Electrodeposition of hierarchically structured three-dimensional nickel-iron electrodes for efficient oxygen evolution at high current densities

Laser-Induced Controllable Porosity in Additive Manufacturing Boosts Efficiency of Electrocatalytic Water Splitting

In laser-based additive manufacturing (AM), porosity and unmelted metal powder are typically considered undesirable and harmful. Nevertheless in this work, precisely controlling laser parameters during printing can intentionally introduce controllable porosity, yielding a porous electrode with enhanced catalytic activity for the oxygen evolution reaction (OER). This study demonstrates that deliberate introduction of porosity, typically considered a defect, leads to improved gas molecule desorption, enhanced mass transfer, and increased catalytically active sites. The optimized P-93% electrode displays superior OER performance with an overpotential of 270 mV at 20 mA cm-2. Furthermore, it exhibits remarkable long-term stability, operating continuously for over 1000 h at 10 mA cm-2 and more than 500 h at 500 mA cm-2. This study not only provides a straightforward and mass-producible method for efficient, binder-free OER catalysts but also, if optimized, underscores the potential of laser-based AM driven defect engineering as a promising strategy for industrial water splitting.

Cu Based Dilute Alloys for Tuning the C2+ Selectivity of Electrochemical CO2 Reduction

Electrochemical CO2 reduction is a promising technology for replacing fossil fuel feedstocks in the chemical industry but further improvements in catalyst selectivity need to be made. So far, only copper-based catalysts have shown efficient conversion of CO2 into the desired multi-carbon (C2+) products. This work explores Cu-based dilute alloys to systematically tune the energy landscape of CO2 electrolysis toward C2+ products. Selection of the dilute alloy components is guided by grand canonical density functional theory simulations using the calculated binding energies of the reaction intermediates CO*, CHO*, and OCCO* dimer as descriptors for the selectivity toward C2+ products. A physical vapor deposition catalyst testing platform is employed to isolate the effect of alloy composition on the C2+/C1 product branching ratio without interference from catalyst morphology or catalyst integration. Six dilute alloy catalysts are prepared and tested with respect to their C2+/C1 product ratio using different electrolyzer environments including selected tests in a 100-cm2 electrolyzer. Consistent with theory, CuAl, CuB, CuGa and especially CuSc show increased selectivity toward C2+ products by making CO dimerization energetically more favorable on the dominant Cu facets, demonstrating the power of using the dilute alloy approach to tune the selectivity of CO2 electrolysis.

Unraveling the Electrocatalytic Activity in HMF Oxidation to FDCA by Fine-Tuning the Degree of NiOOH Phase Over Ni Nanoparticles Supported on Graphene Oxide

The development of an efficient electrocatalyst for HMF oxidation to FDCA has been in the early stages. Herein, the NiNPs/GO-Ni-foam is fabricated as an electrocatalyst for FDCA production. However, the electrocatalytic performance of the untreated NiNPs/GO-Ni-foam is observed with moderate Faradaic efficiency (FE) (73.0%) and FDCA yield (80.2%). By electrochemically treating the NiNPs/GO-Ni-foam in an alkaline solution with positive potential at different treatment durations, the degree of NiOOH on metal surfaces is changed. The distinctive electrocatalytic activity obtained when using the different NiOOH degrees allows to understand the crucial impact of NiOOH species in HMF electrooxidation. Enhancing the portion of the NiOOH phase on the electrocatalyst surface improves electrocatalytic activity in terms of FE and FDCA yield up to 94.8±4.8% and 86.9±4.1%, respectively. Interestingly, as long as the NiOOH portion on the electrocatalyst surface is preserved or regenerated, the electrocatalyst performance can be intact even after several catalytic cycles. The theoretical study via density functional theory (DFT) also agrees with the experimental observations and confirms that the NiOOH phase facilitates the electrochemical transformation of HMF to FDCA through the HMFCA pathway, and the potential limiting step of the overall reaction is the oxidation of FFCA to FDCA.

Sonication-Induced Boladipeptide-Based Metallogel as an Efficient Electrocatalyst for the Oxygen Evolution Reaction

Bioinspired, self-assembled hybrid materials show great potential in the field of energy conversion. Here, we have prepared a sonication-induced boladipeptide (HO-YF-AA-FY-OH (PBFY); AA = Adipic acid, F = l-phenylalanine, and Y = l-tyrosine) and an anchored, self-assembled nickel-based coordinated polymeric nanohybrid hydrogel (Ni-PBFY). The morphological studies of hydrogels PBFY and Ni-PBFY exhibit nanofibrillar network structures. XPS analysis has been used to study the self-assembled coordinated polymeric hydrogel Ni-PBFY-3, with the aim of identifying its chemical makeup and electronic state. XANES and EXAFS analyses have been used to examine the local electronic structure and coordination environment of Ni-PBFY-3. The xerogel of Ni-PBFY was used to fabricate the electrodes and is utilized in the OER (oxygen evolution reaction). The native hydrogel (PBFY) contains a gelator boladipeptide of 15.33 mg (20 mmol L-1) in a final volume of 1 mL. The metallo-hydrogel (Ni-PBFY-3) is prepared by combining 15.33 mg (20 mmol L-1) of boladipeptide (PBFY) with 3 mg (13 mmol L-1) of NiCl2·6H2O metal in a final volume of 1 mL. It displays an ultralow Tafel slope of 74 mV dec-1 and a lower overpotential of 164 mV at a 10 mA cm-2 current density in a 1 M KOH electrolyte, compared to other electrocatalysts under the same experimental conditions. Furthermore, the Ni-PBFY-3 electrocatalyst has been witnessed to be highly stable during 100 h of chronopotentiometry performance. To explore the OER mechanism in an alkaline medium, a theoretical calculation was carried out by employing the first-principles-based density functional theory (DFT) method. The computed results obtained by the DFT method further confirm that the Ni-PBFY-3 electrocatalyst has a high intrinsic activity toward the OER, and the value of overpotential obtained from the present experiment agrees well with the computed value of the overpotential. The biomolecule-assisted electrocatalytic results provide a new approach for designing efficient electrocatalysts, which could have significant implications in the field of green energy conversion.

Accurately Modulating Binuclear Metal Nodes of Metal-Organic Frameworks for Oxygen Evolution

The accurate manipulation of the species and locations of catalytic centers is crucial for regulating the catalytic activity of catalysts, which is essential for their efficient design and development. Metal-organic frameworks (MOFs) with coordinated metal sites are ideal materials for investigating the origin of catalytic activity. In this study, we present a Ni2-MOF featuring novel Ni-based binuclear nodes with open metal sites (OMSs) and saturated metal sites (SMSs). The nickel was replaced by iron to obtain Ni1Fe1-MOF. In the electrocatalytic oxygen evolution reaction, Ni1Fe1-MOF exhibited an overpotential and Tafel slope of 370 mV@10 mA cm-2 and 87.06 mV dec-1, respectively, which were higher than those of Ni2-MOF (283 mV@10 mA cm-2 and 39.59 mV dec-1, respectively), demonstrating the superior performance of Ni1Fe1-MOF. Furthermore, theoretical calculations revealed that iron as an SMS may effectively regulate the electronic structure of the nickel catalytic center to reduce the free energy barrier ΔG*OH of the rate-determining step.

Dipole-Dipole Tuned Electronic Reconfiguration of Defective Carbon Sites for Efficient Oxygen Reduction into H2O2

Metal-free carbon-based materials are one of the most promising electrocatalysts toward 2-electron oxygen reduction reaction (2e-ORR) for on-site production of hydrogen peroxide (H2O2), which however suffer from uncontrollable carbonizations and inferior 2e-ORR selectivity. To this end, a polydopamine (PDA)-modified carbon catalyst with a dipole-dipole enhancement is developed via a calcination-free method. The H2O2 yield rate outstandingly reaches 1.8 mol gcat -1 h-1 with high faradaic efficiency of above 95% under a wide potential range of 0.4-0.7 VRHE, overwhelming most of carbon electrocatalysts. Meanwhile, within a lab-made flow cell, the synthesized ORR electrode features an exceptional stability for over 250 h, achieved a pure H2O2 production efficacy of 306 g kWh-1. By virtue of its industrial-level capabilities, the established flow cell manages to perform a rapid pulp bleaching within 30 min. The superior performance and enhanced selectivity of 2e-ORR is experimentally revealed and attributed to the electronic reconfiguration on defective carbon sites induced by non-covalent dipole-dipole influence between PDA and carbon, thereby prohibiting the cleavage of O-O in OOH intermediates. This proposed strategy of dipole-dipole effects is universally applicable over 1D carbon nanotubes and 2D graphene, providing a practical route to design 2e-ORR catalysts.

Spontaneous-Spin-Polarized 2D π-d Conjugated Frameworks Towards Enhanced Oxygen Evolution Kinetics

Alternative strategies to design sustainable-element-based electrocatalysts enhancing oxygen evolution reaction (OER) kinetics are demanded to develop affordable yet high-performance water-electrolyzers for green hydrogen production. Here, it is demonstrated that the spontaneous-spin-polarized 2D π-d conjugated framework comprising abundant elements of nickel and iron with a ratio of Ni:Fe = 1:4 with benzenehexathiol linker (BHT) can improve OER kinetics by its unique electronic property. Among the bimetallic NiFex:y-BHTs with various ratios with Ni:Fe = x:y, the NiFe1:4-BHT exhibits the highest OER activity. The NiFe1:4-BHT shows a specific current density of 140 A g-1 at the overpotential of 350 mV. This performance is one of the best activities among state-of-the-art non-precious OER electrocatalysts and even comparable to that of the platinum-group-metals of RuO2 and IrO2. The density functional theory calculations uncover that introducing Ni into the homometallic Fe-BHT (e.g., Ni:Fe = 0:1) can emerge a spontaneous-spin-polarized state. Thus, this material can achieve improved OER kinetics with spin-polarization which previously required external magnetic fields. This work shows that a rational design of 2D π-d conjugated frameworks can be a powerful strategy to synthesize promising electrocatalysts with abundant elements for a wide spectrum of next-generation energy devices.

Elevated Water Oxidation by Cation Leaching Enabled Tunable Surface Reconstruction

Water electrolysis is one promising and eco-friendly technique for energy storage, yet its overall efficiency is hindered by the sluggish kinetics of oxygen evolution reaction (OER). Therefore, developing strategies to boost OER catalyst performance is crucial. With the advances in characterization techniques, an extensive phenomenon of surface structure evolution into an active amorphous layer was uncovered. Surface reconstruction in a controlled fashion was then proposed as an emerging strategy to elevate water oxidation efficiency. In this work, Cr substitution induces the reconstruction of NiFexCr2-xO4 during cyclic voltammetry (CV) conditioning by Cr leaching, which leads to a superior OER performance. The best-performed NiFe0.25Cr1.75O4 shows a ~1500 % current density promotion at overpotential η=300 mV, which outperforms many advanced NiFe-based OER catalysts. It is also found that their OER activities are mainly determined by Ni : Fe ratio rather than considering the contribution of Cr. Meanwhile, the turnover frequency (TOF) values based on redox peak and total mass were obtained and analysed, and their possible limitations in the case of NiFexCr2-xO4 are discussed. Additionally, the high activity and durability were further verified in a membrane electrode assembly (MEA) cell, highlighting its potential for practical large-scale and sustainable hydrogen gas generation.

Graphene and MOF Assembly: Enhanced Fabrication and Functional Derivative via MOF Amorphization

The integration of graphene and metal-organic frameworks (MOFs) has numerous implications across various domains, but fabricating such assemblies is often complicated and time-consuming. Herein, a one-step preparation of graphene-MOF assembly is presented by directly impregnating vertical graphene (VG) arrays into the zeolitic imidazolate framework (ZIF) precursors under ambient conditions. This approach can effectively assemble multiple ZIFs, including ZIF-7, ZIF-8, and ZIF-67, resulting in their uniform dispersion on the VG with adjustable sizes and shapes. Hydrogen defects on the VG surface are critical in inducing such high-efficiency ZIF assembly, acting as the reactive sites to interact with the ZIF precursors and facilitate their crystallisation. The versatility of VG-ZIF-67 assembly is further demonstrated by exploring the process of MOF amorphization. Surprisingly, this process leads to an amorphous thin-film coating formed on VG (named VG-IL-amZIF-67), which preserves the short-range molecular bonds of crystalline ZIF-67 while sacrificing the long-range order. Such a unique film-on-graphene architecture maintains the essential characteristics and functionalities of ZIF-67 within a disordered arrangement, making it well-suited for electrocatalysis. In electrochemical oxygen reduction, VG-IL-amZIF-67 exhibits exceptional activity, selectivity, and stability to produce H2O2 in acid media.

Electronic Structure Modulation Via Iron-Incorporated NiO to Boost Urea Oxidation/Oxygen Evolution Reaction

The urea-assisted water splitting not only enables a reduction in energy consumption during hydrogen production but also addresses the issue of environmental pollution caused by urea. Doping heterogeneous atoms in Ni-based electrocatalysts is considered an efficient means for regulating the electronic structure of Ni sites in catalytic processes. However, the current methodologies for synthesizing heteroatom-doped Ni-based electrocatalysts exhibit certain limitations, including intricate experimental procedures, prolonged reaction durations, and low product yield. Herein, Fe-doped NiO electrocatalysts were successfully synthesized using a rapid and facile solution combustion method, enabling the synthesis of 1.1107 g within a mere 5 min. The incorporation of iron atoms facilitates the modulation of the electronic environment around Ni atoms, generating a substantial decrease in the Gibbs free energy of intermediate species for the Fe-NiO catalyst. This modification promotes efficient cleavage of C-N bonds and consequently enhances the catalytic performance of UOR. Benefiting from the tunability of the electronic environment around the active sites and its efficient electron transfer, Fe-NiO electrocatalysts only needs 1.334 V to achieve 50 mA cm-2 during UOR. Moreover, Fe-NiO catalysts were integrated into a dual electrode urea electrolytic system, requiring only 1.43 V of cell voltage at 10 mA cm-2.

Crystalline/Amorphous Mo-Ni(OH)2/FexNiy(OH)3x+2y hierarchical nanotubes as efficient electrocatalyst for overall water splitting

The development of efficient bifunctional catalysts for overall water splitting is highly desirable and essential for the advancement of hydrogen technology. In this work, Mo-Ni(OH)2/FexNiy(OH)3x+2y with hierarchical nanotube structure is constructed on flexible carbon cloth (CC) through simple electrochemical deposition and hydrothermal method. The hollow tube-structure is in favor of both exposing active sites and enhancing mass transfer capability. Moreover, the doping of Mo can enhance the electronic conductivity of heterostructures. The interfacial interaction between amorphous and crystal can enhance effectively the charge transfer kinetics across the interface. Therefore, Mo-Ni(OH)2/FexNiy(OH)3x+2y can achieve a low overpotential of 57 mV for hydrogen evolution reaction (HER) and 229 mV for oxygen evolution reaction (OER) at 10 mA·cm-2. In addition, Mo-Ni(OH)2/FexNiy(OH)3x+2y needs a potential of only 1.54 V at 10 mA·cm-2 for overall water splitting, and retains for a long period of time (60 h) reliable. The work will provide a valuable approach to the construction of highly efficient electrocatalysts for overall water splitting.

Rational Manipulation of Active CNT Encapsulated Fe Doped NiCoP Nanoparticles In Situ Grown in Hierarchically Carbonized Wood for High-Current-Density Water Splitting

Precise morphology design and electronic structure regulation are critically significant to promote catalytic activity and stability for electrochemical hydrogen production at high current density. Herein, the carbon nanotube (CNT) encapsulated Fe-doped NiCoP nanoparticles is in-situ grown in hierarchical carbonized wood (NCF0.5 P@CNT/CW) for water splitting. Coupling merits of porous carbonized wood (CW) substrate, CNT encapsulating and Fe doping, the NCF0.5 P@CNT/CW features remarkable and durable electrocatalytic activity. The overpotentials of NCF0.5 P@CNT/CW at 50 mA cm-2 mV and 205 mV for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) and features high current density of 800 mA cm-2 within 300 mV for both OER and HER. Moreover, NCF0.5 P@CNT/CW displays outstanding overall water splitting performance (η50 = 1.62 V and η100 = 1.67 V), outperforming Pt/C║RuO2 (η50 = 1.74 V), and can achieve the current density of 700 mA cm-2 at a lower cell voltage of 1.78 V. Overpotential is only 4.0 % decay after 120 h measurement at 50 mA cm-2 . Density functional theory (DFT) calculations reveals Fe doping optimizes the binding energy and Gibbs free energy of intermediates, and regulates d-band center of NCF0.5 P@CNT/CW. Such synergistic strategy of morphology manipulation and electronic structure optimization provides a spark for developing effective and robust bifunctional catalysts.

Mesoporous hydrogel electrodes with flexible frameworks exhibiting enhanced mass transport for the oxygen evolution reaction

Mesoporous hydrogel electrodes with unique flexible mesopores surrounded by CoOOH nanosheets were prepared via the electrochemical deposition of hybrid cobalt hydroxide nanosheets, exhibiting high oxygen evolution reaction activity at a high current density owing to the enhanced mass transport of oxygen molecules.

Zeolitic Imidazolate Framework-Derived Co3S4@NiFe-LDH Core-Shell Heterostructure as Efficient Bifunctional Electrocatalyst for Water Splitting

The development of stable and efficient bifunctional electrocatalysts is of utmost importance for overall water splitting. This study introduces Co3S4@NiFe-LDH core-shell heterostructure prepared via an electrodeposition of ultrathin NiFe-LDH nanosheet on zeolitic imidazolium framework-derived Co3S4 nanosheet arrays. The bifunctional Co3S4@NiFe-LDH/NF exhibits impressive catalytic performance and long-term stability for both the OER and HER with low overpotentials of 100 mA cm-2 at 235 mV and 10 mA cm-2 at 95 mV in 1 M KOH, respectively. The assembled cell with Co3S4@NiFe-LDH/NF as both cathode and anode shows voltages of 1.595 and 1.666 V at current densities of 10 and 20 mA cm-2, respectively, as well as ultralong stability over 500 h. DFT calculations expose a robust electron interaction at the heterogeneous interface of the Co3S4@NiFe-LDH/NF core-shell structure. This interaction promotes electron transfer from NiFe-LDH to Co3S4 and reduces the energy barriers for OER intermediates, thereby enhancing electrocatalytic activity. This research contributes novel insights toward the promising materials for electrochemical water splitting through the construction of heterojunction interfaces.

In situ assembly of Ni3S2 nanosheets encapsulated with NiFe(oxy)hydroxides for efficient water oxidation

Morphology control plays a pivotal role in achieving an exceptionally efficient electrocatalyst with abundant active sites and outstanding electrical conductivity. In this study, we employed a sophisticated chemical nanoengineering technique to fabricate an exquisitely thin NiFe(OH)x electrocatalyst on Ni3S2 nanosheets. Firstly, the Ni3S2 nanosheets were synthesized through an innovative in situ one-step sulfurization reaction of the Ni(OH)2 nanosheets grown on Ni foam. Subsequently, a remarkable ultrathin layer of NiFe(OH)x was precisely deposited onto the surface of the Ni3S2 to form a captivating core-shell structure using a chemical dipping method. The resulting electrode, denoted as NiFe(OH)x/Ni3S2/NF, exhibited exceptional electrocatalytic activity and durability towards the oxygen evolution reaction (OER), owing to its expansive specific surface area, rapid electron transport, and robust interlayer bonding. Notably, this electrode achieved an impressive current density of 100 mA cm-2 at an astonishingly low overpotential of 218 mV while maintaining a low Tafel slope of 37.9 mV dec-1 and remarkable stability for up to 12 days in 1 M KOH aqueous solution. This work presents an alluring novel approach for constructing highly efficient ultrathin catalysts for water splitting.

Superaerophilic/Superaerophobic NiFe-LDHs Electrode for Enhancing Overall Water Splitting in Alkaline Media

Overall water splitting, as a critical approach to producing green hydrogen, is greatly impeded by the mass transfer of gaseous bubbles and dissolved gas molecules. Herein, a bifunctional superaerophilic/superaerophobic (SAL/SAB) NiFe layered-double-hydroxides (LDHs) electrode has been developed, which can drive H2 and O2 bubbles out of the reaction system by asymmetric Laplace pressure and accelerate dissolved gases diffusion through reducing their diffusion distance. Consequently, the SAL/SAB NiFe-LDHs electrode exhibits excellent HER activity with an overpotential of -76 mV at -10 mA cm-2 and outstanding oxygen evolution reaction activity with an overpotential of 253 mV at 100 mA cm-2. The bifunctional SAL/SAB NiFe-LDHs electrode is further utilized in overall water splitting, which can achieve 10 mA cm-2 with a cell voltage of 1.54 V. This work provides an efficient strategy to improve the efficiency of overall water splitting and can stimulate new electrode design in various gas-involved processes.

Correlating Structural Disorder in Metal (Oxy)hydroxides and Catalytic Activity in Electrocatalytic Oxygen Evolution

Understanding the correlation between the structural evolution of electrocatalysts and their catalytic activity is both essential and challenging. In this study, we investigate this correlation in the context of the oxygen evolution reaction (OER) by examining the influence of structural disorder during and after dynamic structural evolution on the OER activity of Fe-Ni (oxy)hydroxide catalysts using operando X-ray absorption spectroscopy, alongside other experiments and theoretical calculations. The Debye-Waller factors obtained from extended X-ray absorption fine structure analyses reflect the degree of structural disorder and exhibit a robust correlation with the intrinsic OER activities of the electrocatalysts. The enhanced OER activity of in situ-generated metal (oxy)hydroxides derived from different pre-catalysts is linked to increased structural disorder, offering a promising approach for designing efficient OER electrocatalysts. This strategy may inspire similar investigations in related electrocatalytic energy-conversion systems.

Influence of conductive carbon and MnCo2O4 on morphological and electrical properties of hydrogels for electrochemical energy conversion

In this work, a strategy for one-stage synthesis of polymer composites based on PNIPAAm hydrogel was presented. Both conductive particles in the form of conductive carbon black (cCB) and MnCo2O4 (MCO) spinel particles were suspended in the three-dimensional structure of the hydrogel. The MCO particles in the resulting hydrogel composite acted as an electrocatalyst in the oxygen evolution reaction. Morphological studies confirmed that the added particles were incorporated and, in the case of a higher concentration of cCB particles, also bound to the surface of the structure of the hydrogel matrix. The produced composite materials were tested in terms of their electrical properties, showing that an increase in the concentration of conductive particles in the hydrogel structure translates into a lowering of the impedance modulus and an increase in the double-layer capacitance of the electrode. This, in turn, resulted in a higher catalytic activity of the electrode in the oxygen evolution reaction. The use of a hydrogel as a matrix to suspend the catalyst particles, and thus increase their availability through the electrolyte, seems to be an interesting and promising application approach.

Bubbles in Porous Electrodes for Alkaline Water Electrolysis

Porous electrodes with high specific surface areas have been commonly employed for alkaline water electrolysis. The gas bubbles generated in electrodes due to water electrolysis, however, can screen the reaction sites and hinder reactant transport, thereby deteriorating the performance of electrodes. Hence, an in-depth understanding of the behavior of bubbles in porous electrodes is of great importance. Nevertheless, since porous electrodes are opaque, direct observation of bubbles therein is still a challenge. In this work, we have successfully captured the behavior of bubbles in the pores at the side surfaces of nickel-based porous electrodes. Two types of porous electrodes are employed: the ones with straight pores along the gravitational direction and the ones with tortuous pores. In the porous electrodes with tortuous pores, the moving bubbles are prone to collide with the solid matrix, thereby leading to the accumulation of bubbles in the pores and hence bubble trapping. By contrast, in the porous electrodes with straight pores, bubbles are seldom trapped; and when two bubbles near the wall surfaces coalesce, the merged bubble can jump away from the wall surfaces, releasing more active surfaces for reaction. As a result, the porous electrodes with straight pores, although with lower specific surface areas, are superior to those with tortuous pores. The relationship among the pore structures of porous electrodes, bubble behavior, and electrode performance disclosed in this work provides deep insights into the design of porous electrodes.

Metal nitrides for seawater electrolysis

Electrocatalytic high-throughput seawater electrolysis for hydrogen production is a promising green energy technology that offers possibilities for environmental and energy sustainability. However, large-scale application is limited by the complex composition of seawater, high concentration of Cl- leading to competing reaction, and severe corrosion of electrode materials. In recent years, extensive research has been conducted to address these challenges. Metal nitrides (MNs) with excellent chemical stability and catalytic properties have emerged as ideal electrocatalyst candidates. This review presents the electrode reactions and basic parameters of the seawater splitting process, and summarizes the types and selection principles of conductive substrates with critical analysis of the design principles for seawater electrocatalysts. The focus is on discussing the properties, synthesis, and design strategies of MN-based electrocatalysts. Finally, we provide an outlook for the future development of MNs in the high-throughput seawater electrolysis field and highlight key issues that require further research and optimization.

Amorphization-induced abundant coordinatively unsaturated Ni active sites in NiCo(OH)2 for boosting catalytic OER and HER activities at high current densities for water-electrolysis

The large overpotential required for oxygen evolution reaction (OER) is one of the major factors limiting the efficiency of electrochemical water-electrolysis for hydrogen production. In this work, to decrease OER energy barrier and obtain low overpotential, amorphous-crystalline NiCo(OH)2 nanoplates are in-situ grown on nickel foam surface to form a catalyst-based electrode (ac-NiCo(OH)2/NF) for water-electrolysis application. As the inner amorphization of NiCo(OH)2 results in increased electron density of the metal sites, leading to the formation of tensile Ni-O bond, the coordinatively unsaturated Ni sites in the down-shift d-band centers toward Fermi level can lower the antibonding states. This can lead to optimized adsorption and desorption energies for oxygen-containing intermediates for OER. As expected, the prepared ac-NiCo(OH)2/NF electrode presents a low overpotential of 364 mV to deliver 1000 mA cm-2 toward OER with impressively high robust stability. When this electrocatalyst electrode serves as both the anode and cathode, the assembled anion exchange membrane (AEM) electrolyser only needs a cell voltage of 1.68 V to drive the overall water-electrolysis process at a current density of 10 mA cm-2.

Interfacial engineering of CoP/CoS2 heterostructure for efficiently electrocatalytic pH-universal hydrogen production

The design and development of high-performance, low-cost catalysts with long-term durability are crucial for hydrogen generation from water electrolysis. Interfacial engineering is an appealing strategy to boost the catalytic performance of electrode materials toward hydrogen evolution reaction (HER). Herein, we report a simple phosphidation followed by sulfidation treatment to construct heterogeneous cobalt phosphide-cobalt sulfide nanowire arrays on carbon cloth (CoP/CoS2/CC). When evaluated as catalysts toward the HER, the resultant CoP/CoS2/CC exhibits efficient pH-universal hydrogen production due to the heterostructure, synergistic contribution of CoP and CoS2, and conductive substrate. To attain a current density of 10 mA cm-2, overpotentials of only 111.2, 58.1, and 182.9 mV for CoP/CoS2/CC are required under alkaline, acidic, and neutral conditions, respectively. In particular, the as-prepared CoP/CoS2/CC shows markedly improved HER electroactivity in 1.0 M KOH, even outperforming commercial Pt-C/CC at a current density of >50 mA cm-2. In addition, the self-assembled CoP/CoS2||NiFe layered double hydroxide electrolyzer demonstrates efficient catalytic performance and long-time stability, excelling the benchmark Pt-C||IrO2. These findings indicate an effective pathway for the fabrication of high-performance heterogeneous electrocatalysts for hydrogen production in the future.

Proactive Effect of Algae-Based Graphene Support on the Oxygen Evolution Reaction Electrocatalytic Activity of NiFe

The preparation of graphene materials from biomass resources is still a challenge, even more so if they are going to be employed as supports for electrocatalysts for water splitting. Herein, we describe the preparation and characterization of graphene oxides (GOs) from solid macroalgae waste obtained after processing an agar-agar residue. The structural and morphological characterization of the obtained GO confirm the presence of a lamellar material that is composed of few layers with an increased number of heteroatoms (including nitrogen) if compared with those observed in a GO obtained from graphite (reference). Three-dimensional electrodes were prepared from these GOs by depositing them onto a fibrous carbon paper, followed by electrodeposition of the catalyst, NiFe. The electrocatalytic performance of these hybrid systems for the oxygen evolution reaction (OER) showed a proactive effect of both graphene materials toward catalysis. Moreover, the electrode prepared from the algae-based graphene showed the highest electrocatalytic activity. This fact could be explained by the different structure of the algae-based graphene which, due to differences in the nucleation growth patterns and electroactive sites developed during the electrodeposition process, produced more reactive NiFe species (higher oxidation state).

Improving the Efficiencies of Water Splitting and CO2 Electrolysis by Anodic O2 Bubble Management

This study systematically explores the impact of the anodic flow field design on the transport of O2 bubble and subsequent energy efficiency in electrolysis devices. Two distinct configurations, namely a conventional serpentine flow panel and an interdigitated flow panel, are integrated at the anode side of the electrolyzer. The interdigitated flow field exhibits superior performance in both alkaline water splitting and CO2 reduction despite the experience of an increased pressure drop. Numerical simulations reveal that the enhanced convective flow of the O2 bubbles induced by a forced anolyte flow through the porous electrode within the interdigitated panel design resulted in a 3 orders of magnitude increase in the level of the O2 bubble transport compared to the serpentine configuration. These findings not only underscore the significance of flow field design on bubble management but also provide a basis for advancing the electrolysis efficiency at industrial-level current densities.

Activating Commercial Nickel Foam to a Highly Efficient Electrocatalyst for Oxygen Evolution Reaction through a Three-Step Surface Reconstruction

It is highly desired to directly use commercial nickel foam (CNF) as an electrocatalyst for the oxygen evolution reaction (OER) via simple surface reconstruction. In our research, a simple three-step preactivation process was proposed to reconstruct CNF as an efficient OER catalyst, including calcination, high-voltage treatment, and immersing in electrolyte. The optimal CNF after three-step activation reaches an excellent OER performance of 228 and 267 mV at η10 and η100 in alkaline media and can tolerate long-term tests under a large current density of 500 mA·cm-2. The promotion of each step was explored. The calcination step leads to a reconstructive surficial morphology with an enlarged active surface, providing a prerequisite for the following construction steps. The high-voltage treatment changes the valence of surface Ni species, generating phases with higher catalytic activity, and the immersing process introduces Fe heteroatoms into the surface of CNF, boosting the catalytic performance of CNF through Ni-Fe interactions. This research provides a simple method of making high-performance catalysts with accessible nickel foam, a potential for large-scale application in practical industry, and new thinking for the manipulation of Ni-based catalysts.

Boosting oxygen evolution reaction activity with Mo incorporated NiFe-LDH electrocatalyst for efficient water electrolysis

This work demonstrates a simple and scalable methodology for the binder-free direct growth of Mo-doped NiFe-layered double hydroxides on a nickel substrate via an electrodeposition route at room temperature. A three-dimensional (3D) nanosheet array morphology of the electrocatalyst provides immense electrochemical surface area as well as abundant catalytically active sites. Mo incorporation in the NiFe-LDH plays a crucial role in regulating the catalytic activity of oxygen evolution reaction (OER). The prepared electrocatalyst exhibited low overpotential (i.e., 230 mV) at 30 mA cm-2 for OER in an alkaline electrolyte (i.e., 1 M KOH). Furthermore, the optimized Mo-doped NiFe-LDH electrode was used as an anode in a laboratory-scale in situ single cell test system for alkaline water electrolysis at 80 °C with a continuous flow of 30 wt% KOH, and it shows the efficient electrochemical performance with a lower cell voltage of 1.80 V at a current density of 400 mA cm-2. In addition, an admirable long-term cell durability is also demonstrated by the cell for 24 h. This work encourages new designs and further development of electrode material for alkaline water electrolysis on a commercial scale.

Rapid Formation of Epitaxial Oxygen Evolution Reaction Catalysts on Dendrites with High Catalytic Activity and Stability

Oxygen evolution reaction is an essential but kinetically sluggish step in many energy storage and conversion processes and therefore is in pursuit of highly efficient and stable catalysts. Although nanosized transition-metal-based oxides/hydroxides exhibit high catalytic activity toward the oxygen evolution reaction (OER), many of them suffer from low stability at an anode current density in industrial scale. Herein, by combining a rapid epitaxial formation method with dynamic bubble-templated electrodeposition, we successfully developed single crystalline NiFeCu oxide catalysts with a hierarchical porous structure. It was found that the structure can facilitate fast electron transportation for the catalysts and retard the diffusion of the O atoms to the inner metallic current collector. The hierarchical pores inherited from the hydrogen bubble templates built ideal channels for the massive and rapid release of oxygen bubbles. As a consequence, the NiFeCu oxides catalyzed the OER more efficiently and steadily than the commercial RuO2 catalyst at an anode current density in industrial scale (300 mA/cm2). This work, by resolving the durability concerns for nanosized oxides, offers a series of highly efficient and stable catalysts for OER and a structure building strategy to boost the catalytic activity and stability for nonconductive catalysts.

Parallel Nanosheet Arrays for Industrial Oxygen Production

According to the traditional nucleation theory, crystals in solution nucleate under thermal fluctuations with random crystal orientation. Thus, nanosheet arrays grown on a substrate always exhibit disordered arrangements, which impede mass transfer during catalysis. To overcome this limitation, here, we demonstrate stress-induced, oriented nucleation and growth of nanosheet arrays. A regularly self-growing parallel nanosheet array is realized on a curved growth substrate. During electrochemical oxygen production, the ordered array maintains a steady flow of liquids in the microchannels, suppressing the detrimental production of flow-blocking oxygen bubbles typical of randomly oriented nanosheet arrays. Controllable parallel arrays, fully covered fluffy-like ultrathin nanosheets, and amorphous disordered structures altogether enable full-scale design of hierarchical interfaces from the micro- to the atomic scale, significantly improving the otherwise sluggish kinetics of oxygen evolution toward industrial ultrafast production. Record-high ultrafast oxygen production of 135 L·min-1·m-2 with high working current of 4000 mA·cm-2 is steadily achieved at a competitively low cell voltage of 2.862 V. These results and related insights lay the basis for further developments in oriented nucleation and growth of crystals beyond classical nucleation approaches, with benefits for large-scale, industrial electrochemical processes as shown here for ultrafast oxygen production.

Interface engineering on super-hydrophilic amorphous/crystalline NiFe-based hydroxide/selenide heterostructure nanoflowers for accelerated industrial overall water splitting at high current density

Designing heterojunction catalysts with energy effects at the interface, particularly combining the surface structure advantages of super-hydrophilic interfaces with the high activity advantages of bimetal synergistic optimisation, is the key to developing economical and efficient industrial electrocatalytic water-splitting catalysts. In this study, a coupled nanoflower-like NiFe(OH)x/(Ni, Fe)Se heterostructure catalyst supported on Ni foam (NF) (NFSe@NFOH/NF) was designed and successfully prepared using hydrothermal and electrodeposition strategies. Owing to the electron interaction at the heterogeneous amorphous (NFOH)/crystalline (NFSe) interface and the bimetallic synergistic effect of Ni and Fe, the prepared NFSe@NFOH/NF exhibited excellent and stable oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) catalytic properties, with low overpotentials of 214/276 mV at 100 mA⋅cm-2 and 262/340 mV at 500 mA⋅cm-2. The assembled water electrolyser comprising NFSe@NFOH/NF || NFSe@NFOH/NF needed only small voltages of 1.73 and 1.85 V to yield current densities of 100 and 500 mA⋅cm-2, respectively. This study offers an innovative design idea for the rational adoption of interface engineering and amorphous-crystalline engineering techniques to construct catalysts with excellent catalytic activity and stability for electrocatalytic overall water splitting (EOWS) at a high current density, which further facilitates the advancement of sustainable energy technology in the future.

Elaborate tree-like Cu-Ag clusters from green electrodeposition for efficiently electrocatalyzing CO2 conversion into syngas

The electrocatalytic carbon dioxide reduction (CO2RR) is one of the emerging technologies that can effectively transform carbon dioxide (CO2) into valuable products. Electrocatalysts deriving from green synthesis methods will significantly help to establish a new green carbon cycle. Herein, a green electrodeposition method without additional reducing agents was used to synthesize Cu-Ag bimetallic catalysts, and it is shown that the combination of Cu and Ag obviously affects the morphology of the Cu-Ag catalysts, resulting in the formation of elaborate tree-like Cu-Ag clusters. An as-deposited Cu-Ag/carbon fiber (Cu-Ag/CF) catalyst exhibits high activity, selectivity and stability toward the CO2RR; in particular, the elaborate dendritic Cu-Ag/CF can efficiently reduce CO2 to syngas with high selectivity (Faradaic efficiency (FE) > 95%) at a low onset potential (-0.5 V). This work provides a rational strategy to overcome the significantly different reaction capacities during the reduction of Ag+ and Cu2+, leading to the formation of a controlled morphology of Cu-Ag, which is favourable for the design and development of highly efficient Cu or Ag catalysts via green methods for electrocatalyzing the CO2RR.

Grain Boundary Effects of Hierarchical Ni-Fe (Oxy)hydroxide Nanosheets in Water Oxidation

The robust and scalable oxygen evolution electrocatalysts that can deliver high current densities at low applied potential is a great challenge for the large-scale industrial application in hydrogen production. Here, the preparation of a grain-boundary-rich Ni-Fe (oxy)hydroxide catalyst on Ni foam is reported using a scalable coating approach followed by a chemical precipitating treatment. This facile method effectively assembles the hierarchical Ni-Fe (oxy)hydroxide nanosheet in the ultrasmall crystalline domains (<4 nm) with rich grain boundaries. The hierarchical nanosheet structure with the grain boundaries provides more accessible catalytic sites, facile charge, and mass transfer. Benefiting from the abundant grain boundaries in the hierarchical nanosheets, the as-prepared Ni-Fe (oxy)hydroxide electrodes deliver current densities of 500 and 1000 mA cm-2 at overpotentials of only 278 and 296 mV for the oxygen evolution reaction. The prepared electrode also exhibits long-term durability at a high current density in alkaline conditions.

Interfacial microenvironment modulation enhancing catalytic kinetics of CoNiP@NiFe LDH heterostructures for highly efficient oxygen evolution reaction

The development of highly active and robust OER catalysts is the key to address the constraints on the efficiency of electrocatalytic water splitting technology. Herein, CoNi-pristine was synthesized by a simple hydrothermal method, further phosphorylation treatment and construction of heterojunctions to synthesize efficient oxygen evolution catalysts. The OER catalytic performance of the material was greatly enhanced by the advantages of proper self-supporting 3D morphology, formation of heterogeneous interfaces and the synergistic effect of CoNiP and NiFe LDH. In 1 M KOH, CoNiP@NiFe LDH/NF only requires an overpotential of 207 mV to reach a current density of 10 mA cm-2 and operates at high current densities for more than 120 h without significant decay. It provides assistance for the rational design of interface-engineered heterostructures based on the synthesis of OER catalysts with high catalytic activity.

Amazing enhancement of OER performances: creating a well-designed functional Ni and N-doped carbon layer as a support material for fabricating a NiFe-LDH electrocatalyst

A well-designed support material between catalyst and substrate can always significantly enhance the performance of an electrode on water oxidation. In this work, a functional Ni and N-doped carbon layer (NNC) was designed on carbon paper (CP) via pyrolysis by using a controlled electrodeposited polyporphyrin as a precursor. Consequently, the fabricated NiFe-LDH/NNC/CP achieved a catalytic current density of 100 mA cm-2 at a small overpotential of 231 mV with a low Tafel slope of 26.0 mV dec-1, as well as high durability for more than 360 h. The insights are that N-doping reinforces the hydrophilicity and the catalyst binding capacity, while Ni-doping intensifies the conductivity.

Recent Progress on Electrode Design for Efficient Electrochemical Valorisation of CO2 , O2 , and N2

CO2 reduction, two-electron O2 reduction, and N2 reduction are sustainable technologies to valorise common molecules. Their further development requires working electrode design to promote the multistep electrochemical processes from gas reactants to value-added products at the device level. This review proposes critical features of a desirable electrode based on the fundamental electrochemical processes and the development of scalable devices. A detailed discussion is made to approach such a desirable electrode, addressing the recent progress on critical electrode components, assembly strategies, and reaction interface engineering. Further, we highlight the electrode design tailored to reaction properties (e.g., its thermodynamics and kinetics) for performance optimisation. Finally, the opportunities and remaining challenges are presented, providing a framework for rational electrode design to push these gas reduction reactions towards an improved technology readiness level (TRL).

Phase Engineering and Synchrotron-Based Study on Two-Dimensional Energy Nanomaterials

In recent years, there has been significant interest in the development of two-dimensional (2D) nanomaterials with unique physicochemical properties for various energy applications. These properties are often derived from the phase structures established through a range of physical and chemical design strategies. A concrete analysis of the phase structures and real reaction mechanisms of 2D energy nanomaterials requires advanced characterization methods that offer valuable information as much as possible. Here, we present a comprehensive review on the phase engineering of typical 2D nanomaterials with the focus of synchrotron radiation characterizations. In particular, the intrinsic defects, atomic doping, intercalation, and heterogeneous interfaces on 2D nanomaterials are introduced, together with their applications in energy-related fields. Among them, synchrotron-based multiple spectroscopic techniques are emphasized to reveal their intrinsic phases and structures. More importantly, various in situ methods are employed to provide deep insights into their structural evolutions under working conditions or reaction processes of 2D energy nanomaterials. Finally, conclusions and research perspectives on the future outlook for the further development of 2D energy nanomaterials and synchrotron radiation light sources and integrated techniques are discussed.

Monolithic FAPbBr3 photoanode for photoelectrochemical water oxidation with low onset-potential and enhanced stability

Despite considerable research efforts on photoelectrochemical water splitting over the past decades, practical application faces challenges by the absence of efficient, stable, and scalable photoelectrodes. Herein, we report a metal-halide perovskite-based photoanode for photoelectrochemical water oxidation. With a planar structure using mesoporous carbon as a hole-conducting layer, the precious metal-free FAPbBr3 photovoltaic device achieves 9.2% solar-to-electrical power conversion efficiency and 1.4 V open-circuit voltage. The photovoltaic architecture successfully applies to build a monolithic photoanode with the FAPbBr3 absorber, carbon/graphite conductive protection layers, and NiFe catalyst layers for water oxidation. The photoanode delivers ultralow onset potential below 0 V versus the reversible hydrogen electrode and high applied bias photon-to-current efficiency of 8.5%. Stable operation exceeding 100 h under solar illumination by applying ultraviolet-filter protection. The photothermal investigation verifies the performance boost in perovskite photoanode by photothermal effect. This study is significant in guiding the development of photovoltaic material-based photoelectrodes for solar fuel applications.

Enhanced CO Affinity on Cu Facilitates CO2 Electroreduction toward Multi-Carbon Products

Electrochemical CO2 reduction reaction (CO2 RR) is a promising strategy for waste CO2 utilization and intermittent electricity storage. Herein, it is reported that bimetallic Cu/Pd catalysts with enhanced *CO affinity show a promoted CO2 RR performance for multi-carbon (C2+) production under industry-relevant high current density. Especially, bimetallic Cu/Pd-1% catalyst shows an outstanding CO2 -to-C2+ conversion with 66.2% in Faradaic efficiency (FE) and 463.2 mA cm-2 in partial current density. An increment in the FE ratios of C2+ products to CO  for Cu/Pd-1% catalyst further illuminates a preferable C2+ production. In situ Raman spectra reveal that the atop-bounded CO is dominated by low-frequency band CO on Cu/Pd-1% that leads to C2+ products on bimetallic catalysts, in contrast to the majority of high-frequency band CO on Cu that favors the formation of CO. Density function theory calculation confirms that bimetallic Cu/Pd catalyst enhances the *CO adsorption and reduces the Gibbs free energy of the CC coupling process, thereby favoring the formation of C2+ products.

Microstructure and Oxygen Evolution Property of Prussian Blue Analogs Prepared by Mechanical Grinding

Solvent-free mechanochemical synthesis of efficient and low-cost double perovskite (DP), like a cage of Prussian blue (PB) and PB analogs (PBAs), is a promising approach for different applications such as chemical sensing, energy storage, and conversion. Although the solvent-free mechanochemical grinding approach has been extensively used to create halide-based perovskites, no such reports have been made for cyanide-based double perovskites. Herein, an innovative solvent-free mechanochemical synthetic strategy is demonstrated for synthesizing Fe4[Fe(CN)6]3, Co3[Fe(CN)6]2, and Ni2[Fe(CN)6], where defect sites such as carbon-nitrogen vacancies are inherently introduced during the synthesis. Among all the synthesized PB analogs, the Ni analog manifests a considerable electrocatalytic oxygen evolution reaction (OER) with a low overpotential of 288 mV to obtain the current benchmark density of 20 mA cm-2. We hypothesize that incorporating defects, such as carbon-nitrogen vacancies, and synergistic effects contribute to high catalytic activity. Our findings pave the way for an easy and inexpensive large-scale production of earth-abundant non-toxic electrocatalysts with vacancy-mediated defects for oxygen evolution reaction.

Co2P nanowire arrays anchored on a 3D porous reduced graphene oxide matrix embedded in nickel foam for a high-efficiency hydrogen evolution reaction

Regulating the structural and interfacial properties of transition metal phosphides (TMPs) by coupling carbon-based materials with large surface areas to enhance hydrogen evolution reaction (HER) performance presents significant progress for water splitting technology. Herein, we constructed a composite substrate of a three-dimensional porous graphene oxide matrix (3D-GO) embedded in nickel foam (NF) to grow a Co2P electrocatalyst. Well-defined gladiolus-like Co2P nanowire arrays tightly anchored on the substrate show enhanced electrochemical characteristics for the hydrogen evolution reaction (HER) based on the promoting roles of 3D porous reduced GO (3D-rGO) derived from 3D-GO, which promotes the dispersion of active components, improves the rate of electron transfer, and facilitates the transport of water molecules. As a result, the obtained Co2P@3D-rGO/NF electrode exhibits superior HER activity in 1.0 M KOH media, achieving overpotentials of 36.5 and 264.7 mV at current densities of 10 and 100 mA cm-2, respectively. The electrode also has a low Tafel slope of 55.5 mV dec-1, a large electrochemical surface area, and small charge-transfer resistance, further revealing its mechanism of high intrinsic activity. Moreover, the electrode exhibits excellent HER stability and durability without surface morphology and chemical state changes.

Breaking the Activity and Stability Bottlenecks of Electrocatalysts for Oxygen Evolution Reactions in Acids

Oxygen evolution reaction (OER) is a cornerstone reaction for a variety of electrochemical energy conversion and storage systems such as water splitting, CO2 /N2 reduction, reversible fuel cells, and metal-air batteries. However, OER catalysis in acids suffers from extra sluggish kinetics due to the additional step of water dissociation along with its multiple electron transfer processes. Furthermore, OER catalysts often suffer from poor stability in harsh acidic electrolytes due to the severe dissolution/corrosion processes. The development of active and stable OER catalysts in acids is highly demanded. Here,  the recent advances in OER electrocatalysis in acids are reviewed and the key strategies are summarized to overcome the bottlenecks of activity and stability for both noble-metal-based and noble metal-free catalysts, including i) morphology engineering, ii) composition engineering, and iii) defect engineering. Recent achievements in operando characterization and theoretical calculations are summarized which provide an unprecedented understanding of the OER mechanisms regarding active site identification, surface reconstruction, and degradation/dissolution pathways. Finally, views are offered on the current challenges and opportunities to break the activity-stability relationships for acidic OER in mechanism understanding, catalyst design, as well as standardized stability and activity evaluation for industrial applications such as proton exchange membrane water electrolyzers and beyond.

High-performance alkaline water electrolyzers based on Ru-perturbed Cu nanoplatelets cathode

Alkaline electrolyzers generally produce hydrogen at current densities below 0.5 A/cm2. Here, we design a cost-effective and robust cathode, consisting of electrodeposited Ru nanoparticles (mass loading ~ 53 µg/cm2) on vertically oriented Cu nanoplatelet arrays grown on metallic meshes. Such cathode is coupled with an anode based on stacked stainless steel meshes, which outperform NiFe hydroxide catalysts. Our electrolyzers exhibit current densities as high as 1 A/cm2 at 1.69 V and 3.6 A/cm2 at 2 V, reaching the performances of proton-exchange membrane electrolyzers. Also, our electrolyzers stably operate in continuous (1 A/cm2 for over 300 h) and intermittent modes. A total production cost of US$2.09/kgH2 is foreseen for a 1 MW plant (30-year lifetime) based on the proposed electrode technology, meeting the worldwide targets (US$2-2.5/kgH2). Hence, the use of a small amount of Ru in cathodes (~0.04 gRu per kW) is a promising strategy to solve the dichotomy between the capital and operational expenditures of conventional alkaline electrolyzers for high-throughput operation, while facing the scarcity issues of Pt-group metals.

Preparation and characterization of PMT-TiO2-NTs@NiO-C/Sn-Sb composite electrodes by a two-step pulsed electrodeposition method for the degradation of crystalline violet

To overcome the limitations imposed by Sn-Sb electrodes, the titanium foam (PMT)-TiO₂-NTs@NiO-C/Sn-Sb composite electrodes with cubic crystal structure are synthesized by introducing NiO@C nanosheet arrays interlayer on the TiO₂-NTs/PMT matrix through hydrothermal and carbonization process. Then a two-step pulsed electrodeposition method is used to prepare the Sn-Sb coating. Benefiting from the advantages of stacked 2D layer-sheet structure, the obtained electrodes exhibit enhanced stability and conductivity. Synergy of inner and outer layers fabricated by different pulse times strongly influence the electrochemical catalytic properties of the PMT-TiO₂-NTs@NiO-C/Sn-Sb (Sn-Sb) electrode. Hence, the Sn-Sb (b0.5 h + w1 h) electrode is the optimal electrode to degrade the Crystalline Violet (CV). Next, the effect of the four experimental parameters (initial CV concentration, current density, pH value and supporting electrolyte concentration) on the degradation of CV by the electrode are investigated. The degradation of the CV is more sensitive to alkaline pH, and the rapid decolorization of CV when the pH is 10. Moreover, the possible electrocatalytic degradation pathway of CV is performed using HPLC-MS. Results from the tests show that the PMT-TiO₂-NTs/NiO@C/Sn-Sb (b0.5 h + w1 h) electrode is an interesting alternative material in industrial wastewater applications.

Tunable Method for the Preparation of Layered Double Hydroxide Nanoparticles and Mesoporous Mixed Metal Oxide Electrocatalysts for the Oxygen Evolution Reaction

Preparation of high-performance and durable electrocatalysts for anion exchange membrane water electrolysis is a crucial step toward the broad implementation of this technology. Here, we present an easily tunable, one-step hydrothermal method for the preparation of Ni-based (NiX, X = Co, Fe) layered double hydroxide nanoparticles (LDHNPs) for the oxygen evolution reaction (OER), using tris(hydroxymethyl)aminomethane (Tris-NH₂) for particle growth control. The LDHNPs are used as building blocks of mesoporous mixed metal oxides (MMOs) with a block copolymer template (Pluronic F127), followed by thermal treatment at 250 °C. NiX MMOs have a significantly larger surface area compared to the analogous LDHNPs. NiX LDHNPs and MMOs exhibit excellent performance and long-term cycling stability, making them promising OER catalysts. Moreover, this versatile method can be easily tailored and scaled up for the preparation of platinum group metal-free electrocatalysts for other reactions of interest, which highlights the relevance of this work to the field of electrocatalysis.

Vacancy effect on the electrocatalytic activity of LaMn1/2Co1/2O3-δ for hydrogen and oxygen evolution reactions

Development of efficient electrocatalysts for water splitting can be a significant step toward green hydrogen generation. In this work, a remarkable enhancement of electrocatalytic properties is achieved through the incorporation of oxygen-vacancies in a perovskite oxide, while maintaining the same structural framework. The oxygen-deficient material La₂MnCoO_6-δ (LaMn_0.5Co_0.5O_3-δ) is isostructural to the parent stoichiometric material, but shows drastically enhanced electrocatalytic properties for both half-reactions of water-splitting, namely hydrogen-evolution and oxygen-evolution reactions, due to the oxygen-vacancies.

Sulfidation and NaOH etching in CoFeAl LDH evolved catalysts for an efficient overall water splitting in an alkaline solution

In this study, a hierarchical interconnected porous metal sulfide heterostructure was synthesized from CoFeAl layered double hydroxides (LDHs) by a two-step hydrothermal process (sulfidation and a NaOH etching process). Among the as-made samples, the CoFeAl-T-NaOH electrode exhibited excellent oxygen and hydrogen evolution reaction catalytic activities with overpotentials of 344 mV and 197 mV at the current density of 100 mA cm^-2, respectively. Meanwhile, small Tafel slopes of 57.7 mV dec^-1 and 106.5 mV dec^-1 for water oxidation and hydrogen evolution were observed for the CoFeAl-T-NaOH, respectively. Serving as both the cathode and anode for overall water splitting, the CoFeAl-T-NaOH electrode reached a current density of 10 mA cm^-2 at a cell voltage of 1.65 V with excellent stability. The enhanced electrocatalytic activity could be attributed to: the hierarchical interconnected nanosheet structure facilitating mass transport; the porous structure promoting electrolyte infiltration and reactant transfer; the heterojunction accelerating charge transfer; and the synergistic effect between them. This study offered a new clue for in situ synthesizing porous transition-metal based heterojunction electrocatalysts with a careful tuning of the sequence of sulfuration and alkaline etching to enhance the electrocatalytic performance.

Recent Advances in Water-Splitting Electrocatalysts Based on Electrodeposition

Green hydrogen is being considered as a next-generation sustainable energy source. It is created electrochemically by water splitting with renewable electricity such as wind, geothermal, solar, and hydropower. The development of electrocatalysts is crucial for the practical production of green hydrogen in order to achieve highly efficient water-splitting systems. Due to its advantages of being environmentally friendly, economically advantageous, and scalable for practical application, electrodeposition is widely used to prepare electrocatalysts. There are still some restrictions on the ability to create highly effective electrocatalysts using electrodeposition owing to the extremely complicated variables required to deposit uniform and large numbers of catalytic active sites. In this review article, we focus on recent advancements in the field of electrodeposition for water splitting, as well as a number of strategies to address current issues. The highly catalytic electrodeposited catalyst systems, including nanostructured layered double hydroxides (LDHs), single-atom catalysts (SACs), high-entropy alloys (HEAs), and core-shell structures, are intensively discussed. Lastly, we offer solutions to current problems and the potential of electrodeposition in upcoming water-splitting electrocatalysts.

Ni electrodes with 3D-ordered surface structures for boosting bubble releasing toward high current density alkaline water splitting

The performance of alkaline water electrolysis (AWE) at high current densities is limited by gas bubble generation on the surface of electrodes, which covers active sites and blocks mass transfer, resulting in lower AWE efficiency. Here, we utilize electro-etching to construct Ni electrodes with hydrophilic and aerophobic surfaces to improve the efficiency of AWE. Ni atoms on the Ni surface can be exfoliated orderly along the crystal planes by electro-etching, forming micro-nano-scale rough surfaces with multiple crystal planes exposed. The 3D-ordered surface structures increase the exposure of active sites and promote the removal of bubbles on the surface of the electrode during the AWE process. In addition, experimental results from high-speed camera reveal that rapidly released bubbles can improve the local circulation of electrolyte. Lastly, the accelerated durability test based on practical working condition demonstrates that the 3D-ordered surface structures are robust and durable during the AWE process.

Ce Site in Amorphous Iron Oxyhydroxide Nanosheet toward Enhanced Electrochemical Water Oxidation

Iron oxyhydroxide has been considered an auspicious electrocatalyst for the oxygen evolution reaction (OER) in alkaline water electrolysis due to its suitable electronic structure and abundant reserves. However, Fe-based materials seriously suffer from the tradeoff between activity and stability at a high current density above 100 mA cm^-2 . In this work, the Ce atom is introduced into the amorphous iron oxyhydroxide (i.e., CeFeO_x H_y ) nanosheet to simultaneously improve the intrinsic electrocatalytic activity and stability for OER through regulating the redox property of iron oxyhydroxide. In particular, the Ce substitution leads to the distorted octahedral crystal structure of CeFeO_x H_y , along with a regulated coordination site. The CeFeO_x H_y electrode exhibits a low overpotential of 250 mV at 100 mA cm^-2 with a small Tafel slope of 35.1 mVdec^-1 . Moreover, the CeFeO_x H_y electrode can continuously work for 300 h at 100 mA cm^-2 . When applying the CeFeO_x H_y nanosheet electrode as the anode and coupling it with the platinum mesh cathode, the cell voltage for overall water splitting can be lowered to 1.47 V at 10 mA cm^-2 . This work offers a design strategy for highly active, low-cost, and durable material through interfacing high valent metals with earth-abundant oxides/hydroxides.

Construction of Nitrogen-Doped Biphasic Transition-Metal Sulfide Nanosheet Electrode for Energy-Efficient Hydrogen Production via Urea Electrolysis

Urea-assisted hybrid water splitting is a promising technology for hydrogen (H₂ ) production, but the lack of cost-effective electrocatalysts hinders its extensive application. Herein, it is reported that Nitrogen-doped Co₉ S₈ /Ni₃ S₂ hybrid nanosheet arrays on nickel foam (N-Co₉ S₈ /Ni₃ S₂ /NF) can act as an active and robust bifunctional catalyst for both urea oxidation reaction (UOR) and hydrogen evolution reaction (HER), which could drive an ultrahigh current density of 400 mA cm^-2 at a low working potential of 1.47 V versus RHE for UOR, and gives a low overpotential of 111 mV to reach 10 mA cm^-2 toward HER. Further, a hybrid water electrolysis cell utilizing the synthesized N-Co₉ S₈ /Ni₃ S₂ /NF electrode as both the cathode and anode displays a low cell voltage of 1.40 V to reach 10 mA cm^-2 , which can be powered by an AA battery with a nominal voltage of 1.5 V. The density functional theory (DFT) calculations decipher that N-doped heterointerfaces can synergistically optimize Gibbs free energy of hydrogen and urea, thus accelerating the catalytic kinetics of HER and UOR. This work significantly advances the development of the promising cobalt-nickel-based sulfide as a bifunctional electrocatalyst for energy-saving electrolytic H₂ production and urea-rich innocent wastewater treatment.

Lamella-heterostructured nanoporous bimetallic iron-cobalt alloy/oxyhydroxide and cerium oxynitride electrodes as stable catalysts for oxygen evolution

Developing robust nonprecious-metal electrocatalysts with high activity towards sluggish oxygen-evolution reaction is paramount for large-scale hydrogen production via electrochemical water splitting. Here we report that self-supported laminate composite electrodes composed of alternating nanoporous bimetallic iron-cobalt alloy/oxyhydroxide and cerium oxynitride (FeCo/CeO_2-xN_x) heterolamellas hold great promise as highly efficient electrocatalysts for alkaline oxygen-evolution reaction. By virtue of three-dimensional nanoporous architecture to offer abundant and accessible electroactive CoFeOOH/CeO_2-xN_x heterostructure interfaces through facilitating electron transfer and mass transport, nanoporous FeCo/CeO_2-xN_x composite electrodes exhibit superior oxygen-evolution electrocatalysis in 1 M KOH, with ultralow Tafel slope of ~33 mV dec^-1. At overpotential of as low as 360 mV, they reach >3900 mA cm^-2 and retain exceptional stability at ~1900 mA cm^-2 for >1000 h, outperforming commercial RuO₂ and some representative oxygen-evolution-reaction catalysts recently reported. These electrochemical properties make them attractive candidates as oxygen-evolution-reaction electrocatalysts in electrolysis of water for large-scale hydrogen generation.