Trapping red blood cells in living animals using optical tweezers

Laser-induced microbubble as an in vivo valve for optofluidic manipulation in living Mice's microvessels

Optofluidic regulation of blood microflow in vivo represents a significant method for investigating illnesses linked to abnormal changes in blood circulation. Currently, non-invasive strategies are limited to regulation within capillaries of approximately 10 μm in diameter because the adaption to blood pressure levels in the order of several hundred pascals poses a significant challenge in larger microvessels. In this study, using laser-induced microbubble formation within microvessels of the mouse auricle, we regulate blood microflow in small vessels with diameters in the tens of micrometers. By controlling the laser power, we can control the growth and stability of microbubbles in vivo. This controlled approach enables the achievement of prolonged ischemia and subsequent reperfusion of blood flow, and it can also regulate the microbubbles to function as micro-pumps for reverse blood pumping. Furthermore, by controlling the microbubble, narrow microflow channels can be formed between the microbubbles and microvessels for assessing the apparent viscosity of leukocytes, which is 76.9 ± 11.8 Pa·s in the in vivo blood environment. The proposed design of in vivo microbubble valves opens new avenues for constructing real-time blood regulation and exploring cellular mechanics within living organisms.

Deformable microlaser force sensing

Mechanical forces are key regulators of cellular behavior and function, affecting many fundamental biological processes such as cell migration, embryogenesis, immunological responses, and pathological states. Specialized force sensors and imaging techniques have been developed to quantify these otherwise invisible forces in single cells and in vivo. However, current techniques rely heavily on high-resolution microscopy and do not allow interrogation of optically dense tissue, reducing their application to 2D cell cultures and highly transparent biological tissue. Here, we introduce DEFORM, deformable microlaser force sensing, a spectroscopic technique that detects sub-nanonewton forces with unprecedented spatio-temporal resolution. DEFORM is based on the spectral analysis of laser emission from dye-doped oil microdroplets and uses the force-induced lifting of laser mode degeneracy in these droplets to detect nanometer deformations. Following validation by atomic force microscopy and development of a model that links changes in laser spectrum to applied force, DEFORM is used to measure forces in 3D and at depths of hundreds of microns within tumor spheroids and late-stage Drosophila larva. We furthermore show continuous force sensing with single-cell spatial and millisecond temporal resolution, thus paving the way for non-invasive studies of biomechanical forces in advanced stages of embryogenesis, tissue remodeling, and tumor invasion.

Programmable spin and transport of a living shrimp egg through photoacoustic pressure

In the fields of biomedicine and microfluidics, the non-contact capture, manipulation, and spin of micro-particles hold great importance. In this study, we propose a programmable non-contact manipulation technique that utilizes photoacoustic effect to spin and transport living shrimp eggs. By directing a modulated pulsed laser toward a liquid-covered stainless-steel membrane, we can excite patterned Lamb waves within the membrane. These Lamb waves occur at the interface between the membrane and the liquid, enabling the manipulation of nearby particles. Experimental results demonstrate the successful capture, spin, and transport of shrimp eggs in diameter of 220 µm over a distance of about 5 mm. Calculations indicate that the acoustic radiation force and torque generated by our photoacoustic manipulation system are more than 299.5 nN and 41.0 nN·mm, respectively. The system surpasses traditional optical tweezers in terms of force and traditional acoustic tweezers in terms of flexibility. Consequently, this non-contact manipulation system significantly expands the possibilities for applications in various fields, including embryo screening, cell manipulation, and microfluidics.

Programmable photoacoustic patterning of microparticles in air

Optical and acoustic tweezers, despite operating on different physical principles, offer non-contact manipulation of microscopic and mesoscopic objects, making them essential in fields like cell biology, medicine, and nanotechnology. The advantages and limitations of optical and acoustic manipulation complement each other, particularly in terms of trapping size, force intensity, and flexibility. We use photoacoustic effects to generate localized Lamb wave fields capable of mapping arbitrary laser pattern shapes. By using localized Lamb waves to vibrate the surface of the multilayer membrane, we can pattern tens of thousands of microscopic particles into the desired pattern simultaneously. Moreover, by quickly and successively adjusting the laser shape, microparticles flow dynamically along the corresponding elastic wave fields, creating a frame-by-frame animation. Our approach merges the programmable adaptability of optical tweezers with the potent manipulation capabilities of acoustic waves, paving the way for wave-based manipulation techniques, such as microparticle assembly, biological synthesis, and microsystems.

Precision isolation and cultivation of single cells by vortex and flat-top laser ejection

Single-cell isolation stands as a critical step in single-cell studies, and single-cell ejection technology based on laser induced forward transfer technology (LIFT) is considered one of the most promising methods in this regard for its ability of visible isolating single cell from complex samples. In this study, we improve the LIFT technology and introduce optical vortex laser-induced forward transfer (OV-LIFT) and flat-top laser-induced forward transfer (FT-LIFT) by utilizing spatial light modulator (SLM), aiming to enhance the precision of single-cell sorting and the cell's viability after ejection. Experimental results demonstrate that applying vortex and flat-top beams during the sorting and collection process enables precise retrieval of single cells within diameter ranges of 50 μm and 100 μm, respectively. The recovery rates of Saccharomyces cerevisiae and Escherichia coli DH5α single cell ejected by vortex beam are 89 and 78%, by flat-top beam are 85 and 57%. When employing Gaussian beam sorting, the receiving range extends to 400 μm, with cultivation success rates of S. cerevisiae and E. coli DH5α single cell are 48 and 19%, respectively. This marks the first application of different mode beams in the ejection and cultivation of single cells, providing a novel and effective approach for the precise isolation and improving the viability of single cells.

Tired and stressed: direct holographic quasi-static stretching of aging echinocytes and discocytes in plasma using optical tweezers [Invited]

Red blood cells (RBCs) undergo a progressive morphological transformation from smooth biconcave discocytes into rounder echinocytes with spicules on their surface during cold storage. The echinocytic morphology impacts RBCs' ability to flow through narrow sections of the circulation and therefore transfusion of RBC units with a high echinocytic content are thought to have a reduced efficiency. We use an optical tweezers-based technique where we directly trap and measure linear stiffness of RBCs under stress without the use of attached spherical probe particles or microfluidic flow to induce shear. We study RBC deformability with over 50 days of storage performing multiple stretches in blood plasma (serum with cold agglutinins removed to eliminate clotting). In particular, we find that discocytes and echinocytes do not show significant changes in linear stiffness in the small strain limit (∼ 20 % change in length) up to day 30 of the storage period, but do find differences between repeated stretches. By day 50 the linear stiffness of discocytes had increased to approximately that measured for echinocytes throughout the entire period of measurements. These changes in stiffness corresponded to recorded morphological changes in the discocytes as they underwent storage lesion. We believe our holographic trapping and direct measurement technique has applications to directly control and quantify forces that stretch other types of cells without the use of attached probes.

Cell-Based Micro/Nano-Robots for Biomedical Applications: A Review

Micro/nano-robots are powerful tools for biomedical applications and are applied in disease diagnosis, tumor imaging, drug delivery, and targeted therapy. Among the various types of micro-robots, cell-based micro-robots exhibit unique properties because of their different cell sources. In combination with various actuation methods, particularly externally propelled methods, cell-based microrobots have enormous potential for biomedical applications. This review introduces recent progress and applications of cell-based micro/nano-robots. Different actuation methods for micro/nano-robots are summarized, and cell-based micro-robots with different cell templates are introduced. Furthermore, the review focuses on the combination of cell-based micro/nano-robots with precise control using different external fields. Potential challenges, further prospects, and clinical translations are also discussed.

Deep learning-based size prediction for optical trapped nanoparticles and extracellular vesicles from limited bandwidth camera detection

Due to its ability to record position, intensity, and intensity distribution information, camera-based monitoring of nanoparticles in optical traps can enable multi-parametric morpho-optical characterization at the single-particle level. However, blurring due to the relatively long (10s of microsecond) integration times and aliasing from the resulting limited temporal bandwidth affect the detected particle position when considering nanoparticles in traps with strong stiffness, leading to inaccurate size predictions. Here, we propose a ResNet-based method for accurate size characterization of trapped nanoparticles, which is trained by considering only simulated time series data of nanoparticles' constrained Brownian motion. Experiments prove the method outperforms state-of-art sizing algorithms such as adjusted Lorentzian fitting or CNN-based networks on both standard nanoparticles and extracellular vesicles (EVs), as well as maintains good accuracy even when measurement times are relatively short (<1s per particle). On samples of clinical EVs, our network demonstrates a well-generalized ability to accurately determine the EV size distribution, as confirmed by comparison with gold-standard nanoparticle tracking analysis (NTA). Furthermore, by combining the sizing network with still frame images from high-speed video, the camera-based optical tweezers have the unique capacity to quantify both the size and refractive index of bio-nanoparticles at the single-particle level. These experiments prove the proposed sizing network as an ideal path for predicting the morphological heterogeneity of bio-nanoparticles in optical potential trapping-related measurements.

Formation of Two-Dimensional Magnetically Responsive Clusters Using Hematite Particles Self-Assembled via Particle-Induced Heating at an Interface

Hematite particles, which exhibit a high magnetic moment, are used to apply large forces on physical and biological systems under magnetic fields to investigate various phenomena, such as those of rheology and micromanipulation. However, the magnetic confinement of these particles requires complicated field configurations. On the other hand, laser-assisted optical confinement of single hematite particles results in thermophoresis and subsequent ejection of the particle from the laser spot. Herein, we explore an alternative strategy to induce the self-assembly of hematite. In this strategy, with indirect influence from an optically confined and heated upconverting particle (UCP) at an air-water interface, there is the generation of convection currents that facilitate assembly. We also show that the assembly remains at the interface even after removal of the laser light. The hematite particle assemblies can then be moved using magnetic fields and employed to perform interfacial rheology.

Multiple miRNA Detection through a Suspended Microbead Array Encoded by Triple-Color Upconversion Luminescent Nanotags via Bi-Beam Splitter Hybrid-Multitrap Optical Tweezers

In recent years, optical tweezers have become a novel tool for biodetection, and to improve the inefficiency of a single trap, the development of multitraps is required. Herein, we constructed a set of hybrid multitrap optical tweezers with the balance of stability and flexibility by the combination of two different beam splitters, a diffraction optical element (DOE) and galvano mirrors (GMs), to capture polystyrene (PS) microbeads in aqueous solutions to create an 18-trap suspended array. A sandwich hybridization strategy of DNA-miRNA-DNA was adopted to detect three kinds of target miRNAs associated with triple negative breast cancer (TNBC), in which different upconversion nanoparticles (UCNPs) with red, green, and blue emissions were applied as luminescent tags to encode the carrier PS microbeads to further indicate the levels of the targets. With encoded luminescent microbeads imaged by a three-channel microscopic system, the biodetection displayed high sensitivity with low limits of detection (LODs) of 0.27, 0.32, and 0.33 fM and exceptional linear ranges of 0.5 fM to 1 nM, 0.7 fM to 1 nM, and 1 fM to 1 nM for miR-343-3p, miR-155, and miR-199a-5p, respectively. In addition, this bead-based assay method was demonstrated to have the potential for being applied in patients' serum by satisfactory standard addition recovery experiment results.

A Review of Single-Cell Microrobots: Classification, Driving Methods and Applications

Single-cell microrobots are new microartificial devices that use a combination of single cells and artificial devices, with the advantages of small size, easy degradation and ease of manufacture. With externally driven strategies such as light fields, sound fields and magnetic fields, microrobots are able to carry out precise micromanipulations and movements in complex microenvironments. Therefore, single-cell microrobots have received more and more attention and have been greatly developed in recent years. In this paper, we review the main classifications, control methods and recent advances in the field of single-cell microrobot applications. First, different types of robots, such as cell-based microrobots, bacteria-based microrobots, algae-based microrobots, etc., and their design strategies and fabrication processes are discussed separately. Next, three types of external field-driven technologies, optical, acoustic and magnetic, are presented and operations realized in vivo and in vitro by applying these three technologies are described. Subsequently, the results achieved by these robots in the fields of precise delivery, minimally invasive therapy are analyzed. Finally, a short summary is given and current challenges and future work on microbial-based robotics are discussed.

Optofluidic Tweezers: Efficient and Versatile Micro/Nano-Manipulation Tools

Optical tweezers (OTs) can transfer light momentum to particles, achieving the precise manipulation of particles through optical forces. Due to the properties of non-contact and precise control, OTs have provided a gateway for exploring the mysteries behind nonlinear optics, soft-condensed-matter physics, molecular biology, and analytical chemistry. In recent years, OTs have been combined with microfluidic chips to overcome their limitations in, for instance, speed and efficiency, creating a technology known as "optofluidic tweezers." This paper describes static OTs briefly first. Next, we overview recent developments in optofluidic tweezers, summarizing advancements in capture, manipulation, sorting, and measurement based on different technologies. The focus is on various kinds of optofluidic tweezers, such as holographic optical tweezers, photonic-crystal optical tweezers, and waveguide optical tweezers. Moreover, there is a continuing trend of combining optofluidic tweezers with other techniques to achieve greater functionality, such as antigen-antibody interactions and Raman tweezers. We conclude by summarizing the main challenges and future directions in this research field.

Gradient torque and its effect on rotational dynamics of optically trapped non-spherical particles in the elliptic Gaussian beam

Rotational motion of the optically trapped particle is a topic of enduring interest, while the changes of angular velocity in one rotation period remain largely unexplored. Here, we proposed the optical gradient torque in the elliptic Gaussian beam, and the instantaneous angular velocities of alignment and fluctuant rotation of the trapped non-spherical particles are investigated for the first time. The fluctuant rotations of optically trapped particles are observed, and the angular velocity fluctuated twice per rotation period, which can be used to determine the shape of trapped particles. Meanwhile, a compact optical wrench is invented based on the alignment, and its torque is adjustable and is larger than the torque of a linearly polarized wrench with the same power. These results provide a foundation for precisely modelling the rotational dynamics of optically trapped particles, and the presented wrench is expected to be a simple and practical micro-manipulating tool.

Optical trapping with holographically structured light for single-cell studies

A groundbreaking work in 1970 by Arthur Ashkin paved the way for developing various optical trapping techniques. Optical tweezers have become an established method for the manipulation of biological objects, due to their noninvasiveness and precise controllability. Recent innovations are accelerating and now enable single-cell manipulation through holographic light structuring. In this review, we provide an overview of recent advances in optical tweezer techniques for studies at the individual cell level. Our review focuses on holographic optical tweezers that utilize active spatial light modulators to noninvasively manipulate live cells. The versatility of the technology has led to valuable integrations with microscopy, microfluidics, and biotechnological techniques for various single-cell studies. We aim to recapitulate the basic principles of holographic optical tweezers, highlight trends in their biophysical applications, and discuss challenges and future prospects.

Ferromagnetic Flexible Electronics for Brain-Wide Selective Neural Recording

Flexible microelectronics capable of straightforward implantation, remotely controlled navigation, and stable long-term recording hold great promise in diverse medical applications, particularly in deciphering complex functions of neural circuits in the brain. Existing flexible electronics, however, are often limited in bending and buckling during implantation, and unable to access a large brain region. Here, an injectable class of electronics with stable recording, omnidirectional steering, and precise navigating capabilities based on magnetic actuation is presented. After simple transcriptional injection, the rigid coatings are biodegraded quickly and the bundles of magnetic-nanoparticles-coated microelectrodes become separated, ultra-flexible, and magnetic actuated for further minimally invasive three-dimensional interpenetration in the brain. As proof of concept, this paradigm-shifting approach is demonstrated for selective and multiplexed neural activities recording across distant regions in the deep rodent brains. Coupling with optogenetic neural stimulation, the unique capabilities of this platform in electrophysiological readouts of projection dynamics in vivo are also demonstrated. The ability of these miniaturized, remotely controllable, and biocompatible ferromagnetic flexible electronics to afford minimally invasive manipulations in the soft tissues of the mammalian brain foreshadows applications in other organ systems, with great potential for broad utility in biomedical science and engineering.

Advances in Microfluidics for Single Red Blood Cell Analysis

The utilizations of microfluidic chips for single RBC (red blood cell) studies have attracted great interests in recent years to filter, trap, analyze, and release single erythrocytes for various applications. Researchers in this field have highlighted the vast potential in developing micro devices for industrial and academia usages, including lab-on-a-chip and organ-on-a-chip systems. This article critically reviews the current state-of-the-art and recent advances of microfluidics for single RBC analyses, including integrated sensors and microfluidic platforms for microscopic/tomographic/spectroscopic single RBC analyses, trapping arrays (including bifurcating channels), dielectrophoretic and agglutination/aggregation studies, as well as clinical implications covering cancer, sepsis, prenatal, and Sickle Cell diseases. Microfluidics based RBC microarrays, sorting/counting and trapping techniques (including acoustic, dielectrophoretic, hydrodynamic, magnetic, and optical techniques) are also reviewed. Lastly, organs on chips, multi-organ chips, and drug discovery involving single RBC are described. The limitations and drawbacks of each technology are addressed and future prospects are discussed.

Magnetic microrheometry of tumor-relevant stiffness levels and probabilistic quantification of viscoelasticity differences inside 3D cell culture matrices

The progression of breast cancer involves cancer-cell invasions of extracellular matrices. To investigate the progression, 3D cell cultures are widely used along with different types of matrices. Currently, the matrices are often characterized using parallel-plate rheometry for matrix viscoelasticity, or liquid-like viscous and stiffness-related elastic characteristics. The characterization reveals averaged information and sample-to-sample variation, yet, it neglects internal heterogeneity within matrices, experienced by cancer cells in 3D culture. Techniques using optical tweezers and magnetic microrheometry have measured heterogeneity in viscoelasticity in 3D culture. However, there is a lack of probabilistic heterogeneity quantification and cell-size-relevant, microscale-viscoelasticity measurements at breast-tumor tissue stiffness up to ≃10 kPa in Young's modulus. Here, we have advanced methods, for the purpose, which use a magnetic microrheometer that applies forces on magnetic spheres within matrices, and detects the spheres displacements. We present probabilistic heterogeneity quantification using microscale-viscoelasticity measurements in 3D culture matrices at breast-tumor-relevant stiffness levels. Bayesian multilevel modeling was employed to distinguish heterogeneity in viscoelasticity from the effects of experimental design and measurement errors. We report about the heterogeneity of breast-tumor-relevant agarose, GrowDex, GrowDex-collagen and fibrin matrices. The degree of heterogeneity differs for stiffness, and phase angle (i.e. ratio between viscous and elastic characteristics). Concerning stiffness, agarose and GrowDex show the lowest and highest heterogeneity, respectively. Concerning phase angle, fibrin and GrowDex-collagen present the lowest and the highest heterogeneity, respectively. While this heterogeneity information involves softer matrices, probed by ≃30 μm magnetic spheres, we employ larger ≃100 μm spheres to increase magnetic forces and acquire a sufficient displacement signal-to-noise ratio in stiffer matrices. Thus, we show pointwise microscale viscoelasticity measurements within agarose matrices up to Young's moduli of 10 kPa. These results establish methods that combine magnetic microrheometry and Bayesian multilevel modeling for enhanced heterogeneity analysis within 3D culture matrices.

Optical Force of Bessel Pincer Light-Sheets Beam on a Dielectric Sphere of Arbitrary Size

In the framework of Generalized Lorenz-Mie theory (GLMT), based on the expansion results of electromagnetic field radiation components of Bessel pincer light sheets beam acting on dielectric particles of arbitrary size, the expression of radiation force components in a Cartesian coordinate system is obtained by using the Maxwell stress tensor method. On the one hand, the effects of the refractive index and the equivalent radius of spherical particles on the distribution of radiation force are discussed; On the other hand, the influence of beam scaling parameter and beam order of Bessel pincer light sheets beam on the distribution of radiation force are investigated. The results indicate that the changes of particle's refractive index and effective radius only affect the distribution of radiation force. However, the beam scaling parameter and beam order of Bessel pincer light sheets beam have a very sharp impact on the convergence position, distribution range and bending degree far away from the wave source of the radiation force. Single-beam optical tweezers using the self-focusing and self-bending Bessel pincer light-sheets beam are crucial for applications such as single molecule biophysics, optical manipulation and particle separation/clearing.

Recent Progress on Optical Micro/Nanomanipulations: Structured Forces, Structured Particles, and Synergetic Applications

Optical manipulation has achieved great success in the fields of biology, micro/nano robotics and physical sciences in the past few decades. To date, the optical manipulation is still witnessing substantial progress powered by the growing accessibility of the complex light field, advanced nanofabrication and developed understandings of light-matter interactions. In this perspective, we highlight recent advancements of optical micro/nanomanipulations in cutting-edge applications, which can be fostered by structured optical forces enabled with diverse auxiliary multiphysical field/forces and structured particles. We conclude with our vision of ongoing and futuristic directions, including heat-avoided and heat-utilized manipulation, nonlinearity-mediated trapping and manipulation, metasurface/two-dimensional material based optical manipulation, as well as interface-based optical manipulation.

High-Resolution Micro-object Separation by Rotating Magnetic Chromatography

The development of new technologies for the separation, selection, and isolation of microparticles such as rare target cells, circulating tumor cells, cancer stem cells, and immune cells has become increasingly important in the last few years. Microparticle separation technologies are usually applied to the analysis of disease-associated cells, but these procedures often face a cell separation problem that is often insufficient for single specific cell analyses. To overcome these limitations, a highly accurate size-based microparticle separation technique, herein called "rotating magnetic chromatography", is proposed in this work. Magnetic nanoparticles, placed in a microfluidic separation channel, are forced to move in well-defined trajectories by an external magnetic field, colliding with microparticles that are in this way separated on the basis of their dimensions with high accuracy and reproducibility. The method was optimized by using fluorescein isothiocyanate-modified polystyrene particles (chosen as a reference standard) and then applied to the analysis of cancer cells like Hep-3B and SK-Hep-1, allowing their fast and high-resolution chromatographic separation as a function of their dimensions. Due to its unmatched sub-micrometer cell separation capabilities, RMC can be considered a break-through technique that can unlock new perspectives in different scientific fields, that is, in medical oncology.

Superimposed Hermite-Gaussian-correlated Schell-model beam with multiple off-axis vortices

We first introduce a class of a superimposed Hermite-Gaussian-correlated Schell model with a multiple off-axis vortices beam, with the side lobe of the beam carrying one to four vortex singularities at the source plane. Subsequently, the variation laws of this beam after being focused by a thin lens are studied theoretically to obtain the optimal beam parameters. The numerical simulation results show that the beam possesses a unique multiple vortex structure, phase structure, and orbital angular momentum. Its intensity resembles a spiral staircase rotating around the axes. The rotational symmetry property of the transverse energy flow along the z axis was broken by the vortices. The hot spot position can be adjusted flexibly by changing the off-axis distance of vortices. This study is of great significance for nondestructive capture and manipulation of multiple particles or cells.

Optically Manipulated Neutrophils as Native Microcrafts In Vivo

As the first line of host defense against invading pathogens, neutrophils have an inherent phagocytosis capability for the elimination of foreign agents and target loading upon activation, as well as the ability to transmigrate across blood vessels to the infected tissue, making them natural candidates to execute various medical tasks in vivo. However, most of the existing neutrophil-based strategies rely on their spontaneous chemotactic motion, lacking in effective activation, rapid migration, and high navigation precision. Here, we report an optically manipulated neutrophil microcraft in vivo through the organic integration of endogenous neutrophils and scanning optical tweezers, functioning as a native biological material and wireless remote controller, respectively. The neutrophil microcrafts can be remotely activated by light and then navigated to the target position along a designated route, followed by the fulfillment of its task in vivo, such as active intercellular connection, targeted delivery of nanomedicine, and precise elimination of cell debris, free from the extra construction or modification of the native neutrophils. On the basis of the innate immunologic function of neutrophils and intelligent optical manipulation, the proposed neutrophil microcraft might provide new insight for the construction of native medical microdevices for drug delivery and precise treatment of inflammatory diseases.

Non-Invasive Dynamic Reperfusion of Microvessels In Vivo Controlled by Optical Tweezers

Distributive shock is considered to be a condition of microvascular hypoperfusion, which can be fatal in severe cases. However, traditional therapeutic methods to restore the macro blood flow are difficult to accurately control the blood perfusion of microvessels, and the currently developed manipulation techniques are inevitably incompatible with biological systems. In our approach, infrared optical tweezers are used to dynamically control the microvascular reperfusion within subdermal capillaries in the pinna of mice. Furthermore, we estimate the effect of different optical trap positions on reperfusion at branch and investigate the effect of the laser power on reperfusion. The results demonstrate the ability of optical tweezers to control microvascular reperfusion. This strategy allows near-noninvasive reperfusion of the microvascular hypoperfusion in vivo. Hence, our work is expected to provide unprecedented insights into the treatment of distributive shock.

Manipulation of a Single Metal Nanowire by an Unpolarized Gaussian Beam

Optical manipulation of metal nanowires offers a promising route to building optoelectronic nanosystems, which remains a challenge because of their strong absorption or scattering properties. Here, precise optical manipulation of a single Ag nanowire, including capture, translation, rotation, immobilization, and release, was readily achieved within a large operation range of 100 μm by a single unpolarized Gaussian beam based on an optical scattering force. Besides, the optical forces and torques exerted on the Ag nanowires under different conditions were quantitatively analyzed and calculated by simulation to give insight into the manipulation mechanism. This proposed scattering-force-based optical manipulation method also has great position and orientation stability with a capture stiffness of 1.2 pN/μm and an orientation standard deviation of 0.3°. More surprisingly, it is independent of both laser polarization and the metal material, shape, and size and is a universal and promising strategy for the manipulation and assembly of nontransparent structures in mesoscopic/Mie sizes.

Microgripper Using Soft Microactuators for Manipulation of Living Cells

We present a microgripper actuated by a soft microactuator for manipulating a single living cell. Soft actuators have attracted attention in recent years because their compliance which can adapt to soft targets. In this study, we propose a microgripper actuated by soft thermoresponsive hydrogels. The thermoresponsive gel swells in water when the temperature is low and shrinks when the temperature is high. Therefore, the microgripper can be driven by controlling the temperature of the thermoresponsive gel. The gels are actuated by irradiating with infrared (IR) laser to localize heating. The actuation characteristics of the gripper were theoretically analyzed and we designed a gripper that gripped a ≈10 µm size cell. Additionally, we succeeded in actuating the fabricated microgripper with laser irradiation and gripping a single living cell.

In vivo acoustic manipulation of microparticles in zebrafish embryos

In vivo micromanipulation using ultrasound is an exciting technology with promises for cancer research, brain research, vasculature biology, diseases, and treatment development. In the present work, we demonstrate in vivo manipulation of gas-filled microparticles using zebrafish embryos as a vertebrate model system. Micromanipulation methods often are conducted in vitro, and they do not fully reflect the complex environment associated in vivo. Four piezoelectric actuators were positioned orthogonally to each other around an off-centered fluidic channel that allowed for two-dimensional manipulation of intravenously injected microbubbles. Selective manipulation of microbubbles inside a blood vessel with micrometer precision was achieved without interfering with circulating blood cells. Last, we studied the viability of zebrafish embryos subjected to the acoustic field. This successful high-precision, in vivo acoustic manipulation of intravenously injected microbubbles offers potentially promising therapeutic options.

In-plane subwavelength optical capsule for lab-on-a-chip nano-tweezers

In this Letter, we propose a new, to the best of our knowledge, proof-of-concept of optical nano-tweezers based on a pair of dielectric rectangular structures that are capable of generating a finite-volume in-plane optical capsule. Finite-difference time-domain simulations of light spatial distributions and optical trapping forces of a gold nanoparticle immersed in water demonstrate the physical concept of an in-plane subwavelength optical capsule integrated with a microfluidic mesoscale device. It is shown that the refractive index of and the distance between the two dielectric rectangular structures can effectively control the shape and axial position of the optical capsule. Such an in-plane mesoscale structure provides a new path for manipulating absorbing nano-particles or bio-particles in a compact planar architecture, and should thus lead to promising perspectives in lab-on-a-chip domains.

Multifunctional manipulation of red blood cells using optical tweezers

Serving as natural vehicles to deliver oxygen throughout the whole body, red blood cells (RBCs) have been regarded as important indicators for biomedical analysis and clinical diagnosis. Various diseases can be induced due to the dysfunction of RBCs. Hence, a flexible tool is required to perform precise manipulation and quantitative characterization of their physiological mechanisms and viscoelastic properties. Optical tweezers have emerged as potential candidates due to their noncontact manipulation and femtonewton-precision measurements. This review aimed to highlight the recent advances in the multifunctional manipulation of RBCs using optical tweezers, including controllable deformation, dynamic stretching, RBC aggregation, blood separation and Raman characterization. Further, great attentions have been focused on the precise assembly of functional biophotonics devices with trapped RBCs, and a brief overview was offered for the growing interests to manipulate RBCs in vivo.

Manipulation of single cells via a Stereo Acoustic Streaming Tunnel (SteAST)

At the single-cell level, cellular parameters, gene expression and cellular function are assayed on an individual but not population-average basis. Essential to observing and analyzing the heterogeneity and behavior of these cells/clusters is the ability to prepare and manipulate individuals. Here, we demonstrate a versatile microsystem, a stereo acoustic streaming tunnel, which is triggered by ultrahigh-frequency bulk acoustic waves and highly confined by a microchannel. We thoroughly analyze the generation and features of stereo acoustic streaming to develop a virtual tunnel for observation, pretreatment and analysis of cells for different single-cell applications. 3D reconstruction, dissociation of clusters, selective trapping/release, in situ analysis and pairing of single cells with barcode gel beads were demonstrated. To further verify the reliability and robustness of this technology in complex biosamples, the separation of circulating tumor cells from undiluted blood based on properties of both physics and immunity was achieved. With the rich selection of handling modes, the platform has the potential to be a full-process microsystem, from pretreatment to analysis, and used in numerous fields, such as in vitro diagnosis, high-throughput single-cell sequencing and drug development.

Optoelectronic tweezers: a versatile toolbox for nano-/micro-manipulation

This review covers the fundamentals, recent progress and state-of-the-art applications of optoelectronic tweezers technology, and demonstrates that optoelectronic tweezers technology is a versatile and powerful toolbox for nano-/micro-manipulation.

Isolating and culturing of single microbial cells by laser ejection sorting technology

Single cell isolation and cultivation play an important role in studying physiology, gene expression and functions of microorganisms. A series of single-cell isolation technologies have been developed, among which single-cell ejection technology is one of the most promising. Single cell ejection technology has applied Laser Induced Forward Transfer Technique (LIFT) to isolate bacteria but the viability (or recovery rate) of cells after sorting has not been clarified in the current research progress. In this work, to keep the cells alive as much as possible, we propose a three-layer LIFT system (top layer: 25-nm aluminum film; second layer: 3 μm agar media; third layer: liquid containing bacterial) for the isolation and cultivation of single Gram-negative (E. coli), Gram-positive (Lactobacillus rhamnosus GG, LGG), and eukaryotic microorganisms (Saccharomyces cerevisiae). The experiment results showed that the average survival rates for ejected pure single cells were 63% for Saccharomyces cerevisiae, 22% for E. coli DH5α, and 74% for LGG. In addition, we successfully isolated and cultured the GFP expressing E. coli JM109 from the mixture containing complex communities of soil bacteria by fluorescence signal. The average survival rate of E. coli JM109 was demonstrated to be 25.3%. In this study, the isolated and cultured single colonies were further confirmed by colony PCR and sequencing. Such precise sorting and cultivation technique of live single microbial cells could be coupled with other microscopic approaches to isolate single microorganisms with specific functions, revealing their roles in the natural community. Importance We developed a laser induced forward transfer (LIFT) technology to accurately isolate single live microbial cells. The cultivation recovery rates of the ejected single cells were 63% for Saccharomyces cerevisiae, 22% for E. coli DH5α, and 74% for Lactobacillus rhamnosus GG (LGG). Coupled LIFT with fluorescent microscope, we demonstrated that single cells of GFP expressing E. coli JM109 were sorted according to fluorescence signal from a complex community of soil bacteria, and subsequently cultured with 25% cultivation recovery rate. This single cell live sorting technology could isolate single microbes with specific functions, revealing their roles in the natural community.

Precise Control of Customized Macrophage Cell Robot for Targeted Therapy of Solid Tumors with Minimal Invasion

Injecting micro/nanorobots into the body to kill tumors is one of the ultimate ambitions for medical nanotechnology. However, injecting current micro/nanorobots based on 3D-printed biocompatible materials directly into blood vessels for targeted therapy is often difficult, and mistakes in targeting can cause serious side effects, such as blood clots, oxidative stress, or inflammation. The natural affinity of macrophages to tumors, and their natural phagocytosis and ability to invade tumors, make them outstanding drug delivery vehicles for targeted tumor therapy. Hence, a magnetically controlled cell robot (MCR) based on a macrophage drug carrier is proposed. Here, living macrophages are converted into MCRs through endocytosis of specially-designed magnetic nanoparticles loaded with doxorubicin and indocyanine green. Following this, the MCRs can be transported to tumors through the blood vessels using external magnetic fields, and penetrate the blood vessels into the interior of the tumor due to their deformability. With the MCR's cascaded drug release, targeted killing of tumors in mice is demonstrated, with minimal effects on the normal surrounding tissue. The ability to impart precise drug doses onto natural cells, such as macrophages, and load various functional components into the MCRs, offers an efficient method for precise targeted therapy.

Label-free rapid isolation of saccharomyces cerevisiae with optically induced dielectrophoresis-based automatic micromanipulation

Saccharomyces cerevisiae is well-known in the baking and brewing industries and always used for the preparation of probiotics, especially its subtype, Saccharomyces boulardii, to prevent and treat various diarrhea and intestinal diseases. However, case reports on the side effects of a wide range of serious infections for the elderly, immunocompromised and critically ill patients after treatment with the S. cerevisiae have been increasing in recent years. The existing diagnose methods of the invasive S. cerevisiae infections in clinical, especially, the key step of the method-cell isolation, is time-consuming that always miss timey diagnose and early prevention. Here, we propose a new automatic micromanipulation method to label-free rapid isolation of S. cerevisiae based on the optically-induced dielectrophoresis (ODEP) technology, combining with image processing and recognition. S. cerevisiae is firstly identified by the image recognition method and then, automatically captured and moved to the target location by designing optical patterns. The results indicate the method can flexibly and automatically manipulate multiple S. cerevisiae cells simultaneously, such as, arranging S. cerevisiae cells, moving an array of the cells at any directions, aggregating the cells, and separating S. cerevisiae from the solution mixed with impurities. This work represents a step toward the use of automatic micromanipulation of ODEP technology to automatically and rapidly isolate S. cerevisiae for the detection of the invasive S. cerevisiae infections.

Centrifugal motion of an optically levitated particle

Levitated optomechanical systems experience a tremendous development on detecting weak force and torque with the center of mass motion and rotation of the levitated particle. Here the levitated optomechanical system is established on a rotating platform, and the centrifugal motion of the particle is observed after rotating the optical platform. The centrifugal displacement of the particle is experimentally proven to show a quadratic function relation with the rotation speed, and the stiffness of the trap and the mass of the levitated particle are obtained from it separately. Furthermore, the centrifugal motion makes the particle deviate from the laser focus center, which would decrease the particle spin speed. These results will help to understand the centrifugal motion and fully consider this effect when the optomechanical system rotates.

Lateral Deformation of Human Red Blood Cells by Optical Tweezers

In this paper, we studied the lateral deformation of human red blood cells (RBCs) during lateral indentation by an optically trapped silica bead with a diameter of 4.5 µm (Bangs Laboratories, Inc. Fishers, IN, USA). The images were captured using a CCD camera and the Boltzmann statistics method was used for force calibration. Using the Hertz model, we calculated and compared the elastic stiffness resulting from the lateral force, showing that the differences are important and that the force should be considered. Besides the lateral component, this setup also allowed us to examine the lateral cell–bead interaction. The mean values of the cell shear stiffness measured during indentation were 3.37 ± 0.40 µN/m for biconcave RBCs, 3.48 ± 0.23 µN/m for spherical RBCs, and 3.80 ± 0.22 µN/m for crenelated RBCs, respectively. These results show that this approach can be used as a routine method for RBC study, because it enabled us to manipulate the cell without contact with the wall.

Single cell spectroscopy of red blood cells in intravenous crystalloid fluids

Crystalloid fluids, a subset of intravenous (IV) fluid solutions are commonly used in clinical settings. The influence of these fluids on the functions of blood components are least explored. Raman spectroscopy combined with optical trapping has been widely used to evaluate the impact of external stress agents on red blood cells. The present study investigates the impact of commonly used crystalloid fluids on red blood cells in comparison with that of blood plasma using Raman Tweezers spectroscopy. The red blood cells suspended in crystalloid fluids undergo deoxygenation readily than that in blood plasma. In addition, cells in blood plasma were able to withstand laser induced deoxygenation comparatively better than that in crystalloid fluids at higher laser powers. Principle component analysis of the Raman spectral data has clearly demonstrated the discrimination of cells in plasma with that of crystalloid fluids demonstrating the effect of external induced stress on RBCs.

Optical manipulation: advances for biophotonics in the 21st century

SIGNIFICANCE

Optical trapping is a technique capable of applying minute forces that has been applied to studies spanning single molecules up to microorganisms.

AIM

The goal of this perspective is to highlight some of the main advances in the last decade in this field that are pertinent for a biomedical audience.

APPROACH

First, the direct determination of forces in optical tweezers and the combination of optical and acoustic traps, which allows studies across different length scales, are discussed. Then, a review of the progress made in the direct trapping of both single-molecules, and even single-viruses, and single cells with optical forces is outlined. Lastly, future directions for this methodology in biophotonics are discussed.

RESULTS

In the 21st century, optical manipulation has expanded its unique capabilities, enabling not only a more detailed study of single molecules and single cells but also of more complex living systems, giving us further insights into important biological activities.

CONCLUSIONS

Optical forces have played a large role in the biomedical landscape leading to exceptional new biological breakthroughs. The continuous advances in the world of optical trapping will certainly lead to further exploitation, including exciting in-vivo experiments.

Nonlinearity-induced nanoparticle circumgyration at sub-diffraction scale

The ability of light beams to rotate nano-objects has important applications in optical micromachines and biotechnology. However, due to the diffraction limit, it is challenging to rotate nanoparticles at subwavelength scale. Here, we propose a method to obtain controlled fast orbital rotation (i.e., circumgyration) at deep subwavelength scale, based on the nonlinear optical effect rather than sub-diffraction focusing. We experimentally demonstrate rotation of metallic nanoparticles with orbital radius of 71 nm, to our knowledge, the smallest orbital radius obtained by optical trapping thus far. The circumgyration frequency of particles in water can be more than 1 kHz. In addition, we use a femtosecond pulsed Gaussian beam rather than vortex beams in the experiment. Our study provides paradigms for nanoparticle manipulation beyond the diffraction limit, which will not only push toward possible applications in optically driven nanomachines, but also spur more fascinating research in nano-rheology, micro-fluid mechanics and biological applications at the nanoscale.

Biophotonic probes for bio-detection and imaging

The rapid development of biophotonics and biomedical sciences makes a high demand on photonic structures to be interfaced with biological systems that are capable of manipulating light at small scales for sensitive detection of biological signals and precise imaging of cellular structures. However, conventional photonic structures based on artificial materials (either inorganic or toxic organic) inevitably show incompatibility and invasiveness when interfacing with biological systems. The design of biophotonic probes from the abundant natural materials, particularly biological entities such as virus, cells and tissues, with the capability of multifunctional light manipulation at target sites greatly increases the biocompatibility and minimizes the invasiveness to biological microenvironment. In this review, advances in biophotonic probes for bio-detection and imaging are reviewed. We emphatically and systematically describe biological entities-based photonic probes that offer appropriate optical properties, biocompatibility, and biodegradability with different optical functions from light generation, to light transportation and light modulation. Three representative biophotonic probes, i.e., biological lasers, cell-based biophotonic waveguides and bio-microlenses, are reviewed with applications for bio-detection and imaging. Finally, perspectives on future opportunities and potential improvements of biophotonic probes are also provided.

Separating and trapping of chiral nanoparticles with dielectric photonic crystal slabs

Chiral separation is a crucial step in many chemical synthesis processes, particularly for pharmaceuticals. Here we present a novel method for the realization of both separating and trapping of enantiomers using the dielectric photonic crystal (PhC) slabs, which possess quasi-fourfold degenerate Bloch modes (overlapping double degenerate transverse-electric-like and transverse-magnetic-like modes). Based on the designed structure, a large gradient of optical chirality appears near the PhC slab, leading to the extreme enhancement of chiral optical forces about 3 orders of magnitude larger than those obtained with circularly polarized lights. In this case, our method provides a reference for realizing all-optical enantiopure syntheses.

Optical tweezers beyond refractive index mismatch using highly doped upconversion nanoparticles

Optical tweezers are widely used in materials assembly¹, characterization², biomechanical force sensing^3,4 and the in vivo manipulation of cells⁵ and organs⁶. The trapping force has primarily been generated through the refractive index mismatch between a trapped object and its surrounding medium. This poses a fundamental challenge for the optical trapping of low-refractive-index nanoscale objects, including nanoparticles and intracellular organelles. Here, we report a technology that employs a resonance effect to enhance the permittivity and polarizability of nanocrystals, leading to enhanced optical trapping forces by orders of magnitude. This effectively bypasses the requirement of refractive index mismatch at the nanoscale. We show that under resonance conditions, highly doping lanthanide ions in NaYF₄ nanocrystals makes the real part of the Clausius-Mossotti factor approach its asymptotic limit, thereby achieving a maximum optical trap stiffness of 0.086 pN μm^-1 mW^-1 for 23.3-nm-radius low-refractive-index (1.46) nanoparticles, that is, more than 30 times stronger than the reported value for gold nanoparticles of the same size. Our results suggest a new potential of lanthanide doping for the optical control of the refractive index of nanomaterials, developing the optical force tag for the intracellular manipulation of organelles and integrating optical tweezers with temperature sensing and laser cooling⁷ capabilities.

A Versatile Optoelectronic Tweezer System for Micro-Objects Manipulation: Transportation, Patterning, Sorting, Rotating and Storage

Non-contact manipulation technology has a wide range of applications in the manipulation and fabrication of micro/nanomaterials. However, the manipulation devices are often complex, operated only by professionals, and limited by a single manipulation function. Here, we propose a simple versatile optoelectronic tweezer (OET) system that can be easily controlled for manipulating microparticles with different sizes. In this work, we designed and established an optoelectronic tweezer manipulation system. The OET system could be used to manipulate particles with a wide range of sizes from 2 μm to 150 μm. The system could also manipulate micro-objects of different dimensions like 1D spherical polystyrene microspheres, 2D rod-shaped euglena gracilis, and 3D spiral microspirulina. Optical microscopic patterns for trapping, storing, parallel transporting, and patterning microparticles were designed for versatile manipulation. The sorting, rotation, and assembly of single particles in a given region were experimentally demonstrated. In addition, temperatures measured under different objective lenses indicate that the system does not generate excessive heat to damage bioparticles. The non-contact versatile manipulation reduces operating process and contamination. In future work, the simple optoelectronic tweezers system can be used to control non-contaminated cell interaction and micro-nano manipulation.

Simultaneous and independent capture of multiple Rayleigh dielectric nanospheres with sine-modulated Gaussian beams

This study investigates the propagation properties and radiation forces on Rayleigh dielectric particles produced by novel sine-modulated Gaussian beams (SMGBs) because of the unique focusing properties of four independent light intensity distribution centers and possessing many deep potential wells in the output plane of the target laser. The described beams can concurrently capture and manipulate multiple Rayleigh dielectric spheres with high refractive indices without disturbing each other at the focus plane. Spheres with a low refractive index can be guided or confined in the focus but cannot be stably trapped in this single beam trap. Simulation results demonstrate that the focused SMGBs can be used to trap particle in different planes by increasing the sine-modulate coefficient g. The conditions for effective and stable capture of high-index particles and the threshold of detectable radius are determined at the end of this study.

Optical confinement efficiency in the single beam intracavity optical tweezers

Single beam intracavity optical tweezers characterizes a novel optical trapping scheme where the laser operation is nonlinearly coupled to the motion of the trapped particle. Here, we first present and establish a physical model from a completely new perspective to describe this coupling mechanism, using transfer matrices to calculate the loss of the free-space optical path and then extracting the scattering loss that caused by the 3D motions of the particle. Based on this model, we discuss the equilibrium position in the single beam intracavity optical tweezers. The influences of the numerical aperture, pumping power, particle radius and refractive index on the optical confinement efficiency are fully investigated, compared with standard optical tweezers. Our work is highly relevant for guiding the experiments on the single beam intracavity optical tweezers to achieve higher optical confinement efficiency.

Laser Induced Aggregation of Light Absorbing Particles by Marangoni Convection

Laser induced Marangoni convection can be used to accumulate micro-particles. In this paper, a method is developed to control and accumulate the light absorbing particles dispersed in a thin solution layer. The particles are irradiated by a focused laser beam. Due to the photothermal effect of the particles, the laser heating generates a thermal gradient and induces a convective flow around the laser’s heating center. The convective flow drives the particles to accumulate and form a particle aggregate close to the laser’s heating center. The motion of particles is dominated by the Marangoni convection. When the laser power is high, the vapor bubbles generated by laser heating on particles strengthen the convection, which accelerates the particles’ aggregation.

Self-Assembled GO Honeycomb Microarray for Selective Cancer Cell Capture and Single Cell Analysis of Proteolytic Expression

Proteolytic enzymes expressed by circulating tumor cells are proved to facilitate their invasion into multiple organs via cleaving natural ECM networks, leading to consequent metastasis colonization and malignant lethality. Recent evidence suggests the rare metastasis initiating cells with higher proteolytic levels among circulating tumor cells (CTCs) may strongly increase the risk of metastasis. Beyond selective CTC capture, the heterogeneity in proteases expression provides a promising indicator for metastasis happening. To this end, the graphene oxide (GO) honeycomb microarray with single CTC matched sizes is fabricated via the self-assembly breath figure approach, which serves as an integrated protocol for selective CTC capture and single-cell analysis of protease activity. Contributing to synergistic effects of structure and chemistry, CTCs can be efficiently isolated and individually trapped in each honeycomb hole. Meanwhile, the crosstalk among CTCs can be erased by blocking direct cell-to-cell contact, which offers promising potentials in the single-cell analysis of protease expression. Integrating specific capture and in situ analysis of single CTCs on GO micropatterned surface is of significant importance in various biological and clinical applications such as cancer diagnostics and cancer therapeutic evaluation.