Heme biomolecule as redox mediator and oxygen shuttle for efficient charging of lithium-oxygen batteries

Synergistic increase in coproporphyrin III biosynthesis by mitochondrial compartmentalization in engineered Saccharomyces cerevisiae

Coproporphyrin III (CP III), a natural porphyrin derivative, has extensive applications in the biomedical and material industries. S. cerevisiae has previously been engineered to highly accumulate the CP III precursor 5-aminolevulinic acid (ALA) through the C4 pathway. In this study, a combination of cytoplasmic metabolic engineering and mitochondrial compartmentalization was used to enhance CP III production in S. cerevisiae. By integrating pathway genes into the chromosome, the CP III titer gradually increased to 32.5 ± 0.5 mg/L in shake flask cultivation. Nevertheless, increasing the copy number of pathway genes did not consistently enhance CP III synthesis. Hence, the partial synthesis pathway was compartmentalized in mitochondria to evaluate its effectiveness in increasing CP III production. Subsequently, by superimposing the mitochondrial compartmentalization strategy on cytoplasmic metabolic engineered strains, the CP III titer was increased to 64.3 ± 1.9 mg/L. Furthermore, augmenting antioxidant pathway genes to reduce reactive oxygen species (ROS) levels effectively improved the growth of engineered strains, resulting in a further increase in the CP III titer to 82.9 ± 1.4 mg/L. Fed-batch fermentations in a 5 L bioreactor achieved a titer of 402.8 ± 9.3 mg/L for CP III. This study provides a new perspective on engineered yeast for the microbial production of porphyrins.

Constructing an Interlaced Catalytic Surface via Fluorine-Doped Bimetallic Oxides for Oxygen Electrode Processes in Li-O2 Batteries

Lithium-oxygen (Li-O2) batteries, renowned for their high theoretical energy density, have garnered significant interest as prime candidates for future electric device development. However, their actual capacity is often unsatisfactory due to the passivation of active sites by solid-phase discharge products. Optimizing the growth and storage of these products is a crucial step in advancing Li-O2 batteries. Here, a fluorine-doped bimetallic cobalt-nickel oxide (CoNiO2- xFx/CC) with an interlaced catalytic surface (ICS) and a corncob-like structure is proposed as an oxygen electrode. Unlike conventional oxide electrodes with a "single adsorption catalytic mechanism," the ICS of CoNiO2- xFx/CC offers a "competitive adsorption catalytic mechanism," where oxygen sites facilitate oxygen conversion while fluorine sites contribute to the growth of Li2O2. This results in a change in Li2O2 morphology from a surface film to toroidal particles, effectively preventing the burial of active sites. Additionally, the unique open architecture aids in the capture and release of oxygen and the formation of well-contacted Li2O2/electrode interfaces, which benefits the complete decomposition of Li2O2 products. Consequently, the Li-O2 battery with a CoNiO2- xFx/CC cathode demonstrates a high specific capacity of up to 30923 mAh g-1 and a lifespan exceeding 580 cycles, surpassing most reported metal oxide-based cathodes.

Polyoxometalate Supported Single Transition Metal Atom as a Redox Mediator for Li-O2 Batteries

Keggin-type polyoxometalate (POM) supported single transition metal (TM) atom (TM1/POM) as an efficient soluble redox mediator for Li-O2 batteries is comprehensively investigated by first-principles calculations. Among the pristine POM and four kinds of TM1/POM (TM = Fe, Co, Ni, and Pt), Co1/POM not only maintains good structural and thermodynamic stability in oxidized and reduced states but also exhibits promising electro(chemical) catalytic performance for both oxygen reduction reaction and oxygen evolution reaction (OER) in Li-O2 batteries with the lowest Gibbs free energy barriers. Further investigations demonstrate that the moderate binding strength of Li2-xO2 (x = 0, 1, and 2) intermediates on Co1/POM guarantees favorable Li2O2 formation and decomposition. Electronic structure analyses indicate that the introduced Co single atom as an electron transfer bridge can not only efficiently improve the electronic conductivity of POM but also regulate the bonding/antibonding states around the Fermi level of [Co1/POM-Li2O2]ox. The solvent effect on the OER catalytic performance and the electronic properties of [Co1/POM-Li2O2]ox with and without dimethyl sulfoxide solvent are also investigated.

A biospecies-derived genomic DNA hybrid gel electrolyte for electrochemical energy storage

Intrinsic impediments, namely weak mechanical strength, low ionic conductivity, low electrochemical performance, and stability have largely inhibited beyond practical applications of hydrogels in electronic devices and remains as a significant challenge in the scientific world. Here, we report a biospecies-derived genomic DNA hybrid gel electrolyte with many synergistic effects, including robust mechanical properties (mechanical strength and elongation of 6.98 MPa and 997.42%, respectively) and ion migration channels, which consequently demonstrated high ionic conductivity (73.27 mS/cm) and superior electrochemical stability (1.64 V). Notably, when applied to a supercapacitor the hybrid gel-based devices exhibit a specific capacitance of 425 F/g. Furthermore, it maintained rapid charging/discharging with a capacitance retention rate of 93.8% after ∼200,000 cycles while exhibiting a maximum energy density of 35.07 Wh/kg and a maximum power density of 193.9 kW/kg. This represents the best value among the current supercapacitors and can be immediately applied to minicars, solar cells, and LED lightning. The widespread use of DNA gel electrolytes will revolutionize human efforts to industrialize high-performance green energy.

Bioproduction of porphyrins, phycobilins, and their proteins using microbial cell factories: engineering, metabolic regulations, challenges, and perspectives

Porphyrins, phycobilins, and their proteins have abundant π-electrons and strongly absorb visible light, some of which bind a metal ion in the center. Because of the structural and optical properties, they not only play critical roles as an essential component in natural systems but also have attracted much attention as a high value specialty chemical in various fields, including renewable energy, cosmetics, medicines, and foods. However, their commercial application seems to be still limited because the market price of porphyrins and phycobilins is generally expensive to apply them easily. Furthermore, their petroleum-based chemical synthesis is energy-intensive and emits a pollutant. Recently, to replace petroleum-based production, many studies on the bioproduction of metalloporphyrins, including Zn-porphyrin, Co-porphyrin, and heme, porphyrin derivatives including chlorophyll, biliverdin, and phycobilins, and their proteins including hemoproteins, phycobiliproteins, and phytochromes from renewable carbon sources using microbial cell factories have been reported. This review outlines recent advances in the bioproduction of porphyrins, phycobilins, and their proteins using microbial cell factories developed by various microbial biotechnology techniques, provides well-organized information on metabolic regulations of the porphyrin metabolism, and then critically discusses challenges and future perspectives. Through these, it is expected to be able to achieve possible solutions and insights and to develop an outstanding platform to be applied to the industry in future research.

Aprotic Lithium-Oxygen Batteries Based on Nonsolid Discharge Products

Aprotic lithium-oxygen (Li-O2) batteries are considered to be a promising alternative option to lithium-ion batteries for high gravimetric energy storage devices. However, the sluggish electrochemical kinetics, the passivation, and the structural damage to the cathode caused by the solid discharge products have greatly hindered the practical application of Li-O2 batteries. Herein, the nonsolid-state discharge products of the off-stoichiometric Li1-xO2 in the electrolyte solutions are achieved by iridium (Ir) single-atom-based porous organic polymers (termed as Ir/AP-POP) as a homogeneous, soluble electrocatalyst for Li-O2 batteries. In particular, the numerous atomic active sites act as the main nucleation sites of O2-related discharge reactions, which are favorable to interacting with O2-/LiO2 intermediates in the electrolyte solutions, owing to the highly similar lattice-matching effect between the in situ-formed Ir3Li and LiO2, achieving a nonsolid LiO2 as the final discharge product in the electrolyte solutions for Li-O2 batteries. Consequently, the Li-O2 battery with a soluble Ir/AP-POP electrocatalyst exhibits an ultrahigh discharge capacity of 12.8 mAh, an ultralow overpotential of 0.03 V, and a long cyclic life of 700 h with the carbon cloth cathode. The manipulation of nonsolid discharge products in aprotic Li-O2 batteries breaks the traditional growth mode of Li2O2, bringing Li-O2 batteries closer to being a viable technology.

High-sensitivity hemoglobin detection based on polarization-differential spectrophotometry

Hemoglobin content is recognized as a momentous and fundamental physiological indicator, especially the precise detection of trace hemoglobin is of great significance for early diagnosis and prevention of tumors, cancer, organic injury, etc. Therefore, high-sensitivity hemoglobin detection is imperative. However, effective detection methods and reliable detection systems are still lacking and remain enormous challenges. Herein, we present a synthetical strategy to break through the existing bottleneck based on polarization-differential spectrophotometry and high-performance single-frequency green fiber laser. Importantly, this framework not only has precisely extracted the two-dimensional information of intensity and polarization during the interaction between laser and hemoglobin, but also has taken advantage of the high monochromaticity and fine directivity in the optimized laser source to reduce the undesirable scattered disturbance. Thus, the hemoglobin detection sensitivity of 7.2 × 10-5 g/L has advanced a hundredfold compared with conventional spectrophotometry, and the responsive dynamic range is close to six orders of magnitude. Results indicate that our technology can realize high-sensitivity detection of trace hemoglobin content, holding promising applications for precision medicine and early diagnosis as an optical direct and fast detection method.

An Organic Redox Mediator with a Defense-Donor for Lithium Anode in Lithium-Oxygen Batteries

Lithium-oxygen batteries (LOBs) suffer from large charge overpotential and unstable Li metal interface, which can be attributed to the inefficient charge transport at the insulating Li₂ O₂ /cathode interface and the severe oxygen corrosion issue on the Li anode surface. The use of soluble redox mediators (RMs) can effectively enhance the charge transport between Li₂ O₂ and cathode, thus greatly reducing the charge overpotential. However, oxidized RMs will also shuttle to the anode side and react with the Li metal, which not only results in the loss of both the RMs and the electrical energy efficiency but also exacerbates the Li anode corrosion. Herein, an organic compound-acetylthiocholine iodide (ATCI), in which a big cation group is contained, is proposed as a defense-donor RM for lithium anode in LOBs to simultaneously address the above issues. During charge, it can accelerate the oxidation kinetics of Li₂ O₂ via its iodide anion redox couple (I^- /I₃ ^- ). Meanwhile, its cation segment (ATC⁺ ) can move to the anode surface via electric attraction and in situ forms a protective interfacial layer, which prevents the Li anode from the attack of oxidized RM and oxygen species. Consequently, the ATCI-containing LOBs can achieve both a low charge potential (≈3.49 V) and a long cycle life (≈190 cycles).

Desolvation Synergy of Multiple H/Li-Bonds on an Iron-Dextran-Based Catalyst Stimulates Lithium-Sulfur Cascade Catalysis

Traditional lithium-sulfur battery catalysts are still facing substantial challenges in solving sulfur redox reactions, which involve multistep electron transfer and multiphase transformations. Here, inspired by the combination of iron dextran (INFeD) and ascorbic acid (VC) as a blood tonic for the treatment of anemia, a highly efficient VC@INFeD catalyst is developed in the sulfur cathode, accomplishing the desolvation and enrichment of high-concentration solvated lithium polysulfides at the cathode/electrolyte interface with the assistance of multiple H/Li-bonds and resolving subsequent sulfur transformations through gradient catalysis sites where the INFeD promotes long-chain lithium polysulfide conversions and VC accelerates short-chain lithium polysulfide conversions. Comprehensive characterizations reveal that the VC@INFeD can substantially reduce the energy barrier of each sulfur redox step, inhibit shuttle effects, and endow the lithium-sulfur battery with high sulfur utilization and superior cycling stability even under a high sulfur loading (5.2 mg cm^-2 ) and lean electrolyte (electrolyte/sulfur ratio, ≈7 µL mg^-1 ) condition.

Evolving aprotic Li-air batteries

Lithium-air batteries (LABs) have attracted tremendous attention since the proposal of the LAB concept in 1996 because LABs have a super high theoretical/practical specific energy and an infinite supply of redox-active materials, and are environment-friendly. However, due to the lack of critical electrode materials and a thorough understanding of the chemistry of LABs, the development of LABs entered a germination period before 2010, when LABs research mainly focused on the development of air cathodes and carbonate-based electrolytes. In the growing period, i.e., from 2010 to the present, the investigation focused more on systematic electrode design, fabrication, and modification, as well as the comprehensive selection of electrolyte components. Nevertheless, over the past 25 years, the development of LABs has been full of retrospective steps and breakthroughs. In this review, the evolution of LABs is illustrated along with the constantly emerging design, fabrication, modification, and optimization strategies. At the end, perspectives and strategies are put forward for the development of future LABs and even other metal-air batteries.

Genome-scale modeling drives 70-fold improvement of intracellular heme production in Saccharomyces cerevisiae

Heme availability in the cell enables the proper folding and function of enzymes, which carry heme as a cofactor. Using genome-scale modeling, we identified metabolic fluxes and genes that limit heme production. Our study experimentally validates ecYeast8 model predictions. Moreover, we developed an approach to predict gene combinations, which provides an in silico design of a viable strain able to overproduce the metabolite of interest. Using our approach, we constructed a yeast strain that produces 70-fold-higher levels of intracellular heme. With its high-capacity metabolic subnetwork, our engineered strain is a suitable platform for the production of additional heme enzymes. The heme ligand-binding biosensor (Heme-LBB) detects the cotranslational incorporation of heme into the heme-protein hemoglobin.

Heme is an oxygen carrier and a cofactor of both industrial enzymes and food additives. The intracellular level of free heme is low, which limits the synthesis of heme proteins. Therefore, increasing heme synthesis allows an increased production of heme proteins. Using the genome-scale metabolic model (GEM) Yeast8 for the yeast Saccharomyces cerevisiae, we identified fluxes potentially important to heme synthesis. With this model, in silico simulations highlighted 84 gene targets for balancing biomass and increasing heme production. Of those identified, 76 genes were individually deleted or overexpressed in experiments. Empirically, 40 genes individually increased heme production (up to threefold). Heme was increased by modifying target genes, which not only included the genes involved in heme biosynthesis, but also those involved in glycolysis, pyruvate, Fe-S clusters, glycine, and succinyl-coenzyme A (CoA) metabolism. Next, we developed an algorithmic method for predicting an optimal combination of these genes by using the enzyme-constrained extension of the Yeast8 model, ecYeast8. The computationally identified combination for enhanced heme production was evaluated using the heme ligand-binding biosensor (Heme-LBB). The positive targets were combined using CRISPR-Cas9 in the yeast strain (IMX581-HEM15-HEM14-HEM3-Δshm1-HEM2-Δhmx1-FET4-Δgcv2-HEM1-Δgcv1-HEM13), which produces 70-fold-higher levels of intracellular heme.

De novo designed peptides form a highly catalytic ordered nanoarchitecture on a graphite surface

Here we demonstrate that short peptides, de novo designed from first principles, self-assemble on the surface of graphite to produce a highly robust and catalytic nanoarchitecture, which promotes peroxidation reactions with activities that rival those of natural enzymes in both single and multi-substrate reactions. These designable peptides recapitulate the symmetry of the underlying graphite surface and act as molecular scaffolds to immobilize hemin molecules on the electrode in a hierarchical self-assembly manner. The highly ordered and uniform hybrid graphite-peptide-hemin nanoarchitecture shows the highest faradaic efficiency of any hybrid electrode reported. Given the explosive growth of the types of chemical reactions promoted by self-assembled peptide materials, this new approach to creating complex electrocatalytic assemblies will yield highly efficient and practically applicable electrocatalysts.

A long-life lithium-oxygen battery via a molecular quenching/mediating mechanism

The advancement of lithium-oxygen (Li-O2) batteries has been hindered by challenges including low discharge capacity, poor energy efficiency, severe parasitic reactions, etc. We report an Li-O2 battery operated via a new quenching/mediating mechanism that relies on the direct chemical reactions between a versatile molecule and superoxide radical/Li2O2. The battery exhibits a 46-fold increase in discharge capacity, a low charge overpotential of 0.7 V, and an ultralong cycle life >1400 cycles. Featuring redox-active 2,2,6,6-tetramethyl-1-piperidinyloxy moieties bridged by a quenching-active perylene diimide backbone, the tailor-designed molecule acts as a redox mediator to catalyze discharge/charge reactions and serves as a reusable superoxide quencher to chemically react with superoxide species generated during battery operation. The all-in-one molecule can simultaneously tackle issues of parasitic reactions associated with superoxide radicals, singlet oxygen, high overpotentials, and lithium corrosion. The molecular design of multifunctional additives combining various capabilities opens a new avenue for developing high-performance Li-O2 batteries.

OUP accepted manuscript

Aprotic lithium–oxygen (Li–O₂) batteries are receiving intense research interest by virtue of their ultra-high theoretical specific energy. However, current Li–O₂ batteries are suffering from severe barriers, such as sluggish reaction kinetics and undesired parasitic reactions. Recently, molecular catalysts, i.e. redox mediators (RMs), have been explored to catalyse the oxygen electrochemistry in Li–O₂ batteries and are regarded as an advanced solution. To fully unlock the capability of Li–O₂ batteries, an in-depth understanding of the catalytic mechanisms of RMs is necessary. In this review, we summarize the working principles of RMs and their selection criteria, highlight the recent significant progress of RMs and discuss the critical scientific and technical challenges on the design of efficient RMs for next-generation Li–O₂ batteries.

Magnetic and Optical Field Multi-Assisted Li-O2 Batteries with Ultrahigh Energy Efficiency and Cycle Stability

The photoassisted lithium-oxygen (Li-O₂ ) system has emerged as an important direction for future development by effectively reducing the large overpotential in Li-O₂ batteries. However, the advancement is greatly hindered by the rapidly recombined photoexcited electrons and holes upon the discharging and charging processes. Herein, a breakthrough is made in overcoming these challenges by developing a new magnetic and optical field multi-assisted Li-O₂ battery with 3D porous NiO nanosheets on the Ni foam (NiO/FNi) as a photoelectrode. Under illumination, the photogenerated electrons and holes of the NiO/FNi photoelectrode play a key role in reducing the overpotential during discharging and charging, respectively. By introducing the external magnetic field, the Lorentz force acts oppositely on the photogenerated electrons and holes, thereby suppressing the recombination of charge carriers. The magnetic and optical field multi-assisted Li-O₂ battery achieves an ultralow charge potential of 2.73 V, a high energy efficiency of 96.7%, and good cycling stability. This external magnetic and optical field multi-assisted technology paves a new way of developing high-performance Li-O₂ batteries and other energy storage systems.

Revealing the catalytic pathway of a quinone-mediated oxygen reduction reaction in aprotic Li-O2 batteries

Soluble redox species that facilitate the oxygen reduction reaction by mediating the LiO₂ intermediate and consequently the formation of the Li₂O₂ have attracted considerable interest for Li-O₂ batteries. Based on extensive radical studies, this work discloses a distinct solution reaction route when a quinone derivative was employed as a redox mediator.

The Integrity of Heme Is Essential for Reproducible Detection of Metronidazole-Resistant Clostridioides difficile by Agar Dilution Susceptibility Tests

Metronidazole resistance in clinical Clostridioides difficile is often described as unstable, since resistant strains reportedly appear susceptible following freezer storage or brief passage. This has presented a conundrum for adopting susceptibility testing to accurately evaluate the connection between metronidazole resistance and decreased clinical efficacy of metronidazole in patients with C. difficile infections (CDIs). We discovered that supplementation of microbiological media with the metalloporphyrin heme is crucial for detection of metronidazole-resistant C. difficile using the agar dilution susceptibility testing method. Known metronidazole-resistant strains appeared susceptible to metronidazole in media lacking heme. Similarly, these resistant strains exhibited increased susceptibility to metronidazole when tested on heme-containing agars that were exposed to room light for more than 1 day, likely due to heme photodecomposition. In parallel experiments, resistance was reproducibly detected when heme-containing agars were either prepared and used on the same day or protected from light and then used on subsequent days. Notably, heme did not influence the susceptibilities of drug-susceptible strains that were of the same ribotype as the resistant strains. These findings firmly show that the consistent detection of metronidazole-resistant C. difficile is dependent upon heme and its protection from light. Studies are warranted to determine the extent to which this heme-associated metronidazole-resistant phenotype affects the clinical efficacy of metronidazole in CDI and the underlying genetic and biochemical mechanisms.

CO2 doping of organic interlayers for perovskite solar cells

In perovskite solar cells, doped organic semiconductors are often used as charge-extraction interlayers situated between the photoactive layer and the electrodes. The π-conjugated small molecule 2,2',7,7'-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9-spirobifluorene (spiro-OMeTAD) is the most frequently used semiconductor in the hole-conducting layer^1-6, and its electrical properties considerably affect the charge collection efficiencies of the solar cell⁷. To enhance the electrical conductivity of spiro-OMeTAD, lithium bis(trifluoromethane)sulfonimide (LiTFSI) is typically used in a doping process, which is conventionally initiated by exposing spiro-OMeTAD:LiTFSI blend films to air and light for several hours. This process, in which oxygen acts as the p-type dopant^8-11, is time-intensive and largely depends on ambient conditions, and thus hinders the commercialization of perovskite solar cells. Here we report a fast and reproducible doping method that involves bubbling a spiro-OMeTAD:LiTFSI solution with CO₂ under ultraviolet light. CO₂ obtains electrons from photoexcited spiro-OMeTAD, rapidly promoting its p-type doping and resulting in the precipitation of carbonates. The CO₂-treated interlayer exhibits approximately 100 times higher conductivity than a pristine film while realizing stable, high-efficiency perovskite solar cells without any post-treatments. We also show that this method can be used to dope π-conjugated polymers.

Nature-inspired hierarchical materials for sensing and energy storage applications

Nature-inspired hierarchical architectures have recently drawn enormous interest in the materials science community, being considered as promising materials for the development of high-performance wearable electronic devices. Their highly dynamic interfacial interactions have opened new horizons towards the fabrication of sustainable sensing and energy storage materials with multifunctional properties. Nature-inspired assemblies can exhibit impressive properties including ultrahigh sensitivity, excellent energy density and coulombic efficiency behaviors as well as ultralong cycling stability and durability, which can be finely tuned and enhanced by controlling synergistic interfacial interactions between their individual components. This tutorial review article aims to address recent breakthroughs in the development of advanced Nature-inspired sensing and energy storage materials, with special emphasis on the influence of interfacial interactions over their improved properties.

Lithium-Air Batteries: Air-Breathing Challenges and Perspective

Lithium-oxygen (Li-O₂) batteries have been intensively investigated in recent decades for their utilization in electric vehicles. The intrinsic challenges arising from O₂ (electro)chemistry have been mitigated by developing various types of catalysts, porous electrode materials, and stable electrolyte solutions. At the next stage, we face the need to reform batteries by substituting pure O₂ gas with air from Earth's atmosphere. Thus, the key emerging challenges of Li-air batteries, which are related to the selective filtration of O₂ gas from air and the suppression of undesired reactions with other constituents in air, such as N₂, water vapor (H₂O), and carbon dioxide (CO₂), should be properly addressed. In this review, we discuss all key aspects for developing Li-air batteries that are optimized for operating in ambient air and highlight the crucial considerations and perspectives for future air-breathing batteries.

Recent Advances in Single-Atom Electrocatalysts for Oxygen Reduction Reaction

Oxygen reduction reaction (ORR) plays significant roles in electrochemical energy storage and conversion systems as well as clean synthesis of fine chemicals. However, the ORR process shows sluggish kinetics and requires platinum-group noble metal catalysts to accelerate the reaction. The high cost, rare reservation, and unsatisfied durability significantly impede large-scale commercialization of platinum-based catalysts. Single-atom electrocatalysts (SAECs) featuring with well-defined structure, high intrinsic activity, and maximum atom efficiency have emerged as a novel field in electrocatalytic science since it is promising to substitute expensive platinum-group noble metal catalysts. However, finely fabricating SAECs with uniform and highly dense active sites, fully maximizing the utilization efficiency of active sites, and maintaining the atomically isolated sites as single-atom centers under harsh electrocatalytic conditions remain urgent challenges. In this review, we summarized recent advances of SAECs in synthesis, characterization, oxygen reduction reaction (ORR) performance, and applications in ORR-related H₂O₂ production, metal-air batteries, and low-temperature fuel cells. Relevant progress on tailoring the coordination structure of isolated metal centers by doping other metals or ligands, enriching the concentration of single-atom sites by increasing metal loadings, and engineering the porosity and electronic structure of the support by optimizing the mass and electron transport are also reviewed. Moreover, general strategies to synthesize SAECs with high metal loadings on practical scale are highlighted, the deep learning algorithm for rational design of SAECs is introduced, and theoretical understanding of active-site structures of SAECs is discussed as well. Perspectives on future directions and remaining challenges of SAECs are presented.

Structure-properties relationship for energy storage redox polymers: a review

Redox-active polymers among the energy storage materials (ESMs) are very attractive due to their exceptional advantages such as high stability and processability as well as their simple manufacturing. Their applications are found to useful in electric vehicle, ultraright computers, intelligent electric gadgets, mobile sensor systems, and portable intelligent clothing. They are found to be more efficient and advantageous in terms of superior processing capacity, quick loading unloading, stronger security, lengthy life cycle, versatility, adjustment to various scales, excellent fabrication process capabilities, light weight, flexible, most significantly cost efficiency, and non-toxicity in order to satisfy the requirement for the usage of these potential applications. The redox-active polymers are produced through organic synthesis, which allows the design and free modification of chemical constructions, which allow for the structure of organic compounds. The redox-active polymers can be finely tuned for the desired ESMs applications with their chemical structures and electrochemical properties. The redox-active polymers synthesis also offers the benefits of high-scale, relatively low reaction, and a low demand for energy. In this review we discussed the relationship between structural properties of different polymers for solar energy and their energy storage applications.

Lithium-Oxygen Batteries and Related Systems: Potential, Status, and Future

The goal of limiting global warming to 1.5 °C requires a drastic reduction in CO₂ emissions across many sectors of the world economy. Batteries are vital to this endeavor, whether used in electric vehicles, to store renewable electricity, or in aviation. Present lithium-ion technologies are preparing the public for this inevitable change, but their maximum theoretical specific capacity presents a limitation. Their high cost is another concern for commercial viability. Metal-air batteries have the highest theoretical energy density of all possible secondary battery technologies and could yield step changes in energy storage, if their practical difficulties could be overcome. The scope of this review is to provide an objective, comprehensive, and authoritative assessment of the intensive work invested in nonaqueous rechargeable metal-air batteries over the past few years, which identified the key problems and guides directions to solve them. We focus primarily on the challenges and outlook for Li-O₂ cells but include Na-O₂, K-O₂, and Mg-O₂ cells for comparison. Our review highlights the interdisciplinary nature of this field that involves a combination of materials chemistry, electrochemistry, computation, microscopy, spectroscopy, and surface science. The mechanisms of O₂ reduction and evolution are considered in the light of recent findings, along with developments in positive and negative electrodes, electrolytes, electrocatalysis on surfaces and in solution, and the degradative effect of singlet oxygen, which is typically formed in Li-O₂ cells.

Synergistic Control of Structural Disorder and Surface Bonding Nature to Optimize the Functionality of Manganese Oxide as an Electrocatalyst and a Cathode for Li-O2 Batteries

An efficient way to improve the electrocatalyst and Li-O₂ battery performances of metal oxide is developed by an exquisite synergistic control over structural disorder and surface bonding nature. The effects of amorphous nature and surface chemical environment on the functionalities of metal oxide are systematically investigated with well-crystalline and amorphous MnO₂ nanocrystals with/without surface anchoring of highly oxidized iodate clusters. The amorphous MnO₂ nanocrystal containing anchored iodate clusters shows much better performance as an oxygen evolution electrocatalyst and cathode catalyst for Li-O₂ batteries than both iodate-free amorphous and well-crystalline homologues, underscoring the remarkable advantage of simultaneous enhancement of structural disorder and surface electron density. In situ X-ray absorption spectroscopic analysis demonstrates the promoted formation of double (MnO) bond, a critical step of oxygen evolution reaction, upon amorphization caused by the poor orbital overlap inside highly disordered crystallites. The beneficial effects of iodate anchoring and amorphization on electrocatalyst functionality are attributable to the alteration of surface bonding character, stabilization of Jahn-Teller active Mn³⁺ species, and enhanced charge transfer of interfaces. The present study underscores that fine-tuning of structural disorder and surface bonding nature provides an effective methodology to explore efficient metal oxide-based electrocatalysts.

Current Challenges and Routes Forward for Nonaqueous Lithium-Air Batteries

Nonaqueous lithium-air batteries have garnered considerable research interest over the past decade due to their extremely high theoretical energy densities and potentially low cost. Significant advances have been achieved both in the mechanistic understanding of the cell reactions and in the development of effective strategies to help realize a practical energy storage device. By drawing attention to reports published mainly within the past 8 years, this review provides an updated mechanistic picture of the lithium peroxide based cell reactions and highlights key remaining challenges, including those due to the parasitic processes occurring at the reaction product-electrolyte, product-cathode, electrolyte-cathode, and electrolyte-anode interfaces. We introduce the fundamental principles and critically evaluate the effectiveness of the different strategies that have been proposed to mitigate the various issues of this chemistry, which include the use of solid catalysts, redox mediators, solvating additives for oxygen reaction intermediates, gas separation membranes, etc. Recently established cell chemistries based on the superoxide, hydroxide, and oxide phases are also summarized and discussed.

Redox mediators as charge agents for changing electrochemical reactions

This review provides a comprehensive discussion toward understanding the effects of RMs in electrochemical systems, underlying redox mechanisms, and reaction kinetics both experimentally and theoretically.

Electrolytes for Rechargeable Lithium-Air Batteries

Lithium-air batteries are promising devices for electrochemical energy storage because of their ultrahigh energy density. However, it is still challenging to achieve practical Li-air batteries because of their severe capacity fading and poor rate capability. Electrolytes are the prime suspects for cell failure. In this Review, we focus on the opportunities and challenges of electrolytes for rechargeable Li-air batteries. A detailed summary of the reaction mechanisms, internal compositions, instability factors, selection criteria, and design ideas of the considered electrolytes is provided to obtain appropriate strategies to meet the battery requirements. In particular, ionic liquid (IL) electrolytes and solid-state electrolytes show exciting opportunities to control both the high energy density and safety.

Building Better Batteries in the Solid State: A Review

Most of the current commercialized lithium batteries employ liquid electrolytes, despite their vulnerability to battery fire hazards, because they avoid the formation of dendrites on the anode side, which is commonly encountered in solid-state batteries. In a review two years ago, we focused on the challenges and issues facing lithium metal for solid-state rechargeable batteries, pointed to the progress made in addressing this drawback, and concluded that a situation could be envisioned where solid-state batteries would again win over liquid batteries for different applications in the near future. However, an additional drawback of solid-state batteries is the lower ionic conductivity of the electrolyte. Therefore, extensive research efforts have been invested in the last few years to overcome this problem, the reward of which has been significant progress. It is the purpose of this review to report these recent works and the state of the art on solid electrolytes. In addition to solid electrolytes stricto sensu, there are other electrolytes that are mainly solids, but with some added liquid. In some cases, the amount of liquid added is only on the microliter scale; the addition of liquid is aimed at only improving the contact between a solid-state electrolyte and an electrode, for instance. In some other cases, the amount of liquid is larger, as in the case of gel polymers. It is also an acceptable solution if the amount of liquid is small enough to maintain the safety of the cell; such cases are also considered in this review. Different chemistries are examined, including not only Li-air, Li-O2, and Li-S, but also sodium-ion batteries, which are also subject to intensive research. The challenges toward commercialization are also considered.

Biomimetic Superoxide Disproportionation Catalyst for Anti-Aging Lithium-Oxygen Batteries

Reactive oxygen species or superoxide (O₂^-), which damages or ages biological cells, is generated during metabolic pathways using oxygen as an electron acceptor in biological systems. Superoxide dismutase (SOD) protects cells from superoxide-triggered apoptosis by converting superoxide to oxygen and peroxide. Lithium-oxygen battery (LOB) cells have the same aging problems caused by superoxide-triggered side reactions. We transplanted the function of SOD of biological systems into LOB cells. Malonic acid-decorated fullerene (MA-C₆₀) was used as a superoxide disproportionation chemocatalyst mimicking the function of SOD. As expected, MA-C₆₀ as the superoxide scavenger improved capacity retention along charge/discharge cycles successfully. A LOB cell that failed to provide a meaningful capacity just after several cycles at high current (0.5 mA cm^-2) with 0.5 mAh cm^-2 cutoff survived up to 50 cycles after MA-C₆₀ was introduced to the electrolyte. Moreover, the SOD-mimetic catalyst increased capacity, e.g., more than a 6-fold increase at 0.2 mA cm^-2. The experimentally observed toroidal morphology of the final discharge product of oxygen reduction (Li₂O₂) and density functional theory calculation confirmed that the solution mechanism of Li₂O₂ formation, more beneficial than the surface mechanism from the capacity-gain standpoint, was preferred in the presence of MA-C₆₀.

Ultra-Thin Conductive Graphitic Carbon Nitride Assembly through van der Waals Epitaxy toward High-Energy-Density Flexible Supercapacitors

Graphitic carbon nitride is an ordered two-dimensional stability. However, its bulk structure with low electrical conductivity (less than 1 S cm^-1) restricts the applications in electrochemical energy storage. This is because conventional synthesis methods lack effective thickness control, and the excessive nitrogen doping (∼50%) leads to poor electrical conductivity. Here, we report an ultrathin conductive graphitic carbon nitride assembly (thickness of ∼1.0 nm) through graphene-templated van der Waals epitaxial strategy with high electrical conductivity (12.2 S cm^-1), narrow pore-size distribution (5.3 nm), large surface area (724.9 m² g^-1), and appropriate nitrogen doping level (18.29%). The ultra-thin structure with nitrogen doping provided numerous channels and active sites for effective ion transportation and storage, while the graphene layers acted as micro current collectors; subsequently, it exhibits high energy storage capability of 936 mF cm^-2 at 1 mA cm^-2 with excellent stability of over 10 000 cycles. Moreover, the all-solid-state supercapacitors showed an ultra-high energy density of 281.3 μWh cm^-2 at 1 mA cm^-2 with high rate capability, Coulombic efficiency, and flexibility. This work represents a general framework for the bottom-up synthesis of ultrathin 2D materials, which may promote the application of graphitic carbon nitride in energy storage.

A versatile functionalized ionic liquid to boost the solution-mediated performances of lithium-oxygen batteries

Due to the high theoretical specific energy, the lithium-oxygen battery has been heralded as a promising energy storage system for applications such as electric vehicles. However, its large over-potentials during discharge-charge cycling lead to the formation of side-products, and short cycle life. Herein, we report an ionic liquid bearing the redox active 2,2,6,6-tetramethyl-1-piperidinyloxy moiety, which serves multiple functions as redox mediator, oxygen shuttle, lithium anode protector, as well as electrolyte solvent. The additive contributes a 33-fold increase of the discharge capacity in comparison to a pure ether-based electrolyte and lowers the over-potential to an exceptionally low value of 0.9 V. Meanwhile, its molecule facilitates smooth lithium plating/stripping, and promotes the formation of a stable solid electrolyte interface to suppress side-reactions. Moreover, the proportion of ionic liquid in the electrolyte influences the reaction mechanism, and a high proportion leads to the formation of amorphous lithium peroxide and a long cycling life (> 200 cycles). In particular, it enables an outstanding electrochemical performance when operated in air.

Recent Advances in Metallic Glass Nanostructures: Synthesis Strategies and Electrocatalytic Applications

Recent advances in metallic glass nanostructures (MGNs) are reported, covering a wide array of synthesis strategies, computational discovery, and design solutions that provide insight into distinct electrocatalytic applications. A brief introduction to the development and unique features of MGNs with an overview of top-down and bottom-up synthesis strategies is presented. Specifically, the morphology and structural analysis of several examples applying MGNs as electrodes are highlighted. Subsequently, a comprehensive discussion of commonly employed kinetic parameters and their connection with the unique material structures of MGNs on individual electrocatalytic reactions is made, including the hydrogen evolution reaction, oxygen reduction reaction, and alcohol (methanol or ethanol) oxidation reaction. Finally, a summary of the challenges and perspective on the future research and development relevant to MGNs as electrocatalysts is provided.

Promoting Li-O2 Batteries With Redox Mediators

Li-O₂ batteries have a high theoretical specific energy, 3500 Wh kg^-1 ; however, its practical capacity is far below this value and limited by the passivation with the insulating discharge product Li₂ O₂ . The nonconductive nature of Li₂ O₂ also impedes the charging process, leading to a low coulombic efficiency and high overpotential on charge even at a moderate rate. To address these challenges, redox mediators could be used both during discharge and charge to transfer electrons between O₂ /electrode surface or Li₂ O₂ /electrode surface to overcome the passivation of Li₂ O₂ , which would facilitate the discharge and charge process. The capacity and current density were significantly improved using the redox mediators, thus representing a promising strategy to achieve a high energy density for Li-O₂ batteries.

Biosynthesis of organic photosensitizer Zn-porphyrin by diphtheria toxin repressor (DtxR)-mediated global upregulation of engineered heme biosynthesis pathway in Corynebacterium glutamicum

Zn-porphyrin is a promising organic photosensitizer in various fields including solar cells, interface and biomedical research, but the biosynthesis study has been limited, probably due to the difficulty of understanding complex biosynthesis pathways. In this study, we developed a Corynebacterium glutamicum platform strain for the biosynthesis of Zn-coproporphyrin III (Zn-CP III), in which the heme biosynthesis pathway was efficiently upregulated. The pathway was activated and reinforced by strong promoter-induced expression of hemA^M (encoding mutated glutamyl-tRNA reductase) and hemL (encoding glutamate-1-semialdehyde aminotransferase) genes. This engineered strain produced 33.54 ± 3.44 mg/l of Zn-CP III, while the control strain produced none. For efficient global regulation of the complex pathway, the dtxR gene encoding the transcriptional regulator diphtheria toxin repressor (DtxR) was first overexpressed in C. glutamicum with hemA^M and hemL genes, and its combinatorial expression was improved by using effective genetic tools. This engineered strain biosynthesized 68.31 ± 2.15 mg/l of Zn-CP III. Finally, fed-batch fermentation allowed for the production of 132.09 mg/l of Zn-CP III. This titer represents the highest in bacterial production of Zn-CP III reported to date, to our knowledge. This study demonstrates that engineered C. glutamicum can be a robust biotechnological model for the production of photosensitizer Zn-porphyrin.

Bifunctional Solid Catalyst for Organic Reactions in Water: Simultaneous Anchoring of Acetylacetone Ligands and Amphiphilic Ionic Liquid "Tags" by Using a Dihydropyran Linker

The use of solid catalysts to promote organic reactions in water faces the inherent difficulty of the poor mass-transfer efficiency of organic substances in water, which is often responsible for insufficient reaction and low yields. To solve this problem, the solid surface can be manipulated to become amphiphilic. However, the introduction of surfactant-like moieties onto the surface of silica-based materials is not easy. By using an accessible dihydropyran derivative as a grafting linker, a surfactant-combined bifunctional silica-based solid catalyst that possessed an ionic liquid tail and a metal acetylacetonate moiety was prepared through a mild Lewis-acid-catalyzed ring-opening reaction with a thiol-functionalized silica. The surfactant-combined silica-supported metal acetylacetone catalysts displayed excellent catalytic activity in water for a range of reactions. The solid catalyst was also shown to be recyclable, and was reused several times without significant loss in activity.

The Salt Matters: Enhanced Reversibility of Li-O2 Batteries with a Li[(CF3 SO2 )(n-C4 F9 SO2 )N]-Based Electrolyte

The safety hazards and cycle instability of lithium metal anodes (LMA) constitute significant barriers to progress in lithium metal batteries. This situation is worse in Li-O₂ batteries because the LMA is prone to be chemically attacked by O₂ shuttled from the cathode. Notwithstanding, efforts on LMA are much sparse than those on the cathode in the realm of Li-O₂ batteries. Here, a novel lithium salt of Li[(CF₃ SO₂ )(n-C₄ F₉ SO₂ )N] (LiTNFSI) is reported, which can effectively suppress the parasitic side reactions and dendrite growth of LMA during cycling and thereby significantly enhance the overall reversibility of Li-O₂ batteries. A variety of advanced research tools are employed to scrutinize the working principles of the LiTNFSI salt. It is revealed that a stable, uniform, and O₂ -resistive solid electrolyte interphase is formed on LMA, and hence the "cross-talk" between the LMA and O₂ shuttled from the cathode is remarkably inhibited in LiTNFSI-based Li-O₂ batteries.

Functional and stability orientation synthesis of materials and structures in aprotic Li–O2batteries

This review presents the recent advances made in the functional and stability orientation synthesis of materials/structures for Li–O₂batteries.