Plasmon-induced photonic and energy-transfer enhancement of solar water splitting by a hematite nanorod array

Insights into copper(I) phenylacetylide with in-situ transformation of oxygen and enhanced visible-light response for water decontamination: Cu-O bond promotes exciton dissociation and charge transfer

The widespread contamination of hexavalent chromium (Cr(VI)), pharmaceuticals and personal care products (PPCPs), and dyes is a growing concern. necessitating the development of convenient and effective technologies for their removal. Copper(I) phenylacetylide (PhC2Cu) has emerged as a promising photocatalyst for environmental remediation. In this study, we introduced a functional Cu-O bond into PhC2Cu (referred to as OrPhC2Cu) by creatively converting the adsorbed oxygen on the surface of PhC2Cu into a Cu-O bond to enhance the efficiency of Cr(VI) photoreduction, PPCPs photodegradation, and dyes photodegradation through a facile vacuum activating method. The incorporation of the Cu-O bond optimized the electron structure of OrPhC2Cu, facilitating exciton dissociation and charge transfer. The exciton dissociation behavior and charge transfer mechanism were systematically investigated for the first time in the OrPhC2Cu system by photoelectrochemical tests, fluorescence and phosphorescence (PH) techniques, and density functional theory (DFT) calculations. Remarkably, the enhanced visible-light response of OrPhC2Cu improved photon utilization and significantly promoted the generation of reactive species (RSs), leading to the highly efficient Cr(VI) photoreduction (98.52% within 25 min) and sulfamethazine photodegradation (94.65% within 60 min), with 3.91 and 5.23 times higher activity compared to PhC2Cu. Additionally, the photocatalytic efficiency of OrPhC2Cu in degrading anionic dyes surpassed that of cationic dyes. The performance of the OrPhC2Cu system in treating electroplating effluent or natural water bodies suggests its potential for practical applications.

Advances in the heterostructures for enhanced hydrogen production efficiency: a comprehensive review

The growing global energy demand and heightened environmental consciousness have contributed to the increasing interest in green energy sources, including hydrogen production. However, the efficacy of this technology is contingent upon the efficient separation of charges, high absorption of sunlight, rapid charge transfer rate, abundant active sites and resistance to photodegradation. The utilization of photocatalytic heterostructures coupling two materials has proved to be effective in tackling the aforementioned challenges and delivering exceptional performance in the production of hydrogen. The present article provides a comprehensive overview of operational principles of photocatalysis and the combination of photocatalytic and piezo-catalytic applications with heterostructures, including the transfer behavior and mechanisms of photoexcited non-equilibrium carriers between the materials. Furthermore, the effects of recent advances and state-of-the-art designs of heterostructures on hydrogen production are discussed, offering practical approaches to form heterostructures for efficient hydrogen production.

Plasmon-Induced Hot Electrons in Nanostructured Materials: Generation, Collection, and Application to Photochemistry

Plasmon refers to the coherent oscillation of all conduction-band electrons in a nanostructure made of a metal or a heavily doped semiconductor. Upon excitation, the plasmon can decay through different channels, including nonradiative Landau damping for the generation of plasmon-induced energetic carriers, the so-called hot electrons and holes. The energetic carriers can be collected by transferring to a functional material situated next to the plasmonic component in a hybrid configuration to facilitate a range of photochemical processes for energy or chemical conversion. This article centers on the recent advancement in generating and utilizing plasmon-induced hot electrons in a rich variety of hybrid nanostructures. After a brief introduction to the fundamentals of hot-electron generation and decay in plasmonic nanocrystals, we extensively discuss how to collect the hot electrons with various types of functional materials. With a focus on plasmonic nanocrystals made of metals, we also briefly examine those based upon heavily doped semiconductors. Finally, we illustrate how site-selected growth can be leveraged for the rational fabrication of different types of hybrid nanostructures, with an emphasis on the parameters that can be experimentally controlled to tailor the properties for various applications.

Selective Oxidation of Alcohol to Valuable Aldehydes Using Water as a Promoter in a Photoelectrochemical Cell

Artificial photoelectrochemistry (PEC) has emerged as a promising and efficient technology for the sustainable conversion of solar energy into chemicals. In this study, we present a refined PEC process that enables the highly selective and stable production of piperonal and other valuable aldehydes through the oxidation of the corresponding alcohols. By employing Fe2O3 or TiO2 as the photoanode material and 2,2,6,6-tetramethylpiperidinooxy (TEMPO) as a redox mediator in an H2O/acetonitrile solution, we achieve 100% selectivity and a >95% Faradaic efficiency for piperonal production from piperonyl alcohol (PA) oxidation. Remarkably, we reveal the enhancing effect on the PA oxidation reactivity of appropriate-amount water in the solvent as it plays a crucial role in inhibiting the photoelectron-hole recombination efficiency and facilitating charge transfer. Mechanistic analysis suggests that TEMPO-mediated PA oxidation involves the formation of •O2- radicals by the reduction of oxygen on the cathode, resulting in water as the sole byproduct. Furthermore, our PEC oxidation system exhibits applications on the 100%-selective production of various conjugated aldehydes, including 4-anisaldehyde, cuminaldehyde, and the vitamin B6 derivative. By implementing a TiO2//Fe2O3 dual-photoanode system, we achieve an enhanced piperonal production rate of 31.2 μmol h-1 cm-2 at 1.0 V vs Ag/Ag+ and demonstrate its stability over a 102 h cyclic test, ensuring near-quantitative yield. This research illuminates the potential of the PEC strategy as a generally applicable method for the efficient production of high-value aldehydes.

Strong Interactions between Au Nanoparticles and BiVO4 Photoanode Boosts Hole Extraction for Photoelectrochemical Water Splitting

Strong metal-support interaction (SMSI) is widely proposed as a key factor in tuning catalytic performances. Herein, the classical SMSI between Au nanoparticles (NPs) and BiVO4 (BVO) supports (Au/BVO-SMSI) is discovered and used innovatively for photoelectrochemical (PEC) water splitting. Owing to the SMSI, the electrons transfer from V4+ to Au NPs, leading to the formation of electron-rich Au species (Auδ-) and strong electronic interaction (i.e., Auδ--Ov-V4+), which readily contributes to extract photogenerated holes and promote charge separation. Benefitted from the SMSI effect, the as-prepared Au/BVO-SMSI photoanode exhibits a superior photocurrent density of 6.25 mA cm-2 at 1.23 V versus the reversible hydrogen electrode after the deposition of FeOOH/NiOOH cocatalysts. This work provides a pioneering view for extending SMSI effect to bimetal oxide supports for PEC water splitting, and guides the interfacial electronic and geometric structure modulation of photoanodes consisting of metal NPs and reducible oxides for improved solar energy conversion efficiency.

Unraveling the mechanism of tip-enhanced molecular energy transfer

Electronic Energy Transfer (EET) between chromophores is fundamental in many natural light-harvesting complexes, serving as a critical step for solar energy funneling in photosynthetic plants and bacteria. The complicated role of the environment in mediating this process in natural architectures has been addressed by recent scanning tunneling microscope experiments involving EET between two molecules supported on a solid substrate. These measurements demonstrated that EET in such conditions has peculiar features, such as a steep dependence on the donor-acceptor distance, reminiscent of a short-range mechanism more than of a Förster-like process. By using state of the art hybrid ab initio/electromagnetic modeling, here we provide a comprehensive theoretical analysis of tip-enhanced EET. In particular, we show that this process can be understood as a complex interplay of electromagnetic-based molecular plasmonic processes, whose result may effectively mimic short range effects. Therefore, the established identification of an exponential decay with Dexter-like effects does not hold for tip-enhanced EET, and accurate electromagnetic modeling is needed to identify the EET mechanism.

Optimizing broadband antireflection with Au micropatterns: a combined FDTD simulation and two-beam LIL approach

Broadband antireflection (AR) is highly significant in a wide range of optical applications, and using a gold (Au) micropattern presents a viable method for controlling the behavior of light propagation. This study investigates a novel, to the best of our knowledge, methodology to achieve broadband AR properties in Au micropatterns. It employed the three-dimensional finite-difference time-domain (FDTD) method to simulate and optimize the design of micropatterns. In contrast, the fabrication of Au micropatterns was carried out using two-beam laser interference lithography (LIL). The fabricated Au micropatterns were characterized by a scanning electron microscope (SEM) and spectroscope to validate their antireflection and transmission properties and evaluate their performance at various wavelengths. The optimized Au micropatterns had a high transmittance rating of 96.2%. In addition, the device exhibits a broad-spectrum antireflective property, covering wavelengths ranging from 400 to 1100 nm. The simulation data and experimentally derived results show comparable patterns. These structures can potentially be employed in many optical devices, such as solar cells and photodetectors, whereby achieving optimal device performance reduced reflection and enhanced light absorption.

Optical and Electrical Modulation Strategies of Photoelectrodes for Photoelectrochemical Water Splitting

When constructing efficient, cost-effective, and stable photoelectrodes for photoelectrochemical (PEC) systems, the solar-driven photo-to-chemical conversion efficiency of semiconductors is limited by several factors, including the surface catalytic activity, light absorption range, carrier separation, and transfer efficiency. Accordingly, various modulation strategies, such as modifying the light propagation behavior and regulating the absorption range of incident light based on optics and constructing and regulating the built-in electric field of semiconductors based on carrier behaviors in semiconductors, are implemented to improve the PEC performance. Herein, the mechanism and research advancements of optical and electrical modulation strategies for photoelectrodes are reviewed. First, parameters and methods for characterizing the performance and mechanism of photoelectrodes are introduced to reveal the principle and significance of modulation strategies. Then, plasmon and photonic crystal structures and mechanisms are summarized from the perspective of controlling the propagation behavior of incident light. Subsequently, the design of an electrical polarization material, polar surface, and heterojunction structure is elaborated to construct an internal electric field, which serves as the driving force to facilitate the separation and transfer of photogenerated electron-hole pairs. Finally, the challenges and opportunities for developing optical and electrical modulation strategies for photoelectrodes are discussed.

Designing Metasurfaces for Efficient Solar Energy Conversion

Metasurfaces have recently emerged as a promising technological platform, offering unprecedented control over light by structuring materials at the nanoscale using two-dimensional arrays of subwavelength nanoresonators. These metasurfaces possess exceptional optical properties, enabling a wide variety of applications in imaging, sensing, telecommunication, and energy-related fields. One significant advantage of metasurfaces lies in their ability to manipulate the optical spectrum by precisely engineering the geometry and material composition of the nanoresonators' array. Consequently, they hold tremendous potential for efficient solar light harvesting and conversion. In this Review, we delve into the current state-of-the-art in solar energy conversion devices based on metasurfaces. First, we provide an overview of the fundamental processes involved in solar energy conversion, alongside an introduction to the primary classes of metasurfaces, namely, plasmonic and dielectric metasurfaces. Subsequently, we explore the numerical tools used that guide the design of metasurfaces, focusing particularly on inverse design methods that facilitate an optimized optical response. To showcase the practical applications of metasurfaces, we present selected examples across various domains such as photovoltaics, photoelectrochemistry, photocatalysis, solar-thermal and photothermal routes, and radiative cooling. These examples highlight the ways in which metasurfaces can be leveraged to harness solar energy effectively. By tailoring the optical properties of metasurfaces, significant advancements can be expected in solar energy harvesting technologies, offering new practical solutions to support an emerging sustainable society.

Single-Molecule Spectroscopy Reveals the Plasmon-Assisted Nanozyme Catalysis on AuNR@TiO2

Gold nanoparticles are frequently employed as nanozyme materials due to their capacity to catalyze various enzymatic reactions. Given their plasmonic nature, gold nanoparticles have also found extensive utility in chemical and photochemical catalysis owing to their ability to generate excitons upon exposure to light. However, their potential for plasmon-assisted catalytic enhancement as nanozymes has remained largely unexplored due to the inherent challenge of rapid charge recombination. In this study, we have developed a strategy involving the encapsulation of gold nanorods (AuNRs) within a titanium dioxide (TiO2) shell to facilitate the efficient separation of hot electron/hole pairs, thereby enhancing nanozyme reactivity. Our investigations have revealed a remarkable 10-fold enhancement in reactivity when subjected to 530 nm light excitation following the introduction of a TiO2 shell. Leveraging single-molecule kinetic analyses, we discovered that the presence of the TiO2 shell not only amplifies catalytic reactivity by prolonging charge relaxation times but also engenders additional reactive sites within the nanozyme's intricate structure. We anticipate that further enhancements in nanozyme performance can be achieved by optimizing interfacial interactions between plasmonic metals and semiconductors.

Quantum Plexcitonic Sensing

While fundamental to quantum sensing, quantum state control has been traditionally limited to extreme conditions. This restricts the impact of the practical implementation of quantum sensing on a broad range of physical measurements. Plexcitons, however, provide a promising path under ambient conditions toward quantum state control and thus quantum sensing, owing to their origin from strong plasmon-exciton coupling. Herein, we harness plexcitons to demonstrate quantum plexcitonic sensing by strongly coupling excitonic particles to a plasmonic hyperbolic metasurface. As compared to classical sensing in the weak-coupling regime, our model of quantum plexcitonic sensing performs at a level that is ∼40 times more sensitive. Noise-modulated sensitivity studies reinforce the quantum advantage over classical sensing, featuring better sensitivity, smaller sensitivity uncertainty, and higher resilience against optical noise. The successful demonstration of quantum plexcitonic sensing opens the door for a variety of physical, chemical, and biological measurements by leveraging strongly coupled plasmon-exciton systems.

Rugged Forest Morphology of Magnetoplasmonic Nanorods that Collect Maximum Light for Photoelectrochemical Water Splitting

A feasible nanoscale framework of heterogeneous plasmonic materials and proper surface engineering can enhance photoelectrochemical (PEC) water-splitting performance owing to increased light absorbance, efficient bulk carrier transport, and interfacial charge transfer. This article introduces a new magnetoplasmonic (MagPlas) Ni-doped Au@Fex Oy nanorods (NRs) based material as a novel photoanode for PEC water-splitting. A two stage procedure produces core-shell Ni/Au@Fex Oy MagPlas NRs. The first-step is a one-pot solvothermal synthesis of Au@Fex Oy . The hollow Fex Oy nanotubes (NTs) are a hybrid of Fe2 O3 and Fe3 O4 , and the second-step is a sequential hydrothermal treatment for Ni doping. Then, a transverse magnetic field-induced assembly is adopted to decorate Ni/Au@Fex Oy on FTO glass to be an artificially roughened morphologic surface called a rugged forest, allowing more light absorption and active electrochemical sites. Then, to characterize its optical and surface properties, COMSOL Multiphysics simulations are carried out. The core-shell Ni/Au@Fex Oy MagPlas NRs increase photoanode interface charge transfer to 2.73 mAcm-2 at 1.23 V RHE. This improvement is made possible by the rugged morphology of the NRs, which provide more active sites and oxygen vacancies as the hole transfer medium. The recent finding may provide light on plasmonic photocatalytic hybrids and surface morphology for effective PEC photoanodes.

Promises of Plasmonic Antenna-Reactor Systems in Gas-Phase CO2 Photocatalysis

Sunlight-driven photocatalytic CO2 reduction provides intriguing opportunities for addressing the energy and environmental crises faced by humans. The rational combination of plasmonic antennas and active transition metal-based catalysts, known as "antenna-reactor" (AR) nanostructures, allows the simultaneous optimization of optical and catalytic performances of photocatalysts, and thus holds great promise for CO2 photocatalysis. Such design combines the favorable absorption, radiative, and photochemical properties of the plasmonic components with the great catalytic potentials and conductivities of the reactor components. In this review, recent developments of photocatalysts based on plasmonic AR systems for various gas-phase CO2 reduction reactions with emphasis on the electronic structure of plasmonic and catalytic metals, plasmon-driven catalytic pathways, and the role of AR complex in photocatalytic processes are summarized. Perspectives in terms of challenges and future research in this area are also highlighted.

Recent Progress in Interface Engineering of Nanostructures for Photoelectrochemical Energy Harvesting Applications

With rapid and continuous consumption of nonrenewable energy, solar energy can be utilized to meet the energy requirement and mitigate environmental issues in the future. To attain a sustainable society with an energy mix predominately dependent on solar energy, photoelectrochemical (PEC) device, in which semiconductor nanostructure-based photocatalysts play important roles, is considered to be one of the most promising candidates to realize the sufficient utilization of solar energy in a low-cost, green, and environmentally friendly manner. Interface engineering of semiconductor nanostructures has been qualified in the efficient improvement of PEC performances including three basic steps, i.e., light absorption, charge transfer/separation, and surface catalytic reaction. In this review, recently developed interface engineering of semiconductor nanostructures for direct and high-efficiency conversion of sunlight into available forms (e.g., chemical fuels and electric power) are summarized in terms of their atomic constitution and morphology, electronic structure and promising potential for PEC applications. Extensive efforts toward the development of high-performance PEC applications (e.g., PEC water splitting, PEC photodetection, PEC catalysis, PEC degradation and PEC biosensors) are also presented and appraised. Last but not least, a brief summary and personal insights on the challenges and future directions in the community of next-generation PEC devices are also provided.

Quantum-Coherence-Enhanced Hot-Electron Injection under Modal Strong Coupling

Modal strong coupling between localized surface plasmon resonance and a Fabry-Pérot nanocavity has been studied to improve the quantum efficiency of artificial photosynthesis. In this research, we employed Au nanodisk/titanium dioxide/Au film modal strong coupling structures to investigate the mechanism of quantum efficiency enhancement. We found that the quantum coherence within the structures enhances the apparent quantum efficiency of the hot-electron injection from the Au nanodisks to the titanium dioxide layer. Under near-field mapping using photoemission electron microscopy, the existence of quantum coherence was directly observed. Furthermore, the coherence area was quantitatively evaluated by analyzing the relationship between the splitting energy and the particle number density of the Au nanodisks. This quantum-coherence-enhanced hot-electron injection is supported by our theoretical model. Based on these results, applying quantum coherence to photochemical reaction systems is expected to effectively enhance reaction efficiencies.

Photo-sterilization of groundwater by tellurium and enhancement by micro/nano bubbles

In rural areas where low-temperature groundwater is used as a drinking water source, cost-effective sterilization techniques are needed to prevent groundwater consumers from the disease risks triggered by pathogenic microorganisms like Escherichia coli and fungal spores. In this study, micro/nano bubbles (MNBs) coupled with the tellurium (Te)-based catalysts were used to considerably enhance the solar disinfection (SODIS) efficiency while overcoming the intrinsic defects of SODIS, particularly in low-temperature. Sterilization tests showed that 6.5 log₁₀ cfu/mL of E. coli K-12 and 4.0 log₁₀ cfu/mL of Aspergillus niger spores were completely inactivated within 5 min while applying this novel process for disinfection of raw groundwater, even in low-temperature. The underlying mechanisms of the extraordinary sterilization efficiency were revealed through comprehensive characterization of the catalysts and the physiological changes of the microorganisms. The localized surface plasmon resonance (LSPR) effect of the Te catalysts was identified to take advantage of photothermal synergism to achieve cell death. The integration of MNBs with the facet-engineered Te catalysts improved the photothermal catalytic effect and extracellular electron transfer, which substantially strengthened disinfection efficiency. This study provides a targeted solution into microbial inactivation in groundwater and emphasizes a cost-effective groundwater sterilization process.

Assembled Photonic Crystal/Gold Nanoparticle Interface: A Dual Amplifying Electrochemiluminescent Aptasensor for the Ultrasensitive Detection of an Amyloid-β Monomer

Amyloid-β (Aβ) protein is considered to be a key biomarker that is closely associated with Alzheimer's disease (AD). The level of Aβ, particularly its subtle fluctuation, indicates early neuropathological changes, which poses a considerable challenge in predicting AD, considering the detection limit of sensing technologies. Herein, a new label-free sensor based on luminol electrochemiluminescence (ECL) was proposed by developing a close-packed monolayered-SiO2 array with gold (Au) nanoparticles (NPs) entrapped in their gaps as the basal electrode. The well-organized SiO2 NPs with a quasiphotonic crystal structure amplified the ECL signal via light scattering, while Au NPs amplified the signal by directly catalyzing luminol oxidation. Owing to the dual signal amplification, the proposed electrode furnished an ∼64-fold-intensified ECL signal of luminol as the sensing background. Further, the as-prepared ECL electrode served as the substrate to develop an aptasensor for the sensitive detection of Aβ. The inhibition of the ECL signal due to the suppressed diffusion of luminol to the sensor surface acts as an indicator to quantify the amount of Aβ. The transfer dynamics mechanism provides a label-free sensing strategy and facilitates the high sensitivity of the aptasensor for Aβ detection. Under optimal conditions, the developed aptasensor exhibits an ultrasensitive performance for Aβ with a very low limit of detection of 5 fM, providing a new prospect for clinical research on Aβ and a promising approach in the field of ECL sensing.

Dynamic semiconductor-electrolyte interface for sustainable solar water splitting over 600 hours under neutral conditions

Photoelectrochemical (PEC) water splitting that functions in pH-neutral electrolyte attracts increasing attention to energy demand sustainability. Here, we propose a strategy to in situ form a NiB layer by tuning the composition of the neutral electrolyte with the additions of nickel and borate species, which improves the PEC performance of the BiVO₄ photoanode. The NiB/BiVO₄ exhibits a photocurrent density of 6.0 mA cm^-2 at 1.23 V_RHE with an onset potential of 0.2 V_RHE under 1 sun illumination. The photoanode displays a photostability of over 600 hours in a neutral electrolyte. The additive of Ni²⁺ in the electrolyte, which efficiently inhibits the dissolution of NiB, can accelerate the photogenerated charge transfer and enhance the water oxidation kinetics. The borate species with B─O bonds act as a promoter of catalyst activity by accelerating proton-coupled electron transfer. The synergy effect of both species suppresses the surface charge recombination and inhibits the photocorrosion of BiVO₄.

Zinc vacancy mediated electron-hole separation in ZnO nanorod arrays for high-sensitivity organic photoelectrochemical transistor aptasensor

A novel strong solvent coordination leaching method was developed to prepare surface zinc vacancies in ZnO nanorod arrays. Remarkably, the surface-zinc-vacancy-rich ZnO nanorod arrays exhibit high electron-hole separation efficiency and excellent photoelectrochemical performance for use as a promising candidate for the next generation of organic photoelectrochemical transistor aptasensors.

Magnetron Sputtered Al Co-Doped with Zr-Fe2O3 Photoanode with Fortuitous Al2O3 Passivation Layer to Lower the Onset Potential for Photoelectrochemical Solar Water Splitting

In this paper, we investigate the magnetron sputtering deposition of an Al-layer on Zr-doped FeOOH (Zr-FeOOH) samples to fabricate a Zr/Al co-doped Fe2O3 (Al-Zr/HT) photoanode. An Al-layer is deposited onto Zr-FeOOH through magnetron sputtering and the thickness of the Al deposition is regulated by differing the sputtering time. Electrochemical impedance spectroscopy, intensity-modulated photocurrent spectroscopy, Mott-Schottky and time-resolved photoluminescence spectra analyses were used to study, in depth, the correlations between sputtered Al-layer thicknesses and PEC characteristics. High-temperature quenching (800 °C) assists in diffusing the Al3+ in the bulk of the Zr-doped Fe2O3 photoanode, whilst an unintended Al2O3 passivation layer forms on the surface. The optimized Al-Zr/HT photoelectrode achieved 0.945 mA/cm2 at 1.0 VRHE, which is 3-fold higher than that of the bare Zr/HT photoanode. The Al2O3 passivation layer causes a 100 mV cathodic shift in the onset potential. Al co-doping improved the donor density, thus reducing the electron transit time. In addition, the passivation effect of the Al2O3 layer ameliorated the surface charge transfer kinetics. The Al2O3 passivation layer suppressed the surface charge transfer resistance, consequently expediting the hole migration from photoanode to electrolyte. We believe that the thickness-controlled Al-layer sputtering approach could be applicable for various metal oxide photoanodes to lower the onset potential.

Materials Perspectives of Integrated Plasmonic Biosensors

With the growing need for portable, compact, low-cost, and efficient biosensors, plasmonic materials hold the promise to meet this need owing to their label-free sensitivity and deep light-matter interaction that can go beyond the diffraction limit of light. In this review, we shed light on the main physical aspects of plasmonic interactions, highlight mainstream and future plasmonic materials including their merits and shortcomings, describe the backbone substrates for building plasmonic biosensors, and conclude with a brief discussion of the factors affecting plasmonic biosensing mechanisms. To do so, we first observe that 2D materials such as graphene and transition metal dichalcogenides play a major role in enhancing the sensitivity of nanoparticle-based plasmonic biosensors. Then, we identify that titanium nitride is a promising candidate for integrated applications with performance comparable to that of gold. Our study highlights the emerging role of polymer substrates in the design of future wearable and point-of-care devices. Finally, we summarize some technical and economic challenges that should be addressed for the mass adoption of plasmonic biosensors. We believe this review will be a guide in advancing the implementation of plasmonics-based integrated biosensors.

Menezes L, Tittl A, Ren H, Maier SA. Optical Metasurfaces for Energy Conversion

Nanostructured surfaces with designed optical functionalities, such as metasurfaces, allow efficient harvesting of light at the nanoscale, enhancing light-matter interactions for a wide variety of material combinations. Exploiting light-driven matter excitations in these artificial materials opens up a new dimension in the conversion and management of energy at the nanoscale. In this review, we outline the impact, opportunities, applications, and challenges of optical metasurfaces in converting the energy of incoming photons into frequency-shifted photons, phonons, and energetic charge carriers. A myriad of opportunities await for the utilization of the converted energy. Here we cover the most pertinent aspects from a fundamental nanoscopic viewpoint all the way to applications.

Band gap and Morphology Engineering of Hematite Nanoflakes from an Ex Situ Sn Doping for Enhanced Photoelectrochemical Water Splitting

In this article, we report a simple ex situ Sn-doping method on hematite nanoflakes (coded as MSnO2-H) that can protect the nanoflake (NF) morphology against the 800 °C high-temperature annealing process and activate the photoresponse of hematite until 800 nm wavelength excitation. MSnO2-H has been fabricated by dropping SnCl4 ethanol solution on hematite nanoflakes homogeneously grown over the conductive FTO glass substrate and annealed at 500 °C to synthesize the SnO2 nanoparticles on hematite NFs. The Sn-treated samples were then placed in a furnace again, and the sintering process was conducted at 800 °C for 15 min. During this step, structure deformation of hematite occurs normally due to the grain boundary motion and oriented attachment. However, in the case of MSnO2-H, the outer SnO2 nanoparticles efficiently prevented a shape deformation and maintained the nanoflake shape owing to the encapsulation of hematite NFs. Furthermore, the interface of hematite/SnO2 nanoparticles became the spots for a heavy Sn ion doping. We demonstrated the generation of the newly localized states, resulting in an extension of the photoresponse of hematite until 800 nm wavelength light irradiation. Furthermore, we demonstrated that SnO2 nanoparticles can effectively act as a passivation layer, which can reduce the onset potential of hematite for water splitting redox reactions. The optimized MSnO2-H nanostructures showed a 2.84 times higher photocurrent density and 300 mV reduced onset potential compared with a pristine hematite nanoflake photoanode.

Dual functionality of surface plasmon resonance and barrier layer on the photosensing and optical nonlinearity of ZnO nanorod arrays

The dual functionality of plasmonic light harvesting and barrier spacing between Au nanoparticles (NPs) and ZnO nanorod arrays (NRsA) are spotlighted to investigate their impact on the photoconversion and optical nonlinearity in the present study. The passivating Al₂O₃ barrier layer permits high-energy hot electron tunneling and injection from Au to the ZnO NRsA. The structural, vibrational, morphological/elemental, and optical properties of ZnO NRsA/a-Al₂O₃/Au were characterized by X-ray diffraction (XRD), Raman scattering, field emission scanning electron microscopy/energy dispersive X-ray spectroscopy (FE-SEM/EDX), and ultraviolet-visible-near IR (UV-Vis-near IR) absorption, respectively. The optoelectronic and nonlinear optical properties were analyzed by current-voltage measurement and z-scan tests under red laser (655 nm) irradiation, respectively. To highlight the effect of surface plasmon charge transport-based photosensing and photo-harvesting, the irradiated light source is selected to have a photon energy lower than the ZnO bandgap energy and detuning from LSPR. The transfer of photo-induced hot electrons from the Au NPs localized surface plasmon resonance (LSPR) to the ZnO NRsA translates into photocurrent generation in photosensing performance. The reverse saturable absorption process is changed to saturable absorption after intercalating the Al₂O₃ spacing layer into the ZnO NRsA/Au interface. The typical values of the nonlinear refraction index and absorption coefficient are calculated as n₂ = +2.38 × 10^-5 cm² W^-1 and β = -0.17 cm W^-1 for the sandwiched ZnO NRsA/Al₂O₃/Au heterostructure, respectively. The sandwiched ZnO NRsA/amorphous Al₂O₃/Au heterostructure exhibits strong nonresonant optical nonlinearity, which has an excellent figure of merit for optical switching.

Latest Advances in Metasurfaces for SERS and SEIRA Sensors as Well as Photocatalysis

Metasurfaces can enable the confinement of electromagnetic fields on huge surfaces and zones, and they can thus be applied to biochemical sensing by using surface-enhanced Raman scattering (SERS) and surface-enhanced infrared absorption (SEIRA). Indeed, these metasurfaces have been examined for SERS and SEIRA sensing thanks to the presence of a wide density of hotspots and confined optical modes within their structures. Moreover, some metasurfaces allow an accurate enhancement of the excitation and emission processes for the SERS effect by supporting resonances at frequencies of these processes. Finally, the metasurfaces allow the enhancement of the absorption capacity of the solar light and the generation of a great number of catalytic active sites in order to more quickly produce the surface reactions. Here, we outline the latest advances in metasurfaces for SERS and SEIRA sensors as well as photocatalysis.

Defect Mediated Improvements in the Photoelectrochemical Activity of MoS2/SnS2 Ultrathin Sheets on Si Photocathode for Hydrogen Evolution

Solar-driven water electrolysis to produce hydrogen is one of the clean energy options for the current energy-related challenges. Si as a photocathode exhibits a large overpotential due to the slow hydrogen evolution reaction (HER) kinetics and hence needs to be modified with a cocatalyst layer. MoS₂ is a poor HER cocatalyst due to its inert basal plane. Activation of the MoS₂ basal plane will facilitate HER kinetics. In this study, we have incorporated SnS₂ into MoS₂ ultrathin sheets to induce defect formation and phase transformation. MoS₂/SnS₂ composite ultrathin sheets with a Sn²⁺ state create a large number of S vacancies on the basal sites. The optimized defect-rich MoS₂/SnS₂ ultrathin sheets decorated on surface-modified Si micro pyramids as photocathodes show a current density of -23.8 mA/cm² at 0 V with an onset potential of 0.23 V under acidic conditions, which is higher than that of the pristine MoS₂. The incorporation of SnS₂ into 2H-MoS₂ ultrathin sheets not only induces a phase but also can alter the local atomic arrangement, which in turn is verified by their magnetic response. The diamagnetic SnS₂ phase causes a decrease in symmetry and an increase in magnetic anisotropy of the Mo³⁺ ions.

Plasmonic Metal/Semiconductor Heterostructure for Visible Light-Enhanced H2 Production

A plasmonic Ag/Bi₂WO₆ heterostructure, having Ag NPs deposited on Bi₂WO₆, is obtained by a hydrothermal and photodeposition method. The synthesized Ag/Bi₂WO₆ composite exhibits strong visible light absorption with a localized surface plasmon resonance (LSPR) and shows an enhanced photoabsorption property. It is demonstrated that such a Ag/Bi₂WO₆ heterostructure shows excellent plasmon-enhanced photocatalytic activity in the dehydrogenation of ammonia borane (NH₃BH₃) solution under visible light irradiation, which is due to the results from the synergetic effect between Ag NPs and emerging W⁵⁺ ions. More importantly, the performance of a Ag/Bi₂WO₆ hybrid is almost eight times higher than that of sole Bi₂WO₆ nanosheets. The introduction of LSPR of Ag in Bi₂WO₆ improves the electrical conductivity of the composite and lowers the recombination rate of charge carriers. This study opens up the opportunity of rationally fabricating plasmonic metal/semiconductor heterostructures for highly efficient photocatalysis.

Hot carrier extraction from plasmonic-photonic superimposed heterostructures

Plasmonic nanostructures have been exploited in photochemical and photocatalytic processes owing to their surface plasmon resonance characteristics. This unique property generates photoinduced potentials and currents capable of driving chemical reactions. However, these processes are hampered by low photon conversion and utilization efficiencies, which are issues that need to be addressed. In this study, we integrate plasmonic photochemistry and simple tunable heterostructure characteristics of a dielectric photonic crystal for the effective control of electromagnetic energy below the diffraction limit of light. The nanostructure comprises high-density Ag nanoparticles on nanocavity arrays of SrTiO₃ and TiO₂, where two oxides constitute a chemical heterojunction. Such a nanostructure is designed to form intense electric fields and a vectorial electron flow channel of Ag → SrTiO₃ → TiO₂. When the plasmonic absorption of Ag nanoparticles matched the photonic stopband, we observed an apparent quantum yield of 3.1 × 10^-4 e^- per absorbed photon. The contributions of light confinement and charge separation to the enhanced photocurrent were evaluated.

Activation of persulfate for degradation of sodium dodecyl sulfate by a hybrid catalyst hematite/cuprous sulfide with enhanced FeIII/FeII redox cycling

Surfactants are recalcitrant compounds that require advanced treatment for their degradation. Heterogeneous advanced oxidation processes (AOPs) using iron-based catalysts can be a promising method for surfactant degradation. The acceleration of the Fe^III/Fe^II redox cycling is the key to enhance the catalytic degradation. Herein, a hybrid catalyst composed of α-Fe₂O₃ and Cu₂S was synthesized to improve the reduction of Fe^III in a heterogeneous persulfate-AOP system. The results of XRD, Raman and TEM demonstrated the successful preparation of the hybrid catalyst. Because of the optimized Fe^II regeneration, the AOP containing the catalyst FC₇₅ achieved 100.0% removal of sodium dodecyl sulfate (SDS) in a neutral aquatic environment, significantly higher than 22.9 ± 2.4% with pure α-Fe₂O₃ or 39.6 ± 2.5% with pure Cu₂S. The catalyst FC₇₅ demonstrated effective SDS removal in the recycling test (82.7 ± 7.0% after six recycling test) and in actual wastewater (84.4 ± 4.5%). The regeneration of Fe^II was confirmed by the increased proportion of Fe^II from 39.5% in the fresh catalyst to 42.6% in the used catalyst. The main active species was revealed to be sulfate radicals under an acidic condition and shifted to hydroxyl radicals under a basic condition. In the hybrid catalyst, α-Fe₂O₃ provided Fe^II to activate persulfate to radicals, with an oxidation product of Fe^III, which was then reduced to Fe^II by Cu^I provided by Cu₂S, coupling with the oxidation of Cu^I to Cu^II. The S element in Cu₂S could directly or indirectly facilitate the Fe^III/Fe^II redox cycling as an electron donor. Those results have demonstrated that the developed hybrid catalyst is able to promote Fe^II regeneration for effective SDS removal.

Nanosphere Lithography: A Versatile Approach to Develop Transparent Conductive Films for Optoelectronic Applications

Transparent conductive films (TCFs) are irreplaceable components in most optoelectronic applications such as solar cells, organic light-emitting diodes, sensors, smart windows, and bioelectronics. The shortcomings of existing traditional transparent conductors demand the development of new material systems that are both transparent and electrically conductive, with variable functionality to meet the requirements of new generation optoelectronic devices. In this respect, TCFs with periodic or irregular nanomesh structures have recently emerged as promising candidates, which possess superior mechanical properties in comparison with conventional metal oxide TCFs. Among the methods for nanomesh TCFs fabrication, nanosphere lithography (NSL) has proven to be a versatile platform, with which a wide range of morphologically distinct nanomesh TCFs have been demonstrated. These materials are not only functionally diverse, but also have advantages in terms of device compatibility. This review provides a comprehensive description of the NSL process and its most relevant derivatives to fabricate nanomesh TCFs. The structure-property relationships of these materials are elaborated and an overview of their application in different technologies across disciplines related to optoelectronics is given. It is concluded with a perspective on current shortcomings and future directions to further advance the field.

Steering the Pathway of Plasmon-Enhanced Photoelectrochemical CO2 Reduction by Bridging Si and Au Nanoparticles through a TiO2 Interlayer

Photoelectrochemical (PEC) conversion of CO₂ in an aqueous medium into high-energy fuels is a creative strategy for storing solar energy and closing the anthropogenic carbon cycle. However, the rational design of catalytic architectures to selectively and efficiently produce a target product such as CO has remained a grand challenge. Herein, an efficient and selective Si photocathode for CO production is reported by utilizing a TiO₂ interlayer to bridge the Au nanoparticles and n⁺ p-Si. The TiO₂ interlayer can not only effectively protect and passivate Si surface, but can also exhibit outstanding synergies with Au nanoparticles to greatly promote CO₂ reduction kinetics for CO production through stabilizing the key reaction intermediates. Specifically, the TiO₂ layer and Au nanoparticles work concertedly to enhance the separation of localized surface plasmon resonance generated hot carriers, contributing to the improved activity and selectivity for CO production by utilizing the hot electrons generated in Au nanoparticles during PEC CO₂ reduction. The optimized Au/TiO₂ /n⁺ p-Si photocathode exhibits a Faradaic efficiency of 86% and a partial current density of -5.52 mA cm^-2 at -0.8 V_RHE for CO production, which represent state-of-the-art performance in this field. Such a plasmon-enhanced strategy may pave the way for the development of high-performance PEC photocathodes for energy-efficient CO₂ utilization.

Oxygen Evolution Reaction in Energy Conversion and Storage: Design Strategies Under and Beyond the Energy Scaling Relationship

The oxygen evolution reaction (OER) is the essential module in energy conversion and storage devices such as electrolyzer, rechargeable metal-air batteries and regenerative fuel cells. The adsorption energy scaling relations between the reaction intermediates, however, impose a large intrinsic overpotential and sluggish reaction kinetics on OER catalysts. Developing advanced electrocatalysts with high activity and stability based on non-noble metal materials is still a grand challenge. Central to the rational design of novel and high-efficiency catalysts is the development and understanding of quantitative structure-activity relationships, which correlate the catalytic activities with structural and electronic descriptors. This paper comprehensively reviews the benchmark descriptors for OER electrolysis, aiming to give an in-depth understanding on the origins of the electrocatalytic activity of the OER and further contribute to building the theory of electrocatalysis. Meanwhile, the cutting-edge research frontiers for proposing new OER paradigms and crucial strategies to circumvent the scaling relationship are also summarized. Challenges, opportunities and perspectives are discussed, intending to shed some light on the rational design concepts and advance the development of more efficient catalysts for enhancing OER performance.

Wavelength-Dependent Bifunctional Plasmonic Photocatalysis in Au/Chalcopyrite Hybrid Nanostructures

Excited, or "hot" charge carrier generation and transfer driven by the decay of localized surface plasmon resonances (LSPRs) are key steps in plasmonic photocatalysis. Hybrid structures that contain both metal and semiconductor building blocks facilitate the extraction of reactive charge carriers and their utilization for photoelectrocatalysis. Additional functionality arises from hybrid structures that combine noble metal nanostructures with semiconductor components, such as chalcopyrite (CuFeS2) nanocrystals (NCs), which by themselves support quasistatic resonances. In this work, we use a hybrid membrane to integrate Au nanorods (NRs) with a longitudinal LSPR at 745 nm and CuFeS2 NCs with a resonance peak at 490 nm into water-stable nanocomposites for robust and bifunctional photocatalysis of oxygen and hydrogen evolution reactions in a wavelength-dependent manner. Excitation of NRs or NCs in the nanocomposite correlates with increased hydrogen or oxygen evolution, respectively, consistent with a light-driven electron transfer between the metal and semiconductor building blocks, the direction of which depends on the wavelength. The bifunctional photoreactivity of the nanocomposite is enhanced by Cu(I)/Cu(II)-assisted catalysis on the surface of the NCs.

Enhanced Photocatalytic Oxidation of RhB and MB Using Plasmonic Performance of Ag Deposited on Bi2WO6

Visible-light-driven heterostructure Ag/Bi2WO6 nanocomposites were prepared using a hydrothermal method followed by the photodeposition of Ag on Bi2WO6. A photocatalyst with a different molar ratio of Ag to Bi2WO6 (1:1, 1:2 and 2:1) was prepared. The catalytic performance of Ag/Bi2WO6 towards the photocatalytic oxidation of rhodamine B (RhB) and methylene blue (MB) was explored. Interestingly, the Ag/Bi2WO6 (1:2) catalyst exhibited superior performance; it oxidized 83% of RhB to Rh-110 and degraded 68% of MB in 90 min. This might be due to the optimum amount of Ag nanoparticles, which supported the rapid generation and transfer of separated charges from Bi2WO6 to Ag through the Schottky barrier. An excess of Ag on Bi2WO6 (1:1 and 2:1) blocked the active sites of the reaction and did not produce the desired result. The introduction of Ag on Bi2WO6 improved the electrical conductivity of the composite and lowered the recombination rate of charge carriers. Our work provides a cost-effective route for constructing high-performance catalysts for the degradation of toxic dyes.

Shape Modulation of Plasmonic Nanostructures by Unconventional Lithographic Technique

Conventional nano-sphere lithography techniques have been extended to the fabrication of highly periodic arrays of sub-wavelength nanoholes in a thin metal film. By combining the dry etching processes of self-assembled monolayers of polystyrene colloids with metal physical deposition, the complete transition from increasing size triangular nanoprism to hexagonally distributed nanoholes array onto thin metal film has been gradually explored. The investigated nano-structured materials exhibit interesting plasmonic properties which can be precisely modulated in a desired optical spectral region. An interesting approach based on optical absorbance measurements has been adopted for rapid and non-invasive inspections of the nano-sphere monolayer after the ion etching process. By enabling an indirect and accurate evaluation of colloid dimensions in a large area, this approach allows the low-cost and reproducible fabrication of plasmonic materials with specifically modulated optical properties suitable for many application in biosensing devices or Raman enhanced effects.

Dual Enhancement of Carrier Generation and Migration on Au/g-C3N4 photocatalysts for High-Efficient Broadband PET-RAFT Polymerization

Photo-induced electron/energy transfer RAFT (PET-RAFT) polymerization can produce well-defined polymers with spatio-temporal control. Semiconductor graphitic carbon nitride (g-C3N4) as thermally and chemically stable photocatalyst, has achieved PET-RAFT method under UV-irradiation...

Plasmonic Photoelectrochemistry: In View of Hot Carriers

Utilizing plasmon-generated hot carriers to drive chemical reactions has emerged as a popular topic in solar photocatalysis. However, a complete description of the underlying mechanism of hot-carrier transfer in photochemical processes remains elusive, particularly for those involving hot holes. Photoelectrochemistry enables to localize hot holes on photoanodes and hot electrons on photocathodes and thus offers an approach to separately explore the hole-transfer dynamics and electron-transfer dynamics. This review summarizes a comprehensive understanding of both hot-hole and hot-electron transfers from photoelectrochemical studies on plasmonic electrodes. Additionally, working principles and applications of spectroelectrochemistry are discussed for plasmonic materials. It is concluded that photoelectrochemistry provides a powerful toolbox to gain mechanistic insights into plasmonic photocatalysis.

Plasmonic Coupling Architectures for Enhanced Photocatalysis

Plasmonic photocatalysis is a promising approach for solar energy transformation. Comparing with isolated metal nanoparticles, the plasmonic coupling architectures can provide further strengthened local electromagnetic field and boosted light-harvesting capability through optimal control over the composition, spacing, and orientation of individual nanocomponents. As such, when integrated with semiconductor photocatalysts, the coupled metal nanostructures can dramatically promote exciton generation and separation through plasmonic-coupling-driven charge/energy transfer toward superior photocatalytic efficiencies. Herein, the principles of the plasmonic coupling effect are presented and recent progress on the construction of plasmonic coupling architectures and their integration with semiconductors for enhanced photocatalytic reactions is summarized. In addition, the remaining challenges as to the rational design and utilization of plasmon coupling structures are elaborated, and some prospects to inspire new opportunities on the future development of plasmonic coupling structures for efficient and sustainable light-driven reactions are raised.

Enhanced solar water splitting using plasmon-induced resonance energy transfer and unidirectional charge carrier transport

Solar water splitting by photoelectrochemical (PEC) reactions is promising for hydrogen production. The gold nanoparticles (AuNPs) are often applied to promote the visible response of wideband photocatalysts. However, in a typical TiO₂/AuNPs structure, the opposite transfer direction of excited electrons between AuNPs and TiO₂ under visible light and UV light severely limits the solar PEC performance. Here we present a unique Pt/TiO₂/Cu₂O/NiO/AuNPs photocathode, in which the NiO hole transport layer (HTL) is inserted between AuNPs and Cu₂O to achieve unidirectional transport of charge carriers and prominent plasmon-induced resonance energy transfer (PIRET) between AuNPs and Cu₂O. The measured applied bias photon-to-current efficiency and the hydrogen production rate under AM 1.5G illumination can reach 1.5% and 16.4 μmol·cm^-2·h^-1, respectively. This work is original in using the NiO film as the PIRET spacer and provides a promising photoelectrode for energy-efficient solar water splitting.

Structures, plasmon-enhanced luminescence, and applications of heterostructure phosphors

Heterostructure phosphor composites have been used widely in the fields of targeted bio-probes and bio-imaging, hyperthermia treatment, photocatalysis, solar cells, and fingerprint identification. The structures, plasmon-enhanced luminescence and mechanism of metal/fluorophore heterostructure composites, such as core-shell nanocrystals, multilayers, adhesion, islands, arrays, and composite optical glass, are reviewed in detail. Their extended applications were explored widely since the surface plasmon resonance effect increased the up-conversion efficiency of fluorophores significantly. We summarize their synthesis methods, size and shape control, absorption and excitation spectra, plasmon-enhanced up-conversion luminescence, and specific applications. The most important results acquired in each case are summarized, and the main challenges that need to be overcome are discussed.

Nanoarray Structures for Artificial Photosynthesis

Conversion and storage of solar energy into fuels and chemicals by artificial photosynthesis has been considered as one of the promising methods to address the global energy crisis. However, it is still far from the practical applications on a large scale. Nanoarray structures that combine the advantages of nanosize and array alignment have demonstrated great potential to improve solar energy conversion efficiency, stability, and selectivity. This article provides a comprehensive review on the utilization of nanoarray structures in artificial photosynthesis of renewable fuels and high value-added chemicals. First, basic principles of solar energy conversion and superiorities of using nanoarray structures in this field are described. Recent research progress on nanoarray structures in both abiotic and abiotic-biotic hybrid systems is then outlined, highlighting contributions to light absorption, charge transport and transfer, and catalytic reactions (including kinetics and selectivity). Finally, conclusions and outlooks on future research directions of nanoarray structures for artificial photosynthesis are presented.

Enhancing Photoelectric Response of an Au@Ag/AgI Schottky Contact through Regulation of Localized Surface Plasmon Resonance

Carrier generation and migration are both pivotal to photoelectric (PE) response. Formation of a Schottky contact is conducive to promote carrier migration but cannot fundamentally magnify carrier generation, limiting the eventual PE performance. In this work, an Au@Ag/AgI Schottky contact is established by in situ growth of AgI nanotriangles on the surface of Au@Ag nanoparticles (NPs), and PE enhancement of the Schottky contact is realized by regulating localized surface plasmon resonance (LSPR) properties. In comparison with Ag/AgI Schottky contact, assembly of Au NPs in the center of Ag NPs adjusts the dominated LSPR property from hot-electron transfer (HET) to plasmon-induced resonance energy transfer (PIRET). With the concurrent manipulation of HET and PIRET, additional energy can be employed for carrier generation, while photogenerated electrons offset by hot electrons are reduced, which jointly enlarges PE responses of the Au@Ag/AgI Schottky contact up to 4 times. Benefitted from the etching of thiols to Ag-based materials, the Au@Ag/AgI Schottky contact is further applied to the construction of a photoelectrochemical cysteine sensor. This work proposes a general strategy to enhance PE responses of Schottky contacts, which may advance the design of LSPR-related PE systems.

Modulating the 0D/2D Interface of Hybrid Semiconductors for Enhanced Photoelectrochemical Performances

Photoelectrochemical (PEC) solar-driven hydrogen production is a promising route to convert solar energy into chemical energy using semiconductors as active materials. However, the performance is still far from satisfactory due to a limited absorption range and rapid charge recombination. Compared to 3D semiconductors, 0D/2D nanohybrids may exhibit better PEC performance, due to the formation of an intimate interface between the two semiconductors that can inhibit carrier recombination. Herein, a photoelectrode based on a 0D/2D heterojunction is constructed by 0D metal chalcogenide quantum dots (QDs) and hierarchical 2D Zn-MoS₂ nanosheets (NSs). The effect of PbS, CdS, and their composite PbS@CdS QDs is analyzed by depositing them onto Zn-MoS₂ NSs using an in situ process. This distinctive heterojunction can leverage the light harvesting capabilities of QDs with the catalytic performance of Zn-MoS₂ . Compared to Zn-MoS₂ , Zn-MoS₂ /PbS, and Zn-MoS₂ /CdS, the obtained 0D/2D heterostructure based on the composite Zn-MoS₂ /PbS@CdS has a significantly enhanced photocurrent. The synergistic effect between 0D/2D heterojunction, the extended absorption range of QDs, and the strong coupling and band alignment between them lead to superior solar-driven PEC performance. This work can provide a new platform to construct multifunctional 0D/2D nanohybrids for optoelectronic applications, not limited to PEC devices.

NiFeOx decorated Ge-hematite/perovskite for an efficient water splitting system

To boost the photoelectrochemical water oxidation performance of hematite photoanodes, high temperature annealing has been widely applied to enhance crystallinity, to improve the interface between the hematite-substrate interface, and to introduce tin-dopants from the substrate. However, when using additional dopants, the interaction between the unintentional tin and intentional dopant is poorly understood. Here, using germanium, we investigate how tin diffusion affects overall photoelectrochemical performance in germanium:tin co-doped systems. After revealing that germanium is a better dopant than tin, we develop a facile germanium-doping method which suppresses tin diffusion from the fluorine doped tin oxide substrate, significantly improving hematite performance. The NiFeOx@Ge-PH photoanode shows a photocurrent density of 4.6 mA cm-2 at 1.23 VRHE with a low turn-on voltage. After combining with a perovskite solar cell, our tandem system achieves 4.8% solar-to-hydrogen conversion efficiency (3.9 mA cm-2 in NiFeOx@Ge-PH/perovskite solar water splitting system). Our work provides important insights on a promising diagnostic tool for future co-doping system design.