹Tc often create unique, site specific challenges when sequestering and immobilizing the waste in a matrix suitable for long-term storage and disposal. Therefore, an effective management plan for ⁹⁹Tc containing liquid radioactive wastes (such as storage (tanks) and decommissioned wastes) will likely require a variety of suitable materials/matrixes capable of adapting to and addressing these challenges. In this review, we discuss and highlight the key developments for effective removal and immobilization of ⁹⁹Tc liquid waste in inorganic waste forms. Specifically, we review the synthesis, characterization, and application of materials for the targeted removal of ⁹⁹Tc from (simulated) waste solutions under various experimental conditions. These materials include (i) layered double hydroxides (LDHs), (ii) metal-organic frameworks (MOFs), (iii) ion-exchange resins (IERs) as well as cationic organic polymers (COPs), (iv) surface modified natural clay materials (SMCMs), and (v) graphene-based materials (GBMs). Second, we discuss some of the major and recent developments toward ⁹⁹Tc immobilization in (i) glass, (ii) cement, and (iii) iron mineral waste forms. Finally, we present future challenges that need to be addressed for the design, synthesis, and selection of suitable matrixes for the efficient sequestration and immobilization of ⁹⁹Tc from targeted wastes. The purpose of this review is to inspire research on the design and application of various suitable materials/matrixes for selective removal of ⁹⁹Tc present globally in different radioactive wastes and its immobilization in stable/durable waste forms.

Recent advances toward structural incorporation for stabilizing heavy metal contaminants: A critical review

Heavy metal pollution has resulted in serious environmental damage and raised significant public health concerns. One potential solution in terminal waste treatment is to structurally incorporate and immobilize heavy metals in some robust frameworks. Yet extant research offers a limited perspective on how metal incorporation behavior and stabilization mechanisms can effectively manage heavy metal-laden waste. This review sets forth detailed research on the feasibility of treatment strategies to incorporate heavy metals into structural frameworks; this paper also compares common methods and advanced characterization techniques for identifying metal stabilization mechanisms. Furthermore, this review analyses the typical hosting structures for heavy metal contaminants and metal incorporation behavior, highlighting the importance of structural features on metal speciation and immobilization efficiency. Lastly, this paper systematically summarizes key factors (i.e., intrinsic properties and external conditions) affecting metal incorporation behavior. Drawing on these impactful findings, the paper discusses future directions in the design of waste forms that efficiently, effectively treat heavy metal contaminants. By examining tailored composition-structure-property relationships in metal immobilization strategies, this review reveals possible solutions for crucial challenges in waste treatment and enhances the development of structural incorporation strategies for heavy metal immobilization in environmental applications.

Ultraselective Extraction Reprocessing of 99TcO4-/ReO4- with a Promising Carbamic Acid Extractant System

With the development of nuclear energy, the reprocessing of ⁹⁹TcO₄^-/ReO₄^- has become a very difficult problem due to environmental issues such as high output, long life, and easy leakage. In this study, three extraction systems containing carbamic acid were introduced into the reprocessing of ⁹⁹TcO₄^-/ReO₄^- for the first time. The results involving one of the three results show that N-[N,N-di(2-ethylhexyl) aminocarbonylmethyl] glycine (D2EHAG) has ultrahigh selectivity for removal to ⁹⁹TcO₄^-/ReO₄^-. When the extreme concentration ratio of SO₄^2- and Cl^- to ReO₄^- of D2EHAG is 10,000:1, the distribution coefficient of ReO₄^- still reaches 12.73 and 2.67, respectively. Additionally, the most hydrophilic NO₃^-, when the extreme concentration ratio of NO₃^- and ReO₄^- is 1000:1, still has a distribution coefficient close to 2.33, which is more than the most reported MOF adsorption materials. Moreover, the reaction kinetics, stripping rate, and reuse rate were studied. After five cycles, the removal rate is still 98.12%, with a decrease of less than 0.7%. The system containing carbamic acid is a potential extraction removal system to remove ⁹⁹TcO₄^-/ReO₄^- from nuclear radioactive wastewater.

Twofold Interpenetrated Cationic Metal-Organic Framework with Hydrophobic Channels for Effectively Trapping Toxic Oxo-Anions

Sequestration of toxic oxo-anions (such as ⁹⁹TcO₄^- and ClO₄^-) from wastewater has received constant attention due to the existing serious threat to public health and the sustainability of the environment. In view of the low energy of hydration of TcO₄^- and ClO₄^-, cationic metal-organic framework (MOF) materials with the hydrophobic microenvironment are preferred in the selection of sorbents. Herein, a twofold interpenetrated cationic MOF (ZJU-X15) with double-helical chains was constructed by tetrakis[4-(pyridin-4-yl)phenyl]ethene (TPPE) and Cd²⁺ for the elimination of ⁹⁹TcO₄^- and ClO₄^-. Profiting from hydrophobic channels, ZJU-X15 could remove most of ReO₄^- (a surrogate for ⁹⁹TcO₄^-) and ClO₄^- in less than 10 and 20 min, respectively. As the result of batch experiments, ZJU-X15 could capture 356 mg of ReO₄^- and 221 mg of ClO₄^- per 1 g of sorbent, showcase decent selectivity, and still maintain high removal efficiency for anions after four recycles. Furthermore, the process of anion-exchange was confirmed by ion chromatography, Fourier-transform infrared spectroscopy, scanning electron microscopy combined with an energy-dispersive X-ray spectrometer, and X-ray photoelectron spectroscopy, indicating that target anions successfully entered into the body of ZJU-X15 through anion exchange.

Highly Selective Adsorption of 99TcO4-/ReO4- by a Novel Polyamide-Functionalized Polyacrylamide Polymer Material

The treatment of radioactive wastewater is one of the major problems in the current research. With the development of nuclear energy, the efficient removal of 99TcO4- in radioactive wastewater has attracted the attention of countries all over the world. In this study, a novel functional polyamide polymer p-(Amide)-PAM was synthesized by the two-step method. The experimental results show that p-(Amide)-PAM has good adsorptive properties for 99TcO4-/ReO4- and has good selectivity in the nitric acid system. The kinetics of the reaction of p-(Amide)-PAM with 99TcO4-/ReO4- was studied. The results show that p-(Amide)-PAM has a fast adsorption rate for 99TcO4-/ReO4-, the saturated adsorption capacity reaches 346.02 mg/g, and the material has good reusability. This new polyamide-functionalized polyacrylamide polymer material has good application prospects in the removal of 99TcO4- from radioactive wastewater.

Two-Fold Interlocking Cationic Metal-Organic Framework Material with Exchangeable Chloride for Perrhenate/Pertechnetate Sorption

Albeit reported substantial sorbents for elimination of TcO₄^-, the issue of secondary contamination caused by released counterions (such as NO₃^-) from the cationic metal-organic framework (MOF) has not come into the sufficient limelight for researchers. Herein, our efforts are dedicated to settle the matter through synthesis of NiCl₂ based on the cationic MOF (ZJU-X4). Less harmful chlorides are used as exchangeable anions for replacing hazardous anions. Notably, ZJU-X4 exhibited fast sorption kinetics, high sorption capacity of 395 mg/g, decent selectivity, and excellent reusability in four recycles. The results of ion chromatography revealed that the released chloride ion was equal to sorption of target ions, and pair distribution functions were employed to analyze the changes in ZJU-X4 after sorption of ReO₄^-, clearly elucidating the anion-exchange mechanism. Furthermore, in the dynamic sorption experiments, ReO₄^- could be facilely and effectively removed and recovered, showing the value of practical applications. This work indicated that cationic MOF-based metal chloride salts would be a better choice for anionic sorbents.

Pyridinium salt-based covalent organic framework with well-defined nanochannels for efficient and selective capture of aqueous 99TcO4. Sci Bull (Beijing) 2022;67:924-932. [PMID: 36546027 DOI: 10.1016/j.scib.2022.02.012]

Ionic covalent organic framework (COF) materials with high specific surface areas and well-defined pore structures are desired for many applications yet seldom reported. Herein, we report a cationic pyridinium salt-based COF (PS-COF-1) with a Brunauer-Emmett-Teller (BET) surface area of 2703 m2 g-1, state-of-the-art for an ionic COF. Aided by its ordered pore structure, chemical stability, and radiation resistance, PS-COF-1 showed exceptional adsorption properties toward aqueous ReO4- (1262 mg g-1) and 99TcO4-. Its adsorption performance surpassed its corresponding amorphous analogue. Importantly, PS-COF-1 exhibited fast adsorption kinetics, high adsorption capacities, and selectivity for 99TcO4- and ReO4- at high ionic strengths, leading to the successful removal of 99TcO4- under conditions relevant to low-activity waste streams at US legacy Hanford nuclear sites. In addition, PS-COF-1 can rapidly decontaminate ReO4-/99TcO4- polluted potable water (∼10 ppb) to drinking water level (0 ppb, part per billion) within 10 min. Density functional theory (DFT) calculations revealed PS-COF-1 has a strong affinity for ReO4- and 99TcO4-, thereby favoring adsorption of these low charge density anions over other common anions (e.g., Cl-, NO3-, SO42-, CO32-). Our work demonstrates a novel cationic COF sorbent for selective radionuclide capture and legacy nuclear waste management.

Progress of energy-related radiochemistry and radionuclide production in the Republic of Korea

The field of radiochemistry in the Republic of Korea has expanded greatly over the last three decades to meet the rapid growth of technological demands in various areas such as nuclear energy and nuclear technologies for human health and environmental protection. Major research activities, which were initially centered at the Korea Atomic Energy Research Institute (KAERI), have gradually spread to major universities and the commercial sector. In this review, progress and recent research trends in nuclear and radiochemistry in Korea are summarized. The main research outcomes achieved by KAERI scientists are highlighted, with emphasis on basic actinide chemistry in nuclear fuel cycles, the radioanalytical chemistry of various radionuclides from radioactive waste and the environment, and medical radionuclide production. In addition, recent efforts to promote radiochemical education and future perspectives are briefly outlined.

Metallic technetium sequestration in nickel core/shell microstructure during Fe(OH)2 transformation with Ni doping

This study investigates the impacts of Ni doping on technetium-99 (Tc) sequestration in aqueous solutions through transformation of Fe(OH)₂(s) to iron spinel (magnetite) under alkaline conditions. Extensive solid characterization was performed for the mineral phases produced, as well as the Tc/Ni speciation and distribution within these phases. X-ray diffraction results show that iron spinel was the dominant mineral product without detectable Ni incorporation. The doped Ni ions mainly precipitated as fine Fe/Ni oxide/hydroxide particles, including strongly reduced nanometer-sized spheroidal Ni-rich and metallic Ni phases. High-resolution analytical scanning transmission electron microscopy using energy dispersive X-ray spectroscopy and electron energy loss spectroscopy on the produced solid samples (focused ion beam-prepared specimens) revealed three Tc distribution domains dominated by nanocrystals and, especially, a Tc-rich metallic phase. Instances of metallic Tc were specifically found in spheroidal, Ni-rich and metallic nanoparticles exhibiting a core/shell microstructure that suggests strong reduction and sequential precipitation of Ni-Tc-Ni. Mass balance analysis showed nearly 100% Tc removal from the 4.8 × 10^-4 M Tc solutions. The finding of the metallic Tc encapsulation indicates that Tc sequestration through Ni-doped Fe(OH)₂(s)-to-iron spinel transformation process likely provides an alternative treatment pathway for Tc removal and could be combined into further waste treatment approaches.

Immersion grinding and in-situ polymerization synthesis of poly(ionic liquid)s incorporation into MOF composites as radioactive TcO4- scavenger

Imidazolium-based ionic liquids (ILs) are a promising candidate for efficient separation of radioactive pertechnetate (TcO₄^-) from nuclear waste. However, their effective fixation, availability of active sites and slow adsorption kinetics remain challenges. Here, we incorporated the bisimidazolium-based ILs into porous metal-organic frameworks (MOFs) via a combination of immersion grinding and in-situ polymerization. 3,3'-divinyl-1,1'(1,4-butanediyl) diimidazolium dichloride is tightly bound inside and outside the porous MOFs matrix by uniform immersion grinding, which facilitates the exposure of more adsorption sites and provides channels for the anions to travel through quickly. Solvent-free polymerization reduces environmental pollution and energy consumption. Notably, the composite P[C₄(VIM)₂]Cl₂@MIL-101 possesses an admirable removal efficiency (673 mg g^-1) compared with the pristine poly(ionic liquid)s (215 mg g^-1). Meanwhile, it exhibits fast sorption kinetics (92% in 2 min), good β and γ radiation-resistance, excellent regeneration and eminent removal efficiency in high alkaline conditions (83%). These superior traits endow that P[C₄(VIM)₂]Cl₂@MIL-101 effectively separated TcO₄^- from simulated Hanford Low-activity Waste (LAW) Melter off-gas scrubber solution tested in this work. DFT density functional theory confirms that the strong electrostatic attraction and minimum Gibbs free energy (-6.2 kcal mol^-1) achieve high selective adsorption for TcO₄^-. P[C₄(VIM)₂]Cl₂@MIL-101 demonstrates the considerable potential to remove TcO₄^- from radioactive contaminants.

Amphilic Water-Lean Carbon Capture Solvent Wetting Behavior through Decomposition by Stainless-Steel Interfaces

A combined experimental and theoretical study has been carried out on the wetting and reactivity of water-lean carbon capture solvents on the surface of common column packing materials. Paradoxically, these solvents are found to be equally able to wet hydrophobic and hydrophilic surfaces. The solvents are amphiphilic and can adapt to any interfacial environment, owing to their inherent heterogeneous (nonionic/ionic) molecular structure. Ab initio molecular dynamics indicates that these structures enable the formation of a strong adlayer on the surface of hydrophilic surfaces like oxidized steel which promotes solvent decomposition akin to hydrolysis from surface oxides and hydroxides. This decomposition passivates the surface, making it effectively hydrophobic, and the decomposed solvent promotes leaching of the iron into the bulk fluid. This study links the wetting behavior to the observed corrosion of the steels by decomposition of solvent at steel interfaces. The overall affect is strongly dependent on the chemical composition of the solvent in that amines are stable, whereas imines and alcohols are not. Moreover, plastic packing shows little to no solvent degradation, but an equal degree of wetting.

Evaluation of an Ionic Porous Organic Polymer for Water Remediation

The targeted synthesis of a novel ionic porous organic polymer (iPOP) was reported. The compound (denoted as QUST-iPOP-1) was built up through a quaternization reaction of tris(4-imidazolylphenyl)amine and cyanuric chloride, and then benzyl bromide was added to complete the quaternization of the total imidazolyl units. It featured a special exchangeable Cl^-/Br^--rich structure with high permanent porosity and wide pore size distribution, enabling it to rapidly and effectively remove environmentally toxic oxo-anions including Cr₂O₇^2-, MnO₄^-, and ReO₄^- and anionic organic dyes with different sizes including methyl blue, Congo red, and methyl orange from water. Notably, QUST-iPOP-1 showed ultra-high capacity values for radioactive TcO₄^- surrogate anions (MnO₄^- and ReO₄^-), Cr₂O₇^2-, methyl blue, and Congo red, and these were comparable to some reported compounds of exhaustive research. Furthermore, the relative removal rate was high even when other concurrent anions existed.

Ultrastable Zirconium-Based Cationic Metal-Organic Frameworks for Perrhenate Removal from Wastewater

The effective removal of radioactive ⁹⁹TcO₄^- anion from nuclear wastewater remains a very difficult unsolved problem. Functional adsorbent materials with high stability, anion-exchange capacity, excellent selectivity, and recyclability are much needed to solve this problem. In this work, we designed two stable cationic metal-organic frameworks (MOFs)-Zr-tcbp-Me and Zr-tcpp-Me-for possible use as adsorbent materials to remove ⁹⁹TcO₄^-. Both compounds were synthesized by solvothermal reactions of the tetracarboxylate ligand with zirconium salt, followed by postsynthetic modification (N-methylation). The crystallinity of both zirconium-based MOFs can be well retained under harsh conditions, and they exhibit high adsorption capacity and selectivity toward ReO₄^- anion, a nonradioactive analogue of ⁹⁹TcO₄^-. Zr-tcbp-Me and Zr-tcpp-Me demonstrate the highest framework stability toward acidity among all previously reported cationic MOFs that have been tested for perrhenate removal from wastewater.

A H-Bonding and Electrostatic Interaction Combined Strategy for TcO4- Separation by a Nitrotriacetate-Derived Amine-Amide Extractant

Effective and selective separation of technetium from acidic nuclear liquid waste is highly desirable for partitioning and transmutation but is of significant challenge. Highly efficient extraction of pertechnetate can be achieved by taking H-bonding and electrostatic interaction combined strategy. Base on this strategy, an amine-amide ligand NTAamide(n-Oct) was employed to extract TcO₄^- in HNO₃ solution. Using n-dodecane as a diluent, NTAamide(n-Oct) demonstrated excellent extractability and good selectivity toward TcO₄^- with a rapid extraction equilibrium that could be reached in less than 1 min. Its maximal loading capacity for TcO₄^- was almost 100 times as much as that of traditional amine extractant Aliquat-336 nitrate. Meanwhile, TcO₄^- could be efficiently stripped from the loaded organic phase by (NH₄)₂CO₃ solution. Slope analysis indicated the formation of a 1:1 complex of NTAamide(n-Oct) with TcO₄^-. The extraction conformed to the anion exchange extraction model, as confirmed by analyses of single-crystal X-ray diffraction, ¹H NMR titration, FTIR, and ESI-MS.

TcO2 oxidative dissolution by birnessite under anaerobic conditions: a solid-solid redox reaction impacting the environmental mobility of Tc-99

Remediation efforts for the abatement of Tc-99 contamination in the environment have traditionally focused on the reduction of soluble pertechnetate (Tc(vii)O4-) to insoluble, and less mobile, technetium(iv) oxide (TcO2). Effectiveness of the reductive immobilization of Tc-99 depends on the susceptibility of TcO2 to oxidation to TcO4-in situ, as it is subject to dissolution by oxidizing agents, such as oxygen. Manganese minerals can be a liability for the long-term in situ immobilization of Tc-99, even in suboxic and anoxic systems due to their strong oxidizing capacity. This study presents for the first time the oxidative dissolution of TcO2 to pertechnetate by birnessite under anaerobic conditions. Oxidative dissolution of TcO2 was studied as a function of pH and birnessite:TcO2 ratios and in the presence of Ca2+ and Mn2+. As low as 5 mg of birnessite dissolved ∼65% of the original TcO2 in the suspensions and subsequently released TcO4- in the aqueous phase at both pH 6.5 and 8 in the absence of oxygen. On the other hand, the ability of birnessite to sequester calcium and manganese on its surface at pH 6.5 through sorption was shown to inhibit the oxidative capacity of birnessite. Maximum TcO4- release in the aqueous phase by Ca- and Mn-loaded birnessite was ∼50% less compared to pure birnessite, indicating that divalent cations sorb on active centers responsible for birnessite's oxidative capacity and potentially passivate the mineral. In summary, birnessite exerts strong geochemical controls over the mobility of Tc-99 in anoxic systems by oxidatively mobilizing the otherwise insoluble Tc(iv) to Tc(vii) and their presence in natural systems needs to be taken into account when long-term remediation strategies are being designed.

99TcO4- Separation through Selective Crystallization Assisted by Polydentate Benzene-Aminoguanidinium Ligands

⁹⁹Tc is one of the most abundant radiotoxic isotopes in used nuclear fuel with a high fission yield and a long half-life. Effective removal of pertechnetate (TcO₄^-) from an aqueous solution is important for nuclear waste separation and remediation. Herein, we report a series of facilely obtained benzene-linked guanidiniums that could precipitate TcO₄^- and its nonradioactive surrogate ReO₄^- from a high-concentration acidic solution through self-assembly crystallization. The resulting perrhenate and pertechnetate solids exhibit exceptionally low aqueous solubility. The benzene-linked guanidiniums hold one of the highest TcO₄^- removal capacities (1279 mg g^-1) among previously reported materials and possess a removal percentage of 59% for ReO₄^- in the presence of Cl^- over 50 times. The crystallization mechanism was clearly illustrated by the single-crystal structures and density functional theory calculations, indicating that TcO₄^- is captured through a charge-assisted hydrogen bonding interaction and stabilized by π-π stacking layers. In addition, the removal process is easily recycled and no toxic organic reagents are introduced. This work provides a green approach to preliminarily separate TcO₄^- from high-level nuclear wastes.

Radiation synthesis of ionic liquid-functionalized silica-based adsorbents: a preliminary investigation on its application for removal of ReO4- as an analog for TcO4. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2021;28:17752-17762. [PMID: 33400123 DOI: 10.1007/s11356-020-12078-z]

The decontamination of radioactive TcO₄^- from nuclear wastes is becoming increasingly crucial for spent nuclear fuel reprocessing and environmental remediation. In this work, a series of ionic liquid-immobilized silica-based adsorbents (SVIL-Cn, n = 1, 4, 8) were newly synthesized using the radiation-induced grafting of 4-vinylbenzyl chloride onto silanized silica and subsequent functionalization with 1-methylimidazole, 1-butylimidazole, or 1-octylimidazole. The synthesis conditions such as the solvent, absorbed dose, and monomer concentration were investigated in detail, and the resulting adsorbents were characterized by elemental analysis, FT-IR, SEM, and TGA. In batch experiments, the adsorbents exhibited a high ReO₄^- (a nonradioactive surrogate of TcO₄^-) removal efficiency over a wide pH range (3 ~ 8), and SVIL-C1 showed a maximum adsorption capacity of 70.62 mg g^-1 towards ReO₄^-. In addition, their adsorption performance barely changed after 800 kGy radiation. The column experiments for treating simulated radioactive wastewater showed that the SVIL-Cn adsorbents could selectively separate TcO₄^-/ReO₄^- from a variety of fission products, and they could be recycled four times with negligible capacity loss. Lastly, XPS and FT-IR analysis confirmed that the adsorption proceeded via an ion-exchange mechanism. The results showed that these adsorbents are suitable for the efficient removal of TcO₄^-/ReO₄^- from radioactive wastewater with complex compositions.

Unveiling the Uncommon Fluorescent Recognition Mechanism towards Pertechnetate Using a Cationic Metal-Organic Framework Bearing N-Heterocyclic AIE Molecules

As one of most problematic radionuclides, technetium-99, mainly in the form of anionic pertechnetate (TcO₄ ^- ), exhibits high environmental mobility, long half-life, and radioactive hazard. Due to low charge density and high hydrophobicity for this tetrahedral anion, it is extremely difficult to recognize it in water. Seeking efficient and selective recognition method for TcO₄ ^- is still a big challenge. Herein, a new water-stable cationic metal-organic framework (ZJU-X8) was reported, bearing tetraphenylethylene pyrimidine-based aggregation-induced emission (AIE) ligands and attainable silver sites for TcO₄ ^- detection. ZJU-X8 underwent an obvious spectroscopic change from brilliant blue to flavovirens and exhibited splendid selectivity towards TcO₄ ^- . This uncommon fluorescent recognition mechanism was well elucidated by batch sorption experiments and DFT calculations. It was found that only TcO₄ ^- could enter into the body of ZJU-X8 through anion exchange whereas other competing anions were excluded outside. Subsequently, after interaction between TcO₄ ^- and silver ions, the electron polarizations from pyrimidine rings to Ag⁺ cations significantly lowered the energy level of the π* orbital and thus reduced the π-π* energy gap, resulting in a red-shift in the fluorescent spectra.

Radiation synthesis of imidazolium-based ionic liquid modified silica adsorbents for ReO4− adsorption

A series of ionic liquid functionalized silica-based adsorbents were synthesized and used to remove ReO₄⁻ from simulated radioactive wastewater.

Optimizing Strategy for Enhancing the Stability and 99TcO4 - Sequestration of Poly(ionic liquids)@MOFs Composites

Metal-organic frameworks (MOFs) are a class of promising sorbents for effective sequestration of radioactive ⁹⁹TcO₄ ^- anions. However, their poor stability and slow sorption kinetics in the industrial condition pose a great challenge. Herein, we demonstrate an optimizing strategy via in situ polymerization of ionic liquids (ILs) encapsulated in the pores of MOFs, forming polyILs@MOFs composites with greatly enhanced TcO₄ ^- sequestration compared with the pristine MOFs. Notably, the cross-linked polymerization of ILs facilitates the formation of both the inside ionic filler as the active sites and outside coating as the protective layers of MOFs, which is significantly beneficial to obtain the optimized sorption materials of exceptional stability under extreme conditions (e.g., in 6 M HNO₃). The final optimized composite shows fast sorption kinetics (<30 s), good regeneration (>30 cycles), and superior uptake performance for TcO₄ ^- in highly acidic conditions and simulated recycle stream. This strategy opens up a new opportunity to construct the highly stable MOF-based composites and extend their applicability in different fields.

Spontaneous redox continuum reveals sequestered technetium clusters and retarded mineral transformation of iron

The sequestration of metal ions into the crystal structure of minerals is common in nature. To date, the incorporation of technetium(IV) into iron minerals has been studied predominantly for systems under carefully controlled anaerobic conditions. Mechanisms of the transformation of iron phases leading to incorporation of technetium(IV) under aerobic conditions remain poorly understood. Here we investigate granular metallic iron for reductive sequestration of technetium(VII) at elevated concentrations under ambient conditions. We report the retarded transformation of ferrihydrite to magnetite in the presence of technetium. We observe that quantitative reduction of pertechnetate with a fraction of technetium(IV) structurally incorporated into non-stoichiometric magnetite benefits from concomitant zero valent iron oxidative transformation. An in-depth profile of iron oxide reveals clusters of the incorporated technetium(IV), which account for 32% of the total retained technetium estimated via X-ray absorption and X-ray photoelectron spectroscopies. This corresponds to 1.86 wt.% technetium in magnetite, providing the experimental evidence to theoretical postulations on thermodynamically stable technetium(IV) being incorporated into magnetite under spontaneous aerobic redox conditions.

Active Anion Delivery by Self-Propelled Microswimmers

Self-propelled micro- and nanomachines are at the forefront of materials research, branching into applications in biomedical science and environmental remediation. Cationic frameworks enabling the collection and delivery of anionic species (A^-) are highly required, due to the large variety of life-threatening pollutants, such as radioactive technetium and carcinogenic chromium, and medicines, such as dexamethasone derivatives with negative charges. However, such autonomous moving carriers for active transport of the anions have been barely discussed. A polymeric viologen (PV⁺⁺)-consisting of electroactive bicationic subunits-is utilized in a tubular autonomous microswimmer to selectively deliver A^- of different sizes and charge densities. The cargo loading is based on a facile anion exchange mechanism. The packed crystal structure of PV⁺⁺ allows removal of an exceptionally high quantity of anions per one microswimmer (2.55 × 10^-13 mol anions per microswimmer), a critical factor often neglected regarding the real-world application of microswimmers. Notably, there was virtually no leakage of anions during the delivery process or upon keeping the loaded microswimmers under ambient conditions for at least 4 months. Multiple release mechanisms, compatible with different environments, including electrochemical, photochemical, and a metathesis reaction, with high efficiencies up to 98% are introduced. Such functional autonomous micromachines provide great promise for the next generation of functional materials for biomedical and environmental applications.

New Insights into 99Tc(VII) Removal by Pyrite: A Spectroscopic Approach

⁹⁹Tc(VII) uptake by synthetic pure pyrite at 21 °C was studied in a wide pH range from 3.50 to 10.50 using batch experiments combined with scanning electron microscopy, X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS), and Raman microscopy. We found that pyrite removes Tc quantitatively from solution (log K_d = 5.0 ± 0.1) within 1 day at pH ≥ 5.50 ± 0.08. At pH < 5.50 ± 0.08, the uptake process is slower, leading to 98% Tc removal (log K_d = 4.5 ± 0.1) after 35 days. The slower Tc uptake was explained by higher pyrite solubility under acidic conditions. After 2 months in contact with oxygen at pH 6.00 ± 0.07 and 10.00 ± 0.04, Tc was neither reoxidized nor redissolved. XAS showed that the uptake mechanism involves the reduction from Tc(VII) to Tc(IV) and subsequent inner-sphere complexation of Tc(IV)-Tc(IV) dimers onto a Fe oxide like hematite at pH 6.00 ± 0.07, and Tc(IV) incorporation into magnetite via Fe(III) substitution at pH 10.00 ± 0.04. Calculations of Fe speciation under the experimental conditions predict the formation of hematite at pH < 7.50 and magnetite at pH > 7.50, explaining the formation of the two different Tc species depending on the pH. XPS spectra showed the formation of TcS_x at pH 10.00 ± 0.04, being a small fraction of a surface complex, potentially a transient phase in the total redox process.

Guest Edited Collection: Radioisotopes and radiochemistry in health science

Radioisotopes can be produced artificially from stable nuclei through the interaction with particles or highly energetic photons. In combination with modern detection and counting techniques, radioisotopes and radiochemical methods uniquely contribute to the health sciences. This Collection showcases salient aspects of medical radioisotope science ranging from the production, recovery and purification of radioisotopes to the methods used to attach them to biomolecules. The Collection also presents studies that highlight the importance of radiochemistry in the assessment of environmental radioactivity.

Evaluation of an Imidazolium-Based Porous Organic Polymer as Radioactive Waste Scavenger

⁹⁹TcO₄^- is highly radioactive and hazardous to both the environment and public health, meanwhile, it is quite challenging to have it efficiently removed. Herein an imidazolium-based cationic porous polymer (ImPOP-1) is evaluated for removal of TcO₄^-, with nonradioactive ReO₄^- as the surrogate for experimental operation. It is demonstrated that ImPOP-1 is a rare example that can integrate high adsorption capacity (610 mg g^-1), fast kinetics (93.3% in 30 s), and high selectivity (72.9% in 1000 times excess of SO₄^2- ions) in one material. The distribution coefficient K_d is among the top up to 3.2 × 10⁵ mL g^-1. ImPOP-1 also displays high adsorption performance over a wide range of pH values, and removal efficiency up to 64.3% in a highly alkaline solution (3 M NaOH). Recyclability experiments demonstrate that ImPOP-1 can be reused at least four times. The ImPOP-1 also retains a consistent adsorption capacity up to 609 ± 6.1 mg g^-1 between three different batches of samples. In addition, a real-scenario experiment shows that ImPOP-1 can remove 97.4% of ReO₄^- in a simulated Hanford LAW stream.

Selective and efficient removal of perrhenate by an imidazolium based hexapodal receptor in water medium

This work reports a new cationic imidazolium based hexapodal receptor, [L.6Br], for selective and efficient removal of perrhenate (ReO₄⁻) as [L.6ReO4] from 100% aqueous medium via extraction through precipitation.

The fate of rhenium in polyaminocarboxy solution: Hourglass crystal and its speciation study

This paper studied the fate of Re in the presence of polyaminocarboxy ligand (DTPA, EDTA and NTA) under reducing condition. When SnCl₂ as reducing agent, the results indicated the low valent Re was formed. And batch experiments studied the effect of pH and different ligands on the formation of low valent Re complex, the acid condition was favoured for the formation of low valent Re complex, and the order of complexing toward the low valent Re was the following: DTPA > EDTA > NTA. In the condition of pH = 1, DTPA as ligand, the hourglass crystal was obtained. Using ESI-MS, solid-state UV-Vis-NIR spectra, EXAFS, DFT calculation et al, the darkened patch of the hourglass crystal was demonstrated to be Re, and its speciation was dimeric Re₂(μ-O)₂DTPA.

Cationic Covalent Organic Nanosheets for Rapid and Selective Capture of Perrhenate: An Analogue of Radioactive Pertechnetate from Aqueous Solution

Capture of radioactive TcO₄^- from nuclear wastes is extremely desirable for waste disposal and environmental restoration. Here, we report the synthesis of hydrolytically stable cationic covalent organic nanosheets (iCON) for efficient uptake of ReO₄^-, a nonradioactive surrogate of TcO₄^-. The iCON combines cationic guanidine-based knots with hydroxyl anchored neutral edge units and chloride ions loosely bonded in the pores, rendering extremely fast exchange kinetics toward ReO₄^- with high uptake capacity of 437 mg g^-1 and prominent distribution coefficient of 5.0 × 10⁵. The removal efficiency remains stable over a pH range of 3-12 and allows selective capture of ReO₄^- in the presence of excessive competing anions such as NO₃^-, CO₃^2-, PO₄^3- and SO₄^2- with good removal efficiency for ReO₄^- in a simulated Hanford LAW Melter Recycle Stream. Anion exchange between the ReO₄^- in solution and the chloride ion in iCON plays dominant role in the adsorption of ReO₄^-. The iCON shows promise for effective removal of radioactive ⁹⁹Tc from nuclear waste.

Optimizing radionuclide sequestration in anion nanotraps with record pertechnetate sorption

The elimination of specific contaminants from competitors poses a significant challenge. Rather than relying on a single direct interaction, the cooperation of multiple functionalities is an emerging strategy for adsorbents design to achieve the required affinity. Here, we describe that the interaction with the target species can be altered by modifying the local environment of the direct contact site, as demonstrated by manipulating the affinity of pyridinium-based anion nanotraps toward pertechnetate. Systematic control of the substituent effect allows the resulting anion nanotraps to combine multiple features, overcoming the long-term challenge of TcO₄^- segregation under extreme conditions of super acidity and basicity, strong irradiation field, and high ionic strength. The top material exhibits the highest sorption capacity together with record-high extraction efficiencies after a single treatment from conditions relevant to the used nuclear fuel (Hanford tank wastes, 95%) and legacy nuclear wastes (Savannah River Sites, 80%) among materials reported thus far.