Magneto-fluorescent core-shell supernanoparticles

Bi-magnetic Mn3O4@Ni core-shell binary superparticles: Self-assembly preparation and magnetic behaviors

Binary superparticles formed by self-assembling two different types of nanoparticles may utilize the synergistic interactions and create advanced multifunctional materials. Bi-magnetic superparticles with a core-shell structure have unique properties due to their specific spatial configurations. Herein, we built Mn3O4@Ni core-shell binary superparticles via an emulsion self-assembly technique. The superparticles are generated with a spherical morphology, and have a typical average size of about 240 nm. By altering the ratio of the two magnetic nanoparticles, the thickness of Ni shells can be adjusted. Oleic acid ligands are crucial for the formation of core-shell structure. Magnetic analysis suggests that core-shell superparticles display dual-phase magnetic interactions, contrasting with the single-phase magnetic behaviors of commonly core-shell magnetic nanoparticles. The calculation on the effective magnetic anisotropy constants indicates that the presence of Ni shell layers reduces the dipole interactions among the Mn3O4 core particles. Due to the presence of Ni nanoparticle shells, the blocking temperature of Mn3O4 is reduced, while the Curie temperature of Mn3O4 is independent on Ni content. Tunable magnetic properties can be achieved by modulating the Ni nanoparticle shell thickness. This study offers insights for the development of core-shell superparticles with varied magnetic characteristics.

Emergent Properties from Three-Dimensional Assemblies of (Nano)particles in Confined Spaces

The assembly of (nano)particles into compact hierarchical structures yields emergent properties not found in the individual constituents. The formation of these structures relies on a profound knowledge of the nanoscale interactions between (nano)particles, which are often designed by researchers aided by computational studies. These interactions have an effect when the (nano)particles are brought into close proximity, yet relying only on diffusion to reach these closer distances may be inefficient. Recently, physical confinement has emerged as an efficient methodology to increase the volume fraction of (nano)particles, rapidly accelerating the time scale of assembly. Specifically, the high surface area of droplets of one immiscible fluid into another facilitates the controlled removal of the dispersed phase, resulting in spherical, often ordered, (nano)particle assemblies. In this review, we discuss the design strategies, computational approaches, and assembly methods for (nano)particles in confined spaces and the emergent properties therein, such as trigger-directed assembly, lasing behavior, and structural photonic color. Finally, we provide a brief outlook on the current challenges, both experimental and computational, and farther afield application possibilities.

A Ligand-Directed Spatial Regulation to Structural and Functional Tunability in Aggregation-Induced Emission Luminogen-Functionalized Organic-Inorganic Nanoassemblies

Aggregation-induced emission luminogen (AIEgen)-functionalized organic-inorganic hybrid nanoparticles (OINPs) are an emerging category of multifunctional nanomaterials with vast potential applications. The spatial arrangement and positioning of AIEgens and inorganic compounds in AIEgen-functionalized OINPs determine the structures, properties, and functionalities of the self-assembled nanomaterials. In this work, a facile and general emulsion self-assembly tactic for synthesizing well-defined AIEgen-functionalized OINPs is proposed by coassembling alkane chain-functionalized inorganic nanoparticles with hydrophobic organic AIEgens. As a proof of concept, the self-assembly and structural evolution of plasmonic-fluorescent hybrid nanoparticles (PFNPs) from concentric circle to core shell and then to Janus structures is demonstrated by using alkane chain-modified AuNPs and AIEgens as building blocks. The spatial position of AuNPs in the signal nanocomposite is controlled by varying the alkane ligand length and density on the AuNP surface. The mechanism behind the formation of various PFNP nanostructures is also elucidated through experiments and theoretical simulation. The obtained PFNPs with diverse structures exhibit spatially tunable optical and photothermal properties for advanced applications in multicolor and multimode immunolabeling and photothermal sterilization. This work presents an innovative synthetic approach of constructing AIEgen-functionalized OINPs with diverse structures, compositions, and functionalities, thereby championing the progressive development of these OINPs.

Multihierarchical Regulation To Achieve Quantum Dot Nanospheres with a Photoluminescence Quantum Yield Close to 100

Quantum dots (QDs) exhibit superior brightness and photochemical stability, making them the preferred option for highly sensitive single-molecule detection compared with fluorescent dyes or proteins. Nevertheless, their high surface energy leads to nonspecific adsorption and poor colloidal stability. In the past decades, we have found that QD-based fluorescent nanoparticles (FNs) can not only address these limitations but also enhance detection sensitivity. However, the photoluminescence quantum yield (PLQY) of FNs is significantly lower compared with that of original QDs. It is urgent to develop a strategy to solve the issue, aiming to further enhance detection sensitivity. In this study, we found that the decrease of PLQY of FNs prepared by free radical polymerization was attributed to two factors: (1) generation of defects that can cause nonradiative transitions resulting from QD-ligands desorption and QD-shell oxidation induced by free radicals; (2) self-absorption resulting from aggregation caused by incompatibility of QDs with polymers. Based on these, we proposed a multihierarchical regulation strategy that includes: (1) regulating QD-ligands; (2) precisely controlling free radical concentration; and (3) constructing cross-linked structures of polymer to improve compatibility and to reduce the formation of surface defects. It is crucial to emphasize that the simultaneous coordination of multiple factors is essential. Consequently, a world-record PLQY of 97.6% for FNs was achieved, breaking through the current bottleneck at 65%. The flexible application of this regulatory concept paves the way for the large-scale production of high-brightness QD-polymer complexes, enhancing their potential applications in sensitive biomedical detection.

Icosahedral supracrystal assembly from polymer-grafted nanoparticles via interplay of interfacial energy and confinement effect

Self-assembly of nanoparticles (NPs) in drying emulsion droplets paves the way for intricate three-dimensional (3D) superstructures, given the myriad of control parameters for fine-tuning assembly conditions. With their substantial energetic dynamics that are acutely responsive to emulsion confinements, polymeric ligands incorporated into a system can enrich its structural diversity. Here, we demonstrate the assembly of soft polymer-grafted NPs into Mackay icosahedrons beyond spherical body-centered cubic (BCC) packing structures commonly observed for these soft spheres. This behavior is governed by the free energy minimization within emulsions through the interplay of the oil-water interfacial energy and confinement effect as demonstrated by the experimental observations of structural transitions between icosahedrons and BCC crystals and by corresponding free energy calculations. The anisotropic surface of the icosahedral supracrystals provides the capability of guiding the position of a secondary constituent, creating unique hybrid patchy icosahedrons with the potential to develop into multifunctional 3D clusters that combine the benefits of both polymers and conventional colloids.

Magnetic Silica-Coated Fluorescent Microspheres (MagSiGlow) for Simultaneous Detection of Tumor-Associated Proteins

Multiplexed bead assays for solution-phase biosensing often encounter cross-over reactions during signal amplification steps, leading to unwanted false positive and high background signals. Current solutions involve complex custom-designed and costly equipment, limiting their application in simple laboratory setup. In this study, we introduce a straightforward protocol to adapt a multiplexed single-bead assay to standard fluorescence imaging plates, enabling the simultaneous analysis of thousands of reactions per plate. This approach focuses on the design and synthesis of bright fluorescent and magnetic microspheres (MagSiGlow) with multiple fluorescent wavelengths serving as unique detection markers. The imaging-based, single-bead assay, combined with a scripted algorithm, allows the detection, segmentation, and co-localization on average of 7500 microspheres per field of view across five imaging channels in less than one second. We demonstrate the effectiveness of this method with remarkable sensitivity at low protein detection limits (100 pg/mL). This technique showed over 85 % reduction in signal cross-over to the solution-based method after the concurrent detection of tumor-associated protein biomarkers. This approach holds the promise of substantially enhancing high throughput biosensing for multiple targets, seamlessly integrating with rapid image analysis algorithms.

Fluorescence Enhancement of CdS:Ag Quantum Dots Co-Assembled with Au Nanoparticles in a Hollow Nanosphere Form

Colloidal quantum dots (QDs) have exceptional fluorescence properties. Overcoming aggregation-induced quenching and enhancing the fluorescence of colloidal QDs have remained a challenging issue in this field. In this study, composite hollow nanospheres composed of Au nanoparticles (NPs) and CdS:Ag-doped QDs were successfully constructed through controlled microemulsion-based cooperative assembly. This method harnessed the localized surface plasmon resonance (LSPR) effect of Au NPs nearby doped QDs, resulting in enhanced doped QD fluorescence and the observation of the Purcell effect. The composite hollow nanospheres show a fluorescence enhancement compared to that of the pure CdS:Ag QDs. The enhanced fluorescence was demonstrated to come from the synergetic enhancement of the absorption and emission transition of the doped QDs. This approach provides a feasible technological pathway to address the challenge of improving the fluorescence performance of the doped QDs.

Self-Assembled Preparation of Porous Nickel Phosphide Superparticles with Tunable Phase and Porosity for Efficient Hydrogen Evolution

Self-assembly of colloidal nanoparticles enables the easy building of assembly units into higher-order structures and the bottom-up preparation of functional materials. Nickel phosphides represent an important group of catalysts for hydrogen evolution reaction (HER) from water splitting. In this paper, the preparation of porous nickel phosphide superparticles and their HER efficiencies are reported. Ni and Ni2P nanoparticles are self-assembled into binary superparticles via an oil-in-water emulsion method. After annealing and acid etching, the as-prepared Ni-Ni2P binary superparticles change into porous nickel phosphide superparticles. The porosity and crystalline phase of the superparticles can be tuned by adjusting the ratio of Ni and Ni2P nanoparticles. The resulting porous superparticles are effective in driving HER under acidic conditions, and the modulation of porosity and phase further optimize the electrochemical performance. The prepared Ni3P porous superparticles not only possess a significantly enhanced specific surface area compared to solid Ni-Ni2P superparticles but also exhibit an excellent HER efficiency. The calculations based on the density functional theories show that the (110) crystal facet exhibits a relatively lower Gibbs free energy of hydrogen adsorption. This work provides a self-assembly approach for the construction of porous metal phosphide nanomaterials with tunable crystalline phase and porosity.

Optical Phenomena in Molecule-Based Magnetic Materials

Since the last century, we have witnessed the development of molecular magnetism which deals with magnetic materials based on molecular species, i.e., organic radicals and metal complexes. Among them, the broadest attention was devoted to molecule-based ferro-/ferrimagnets, spin transition materials, including those exploring electron transfer, molecular nanomagnets, such as single-molecule magnets (SMMs), molecular qubits, and stimuli-responsive magnetic materials. Their physical properties open the application horizons in sensors, data storage, spintronics, and quantum computation. It was found that various optical phenomena, such as thermochromism, photoswitching of magnetic and optical characteristics, luminescence, nonlinear optical and chiroptical effects, as well as optical responsivity to external stimuli, can be implemented into molecule-based magnetic materials. Moreover, the fruitful interactions of these optical effects with magnetism in molecule-based materials can provide new physical cross-effects and multifunctionality, enriching the applications in optical, electronic, and magnetic devices. This Review aims to show the scope of optical phenomena generated in molecule-based magnetic materials, including the recent advances in such areas as high-temperature photomagnetism, optical thermometry utilizing SMMs, optical addressability of molecular qubits, magneto-chiral dichroism, and opto-magneto-electric multifunctionality. These findings are discussed in the context of the types of optical phenomena accessible for various classes of molecule-based magnetic materials.

2D Film-Like Magnetic SERS Tag with Enhanced Capture and Detection Abilities for Immunochromatographic Diagnosis of Multiple Bacteria

Here, a multiplex surface-enhanced Raman scattering (SERS)-immunochromatography (ICA) platform is presented using a graphene oxide (GO)-based film-like magnetic tag (GFe-DAu-D/M) that effectively captures and detects multiple bacteria in complex specimens. The 2D GFe-DAu-D/M tag with universal bacterial capture ability is fabricated through the layer-by-layer assembly of one layer of small Fe3O4 nanoparticles (NPs) and two layers of 30 nm AuNPs with a 0.5 nm built-in nanogap on monolayer GO nanosheets followed by co-modification with 4-mercaptophenylboronic acid (MPBA) and 5,5'-dithiobis-(2-nitrobenzoic acid).The GFe-DAu-D/M enabled the rapid enrichment of multiple bacteria by MPBA and quantitative analysis of target bacteria on test lines by specific antibodies, thus achieving multiple signal amplification of magnetic enrichment effect and multilayer dense hotspots and eliminating matrix interference in real-world applications. The developed technology can directly and simultaneously diagnose three major pathogens (Staphylococcus aureus, Pseudomonas aeruginosa, and Salmonella typhimurium) with detection limits down to the level of 10 cells mL-1. The good performance of the proposed method in the detection of real urinary tract infection specimens is also demonstrated, suggesting the great potential of the GFe-DAu-D/M-ICA platform for the highly sensitive monitoring of bacterial infections or contamination.

Size Segregation of Gold Nanoparticles into Bilayer-like Vesicular Assembly

Size segregation of nanoparticles with different sizes into highly ordered, unique nanostructures is important for their practical applications. Herein, we demonstrate spontaneous self-assembly of the binary mixtures of small and large gold nanoparticles (GNPs; 5/15, 5/20, or 10/20 in diameter) in the presence of a tetra(ethylene glycol)-terminated octafluoro-4,4'-biphenol ligand, namely, TeOFBL, resulting in a size-segregated assembly. The outer single layer of large GNPs forming a gold nanoparticle vesicle (GNV) encapsulated the inner vesicle-like assembly composed of small GNPs, which is referred to as bilayer-like GNV and similar to the molecular bilayer structure of a liposome. The size segregation was driven by the solvophobic feature of the TeOFBLs on the surface of GNPs. A time-course study indicated that size segregation occurred instantaneously during the mixing stage of the self-organization process. The size-segregated precursors quickly fused with each other through the inner-inner and outer-outer layer fashion to form the bilayer-like GNV. This study provides a new approach to creating biomimetic bilayer capsules with different physical properties for potential applications such as surface-enhanced Raman scattering and drug delivery.

Dextran-Functionalized Super-nanoparticle Assemblies of Quantum Dots for Enhanced Cellular Immunolabeling and Imaging

Colloidal semiconductor quantum dots (QDs) are a popular material for applications in bioanalysis and imaging. Although individual QDs are bright, some applications benefit from the use of even brighter materials. One approach to achieve higher brightness is to form super-nanoparticle (super-NP) assemblies of many QDs. Here, we present the preparation, characterization, and utility of dextran-functionalized super-NP assemblies of QDs. Amphiphilic dextran was synthesized and used to encapsulate many hydrophobic QDs via a simple emulsion-based method. The resulting super-NP assemblies or "super-QDs" had hydrodynamic diameters of ca. 90-160 nm, were characterized at the ensemble and single-particle levels, had orders-of-magnitude superior brightness compared to individual QDs, and were non-blinking. Additionally, binary mixtures of red, green, and blue (RGB) colors of QDs were used to prepare super-QDs, including colors difficult to obtain from individual QDs (e.g., magenta). Tetrameric antibody complexes (TACs) enabled simple antibody conjugation for selective cellular immunolabeling and imaging with both an epifluorescence microscope and a smartphone-based platform. The technical limitations of the latter platform were overcome by the increased per-particle brightness of the super-QDs, and the super-QDs outperformed individual QDs in both cases. Overall, the super-QDs are a very promising material for bioanalysis and imaging applications where brightness is paramount.

Modulation of macrophage polarization by iron-based nanoparticles

Macrophage polarization is an essential process involved in immune regulation. In response to different microenvironmental stimulation, macrophages polarize into cells with different phenotypes and functions, most typically M1 (pro-inflammatory) and M2 (anti-inflammatory) macrophages. Iron-based nanoparticles have been widely explored and reported to regulate macrophage polarization for various biomedical applications. However, the influence factors and modulation mechanisms behind are complicated and not clear. In this review, we systemically summarized different iron-based nanoparticles that regulate macrophage polarization and function and discussed the influence factors and mechanisms underlying the modulation process. This review aims to deepen the understanding of the modulation of macrophage polarization by iron-based nanoparticles and expects to provide evidence and guidance for subsequent design and application of iron-based nanoparticles with specific macrophage modulation functions.

Microfluidic synthesis of monodisperse and size-tunable CsPbBr3 supraparticles

The highly controlled, microfluidic template-assisted self-assembly of CsPbBr₃ nanocrystals into spherical supraparticles is presented, achieving precise control over average supraparticle size through the variation of nanocrystal concentration and droplet size; thus facilitating the synthesis of highly monodisperse, sub-micron supraparticles (with diameters between 280 and 700 nm).

Bioimaging Probes Based on Magneto-Fluorescent Nanoparticles

Novel nanomaterials are of interest in biology, medicine, and imaging applications. Multimodal fluorescent-magnetic nanoparticles demand special attention because they have the potential to be employed as diagnostic and medication-delivery tools, which, in turn, might make it easier to diagnose and treat cancer, as well as a wide variety of other disorders. The most recent advancements in the development of magneto-fluorescent nanocomposites and their applications in the biomedical field are the primary focus of this review. We describe the most current developments in synthetic methodologies and methods for the fabrication of magneto-fluorescent nanocomposites. The primary applications of multimodal magneto-fluorescent nanoparticles in biomedicine, including biological imaging, cancer treatment, and drug administration, are covered in this article, and an overview of the future possibilities for these technologies is provided.

Self-assembling ferrimagnetic fluorescent micelles for bioimaging guided efficient magnetic hyperthermia therapy

Multifunctional magnet-fluorescent nanocomposites are widely applied in biomedical applications. Incorporating biocompatible quantum dots with highly ferrimagnetic magnetic nanoparticles into one nanoplatform for achieving efficient magnetic hyperthermia therapy (MHT) is very important. Herein, we reported an amphiphilic block copolymer with a flowable hydrophobic chain to encapsulate highly ferrimagnetic magnetic nanoparticles and ZnS/InP quantum dots via a facile self-assembly method. The obtained ferrimagnetic fluorescent micelle (FMFM) exhibited a uniform diameter of about 180 nm. In stark contrast, larger aggregation (400 nm in diameter) inevitably occurred using common poly(D,L-lactide) (PLA)-based amphiphilic block copolymer with a rigid hydrophobic chain, which was readily cleared by the reticuloendothelial system (RES). The flowable FMFM exhibited long-term colloidal stability within one month and desired fluorescent stability within 84 h. Benefiting from the high ferrimagnetism, the FMFM revealed excellent magnetic heating effect and magnetic resonance imaging capability. With accurate manipulation under an external magnetic field, FMFM realized in vitro enhanced fluorescence imaging sensitivity and accumulation efficiency at the tumor region, achieving in vitro and vivo improved MHT efficacy.

The Effects of Carbon Dots from Hordei Fructus Germinatus Carbonisatus on Glycometabolism and α-Glycosidase Activity

Hordei Fructus Germinatus Carbonisatus (HFC), the carbonized malt known as Maiya-tan in China, has been used as an effective natural treatment to improve digestion for a long time. In this research, we separated and distinguished CDs (carbon dots) from HFC, which were prepared using traditional methods. The HFC CDs had a lattice spacing of 0.26 nm and an average size of 4.3 nm, according to morphology investigations, which revealed that they were nearly spherical. The significant elements in the HFC CDs were C, O, and N. These HFC CDs produced several emissive traps between π − π* states because they had functional groups including C–OH, –NH, C=O, and C–H on their surface, according to X-ray photoelectron spectroscopy investigation. Our results indicated that HFC CDs could effectively reduce postprandial blood glucose and inhibit α-glycosidase in vitro, which suggested that HFC CDs may affect aspects of carbohydrate metabolism. This work indicates that HFC CDs may have the potential to play a crucial clinical role in regulating blood sugar.

Modulation of Nano-superstructures and Their Optical Properties

Self-assembly, which enables spontaneous arrangement of objects, is of particular importance for nanomaterials in both fundamental and applied research fields. Multiple types of nanoparticle superstructures have been successfully built in highly controllable and efficient manners through balancing the nanoscale interactions. Uniform and proper arrangement of nanoparticles inside the assembled superstructures is essential to exhibit their constant, reliable, and homogeneous functionalities. To be specific, the long-range ordered superlattices not only succeed with their building blocks' intrinsic property, but also, more importantly, can display collective properties that are absent both in individual nanoparticles and in their bulk states. One of the most attractive aspects of nanomaterials is their exceptional optical properties that have tremendous application potential in multidisciplinary fields. In this regard, constructing the superstructures from optical nano units like noble metal nanostructures, semiconductor nanoparticles, or hybrid nanomaterials is critical for attaining the unique optical properties and exploring their practical applications in multiple fields including photonics, optoelectronics, optical sensing, photocatalysis, etc. In this Account, we provide guidelines for self-assembly strategies to fabricate the superstructures and discuss the optical properties that the superstructures display. In the first part, we categorize and discuss the key factors that strongly affect the self-assembly process and determine the configurational and integral quality of the superstructures. On one hand, the diversity and designability of nanoparticles offer the intrinsic complexity of the building blocks, including geometry, size, composition, and surface ligand, which efficiently tailors the assembly process and superstructure configuration. On the other hand, multiple factors originating from the introduction of extrinsic features are recognized to facilitate the metastable or dynamic self-assembly process. Such extrinsic features include both matter like DNA origami, peptides, small molecules, etc. and nonmatter involved with electric fields, magnetic fields, light, temperature, etc. In the second part, we introduce the state-of the art progress on the collective optical performances of the assembled superstructures, including (1) chiral optics, such as circular dichroism and circularly polarized luminescence, (2) plasmonic properties and related applications, and (3) luminescence related optics and their applications. Finally, we summarize the existing problems and main challenges briefly, and some future directions of this field are proposed. We envision that, with deep understanding of the assembly mechanism and development of the synthetic and surface chemistry, rational modulation of nanoassemblies will be the trend of this field, which is beneficial to achieve the emerging collective performances and create new generation devices with advanced functions.

Fluorescent Single-Core and Multi-Core Nanoprobes as Cell Trackers and Magnetic Nanoheaters

Iron oxide magnetic nanoparticles (MNPs) have been widely studied due to their versatility for diagnosis, tracking (magnetic resonance imaging (MRI)) and therapeutic (magnetic hyperthermia and drug delivery) applications. In this work, iron oxide MNPs with different single-core (8–40 nm) and multi-core (140–200 nm) structures were synthesized and functionalized by organic and inorganic coating materials, highlighting their ability as magnetic nanotools to boost cell biotechnological procedures. Single core Fe3O4@PDA, Fe3O4@SiO2-FITC-SiO2 and Fe3O4@SiO2-RITC-SiO2 MNPs were functionalized with fluorescent components with emission at different wavelengths, 424 nm (polydopamine), 515 (fluorescein) and 583 nm (rhodamine), and their ability as transfection and imaging agents was explored with HeLa cells. Moreover, different multi-core iron oxide MNPs (Fe3O4@CS, Fe3O4@SiO2 and Fe3O4@Citrate) coated with organic (citrate and chitosan, CS) and inorganic (silica, SiO2) shells were tested as efficient nanoheaters for magnetic hyperthermia applications for mild thermal heating procedures as an alternative to simple structures based on single-core MNPs. This work highlights the multiple abilities offered by the synergy of the use of external magnetic fields applied on MNPs and their application in different biomedical approaches.

Mismatched ligand density enables ordered assembly of mixed-dimensional, cross-species materials

The ordered coassembly of mixed-dimensional species-such as zero-dimensional (0D) nanocrystals and 2D microscale nanosheets-is commonly deemed impracticable, as phase separation almost invariably occurs. Here, by manipulating the ligand grafting density, we achieve ordered coassembly of 0D nanocrystals and 2D nanosheets under standard solvent evaporation conditions, resulting in macroscopic, freestanding hybrid-dimensional superlattices with both out-of-plane and in-plane order. The key to suppressing the notorious phase separation lies in hydrophobizing nanosheets with molecular ligands identical to those of nanocrystals but having substantially lower grafting density. The mismatched ligand density endows the two mixed-dimensional components with a molecular recognition-like capability, driving the spontaneous organization of densely capped nanocrystals at the interlayers of sparsely grafted nanosheets. Theoretical calculations reveal that the intercalation of nanocrystals can substantially reduce the short-range repulsions of ligand-grafted nanosheets and is therefore energetically favorable, while subsequent ligand-ligand van der Waals attractions induce the in-plane order and kinetically stabilize the laminate superlattice structure.

Engineering gold-platinum core-shell nanoparticles by self-limitation in solution

Core-shell particles with thin noble metal shells represent an attractive material class with potential for various applications ranging from catalysis to biomedical and pharmaceutical applications to optical crystals. The synthesis of well-defined core-shell architectures remains, however, highly challenging. Here, we demonstrate that atomically-thin and homogeneous platinum shells can be grown via a colloidal synthesis method on a variety of gold nanostructures ranging from spherical nanoparticles to nanorods and nanocubes. The synthesis is based on the exchange of low binding citrate ligands on gold, the reduction of platinum and the subsequent kinetically hindered growth by carbon monoxide as strong binding ligand. The prerequisites for homogeneous growth are low core-binding ligands with moderate fast ligand exchange in solution, a mild reducing agent to mitigate homonucleation and a strong affinity of a second ligand system that can bind to the shell's surface. The simplicity of the described synthetic route can potentially be adapted to various other material libraries to obtain atomically smooth core-shell systems.

Structural Reconstruction of Cu2 O Superparticles toward Electrocatalytic CO2 Reduction with High C2+ Products Selectivity

Structural reconstruction is a process commonly observed for Cu-based catalysts in electrochemical CO₂ reduction. The Cu-based precatalysts with structural complexity often undergo sophisticated structural reconstruction processes, which may offer opportunities for enhancing the electrosynthesis of multicarbon products (C₂₊ products) but remain largely uncertain due to various new structural features possibly arising during the processes. In this work, the Cu₂ O superparticles with an assembly structure are demonstrated to undergo complicated structure evolution under electrochemical reduction condition, enabling highly selective CO₂ -to-C₂₊ products conversion in electrocatalysis. As revealed by electron microscopic characterization together with in situ X-ray absorption spectroscopy and Raman spectroscopy, the building blocks inside the superparticle fuse to generate numerous grain boundaries while those in the outer shell detach to form nanogap structures that can efficiently confine OH^- to induce high local pH. Such a combination of unique structural features with local reaction environment offers two important factors for facilitating C-C coupling. Consequently, the Cu₂ O superparticle-derived catalyst achieves high faradaic efficiencies of 53.2% for C₂ H₄ and 74.2% for C₂₊ products, surpassing the performance of geometrically simpler Cu₂ O cube-derived catalyst and most reported Cu electrocatalysts under comparable conditions. This work provides insights for rationally designing highly selective CO₂ reduction electrocatalysts by controlling structural reconstruction.

A K+-sensitive AND-gate dual-mode probe for simultaneous tumor imaging and malignancy identification

Although molecular imaging probes have the potential to non-invasively diagnose a tumor, imaging probes that can detect a tumor and simultaneously identify tumor malignancy remain elusive. Here, we demonstrate a potassium ion (K⁺) sensitive dual-mode nanoprobe (KDMN) for non-invasive tumor imaging and malignancy identification, which operates via a cascaded ‘AND’ logic gate controlled by inputs of magnetic resonance imaging (MRI) and fluorescence imaging (FI) signals. We encapsulate commercial K⁺ indicators into the hollow cavities of magnetic mesoporous silica nanoparticles, which are subsequently coated with a K⁺-selective membrane that exclusively permits the passage of K⁺ while excluding other cations. The KDMN can readily accumulate in tumors and enhance the MRI contrast after systemic administration. Spatial information of the tumor lesion is thus accessible via MRI and forms the first layer of the ‘AND’ gate. Meanwhile, the KDMN selectively captures K⁺ and prevents interference from other cations, triggering a K⁺-activated FI signal as the second layer of the ‘AND’ gate in the case of a malignant tumor with a high extracellular K⁺ level. This dual-mode imaging approach effectively eliminates false positive or negative diagnostic results and allows for non-invasive imaging of tumor malignancy with high sensitivity and accuracy.

Impact of RAFT chain transfer agents on the polymeric shell density of magneto-fluorescent nanoparticles and their cellular uptake

The impact of nanoparticle surface chemistry on cell interactions and especially cell uptake has become evident over the last few years in nanomedicine. Since PEG polymers have proved to be ideal tools for attaining stealthiness and favor escape from the in vivo mononuclear phagocytotic system, the accurate control of their geometry is of primary importance and can be achieved through reversible addition-fragmentation transfer (RAFT) polymerization. In this study, we demonstrate that the residual groups of the chain transfer agents (CTAs) introduced in the main chain exert a significant impact on the cellular internalization of functionalized nanoparticles. High-resolution magic angle spinning ¹H NMR spectroscopy and fluorescence spectroscopy permitted by the magneto-fluorescence properties of nanoassemblies (NAs) revealed the compaction of the PEG comb-like shell incorporating CTAs with a long alkyl chain, without changing the overall surface potential. As a consequence of the capability of alkyl units to self-assemble at the NA surface while hardly contributing more than 0.5% to the total polyelectrolyte weight, denser PEGylated NAs showed notably less internalization in all cells of the tumor microenvironment (tumor cells, macrophages and healthy cells). Interestingly, such differentiated uptake is also observed between pro-inflammatory M1-like and immunosuppressive M2-like macrophages, with the latter more efficiently phagocytizing NAs coated with a less compact PEGylated shell. In contrast, the NA diffusion inside multicellular spheroids, used to mimic solid tumors, appeared to be independent of the NA coating. These results provide a novel effort-saving approach where the sole variation of the chemical nature of CTAs in RAFT PEGylated polymers strikingly modulate the cell uptake of nanoparticles upon the organization of their surface coating and open the pathway toward selectively addressing macrophage populations for cancer immunotherapy.

Magnetic Fluorescent Quantum Dots Nanocomposites in Food Contaminants Analysis: Current Challenges and Opportunities

The presence of food contaminants can cause foodborne illnesses, posing a severe threat to human health. Therefore, a rapid, sensitive, and convenient method for monitoring food contaminants is eagerly needed. The complex matrix interferences of food samples and poor performance of existing sensing probes bring significant challenges to improving detection performances. Nanocomposites with multifunctional features provide a solution to these problems. The combination of the superior characteristics of magnetic nanoparticles (MNPs) and quantum dots (QDs) to fabricate magnetic fluorescent quantum dots (MNPs@QDs) nanocomposites are regarded as an ideal multifunctional probe for food contaminants analysis. The high-efficiency pretreatment and rapid fluorescence detection are concurrently integrated into one sensing platform using MNPs@QDs nanocomposites. In this review, the contemporary synthetic strategies to fabricate MNPs@QDs, including hetero-crystalline growth, template embedding, layer-by-layer assembly, microemulsion technique, and one-pot method, are described in detail, and their advantages and limitations are discussed. The recent advances of MNPs@QDs nanocomposites in detecting metal ions, foodborne pathogens, toxins, pesticides, antibiotics, and illegal additives are comprehensively introduced from the perspectives of modes and detection performances. The review ends with current challenges and opportunities in practical applications and prospects in food contaminants analysis, aiming to promote the enthusiasm for multifunctional sensing platform research.

Scalable Production of High-Quality Silver Nanowires via Continuous-Flow Droplet Synthesis

Silver nanowires (Ag NWs) have shown great potential in next-generation flexible displays, due to their superior electronic, optical, and mechanical properties. However, as with most nanomaterials, a limited production capacity and poor reproduction quality, based on the batch reaction, largely hinder their application. Here, we applied continuous-flow synthesis for the scalable and high-quality production of Ag NWs, and built a pilot-scale line for kilogram-level per day production. In addition, we found that trace quantities of water could generate sufficient vapor as a spacer under high temperature to efficiently prevent the back-flow or mixed-flow of the reaction solution. With an optimized synthetic formula, a mass production of pure Ag NWs of 36.5 g/h was achieved by a multiple-channel, continuous-flow reactor.

Using small-angle scattering to guide functional magnetic nanoparticle design

Magnetic nanoparticles offer unique potential for various technological, biomedical, or environmental applications thanks to the size-, shape- and material-dependent tunability of their magnetic properties. To optimize particles for a specific application, it is crucial to interrelate their performance with their structural and magnetic properties. This review presents the advantages of small-angle X-ray and neutron scattering techniques for achieving a detailed multiscale characterization of magnetic nanoparticles and their ensembles in a mesoscopic size range from 1 to a few hundred nanometers with nanometer resolution. Both X-rays and neutrons allow the ensemble-averaged determination of structural properties, such as particle morphology or particle arrangement in multilayers and 3D assemblies. Additionally, the magnetic scattering contributions enable retrieving the internal magnetization profile of the nanoparticles as well as the inter-particle moment correlations caused by interactions within dense assemblies. Most measurements are used to determine the time-averaged ensemble properties, in addition advanced small-angle scattering techniques exist that allow accessing particle and spin dynamics on various timescales. In this review, we focus on conventional small-angle X-ray and neutron scattering (SAXS and SANS), X-ray and neutron reflectometry, gracing-incidence SAXS and SANS, X-ray resonant magnetic scattering, and neutron spin-echo spectroscopy techniques. For each technique, we provide a general overview, present the latest scientific results, and discuss its strengths as well as sample requirements. Finally, we give our perspectives on how future small-angle scattering experiments, especially in combination with micromagnetic simulations, could help to optimize the performance of magnetic nanoparticles for specific applications.

Multifunctional superparamagnetic nanoparticles with a fluorescent silica shell for the in vitro study of bio-nano interactions at the subcellular scale

Despite the high level of interest in bio-nano interactions, detailed intracellular mechanisms that govern nanoscale recognition and signalling still need to be unravelled. Magnetic nanoparticles (NPs) are valuable tools for elucidating complex intracellular bio-nano interactions. Using magnetic NPs, it is possible to isolate cell compartments that the particles interact with during intracellular trafficking. Studies at the subcellular scale rely heavily on optical microscopy; therefore, combining the advantages of magnetic recovery with excellent imaging properties to allow intracellular NP tracking is of utmost interest for the nanoscience field. However, it is a challenge to prepare highly magnetic NPs with a suitable fluorescence for the fluorescence imaging techniques typically used for biological studies. Here we present the synthesis of biocompatible multifunctional superparamagnetic multicore NPs with a bright fluorescent silica shell. The incorporation of an organic fluorophore in the silica surrounding the magnetic multicore was optimised to enable the particles to be tracked with the most common imaging techniques. To prevent dye loss resulting from silica dissolution in biological environments, which would reduce the time that the particles could be tracked, we added a thin dense encapsulating silica layer to the NPs which is highly stable in biological media. The synthesised multifunctional nanoparticles were evaluated in cell uptake experiments in which their intracellular location could be clearly identified using fluorescence imaging microscopy, even after 3 days. The magnetic properties of the iron oxide core enabled both efficient recovery of the NPs from the intracellular environment and the extraction of cell compartments involved in their intracellular trafficking. Thus, the NPs reported here provide a promising tool for the study of the processes regulating bio-nano interactions.

General Route to Colloidal Nanocrystal Clusters with Precise Hierarchical Control via Star-like Nanoreactors

A colloidal nanocrystal cluster (CNC) is a hierarchical nanostructure formed by clustering several nanocrystals into one nano-ensemble, which may exhibit unique optical or catalytic properties different from individual nanocrystals owing to the mutual interactions among neighboring component nanocrystals. However, there is still no universal synthetic route that could be applicable to diverse material compositions with precisely controlled hierarchical structures (i.e., nanocrystal number density, component nanocrystal size, and overall diameter of the CNC) up to now. Herein, a general and novel synthetic strategy was reported for crafting a wide range of inorganic CNCs (i.e., noble metal, semiconductor, and metal oxide) via utilizing amphiphilic star-like poly(4-vinylpyridine)-block-polystyrene diblock copolymers as nanoreactors prepared by sequential atom transfer radical polymerization. The hierarchical structure of rationally designed CNCs could be readily tailored by varying the P4VP molecular weight of star-like nanoreactors and the parameter optimization during the CNC preparation process, which was inaccessible by conventional synthetic methods.

A quantum dot microspheres-based highly specific and sensitive three-dimensional microarray for multiplexed detection of inflammatory factors

The development trend ofin vitrodiagnostics is to obtain various biological information from a sample at extremely low concentration and volume, which has promoted its progress in accurate and sensitive multiplexed detection. Here, we developed a single color quantum dot (QD) based three-dimensional (3D) structure matrix microarray and conducted the detection of two inflammatory factors (C-reactive protein (CRP) and serum amyloid A (SAA)) by a self-built fluorescence detection system. This strategy increased detection sensitivity by immobilizing the antibody specifically on the 3D substrate because it captured more than about 7 times of 'effective' antibodies compared to the two-dimensional (2D) plane. Compared to the dual QDs-2D fluorescence-linked immunosorbent assay, the limit of detection (LOD) of 3D microarray based on QDs modified with amphiphilic polymers has been further improved to 0.11 ng ml^-1for SAA assay and to 0.16 ng ml^-1for CRP assay, respectively. By using QD microspheres (SiO₂@QDs@SiO₂-COOH, containing approximately 200-300 hydrophobic QDs on per SiO₂sphere) as fluorescent labels, the LOD for CRP and SAA of 3D microarray reached as high as 15 pg ml^-1and 86 pg ml^-1, and the sensitivity was further improved by 28-fold and 425-fold, respectively. Because of its excellent performance, this QD microspheres-based 3D microarray has great application potential for highly sensitive and multiplexed quantitative detection of other biomarkers, small molecules, and antibiotic residues in biomedicine and food safety.

Recent Advances in Multimodal Molecular Imaging of Cancer Mediated by Hybrid Magnetic Nanoparticles

Cancer is the second leading cause of death in the world, which is why it is so important to make an early and very precise diagnosis to obtain a good prognosis. Thanks to the combination of several imaging modalities in the form of the multimodal molecular imaging (MI) strategy, a great advance has been made in early diagnosis, in more targeted and personalized therapy, and in the prediction of the results that will be obtained once the anticancer treatment is applied. In this context, magnetic nanoparticles have been positioned as strong candidates for diagnostic agents as they provide very good imaging performance. Furthermore, thanks to their high versatility, when combined with other molecular agents (for example, fluorescent molecules or radioisotopes), they highlight the advantages of several imaging techniques at the same time. These hybrid nanosystems can be also used as multifunctional and/or theranostic systems as they can provide images of the tumor area while they administer drugs and act as therapeutic agents. Therefore, in this review, we selected and identified more than 160 recent articles and reviews and offer a broad overview of the most important concepts that support the synthesis and application of multifunctional magnetic nanoparticles as molecular agents in advanced cancer detection based on the multimodal molecular imaging approach.

In Vitro Cellular Uptake Studies of Self-Assembled Fluorinated Nanoparticles Labelled with Antibodies

Nanoparticles (NPs) functionalized with antibodies (Abs) on their surface are used in a wide range of bioapplications. Whereas the attachment of antibodies to single NPs to trigger the internalization in cells via receptor-mediated endocytosis has been widely studied, the conjugation of antibodies to larger NP assemblies has been much less explored. Taking into account that NP assemblies may be advantageous for some specific applications, the possibility of incorporating targeting ligands is quite important. Herein, we performed the effective conjugation of antibodies onto a fluorescent NP assembly, which consisted of fluorinated Quantum Dots (QD) self-assembled through fluorine-fluorine hydrophobic interactions. Cellular uptake studies by confocal microscopy and flow cytometry revealed that the NP assembly underwent the same uptake procedure as individual NPs; that is, the antibodies retained their targeting ability once attached to the nanoassembly, and the NP assembly preserved its intrinsic properties (i.e., fluorescence in the case of QD nanoassembly).

Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging

Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.

Systematic spectroscopic investigation of structural changes and corona formation of bovine serum albumin over magneto-fluorescent nanoparticles

Magneto-fluorescent nanoparticles have attracted great attention because of their dual nature as multimodal imaging probes in various biomedical applications. Particulary, it is desirable to understand how these nanoparticles interact with human serum proteins before they are used in biological systems. In this work, the physiological interactions between magneto-fluorescent nanoparticles (MFNPs) and bovine serum albumin (BSA) were systematically investigated. The present observations identified that the collision of MFNPs and BSA caused fluorescence quenching of BSA. Steady state fluorescence, lifetime and anisotropy measurements in the presence of MFNPs supported dynamic quenching of the BSA emission. Furthermore, in the presence of MFNPs, the conformation changes in the BSA structure indicate merely the secondary structural changes. The findings demonstrated that random interactions and hydrophobic forces play a major role in the dynamic quenching. Further, subsequent coating of BSA over MFNPs result in protein corona formation, as is evident through spectroscopic measurements. In light of the present work, MFNPs could serve a purpose in magnetic separation and optical detection of serum proteins from blood plasma in real-time disease diagnosis.

Solvophobic-controlled synthesis of smart magneto-fluorescent nanostructures for real-time inspection of metallic fractures

The production of materials that contain more than one functional constituent, the so-called multifunctional materials, is quite relevant in advanced technology. By acting as building blocks, nanoparticles can be suitably explored for generating higher-order multifunctional structures. In this regard, herein, a special clustered magneto-fluorescent superstructure has been developed for non-destructive detection of flaws and shallow subsurface discontinuities in industrial ferromagnetic materials. The strategy consists of the solvophobic-controlled assembly of organic-based maghemite cores and water-based II-VI quantum dots, in the presence of hexadecyltrimethyl-ammonium bromide, CTAB, as a compatibilizer agent. This composite exhibited a high magnetic response (σ _max = 66 emu g^-1) and uniform size, in addition to tunable optical properties (QY = 78%). The strategy of utilizing nanoparticles as magneto-fluorescent nanoprobes to identify tiny slits represents a great advance, for improving the capability of precisely revealing the fracture boundary locations by visual real-time inspection. The nanoscale probes exhibit a low signal-to-noise ratio and a higher competitive performance in relation to the existing micrometric detection systems.

One-pot synthesis of carboxymethyl-dextran coated iron oxide nanoparticles (CION) for preclinical fMRI and MRA applications

Superparamagnetic iron-oxide nanoparticles are robust contrast agents for magnetic resonance imaging (MRI) used for sensitive structural and functional mapping of the cerebral blood volume (CBV) when administered intravenously. To date, many CBV-MRI studies are conducted with Feraheme, manufactured for the clinical treatment of iron-deficiency. Unfortunately, Feraheme is currently not available outside the United States due to commercial and regulatory constraints, making CBV-MRI methods either inaccessible or very costly to achieve. To address this barrier, we developed a simple, one-pot recipe to synthesize Carboxymethyl-dextran coated Iron Oxide Nanoparticles, namely, “CION”, suitable for preclinical CBV-MRI applications. Here we disseminate a step-by-step instruction of our one-pot synthesis protocol, which allows CION to be produced in laboratories with minimal cost. We also characterized different CION-conjugations by manipulating polymer to metal stoichiometric ratio in terms of their size, surface chemistry, and chemical composition, and shifts in MR relaxivity and pharmacokinetics. We performed several proof-of-concept experiments in vivo, demonstrating the utility of CION for functional and structural MRI applications, including hypercapnic CO₂ challenge, visual stimulation, targeted optogenetic stimulation, and microangiography. We also present evidence that CION can serve as a cross-modality research platform by showing concurrent in vivo optical and MRI measurement of CBV using fluorescent-labeled CION. The simplicity and cost-effectiveness of our one-pot synthesis method should allow researchers to reproduce CION and tailor the relaxivity and pharmacokinetics according to their imaging needs. It is our hope that this work makes CBV-MRI more openly available and affordable for a variety of research applications.

Light-Interacting iron-based nanomaterials for localized cancer detection and treatment

To improve the prognosis of cancer patients, methods of local cancer detection and treatment could be implemented. For that, iron-based nanomaterials (IBN) are particularly well-suited due to their biocompatibility and the various ways in which they can specifically target a tumor, i.e. through passive, active or magnetic targeting. Furthermore, when it is needed, IBN can be associated with well-known fluorescent compounds, such as dyes, clinically approved ICG, fluorescent proteins, or quantum dots. They may also be excited and detected using well-established optical methods, relying on scattering or fluorescent mechanisms, depending on whether IBN are associated with a fluorescent compound or not. Systems combining IBN with optical methods are diverse, thus enabling tumor detection in various ways. In addition, these systems provide a wealth of information, which is inaccessible with more standard diagnostic tools, such as single tumor cell detection, in particular by combining IBN with near-field scanning optical microscopy, dark-field microscopy, confocal microscopy or super-resolution microscopy, or the highlighting of certain dynamic phenomena such as the diffusion of a fluorescent compound in an organism, e.g. using fluorescence lifetime imaging, fluorescence resonance energy transfer, fluorescence anisotropy, or fluorescence tomography. Furthermore, they can in some cases be complemented by a therapeutic approach to destroy tumors, e.g. when the fluorescent compound is a drug, or when a technique such as photo-thermal or photodynamic therapy is employed. This review brings forward the idea that iron-based nanomaterials may be associated with various optical techniques to form a commercially available toolbox, which can serve to locally detect or treat cancer with a better efficacy than more standard medical approaches. STATEMENT OF SIGNIFICANCE: New tools should be developed to improve cancer treatment outcome. For that, two closely-related aspects deserve to be considered, i.e. early tumor detection and local tumor treatment. Here, I present various types of iron-based nanomaterials, which can achieve this double objective when they interact with a beam of light under specific and accurately chosen conditions. Indeed, these materials are biocompatible and can be used/combined with most standard microscopic/optical methods. Thus, these systems enable on the one hand tumor cell detection with a high sensitivity, i.e. down to single tumor cell level, and on the other hand tumor destruction through various mechanisms in a controlled and localized manner by deciding whether or not to apply a beam of light and by having these nanomaterials specifically target tumor cells.

BiVO4/Fe3O4@polydopamine superparticles for tumor multimodal imaging and synergistic therapy

Background

Despite tremendous progress has been achieved in tumor theranostic over the past decade, accurate identification and complete eradication of tumor cells remain a great challenge owing to the limitation of single imaging modality and therapeutic strategy.

Results

Herein, we successfully design and construct BiVO₄/Fe₃O₄@polydopamine (PDA) superparticles (SPs) for computed tomography (CT)/photoacoustic (PA)/magnetic resonance (MR) multimodal imaging and radiotherapy (RT)/photothermal therapy (PTT) synergistic therapy toward oral epithelial carcinoma. On the one hand, BiVO₄ NPs endow BiVO₄/Fe₃O₄@PDA SPs with impressive X-ray absorption capability due to the high X-ray attenuation coefficient of Bi, which is beneficial for their utilization as radiosensitizers for CT imaging and RT. On the other hand, Fe₃O₄ NPs impart BiVO₄/Fe₃O₄@PDA SPs with the superparamagnetic property as a T₂-weighted contrast agent for MR imaging. Importantly, the aggregation of Fe₃O₄ NPs in SPs and the presence of PDA shell greatly improve the photothermal conversion capability of SPs, making BiVO₄/Fe₃O₄@PDA SPs as an ideal photothermal transducer for PA imaging and PTT. By integrating advantages of various imaging modalities (CT/PA/MR) and therapeutic strategies (RT/PTT), our BiVO₄/Fe₃O₄@PDA SPs exhibit the sensitive multimodal imaging feature and superior synergistic therapeutic efficacy on tumors.

Conclusions

Since there are many kinds of building blocks with unique properties appropriating for self-assembly, our work may largely enrich the library of nanomateirals for tumor diagnosis and treatment.

Iron Oxide-Based Magneto-Optical Nanocomposites for In Vivo Biomedical Applications

Iron oxide nanoparticles (IONPs) have played a pivotal role in the development of nanomedicine owing to their versatile functions at the nanoscale, which facilitates targeted delivery, high contrast imaging, and on-demand therapy. Some biomedical inadequacies of IONPs on their own, such as the poor resolution of IONP-based Magnetic Resonance Imaging (MRI), can be overcome by co-incorporating optical probes onto them, which can be either molecule- or nanoparticulate-based. Optical probe incorporated IONPs, together with two prominent non-ionizing radiation sources (i.e., magnetic field and light), enable a myriad of biomedical applications from early detection to targeted treatment of various diseases. In this context, many research articles are in the public domain on magneto-optical nanoparticles; discussed in detail are fabrication strategies for their application in the biomedical field; however, lacking is a comprehensive review on real-life applications in vivo, their toxicity, and the prospect of bench-to-bedside clinical studies. Therefore, in this review, we focused on selecting such important nanocomposites where IONPs become the magnetic component, conjugated with various types of optical probes; we clearly classified them into class 1 to class 6 categories and present only in vivo studies. In addition, we briefly discuss the potential toxicity of such nanocomposites and their respective challenges for clinical translations.

Self-assembly of colloidal inorganic nanocrystals: nanoscale forces, emergent properties and applications

The self-assembly of colloidal nanoparticles has made it possible to bridge the nanoscopic and macroscopic worlds and to make complex nanostructures. The nanoparticle-mediated assembly enables many potential applications, from biodetection and nanomedicine to optoelectronic devices. Properties of assembled materials are determined not only by the nature of nanoparticle building blocks, but also by spatial positions of nanoparticles within the assemblies. A deep understanding of nanoscale interactions between nanoparticles is a prerequisite to controlling nanoparticle arrangement during assembly. In this review, we present an overview of interparticle interactions governing their assembly in a liquid phase. Considerable attention is devoted to examples that illustrate nanoparticle assembly into ordered superstructures using different types of building blocks, including plasmonic nanoparticles, magnetic nanoparticles, lanthanide-doped nanophosphors, and quantum dots. We also cover the physicochemical properties of nanoparticle ensembles, especially those arising from particle coupling effects. We further discuss future research directions and challenges in controlling self-assembly at a level of precision that is most crucial to technology development.

Self-limiting self-assembly of supraparticles for potential biological applications

Nanotechnology has largely spurred the development of biological systems by taking advantage of the unique chemical, physical, optical, magnetic, and electrical properties of nanostructures. Self-limiting self-assembly of supraparticles produce new nanostructures and display great potential to create biomimicking nanostructures with desired functionalities. In this minireview, we summarize the recent developments and outstanding achievements of colloidal supraparticles, such as the driving forces for self-limiting self-assembly of supraparticles and properties of constructed supraparticles. Their application values in biological systems have also been illustrated.

Hybrid magneto-luminescent iron oxide nanocubes functionalized with europium complexes: synthesis, hemolytic properties and protein corona formation

The use of hybrid nanostructures based on magneto-luminescent properties is a promising strategy for nano-bio applications and theranostics platforms. In this work, we carried out the synthesis and functionalization of iron oxide nanocubes (IONCs) to obtain multifunctional hybrid nanostructures towards biomedical applications. The IONCs were functionalized with tetraethylorthosilicate, thenoyltrifluoroacetone-propyl-triethoxysilane and europium(iii)-dibenzoylmethane complexes to obtain the materials termed as IOCNCs@SiO₂, IONCs@SiO₂TTA, IONCs@SiO₂TTA-Eu and IONCs@SiO₂-TTA-Eu-DBM, respectively. Then, the biological interactions of these nanostructures with red blood cells - RBCs (hemolysis) and human blood plasma (protein corona formation) were evaluated. The XPS spectrocopy and EDS chemical mapping analysis showed that each domain is homogeneously occupied in the hybrid material, with the magnetic core at the center and the luminescent domain on the surface of the hybrid nanomaterial with a core@shell like structure. Futhermore, after each functionalization step, the nanomaterial surface charge drastically changed, with critical impact on RBC lysis and corona formation. While IONCs@SiO₂ and IONCs@SiO₂-TTA-Eu-DBM showed hemolytic properties in a dose-dependent manner, the IONCs@SiO₂TTA-Eu did not present any hemolytic effect up to 300 μg mL^-1. Protein corona results showed a pattern of selective adsorption of proteins with each surface of the synthesized hybrid materials. However, as a general result, a suppression of hemolysis after protein corona formation in all tests was verified. Finally, this study provides a solid background for further applications of these hybrid magneto-luminescent materials containing new surface functionalities in the emerging field of medical nanobiotechnology.

From Single-Core Nanoparticles in Ferrofluids to Multi-Core Magnetic Nanocomposites: Assembly Strategies, Structure, and Magnetic Behavior

Iron oxide nanoparticles are the basic components of the most promising magnetoresponsive nanoparticle systems for medical (diagnosis and therapy) and bio-related applications. Multi-core iron oxide nanoparticles with a high magnetic moment and well-defined size, shape, and functional coating are designed to fulfill the specific requirements of various biomedical applications, such as contrast agents, heating mediators, drug targeting, or magnetic bioseparation. This review article summarizes recent results in manufacturing multi-core magnetic nanoparticle (MNP) systems emphasizing the synthesis procedures, starting from ferrofluids (with single-core MNPs) as primary materials in various assembly methods to obtain multi-core magnetic particles. The synthesis and functionalization will be followed by the results of advanced physicochemical, structural, and magnetic characterization of multi-core particles, as well as single- and multi-core particle size distribution, morphology, internal structure, agglomerate formation processes, and constant and variable field magnetic properties. The review provides a comprehensive insight into the controlled synthesis and advanced structural and magnetic characterization of multi-core magnetic composites envisaged for nanomedicine and biotechnology.

Magnetofluorescent Nanoprobe for Multimodal and Multicolor Bioimaging

Although, superparamagnetic iron oxide nanoparticles (SPIONs) have extensively been used as a contrasting agent for magnetic resonance imaging (MRI), the lack of intrinsic fluorescence restricted their application as a multimodal probe, especially in combination with light microscopy. In Addition, the bigger size of the particle renders them incompetent for bioimaging of small organelles. Herein, we report, not only the synthesis of ultrasmall carbon containing magneto-fluorescent SPIONs with size ∼5 nm, but also demonstrate its capability as a multicolor imaging probe. Using MCF-7 and HeLa cell lines, we show that the SPIONs can provide high contrast mulicolor images of the cytoplasm from blue to red region. Further, single particle level photon count data revealed that the SPIONs could efficaciously be utilized in localization based super resolution microscopy in future.

Hollow magnetic-fluorescent nanoparticles for dual-modality virus detection

Combination of magnetic nanomaterials with multifunctionality is an emerging class of materials that exhibit tremendous potential in advanced applications. Synthesizing such novel nanocomposites without compromising magnetic behavior and introducing added functional properties is proven challenging. In this study, an optically active quantum dot (QD) (core) encapsulated inside iron oxide (hollow shell) is prepared as the first electrochemical/fluorescence dual-modality probe. Presence of magnetic layer on the surface enables excellent magnetic property and the encapsulating of QDs on the hollow shell structure maintains the fluorescence with minimal quenching effect, endowing for potential application with fluorescence modality readout. We successfully demonstrate dual-modality sensing utilizing of QD-encapsulated magnetic hollow sphere nanoparticles (QD@MHS NPs) with magnetic separation ability and highly integrated multimodal sensing for the detection of various viruses including hepatitis E virus (HEV), HEV-like particles (HEV-LPs), norovirus-like particles (NoV-LPs), and norovirus (NoV) from clinical specimens. Most importantly, fecal samples of HEV-infected monkey are successfully diagnosed with sensitivity similar to gold standard real-time quantitative reverse transcription-polymerase chain reaction (RT-qPCR). This well-defined QD@MHS NPs-based nanoplatform intelligently integrates dual-modality sensing and magnetic bio-separation, which open a gateway to provide an efficient point-of care testing for virus diagnostics.

Binary Nanoparticle Superlattices for Plasmonically Modulating Upconversion Luminescence

Engineering a facile and controllable approach to modulate the spectral properties of lanthanide-doped upconversion nanoparticles (UCNPs) is always an ongoing challenge. Herein, long-range ordered, distinct two-dimensional (2D) binary nanoparticle superlattices (BNSLs) composed of NaREF₄ :Yb/Er (RE = Y and Gd) UCNPs and plasmonic metallic nanoparticles (Au NPs), including AB, AB₃ , and AB₁₃ lattices, are fabricated via a slow evaporation-driven self-assembly to achieve plasmonic modulation of upconversion luminescence (UCL). Optical measurements reveal that typical red-green UCL from UCNPs can be effectively modulated into reddish output in BNSLs, with a drastically shortened lifetime. Notably, for AB₃ - and AB₁₃ -type BNSLs with more proximal Au NPs around each UCNP, modified UCL with fine-structured spectral lineshape is observed. These differences could be interpreted by the interplay of collective plasmon resonance introduced by 2D periodic Au arrays and spectrally selective energy transfer between UCNPs and Au. Thus, fabricating UCNP-Au BNSLs with desired lattice parameters and NP configurations could be a promising way to tailor the UCL through controlled plasmonic modulation.

A novel magneto-gold nanohybrid-enhanced lateral flow immunoassay for ultrasensitive and rapid detection of ochratoxin A in grape juice

Conventional gold nanoparticle-based lateral flow immunoassay (LFIA) usually suffers a huge challenge in measuring target concentration in food matrices with dark color because of its poor resistance to the background matrix and color interference. To address this issue, we first report a novel bifunctional magneto-gold nanohybrid (MGNH) for the simultaneous magnetic separation and colorimetric target sensing by integrating MGNHs into LFIA. Under optimum conditions, an ultrasensitive detection of ochratoxin A (OTA) in grape juice was achieved with a limit of detection at 0.094 ng mL^-1. The average recoveries of this MGNH-LFIA ranged from 92.31% to 108.97% with a coefficient of variation of below 12%. The excellent selectivity of our MGNH-LFIA against OTA was demonstrated. Besides, our MGNH-LFIA is comparable to liquid chromatography coupled with mass spectrometry in terms of accuracy, reproducibility, and practicability. The designed MGNH-LFIA platform is readily extended for improving other small molecule detection in food samples.

Fully Self-Assembled Silica Nanoparticle-Semiconductor Quantum Dot Supra-Nanoparticles and Immunoconjugates for Enhanced Cellular Imaging by Microscopy and Smartphone Camera

There is a growing need for brighter luminescent materials to improve the detection and imaging of biomarkers. Relevant contexts include low-abundance biomarkers and technology-limited applications, where an example of the latter is the emerging use of smartphones and other nonoptimal but low-cost and portable devices for point-of-care diagnostics. One approach to achieving brighter luminescent materials is incorporating multiple copies of a luminescent material into a larger supra-nanoparticle (supra-NP) assembly. Here, we present a facile method for the preparation and immunoconjugation of supra-NP assemblies (SiO₂@QDs) that comprised many quantum dots (QDs) around a central silica nanoparticle (SiO₂ NP). The assembly was entirely driven by spontaneous affinity interactions between the constituent materials, which included imidazoline-functionalized silica nanoparticles, ligand-coated QDs, imidazole-functionalized dextran, and tetrameric antibody complexes (TACs). The physical and optical properties of the SiO₂@QDs were characterized at both the ensemble and single-particle levels. Notably, the optical properties of the QDs were preserved upon assembly into supra-NPs, and single SiO₂@QDs were approximately an order of magnitude brighter than single QDs and nonblinking. In proof-of-concept applications, including selective immunolabeling of breast cancer cells, the SiO₂@QDs provided higher sensitivity and superior signal-to-background ratios whether using research-grade fluorescence microscopy or smartphone-based imaging. Overall, the SiO₂@QDs are promising materials for enhanced bioanalysis and imaging.

Cyclodextrin-based superparamagnetic host vesicles as ultrasensitive nanobiocarriers for electrosensing

A carbohydrate-based nanohybrid of superparamagnetic nanoparticles embedded in unilamellar bilayer vesicles of amphiphilic β-cyclodextrins (magnetic cyclodextrin vesicles, mCDVs) has been engineered as a novel magnetic biorecognition probe for electrosensing. As a proof-of-concept, the synergistic properties of these mCDVs on a magneto nanocomposite carbon-paste electrode (mNC-CPE) have been used for the picomolar determination of thyroxine (T4) as a model analyte (taking advantage of the host-guest chemistry of β-cyclodextrin and T4), resulting in the most sensitive electrochemical T4 system reported in the literature. Accordingly, a first demonstration of mCDVs as alternative water-soluble magnetic nanobiocarriers has been devised foreseeing their successful use as alternative electrochemical biosensing platforms for the supramolecular trace determination of alternative targets.