Actuation of shape-memory colloidal fibres of Janus ellipsoids

Adsorption characteristics of Janus tadpole polymers

The shape of Janus particles is directly connected to their adsorption behavior. Janus tadpole polymers offer a unique topological architecture that includes competition between entropic, enthalpic, and topological terms in the adsorption free energy; accordingly, non-trivial adsorption behavior patterns are expected. We study the surface adsorption of Janus tadpole polymers by means of Monte Carlo simulations, finding that, depending on which part of the tadpole polymers is preferentially adsorbing on the surface, very different types of behavior for both the adsorbed polymeric phase and of the brush arise. The adsorbed phase and the brush mutually influence each other, leading to a variety of phenomena such as nematic ordering of the adsorbed stiff tadpole tails and intriguing changes in the territoriality of adsorbed ring polymers on the surface. We analyze in detail our findings, revealing the mechanisms behind the organization and ordering, and opening up new possibilities to tune and control the structure of such systems.

Nanosheet Particles with Defect-Free Block Copolymer Structures Driven by Emulsions Containing Crystallizable Surfactants

Highly anisotropic-shaped particles with well-ordered internal nanostructures have received significant attention due to their unique shape-dependent photonic, rheological, and electronic properties and packing structures. In this work, nanosheet particles with cylindrical block copolymer (BCP) arrays are achieved by utilizing collapsed emulsions as a scaffold for BCP self-assembly. Highly elongated structures with large surface areas are formed by employing crystallizable surfactants that significantly reduce the interfacial tension of BCP emulsions. Subsequently, the stabilized elongated emulsion structures lead to the formation of BCP nanosheets. Specifically, when polystyrene-block-polydimethylsiloxane (PS-b-PDMS) and 1-octadecanol (C18-OH) are co-assembled within an emulsion, C18-OH penetrates the surfactant layer at the emulsion interface, lowering the interfacial tension (i.e., below 1 mN m-1 ) and causing emulsion deformation. In addition, C18-OH crystallization allows for kinetic arrest of the collapsed emulsion shape during solvent evaporation. Consequently, PS-b-PDMS BCPs self-assemble into defect-free structures within nanosheet particles, exhibiting an exceptionally high aspect ratio of over 50. The particle formation mechanism is further investigated by controlling the alkyl chain length of the fatty alcohol. Finally, the coating behavior of nanosheet particles is investigated, revealing that the deposition pattern on a substrate is strongly influenced by the particle's shape anisotropy, thus highlighting their potential for advanced coating applications.

Synthesis of dimpled polymer particles and polymer particles with protrusions - Past, present, and future

Since the development of emulsion polymerization techniques, polymer particles have become the epitome of standard colloids due to the exceptional control over size, size distribution, and composition the synthesis methods allow reaching. The exploration of different variations of the synthesis methods has led to the discovery of more advanced techniques, enabling control over their composition and shape. Many early investigations focused on forming particles with protrusions (with one protrusion, called dumbbell particles) and particles with concavities, also called dimpled particles. This paper reviews the literature covering the synthesis, functionalization, and applications of both types of particles. The focus has been on the rationalization of the various approaches used to prepare such particles and on the discussion of the mechanisms of formation not just from the experimental viewpoint but also from the standpoint of thermodynamics. The primary motivation to combine in a single review the preparation of both types of particles has been the observation of similarities among some of the methods developed to prepare dimpled particles, which sometimes include the formation of particles with protrusions and vice versa. The most common applications of these particles have been discussed as well. By looking at the different approaches developed in the literature under one general perspective, we hope to stimulate a more ample use of these particles and promote the development of even more effective synthetic protocols.

Reconfigurable Grating Diffraction Structural Color in Self-Assembled Colloidal Crystals

Self-assembled colloidal crystals display structural colors due to light diffracted from their microscale, ordered structure. This color arises due to Bragg reflection (BR) or grating diffraction (GD); the latter mechanism is much less explored than the former. Here the design space for generating GD structural color is identified and its relative advantages are demonstrated. Electrophoretic deposition is used to self-assemble crystals with fine crystal grains from colloids of diameter 1.0 µm. The structural color in transmission is tunable across the full visible spectrum. The optimum optical response-represented by both color intensity and saturation-is observed at low layer number (≤5 layers). The spectral response is well predicted by Mie scattering of the crystals. Taken together, the experimental and theoretical results demonstrate that vivid grating colors with high color saturation can be produced from thin layers of micron-sized colloids. These colloidal crystals extend the potential of artificial structural color materials.

Facile Fabrication of Monodisperse Micron-Sized Dual Janus Silica Particles with Asymmetric Morphology and Chemical Environment

Janus particles are a kind of materials with asymmetric morphology or surface chemical environment. But so far, the preparation of particles with dual asymmetry is still a challenging problem. Hence the cation surfactant hexadecyl trimethyl ammonium bromide and co-surfactant octadecylamine are applied to improve the Pickering emulsion stability, and the micron-sized silica particles are arranged in a single layer at the toluene-water interface through electrostatic interaction. Furthermore, organosilane reagents are added in the preparation process, resulting in the construction of asymmetric hydrophilic or hydrophobic mesoporous precisely onto the micron-sized silica particles surface. The cation surfactant-assisted Pickering emulsion method is simple, effective, and convenience, which can be applied in the synthesis of various dual Janus silica particles for specific applications.

Microdynamics of active particles in defect-rich colloidal crystals

HYPOTHESIS

Because they are self-propulsive, active colloidal particles can interact with their environment in ways that differ from passive, Brownian particles. Here, we explore how interactions in different microstructural regions may contribute to colloidal crystal annealing.

EXPERIMENTS

We investigate active particles propagating in a quasi-2D colloidal crystal monolayer produced by alternating current electric fields (active-to-passive particle ratio ∼ 1:720). The active particle is a platinum Janus sphere propelled by asymmetric decomposition of hydrogen peroxide. Crystals are characterized for changes in void properties. The mean-squared-displacement of Janus particles are measured to determine how active microdynamics depend on the local microstructure, which is comprised of void regions, void-adjacent regions (defined as within three particle diameters of a void), and interstitial regions.

FINDINGS

At active particle energy E_A = 2.55 k_BT, the average void size increases as much as three times and the average void anisotropy increases about 40% relative to the passive case. The average microdynamical enhancement, <δ(t)>, of Janus particles in the crystal relative to an equivalent passive Janus particle is reduced compared to that of a free, active particle (<δ(t) > is 1.88 ± 0.04 and 2.66 ± 0.08, respectively). The concentration of active particles is enriched in void and void-adjacent regions. Active particles exhibit the greatest change in dynamics relative to the passive control in void-adjacent regions (<δ(t)> = 2.58 ± 0.06). The results support the conjecture that active particle microdynamical enhancement in crystal lattices is affected by local defect structure.

Hybrid Nanoparticles at Fluid-Fluid Interfaces: Insight from Theory and Simulation

Hybrid nanoparticles that combine special properties of their different parts have numerous applications in electronics, optics, catalysis, medicine, and many others. Of the currently produced particles, Janus particles and ligand-tethered (hairy) particles are of particular interest both from a practical and purely cognitive point of view. Understanding their behavior at fluid interfaces is important to many fields because particle-laden interfaces are ubiquitous in nature and industry. We provide a review of the literature, focusing on theoretical studies of hybrid particles at fluid-fluid interfaces. Our goal is to give a link between simple phenomenological models and advanced molecular simulations. We analyze the adsorption of individual Janus particles and hairy particles at the interfaces. Then, their interfacial assembly is also discussed. The simple equations for the attachment energy of various Janus particles are presented. We discuss how such parameters as the particle size, the particle shape, the relative sizes of different patches, and the amphiphilicity affect particle adsorption. This is essential for taking advantage of the particle capacity to stabilize interfaces. Representative examples of molecular simulations were presented. We show that the simple models surprisingly well reproduce experimental and simulation data. In the case of hairy particles, we concentrate on the effects of reconfiguration of the polymer brushes at the interface. This review is expected to provide a general perspective on the subject and may be helpful to many researchers and technologists working with particle-laden layers.

Field-Pulse-Induced Annealing of 2D Colloidal Polycrystals

Two-dimensional colloidal crystals are of considerable fundamental and practical importance. However, their quality is often low due to the widespread presence of domain walls and defects. In this work, we explored the annealing process undergone by monolayers of superparamagnetic colloids adsorbed onto fluid interfaces in the presence of magnetic field pulses. These systems present the extraordinary peculiarity that both the extent and the character of interparticle interactions can be adjusted at will by simply varying the strength and orientation of the applied field so that the application of field pulses results in a sudden input of energy. Specifically, we have studied the effect of polycrystal size, pulse duration, slope and frequency on the efficiency of the annealing process and found that (i) this strategy is only effective when the polycrystal consists of less than approximately 10 domains; (ii) that the pulse duration should be of the order of magnitude of the time required for the outer particles to travel one diameter during the heating step; (iii) that the quality of larger polycrystals can be slightly improved by applying tilted pulses. The experimental results were corroborated by Brownian dynamics simulations.

Shape-Mediated Oriented Assembly of Concave Nanoparticles under Cylindrical Confinement

This contribution describes the self-assembly of colloidal nanodumbbells (NDs) with tunable shapes within cylindrical channels. We present that the intrinsic concave geometry of NDs endows them with peculiar packing and interlocking behaviors, which, in conjunction with the adjustable confinement constraint, leads to a variety of superstructures such as tilted-ladder chains and crossed-chain superlattices. A mechanistic investigation, corroborated by geometric calculations, reveals that the phase behavior of NDs under strong confinement can be rationalized by the entropy-driven maximization of the packing efficiency. Based on the experimental results, an empirical phase diagram is generated, which could provide general guidance in the design of intended superstructures from NDs. This study provides essential insight into how the interplay between the particle shape and confinement conditions can be exploited to direct the orientationally ordered assembly of concave nanoparticles into unusual superlattices.

Long-range transport and directed assembly of charged colloids under aperiodic electrodiffusiophoresis

Faradaic reactions often lead to undesirable side effects during the application of electric fields. Therefore, experimental designs often avoid faradaic reactions by working at low voltages or at high frequencies, where the electrodes behave as ideally polarizable. In this work, we show how faradaic processes under ac fields can be used advantageously to effect long-range transport, focusing and assembly of charged colloids. Herein, we use confocal microscopy and ratiometric analysis to confirm that ac fields applied in media of low conductivity induce significant pH gradients below and above the electrode charging frequency of the system. At voltages above 1 V_pp, and frequencies below 1.7 kHz, the pH profile becomes highly nonlinear. Charged particles respond to such conditions by migrating towards the point of highest pH, thereby focusing tens of microns away from both electrodes. Under the combination of oscillating electric fields and concentration gradients of electroactive species, particles experience aperiodic electrodiffusiophoresis (EDP). The theory of EDP, along with a mass transport model, describes the dynamics of particles. Furthermore, the high local concentration of particles near the focusing point leads to disorder-order transitions, whereby particles form crystals. The position and order within the levitating crystalline sheet can be readily tuned by adjusting the voltage and frequency. These results not only have significant implications for the fundamental understanding of ac colloidal electrokinetics, but also provide new possibilities for the manipulation and directed assembly of charged colloids.

1D Colloidal chains: recent progress from formation to emergent properties and applications

Integrating nanoscale building blocks of low dimensionality (0D; i.e., spheres) into higher dimensional structures endows them and their corresponding materials with emergent properties non-existent or only weakly existent in the individual building blocks. Constructing 1D chains, 2D arrays and 3D superlattices using nanoparticles and colloids therefore continues to be one of the grand goals in colloid and nanomaterial science. Amongst these higher order structures, 1D colloidal chains are of particular interest, as they possess unique anisotropic properties. In recent years, the most relevant advances in 1D colloidal chain research have been made in novel synthetic methodologies and applications. In this review, we first address a comprehensive description of the research progress concerning various synthetic strategies developed to construct 1D colloidal chains. Following this, we highlight the amplified and emergent properties of the resulting materials, originating from the assembly of the individual building blocks and their collective behavior, and discuss relevant applications in advanced materials. In the discussion of synthetic strategies, properties, and applications, particular attention will be paid to overarching concepts, fresh trends, and potential areas of future research. We believe that this comprehensive review will be a driver to guide the interdisciplinary field of 1D colloidal chains, where nanomaterial synthesis, self-assembly, physical property studies, and material applications meet, to a higher level, and open up new research opportunities at the interface of classical disciplines.

Computer simulations of self-assembly of anisotropic colloids

Computer simulations have played a significant role in understanding the physics of colloidal self-assembly, interpreting experimental observations, and predicting novel mesoscopic and crystalline structures. Recent advances in computer simulations of colloidal self-assembly driven by anisotropic or orientation-dependent inter-particle interactions are highlighted in this review. These interactions are broadly classified into two classes: entropic and enthalpic interactions. They mainly arise due to shape anisotropy, surface heterogeneity, compositional heterogeneity, external field, interfaces, and confinements. Key challenges and opportunities in the field are discussed.

Field-Induced Assembly and Propulsion of Colloids

Electric and magnetic fields have enabled both technological applications and fundamental discoveries in the areas of bottom-up material synthesis, dynamic phase transitions, and biophysics of living matter. Electric and magnetic fields are versatile external sources of energy that power the assembly and self-propulsion of colloidal particles. In this Invited Feature Article, we classify the mechanisms by which external fields impact the structure and dynamics in colloidal dispersions and augment their nonequilibrium behavior. The paper is purposely intended to highlight the similarities between electrically and magnetically actuated phenomena, providing a brief treatment of the origin of the two fields to understand the intrinsic analogies and differences. We survey the progress made in the static and dynamic assembly of colloids and the self-propulsion of active particles. Recent reports of assembly-driven propulsion and propulsion-driven assembly have blurred the conceptual boundaries and suggest an evolution in the research of nonequilibrium colloidal materials. We highlight the emergence of colloids powered by external fields as model systems to understand living matter and provide a perspective on future challenges in the area of field-induced colloidal phenomena.

Shape Matters in Magnetic-Field-Assisted Assembly of Prolate Colloids

An anisotropic colloidal shape in combination with an externally tunable interaction potential results in a plethora of self-assembled structures with potential applications toward the fabrication of smart materials. Here we present our investigation on the influence of an external magnetic field on the self-assembly of hematite-silica core-shell prolate colloids for two aspect ratios ρ = 2.9 and 3.69. Our study shows a rather counterintuitive but interesting phenomenon, where prolate colloids self-assemble into oblate liquid crystalline (LC) phases. With increasing concentration, particles with smaller ρ reveal a sequence of LC phases involving para-nematic, nematic, smectic, and oriented glass phases. The occurrence of a smectic phase for colloidal ellipsoids has been neither predicted nor reported before. Quantitative shape analysis of the particles together with extensive computer simulations indicate that in addition to ρ, a subtle deviation from the ideal ellipsoidal shape dictates the formation of this unusual sequence of field-induced structures. Particles with ρ = 2.9 exhibit a hybrid shape containing features from both spherocylinders and ellipsoids, which make their self-assembly behavior richer than that observed for either of the "pure" shapes. The shape of the particles with higher ρ matches closely with the ideal ellipsoids, as a result their phase behavior follows the one expected for a "pure" ellipsoidal shape. Using anisotropic building blocks and external fields, our study demonstrates the ramifications of the subtle changes in the particle shape on the field-directed self-assembled structures with externally tunable properties.

Co-Assembly of Biosynthetic Chiral Nematic Adhesive Materials with Dynamic Polarized Luminescence

There is currently an extensive demand for simple and effective synthetic methods to allow the design and fabrication of robust and flexible chiral materials that can generate strong and switchable circularly polarized luminescence (CPL). Herein, biosynthetic light-emitting adhesive materials based upon chiral nematic cellulose nanocrystal-polyelectrolyte complexes with universal high adhesion on both hydrophilic and hydrophobic substrates are reported. Strong and dynamic photoluminescence with highly asymmetric and switchable circular polarization is induced by minute rare earth europium doping without compromising adhesive strength and initial iridescent properties. The photoluminescence can be temporarily quenched with highly volatile acetone vapor and liquid followed by fast recovery after drying with full restoration of initial emission. The unique properties of light-emitting bio-adhesives with universal adhesion, amplified and dynamic photoluminescence, and large and switchable CPL can be utilized for security optical coding, bio-optical memory, hidden communication, and biochemical sensing as wearable stickers, prints, and tattoos to directly adhere to human clothes, gadgets, and skin by using adhesive stickers with bright tailored photoluminescence.

Colloidal Self-Assembly Approaches to Smart Nanostructured Materials

Colloidal self-assembly refers to a solution-processed assembly of nanometer-/micrometer-sized, well-dispersed particles into secondary structures, whose collective properties are controlled by not only nanoparticle property but also the superstructure symmetry, orientation, phase, and dimension. This combination of characteristics makes colloidal superstructures highly susceptible to remote stimuli or local environmental changes, representing a prominent platform for developing stimuli-responsive materials and smart devices. Chemists are achieving even more delicate control over their active responses to various practical stimuli, setting the stage ready for fully exploiting the potential of this unique set of materials. This review addresses the assembly of colloids into stimuli-responsive or smart nanostructured materials. We first delineate the colloidal self-assembly driven by forces of different length scales. A set of concepts and equations are outlined for controlling the colloidal crystal growth, appreciating the importance of particle connectivity in creating responsive superstructures. We then present working mechanisms and practical strategies for engineering smart colloidal assemblies. The concepts underpinning separation and connectivity control are systematically introduced, allowing active tuning and precise prediction of the colloidal crystal properties in response to external stimuli. Various exciting applications of these unique materials are summarized with a specific focus on the structure-property correlation in smart materials and functional devices. We conclude this review with a summary of existing challenges in colloidal self-assembly of smart materials and provide a perspective on their further advances to the next generation.

Anisotropic colloidal interactions & assembly in AC electric fields

We match experimental and simulated configurations of anisotropic epoxy colloidal particles in high frequency AC electric fields by identifying analytical potentials for dipole-field and dipole-dipole interactions. We report an inverse Monte Carlo simulation algorithm to determine optimal fits of analytical potentials by matching simulated and experimental distribution functions for non-uniform liquid, liquid crystal, and crystal microstructures in varying amplitude electric fields. Two potentials that include accurate particle volume and dimensions along with a concentration dependent prefactor quantitatively capture experimental observations. At low concentrations, an effective ellipsoidal point dipole potential works well, whereas a novel stretched point dipole potential is found to be suitable at all concentrations, field amplitudes, and degrees of ordering. The simplicity, accuracy, and adjustability of the stretched point dipole potential suggest it can be applied to model field mediated microstructures and assembly of systematically varying anisotropic particle shapes.

Revealing viscoelastic bending relaxation dynamics of isolated semiflexible colloidal polymers

The viscoelastic properties of filaments and biopolymers play a crucial role in soft and biological materials from biopolymer networks to novel synthetic metamaterials. Colloidal particles with specific valency allow mimicking polymers and more complex molecular structures at the colloidal scale, offering direct observation of their internal degrees of freedom. Here, we elucidate the time-dependent viscoelastic response in the bending of isolated semi-flexible colloidal polymers, assembled from dipatch colloidal particles by reversible critical Casimir forces. By tuning the patch-patch interaction strength, we adjust the polymers' viscoelastic properties, and follow spontaneous bending modes and their relaxation directly on the particle level. We find that the elastic response is well described by that of a semiflexible rod with persistence length of order 1000 μm, tunable by the critical Casimir interaction strength. We identify the viscous relaxation on longer timescales to be due to internal friction, leading to a wavelength-independent relaxation time similar to single biopolymers, but in the colloidal case arising from the contact mechanics of the bonded patches. These tunable mechanical properties of assembled colloidal filaments open the door to "colloidal architectures", rationally designed (network) structures with desired topology and mechanical properties.

Coupling morphological and magnetic anisotropy for assembling tetragonal colloidal crystals

Morphological and magnetic anisotropy can be combined in colloidal assembly to create unconventional secondary structures. We show here that magnetite nanorods interact along a critical angle, depending on their aspect ratios and assemble into body-centered tetragonal colloidal crystals. Under a magnetic field, size-dependent attractive and repulsive domains develop on the ends and center of the nanorods, respectively. Our joint experiment-computational multiscale study demonstrates the presence of a critical angle in the attractive domain, which defines the equilibrium bonding states of interacting rods and leads to the formation of non–close-packed yet hard-contact tetragonal crystals. Small-angle x-ray scattering measurement attributes the perfect tetragonal phase to the slow assembly kinetics. The crystals exhibit brilliant structural colors, which can be actively tuned by changing the magnetic field direction. These highly ordered frameworks and well-defined three-dimensional nanochannels may offer new opportunities for manipulating nanoscale chemical transformation, mass transportation, and wave propagation.

Revealing Polymerization Kinetics with Colloidal Dipatch Particles

Limited-valency colloidal particles can self-assemble into polymeric structures analogous to molecules. While their structural equilibrium properties have attracted wide attention, insight into their dynamics has proven challenging. Here, we investigate the polymerization dynamics of semiflexible polymers in 2D by direct observation of assembling divalent particles, bonded by critical Casimir forces. The reversible critical Casimir force creates living polymerization conditions with tunable chain dissociation, association, and bending rigidity. We find that unlike dilute polymers that show exponential size distributions in excellent agreement with Flory theory, concentrated samples exhibit arrest of rotational and translational diffusion due to a continuous isotropic-to-nematic transition in 2D, slowing down the growth kinetics. These effects are circumvented by the addition of higher-valency particles, cross linking the polymers into networks. Our results connecting polymer flexibility, polymer interactions, and the peculiar isotropic-nematic transition in 2D offer insight into the polymerization processes of synthetic two-dimensional polymers and biopolymers at membranes and interfaces.

Accelerated annealing of colloidal crystal monolayers by means of cyclically applied electric fields

External fields are commonly applied to accelerate colloidal crystallization; however, accelerated self-assembly kinetics can negatively impact the quality of crystal structures. We show that cyclically applied electric fields can produce high quality colloidal crystals by annealing local disorder. We find that the optimal off-duration for maximum annealing is approximately one-half of the characteristic melting half lifetime of the crystalline phase. Local six-fold bond orientational order grows more rapidly than global scattering peaks, indicating that local restructuring leads global annealing. Molecular dynamics simulations of cyclically activated systems show that the ratio of optimal off-duration for maximum annealing and crystal melting time is insensitive to particle interaction details. This research provides a quantitative relationship describing how the cyclic application of fields produces high quality colloidal crystals by cycling at the fundamental time scale for local defect rearrangements; such understanding of dynamics and kinetics can be applied for reconfigurable colloidal assembly.

Fabrication and Electric Field-Driven Active Propulsion of Patchy Microellipsoids

Active colloids are a synthetic analogue of biological microorganisms that consume external energy to swim through viscous fluids. Such motion requires breaking the symmetry of the fluid flow in the vicinity of a particle; however, it is challenging to understand how surface and shape anisotropies of the colloid lead to a particular trajectory. Here, we attempt to deconvolute the effects of particle shape and surface anisotropy on the propulsion of model ellipsoids in alternating current (AC) electric fields. We first introduce a simple process for depositing metal patches of various shapes on the surfaces of ellipsoidal particles. We show that the shape of the metal patch is governed by the assembled structure of the ellipsoids on the substrate used for physical vapor deposition. Under high-frequency AC electric field, ellipsoids dispersed in water show linear, circular, and helical trajectories which depend on the shapes of the surface patches. We demonstrate that features of the helical trajectories such as the pitch and diameter can be tuned by varying the degree of patch asymmetry along the two primary axes of the ellipsoids, namely longitudinal and transverse. Our study reveals the role of patch shape on the trajectory of ellipsoidal particles propelled by induced charge electrophoresis. We develop heuristics based on patch asymmetries that can be used to design patchy particles with specified nonlinear trajectories.

Reversible Design of Dynamic Assemblies at Small Scales

Emerging bottom-up fabrication methods have enabled the assembly of synthetic colloids, microrobots, living cells, and organoids to create intricate structures with unique properties that transcend their individual components. This review provides an access point to the latest developments in externally driven assembly of synthetic and biological components. In particular, we emphasize reversibility, which enables the fabrication of multiscale systems that would not be possible under traditional techniques. Magnetic, acoustic, optical, and electric fields are the most promising methods for controlling the reversible assembly of biological and synthetic subunits since they can reprogram their assembly by switching on/off the external field or shaping these fields. We feature capabilities to dynamically actuate the assembly configuration by modulating the properties of the external stimuli, including frequency and amplitude. We describe the design principles which enable the assembly of reconfigurable structures. Finally, we foresee that the high degree of control capabilities offered by externally driven assembly will enable broad access to increasingly robust design principles towards building advanced dynamic intelligent systems.

Self-Assembly of Silica-Gold Core-Shell Microparticles by Electric Fields Toward Dynamically Tunable Metamaterials

Metamaterials, rationally engineered composite materials with exotic properties, have provided unprecedented opportunities to manipulate the propagation of electromagnetic waves and control light-matter interactions in a prescribed manner. At present, most metamaterials are in solid states, and their functions are fixed once fabricated. Applying external electric fields to assemble metallic and metallodielectric particles into distinct configurations is an approach to realize dynamically tunable or reconfigurable metamaterials. In this paper, we show that core-shell microparticles can be self-assembled into chain structures under an alternating current (AC) electric field at different oscillation frequencies. We have conducted optical characterizations of silica-gold core-shell particles by Fourier transform infrared (FTIR) spectroscopy, which show distinct optical responses at mid-infrared wavelengths before and after the chain formation. Full-wave simulations unveil that the spectral features arise from the coupling between the sophisticated plasmonic resonant modes of individual core-shell particles. The reconfigurable metamaterials based on the manipulation and assembly of metallic and metallodielectric particles have potential applications in optofluidic devices, liquid-borne microcircuits, and optical sensing.

Directional and Reconfigurable Assembly of Metallodielectric Patchy Particles

Colloidal particles with surface patches can self-assemble with high directionality, but the resulting assemblies cannot reconfigure unless the patch arrangement (number, symmetry, etc.) is altered. While external fields with tunable inputs can guide the assembly of dynamic structures, they encourage particle alignment relative to its shape rather than the surface patterns. Here, we report on the synthesis of metallodielectric patchy particles and their assembly under the AC electric field, which gives rise to a series of structures including two-layer alternating chains, open-brick walls, staggering stacks, and vertical chains that are directed by the patches yet reconfigurable by the field. The configurations of the assemblies (e.g., the chains) can be further switched between a rigid and a flexible state emulating the conformations of polymers. Our work suggests that, for directed colloidal assembly, the particle complexities (patches and shapes) can be coupled with the external manipulations in a cooperative manner for creating materials with precise yet reconfigurable structures.

A temperature-controlled electric field sample environment for small-angle neutron scattering experiments

A new sample environment is introduced for the study of soft matter samples in electric fields using small-angle neutron scattering instruments. The sample environment is temperature controlled and features external electrodes, allowing standard quartz cuvettes to be used and conducting samples or samples containing ions to be investigated without the risk of electrochemical reactions occurring at the electrodes. For standard 12.5 mm quartz cuvettes, the maximum applied field is 8 kV/cm, and the applied field may be static or alternating (up to 10 kHz for 8 kV/cm and up to 60 kHz for 4 kV/cm). The electric fields within the sample are calculated and simulated under a number of different conditions, and the capabilities of the setup are demonstrated using a variety of liquid crystalline samples. Measurements were performed as a function of temperature and time spent in the electric field. Finally, the advantages, drawbacks, and potential optimization of the sample environment are discussed with reference to applications in the fields of complex soft matter, biology, and electrorheology.

Janus Particles at Fluid Interfaces: Stability and Interfacial Rheology

The use of the Janus motif in colloidal particles, i.e., anisotropic surface properties on opposite faces, has gained significant attention in the bottom-up assembly of novel functional structures, design of active nanomotors, biological sensing and imaging, and polymer blend compatibilization. This review is focused on the behavior of Janus particles in interfacial systems, such as particle-stabilized (i.e., Pickering) emulsions and foams, where stabilization is achieved through the binding of particles to fluid interfaces. In many such applications, the interface could be subjected to deformations, producing compression and shear stresses. Besides the physicochemical properties of the particle, their behavior under flow will also impact the performance of the resulting system. This review article provides a synopsis of interfacial stability and rheology in particle-laden interfaces to highlight the role of the Janus motif, and how particle anisotropy affects interfacial mechanics.

Straightforward preparation of supramolecular Janus nanorods by hydrogen bonding of end-functionalized polymers

Janus cylinders are one-dimensional colloids that have two faces with different compositions and functionalities, and are useful as building blocks for advanced functional materials. Such anisotropic objects are difficult to prepare with nanometric dimensions. Here we describe a robust and versatile strategy to form micrometer long Janus nanorods with diameters in the 10-nanometer range, by self-assembly in water of end-functionalized polymers. The Janus topology is not a result of the phase segregation of incompatible polymer arms, but is driven by the interactions between unsymmetrical and complementary hydrogen bonded stickers. Therefore, even compatible polymers can be used to form these Janus objects. In fact, any polymers should qualify, as long as they do not prevent co-assembly of the stickers. To illustrate their applicative potential, we show that these Janus nanorods can efficiently stabilize oil-in-water emulsions.

Fabrication of magnetic colloidal bicones and their switchable self-assembly

The creation and fabrication of novel shapes are of paramount importance for colloids to self-assemble into desired structured materials and in order to use them as model systems for fundamental studies. Here, we demonstrate a simple yet effective method to fabricate bicone-shaped colloids by using SiO₂/PS core/shell particles through a thermal stretching route. The shape parameters are tunable. The aspect ratio is found to be predictable, and the experimental results are consistent with the model calculations. The yields are high enough to be used for self-assembly studies. As an illustration, we investigate the phase behavior of particles when interacting with depletion forces and show that the particles can form hexagonal or non-hexagonal crystal lattices in quasi-two-dimensional space. The method also allows functional nanoparticles to be integrated into the cores, resulting in responsive colloidal bicones. Moreover, the magnetically responsive self-assembly of particles is demonstrated.

Shape-Anisotropy-Induced Ordered Packings in Cylindrical Confinement

Densest possible packings of identical spheroids in cylindrical confinement have been obtained through Monte Carlo simulations. By varying the shape anisotropy of spheroids and also the cylinder-to-spheroid size ratio, a variety of densest possible crystalline structures have been discovered, including achiral structures with specific orientations of particles and chiral helical structures with rotating orientations of particles. Our findings reveal a transition between confinement-induced chiral ordering and shape-anisotropy-induced orientational ordering and would serve as a guide for the fabrication of crystalline wires using anisotropic particles.

How patchiness controls the properties of chain-like assemblies of colloidal platelets

Patchy colloidal platelets with non-spherical shapes have been realized with different materials at length scales ranging from nanometers to microns. While the assembly of these hard shapes tends to maximize edge-to-edge contacts, as soon as a directional attraction is added-by means of, e.g. specific ligands along the particle edges-a competition between shape and bonding anisotropy sets in, giving rise to a complex assembly scenario. Here we focus on a two-dimensional system of patchy rhombi, i.e. colloidal platelets with a regular rhombic shape decorated with bonding sites along their perimeter. Specifically, we consider rhombi with two patches, placed on either opposite or adjacent edges. While for the first particle class only chains can form, for the latter we observe the emergence of either chains or loops, depending on the system parameters. According to the patch positioning-classified in terms of different configurations, topologies and distances from the edge center-we are able to characterize the emerging chain-like assemblies in terms of length, packing abilities, flexibility properties and nematic ordering.

Stimuli-Responsive Microarray Films for Real-Time Sensing of Surrounding Media, Temperature, and Solution Properties via Diffraction Patterns

Stimuli-responsive polymers have attracted increasing attention over the years due to their ability to alter physiochemical properties upon external stimuli. However, many stimuli-responsive polymer-based sensors require specialized and expensive equipment, which limits their applications. Here an inexpensive and portable sensing platform of novel microarray films made of stimuli-responsive polymers is introduced for the real-time sensing of various environmental changes. When illuminated by laser light, microarray films generate diffraction patterns that can reflect and magnify variations of the periodical microstructure induced by surrounding invisible parameters in real time. Stimuli-responsive polyelectrolyte complexes are structured into micropillar arrays to monitor the pH variation and the presence of calcium ions based on reversible swelling/shrinking behaviors of the polymers. A pH hysteretic effect of the selected polyelectrolyte pair is determined and explained. Furthermore, polycaprolactone microchamber arrays are fabricated and display a thermal-driven structural change, which is exploited for photonic threshold temperature detection. Experimentally observed diffraction patterns are additionally compared with rigorous coupled-wave analysis simulations that prove that induced diffraction pattern alterations are solely caused by geometrical microstructure changes. Microarray-based diffraction patterns are a novel sensing platform with versatile sensing capabilities that will likely pave the way for the use of microarray structures as photonic sensors.

Thermo-responsive plasmonic systems: old materials with new applications

Thermo-responsive plasmonic systems of gold and poly(N-isopropylacrylamide) have been actively studied for several decades but this system keeps reinventing itself, with new concepts and applications which seed new fields. In this minireview, we show the latest few years development and applications of this intriguing system. We start from the basic working principles of this puzzling system which shows different plasmon shifts for even slightly different chemistries. We then present its applications to colloidal actuation, plasmon/meta-film tuning, and bioimaging and sensing. Finally we briefly summarize and propose several promising applications of the ongoing effort in this field.

Exploiting Supramolecular Interactions from Polymeric Colloids for Strong Anisotropic Adhesion between Solid Surfaces

Adhesion occurs by covalent bonding, as in reactive structural adhesives, or through noncovalent interactions, which are nearly ubiquitous in nature. A classic example of the latter is gecko feet, where hierarchical features enhance friction across the contact area. Biomimicry of such structured adhesion is regularly achieved by top-down lithography, which allows for direction-dependent detachment. However, bottom-up approaches remain elusive given the scarcity of building blocks that yield strong, cohesive, self-assembly across multiple length scales. Herein, an exception is introduced, namely, aqueous dispersions of cellulose nanocrystals (CNCs) that form superstructured, adherent layers between solid surfaces upon confined evaporation-induced self-assembly (C-EISA). The inherently strong CNCs (E_A > 140 GPa) align into rigid, nematically ordered lamellae across multiple length scales as a result of the stresses associated with confined evaporation. This long-range order produces remarkable anisotropic adhesive strength when comparing in-plane (≈7 MPa) and out-of-plane (≤0.08 MPa) directions. These adhesive attributes, resulting from self-assembly, substantially outperform previous biomimetic adhesives obtained by top-down microfabrication (dry adhesives, friction driven), and represent a unique fluid (aqueous)-based system with significant anisotropy of adhesion. By using C-EISA, new emergent properties will be closely tied with the nature of colloids and their hierarchical assemblies.

AC Electric Field Mediated Assembly of Bacterial Tetrads

Understanding spatiotemporal organization in bacteria under an external AC electric field is not only very interesting from a perspective of studying assembly and disassembly in a model biofilm but also provides insight into the intricate role of anisotropic interaction with bacterial dynamics that can generate interesting complex structures. In the current study, using confocal microscopy, we demonstrate such complex assemblies of monodisperse tetrad clusters of Micrococcus luteus, an environmental bacterium synthesized under a controlled growth condition. These clusters under the AC field produce a range of interesting structures such as chains, double helix, and bundles, which are instantaneously reversible when the field is switched off. Our studies can provide important insights into the natural organization of the clustered bacterium (with relevance in biofilm-like states) and generate strategies for biomaterial fabrication with a switchable functionality.

Multivalent Patchy Colloids for Quantitative 3D Self-Assembly Studies

We report methods to synthesize sub-micron- and micron-sized patchy silica particles with fluorescently labeled hemispherical titania protrusions, as well as routes to efficiently characterize these particles and self-assemble these particles into non-close-packed structures. The synthesis methods expand upon earlier work in the literature, in which silica particles packed in a colloidal crystal were surface-patterned with a silane coupling agent. Here, hemispherical amorphous titania protrusions were successfully labeled with fluorescent dyes, allowing for imaging by confocal microscopy and super-resolution techniques. Confocal microscopy was exploited to experimentally determine the numbers of protrusions per particle over large numbers of particles for good statistical significance, and these distributions were compared to simulations predicting the number of patches as a function of core particle polydispersity and maximum separation between the particle surfaces. We self-assembled these patchy particles into open percolating gel networks by exploiting solvophobic attractions between the protrusions.

Acoustophoretic assembly of millimeter-scale Janus fibers

This article presents a method for the assembly of millimeter-scale Janus fibers using acoustophoresis as an assembly mechanism. An acoustic flow cell mounted to a 3D printer combines acoustophoresis and additive manufacturing in a unique approach that allows for the assembly of textured Janus fibers. A dispersion consisting of polymethylmethacrylate (PMMA) filler particles in a UV curable polymer resin is passed through an acoustically excited capillary tube. To fundamentally understand this process, we develop a suspension balance model that accounts for acoustophoresis and concentration-driven shear-induced diffusion. Once assembled, the particle-polymer dispersion is cured using UV illumination to create a polymer composite fiber with particles immobilized on one side in a Janus-like configuration. The Janus fiber is observed to modify the light transmission profile when rotated on an optical microscope stage. Tensile measurements of the fiber show that the Young's modulus of the Janus fiber (50.5 MPa) is approximately twice that of a fiber fabricated from the polymer alone (24.7 MPa). The process we describe here could serve as a pathway for the fabrication of a variety of functional Janus fibers with possible applications to wearable textiles, soft robotics or surgical sutures.

Anisotropy effects on the kinetics of colloidal crystallization and melting: comparison of spheres and ellipsoids

We use alternating current (AC) electric field assisted self-assembly to produce two-dimensional, millimeter scale arrays of ellipsoidal colloids and study the kinetics of their phase reconfiguration by means of confocal microscopy, light scattering, and computer simulation. We find that the kinetics of orientational and positional ordering can be manipulated by changing the shape of the colloids: ellipsoids with aspect ratio 2.0 melt into disordered structures 5.7 times faster compared to spheres. On the other hand, ellipsoids self-assemble into ordered crystals at a similar rate to spheres. Confocal microscopy is used to directly visualize defects in the self-assembled structures. Small-angle light scattering (SALS) quantifies the light diffraction response, which is sensitive to the kinetics of positional and orientational ordering in the self-assembled anisotropic structures. We find three different light diffraction patterns: a phase with high orientational order (with chain-like structure in real space), a phase with high positional and orientational order (characteristic of a close-packed structure), and a phase that is disordered in position but with intermediate orientational order. The large influence of aspect ratio on the kinetics of the positionally and orientationally ordered phase is explored through simulation; it is found that the number of particle degrees of freedom controls the difference between the melting rates of the ellipsoids and spheres. This research contributes to the understanding of reconfiguration kinetics and optical properties of colloidal crystals produced from anisotropic colloids.

Colloidal fibers and rings by cooperative assembly

Janus colloids with one attractive patch on an otherwise repulsive particle surface serve as model systems to explore structure formation of particles with chemically heterogeneous surfaces such as proteins. While there are numerous computer studies, there are few experimental realizations due to a lack of means to produce such colloids with a well-controlled variable Janus balance. Here, we report a simple scalable method to precisely vary the Janus balance over a wide range and selectively functionalize one patch with DNA. We observe, via experiment and simulation, the dynamic formation of diverse superstructures: colloidal micelles, chains, or bilayers, depending on the Janus balance. Flexible dimer chains form through cooperative polymerization while trimer chains form by a two-stage process, first by cooperative polymerization into disordered aggregates followed by condensation into more ordered stiff trimer chains. Introducing substrate binding through depletion catalyzes dimer chains to form nonequilibrium rings that otherwise do not form.

Hybrid Janus Particles: Challenges and Opportunities for the Design of Active Functional Interfaces and Surfaces

Janus particles are a unique class of multifunctional patchy particles combining two dissimilar chemical or physical functionalities at their opposite sides. The asymmetry characteristic for Janus particles allows them to self-assemble into sophisticated structures and materials not attainable by their homogeneous counterparts. Significant breakthroughs have recently been made in the synthesis of Janus particles and the understanding of their assembly. Nevertheless, the advancement of their applications is still a challenging field. In this Review, we highlight recent developments in the use of Janus particles as building blocks for functional materials. We provide a brief introduction into the synthetic strategies for the fabrication of JPs and their properties and assembly, outlining the existing challenges. The focus of this Review is placed on the applications of Janus particles for active interfaces and surfaces. Active functional interfaces are created owing to the stabilization efficiency of Janus particles combined with their capability for interface structuring and functionalizing. Moreover, Janus particles can be employed as building blocks to fabricate active functional surfaces with controlled chemical and topographical heterogeneity. Ultimately, we will provide implications for the rational design of multifunctional materials based on Janus particles.

The Pathway to Intelligence: Using Stimuli-Responsive Materials as Building Blocks for Constructing Smart and Functional Systems

Systems that are intelligent have the ability to sense their surroundings, analyze, and respond accordingly. In nature, many biological systems are considered intelligent (e.g., humans, animals, and cells). For man-made systems, artificial intelligence is achieved by massively sophisticated electronic machines (e.g., computers and robots operated by advanced algorithms). On the other hand, freestanding materials (i.e., not tethered to a power supply) are usually passive and static. Hence, herein, the question is asked: can materials be fabricated so that they are intelligent? One promising approach is to use stimuli-responsive materials; these "smart" materials use the energy supplied by a stimulus available from the surrounding for performing a corresponding action. After decades of research, many interesting stimuli-responsive materials that can sense and perform smart functions have been developed. Classes of functions discussed include practical functions (e.g., targeting and motion), regulatory functions (e.g., self-regulation and amplification), and analytical processing functions (e.g., memory and computing). The pathway toward creating truly intelligent materials can involve incorporating a combination of these different types of functions into a single integrated system by using stimuli-responsive materials as the basic building blocks.

Magnetite nanoparticles program the assembly, response, and reconfiguration of structured emulsions

Endoskeletal droplets-non-spherical emulsion droplets that respond to external stimuli with shape change-are modified with ferromagnetic iron oxide nanoparticles to make them susceptible to magnetic fields. The resulting droplets can be manipulated using static or oscillating magnetic fields, each producing a different response. Static fields control the orientation and position of the droplets, important in driving assembly into organized structures. Oscillating fields are shown to cause magnetic hyperthermia in ferrofluid nanoparticles, leading to droplet heating and forcing droplet reconfiguration. We demonstrate the use of static and dynamic fields to affect the organization and stability of endoskeletal droplets and their assemblies, producing highly-tunable programmable colloids that adapt to changing environmental conditions.

Asymmetric surface modification of yeast cells for living self-assembly

Electrostatic embedding of yeast cells in voids with similar size has been realized, which makes the bottom surface of the cells shielded. The free top surface of the cells was further decorated to afford asymmetric surface-modified living cells. Various self-assembled architectures of the cells were then constructed by changing the ratio of different cells with or without modification.

Investigating Switchable Nanostructures in Shape Memory Process for Amphipathic Janus Nanoparticles

Janus particles (JPs) have attracted increasing attention from the communities of materials science, chemistry, physics, and biology. However, the nanoscale JPs that can switch shapes in response to an environmental stimulus is a significant challenge. In this article, we have demonstrated a simple procedure to fabricate the amphipathic Janus nanoparticles (JNPs) composed of hydrophilic body and hydrophobic lobe via using sudden negative pressure technique. Moreover, in response to temperature, the nanoparticles can recover to their initial nanosphere state by a switchable process, showing promising shape memory effect. Here, we can monitor the switchable nanostructures with hydrophilic and hydrophobic changes in the shape memory process of the JNPs by transmission electron microscope, dynamic light scattering, and water contact angle. Furthermore, we successfully compare the differences in shape deformation ratio and shape recovery ratio using the three test methods by the statistical analysis of Student's t-test for independent samples. In addition, we also develop hybrid magnetic Janus nanoparticles, changed from the amphipathic JNPs by the selective attachment of magnetic nanoparticles with hydrophobic molecules, which show new Janus nanostructure and shape memory property.

Freely Jointed Polymers Made of Droplets

An important goal of self-assembly is to achieve a preprogrammed structure with high fidelity. Here, we control the valence of DNA-functionalized emulsions to make linear and branched model polymers, or "colloidomers." The distribution of cluster sizes is consistent with a polymerization process in which the droplets achieve their prescribed valence. Conformational statistics reveal that the chains are freely jointed, so that the Kuhn length is close to one bead diameter. The end-to-end length scales with the number of bonds N as N^{ν}, where ν≈3/4, in agreement with the Flory theory in two dimensions. The chain diffusion coefficient D approximately scales as D∝N^{-ν}, as predicted by the Zimm model. Unlike molecular polymers, colloidomers can be repeatedly assembled and disassembled under temperature cycling, allowing for reconfigurable, responsive matter.

General patchy ellipsoidal particle model for the aggregation behaviors of shape- and/or surface-anisotropic building blocks

We present a general patchy ellipsoidal particle model suitable for conducting dynamics simulations of the aggregation behaviors of various shape- and/or surface-anisotropic colloids, especially patchy ellipsoids with continuously variable shape and tunable patchiness. To achieve higher computational efficiency in dynamics simulations, we employ a multi-GPU acceleration technique based on a domain decomposition algorithm. The validation and performance evaluation of this GPU-assisted model are performed by simulating several typical benchmark systems of non-patchy and patchy ellipsoids. Given the generality and efficiency of our GPU-assisted patchy ellipsoidal particle model, it will provide a highly feasible dynamics simulation framework to investigate the aggregation behaviors of anisotropic soft matter systems comprised of shape- and/or surface-anisotropic building blocks.