A microRNA-initiated DNAzyme motor operating in living cells

DNA Nanotechnology Targeting Mitochondria: From Subcellular Molecular Imaging to Tailor-Made Therapeutics

Mitochondria, one of the most important organelles, represent a crucial subcellular target for fundamental research and biomedical applications. Despite significant advances in the design of DNA nanotechnologies for a variety of bio-applications, the dearth of strategies that enable mitochondria targeting for subcellular molecular imaging and therapy remains an outstanding challenge in this field. In this Minireview, we summarize the recent progresses on the emerging design and application of DNA nanotechnology for mitochondria-targeted molecular imaging and tumor treatment. We first highlight the engineering of mitochondria-localized DNA nanosensors for in situ detection and imaging of diverse key molecules that are essential to maintain mitochondrial functions, including mitochondrial DNA and microRNA, enzymes, small molecules, and metal ions. Then, we compile the developments of DNA nanotechnologies for mitochondria-targeted anti-tumor therapy, including modularly designed DNA nanodevices for subcellular delivery of therapeutic agents, and programmed DNA assembly for mitochondrial interference. We will place an emphasis on clarification of the chemical principles of how DNA nanobiotechnology can be designed to target mitochondria for various biomedical applications. Finally, the remaining challenges and future directions in this emerging field will be discussed, hoping to inspire further development of advanced DNA toolkits for both academic and clinical research regarding mitochondria.

RNA-Activated CRISPR/Cas12a Nanorobots Operating in Living Cells

Active clustered regularly interspaced short palindromic repeats (CRISPR/Cas12a) systems possess both cis-cleavage (targeted) and trans-cleavage (collateral) activities, which are useful for genome engineering and diagnostic applications. Both single- and double-stranded DNA can activate crRNA-Cas12a ribonucleoprotein (RNP) to achieve cis- and trans-cleavage enzymatic activities. However, it is not clear whether RNA can activate the CRISPR/Cas12a system and what is critical to the trans-cleavage activity. We report here that RNA can activate the CRISPR/Cas12a system and trigger its trans-cleavage activity. We reveal that the activated crRNA-Cas12a RNP favors the trans-cleavage of longer sequences than commonly used. These new findings of the RNA-activated trans-cleavage capability of Cas12a provided the foundation for the design and construction of CRISPR nanorobots that operate in living cells. We assembled the crRNA-Cas12a RNP and nucleic acid substrates on gold nanoparticles to form CRISPR nanorobots, which dramatically increased the local effective concentration of the substrate in relation to the RNP and the trans-cleavage kinetics. Binding of the target microRNA to the crRNA-Cas12a RNP activated the nanorobots and their trans-cleavage function. The repeated (multiple-turnover) trans-cleavage of the fluorophore-labeled substrates generated amplified fluorescence signals. Sensitive and real-time imaging of specific microRNA in live cells demonstrated the promising potential of the CRISPR nanorobot system for future applications in monitoring and modulating biological functions within living cells.

Persistent autonomous molecular motion of DNA walker along a single-molecule nano-track for intracellular MicroRNA imaging

While the intracellular imaging of miRNA biomarkers is of significant importance for the diagnosis and treatment of human cancers, DNA assembled nanoprobe has recently attracted considerable attention for imaging intracellular biomolecules. However, the complex construction process, intrinsic vulnerability to nuclease degradation and the limited signal transduction efficiency hamper its widespread application. In this contribution, based on persistent autonomous molecular motion of DNAzyme walker along a nano-substrate track, a DNA nanosphere probe (PNLD) is developed for the sensitive intracellular miR-21 imaging. Specifically, DNA nanosphere (called PN, single-molecule nano-track) is assembled from only one palindromic substrate, into which the locking strand-silenced DNAzymes (LD) are installed in a controlled manner. PNLD (made of PN and LD) can protect all DNA components against nuclease attack and maintain its structural integrity in serum solution over 24 h. Upon the activation by target miRNA, DNAzyme walker can move on the substrate scattered within PNLD (or on the surface) and between different PNLD objects and cleave many DNA substrates, generating an amplified signal. As a result, miR-21 can be detected down to 6.83 pM without the detectable interference from co-existing nontarget miRNAs. Moreover, PNLD system can accurately screen the different expression levels of miR-21 within the same type of cells and different types of cells, which is consistent with gold standard polymerase chain reaction (PCR) assay. Via changing the target recognition sequence, the PNLD system can be suitable for the intracellular imaging of miR-155, exhibiting the desirable universality. In addition, the DNAzyme walker-based PNLD system can be used to distinguish cancer cells from healthy cells, implying the potential application in cancer diagnosis and prognosis.

Target-induced DNA nanomachine operation for the detection of proteins

Accurate and sensitive detection of disease-associated proteins in early stage of patients plays an important role in timely treatment and successfully extending patients' lives. To meet this demand, we herein rationally designed a flexible target-induced DNA nanomachine operation (TIDNMO) sensor for the detection of proteins. The TIDNMO system was composed of DNA nanoswitch and DNA walker. Triplex DNA nanoswitch was triggered by specific target, followed by the release of the walking strand, which initiated the DNA walker amplification as signal output. In addition, the Exo III could drive walking strand autonomously move on gold nanoparticle surface to realize 2 orders of magnitude signal amplification. What's more, this sensor could transform its suitable functional recognition element of DNA nanoswitch to recognize other specific molecule and realize different targets sensing based on identical walking tracks. Considering the facile reporter elements and efficient amplification performance, the present DNA nanomachine as a sensor could achieve a detection limit of 68 pM for anti-Dig antibody, 0.95 pM for mucin-1 respectively, along with a superb specificity. Furthermore, the method reported here opened a new chapter in disease-related protein sensing for the development of clinical early diagnosis.

Construction of Multiply Guaranteed DNA Sensors for Biological Sensing and Bioimaging Applications

Nucleic acids exhibit exceptional functionalities for both molecular recognition and catalysis, along with the capability of predictable assembly through strand displacement reactions. The inherent programmability and addressability of DNA probes enable their precise, on-demand assembly and accurate execution of hybridization, significantly enhancing target detection capabilities. Decades of research in DNA nanotechnology have led to advances in the structural design of functional DNA probes, resulting in increasingly sensitive and robust DNA sensors. Moreover, increasing attention has been devoted to enhancing the accuracy and sensitivity of DNA-based biosensors by integrating multiple sensing procedures. In this review, we summarize various strategies aimed at enhancing the accuracy of DNA sensors. These strategies involve multiple guarantee procedures, utilizing dual signal output mechanisms, and implementing sequential regulation methods. Our goal is to provide new insights into the development of more accurate DNA sensors, ultimately facilitating their widespread application in clinical diagnostics and assessment.

Simulation-Guided Rational Design of DNA Walker-Based Theranostic Platform

Biomolecule-functionalized nanoparticles represent a type of promising biomaterials in biomedical applications owing to their excellent biocompatibility and versatility. DNA-based reactions on nanoparticles have enabled emerging applications including intelligent biosensors, drug delivery, and biomimetic devices. Among the reactions, strand hybridization is the critical step to control the sensitivity and specificity of biosensing, and the efficiency of drug delivery. However, a comprehensive understanding of DNA hybridization on nanoparticles is still lacking, which may differ from the process in homogeneous solutions. To address this limitation, coarse-grained model-based molecular dynamic simulation is harnessed to disclose the critical factors involved in intermolecular hybridization. Based on simulation guidance, DNA walker-based smart theranostic platform (DWTP) based on "on-particle" hybridization is developed, showing excellent consistency with simulation. DWTP is successfully applied for highly sensitive miRNA 21 detection and tumor-specific miRNA 21 imaging, driven by tumor-endogenous APE 1 enzyme. It enables the precise release of antisense oligonucleotide triggered by tumor-endogenous dual-switch miRNA 21 and APE 1, facilitating effective gene silencing therapy with high biosafety. The simulation of "on-particle" DNA hybridization has improved the corresponding biosensing performance and the release efficiency of therapeutic agents, representing a conceptually new approach for DNA-based device design.

Light-activated CRISPR-Cas12a for amplified imaging of microRNA in cell cycle phases at single-cell levels

An ortho-nitrobenzyl phosphate ester-caged nucleic acid hairpin structure coupled to the CRISPR-Cas12a complex is introduced as a functional reaction module for the light-induced activation of the CRISPR-Cas12a (LAC12a) machinery toward the amplified fluorescence detection of microRNA-21 (miRNA-21). The LAC12a machinery is applied for the selective, in vitro sensing of miRNA-21 and for the intracellular imaging of miRNA-21 in different cell lines. The LAC12a system is used to image miRNA-21 in different cell cycle phases of MCF-7 cells. Moreover, the LAC12a machinery integrated in cells enables the two-photon laser confocal microscopy-assisted, light-stimulated spatiotemporal, selective activation of the CRISPR-Cas12a miRNA-21 imaging machinery at the single-cell level and the evaluation of relative expression levels of miRNA-21 at distinct cell cycle phases. The method is implemented to map the distribution of cell cycle phases in an array of single cells.

An extracellular vesicle microRNA-initiated 3D DNAzyme motor for colorectal cancer diagnosis

MicroRNA is regarded as a significant biomarker for cancer diagnosis, disease process evaluation and therapeutic guidance, and dual-parameter measurement may contribute to a more accurate and realistic assessment. To meet the urgent need for simultaneous detection of multiple biomarkers, we combined three-dimensional DNAzyme motors with single molecule imaging technique to construct a convenient, intuitive, and sensitive approach for the simultaneous detection of dual miRNAs in the free state or in extracellular vesicles. Quantification of target miRNAs can be realized through the detection of amplified fluorescence signals generated by the target miRNA-initiated cleavage of fluorescent substrate strands by the DNAzyme motors. The practicability was systematically validated with microRNA-21-5p and microRNA-10b-5p as targets, acquiring a satisfactory sensitivity sufficient to detect low abundance targets at 0.5 or 1 pM to 100 pM. Besides, the extracellular vesicular miRNAs can be conveniently detected without extraction. The clinical applicability was verified with a series of extracellular vesicles from clinical samples, which exhibited good distinguishability between colorectal cancer patients and healthy donors. In addition to the advantages of good specificity and high sensitivity, the system has potential to be easily adapted by minor alteration of the DNA sequences and fluorophore sets for detection of multiple miRNAs and even other types of biomarkers such as proteins. Therefore, it shows promise to be widely applied in various fields such as early diagnosis of cancer and its prognostic assessment.

A dual-core 3D DNA nanomachine based on DNAzyme positive feedback loop for highly sensitive MicroRNA imaging in living cells

A double 3D DNA walker nanomachine by DNAzyme self-driven positive feedback loop amplification for the detection of miRNA was constructed. This method uses two gold nanoparticles as the reaction core, and because of the spatial confinement effect the local concentration of the reactants increase the collision efficiency was greatly improved. Meanwhile, the introduction of positive feedback loop promotes the conversion efficiency. In presence of miRNA-21, a large amount of DNAzyme was released and hydrolyze the reporter probe, resulting the recovery of fluorescence signal. The linear range for miRNA-21 is 0.5-60 pmol/L, and the detection limit is 0.41 pmol/L (S/N = 3). This nanomachine has been successfully used for accurate detection of miRNA-21 expression levels in cell lysates. At the same time, it can enter cells for intracellular miRNA-21 fluorescence imaging, distinguishing tumor cells from normal cells. This combination of in vitro detection and imaging analysis of living cells can achieve the goal of jointly detecting cancer markers through multiple pathways, providing new ideas for early diagnosis and screening of diseases.

Catalytic Gold Nanoparticle Assembly Programmed by DNAzyme Circuits

Assembled gold nanoparticle (AuNP) superstructures can generate unique physicochemical characteristics and be used in various applications, thus becoming an attractive research field. Recently, several DNA-assisted gold nanoparticle assembly methods have been rigorously developed that typically require a non-catalytic equimolar molecular assembly to guarantee the designed assembly. Although efficient and accurate, exploring such non-catalytic nanoparticle assemblies in the complex cellular milieu under low trigger concentrations remains challenging. Therefore, developing a catalytic method that facilitates gold nanoparticle assemblies with relatively low DNA trigger concentrations is desirable. In this report, a catalytic method to program gold nanoparticle assemblies by DNAzyme circuits is presented, where only a small number of DNA triggers are able to induce the production of a large number of the desired nanoparticle assemblies. The feasibility of using logic DNAzyme circuits to control catalytic nanoparticle assemblies is experimentally verified. Additionally, catalytic AuNP assembly systems are established with cascading and feedback functions. The work provides an alternative research direction to enrich the tool library of nanoparticle assembly and their application in biosensing and nanomedicine.

Autonomous Feedback-Driven Engineered DNAzyme-Coated Trojan Horse-like Nanocapsules for On-Demand CRISPR/Cas9 Delivery

Manipulating the expression of cellular genes through efficient CRISPR/Cas9 delivery is rapidly evolving into a desirable tumor therapeutics. The exposure of CRISPR/Cas9 to a complex external environment poses challenges for conventional delivery carriers in achieving responsive and accurate release. Here, we report a Trojan horse-like nanocapsule for the on-demand delivery of CRISPR/Cas9 in a microRNA-responsive manner, enabling precise tumor therapy. The nanocapsule comprises a nanoassembled, engineered DNAzyme shell encasing a Cas9/sgRNA complex core. The DNAzyme, functioning as a catalytic unit, undergoes a conformational change in the presence of tumor-associated microRNA, followed by activating a positive feedback-driven autonomous catabolic cycle of the nanocapsule shell. This catabolic cycle is accomplished through chain reactions of DNAzyme "cleavage-hybridization-cleavage", which ensures sensitivity in microRNA recognition and effective release of Cas9/sgRNA. Utilizing this Trojan horse-like nanocapsule, as low as 1.7 pM microRNA-21 can trigger the on-demand release of Cas9/sgRNA, enabling the specific editing of the protumorigenic microRNA coding gene. The resulting upregulation of tumor suppressor genes induces apoptosis in tumor cells, leading to significant inhibition of tumor growth by up to 75.94%. The Trojan horse-like nanocapsule, with superior programmability and biocompatibility, is anticipated to serve as a promising carrier for tailoring responsive gene editing systems, achieving enhanced antitumor specificity and efficacy.

Three-dimensional DNA nanomachine biosensor coupled with CRISPR Cas12a cascade amplification for ultrasensitive detection of carcinoembryonic antigen

The detection of carcinoembryonic antigen (CEA) holds significant importance in the early diagnosis of cancer. However, current methods are hindered by limited accessibility and specificity. This study proposes a rapid and convenient Cas12a-based assay for the direct detection of CEA in clinical serum samples, aiming to address these limitations. The protocol involves a rolling machine operation, followed by a 5-min Cas12a-mediated cleavage process. The assay demonstrates the capability to detect human serum with high anti-interference performance and a detection limit as low as 0.2 ng/mL. The entire testing procedure can be accomplished in 75 min without centrifugation steps, and successfully reduced the limit of detection of traditional DNA walking machine by 50 folds. Overall, the testing procedure can be easily implemented in clinical settings.

Pt-Decorated Gold Nanoflares for High-Fidelity Phototheranostics: Reducing Side-Effects and Enhancing Cytotoxicity toward Target Cells

Functionalized with the Au-S bond, gold nanoflares have emerged as promising candidates for theranostics. However, the presence of intracellular abundantly biothiols compromises the conventional Au-S bond, leading to the unintended release of cargoes and associated side-effects on non-target cells. Additionally, the hypoxic microenvironment in diseased regions limits treatment efficacy, especially in photodynamic therapy. To address these challenges, high-fidelity photodynamic nanoflares constructed on Pt-coated gold nanoparticles (Au@Pt PDNF) were communicated to avoid false-positive therapeutic signals and side-effects caused by biothiol perturbation. Compared with conventional photodynamic gold nanoflares (AuNP PDNF), the Au@Pt PDNF were selectively activated by cancer biomarkers and exhibited high-fidelity phototheranostics while reducing side-effects. Furthermore, the ultrathin Pt-shell catalysis was confirmed to generate oxygen which alleviated hypoxia-related photodynamic resistance and enhanced the antitumor effect. This design might open a new venue to advance theranostics performance and is adaptable to other theranostic nanomaterials by simply adding a Pt shell.

DNA-Based Molecular Machines: Controlling Mechanisms and Biosensing Applications

The rise of DNA nanotechnology has driven the development of DNA-based molecular machines, which are capable of performing specific operations and tasks at the nanoscale. Benefitting from the programmability of DNA molecules and the predictability of DNA hybridization and strand displacement, DNA-based molecular machines can be designed with various structures and dynamic behaviors and have been implemented for wide applications in the field of biosensing due to their unique advantages. This review summarizes the reported controlling mechanisms of DNA-based molecular machines and introduces biosensing applications of DNA-based molecular machines in amplified detection, multiplex detection, real-time monitoring, spatial recognition detection, and single-molecule detection of biomarkers. The challenges and future directions of DNA-based molecular machines in biosensing are also discussed.

Label-free detection of biomolecules using inductively coupled plasma mass spectrometry (ICP-MS)

Bioassays using inductively coupled plasma mass spectrometry (ICP-MS) have gained increasing attention because of the high sensitivity of ICP-MS and the various strategies of labeling biomolecules with detectable metal tags. The classic strategy to tag the target biomolecules is through direct antibody-antigen interaction and DNA hybridization, and requires the separation of the bound from the unbound tags. Label-free ICP-MS techniques for biomolecular assays do not require direct labeling: they generate detectable metal ions indirectly from specific biomolecular reactions, such as enzymatic cleavage. Here, we highlight the development of three main strategies of label-free ICP-MS assays for biomolecules: (1) enzymatic cleavage of metal-labeled substrates, (2) release of immobilized metal ions from the DNA backbone, and (3) nucleic acid amplification-assisted aggregation and release of metal tags to achieve amplified detection. We briefly describe the fundamental basis of these label-free ICP-MS assays and discuss the benefits and drawbacks of various designs. Future research is needed to reduce non-specific adsorption and minimize background and interference. Analytical innovations are also required to confront challenges faced by in vivo applications.

Dual miRNA-Triggered DNA Walker Assisted by APE1 for Specific Recognition of Tumor Cells

The identification of a specific tumor cell is crucial for the early diagnosis and treatment of cancer. However, it remains a challenge due to the limited sensitivity and accuracy, long response time, and low contrast of the recent approaches. In this study, we develop a dual miRNA-triggered DNA walker (DMTDW) assisted by APE1 for the specific recognition of tumor cells. miR-10b and miR-155 were selected as the research models. Without miR-10b and miR-155 presence, the DNA walker remains inactive as its walking strand of W is locked by L1 and L2. After miR-10b and miR-155 are input, the DNA walker is triggered as miR-10b and miR-155 bind to L1 and L2 of W-L1-L2, respectively, unlocking W. The DNA walker is driven by endogenous APE1 that is highly catalytic and is highly expressed in the cytoplasm of tumor cells but barely expressed in normal cells, ensuring high contrast and reaction efficiency for specific recognition of tumor cells. Dual miRNA input is required to trigger the DNA walker, making this strategy with a high accuracy. The DMTDW strategy exhibited high sensitivity for miRNA analysis with a detection limit of 44.05 pM. Living cell-imaging experiments confirmed that the DMTDW could effectively respond to the fluctuation of miRNA and specifically identified MDA-MB-231 cells from different cell lines. The proposed DMTDW is sensitive, rapid, and accurate for specific tumor cell recognition. We believe that the DMTDW strategy can become a powerful diagnostic tool for the specific recognition of tumor cells.

Modular Weaving DNAzyme in Skeleton of DNA Nanocages for Photoactivatable Catalytic Activity Regulation

DNAzymes exhibit tremendous application potentials in the field of biosensing and gene regulation due to its unique catalytic function. However, spatiotemporally controlled regulation of DNAzyme activity remains a daunting challenge, which may cause nonspecific signal leakage or gene silencing of the catalytic systems. Here, we report a photochemical approach via modular weaving active DNAzyme into the skeleton of tetrahedral DNA nanocages (TDN) for light-triggered on-demand liberation of DNAzyme and thus conditional control of gene regulation activity. We demonstrate that the direct encoding of DNAzyme in TDN could improve the biostability of DNAzyme and ensure the delivery efficiency, comparing with the conventional surface anchoring strategy. Furthermore, the molecular weaving of the DNA nanostructures allows remote control of DNAzyme-mediated gene regulation with high spatiotemporal precision of light. In addition, we demonstrate that the approach is applicable for controlled regulation of the gene editing functions of other functional nucleic acids.

Host-Guest Recognition-Mediated Supramolecular Aggregation-Induced Electrochemiluminescence of Iridium(III) Complexes for Nucleic Acid Bioassay

Currently reported aggregation-induced electroluminescence (AIECL) is usually based on the electrostatic integration of luminous monomers, and its application is still limited by the low ECL efficiency and poor structural stability of electrostatic integration-based AIECL emitters. Herein, host-guest recognition-mediated supramolecular AIECL was creatively developed to overcome the defects of electrostatic-integration-based AIECL. Cucurbit[8]uril (CB[8]) as the host recognized tris (2-phenylpyridine) iridium(III) [Ir(ppy)3] as the guest to form a novel supramolecular complex Ir-CB[8]. CB[8] can not only provide a large hydrophobic cavity to efficiently load Ir(ppy)3 and enrich coreactant tripropylamine but also utilize its carbonyl-laced portals to form intramolecular hydrogen bonds to stabilize the supramolecular structure, so Ir-CB[8] revealed excellent AIECL performance. The AIECL emitter Ir-CB[8] coupled the efficient DNA walker to construct a sensing system for miRNA-16 detection. Au nanoparticles@norepinephrine (AuNPs@NE) trapped by single-strand S1 was developed to significantly quench the ECL emission of Ir-CB[8]. When the target microRNA-16 (miRNA-16) existed, H1 was opened and the sequential assembly from H2 to H7 was triggered, forming "windmill"-like DNA walker with six Pb2+-dependent leg DNA. The assembled DNA walker, which was centered on DNA structure, had high efficiency and biocompatibility and can cut S1 to keep the DNA fragment-carrying quencher AuNPs@NE away from the electrode surface, thus restoring the ECL emission of Ir-CB[8] and realizing ultrasensitive detection of miRNA-16. Supramolecular AIECL mediated by host-guest recognition provides a new way for constructing AIECL emitters with excellent structural stability and AIECL efficiency, and an Ir-CB[8] coupling "windmill"-like DNA walker builds a promising ECL-sensing system for bioassay.

Antibody-Bridged DNAzyme Walker for Sensitive Detection of Small Molecules

Sensitive detection of small molecules with biological and environmental interests is important for many applications, such as food safety, disease diagnosis, and environmental monitoring. Herein, we propose a highly selective antibody-bridged DNAzyme walker to sensitively detect small molecules. The antibody-bridged DNAzyme walker consists of a track, small-molecule-labeled DNAzyme walking strand, and antibody against small molecules. The track is built by co-modifying fluorophore-labeled substrates and small-molecule-labeled DNA linkers onto a gold nanoparticle (AuNP). In the absence of the target molecule, the antibody binds small molecule labels at the DNAzyme walking strand and the DNA linker, driving the DNAzyme walking strand on the surface of the AuNP. The attached DNAzyme walking strand moves along the track and cleaves substrates to generate high fluorescence signals to achieve signal amplification. As target molecules exist, they competitively bind with antibody to displace the small-molecule-labeled linker and DNAzyme walking strand, rendering the DNAzyme walker inactive in substrate cleavage and causing weak fluorescence. By using this antibody-bridged DNAzyme walker, we achieved sensitive detection of two biologically important small molecules, digoxin and folic acid. This work provides a new paradigm by combining the signal amplification strategy of a DNA walker and immunorecognition for sensitive and selective detection of small molecules.

Self-Feedback DNAzyme Motor for Cascade-Amplified Imaging of mRNA in Live Cells and In Vivo

DNA motors have attracted extensive interest in biosensing and bioimaging. However, the amplification capacity of the existing DNA motor systems is limited since the products from the walking process are unable to feedback into the original DNA motor systems. As a result, the sensitivities of such systems are limited in the contexts of biosensing and bioimaging. In this study, we report a novel self-feedback DNAzyme motor for the sensitive imaging of tumor-related mRNA in live cells and in vivo with cascade signal amplification capacity. Gold nanoparticles (AuNPs) are modified with hairpin-locked DNAzyme walker and track strands formed by hybridizing Cy5-labeled DNA trigger-incorporated substrate strands with assistant strands. Hybridization of the target mRNA with the hairpin strands activates DNAzyme and promotes the autonomous walking of DNAzyme on AuNPs through DNAzyme-catalyzed substrate cleavage, resulting in the release of many Cy5-labeled substrate segments containing DNA triggers and the generation of an amplified fluorescence signal. Moreover, each released DNA trigger can also bind with the hairpin strand to activate and operate the original motor system, which induces further signal amplification via a feedback mechanism. This motor exhibits a 102-fold improvement in detection sensitivity over conventional DNAzyme motors and high selectivity for target mRNA. It has been successfully applied to distinguish cancer cells from normal cells and diagnose tumors in vivo based on mRNA imaging. The proposed DNAzyme motor provides a promising paradigm for the amplified detection and sensitive imaging of low-abundance biomolecules in vivo.

A Programmable DNAzyme for the Sensitive Detection of Nucleic Acids

Nucleic acids in biofluids are emerging biomarkers for the molecular diagnostics of diseases, but their clinical use has been hindered by the lack of sensitive detection assays. Herein, we report the development of a sensitive nucleic acid detection assay named SPOT (sensitive loop-initiated DNAzyme biosensor for nucleic acid detection) by rationally designing a catalytic DNAzyme of endonuclease capability into a unified one-stranded allosteric biosensor. SPOT is activated once a nucleic acid target of a specific sequence binds to its allosteric module to enable continuous cleavage of molecular reporters. SPOT provides a highly robust platform for sensitive, convenient and cost-effective detection of low-abundance nucleic acids. For clinical validation, we demonstrated that SPOT could detect serum miRNAs for the diagnostics of breast cancer, gastric cancer and prostate cancer. Furthermore, SPOT exhibits potent detection performance over SARS-CoV-2 RNA from clinical swabs with high sensitivity and specificity. Finally, SPOT is compatible with point-of-care testing modalities such as lateral flow assays. Hence, we envision that SPOT may serve as a robust assay for the sensitive detection of a variety of nucleic acid targets enabling molecular diagnostics in clinics.

A signal transmission strategy driven by gap-regulated exonuclease hydrolysis for hierarchical molecular networks

Exonucleases serve as efficient tools for signal processing and play an important role in biochemical reactions. Here, we identify the mechanism of cooperative exonuclease hydrolysis, offering a method to regulate the cooperative hydrolysis driven by exonucleases through the modulation of the number of bases in gap region. A signal transmission strategy capable of producing amplified orthogonal DNA signal is proposed to resolve the polarity of signals and byproducts, which provides a solution to overcome the signal attenuation. The gap-regulated mechanism combined with DNA strand displacement (DSD) reduces the unpredictable secondary structures, allowing for the coexistence of similar structures in hierarchical molecular networks. For the application of the strategy, a molecular computing model is constructed to solve the maximum weight clique problems (MWCP). This work enhances for our knowledge of these important enzymes and promises application prospects in molecular computing, signal detection, and nanomachines.

CRISPR/Cas systems combined with DNA nanostructures for biomedical applications

DNA nanostructures are easy to design and construct, have good biocompatibility, and show great potential in biosensing and drug delivery. Numerous distinctive and versatile DNA nanostructures have been developed and explored for biomedical applications. In addition to DNA nanostructures that are completely assembled from DNA, composite DNA nanostructures obtained by combining DNA with other organic or inorganic materials are also widely used in related research. The CRISPR/Cas system has attracted great attention as a powerful gene editing technology and is also widely used in biomedical diagnosis. Many researchers are committed to exploring new possibilities by combining DNA nanostructures with CRISPR/Cas systems. These explorations provide support for the development of new detection methods and cargo delivery pathways, provide inspiration for improving relevant gene editing platforms, and further expand the application scope of DNA nanostructures and CRISPR/Cas systems. This paper mainly reviews the design principles and biomedical applications of CRISPR/Cas combined with DNA nanostructures based on the types of DNA nanostructures. Finally, the application status, challenges and development prospects of CRISPR/Cas combined with DNA nanostructures in detection and delivery are summarized. It is expected that this review will enable researchers to better understand the current state of the field and provide insights into the application of CRISPR/Cas systems and the development of DNA nanostructures.

Photoactivatable Engineering of CRISPR/Cas9-Inducible DNAzyme Probe for In Situ Imaging of Nuclear Zinc Ions

DNAzyme-based fluorescent probes for imaging metal ions in living cells have received much attention recently. However, employing in situ metal ions imaging within subcellular organelles, such as nucleus, remains a significant challenge. We developed a three-stranded DNAzyme probe (TSDP) that contained a 20-base-pair (20-bp) recognition site of a CRISPR/Cas9, which blocks the DNAzyme activity. When Cas9, with its specialized nuclear localization function, forms an active complex with sgRNA within the cell nucleus, it cleaves the TSDP at the recognition site, resulting in the in situ formation of catalytic DNAzyme structure. With this design, the CRISPR/Cas9-inducible imaging of nuclear Zn2+ is demonstrated in living cells. Moreover, the superiority of CRISPR-DNAzyme for spatiotemporal control imaging was demonstrated by integrating it with photoactivation strategy and Boolean logic gate for dynamic monitoring nuclear Zn2+ in both HeLa cells and mice. Collectively, this conceptual design expands the DNAzyme toolbox for visualizing nuclear metal ions and thus provides new analytical methods for nuclear metal-associated biology.

Target-Responsive DNA Nanoclaw for the On-Site Identification of Chinese Medicines with Naked Eye

The identification of Chinese medicinal herbs occupies a crucial part in the development of the food and drug market. Although molecular identification based on real-time PCR offers good versatility and uniform digital standards compared with traditional methods, such as morphology, the dependence on large-scale equipment hinders spot detection and marketable applications. In this study, we developed a DNA nanoclaw for colorimetric detection and visible on-site identification of Chinese medicines. When specific miRNA is present, the DNAzyme is activated and cleaves the substrate strand, triggering the catalytic hairpin assembly (CHA) reaction and forming branched DNA junctions on AuNP-I. This can then capture AuNP-II through hybridization and facilitate their aggregation, resulting in a noticeable color change that is observable to the naked eye. By harnessing the dual amplification of DNAzyme and CHA, this highly sensitive nanoprobe successfully achieved specific identification of Chinese medicines. This offers a new perspective for on-site testing in the herbal market.

Electrochemiluminescence Analysis of Multiple Glycans on Single Living Cell with a Closed Bipolar Electrode Array Chip

The profiling of multiple glycans on a single cell is important for elucidating glycosylation mechanisms and accurately identifying disease states. Herein, we developed a closed bipolar electrode (BPE) array chip for live single-cell trapping and in situ galactose and sialic acid detection with the electrochemiluminescence (ECL) method. Methylene blue-DNA (MB-DNA) as well as biotin-DNA (Bio-DNA) codecorated AuNPs were prepared as nanoprobes, which were selectively labeled on the cell surface through chemoselective labeling techniques. The individual cell was captured and labeled in the microtrap of the cathodic chamber, under an appropriate potential, MB molecules on the cellular membrane underwent oxidation, triggering the reduction of [Ru(bpy)3]2+/TPA and consequently generating ECL signals in the anodic chamber. The abundance of MB groups on the single cell enabled selective monitoring of both sialic acid and galactosyl groups with high sensitivity using ECL. The sialic acid and galactosyl content per HepG2 cell were detected to be 0.66 and 0.82 fmol, respectively. Through comprehensive evaluation of these two types of glycans on a single cell, tumor cells, and normal cells could be effectively discriminated and the accuracy of single-cell heterogeneous analysis was improved. Additionally, dynamic monitoring of variations in galactosyl groups on the surface of the single cell was also achieved. This work introduced a straightforward and convenient approach for heterogeneity analysis among single cells.

AND Logic Gate-Regulated DNAzyme Nanoflower for Monitoring the Activity of Multiple DNA Repair Enzymes

Despite the progress that has been made in diverse DNA-based nanodevices to in situ monitor the activity of the DNA repair enzymes in living cells, the significance of improving both the sensitivity and specificity has remained largely neglected and understudied. Herein, we propose a regulatable DNA nanodevice to specifically monitor the activity of DNA repair enzymes for early evaluation of cancer mediated by genomic instability. Concretely, an AND logic gate-regulated DNAzyme nanoflower was rationally designed by the self-assembly of the DNA duplex modified with both apurinic/apyrimidinic (AP) site and methyl lesion site. The DNAzyme nanoflower could be reconfigured under the repair of AP sites and O6-methylguanine sites by apurinic/apyrimidinic endonuclease 1 (APE1) and O6-methylguanine methyltransferase (MGMT) to produce a fluorescent signal, realizing the sensitive monitoring of the activity of APE1 and MGMT. Compared to the free DNAzyme duplex, the fluorescent response of the DNAzyme nanoflower increased by 60%, due to the effective enrichment of the DNA probes by the nanoflower structure. More importantly, we have demonstrated that the dual-enzyme activated strategy allows imaging of specific cancer cells in the AND logic gate manner using MCF-7 as a cancer cell model, improving the specificity of cancer cell imaging. This AND logic gate-regulated multifunctional DNAzyme nanoflower provides a simple tool for simultaneously visualizing multiple DNA repair enzymes, holding great potential in early clinical diagnosis and drug discovery.

Single Multifunctional Nanocabinets-Based Target-Activated Feedback for Simultaneously Precise Monitoring and Therapy

Stimulus-responsive mode is highly desirable for improving the precise monitoring and physiological efficacy of endogenous biomarkers (EB). However, its integrated application for visual detection and therapy is limited by inappropriate use of responsive triggers and poor delivery of EB signal-transducing agents, which remain challenging in simultaneous monitoring and noninvasive therapy of EB and EB-mediated pathological events. Target microRNA (miRNA) as controllable reaction triggers and DNAzyme as signal-transducing agent are proposed to develop target-stimulated multifunctional nanocabinets (MFNCs) for the visual tracking of both miRNA and miRNA-mediated anticancer events. The MFNCs, equipped with a target-discriminating sequence-incorporated DNAzyme motif, can specifically release therapeutic molecules through target-triggered conformational switches, accompanied by transduction signal output. Target detection and molecule release performance are recorded in parallel via reverse dual-signal feedback at the single-molecule level. In addition, the intrinsic thermal-replenishing of the MFNCs leads to tumor ablation without invasive exogenous aids. The system achieves visual target quantification, anticancer molecule real-time tracking, and tumor suppression in vivo and in vitro. This work proposes a new paradigm for precise visual exploration of EB or EB-mediated bio-events and provides a demonstration of efficacious all-in-one detection and therapy based on the target-triggered multifunctional nanosystem.

DNA nanotechnology-based nucleic acid delivery systems for bioimaging and disease treatment

Nucleic acids, including DNA and RNA, have been considered as powerful and functional biomaterials owing to their programmable structure, good biocompatibility, and ease of synthesis. However, traditional nucleic acid-based probes have always suffered from inherent limitations, including restricted cell internalization efficiency and structural instability. In recent years, DNA nanotechnology has shown great promise for the applications of bioimaging and drug delivery. The attractive superiorities of DNA nanostructures, such as precise geometries, spatial addressability, and improved biostability, have enabled them to be a novel category of nucleic acid delivery systems for biomedical applications. In this review, we introduce the development of DNA nanotechnology, and highlight recent advances of DNA nanostructure-based delivery systems for cellular imaging and therapeutic applications. Finally, we propose the challenges as well as opportunities for the future development of DNA nanotechnology in biomedical research.

Lighting up Lipidic Nanoflares with Self-Powered and Multivalent 3D DNA Rolling Motors for High-Efficiency MicroRNA Sensing in Serum and Living Cells

Intelligent DNA nanomachines are powerful and versatile molecular tools for bioimaging and biodiagnostic applications; however, they are generally constrained by complicated synthetic processes and poor reaction efficiencies. In this study, we developed a simple and efficient molecular machine by coupling a self-powered rolling motor with a lipidic nanoflare (termed RMNF), enabling high-contrast, robust, and rapid probing of cancer-associated microRNA (miRNA) in serum and living cells. The lipidic nanoflare is a cholesterol-based lipidic micelle decorated with hairpin-shaped tracks that can be facilely synthesized by stirring in buffered solution, whereas the 3D rolling motor (3D RM) is a rigidified tetrahedral DNA scaffold equipped with four single-stranded "legs" each silenced by a locking strand. Once exposed to the target miRNA, the 3D RM can be activated, followed by self-powered precession based on catalyzed hairpin assembly (CHA) and lighting up of the lipidic nanoflare. Notably, the multivalent 3D RM that moves using four DNA legs, which allows the motor to continuously and acceleratedly interreact with DNA tracks rather than dissociate from the surface of the nanoflare, yielded a limit of detection (LOD) of 500 fM at 37 °C within 1.5 h. Through the nick-hidden and rigidified structure design, RMNF exhibits high biostability and a low false-positive signal under complex physiological settings. The final application of RMNF for miRNA detection in clinical samples and living cells demonstrates its considerable potential for biomedical imaging and clinical diagnosis.

Label-free SERS detection of apolipoprotein A4 based on DNAzyme-driven molecular machine

Apolipoprotein A4 has a wide range of synaptic toxicity and can be used as a reliable molecular biomarker for the detection of depressive disorder. It has certain clinical requirements for simple, rapid and selective detection of apolipoprotein A4. Here, based on the DNA biped walker driven by DNAzyme, we designed a label-free surface-enhanced Raman scatting sensor for rapid detection of apolipoprotein A4. Compared with the typical DNA walker, the biped DNA walker has the advantages of large walking range and high magnification efficiency. The magnesium-dependent DNAzyme drives the DNA walker, which can cut the MBs sequentially. The resulting MBs fragments were then hybridized with AuNPs modified by repetitive adenine to make Au NPs proliferate on the substrate surface, resulting in a large number of cycles. Using 736 cm-1 adenine as the internal marker, surface enhanced Raman scattering analysis showed that the linear detection range of human apolipoprotein A4 was 10∼1000 ng mL-1, the detection limit was 4.7 pg/mL, and it had significant specificity, which could meet the needs of clinical detection and showed great application potential.

Recent Development of Copper-Based Nanozymes for Biomedical Applications

Copper (Cu), an indispensable trace element within the human body, serving as an intrinsic constituent of numerous natural enzymes, carrying out vital biological functions. Furthermore, nanomaterials exhibiting enzyme-mimicking properties, commonly known as nanozymes, possess distinct advantages over their natural enzyme counterparts, including cost-effectiveness, enhanced stability, and adjustable performance. These advantageous attributes have captivated the attention of researchers, inspiring them to devise various Cu-based nanomaterials, such as copper oxide, Cu metal-organic framework, and CuS, and explore their potential in enzymatic catalysis. This comprehensive review encapsulates the most recent advancements in Cu-based nanozymes, illuminating their applications in the realm of biochemistry. Initially, it is delved into the emulation of typical enzyme types achieved by Cu-based nanomaterials. Subsequently, the latest breakthroughs concerning Cu-based nanozymes in biochemical sensing, bacterial inhibition, cancer therapy, and neurodegenerative diseases treatment is discussed. Within this segment, it is also explored the modulation of Cu-based nanozyme activity. Finally, a visionary outlook for the future development of Cu-based nanozymes is presented.

Engineering of a Self-Regulatory Bidirectional DNA Assembly Circuit for Amplified MicroRNA Imaging

The engineering of catalytic hybridization DNA circuits represents versatile ways to orchestrate a complex flux of molecular information at the nanoscale, with potential applications in DNA-encoded biosensing, drug discovery, and therapeutics. However, the diffusive escape of intermediates and unintentional binding interactions remain an unsolved challenge. Herein, we developed a compact, yet efficient, self-regulatory assembly circuit (SAC) for achieving robust microRNA (miRNA) imaging in live cells through DNA-templated guaranteed catalytic hybridization. By integrating the toehold strand with a preblocked palindromic fragment in the stem domain, the proposed miniature SAC system allows the reactant-to-template-controlled proximal hybridization, thus facilitating the bidirectional-sustained assembly and the localization-intensified signal amplification without undesired crosstalk. With condensed components and low reactant complexity, the SAC amplifier realized high-contrast intracellular miRNA imaging. We anticipate that this simple and template-controlled design can enrich the clinical diagnosis and prognosis toolbox.

A NIR Programmable In Vivo miRNA Magnifier for NIR-II Imaging of Early Stage Cancer

Aberrant expressions of biomolecules occur much earlier than tumor visualized size and morphology change, but their common measurement strategies such as biopsy suffer from invasive sampling process. In vivo imaging of slight biomolecule expression difference is urgently needed for early cancer detection. Fluorescence of rare earth nanoparticles (RENPs) in second near-infrared (NIR-II) region makes them appropriate tool for in vivo imaging. However, the incapacity to couple with signal amplification strategies, especially programmable signal amplification strategies, limited their application in lowly expressed biomarkers imaging. Here we develop a 980/808 nm NIR programmed in vivo microRNAs (miRNAs) magnifier by conjugating activatable DNAzyme walker set to RENPs, which achieves more effective NIR-II imaging of early stage tumor than size monitoring imaging technique. Dye FD1080 (FD1080) modified substrate DNA quenches NIR-II downconversion emission of RENPs under 808 nm excitation. The miRNA recognition region in DNAzyme walker is sealed by a photo-cleavable strand to avoid "false positive" signal in systemic circulation. Upconversion emission of RENPs under 980 nm irradiation activates DNAzyme walker for miRNA recognition and amplifies NIR-II fluorescence recovery of RENPs via DNAzyme catalytic reaction to achieve in vivo miRNA imaging. This strategy demonstrates good application potential in the field of early cancer detection.

Simultaneous Proximity DNAzyme-Activated Duplexed Protein-Specific Glycosylation Imaging on Cell Surface via Bioorthogonal Chemistry

Due to the scarcity of strategies to evaluate the multiple subtype monosaccharides in one specific protein simultaneously within a single assay, understanding the glycosylation mechanisms and revealing their roles in disease development become extremely challenging. Herein, a strategy of proximity DNAzyme-activated fluorescence imaging of multiplex saccharides in a protein on the cell surface via bio-orthogonal chemistry is reported. The multichannel proximity DNAzyme-activated fluorescence recovery enabled the highly selective and effective imaging analysis of multiplexed protein-specific glycosylation in situ and has been demonstrated. This strategy is successfully applied to visualize the sialylation and fucosylation in four specific proteins on different cell lines and evaluate the variations of protein-specific glycosylation in response to the alterations of the cellular physiological status. More importantly, the quantitative tracking of the terminal sialyation and fucosylation changes at the single-protein level is realized by assigning the target protein as the native reference, which has the potential to be a versatile platform for glycobiology research and clinical diagnosis.

Construction of a Near-Infrared Photoswitched Nanomachine Powered by an Endogenous Trigger for Activatable Imaging of Intracellular MicroRNA and Amplified Photodynamic Therapy for Cancer Cells

DNA nanomachines could initiate the cascade reaction in an autonomous mode under the drive of triggers, which achieve the signal amplification for the bioimaging of intracellular biomarkers. Compared with the "always-on" nanomachine that possibly produces false-positive signals, a controllable nanomachine with the on-site activation could be better for accurate tumor imaging and precise tumor therapy. Till now, the endogenous and exogenous triggers have been developed to design the controllable nanosensors. However, their combinations to develop feasible DNA nanomachines have been rarely studied. Herein, we constructed a near-infrared (NIR)-light-controlled DNA nanomachine that was first activated by the NIR light and then induced a target-triggered amplification process under the drive of an endogenous stimulus. Owing to adenosine-5'-triphosphate (ATP) having much higher concentration in cancer cells than that in healthy cells and the extracellular fluid, the obtained DNA nanomachine was selectively activated in cancer cells with inhibited interference signals from the surrounding healthy tissues. With obvious advantages including the exogenous NIR light initiation, the selective activation by the target microRNA, and the sensitive acceleration by the ATP-induced strand recycling reaction, the constructed nanomachine could be used to image the intracellular microRNA with increased sensitivity. Besides, after modifying the DNA sequence with the photosensitizer molecules, the obtained nanomachine could perform the selective photodynamic therapy on the tumor sections with the outstandingly decreased side effects. Thus, we hope the designed nanomachine could provide some important hints to design feasible nanomachines for accurate tumor diagnosis and precise tumor therapy.

Sensitive detection of microRNA by dynamic light scattering based on DNAzyme walker-mediated AuNPs self-assembly

As an important biomarker, microRNAs (miRNAs) play an important role in gene expression, and their detection has attracted increasing attention. In this study, a DNAzyme walker that could provide power to perform autonomous movement was designed. Based on the continuous mechanical motion characteristics of DNAzyme walker, a miRNA detection strategy for the self-assembly of AuNPs induced by the hairpin probe-guided DNAzyme walker "enzyme cleavage and walk" was established. In this strategy, DNAzyme walker continuously cleaved and walked on the hairpin probe on the surface of AuNPs to induce the continuous shedding of some segments of the hairpin probe. The remaining hairpin sequences on the surface of the AuNP pair with each other, causing the nanoparticles to self-assemble. This strategy uses the autonomous movement mechanism of DNAzyme walker to improve reaction efficiency and avoid the problem of using expensive and easily degradable proteases. Secondly, using dynamic light scattering technology as the signal output system, ultra-sensitive detection with a detection limit of 3.6 fM is achieved. In addition, this strategy has been successfully used to analyze target miRNAs in cancer cell samples.

An autocatalytic multicomponent DNAzyme nanomachine for tumor-specific photothermal therapy sensitization in pancreatic cancer

Multicomponent deoxyribozymes (MNAzymes) have great potential in gene therapy, but their ability to recognize disease tissue and further achieve synergistic gene regulation has rarely been studied. Herein, Arginylglycylaspartic acid (RGD)-modified Distearyl acylphosphatidyl ethanolamine (DSPE)-polyethylene glycol (PEG) (DSPE-PEG-RGD) micelle is prepared with a DSPE hydrophobic core to load the photothermal therapy (PTT) dye IR780 and the calcium efflux pump inhibitor curcumin. Then, the MNAzyme is distributed into the hydrophilic PEG layer and sealed with calcium phosphate through biomineralization. Moreover, RGD is attached to the outer tail of PEG for tumor targeting. The constructed nanomachine can release MNAzyme and the cofactor Ca2+ under acidic conditions and self-assemble into an active mode to cleave heat shock protein (HSP) mRNA by consuming the oncogene miRNA-21. Silencing miRNA-21 enhances the expression of the tumor suppressor gene PTEN, leading to PTT sensitization. Meanwhile, curcumin maintains high intracellular Ca2+ to further suppress HSP-chaperone ATP by disrupting mitochondrial Ca2+ homeostasis. Therefore, pancreatic cancer is triple-sensitized to IR780-mediated PTT. The in vitro and in vivo results show that the MNAzyme-based nanomachine can strongly regulate HSP and PTEN expression and lead to significant pancreatic tumor inhibition under laser irradiation.

Tunable metal-organic frameworks assist in catalyzing DNAzymes with amplification platforms for biomedical applications

Various binding modes of tunable metal organic frameworks (MOFs) and functional DNAzymes (Dzs) synergistically catalyze the emergence of abundant functional nanoplatforms. Given their serial variability in formation, structural designability, and functional controllability, Dzs@MOFs tend to be excellent building blocks for the precise "intelligent" manufacture of functional materials. To present a clear outline of this new field, this review systematically summarizes the progress of Dz integration into MOFs (MOFs@Dzs) through different methods, including various surface infiltration, pore encapsulation, covalent binding, and biomimetic mineralization methods. Atomic-level and time-resolved catalytic mechanisms for biosensing and imaging are made possible by the complex interplay of the distinct molecular structure of Dzs@MOF, conformational flexibility, and dynamic regulation of metal ions. Exploiting the precision of DNAzymes, MOFs@Dzs constructed a combined nanotherapy platform to guide intracellular drug synthesis, photodynamic therapy, catalytic therapy, and immunotherapy to enhance gene therapy in different ways, solving the problems of intracellular delivery inefficiency and insufficient supply of cofactors. MOFs@Dzs nanostructures have become excellent candidates for biosensing, bioimaging, amplification delivery, and targeted cancer gene therapy while emphasizing major advancements and seminal endeavors in the fields of biosensing (nucleic acid, protein, enzyme activity, small molecules, and cancer cells), biological imaging, and targeted cancer gene delivery and gene therapy. Overall, based on the results demonstrated to date, we discuss the challenges that the emerging MOFs@Dzs might encounter in practical future applications and briefly look forward to their bright prospects in other fields.

A Spatially Programmable DNA Nanorobot Arm to Modulate Anisotropic Gold Nanoparticle Assembly by Enzymatic Excision

Programmable assembly of gold nanoparticle superstructures with precise spatial arrangement has drawn much attention for their unique characteristics in plasmonics and biomedicine. Bio-inspired methods have already provided programmable, molecular approaches to direct AuNP assemblies using biopolymers. The existing methods, however, predominantly use DNA as scaffolds to directly guide the AuNP interactions to produce intended superstructures. New paradigms for regulating AuNP assembly will greatly enrich the toolbox for DNA-directed AuNP manipulation and fabrication. Here, we developed a strategy of using a spatially programmable enzymatic nanorobot arm to modulate anisotropic DNA surface modifications and assembly of AuNPs. Through spatial controls of the proximity of the reactants, the locations of the modifications were precisely regulated. We demonstrated the control of the modifications on a single 15 nm AuNP, as well as on a rectangular DNA origami platform, to direct unique anisotropic AuNP assemblies. This method adds an alternative enzymatic manipulation to DNA-directed AuNP superstructure assembly.

Development of a DNAzyme Walker for the Detection of APE1 in Living Cancer Cells

DNAzyme walker technology is a compelling option for bioanalytical and drug delivery applications. While nucleic acid and protein targets have been used to activate DNAzyme walkers, investigations into enzyme-triggered DNAzyme walkers in living cells are still in their early stages. The base excision repair (BER) pathway presents an array of enzymes that are overexpressed in cancer cells. Here, we introduce a DNAzyme walker system that sensitively and specifically detects the BER enzyme apurinic/apyrimidinic endodeoxyribonuclease 1 (APE1). We constructed the DNAzyme walker on the surface of 20 nm-diameter gold nanoparticles. We achieved a detection limit of 160 fM of APE1 in a buffer and in whole cell lysate equivalent to the amount of APE1 in a single HeLa cell in a sample volume of 100 μL. Confocal imaging of the DNAzyme walking reveals a cytoplasmic distribution of APE1 in HeLa cells. Walking activity is tunable to exogenous Mn2+ concentrations and the uptake of the DNAzyme walker system does not require transfection assistance. We demonstrate the investigative potential of the DNAzyme walker for up-regulated or overactive enzyme biomarkers of the BER pathway in cancer cells.

Endogenous Enzyme-Powered DNA Nanomotor Operating in Living Cells for microRNA Imaging

Accurate and specific imaging of low-abundance microRNA (miRNA) in living cells is extremely important for disease diagnosis and monitoring of disease progression. DNA nanomotors have shown great potential for imaging molecules of interest in living cells. However, inappropriate driving forces and complex design and operation procedures have hindered their further application. Here, we proposed an endogenous enzyme-powered DNA nanomotor (EEPDN), which employs an endogenous APE1 enzyme as fuel to execute repetitive cycles of motion for miRNA imaging in living cells. The whole motor system is constructed based on gold nanoparticles without other auxiliary additives. Due to the high efficiency of APE1, this EEPDN system has achieved highly sensitive miRNA imaging in living cells within 1.5 h. This strategy was also successfully used to differentiate the expression of specific miRNA between tumor cells and normal cells, demonstrating a high tumor cell selectivity. This strategy can promote the development of novel nanomotors and is expected to be a perfect intracellular molecular imaging tool for biological and medical applications.

3D DNAzyme walker based electrochemical biosensor for attomolar level microRNA-155 detection

Herein, an ultrasensitive electrochemical biosensor for microRNA-155 (miR-155) detection based on the powerful catalytic and continuous walking signal amplification capability of 3D DNAzyme walker and the gold nanoparticles/graphene aerogels carbon fiber paper-based (AuNPs/GAs/CFP) flexible sensing electrode with excellent electrochemical performance was successfully constructed. In a proof-of-concept experiment, in the presence of miR-155, the DNAzyme strands anchored on the streptavidin-modified magnetic beads (MBs) silenced by locked strands can be activated, thus generating the walking arm of the 3D DNAzyme walker. Meanwhile, the substrate strands modified with Fe-MOF-NH2 nanoparticles were evenly distributed on the surface of MBs and served as tracks of the 3D DNAzyme walker. Once the DNAzyme strand was activated, the catalytic site in the substrate strand can be cleaved in the presence of Mn2+, and a large number of stumps modified with Fe-MOF-NH2 nanoparticles (output@Fe-MOF-NH2) will be generated during the continuous and efficient walking cleavage of the DNAzyme walker, driving the recognition-catalysis-release cycle process for signal amplification. Immediately afterwards, the signal was read out through the base complementary pairing of capture probe (PS) immobilized on the surface of the paper-based flexible sensing electrode AuNPs/GAs/CFP and signal probes output@Fe-MOF-NH2, thus achieving the quantitative detection of miR-155. Under optimal experimental conditions, the designed 3D DNAzyme walker-based biosensor exhibited a relatively lower limit of detection (LOD) of 56.23 aM, with a linear range of 100 aM to 100 nM. Overall, the proposed 3D DNAzyme walker biosensor exhibited good interference and reproducibility, demonstrating a promising future in the field of clinical disease diagnosis.

Self-accelerated DNA walker mediated electrochemical biosensor for rapid and ultrasensitive detection of microRNA

Herein, we developed a novel three-dimensional (3D) self-accelerated DNA walker (SADW) which progressively expedite walking rate by unlocking the more walking arm continuously in walker process to construct electrochemical biosensor for ultrasensitive detection of microRNA. Particularly, we skillfully introduced a target analogue sequence in the double-loop hairpin, which could be released in the walking process of SADW, then rapidly activating more silenced walking strands to achieve the continuous self-acceleration, resulting in the expedited reaction rate. Surprisingly, the average reaction rate of SADW was quite higher than that of traditional 3D self-circulating DNA walkers (DW) under pretty low target miRNA concentration, which is ascribed to the outstanding acceleration process of the SADW, readily conquering the major predicaments of DW in detecting target with traces concentration: slow reaction rate and low sensitivity. This way, the elaborated SADW is favorably applied in the ultrasensitive and rapid detection of miRNA-21 in tumor cancer cell lysates with a detection limit down to 5.81 aM which was far from lower than the detection limit of DW. This approach develops the novel generation of widespread strategy for the applications in clinic diagnose, biosensing assay, and DNA nanobiotechnology.

Smartphone-Assisted Flexible Electrochemical Sensor Platform by a Homology DNA Nanomanager Tailored for Multiple Cancer Markers Field Inspection

In this work, an ingenious sensor technology was established by integrating the EBFCs on a flexible paper strip carrier (PE) that was used for simultaneous detection of tumor markers in complex samples. Adopting high performance ultrathin graphdiyne (U-GDY) as the substrate can increase the enzyme load, accelerate the electron transfer rate, and significantly enhance the detection sensitivity. A homologous DNA nanomanager strategy cleverly uses signal switches to recycle and amplify target miRNAs, while the smartphone receives real-time instantaneous current values to realize multivariate detection. Electrochemical data show that the detection limits (LODs) of miRNA-21 and miRNA-155 are 0.09 and 0.15 fM in the wide concentration range. The results confirm that the tailored sensor platform provides a strategy for the early cancer diagnosis and lays the foundation for the construction of a flexible wearable platform.

RNA-Cleaving DNAzyme-Based Amplification Strategies for Biosensing and Therapy

Since their first discovery in 1994, DNAzymes have been extensively applied in biosensing and therapy that act as recognition elements and signal generators with the outstanding properties of good stability, simple synthesis, and high sensitivity. One subset, RNA-cleaving DNAzymes, is widely employed for diverse applications, including as reporters capable of transmitting detectable signals. In this review, the recent advances of RNA-cleaving DNAzyme-based amplification strategies in scaled-up biosensing are focused, the application in diagnosis and disease treatment are also discussed. Two major types of RNA-cleaving DNAzyme-based amplification strategies are highlighted, namely direct response amplification strategies and combinational response amplification strategies. The direct response amplification strategies refer to those based on novel designed single-stranded DNAzyme, and the combinational response amplification strategies mainly include two-part assembled DNAzyme, cascade reactions, CHA/HCR/RCA, DNA walker, CRISPR-Cas12a and aptamer. Finally, the current status of DNAzymes, the challenges, and the prospects of DNAzyme-based biosensors are presented.

Simultaneous detection and imaging of two specific miRNAs using DNA tetrahedron-based catalytic hairpin assembly

Improving the accuracy, sensitivity and speed of intracellular miRNA imaging is essential for early diagnosis of cancer. To achieve this goal, we herein present a strategy for imaging two distinct miRNAs by DNA tetrahedron-based catalytic hairpin assembly (DCHA). Two nanoprobes, DTH-13 and DTH-24, were prepared by one-pot synthesis. The resultant structures were DNA tetrahedrons functionalized with two sets of CHA hairpins, which respectively responded to miR-21 and miR-155. Using these structured DNA nanoparticles as the carriers, the probes could easily enter living cells. The presence of miR-21 or miR-155 could trigger CHA between DTH-13 and DTH-24, leading to independent fluorescence signals of FAM and Cy3. In this system, the sensitivity and kinetics were significantly enhanced owing to the strategy of DCHA. The sensing performance of our method was thoroughly investigated in buffers, fetal bovine serum (FBS) solutions, living cells, and clinical tissue samples. The results validated the potential of DTH nanoprobes as a diagnostic tool for early stages of cancer.

NIR-II Responsive Nanohybrids Incorporating Thermosensitive Hydrogel as Sprayable Dressing for Multidrug-Resistant-Bacteria Infected Wound Management

Developing an effective dressing against bacterial infection and synchronously addressing wound complications, such as bleeding, long-term inflammation, and reinfection, are highly desirable in clinical practice. In this work, a second near-infrared (NIR-II) responsive nanohybrid consisting of imipenem encapsulated liposome with gold-shell and lipopolysaccharide (LPS)-targeting aptamer, namely ILGA, is constructed for bacteria elimination. Benefiting from the delicate structure, ILGA exhibits strong affinity and a reliable photothermal/antibiotic therapeutic effect toward multidrug-resistant Pseudomonas aeruginosa (MDR-PA). Furthermore, by incorporating ILGA with a thermosensitive hydrogel poly(lactic-co-glycolic acid)-polyethylene glycol-poly(lactic-co-glycolic acid) (PLGA-PEG-PLGA), a sprayable dressing ILGA@Gel was prepared, which enables a quick on-demand gelation (10 s) for wound hemostasis and offers excellent photothermal/antibiotic efficacy to sterilize the infected wound. Additionally, ILGA@Gel provides satisfactory wound-healing environments by reeducating wound-associated macrophages for inflammation alleviation and forming a gel layer to block exogenous bacterial reinfection. This biomimetic hydrogel reveals excellent bacteria eradication and wound recovery effectiveness, demonstrating its promising potential for managing complicated infected wounds.

Enzyme-Triggered DNA Sensor Technology for Spatially-Controlled, Cell-Selective Molecular Imaging

ConspectusWith unparalleled programmability, DNA has evolved as a powerful scaffold for engineering intricate and dynamic systems that can perform diverse tasks. By allowing serial detection of molecular targets in complex cellular milieus, increasingly sophisticated DNA sensors have not only promoted significant advances in unveiling the fundamental mechanisms of various pathophysiological processes but also provided a useful toolkit for disease diagnostics based on molecular signatures. Despite much progress, an inherent limitation of DNA-based sensors is that they often lack spatial control and cell-type selectivity for the sensing activity because of their "always active" design mechanism. Since most molecular targets of interests are not exclusive to disease cells, they are also shared by normal cells, the application of such biosensors for disease-specific imaging is limited by inadequate signal-to-background ratios due to indistinguishable signal response in both disease and normal cells. Therefore, imparting biosensors with spatial controllability remains a key issue to achieve molecular imaging with high sensitivity and cell specificity.As a biocatalyst, enzyme has been found to be closely related with the pathological conditions of numerous diseases. For example, many nucleases, protease, and kinases have been identified overexpressed in disease cells and considered as important biomarkers of cancer, inflammation, and neurological diseases. Recently, we have envisioned that such pathophysiology-associated enzymes could be leveraged as endogenous triggers to achieve spatial control over the molecular imaging activity of the DNA-based sensors with improved cell-specificity. In this Account, we outline the research efforts from our group on the development of endogenous enzyme-triggered, DNA-based sensor technology that enables spatially controlled, cell-type selective molecular imaging. With programmable DNA design and further engineering of enzymatically cleavable sites, a series of DNAzyme- and aptamer-based sensors have been developed for enzyme-controlled imaging of various molecular targets (e.g., metal ions and small molecules) in a cancer cell-selective manner. In particular, by introduction of PNA as bridge molecules to engineer DNA-based sensors with functional peptides, the conceptual design of protease-activated DNA biosensors has been established for spatioselective molecular imaging in cancer cells and extracellular tumor microenvironments. Furthermore, enzyme-triggered signal amplification approaches, such as enzymatically activated molecular beacon and catalytic hairpin assembly, have been developed for spatially selective RNA imaging in specific disease cells (e.g., inflammatory cells and cancer cells), which enables enhanced disease-site specificity and thus improved signal-to-background ratio. The signal amplification strategy is further expanded to cell-selective amplified imaging of non-RNA species through the combination with functional DNA design. Finally, the challenges and potential future directions in this burgeoning field are discussed. We hope this Account offers insights into rational design of enzymatically controlled, DNA-based sensor platforms for opening new frontiers in spatially resolved, cell-selective molecular imaging. We believe that the continuing advances in DNA-based molecular sensing technology together with the discoveries of diverse disease-associated enzymes will promise to usher a new era of diagnosis.

Rational Design of Cascade DNA System for Signal Amplification

System leakage critically confines the development of cascade DNA systems that need to be implemented in a strict order-by-order manner. In principle, ternary DNA reactants, composed of three single-strand DNA (ssDNA) with a strict equimolar ratio (1:1:1), have been indispensable for successfully cascading upstream entropy-driven DNA circuit (EDC) with downstream circuits, and system leakage will occur with any unbalance of the molar ratio. In this work, we proposed "splitting-reconstruction" and "protection-release" strategies on the potential downstream circuit initiator derived from upstream EDC to guide the construction of EDC-involved cascade systems independent of system leakage derived from unpurified reactants. Both the reconstructed and released downstream circuit initiators were in compliance with the principle of the cascade AND logic gate. Using these two strategies, two cascade systems─EDC2-4WJ-TMSDR and EDC3-HCR─were developed to carry out the designed order, which did not require that the ratio of 1:1:1 be maintained. Furthermore, the inherent property of the upstream EDC could transfer into the downstream circuit, endowing the developed cascade systems with a more powerful signal amplification ability for the sensitive detection of the corresponding initiator strand. These two strategies may provide new insights into the process of constructing EDC-like circuit-involved high-order DNA networks.