Molecular helices as electron acceptors in high-performance bulk heterojunction solar cells

High Performance As-Cast Organic Solar Cells Enabled by a Refined Double-Fibril Network Morphology and Improved Dielectric Constant of Active Layer

High performance organic solar cells (OSCs) are usually realized by using post-treatment and/or additive, which can induce the formation of metastable morphology, leading to unfavorable device stability. In terms of the industrial production, the development of high efficiency as-cast OSCs is crucially important, but it remains a great challenge to obtain appropriate active layer morphology and high power conversion efficiency (PCE). Here, efficient as-cast OSCs are constructed via introducing a new polymer acceptor PY-TPT with a high dielectric constant into the D18:L8-BO blend to form a double-fibril network morphology. Besides, the incorporation of PY-TPT enables an enhanced dielectric constant and lower exciton binding energy of active layer. Therefore, efficient exciton dissociation and charge transport are realized in D18:L8-BO:PY-TPT-based device, affording a record-high PCE of 18.60% and excellent photostability in absence of post-treatment. Moreover, green solvent-processed devices, thick-film (300 nm) devices, and module (16.60 cm2) are fabricated, which show PCEs of 17.45%, 17.54%, and 13.84%, respectively. This work brings new insight into the construction of efficient as-cast devices, pushing forward the practical application of OSCs.

Delocalizing Excitation for Highly-Active Organic Photovoltaic Catalysts

Localized excitation in traditional organic photocatalysts typically prevents the generation and extraction of photo-induced free charge carriers, limiting their activity enhancement under illumination. Here, we enhance delocalized photoexcitation of small molecular photovoltaic catalysts by weakening their electron-phonon coupling via rational fluoro-substitution. The optimized 2FBP-4F catalyst we develop here exhibits a minimized Huang-Rhys factor of 0.35 in solution, high dielectric constant and strong crystallization in the solid state. As a result, the energy barrier for exciton dissociation is decreased, and more importantly, polarons are unusually observed in 2FBP-4F nanoparticles (NPs). With the increased hole transfer efficiency and prolonged charge carrier lifetime highly related to enhanced exciton delocalization, the PM6 : 2FBP-4F heterojunction NPs at varied concentration exhibit much higher optimized photocatalytic activity (207.6-561.8 mmol h-1 g-1) for hydrogen evolution than the control PM6 : BP-4F and PM6 : 2FBP-6F NPs, as well as other reported photocatalysts under simulated solar light (AM 1.5G, 100 mW cm-2).

Air-Stable Perylene Diimide Trimer Material for N-Type Organic Electrochemical Transistors

A new method is reported to make air-stable n-type organic mixed ionic-electronic conductor (OMIEC) films for organic electrochemical transistors (OECTs) using a solution-processable small molecule helical perylene diimide trimer, hPDI[3]-C11. Alkyl side chains are attached to the conjugated core for processability and film making, which are then cleaved via thermal annealing. After the sidechains are removed, the hPDI[3] film becomes less hydrophobic, more ordered, and has a deeper lowest unoccupied molecular orbital (LUMO). These features provide improved ionic transport, greater electronic mobility, and increased stability in air and in aqueous solution. Subsequently, hPDI[3]-H is used as the active material in OECTs and a device with a transconductance of 44 mS, volumetric capacitance of ≈250 F cm-3, µC* value of 1 F cm-1 V-1 s-1, and excellent stability (> 5 weeks) is demonstrated. As proof of their practical applications, a hPDI[3]-H-based OECTs as a glucose sensor and electrochemical inverter is utilized. The approach of side chain removal after film formation charts a path to a wide range of molecular semiconductors to be used as stable, mixed ionic-electronic conductors.

Recent progress and prospects of dimer and multimer acceptors for efficient and stable polymer solar cells

High power conversion efficiency (PCE) and long-term stability are essential prerequisites for the commercialization of polymer solar cells (PSCs). Small-molecule acceptors (SMAs) are core materials that have led to recent, rapid increases in the PCEs of the PSCs. However, a critical limitation of the resulting PSCs is their poor long-term stability. Blend morphology degradation from rapid diffusion of SMAs with low glass transition temperatures (Tgs) is considered the main cause of the poor long-term stability of the PSCs. The recent emergence of oligomerized SMAs (OSMAs), composed of two or more repeating SMA units (i.e., dimerized and trimerized SMAs), has shown great promise in overcoming these challenges. This innovation in material design has enabled OSMA-based PSCs to reach impressive PCEs near 19% and exceptional long-term stability. In this review, we summarize the evolution of OSMAs, including their research background and recent progress in molecular design. In particular, we discuss the mechanisms for high PCE and stability of OSMA-based PSCs and suggest useful design guidelines for high-performance OSMAs. Furthermore, we reflect on the existing hurdles and future directions for OSMA materials towards achieving commercially viable PSCs with high PCEs and operational stabilities.

Fusing perylene diimide with helicenes

Incorporating perylene diimide (PDI) units into helicene structures has become a useful strategy for giving access to non-planar electron acceptors as well as a method of creating molecules with unique and intriguing chiroptical properties. This minireview describes this fusion of PDIs with helicenes.

Molecular engineering of nitrogen-rich helicene based organic semiconductors for stable perovskite solar cells

Polycyclic heteroaromatics play a pivotal role in advancing the field of high-performance organic semiconductors. In this study, we report the synthesis of a pyrrole-bridged double azahelicene through intramolecular oxidative cyclization. By incorporating bis(4-methoxyphenyl)amine (OMeDPA) and ethylenedioxythiophene-phenyl-OMeDPA (EP-OMeDPA) into the sp3-nitrogen rich double helicene framework, we have successfully constructed two organic semiconductors with ionization potentials suitable for application in perovskite solar cells. The amorphous films of both organic semiconductors exhibit hole density-dependent mobility and conductivity. Notably, the organic semiconductor utilizing EP-OMeDPA as the electron donor demonstrates superior hole mobility at a given hole density, which is attributed to reduced reorganization energy and increased centroid distance. Moreover, this organic semiconductor exhibits a remarkably elevated glass transition temperature of up to 230 °C and lower diffusivity for external small molecules and ions. When employed as the p-doped hole transport layer in perovskite solar cells, TMDAP-EP-OMeDPA achieves an improved average efficiency of 21.7%. Importantly, the solar cell with TMDAP-EP-OMeDPA also demonstrates enhanced long-term operational stability and storage stability at 85 °C. These findings provide valuable insights into the development of high-performance organic semiconductors, contributing to the practical application of perovskite solar cells.

Synthesis and Characterization of the Donor-Acceptor Conjugated Polymer PBDB-T Implementing Group IV Element Germanium

Here, we synthesized and characterized a novel two-dimensional (2D) conjugated electron donor-acceptor (D-A) copolymer (PBDB-T-Ge), wherein the substituent of triethyl germanium was added to the electron donor unit of the polymer. The Turbo-Grignard reaction was used to implement the group IV element into the polymer, resulting in a yield of 86%. This corresponding polymer, PBDB-T-Ge, exhibited a down-shift in the highest occupied molecular orbital (HOMO) level to -5.45 eV while the lowest unoccupied molecular orbital (LUMO) level was -3.64 eV. The peaks in UV-Vis absorption and the PL emission of PBDB-T-Ge were observed at 484 nm and 615 nm, respectively.

Intramolecular and Intermolecular Interaction Switching in the Aggregates of Perylene Diimide Trimer: Effect of Hydrophobicity

The research on perylene diimide (PDI) aggregates effectively promotes their applications in organic photovoltaic solar cells and fluorescent sensors. In this paper, a PDI fabricated with three peripheral PDI units (N, N’-bis(6-undecyl) perylene-3,4,9,10-bis(dicarboximide)) is investigated. The trimer shows different absorption and fluorescence properties due to hydrophobicity when dissolved in the mixed solvent of tetrahydrofuran (THF) and water. Through comprehensive analysis of the fluorescence lifetime and transient absorption spectroscopic results, we concluded that the trimer underwent different excited state kinetic pathways with different concentrations of water in THF. When dissolved in pure THF solvent, both the intramolecular charge-transfer and excimer states are formed. When the water concentration increases from 0 to 50% (v/v), the formation time of the excimer state and its structural relaxation time are prolonged, illustrating the arising of the intermolecular excimer state. It is interesting to determine that the probability of the intramolecular charge-transfer pathway will first decrease and then increase as the speed of intermolecular excimer formation slows down. The two inflection points appear when the water concentration is above 10% and 40%. The results not only highlight the importance of hydrophobicity on the aggregate properties of PDI multimers but also guide the further design of PDI-based organic photovoltaic solar cells.

Perylene Diimide-based Non-fullerene Acceptors With A-D-A'-D-A Architecture For Organic Solar Cells

The vinylene-bridged helical PDI dimer (PDI2) has been an alternative PDI building block for non-fullerene acceptor (NFAs). However, the development of PDI2 derivatives still lag behind, and most of PDI2 derivatives based organic solar cells (OSCs) only achieved a moderate power conversion efficiencies (PCE) of less than 8%. In this contribution, an acceptor-donor-acceptor-donor-acceptor (A-D-A'-D-A) architecture was introduced to facilitate the improvement of photovoltaic properties. Two acceptors named diIDTIC-PDI2 and diFIDTIC-PDI2 were designed and synthesized, in which a PDI2 moiety flanked with two indacenodithiophene (IDT) units was employed as the D-A'-D core and 2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC) or fluorinated IC (IC2F) acted as terminal groups, respectively. The photovoltaic performances of these two acceptors were explored using PM1 as the electron donor. Compared to diIDTIC-PDI2, the fluorinated diFIDTIC-PDI2 based OSCs obtained enhanced photovoltaic performance with the best PCE of 9.77%, a V_OC of 0.957 V, J_SC of 13.58 mA cm^-2 and FF of 75.1%. These results illustrate that engineering terminal groups is a robust strategy of enhancing the efficiency of PDI based acceptors with A-D-A'-D-A architecture.

Electronic Materials: An Antiaromatic Propeller Made from the Four-Fold Fusion of Tetraoxa[8]circulene and Perylene Diimides

The synthesis of an antiaromatic tetraoxa[8]circulene annulated with four perylene diimides (PDI), giving a dynamic non-planar π-conjugated system, is described. The molecule contains 32 aromatic rings surrounding one formally antiaromatic planarized cyclooctatetraene (COT). The intense absorption (ϵ=3.35×10⁵  M^-1  cm^-1 in CH₂ Cl₂ ) and emission bands are assigned to internal charge-transfer transitions in the combined PDI-circulene π-system. The spectroscopic data is supported by density functional theory calculations, and nuclear independent chemical shift calculation indicate that the antiaromatic COT has increased aromaticity in the reduced state. Electrochemical studies show that the compound can reversibly reach the tetra- and octa-anionic states by reduction of the four PDI units, and the deca-anionic state by reduction of the central COT ring. The material functions effectively in bulk hetero junction solar cells as a non-fullerene acceptor, reaching a power conversion efficiency of 6.4 %.

Remote Control of Dynamic Twistacene Chirality

We report a reliable way to manipulate the dynamic, axial chirality in perylene diimide (PDI)-based twistacenes. Specifically, we reveal how chiral substituents on the imide position induce the helicity in a series of PDI-based twistacenes. We demonstrate that this remote chirality is able to control the helicity of flexible [4]helicene subunits by UV-vis, CD spectroscopy, X-ray crystallography, and TDDFT calculations. Furthermore, we have discovered that both the chiral substituent and the solvent each has a strong impact on the sign and intensity of the CD signals, highlighting the control of the dynamic helicity in this flexible system. DFT calculations suggest that the steric interaction of the chiral substituents is the important factor in how well a particular group is at inducing a preferred helicity.

Development of non-fullerene electron acceptors for efficient organic photovoltaics

Compared to fullerene based electron acceptors, n-type organic semiconductors, so-called non-fullerene acceptors (NFAs), possess some distinct advantages, such as readily tuning of optical absorption and electronic energy levels, strong absorption in the visible region and good morphological stability for flexible electronic devices. The design and synthesis of new NFAs have enabled the power conversion efficiencies (PCEs) of organic photovoltaic (OPV) devices to increase to around 19%. This review summarises the important breakthroughs that have contributed to this progress, focusing on three classes of NFAs, i.e. perylene diimide (PDI), diketopyrrolopyrrole (DPP) and acceptor–donor–acceptor (A-D-A) based NFAs. Specifically, the PCEs of PDI, DPP, and A-D-A series based non-fullerene OPVs have been reported up to 11%, 13% and 19%, respectively. Structure–property relationships of representative NFAs and their impact on OPV performances are discussed. Finally, we consider the remaining challenges and promising directions for achieving high-performing NFAs.

Binary Organic Solar Cells Breaking 19% via Manipulating the Vertical Component Distribution

The variation of the vertical component distribution can significantly influence the photovoltaic performance of organic solar cells (OSCs), mainly due to its impact on exciton dissociation and charge-carrier transport and recombination. Herein, binary devices are fabricated via sequential deposition (SD) of D18 and L8-BO materials in a two-step process. Upon independently regulating the spin-coating speeds of each layer deposition, the optimal SD device shows a record power conversion efficiency (PCE) of 19.05% for binary single-junction OSCs, much higher than that of the corresponding blend casting (BC) device (18.14%). Impressively, this strategy presents excellent universality in boosting the photovoltaic performance of SD devices, exemplified by several nonfullerene acceptor systems. The mechanism studies reveal that the SD device with preferred vertical components distribution possesses high crystallinity, efficient exciton splitting, low energy loss, and balanced charge transport, resulting in all-around enhancement of photovoltaic performances. This work provides a valuable approach for high-efficiency OSCs, shedding light on understanding the relationship between photovoltaic performance and vertical component distribution.

Molecular Carbon Imides

The creation and development of new forms of nanocarbons have fundamentally transformed the scientific landscape in the past three decades. As new members of the nanocarbon family with accurate size, shape, and edge structure, molecular carbon imides (MCIs) have shown unexpected and unique properties. Particularly, the imide functionalization strategy has endowed these rylene-based molecular carbons with fascinating characteristics involving flexible syntheses, tailor-made structures, diverse properties, excellent processability, and good stability. This Perspective elaborates molecular design evolution to functional landscapes, and illustrative examples are given, including a promising library of multi-size and multi-dimensional MCIs with rigidly conjugated π-architectures, ranging from 1D nanoribbon imides and 2D nanographene imides to cross-dimensional MCIs. Although researchers have achieved substantial progress in using MCIs as functional components for exploration of charge transport, photoelectric conversion, and chiral luminescence performances, they are far from unleashing their full potential. Developing highly efficient and regioselective coupling/ring-closure reactions involving the formation of multiple C-C bonds and the annulation of electron-deficient aromatic units is crucial. Prediction by theory with the help of machine learning and artificial intelligence research along with reliable nanotechnology characterization will give an impetus to the blossom of related fields. Future investigations will also have to advance toward─or even focus on─the emerging potential functions, especially in the fields of chiral electronics and spin electronics, which are expected to open new avenues.

Design Rules of the Mixing Phase and Impacts on Device Performance in High-Efficiency Organic Photovoltaics

In nonfullerene acceptor- (NFA-) based solar cells, the exciton splitting takes place at both domain interface and donor/acceptor mixture, which brings in the state of mixing phase into focus. The energetics and morphology are key parameters dictating the charge generation, diffusion, and recombination. It is revealed that tailoringthe electronic properties of the mixing region by doping with larger-bandgap components could reduce the density of state but elevate the filling state level, leading to improved open-circuit voltage (V_OC) and reduced recombination. The monomolecular and bimolecular recombinations are shown to be intercorrelated, which show a Gaussian-like relationship with V_OC and linear relationship with short-circuit current density (J_SC) and fill factor (FF). The kinetics of hole transfer and exciton diffusion scale with J_SC similarly, indicating the carrier generation in mixing region and crystalline domain are equally important. From the morphology perspective, the crystalline order could contribute to V_OC improvement, and the fibrillar structure strongly affects the FF. These observations highlight the importance of the mixing region and its connection with crystalline domains and point out the design rules to optimize the mixing phase structure, which is an effective approach to further improve device performance.

Non-Halogenated Solvents and Layer-by-Layer Blade-Coated Ternary Organic Solar Cells via Cascade Acceptor Adjusting Morphology and Crystallization to Reduce Energy Loss

The power conversion efficiency (PCE) of halogenated solvent spin-coated organic solar cells (OSCs) has been boosted to a high level (>18%) by developing efficient photovoltaic materials and precise morphological control. However, the PCE of OSCs prepared from non-halogenated solvents and with a scalable printing process is far behind, limited by tough morphology manipulation. Herein, we have fabricated ternary OSCs by using layer-by-layer (LBL) blade-coating and a non-halogenated solvent. The ternary OSCs based on the PM6:IT-M(1:0.2)/BTP-eC9 active layer are processed with the hydrocarbon solvent 1,2,4-trimethylbenzene with no need of any additives and post-treatment. The vertical donor/acceptor distribution is optimized by LBL blade-coating within the PM6:IT-M(1:0.2)/BTP-eC9 active layer. The cascade acceptor IT-M blended in PM6 not only attenuates the damage of BTP-eC9 to the PM6 crystallization, leading to a dense nanofiber-like morphology, but also prefers to reside between PM6 and BTP-eC9 to form a cascade energy level alignment for a fast charge-transfer process. Finally, the improved morphology and crystallization lead to a reduced molecular recombination, low energy loss, and high open-circuit voltage. The prepared non-halogenated solvent and LBL blade-coated OSCs achieve a PCE of 17.16%. The work provides an approach to fabricate hydrocarbon solvent-processed high-performance OSCs by employing LBL blade-coating and a ternary strategy.

Doubling the Length of the Longest Pyrene-Pyrazinoquinoxaline Molecular Nanoribbons

Molecular nanoribbons are a class of atomically‐precise nanomaterials for a broad range of applications. An iterative approach that allows doubling the length of the longest pyrene‐pyrazinoquinoxaline molecular nanoribbons is described. The largest nanoribbon obtained through this approach—with a 60 linearly‐fused ring backbone (14.9 nm) and a 324‐atoms core (C₂₇₆N₄₈)—shows an extremely high molar absorptivity (values up to 1 198 074 M⁻¹ cm⁻¹) that also endows it with a high molar fluorescence brightness (8700 M⁻¹ cm⁻¹).

Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology

In organic photovoltaics, morphological control of donor and acceptor domains on the nanoscale is the key for enabling efficient exciton diffusion and dissociation, carrier transport and suppression of recombination losses. To realize this, here, we demonstrated a double-fibril network based on a ternary donor-acceptor morphology with multi-length scales constructed by combining ancillary conjugated polymer crystallizers and a non-fullerene acceptor filament assembly. Using this approach, we achieved an average power conversion efficiency of 19.3% (certified 19.2%). The success lies in the good match between the photoelectric parameters and the morphological characteristic lengths, which utilizes the excitons and free charges efficiently. This strategy leads to an enhanced exciton diffusion length and a reduced recombination rate, hence minimizing photon-to-electron losses in the ternary devices as compared to their binary counterparts. The double-fibril network morphology strategy minimizes losses and maximizes the power output, offering the possibility of 20% power conversion efficiencies in single-junction organic photovoltaics.

Simultaneous Tuning of Alkyl Chains and End Groups in Non-fused Ring Electron Acceptors for Efficient and Stable Organic Solar Cells

Fine-tuning the alkyl chains and end groups of non-fused ring electron acceptors (NFREAs) plays vital roles in the promotion of charge transfer (CT) and power conversion efficiency (PCE). In this work, we developed a series of A-D-A'-D-A-type NFREAs, which possess the same terminals (A), the cyclopentadithiophene unit (D), and the thieno[3,4-c]pyrrole-4,6-dione (A'). Despite the subtle difference in side chains and halogenated end groups, the six acceptors exhibit a considerable difference in the efficiency and device stability of the organic solar cells (OSCs). Among the molecules, chlorinated NFREAs show a broader light absorption than the fluorinated ones do. Compared with C8C8-4F (1-octylnonyl and fluorination) and C6C4-4Cl (2-butyloctyl and chlorination), C8C8-4Cl (1-octylnonyl and chlorination) exhibits a lower highest occupied molecular orbital level, higher electron mobility, and denser molecular packing. The OSCs based on PM6:C8C8-4Cl yield the best PCE of 14.11%, which is attributed to the faster charge transport, high miscibility, and preferable morphology. Moreover, the PM6:C8C8-4Cl devices retain 91.1% of the initial PCE after being placed in air with 67% relative humidity for 50 days. This work shows that the simultaneous optimization of side chains and end groups facilitates the CT and improves the stability in the OSCs, offering a novel view into the molecular design of A-D-A'-D-A-type NFREAs.

Depositing Molecular Graphene Nanoribbons on Ag(111) by Electrospray Controlled Ion Beam Deposition: Self-Assembly and On-Surface Transformations

The chemical processing of low‐dimensional carbon nanostructures is crucial for their integration in future devices. Here we apply a new methodology in atomically precise engineering by combining multistep solution synthesis of N‐doped molecular graphene nanoribbons (GNRs) with mass‐selected ultra‐high vacuum electrospray controlled ion beam deposition on surfaces and real‐space visualisation by scanning tunnelling microscopy. We demonstrate how this method yields solely a controllable amount of single, otherwise unsublimable, GNRs of 2.9 nm length on a planar Ag(111) surface. This methodology allows for further processing by employing on‐surface synthesis protocols and exploiting the reactivity of the substrate. Following multiple chemical transformations, the GNRs provide reactive building blocks to form extended, metal–organic coordination polymers.

Understanding, quantifying, and controlling the molecular ordering of semiconducting polymers: from novices to experts and amorphous to perfect crystals

Molecular packing and texture of semiconducting polymers are often critical to the performance of devices using these materials. Although frameworks exist to quantify the ordering, interpretations are often just qualitative, resulting in imprecise use of terminology. Here, we reemphasize the significance of quantifying molecular ordering in terms of degree of crystallinity (volume fractions that are ordered) and quality of ordering and their relation to the size scale of an ordered region. We are motivated in part by our own imprecise and inconsistent use of terminology in the past, as well as the need to have a primer or tutorial reference to teach new group members. We strive to develop and use consistent terminology with regards to crystallinity, semicrystallinity, paracrystallinity, and related characteristics. To account for vastly different quality of ordering along different directions, we classify paracrystals into 2D and 3D paracrystals and use paracrystallite to describe the spatial extent of molecular ordering in 1-10 nm. We show that a deeper understanding of molecular ordering can be achieved by combining grazing-incidence wide-angle X-ray scattering and differential scanning calorimetry, even though not all aspects of these measurements are consistent, and some classification appears to be method dependent. We classify a broad range of representative polymers under common processing conditions into five categories based on the quantitative analysis of the paracrystalline disorder parameter (g) and thermal transitions. A small database is presented for 13 representative conjugated and insulating polymers ranging from amorphous to semi-paracrystalline. Finally, we outline the challenges to rationally design more perfect polymer crystals and propose a new molecular design approach that envisions conceptual molecular grafting that is akin to strained and unstrained hetero-epitaxy in classic (compound) semiconductors thin film growth.

Correlating Electronic Structure and Device Physics with Mixing Region Morphology in High-Efficiency Organic Solar Cells

The donor/acceptor interaction in non-fullerene organic photovoltaics leads to the mixing domain that dictates the morphology and electronic structure of the blended thin film. Initiative effort is paid to understand how these domain properties affect the device performances on high-efficiency PM6:Y6 blends. Different fullerenes acceptors are used to manipulate the feature of mixing domain. It is seen that a tight packing in the mixing region is critical, which could effectively enhance the hole transfer and lead to the enlarged and narrow electron density of state (DOS). As a result, short-circuit current (J_SC ) and fill factor (FF) are improved. The distribution of DOS and energy levels strongly influences open-circuit voltage (V_OC ). The raised filling state of electron Fermi level is seen to be key in determining device V_OC . Energy disorder is found to be a key factor to energy loss, which is highly correlated with the intermolecular distance in the mixing region. A 17.53% efficiency is obtained for optimized ternary devices, which is the highest value for similar systems. The current results indicate that a delicate optimization of the mixing domain property is an effective route to improve the V_OC , J_SC , and FF simultaneously, which provides new guidelines for morphology control toward high-performance organic solar cells.

Progress in perylene diimides for organic solar cell applications

This paper summarizes the application of PDI molecules in organic solar cells in recent years, detailing the strategies and approaches of molecular design and their application effects.

Structural symmetry-breaking of perylene diimide acceptor at N-position for enhanced photovoltaic performance

The vinylene-bridged helical perylene diimide dimer (PDI2) and derivatives have received considerable attention for application in nonfullerene organic solar cells (OSCs). Benefit from the large natural dipole moment and the...

High-Performance Organic Electronic Materials by Contorting Perylene Diimides

Perylene diimide (PDI) is a workhorse of the organic electronics community. However, the vast majority of designs that include PDI substitute the core with various functional groups to encourage intimate cofacial contacts between largely planar PDIs. Over the past several years, we have observed the counterintuitive result that contorting the planar aromatic core of PDI leads to higher performing photovoltaics, photodetectors, batteries, and other organic electronic devices. In this Perspective, we describe how different modes of contortion can be reliably installed into PDI-based molecules, oligomers, and polymers. We also describe how these different contortions modify the observed optical and electronic properties of PDI. For instance, contorting PDIs into bowls leads to high-efficiency singlet fission materials, while contorting PDIs into helicene-like structures leads to nonlinear amplification of Cotton effects, culminating in the highest g-factors so far observed for organic compounds. Finally, we show how these unique optoelectronic properties give rise to higher performance organic electronic devices. We specifically note how the three-dimensional structure of these contorted aromatic molecules is responsible for the enhancements in performance we observe. Throughout this Perspective, we highlight opportunities for continued study in this rapidly developing organic materials frontier.

Spontaneous exciton dissociation enables spin state interconversion in delayed fluorescence organic semiconductors

Engineering a low singlet-triplet energy gap (ΔEST) is necessary for efficient reverse intersystem crossing (rISC) in delayed fluorescence (DF) organic semiconductors but results in a small radiative rate that limits performance in LEDs. Here, we study a model DF material, BF2, that exhibits a strong optical absorption (absorption coefficient = 3.8 × 105 cm-1) and a relatively large ΔEST of 0.2 eV. In isolated BF2 molecules, intramolecular rISC is slow (delayed lifetime = 260 μs), but in aggregated films, BF2 generates intermolecular charge transfer (inter-CT) states on picosecond timescales. In contrast to the microsecond intramolecular rISC that is promoted by spin-orbit interactions in most isolated DF molecules, photoluminescence-detected magnetic resonance shows that these inter-CT states undergo rISC mediated by hyperfine interactions on a ~24 ns timescale and have an average electron-hole separation of ≥1.5 nm. Transfer back to the emissive singlet exciton then enables efficient DF and LED operation. Thus, access to these inter-CT states, which is possible even at low BF2 doping concentrations of 4 wt%, resolves the conflicting requirements of fast radiative emission and low ΔEST in organic DF emitters.

Designs and understanding of small molecule-based non-fullerene acceptors for realizing commercially viable organic photovoltaics

Organic photovoltaics (OPVs) have emerged as a promising next-generation technology with great potential for portable, wearable, and transparent photovoltaic applications. Over the past few decades, remarkable advances have been made in non-fullerene acceptor (NFA)-based OPVs, with their power conversion efficiency exceeding 18%, which is close to the requirements for commercial realization. Novel molecular NFA designs have emerged and evolved in the progress of understanding the physical features of NFA-based OPVs in relation to their high performance, while there is room for further improvement. In this review, the molecular design of representative NFAs is described, and their blend characteristics are assessed via statistical comparisons. Meanwhile, the current understanding of photocurrent generation is reviewed along with the significant physical features observed in high-performance NFA-based OPVs, while the challenging issues and the strategic perspectives for the commercialization of OPV technology are also discussed.

Twisted Molecular Nanoribbons with up to 53 Linearly-Fused Rings

The synthesis of three molecular nanoribbons with a twisted aromatic framework is described. The largest one shows a 53 linearly fused rings backbone (12.9 nm) and 322 conjugated atoms in its aromatic core (C₂₉₆N₂₄S₂). This new family of nanoribbons shows extremely high molar absorptivities, reaching 986 100 M^-1 cm^-1, and red-emitting properties.

High-Efficiency Organic Photovoltaics using Eutectic Acceptor Fibrils to Achieve Current Amplification

The intrinsic electronic properties of donor (D) and acceptor (A) materials in coupling with morphological features dictate the output in organic solar cells (OSCs). New physical properties of intimate eutectic mixing are used in nonfullerene-acceptor-based D-A₁ -A₂ ternary blends to fine-tune the bulk heterojunction thin film morphology as well as their electronic properties. With enhanced thin film crystallinity and improved carrier transport, a significant J_SC amplification is achieved due to the formation of eutectic fibrillar lamellae and reduced defects state density. Material wise, aligned cascading energy levels with much larger driving force, and suppressed recombination channels confirm efficient charge transfer and transport, enabling an improved power conversion efficiency (PCE) of 17.84%. These results reveal the importance of utilizing specific material interactions to control the crystalline habit in blended films to form a well-suited morphology in guiding superior performances, which is of high demand in the next episode of OSC fabrication toward 20% PCE.

An Effective Strategy to Design a Large Bandgap Conjugated Polymer by Tuning the Molecular Backbone Curvature

With the significant progress of low bandgap non-fullerene acceptors, the development of wide bandgap (WBG) donors possessing ideal complementary absorption is of crucial importance to further enhance the photovoltaic performance of organic solar cells. An ideal strategy to design WBG donors is to down-shift the highest occupied molecular orbital (HOMO) and up-shift the lowest unoccupied molecular orbital (LUMO). A properly low-lying HOMO of the donor is favorable to obtaining a high open-circuit voltage, and a properly high-lying LUMO of the donor is conductive to efficient exciton dissociation. This work provides a new strategy to enlarge the bandgap of a polymer with simultaneously decreased HOMO and increased LUMO by increasing the polymer backbone curvature. The polymer PIDT-fDTBT with a large molecular backbone curvature shows a decreased HOMO of -5.38 eV and a prominently increased LUMO of -3.35 eV relative to the linear polymer PIDT-DTBT (E_HOMO = -5.30 eV, E_LUMO = -3.55 eV). The optical bandgap of PIDT-fDTBT is obviously broadened from 1.75 to 2.03 eV. This work demonstrates that increasing the polymer backbone curvature can effectively broaden the bandgap by simultaneously decreasing HOMO and increasing LUMO, which may guide the design of WBG conjugated materials.

Polaron Trapping and Migration in Iron-Doped Lithium Niobate

Photoinduced charge transport in lithium niobate for standard illumination, composition and temperature conditions occurs by means of small polaron hopping either on regular or defective lattice sites. Starting from Marcus-Holstein’s theory for polaron hopping frequency we draw a quantitative picture illustrating two underlying microscopic mechanisms besides experimental observations, namely direct trapping and migration-accelerated polaron trapping transport. Our observations will be referred to the typical outcomes of transient light induced absorption measurements, where the kinetics of a polaron population generated by a laser pulse then decaying towards deep trap sites is measured. Our results help to rationalize the observations beyond simple phenomenological models and may serve as a guide to design the material according to the desired specifications.

Giant Rylene Imide-Based Electron Acceptors for Organic Photovoltaics

ConspectusRylene imides are oligo(peri-naphthalene)s bearing one or two six-membered carboxylic imide rings. Their flexible reaction sites and unique photoelectronic properties have afforded active research for applications in photovoltaic devices, light-emitting diodes, and fluorescent sensors. Over the past few decades, synthetic flexibility along with the evolution of molecular design principles for novel aromatic imides has rendered these intriguing dyes considerably valuable, especially for organic photovoltaics (OPVs).During the course of molecular evolution, the most difficult criterion to meet is how to modulate the intra- and intermolecular interactions to alter the aggregation behavior of rylene imides as well as their compatibility with donor materials, with the prerequisite that the appropriate molecular energy level is maintained. In the meantime, our group has focused on the precise synthesis of π-extended rylene imide electron acceptors (RIAs) to rationally alter the molecular chemical and electronic structure, packing arrangement, and photoelectronic properties. These powerful molecular design strategies include the construction of a fully conjugated rigid multichromophoric architecture and successful integration of heteroatoms. Herein, these multichromophoric oligomers are precisely defined as giant rylene imides. Importantly, these strategies provide a vast space for progress in RIAs and present a more comprehensive structure-performance relationship network that can be distinguished from other electron acceptor systems. In particular, the successful acquisition of these fused superhelical architectures provides a meaningful reference for the pluralistic development of OPVs, such as triplet organic solar cells and polarized-light photovoltaic detectors. Meanwhile, the introduction of heteroatoms into the rylene conjugated skeleton provides donor/acceptor interfaces with enhanced electronic interactions and thereby suppresses the polaron-pair binding energy. Nonetheless, much remains to be implemented to broaden the absorption capability of rylene imides as well as to realize full utilization of these meaningful chiral isomers with a wide and strong UV-vis spectroscopic response.In this Account, we provide an overview of our novel approaches toward a supermolecular framework and of the reformed molecular design principle for rylene imide-based electron acceptors since 2012. We begin with a discussion of the rapidly emerging synthesis strategies for giant rylene imides. Then several typical examples with remarkable photovoltaic properties and unique working mechanisms are selected, aimed at providing an in-depth discussion of structure-property-performance relationships. The remaining challenges and newly emerging research information for giant rylene imide-based electron acceptors are further put forward. It is our aspiration that this Account will trigger intensive research interest in these pluralist rylene-based electron acceptors, thereby further accelerating the profound sustainable development of organic solar cells.

Single-layered organic photovoltaics with double cascading charge transport pathways: 18% efficiencies

The chemical structure of donors and acceptors limit the power conversion efficiencies achievable with active layers of binary donor-acceptor mixtures. Here, using quaternary blends, double cascading energy level alignment in bulk heterojunction organic photovoltaic active layers are realized, enabling efficient carrier splitting and transport. Numerous avenues to optimize light absorption, carrier transport, and charge-transfer state energy levels are opened by the chemical constitution of the components. Record-breaking PCEs of 18.07% are achieved where, by electronic structure and morphology optimization, simultaneous improvements of the open-circuit voltage, short-circuit current and fill factor occur. The donor and acceptor chemical structures afford control over electronic structure and charge-transfer state energy levels, enabling manipulation of hole-transfer rates, carrier transport, and non-radiative recombination losses.

Mechanically Interlocked Nitrogenated Nanographenes

Herein, we report the synthesis of mechanically interlocked nitrogenated nanographenes. These systems have been obtained by clipping different tetralactam macrocycles around a 1.9 nm dumbbell-shaped nitrogenated nanographene. Thermal, optoelectronic, and electrochemical characterization of the different mechanically interlocked nanographenes evidence enhanced thermal and photochemical stability, and also absorption and emission properties that vary with the structure of the macrocycle.

Stringing the Perylene Diimide Bow

This study explores a new mode of contortion in perylene diimides where the molecule is bent, like a bow, along its long axis. These bowed PDIs were synthesized through a facile fourfold Suzuki macrocyclization with aromatic linkers and a tetraborylated perylene diimide that introduces strain and results in a bowed structure. By altering the strings of the bow, the degree of bending can be controlled from flat to highly bent. Through spectroscopy and quantum chemical calculations, it is demonstrated that the energy of the lowest unoccupied orbital can be controlled by the degree of bending in the structures and that the energy of the highest occupied orbital can be controlled to a large extent by the constitution of the aromatic linkers. The important finding is that the bowing results not only in red-shifted absorptions but also more facile reductions.

Of Twists and Curves: Electronics, Photophysics, and Upcoming Applications of Non-Planar Conjugated Organic Molecules

Non-planar conjugated organic molecules (NPCOMs) contain π-conjugation across their length and also exhibit asymmetry in their conformation. In other words, certain molecular fragments in NPCOMs are either twisted or curved out of planarity. This conformational asymmetry in NPCOMs leads to non-uniform charge-distribution across the molecule, with important photophysical and electronic consequences such as altered thermodynamic stability, chemical reactivity, as well as materials properties. Majorly, NPCOMs can be classified as having either Fused or Rotatable architectures. NPCOMs have been the focus of significant scientific attention in the recent past due to their exciting photophysical behavior that includes intramolecular charge-transfer (ICT), thermally activated delayed fluorescence (TADF) and long-lived charge-separated states. In addition, they also have many useful materials characteristics such as biradical character, semi-conductivity, dynamic conformations, and mechanochromism. As a result, rational design of NPCOMs and mapping their structure-property correlations has become imperative. Researchers have executed conformational changes in NPCOMs through a variety of external stimuli such as pH, temperature, anions-cations, solvent, electric potential, and mechanical force in order to tailor their photophysical, optoelectronic and magnetic properties. Converging to these points, this review highlights the lucrative electronic features, photophysical traits and upcoming applications of NPCOMs by a selective survey of the recent scientific literature.