Self-assembled nanoparticle arrays for multiphase trace analyte detection

Interfacial Self-Assembly Nanostructures: Constructions and Applications

Interfacial self-assembly nanoarrays refer to the spontaneously organized nanostructures at interfaces, relying on the intrinsic properties of involved materials, such as surface energy, molecular structure, and interactions. In recent years, the exponential growth of self-assembly nanotechnology has substantially expanded the utility of nanomaterials. Particularly, non-covalent interactions-based interfacial self-assembly represents a viable and promising approach for the synthesis of novel nanostructure. This review introduces the significance and current development status of interfacial self-assembly technology, focusing on the driving mode, application, and prospects of interfacial self-assembly nanoarrays over the past few years.

Plasmonic Nanostructures Grown from Reacting Droplet-In-Microwell Array on Flexible Films for Quantitative Surface-Enhanced Raman Spectroscopy in Plant Wearable In Situ Detection

Plant wearable detection has garnered significant interest in advancing agricultural intelligence and promoting sustainable food production amidst the challenges of climate change. Accurately monitoring plant health and agrochemical residue levels necessitates qualities such as precision, affordability, simplicity, and noninvasiveness. Here, a novel attachable plasmonic film is introduced and designed for on-site detection of agrochemical residues utilizing surface-enhanced Raman spectroscopy (SERS). By functionalizing a thin polydimethylsiloxane film with silver nanoparticles via controlled droplet reactions in micro-well arrays, a plasmonic film is achieved that not only maintains optical transparency for precise analyte localization but also conforms closely to the plant surface, facilitating highly sensitive SERS measurements. The reliability of this film enables accurate identification and quantification of individual compounds and their mixtures, boasting an ultra-low detection limit ranging from 10-16 to 10-13 m, with mini mal relative standard deviation. To showcase its potential, on-field detection of pesticide residues on fruit surfaces is conducted using a handheld Raman spectrometer. This advancement in fabricating plasmonic nanostructures on flexible films holds promise for expanding SERS applications beyond plant monitoring, including personalized health monitoring, point-of-care diagnosis, wearable devices for human-machine interface, and on-site monitoring of environmental pollutants.

Engineering a Bifunctional Smart Nanoplatform Integrating Nanozyme Activity and Self-Assembly for Kidney Cancer Diagnosis and Classification

Accurate diagnosis and classification of kidney cancer are crucial for high-quality healthcare services. However, the current diagnostic platforms remain challenges in the rapid and accurate analysis of large-scale clinical biosamples. Herein, we fabricated a bifunctional smart nanoplatform based on tannic acid-modified gold nanoflowers (TA@AuNFs), integrating nanozyme catalysis for colorimetric sensing and self-assembled nanoarray-assisted LDI-MS analysis. The TA@AuNFs presented peroxidase (POD)- and glucose oxidase-like activity owing to the abundant galloyl residues on the surface of AuNFs. Combined with the colorimetric assay, the TA@AuNF-based sensing nanoplatform was used to directly detect glucose in serum for kidney tumor diagnosis. On the other hand, TA@AuNFs could self-assemble into closely packed and homogeneous two-dimensional (2D) nanoarrays at liquid-liquid interfaces by using Fe3+ as a mediator. The self-assembled TA@AuNFs (SA-TA@AuNFs) arrays were applied to assist the LDI-MS analysis of metabolites, exhibiting high ionization efficiency and excellent MS signal reproducibility. Based on the SA-TA@AuNF array-assisted LDI-MS platform, we successfully extracted metabolic fingerprints from urine samples, achieving early-stage diagnosis of kidney tumor, subtype classification, and discrimination of benign from malignant tumors. Taken together, our developed TA@AuNF-based bifunctional smart nanoplatform showed distinguished potential in clinical disease diagnosis, point-of-care testing, and biomarker discovery.

Liquid Interfacial Gating of Superhydrophobic Plasmonic Metal-Organic Frameworks for Three-in-One Separation, Enrichment, and Recognition in Bacterial Quorum Sensing

Poor adsorption properties of nonadsorbing targets and competing adsorption of nontargets at a liquid interface always hamper the development of interface sensing techniques. There is a need to fabricate materials that are applicable to various interface assemblies and, meanwhile, could be employed as interfacial gating to improve the performance of interface sensing by separating, enriching, and recognizing targets at the liquid interface. Here, superhydrophobic zeolite imidazole frameworks-8@gold nanoparticles-1H,1H,2H,2H-perfluorodecanethiol (ZIF-8@GNPs-PFDT) with a static water contact angle (WCA) of 155° was constructed via electrostatic self-assembly and surface graft modification. The plasmonic metal-organic framework (PMOF) nanohybrid realized all-purpose self-assembly at air/liquid and liquid/liquid interfaces and also facilely assembled on the surface of liquid droplets, hydrogels, and foams. The self-assembled porous materials displayed the capability for separating, enriching, and recognizing analytes at various oil/water interfaces and thus could be used to adsorb nonadsorbing targets and block the competing adsorption of nontargets. The self-assembled ZIF-8@GNPs-PFDT structures were employed as a three-in-one interfacial gating to endow the excellent surface-enhanced Raman scattering (SERS) sensing capability and has become a promising tool for dye molecular analysis, oil/water separation, organic phase identification, and in situ cultivation and monitoring of bacterial quorum sensing (QS).

All-in-One Electrokinetic Strategy Coupled with a Miniaturized Chip for SERS Detection of Multipesticides

Complexed and tiresome pretreatment processes have significantly impeded in-field analysis of environmental specimens. Herein, an all-in-one sample separation and enrichment strategy based on a compact charge-selective capture/nanoconfined enrichment (CSC/NCE) device is exploited for marker-free surface-enhanced Raman spectroscopy (SERS) detection of charged pesticides in matrix specimens. This tactic incorporating in situ separations, seizing, and nanoconfined enhancement can greatly elevate the effectiveness of sample pretreatment. Importantly, CSC/NCE with excellent adsorption performances and excellent plasmonic features facilitates concentration and signal amplification of electrically charged pesticides. With the introduction of an electric field on this integrated CSC/NCE, the matrix effect in samples could be significantly eradicated, and a distinct SERS response is witnessed for targeted analytes. Accurate quantification of multipesticides is achieved by synergizing the CSC/NCE chip and chemometrics, and the contents found by the CSC/NCE-based sensing strategy agree with those obtained from chromatography assays with relative deviations lower than 10%. The facile and versatile all-in-one tactic infused in a compact chip exhibits enormous potential for field-test application in chemical measurement and food safety.

Surface-Enhanced Raman Spectroscopy: Current Understanding, Challenges, and Opportunities

While surface-enhanced Raman spectroscopy (SERS) has experienced substantial advancements since its discovery in the 1970s, it is an opportunity to celebrate achievements, consider ongoing endeavors, and anticipate the future trajectory of SERS. In this perspective, we encapsulate the latest breakthroughs in comprehending the electromagnetic enhancement mechanisms of SERS, and revisit CT mechanisms of semiconductors. We then summarize the strategies to improve sensitivity, selectivity, and reliability. After addressing experimental advancements, we comprehensively survey the progress on spectrum-structure correlation of SERS showcasing their important role in promoting SERS development. Finally, we anticipate forthcoming directions and opportunities, especially in deepening our insights into chemical or biological processes and establishing a clear spectrum-structure correlation.

Acoustic Levitation Synthesis of Ultrahigh-Density Spherical Nucleic Acid Architectures for Specific SERS Analysis

Controllably regulating the electrostatic bilayer of nanogold colloids is a significant premise for synthesizing spherical nucleic acid (SNA) and building ordered plasmonic architectures. We develop a facile acoustic levitation reactor to universally synthesize SNAs with an ultra-high density of DNA strands, which is even higher than those of various state-of-the-art methods. Results reveal a new mechanism of DNA grafting via acoustic wave that can reconfigure the ligands on colloidal surfaces. The acoustic levitation reactor enables substrate-free three-dimentional (3D) spatial assembly of SNAs with controllable interparticle nanogaps through regulating DNA lengths. This kind of architecture may overcome the plasmonic enhancement limits by blocking electron tunneling and breaking electrostatic shielding in dried aggregations. Finite element simulations support the architecture with 3D spatial plasmonic hotspot matrix, and its ultrahigh surface-enhanced Raman scattering (SERS) capability is evidenced by in situ untargeted tracking of biomolecular events during photothermal stimulation (PTS)-induced cell death process. For biomarker diagnosis, the conjugation of adenosine triphosphate (ATP) aptamer onto SNAs enables in situ targeted tracking of ATP during PTS-induced cell death process. Particularly, the CD71 receptor and integrin α3β1 protein on PL45 cell membrance could be well distinguished by label-free SERS fingerprints when using specific XQ-2d and DML-7 aptamers, respectively, to synthesize SNA architectures. Our current acoustic levitation reactor offers a new method for synthesizing SNAs and enables both targeted and untargeted SERS analysis for tracking molecular events in living systems. It promises great potentials in biochemical synthesis and sensing in future.

Hybrid plasmonic aerogel with tunable hierarchical pores for size-selective multiplexed detection of VOCs with ultrahigh sensitivity

Sensitive and rapid identification of volatile organic compounds (VOCs) at ppm level with complex composition is vital in various fields ranging from respiratory diagnosis to environmental safety. Herein, we demonstrate a SERS gas sensor with size-selective and multiplexed identification capabilities for VOCs by executing the pre-enrichment strategy. In particular, the macro-mesoporous structure of graphene aerogel and micropores of metal-organic frameworks (MOFs) significantly improved the enrichment capacity (1.68 mmol/g for toluene) of various VOCs near the plasmonic hotspots. On the other hand, molecular MOFs-based filters with different pore sizes could be realized by adjusting the ligands to exclude undesired interfering molecules in various detection environments. Combining these merits, graphene/AuNPs@ZIF-8 aerogel gas sensor exhibited outstanding label-free sensitivity (up to 0.1 ppm toluene) and high stability (RSD=14.8%, after 45 days storage at room temperature for 10 cycles) and allowed simultaneous identification of multiple VOCs in a single SERS measurement with high accuracy (error < 7.2%). We visualize that this work will tackle the dilemma between sensitivity and detection efficiency of gas sensors and will inspire the design of next-generation SERS technology for selective and multiplexed detection of VOCs.

Concentration Enrichment in a Dissolving Microdroplet: Accessing Sub-nanomolar Electroanalysis

Droplet evaporation has previously been used as a concentration enrichment strategy; however, the measurement technique of choice requires quantification in rather large volumes. Electrochemistry has recently emerged as a method to robustly probe volumes even down to the attoliter (10-18 L) level. We present a concentration enrichment strategy based on the dissolution of a microdroplet placed on the surface of a Au ultramicroelectrode (radius ∼ 6.25 μm). By precisely positioning a 1,2-dichloroethane microdroplet onto the ultramicroelectrode with a microinjector, we are able to track the droplet's behavior optically and electrochemically. Because the droplet spontaneously dissolves over time, given the relative solubility of 1,2-dichloroethane in the water continuous phase, the change in volume with time enriches the concentration of the redox probe (Cp2*(Fe)II) in the droplet. We demonstrate robust electrochemical detection down to sub-nM (800 pM) concentrations of Cp2*(Fe)II. For this droplet, 800 pM constitutes only about 106 molecules. We extend the strategy in a single-blind study to determine unknown concentrations, emphasizing the promise of the new methodology. These results take voltammetric quantification easily to the sub-μM regime.

Spatially Uniform and Quantitative Surface-Enhanced Raman Scattering under Modal Ultrastrong Coupling Beyond Nanostructure Homogeneity Limits

We developed a substrate that enables highly sensitive and spatially uniform surface-enhanced Raman scattering (SERS). This substrate comprises densely packed gold nanoparticles (d-AuNPs)/titanium dioxide/Au film (d-ATA). The d-ATA substrate demonstrates modal ultrastrong coupling between localized surface plasmon resonances (LSPRs) of AuNPs and Fabry-Pérot nanocavities. d-ATA exhibits a significant enhancement of the near-field intensity, resulting in a 78-fold increase in the SERS signal for crystal violet (CV) compared to that of d-AuNP/TiO2 substrates. Importantly, high sensitivity and a spatially uniform signal intensity can be obtained without precise control of the shape and arrangement of the nanoscale AuNPs, enabling quantitative SERS measurements. Additionally, SERS measurements of rhodamine 6G (R6G) on this substrate under ultralow adsorption conditions (0.6 R6G molecules/AuNP) show a spatial variation in the signal intensity within 3%. These findings suggest that the SERS signal under modal ultrastrong coupling originates from multiple plasmonic particles with quantum coherence.

Surface enhanced Raman spectroscopy sensor based on silver nanoparticles/multi wall carbon nanotubes for ultrasensitive detection of cholesterol

Cholesterol is vital for living things because of an important part of cell membranes, as well as one of the basic components of brain and nerve cells. However, cholesterol must be at an optimum level. If it is below or above this level, it is a marker of many various diseases. Therefore, the detection of cholesterol amount is very important. Herein, MWCNTs were synthesized and AgNPs were grown on their surfaces. Thus, AgNP/MWCNT hybrid material was obtained. The AgNP/MWCNTs were used as surface enhancement Raman scattering (SERS) substrate to quantify the cholesterol molecule. High SERS enhancement of AgNP/MWCNT, specific SERS sensing platform and high sensitive SERS substrate were proposed to determine and monitor cholesterol molecule. AgNP/MWCNT substrate was studied in the concentration range of 10-3-10-10 M and the limit of detection (LOD) was calculated as 3.24 × 10-11 M. In addition, the enhancement factor (EF) was determined as 6.21 × 109. As a result, it was reported in this study that cholesterol molecule can be determined with excellent accuracy, precision and sensitive by using AgNP/MWCNT substrate and therefore it can provide great potential in clinical diagnosis and health management.

In-situ SERS detection of quinolone antibiotic residues in aquaculture water by multifunctional Fe3O4@mTiO2@Ag nanoparticles

Antibiotic residues in aquaculture environments disrupt the ecosystem balance and pose a potential hazard to human health when entering the food chain. Therefore, ultra-sensitive detection of antibiotics is necessary. In this study, a multifunctional Fe3O4@mTiO2@Ag core-shell nanoparticle (NP), synthesized using a layer-by-layer method, was demonstrated to be useful as an enhanced substrate for in-situ surface-enhanced Raman spectroscopy (SERS) detection of various quinolone antibiotics in aqueous environments. The results showed that the minimum detectable concentrations of the six investigated antibiotics were 1 × 10-9 mol/L (ciprofloxacin, danofloxacin, enoxacin, enrofloxacin, and norfloxacin) and 1 × 10-8 mol/L (difloxacin hydrochloride) under the enrichment and enhancement of Fe3O4@mTiO2@Ag NPs. Additionally, there was a good quantitative relationship between the antibiotics concentrations and SERS peak intensities within a certain detection range. The results of the spiked assay of actual aquaculture water samples showed that the recoveries of the six antibiotics ranged from 82.9% to 113.5%, with relative standard deviations ranging from 1.71% to 7.24%. In addition, Fe3O4@mTiO2@Ag NPs achieved satisfactory results in assisting the photocatalytic degradation of antibiotics in aqueous environments. This provides a multifunctional solution for low concentration detection and efficient degradation of antibiotics in aquaculture water.

Combining surface-accessible Ag and Au colloidal nanomaterials with SERS for in situ analysis of molecule-metal interactions in complex solution environments

The interactions between molecules and noble metal nanosurfaces play a central role in many areas of nanotechnology. The surface chemistry of noble metal surfaces under ideal, clean conditions has been extensively studied; however, clean conditions are seldom met in real-world applications. We developed a sensitive and robust characterization technique for probing the surface chemistry of nanomaterials in the complex environments that are directly relevant to their applications. Surface-enhanced Raman spectroscopy (SERS) can be used to probe the interaction of plasmonic nanoparticles with light to enhance the Raman signals of molecules near the surface of nanoparticles. Here, we explain how to couple SERS with surface-accessible plasmonic-enhancing substrates, which are capped with weakly adsorbing capping ligands such as citrate and chloride ions, to allow molecule-metal interactions to be probed in situ and in real time, thus providing information on the surface orientation and the formation and breaking of chemical bonds. The procedure covers the synthesis and characterization of surface-accessible colloids, the preliminary SERS screening with agglomerated colloids, the synthesis and characterization of interfacial nanoparticle assemblies, termed metal liquid-like films, and the in situ biphasic SERS analysis with metal liquid-like films. The applications of the approach are illustrated using two examples: the probing of π-metal interactions and that of target/ligand-particle interactions on hollow bimetallic nanostars. This protocol, from the initial synthesis of the surface-accessible plasmonic nanoparticles to the final in situ biphasic SERS analysis, requires ~14 h and is ideally suited to users with basic knowledge in performing Raman spectroscopy and wet synthesis of metal nanoparticles.

Dense Arrays of Nanohelices: Raman Scattering from Achiral Molecules Reveals the Near-Field Enhancements at Chiral Metasurfaces

Against the background of the current healthcare and climate emergencies, surface enhanced Raman scattering (SERS) is becoming a highly topical technique for identifying and fingerprinting molecules, e.g., within viruses, bacteria, drugs, and atmospheric aerosols. Crucial for SERS is the need for substrates with strong and reproducible enhancements of the Raman signal over large areas and with a low fabrication cost. Here, dense arrays of plasmonic nanohelices (≈100 nm in length), which are of interest for many advanced nanophotonics applications, are investigated, and they are shown to present excellent SERS properties. As an illustration, two new ways to probe near-field enhancement generated with circular polarization at chiral metasurfaces are presented, first using the Raman spectra of achiral molecules (crystal violet) and second using a single, element-specific, achiral molecular vibrational mode (i.e., a single Raman peak). The nanohelices can be fabricated over large areas at a low cost and they provide strong, robust and uniform Raman enhancement. It is anticipated that these advanced materials will find broad applications in surface enhanced Raman spectroscopies and material science.

A robust SERS calibration using a pseudo-internal intensity reference

Surface-enhanced Raman scattering (SERS) with high molecular sensitivity and specificity is a powerful nondestructive analytical tool. Since its discovery, SERS measurements have suffered from the vulnerability of calibration curve, which makes quantification analysis a great challenge. In this work, we report a robust calibration method by introducing a referenced measurement as the intensity standard. This intensity reference not only has the advantages of the internal standard method such as reflecting the SERS substrate enhancement, but also avoids the introduction of competing adsorption between target molecules and the internal standard. Based on the normalized calibration curve, the magnitude of the R6G concentration can be well evaluated from 10^-7 M to 10^-12 M. Furthermore, we demonstrate that this pseudo-internal standard method can also work well using a different type of molecule as the reference. This SERS calibration method would be beneficial for the development of quantitative SERS analysis.

Fabrication of flexible AuNPs@ polyimide heating chips for in situ explosives SERS sensing in nature samples

In this study, highly sensitive flexible AuNPs@ polyimide SERS heating chips (APHC) were fabricated for in situ collecting and detecting TNT. Large-scale AuNPs arrays were synthesized by liquid-liquid interface self-assembly and transferred to polyimide heating film as SERS substrates. 4-ATP and AgNPs functionalized on APHC were used as capture means and signal amplifiers, combining with TNT to form the AuNPs-TNT-AgNPs "sandwich" structure. This flexible APHC chip showed high sensitivity as enhancement factor was 5.5×10⁵, and good repeatability and stability (RSD<10%). It was applied to detect TNT solutions with a low concentration of 10^-9 M, and showed a good linear response in the range from 10^-5 to 10^-9 M (R² = 0.986). In addition, the detection method also had good selectivity and no response to various TNT analogs. More important, combing with the thermal enrichment strategy, TNT dispersed in environmental samples such as soil, fruit and clothing would be enriched as vapor then collected and detected by APHC. This APHC device shows great potential for in situ sensing platforms, due to its sensitivity, high efficiency, and excellent portability.

Interfacial Colloidal Self-Assembly for Functional Materials

ConspectusSelf-assembly bridges nanoscale and microscale colloidal particles into macroscale functional materials. In particular, self-assembly processes occurring at the liquid/liquid or solid/liquid/air interfaces hold great promise in constructing large-scale two- or three-dimensional (2D or 3D) architectures. Interaction of colloidal particles in the assemblies leads to emergent collective properties not found in individual building blocks, offering a much larger parameter space to tune the material properties. Interfacial self-assembly methods are rapid, cost-effective, scalable, and compatible with existing fabrication technologies, thus promoting widespread interest in a broad range of research fields.Surface chemistry of nanoparticles plays a predominant role in driving the self-assembly of nanoparticles at water/oil interfaces. Amphiphilic nanoparticles coated with mixed polymer brushes or mussel-inspired polydopamine were demonstrated to self-assemble into closely packed thin films, enabling diverse applications from electrochemical sensors and catalysis to surface-enhanced optical properties. Interfacial assemblies of amphiphilic gold nanoparticles were integrated with graphene paper to obtain flexible electrodes in a modular approach. The robust, biocompatible electrodes with exceptional electrocatalytic activities showed excellent sensitivity and reproducibility in biosensing. Recyclable catalysts were prepared by transferring monolayer assemblies of polydopamine-coated nanocatalysts to both hydrophilic and hydrophobic substrates. The immobilized catalysts were easily recovered and recycled without loss of catalytic activity. Plasmonic nanoparticles were self-assembled into a plasmonic substrate for surface-enhanced Raman scattering, metal-enhanced fluorescence, and modulated fluorescence resonance energy transfer (FRET). Strong Raman enhancement was accomplished by rationally directing the Raman probes to the electromagnetic hotspots. Optimal enhancement of fluorescence and FRET was realized by precisely controlling the spacing between the metal surface and the fluorophores and tuning the surface plasmon resonance wavelength of the self-assembled substrate to match the optical properties of the fluorescent dye.At liquid/solid interfaces, infiltration-assisted (IFAST) colloidal self-assembly introduces liquid infiltration in the substrate as a new factor to control the degree of order of the colloidal assemblies. The strong infiltration flow leads to the formation of amorphous colloidal arrays that display noniridescent structural colors. This method is compatible with a broad range of colloidal particle inks, and any solid substrate that is permeable to dispersing liquids but particle-excluding is suitable for IFAST colloidal assembly. Therefore, the IFAST technology offers rapid, scalable fabrication of structural color patterns of diverse colloidal particles with full-spectrum coverage and unprecedented flexibility. Metal-organic framework particles with either spherical or polyhedral morphology were used as ink particles in the Mayer rod coating on wettability patterned photopapers, leading to amorphous photonic structures with vapor-responsive colors. Anticounterfeiting labels have also been developed based on the complex optical features encoded in the photonic structures.Interfacial colloidal self-assembly at the water/oil interface and IFAST assembly at the solid/liquid/air interface have proven to be versatile fabrication platforms to produce functional materials with well-defined properties for diverse applications. These platform technologies are promising in the manufacturing of value-added functional materials.

General approach to surface-accessible plasmonic Pickering emulsions for SERS sensing and interfacial catalysis

Pickering emulsions represent an important class of functional materials with potential applications in sustainability and healthcare. Currently, the synthesis of Pickering emulsions relies heavily on the use of strongly adsorbing molecular modifiers to tune the surface chemistry of the nanoparticle constituents. This approach is inconvenient and potentially a dead-end for many applications since the adsorbed modifiers prevent interactions between the functional nanosurface and its surroundings. Here, we demonstrate a general modifier-free approach to construct Pickering emulsions by using a combination of stabilizer particles, which stabilize the emulsion droplet, and a second population of unmodified functional particles that sit alongside the stabilizers at the interface. Freeing Pickering emulsions from chemical modifiers unlocks their potential across a range of applications including plasmonic sensing and interfacial catalysis that have previously been challenging to achieve. More broadly, this strategy provides an approach to the development of surface-accessible nanomaterials with enhanced and/or additional properties from a wide range of nano-building blocks including organic nanocrystals, carbonaceous materials, metals and oxides.

Plasmonic/magnetic nanoarchitectures: From controllable design to biosensing and bioelectronic interfaces

Controllable design of the nanocrystal-assembled plasmonic/magnetic nanoarchitectures (P/MNAs) inspires abundant methodologies to enhance light-matter interactions and control magnetic-induced effects by means of fine-tuning the morphology and ordered packing of noble metallic or magnetic building blocks. The burgeoning development of multifunctional nanoarchitectures has opened up broad range of interdisciplinary applications including biosensing, in vitro diagnostic devices, point-of-care (POC) platforms, and soft bioelectronics. By taking advantage of their customizability and efficient conjugation with capping biomolecules, various nanoarchitectures have been integrated into high-performance biosensors with remarkable sensitivity and versatility, enabling key features that combined multiplexed detection, ease-of-use and miniaturization. In this review, we provide an overview of the representative developments of nanoarchitectures that being built by plasmonic and magnetic nanoparticles over recent decades. The design principles and key mechanisms for signal amplification and quantitative sensitivity have been explored. We highlight the structure-function programmability and prospects of addressing the main limitations for conventional biosensing strategies in terms of accurate selectivity, sensitivity, throughput, and optoelectronic integration. State-of-the-art strategies to achieve affordable and field-deployable POC devices for early multiplexed detection of infectious diseases such as COVID-19 has been covered in this review. Finally, we discuss the urgent yet challenging issues in nanoarchitectures design and related biosensing application, such as large-scale fabrication and integration with portable devices, and provide perspectives and suggestions on developing smart biosensors that connecting the materials science and biomedical engineering for personal health monitoring.

Lossless enrichment of trace analytes in levitating droplets for multiphase and multiplex detection

Concentrating a trace amount of molecules from liquids, solid objects, or the gas phase and delivering them to a localized area are crucial for almost any trace analyte detection device. Analytes within a liquid droplet resting on micro/nanostructured surfaces with liquid-repellent coatings can be concentrated during solvent evaporation. However, these coatings suffer from complex manufacturing procedures, poor versatility, and limited analyte enrichment efficiency. Here, we report on the use of an acoustic levitation platform to losslessly concentrate the analyte molecules dissolved in any volatile liquid, attached to solid objects, or spread in air. Gold nanoparticles can be simultaneously concentrated with the analytes in different phases, realizing sensitive, surface-enhanced Raman scattering detection even at attomolar (10^-18 mol/L) concentration levels. The acoustic levitation platform-enabled, lossless analyte enrichment can significantly increase the analytical performance of many conventional microsensing techniques.

Advances in metal graphitic nanocapsules for biomedicine

Metal graphitic nanocapsules have the advantages of both graphitic and metal nanomaterials, showing great promise in biomedicine. On one hand, the chemically inert graphitic shells are able to protect the metal core from external environments, quench the fluorescence signal from the biological system, offer robust platform for targeted molecules or drugs loading, and act as stable Raman labels or internal standard molecule. On the other hand, the metal cores with different compositions, sizes, and morphologies show unique physicochemical properties, and further broaden their biomedical functions. In this review, we firstly introduce the preparation, classification, and properties of metal graphitic nanocapsules, then summarize the recent progress of their applications in biodetection, bioimaging, and therapy. Challenges and their development prospects in biomedicine are eventually discussed in detail. We expect the versatile metal graphitic nanocapsules will advance the development of future clinical biomedicine.

Fabrication of triangular Au/Ag nanoparticle arrays with sub-10 nm nanogap controlled by flexible substrate for surface-enhanced Raman scattering

Large-area ordered nanoparticle arrays have shown great potential as surface-enhanced Raman scattering (SERS) substrates. The preparation methods of metal nanogap with width greater than 10 nm are relatively mature. In contrast, nanomanufacturing methods for sub-10 nm still face challenges in realizing controllable and reproducible features. Herein, a series of triangular Au/Ag nanoparticle arrays (noted as Au/Ag NPAs) with sub-10 nm gap were prepared by utilizing stress-induced local cracking and high expansion coefficient of flexible polydimethylsiloxane (PDMS). The triangular tip-connected Au/Ag NPAs were firstly prepared by depositing Au and Ag films on home-made polystyrene (PS) templates, then gaps with precise size (3 nm, 5 nm, 7 nm, 9 nm and 11 nm) were achieved by controlling the temperature of flexible PDMS, and finally transferred to the silicon wafers using as SERS substrates. The results showed that when the prepared triangular Au/Ag NPAs with 3 nm nanogap were used as reliable SERS substrates, the relative standard deviation of Raman intensity at 621 cm^-1mode of Rhodamine 6G (R6G) with concentration of 10^-6M was 2.3%, indicating excellent uniformity. The approach showed good controllability and repeatability for SERS analysis, exhibiting good application prospect in surface trace detection.

Molecular Plasmonics with Metamaterials

Molecular plasmonics, the area which deals with the interactions between surface plasmons and molecules, has received enormous interest in fundamental research and found numerous technological applications. Plasmonic metamaterials, which offer rich opportunities to control the light intensity, field polarization, and local density of electromagnetic states on subwavelength scales, provide a versatile platform to enhance and tune light-molecule interactions. A variety of applications, including spontaneous emission enhancement, optical modulation, optical sensing, and photoactuated nanochemistry, have been reported by exploiting molecular interactions with plasmonic metamaterials. In this paper, we provide a comprehensive overview of the developments of molecular plasmonics with metamaterials. After a brief introduction to the optical properties of plasmonic metamaterials and relevant fabrication approaches, we discuss light-molecule interactions in plasmonic metamaterials in both weak and strong coupling regimes. We then highlight the exploitation of molecules in metamaterials for applications ranging from emission control and optical modulation to optical sensing. The role of hot carriers generated in metamaterials for nanochemistry is also discussed. Perspectives on the future development of molecular plasmonics with metamaterials conclude the review. The use of molecules in combination with designer metamaterials provides a rich playground both to actively control metamaterials using molecular interactions and, in turn, to use metamaterials to control molecular processes.

Combining Azimuthal and Polar Angle Resolved Shadow Mask Deposition and Nanosphere Lithography to Uncover Unique Nano-Crystals

In this article, we present a systematic investigation on a multistep nanosphere lithography technique to uncover its potential in fabricating a wide range of two- and three-dimensional nanostructures. A tilted (polar angle) electron beam shower on a nanosphere mask results in an angled shadow mask deposition. The shape of the shadow also depends on the azimuthal angle of the mask sitting on top of the substrate. We performed angled shadow mask depositions with systematic variation of these two angular parameters, giving rise to complex nanostructures (down to 50 nm), repeated over a large area without defect. In this article, nanosphere lithography with two- and four-fold azimuthal symmetry was studied at constant tilt angles followed by variations in tilt without azimuthal rotation of the substrate. Finally, both angular parameters were simultaneously varied. The structure of shadow crystals was explained using Matlab simulation. This work stretches the horizons of nanosphere lithography, opening up new scopes in plasmonic and magnonic research.

Designing Multicomponent Polymer Colloids for Self-Stratifying Films

Aqueous polymer colloids known as latexes are widely used in coating applications. Multicomponent latexes comprised of two incompatible polymeric species organized into a core-shell particle morphology are a promising system for self-stratifying coatings that spontaneously partition into multiple layers, thereby yielding complex structured coatings requiring only a single application step. Developing new materials for self-stratifying coatings requires a clear understanding of the thermodynamic and kinetic properties governing phase separation and polymeric species transport. In this work, we study phase separation and self-stratification in polymer films based on multicomponent acrylic (shell) and acrylic-silicone (core) latex particles. Our results show that the molecular weight of the shell polymer and heat aging conditions of the film critically determine the underlying transport phenomena, which ultimately controls phase separation in the film. Unentangled shell polymers result in efficient phase separation within hours with heat aging at reasonable temperatures, whereas entangled shell polymers effectively inhibit phase separation even under extensive heat aging conditions over a period of months due to kinetic limitations. Transmission electron microscopy is used to track morphological changes as a function of thermal aging. Interestingly, our results show that the rheological properties of the latex films are highly sensitive to morphology, and linear shear rheology is used to understand morphological changes. Overall, these results highlight the importance of bulk rheology as a simple and effective tool for understanding changes in morphology in multicomponent latex films.

Dimensional Design for Surface-Enhanced Raman Spectroscopy

Surface-enhanced Raman spectroscopy (SERS) is a vibrational spectroscopy technique that enables specific identification of target analytes with sensitivity down to the single-molecule level by harnessing metal nanoparticles and nanostructures. Excitation of localized surface plasmon resonance of a nanostructured surface and the associated huge local electric field enhancement lie at the heart of SERS, and things will become better if strong chemical enhancement is also available simultaneously. Thus, the precise control of surface characteristics of enhancing substrates plays a key role in broadening the scope of SERS for scientific purposes and developing SERS into a routine analytical tool. In this review, the development of SERS substrates is outlined with some milestones in the nearly half-century history of SERS. In particular, these substrates are classified into zero-dimensional, one-dimensional, two-dimensional, and three-dimensional substrates according to their geometric dimension. We show that, in each category of SERS substrates, design upon the geometric and composite configuration can be made to achieve an optimized enhancement factor for the Raman signal. We also show that the temporal dimension can be incorporated into SERS by applying femtosecond pulse laser technology, so that the SERS technique can be used not only to identify the chemical structure of molecules but also to uncover the ultrafast dynamics of molecular structural changes. By adopting SERS substrates with the power of four-dimensional spatiotemporal control and design, the ultimate goal of probing the single-molecule chemical structural changes in the femtosecond time scale, watching the chemical reactions in four dimensions, and visualizing the elementary reaction steps in chemistry might be realized in the near future.

Phosphonium-Based Ionic Liquid Significantly Enhances SERS of Cytochrome c on TiO2 Nanotube Arrays

Surface-enhanced Raman scattering (SERS) is an attractive technique for studying trace detection. It is of utmost importance to further improve the performance and understand the underlying mechanisms. An ionic liquid (IL), the anion of which is derived from biomass, [P6,6,6,14][FuA] was synthesized and used as a trace additive to improve the SERS performance of cytochrome c (Cyt c) on TiO2 nanotube arrays (TNAs). An increased and better enhancement factor (EF) by four to five times as compared to the system without an IL was obtained, which is better than that from using the choline-based amino acid IL previously reported by us. Dissociation of the ILs improved the ionic conductivity of the system, and the long hydrophobic tails of the [P6,6,6,14]+ cation contributed to a strong electrostatic interaction between Cyt c and the TNA surface, thereby enhancing the SERS performance. Atomic force microscopy did verify strong electrostatic interactions between the Cyt c molecules and TNAs after the addition of the IL. This work demonstrates the importance of introducing the phosphonium-based IL to enhance the SERS performance, which will stimulate further development of more effective ILs on SERS detection and other relevant applications in biology.

Multi-analyte High-Throughput Microplate-SERS Reader with Controllable Liquid Interfacial Arrays

High-throughput surface-enhanced Raman scattering (SERS) reader, especially for liquid sample testing, is of great significance and huge demand in biology, environment, and other analytical fields. Inspired by the principle of microplate reader, herein, we developed a microplate-SERS reader for semiautomatic and high-throughput assays by virtue of three-dimensional liquid interfacial arrays (LIAs). For the first time, the formation of LIA in oil-in-water state, water-in-oil state, and two-dimensional plane state is realized by operating the hydrophilicity (contact angle) of the container. Through the force analysis of LIA, the effect of organic (O) phase density on the relative position of LIA was quantified. In addition, the optimized reader offers fast and continuous semiautomatic detection of 12 samples below 10 min with great signal reproducibility (calibration with the characteristic peak of O phase as the internal standard). The isolated wells in the microplate prevent analyte cross talk, allowing accurate quantification of each sample. Multiplex analysis capability highlights that this reader has the ability of rapid identification and quantification of samples containing various analytes and concentrations. The results demonstrate high-resolution dual and triple analyte detection with fully preserved signal and Raman features of individual analytes in a mixture, which implies that it also has excellent anticounterfeiting applications. This microplate-SERS reader combines the superior advantages of the LIA, microplate, and SERS techniques to retrieve the molecular vibrational fingerprints of various chemicals in complex media.

A Liquid Interfacial SERS Platform on a Nanoparticle Array Stabilized by Rigid Probes for the Quantification of Norepinephrine in Rat Brain Microdialysates

For the reliable determination of trace chemicals in the brain, we created a SERS platform based on a functionalized AuNPs array formed at a liquid/liquid interface in a uniform fashion over a large substrate area through ternary regulations for real-time quantification of trace norepinephrine (NE). The rigid molecule, 4-(thiophen-3-ylethynyl)-benzaldehyde (RP1) was designed and co-assembled at AuNPs with 4-mercaptophenylboronic acid (MPBA) to chemically define NE via dual recognition. Meanwhile, the rigid structure assembly of RP1 and MPBA efficiently fixed the interparticle gap, guaranteeing reproducible SERS analysis. Furthermore, the Raman peak of C≡C group in the silent region was taken as a response element to further improve the accuracy. Combined with microdialysis, this SERS platform was developed for in-the-field testing of NE in rat brain microdialysates following anxiety.

Modular super-assembly of hierarchical superstructures from monomicelle building blocks

Manipulating the super-assembly of polymeric building blocks still remains a great challenge due to their thermodynamic instability. Here, we report on a type of three-dimensional hierarchical core-satellite SiO₂@monomicelle spherical superstructures via a previously unexplored monomicelle interfacial super-assembly route. Notably, in this superstructure, an ultrathin single layer of monomicelle subunits (~18 nm) appears in a typically hexagon-like regular discontinuous distribution (adjacent micelle distance of ~30 nm) on solid spherical interfaces (SiO₂), which is difficult to achieve by conventional super-assembled methods. Besides, the number of the monomicelles on colloidal SiO₂ interfaces can be quantitatively controlled (from 76 to 180). This quantitative control can be precisely manipulated by tuning the interparticle electrostatic interactions (the intermicellar electrostatic repulsion and electrostatic attractions between the monomicelle units and the SiO₂ substrate). This monomicelle interfacial super-assembly strategy will enable a controllable way for building multiscale hierarchical regular micro- and/or macroscale materials and devices.

Complementary Powerful Techniques for Investigating the Interactions of Proteins with Porous TiO2 and Its Hybrid Materials: A Tutorial Review

Understanding the adsorption and interaction between porous materials and protein is of great importance in biomedical and interface sciences. Among the studied porous materials, TiO₂ and its hybrid materials, featuring distinct, well-defined pore sizes, structural stability and excellent biocompatibility, are widely used. In this review, the use of four powerful, synergetic and complementary techniques to study protein-TiO_2-based porous materials interactions at different scales is summarized, including high-performance liquid chromatography (HPLC), atomic force microscopy (AFM), surface-enhanced Raman scattering (SERS), and Molecular Dynamics (MD) simulations. We expect that this review could be helpful in optimizing the commonly used techniques to characterize the interfacial behavior of protein on porous TiO₂ materials in different applications.

Tannic acid: a crosslinker leading to versatile functional polymeric networks: a review

With the thriving of mussel-inspired polyphenol chemistry as well as the demand for low-cost analogues to polydopamine in adhesive design, tannic acid has gradually become a research focus because of its wide availability, health benefits and special chemical properties. As a natural building block, tannic acid could be used as a crosslinker either supramolecularly or chemically, ensuring versatile functional polymeric networks for various applications. Up to now, a systematic summary on tannic-acid-based networks has still been waiting for an update and outlook. In this review, the common features of tannic acid are summarized in detail, followed by the introduction of covalent and non-covalent crosslinking methods leading to various tannic-acid-based materials. Moreover, recent progress in the application of tannic acid composites is also summarized, including bone regeneration, skin adhesives, wound dressings, drug loading and photothermal conversion. Above all, we also provide further prospects concerning tannic-acid-crosslinked materials.

Controlling the Shrinkage of 3D Hot Spot Droplets as a Microreactor for Quantitative SERS Detection of Anticancer Drugs in Serum Using a Handheld Raman Spectrometer

Quantitative measurement is one of the ultimate targets for surface-enhanced Raman spectroscopy (SERS), but it suffers from difficulties in controlling the uniformity of hot spots and placing the target molecules in the hot spot space. Here, a convenient approach of three-phase equilibrium controlling the shrinkage of three-dimensional (3D) hot spot droplets has been demonstrated for the quantitative detection of the anticancer drug 5-fluorouracil (5-FU) in serum using a handheld Raman spectrometer. Droplet shrinkage, triggered by the shaking of aqueous nanoparticle (NP) colloids with immiscible oil chloroform (CHCl₃) after the addition of negative ions and acetone, not only brings the nanoparticles in close proximity but can also act as a microreactor to enhance the spatial enrichment capability of the analyte in plasmonic sites and thereby realize simultaneously controlling 3D hot spots and placing target molecules in hot spots. Moreover, the shrinking process of Ag colloid droplets has been investigated using a high-speed camera, an in situ transmission electron microscope (in situ TEM), and a dark-field microscope (DFM), demonstrating the high stability and uniformity of nanoparticles in droplets. The shrunk Ag NP droplets exhibit excellent SERS sensitivity and reproducibility for the quantitative analysis of 5-FU over a large range of 50-1000 ppb. Hence, it is promising for quantitative analysis of complex systems and long-term monitoring of bioreactions.

Plasmonic Superlattice Membranes Based on Bimetallic Nano-Sea Urchins as High-Performance Label-Free Surface-Enhanced Raman Spectroscopy Platforms

On the basis of an abundance of elemental plasmonic nanocrystals identifiable by their unique morphology and intrinsic optoelectronic properties, it is necessary to rationally tailor the structural parameters to optimize the functionalities of nanoassemblies for application as plasmonic circuits/devices. Among them, the plasmonic superlattice membrane has emerged as a novel optically active metamaterial, which is constructed by nanocrystals at a two-dimensional (2D) plane with a highly ordered structure and strong plasmonic coupling interactions. Here, we report on the fabrication of a novel plasmonic superlattice membrane using bimetallic core-shell nano-sea urchins (Nano-SEUs) as meta-atoms. Under the guidance of soft-ligand balancing in conjugation with drying-mediated self-assembly at the air/water interface, well-defined giant 2D superlattices with total lateral dimensions of up to 5 mm wide and 80 nm thick have been synthesized, corresponding to an aspect ratio of 62 500. Programmable morphology control over the Nano-SEUs has been achieved in high yield by rationally tuning the spiky branches as well as the thickness of the silver shell, allowing systematic variation of the plasmonic properties of the membrane. Such superlattice membranes exhibited a strong and reproducible surface-enhanced Raman spectroscopy (SERS) signal that originates from interparticle coupling and electric (E)-field enhancement, enabling an enhancement factor of up to 10⁶. We also demonstrated that the fabricated membrane allows the label-free SERS detection of dopamine from 0.1 nM to 1 μM. Thus, this giant Nano-SEU assembled superlattice membrane can be used as a SERS substrate for on-spot biomarker detection, which paves a robust and inexpensive avenue for highly sensitive and reliable biomedical sensing and diagnostics.

Self-assembled plasmonic nanoarrays for enhanced bacterial identification and discrimination

The rapid and accurate bacterial testing is a critical step for the management of infectious diseases, but challenges remain largely due to a lack of advanced sensing tools. Here we report the development of highly plasmon-active, biofunctional nanoparticle arrays for simultaneous capture, identification, and differentiation of bacteria by surface-enhanced Raman scattering (SERS). The nanoarrays were facilely prepared through an electrostatic mechanism-controlled self-assembly of metallic nanoparticles at liquid-liquid interfaces, and exhibited high SERS sensitivity beyond femtomole, good reproducibility (relative standard deviation of 2.7%) and stability. Modification of the nanoarrays with concanavalin A allowed to effective capture of both Gram-positive and Gram-negative bacteria (bacterial-capture efficiency maintained beyond 50%) at bacterial concentrations ranging from 50 to 2000 CFU mL^-1, as determined by the plate-counting method. Moreover, single-cell Raman fingerprinting and discrimination of eight different bacteria species with high signal-to-noise ratio, excellent spectral reproducibility, and a total assay time of 1.5 h was achieved under fairly mild conditions (24 μW, acquisition time: 1 s). Collectively, we believe that our biofunctionalized, SERS-based self-assembled nanoarrays have great potential to help in rapid and label-free bacterial diagnosis and phenotyping study.

Reliable SERS detection of pesticides with a large-scale self-assembled Au@4-MBA@Ag nanoparticle array

The fabrication of sensitive and reliable interfacial plasmonic platform for measuring chemical contaminants in various phases is an exciting topic in the food industry and for environment monitoring. In this study, a high-performance surface-enhanced Raman spectroscopy (SERS) analytic platform was developed through self-assembly of the gold@4-mercaptobenzoic acid@silver nanoparticles (Au@4-MBA@Ag NPs) at the cyclohexane/water interface. By addition of the inducer ethanol, the Au@4-MBA@Ag NPs in aqueous phase was effectively migrated to the biphasic interface, forming a large-scale close-packed nanoparticle array. The average gap between adjacent nanoparticles was smaller than 3 nm, where intensive SERS "hot spots" were created for high-sensitive detection. Furthermore, using the sandwiched 4-MBA molecule as the internal standard to correct the Raman signal fluctuations, the point-to-point and batch-to-batch reproducibility of Au@4-MBA@Ag array were improved with lower relative standard deviation (RSD) values of 8.84% and 14.97%, respectively, and pesticides (thiram and thiabendazole) analysis in both aqueous and organic phases were achieved with higher accuracy (R² of 0.986 and 0.990) as compared with those without 4-MBA correction (R² of 0.867 and 0.974). The high-throughput fabrication of the self-assembled nanoparticle array is a promising approach for development of a sensitive and reliable SERS platform for chemical contaminants monitoring in multiphase.

Stable SERS substrate based on highly reflective metal liquid-like films wrapped hydrogels for direct determination of small molecules in a high protein matrix

The study of the interaction between small molecules and proteins is important. Surface-enhanced Raman spectroscopy (SERS) is suitable for such applications since it has the power of detecting a molecule based on its intrinsic nature and without labeling. Herein, the MeLLFs@PAAG SERS substrate supporting highly reflective metal liquid-like films (MeLLFs) with polyacrylamide hydrogels (PAAG) has high-density "hot spots" to provide excellent SERS activity. The MeLLFs@PAAG formed by AgNPs only has less than 15% SERS activity loss when stored in the air for more than three weeks. By using rhodamine 6G (R6G) as a model analyte, the AgNPs based MeLLFs@PAAG SERS substrate exhibits an enhancement factor (EF) as high as 8.0 × 10⁶, a limit of detection (LOD) of 76.8 pM (S/N = 3). Also, the formed PAAG provided a 3D molecular network to orderly secure the assembled nanoparticles (NPs), which not only improves the stability of NPs but also shields the Raman signal of proteins as high as 45 g/L allowing the direct determination of the binding rate of human serum albumin (HSA) and doxorubicin (DOX). A binding rate of about 70% was detected, which is consistent with previous reports. Thus, proposed the MeLLFs@PAAG SERS substrate can be used as a promising candidate for SERS measurement in complex biological samples.

A sandwich SERS detection system based on optical convergence and synergistic enhancement effects

In this research, we propose a novel microlens surface-enhanced Raman spectroscopy (SERS) substrate @ Au film detection system, which is shown to have excellent attributes. This scheme involves the construction of a PDMS plano-convex microlens SERS-active substrate in combination with an Au film. Due to the optical convergence from the microlens, the synergistic enhancement effects due to the Au film, and the "Au film-molecules-AgNPs" sandwich structure, an outstanding SERS performance is achieved. Multiple tests using a portable Raman spectrometer show that the optical convergence due to the microlens and the coupling effects contribute around 1.85× and 26.18× enhancement of the Raman signal, respectively. Even for objective lenses with different numerical apertures, simulations show that the microlens SERS substrate can further enhance the signal collection efficiency; this indicates that the detection scheme is universally applicable. Moreover, the microlens SERS substrate @ Au film system shows excellent time stability, and its Raman enhancement performance remains consistently above 98% of the original signal, even one week later. Our proposed system is simple to prepare, is low cost and has many potential practical applications, which include the detection of biochemical samples.

Exploiting Additives for Directing the Adsorption and Organization of Colloid Particles at Fluid Interfaces

The self-assembly of colloids at fluid interfaces is a well-studied research field both for gaining fundamental insights and for material fabrication. The fluid interface allows the confinement of particles in two dimensions and may act as a template for guiding their organization into soft and reconfigurable structures. Additives (e.g., surfactants, salts, and polymers) in the colloidal suspension are routinely used as a practical and effective tool to drive particle adsorption and tune their interfacial organization. However, some phenomena lying at the heart of the accumulation and self-assembly of particles at fluid interfaces remain poorly understood. This Feature Article aims to critically analyze the mechanisms involved in the adsorption and self-organization of micro- and nanoparticles at various fluid interfaces. In particular, we address the role of additives in both promoting the adsorption of particles from the bulk suspension to the fluid interface and in mediating the interactions between interfacial particles. We emphasize how different types of additives play a crucial role in controlling the interactions between suspended particles and the fluid interface as well as the interactions between adsorbed particles, thus dictating the final self-assembled structure. We also critically summarize the main experimental protocols developed for the complete adsorption of particles initially suspended in the bulk. Furthermore, we highlight some special properties (e.g., reconfigurability upon external stimulation and dissipative self-assembly) and the application potential of structures formed by colloid self-organization at fluid interfaces mediated/promoted by additives. We believe our contribution serves both as a practical roadmap to scientists coming from other fields and as a valuable information resource for all researchers interested in this exciting research field.

High-performance surface-enhanced Raman spectroscopy chip integrated with a micro-optical system for the rapid detection of creatinine in serum

To improve the sensitivity of disease biomarker detection, we proposed a high-performance surface-enhanced Raman spectroscopy (SERS) chip integrated with a micro-optical system (MOS). The MOS, which is based on the micro-reflecting cavity and the micro-lens, optimizes the optical matching characteristics of the SERS substrate and the Raman detection system, and greatly improves the SERS detection sensitivity by improving the collection efficiency of the Raman scattering signal. A uniform single layer of silver nanoparticles on a gold film was prepared as the SERS substrate using a liquid-liquid interface self-assembly method. The micro-reflecting cavity and micro-lens were prepared using micro-processing technology. The SERS chip was constructed based on the MOS and the Au film-based SERS substrate, and experimental results showed an EF of 1.46×10⁸, which is about 22.4 times higher than that of the Si-based SERS substrate. The chip was used for the detection of creatinine and the detection limit of creatinine in aqueous solution was 1 µM while the detection limit in serum was 5 µM. In addition, SERS testing was conducted on serum samples from normal people and patients with chronic renal impairment. Principal component analysis and linear discriminant analysis were used for modeling and identification, and the results showed a 90% accuracy of blind sample detection. These results demonstrate the value of this SERS chip for both research and practical applications in the fields of disease diagnosis and screening.

A cyclodextrin-decorated plasmonic gold nanosatellite substrate for selective detection of bipyridylium pesticides

A cyclodextrin-decorated gold nanosatellite (AuNSL) substrate was developed as a surface-enhanced Raman scattering sensor for the selective sensing of bipyridylium pesticides such as paraquat (PQ), diquat (DQ), and difenzoquat (DIF). The AuNSL structure was fabricated via vacuum deposition of gold nanoparticles (AuNPs) on a gold nanopillar substrate, and a large density of hot-spots was formed for Raman signal enhancement. Thiolated β-cyclodextrin (SH-CD) was surface-modified on the AuNSL as a chemical receptor. The detection limit of PQ, DQ, and DIF on the SH-CD-coated AuNSL (CD-AuNSL) was 0.05 ppm for each, and showed linear correlation in a concentration range of 10 ppm-0.05 ppm. Then, selective bipyridylium pesticide detection was performed by comparing the Raman intensity of each pesticide with and without the washing step. After the washing step, 90% of the PQ, DQ, and DIF Raman signals were maintained on the CD-AuNSL substrate with a uniform selectivity in a mapping area of 200 μm × 200 μm. Furthermore, selective pesticide detection was performed using a ground-apple solution without pretreatment. Raman signals were clearly observed after the washing step and they showed a limit of detection down to a concentration of 0.05 ppm for each pesticide. Principal component analysis (PCA) of the binary and ternary mixtures of PQ, DQ, and DIF showed that each component could be easily identified via the typical Raman fingerprint analysis. The developed CD-AuNSL is expected to be applied for various chemical sensors, especially for pyridine-containing toxic substances in the environment and metabolite biomarkers in biofluids.

Quantitative SERS sensor based on self-assembled Au@Ag heterogeneous nanocuboids monolayer with high enhancement factor for practical quantitative detection

Accurate and rapid quantitative detection of pesticide and pollutant levels in the actual sample can aid in protecting food security, environmental security, and human health. A high Raman enhancement factor and good repeatability of the surface-enhanced Raman spectroscopy (SERS) substrates are favorable to quantitative analysis. Herein, a quantitative SERS sensor based on constructed self-assembled plasmonic Au@Ag heterogeneous nanocuboids (Au@Ag NCs) monolayer was developed. The sensor was used to quantitatively detect the trace pesticides extracted from pear surfaces and pollutants in fishpond water. Densely packed Au@Ag NCs fabricated into large-scale monolayer films were chemically functionalized using 4-methyl-thiobenzoic acid (4-MBA) at the organic/aqueous interface, in which plentiful nanogaps contribute to increase hotspots. Their sharp corners and edges make the sensor have high SERS performance through providing abundant "hot spots." The obtained optically SERS-based sensor with uniform liquid-state interfacial nanoparticle arrays appeared to have nice SERS performance and uniformity using crystal violet (CV) as a probe molecule. In particular, the proposed SERS sensor was applied for quantitative detection of thiabendazole (TBZ) extracted from pear surfaces and malachite green (MG) in fishpond water down to levels of 0.0105 nM and 0.87 nM for SERS assay respectively. As a result, our proposed SERS quantitative detection strategy is quite preferred to on-site analysis and supervision of contaminant in food samples.

Hydrated Ionic Liquids Boost the Trace Detection Capacity of Proteins on TiO2 Support

Trace detection based on surface-enhanced Raman scattering (SERS) has attracted considerable attention, and exploiting efficient strategies to stretch the limit of detection and understanding the mechanisms on molecular level are of utmost importance. In this work, we use ionic liquids (ILs) as trace additives in a protein-TiO2 system, allowing us to obtain an exceptionally low limit of detection down to 10-9 M. The enhancement factors (EFs) were determined to 2.30 × 104, 6.17 × 104, and 1.19 × 105, for the three systems: one without ILs, one with ILs in solutions, and one with ILs immobilized on the TiO2 substrate, respectively, corresponding to the molecular forces of 1.65, 1.32, and 1.16 nN quantified by the atomic force microscopy. The dissociation and following hydration of ILs, occurring in the SERS system, weakened the molecular forces but instead improved the electron transfer ability of ILs, which is the major contribution for the observed excellent detection. The weaker diffusion of the hydrated IL ions immobilized on the TiO2 substrate did provide a considerably greater EF value, compared to the ILs in the solution. This work clearly demonstrates the importance of the hydration of ions, causing an improved electron transfer ability of ILs and leading to an exceptional SERS performance in the field of trace detection. Our results should stimulate further development to use ILs in SERS and related applications in bioanalysis, medical diagnosis, and environmental science.

Self-assembly of colloidal nanoparticles into 2D arrays at water-oil interfaces: rational construction of stable SERS substrates with accessible enhancing surfaces and tailored plasmonic response

Self-assembly at water-oil interfaces has been shown to be a cheap, convenient and efficient route to obtain densely packed layers of plasmonic nanoparticles which have small interparticle distances. This creates highly plasmonically active materials that can be used to give strong SERS enhancement and whose structure means that they are well suited to creating the highly stable, reproducible and uniform substrates that are needed to allow routine and accurate quantitative SERS measurements. A variety of methods have been developed to induce nanoparticle self-assembly at water-oil interfaces, fine tune the surface chemistry and adjust the position of the nanoparticles at the interface but only some of these are compatible with eventual use in SERS, where it is important that target molecules can access the active surface unimpeded. Similarly, it is useful to transform liquid plasmonic arrays into easy-to-handle free-standing solid films but these can only be used as solid SERS substrates if the process leaves the surface nanoparticles exposed. Here, we review the progress made in these research areas and discuss how these developments may lead towards achieving rational construction of tailored SERS substrates for sensitive and quantitative SERS analysis.

Three-dimensional porous SERS powder for sensitive liquid and gas detections fabricated by engineering dense "hot spots" on silica aerogel

A three-dimensional porous SERS powder material, Ag nanoparticles-engineered-silica aerogel, was developed. Utilizing an in situ chemical reduction strategy, Ag nanoparticles were densely assembled on porous aerogel structures, thus forming three-dimensional "hot spots" distribution with intrinsic large specific surface area and high porosity. These features can effectively enrich the analytes on the metal surface and provide huge near field enhancement. Highly sensitive and homogeneous SERS detections were achieved not only on the conventional liquid analytes but also on gas with the enhancement factor up to ∼10⁸ and relative standard deviation as small as ∼13%. Robust calibration curves were obtained from the SERS data, which demonstrates the potential for the quantification analysis. Moreover, the powder shows extraordinary SERS stability than the conventional Ag nanostructures, which makes long term storage and convenient usage feasible. With all of these advantages, the porous SERS powder material can be extended to on-site SERS "nose" applications such as liquid and gas detections for chemical analysis, environmental monitoring, and anti-terrorism.

Self-Assembled Au Nanoparticle Arrays for Precise Metabolic Assay of Cerebrospinal Fluid

Precise and rapid monitoring of metabolites in biofluids is a desirable but unmet goal for disease diagnosis and management. Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) exhibits advantages in metabolite analysis. However, the low accuracy in quantification of the technique limits its transformation to clinical usage. We report herein the use of Au nanoparticle arrays self-assembled at liquid-liquid interfaces for mass spectrometry (MS)-based quantitative biofluids metabolic profiling. The two-dimensional arrays feature uniformly and closely packed Au nanoparticles with 3 nm interparticle gaps. The experimental study and theoretical simulation show that the arrays exhibit high photothermal conversion and heat confinement effects, which enhance the laser desorption/ionization efficacy. With the nanoscale roughness, the AuNP arrays as laser desorption/ionization substrates can interrupt the coffee-ring effect during droplet evaporation. Therefore, high reproducibility (RSD <5%) is obtained, enabling accurate quantitative analysis of diverse metabolites from 1 μL of biofluids in seconds. By quantifying glucose in the cerebrospinal fluid (CSF), it allows us to identify patients with brain infection and rapidly evaluate the clinical therapy response. Consequently, the method shows potential in advanced metabolite analysis and biomedical diagnostics.

Large-Area Nanogap-Controlled 3D Nanoarchitectures Fabricated via Layer-by-Layer Nanoimprint

The fabrication of large-area and flexible nanostructures currently presents various challenges related to the special requirements for 3D multilayer nanostructures, ultrasmall nanogaps, and size-controlled nanomeshes. To overcome these rigorous challenges, a simple method for fabricating wafer-scale, ultrasmall nanogaps on a flexible substrate using a temperature above the glass transition temperature (Tg) of the substrate and by layer-by-layer nanoimprinting is proposed here. The size of the nanogaps can be easily controlled by adjusting the pressure, heating time, and heating temperature. In addition, 3D multilayer nanostructures and nanocomposites with 2, 3, 5, 7, and 20 layers were fabricated using this method. The fabricated nanogaps with sizes ranging from approximately 1 to 40 nm were observed via high-resolution transmission electron microscopy (HRTEM). The multilayered nanostructures were evaluated using focused ion beam (FIB) technology. Compared with conventional methods, our method could not only easily control the size of the nanogaps on the flexible large-area substrate but could also achieve fast, simple, and cost-effective fabrication of 3D multilayer nanostructures and nanocomposites without any post-treatment. Moreover, a transparent electrode and nanoheater were fabricated and evaluated. Finally, surface-enhanced Raman scattering substrates with different nanogaps were evaluated using rhodamine 6G. In conclusion, it is believed that the proposed method can solve the problems related to the high requirements of nanofabrication and can be applied in the detection of small molecules and for manufacturing flexible electronics and soft actuators.