Metal-enhanced fluorescence of colloidal nanocrystals with nanoscale control

Synergy between plasmonic nanocavities and random lasing modes: a tool to dequench plasmon quenched fluorophore emission

Metal nanoparticles (NPs) can be employed to modify the emission level of a dye emitter by tailoring the spectral overlap of the optical gain and localized surface plasmon resonance (LSPR). In the case of plasmonic random lasers, tuning the spectral overlap by manipulating metal NPs changes the scattering properties of the system, which is crucial in random lasers (RLs). In order to overcome this drawback, the emitter gain spectrum across the LSPR is tuned by appropriately choosing various dye emitters. A system with Au nanoislands (NIs) randomly distributed on the surface of vertically aligned ZnO nanorods on a glass substrate coated with three different dye emitters has been employed to study the metal-gain interaction as a function of spectral overlap. It is observed that the photoluminescence is quenched in the presence of Au NIs for all the three dye emitters; however, the degree of quenching is found to be directly proportional to the extent of spectral overlap of the LSPR and the fluorophore emission spectrum, with the resonantly coupled systems exhibiting higher random lasing thresholds. However, a dequenching of the emission is observed under spectrally off-resonant conditions, leading to a lower threshold RL. The effect of tailoring of the metal-gain interaction on the coherent and incoherent intensity components of RL emission is studied to elucidate the contrasting results of photoluminescence and RL emission. As the optical gain shifts away from the LSPR peak, the RL emission is dominated by the coherent intensity. The speckle-like field distributions of the RL modes couple to the plasmonic nanocavities along with a reduced absorption loss for the off-resonant case, leading to an enhanced stimulated emission. Hence, a synergy between random laser modes, plasmonic nanocavities and optimum spectral overlap has been utilized as a tool to dequench the plasmon quenched fluorophore emission.

Gold Nanobipyramids for Near-Infrared Fluorescence-Enhanced Imaging and Treatment of Triple-Negative Breast Cancer

There is an imminent need for novel strategies for the diagnosis and treatment of aggressive triple-negative breast cancer (TNBC). Cell-targeted multifunctional nanomaterials hold great potential, as they can combine precise early-stage diagnosis with local therapeutic delivery to specific cell types. In this study, we used mesoporous silica (MS)-coated gold nanobipyramids (MS-AuNBPs) for fluorescence imaging in the near-infrared (NIR) biological window, along with targeted TNBC treatment. Our MS-AuNBPs, acting partly as light amplification components, allow considerable metal-enhanced fluorescence for a NIR dye conjugated to their surfaces compared to the free dye. Fluorescence analysis confirms a significant increase in the dye's modified quantum yield, indicating that MS-AuNBPs can considerably increase the brightness of low-quantum-yield NIR dyes. Meanwhile, we tested the chemotherapeutic efficacy of MS-AuNBPs in TNBC following the loading of doxorubicin within the MS pores and functionalization to target folate receptor alpha (FRα)-positive cells. We show that functionalized particles target FRα-positive cells with significant specificity and have a higher potency than free doxorubicin. Finally, we demonstrate that FRα-targeted particles induce stronger antitumor effects and prolong overall survival compared to the clinically applied non-targeted nanotherapy, Doxil. Together with their excellent biocompatibility measured in vitro, this study shows that MS-AuNBPs are promising tools to detect and treat TNBCs.

Plasmon-Enhanced Fluorescence of Single Quantum Dots Immobilized in Optically Coupled Aluminum Nanoholes

Fluorescence-based optical sensing techniques have continually been explored for single-molecule detection targeting myriad biomedical applications. Improving signal-to-noise ratio remains a prioritized effort to enable unambiguous detection at single-molecule level. Here, we report a systematic simulation-assisted optimization of plasmon-enhanced fluorescence of single quantum dots based on nanohole arrays in ultrathin aluminum films. The simulation is first calibrated by referring to the measured transmittance in nanohole arrays and subsequently used for guiding their design. With an optimized combination of nanohole diameter and depth, the variation of the square of simulated average volumetric electric field enhancement agrees excellently with that of experimental photoluminescence enhancement over a large range of nanohole periods. A maximum 5-fold photoluminescence enhancement is statistically achieved experimentally for the single quantum dots immobilized at the bottom of simulation-optimized nanoholes in comparison to those cast-deposited on bare glass substrate. Hence, boosting photoluminescence with optimized nanohole arrays holds promises for single-fluorophore-based biosensing.

Plasmonic quenching and enhancement: metal-quantum dot nanohybrids for fluorescence biosensing

Plasmonic metal nanoparticles and semiconductor quantum dots (QDs) are two of the most widely applied nanomaterials for optical biosensing and bioimaging. While their combination for fluorescence quenching via nanosurface energy transfer (NSET) or Förster resonance energy transfer (FRET) offers powerful ways of tuning and amplifying optical signals and is relatively common, metal-QD nanohybrids for plasmon-enhanced fluorescence (PEF) have been much less prevalent. A major reason is the competition between fluorescence quenching and enhancement, which poses important challenges for optimizing distances, orientations, and spectral overlap toward maximum PEF. In this feature article, we discuss the interplay of the different quenching and enhancement mechanisms (a mixed distance dependence of quenching and enhancement - "quenchancement") to better understand the obstacles that must be overcome for the development of metal-QD nanohybrid-based PEF biosensors. The different nanomaterials, their combination within various surface and solution based design concepts, and their structural and photophysical characterization are reviewed and applications toward advanced optical biosensing and bioimaging are presented along with guidelines and future perspectives for sensitive, selective, and versatile bioanalytical research and biomolecular diagnostics with metal-QD nanohybrids.

Plasmonic phenomena in molecular junctions: principles and applications

Molecular junctions are building blocks for constructing future nanoelectronic devices that enable the investigation of a broad range of electronic transport properties within nanoscale regions. Crossing both the nanoscopic and mesoscopic length scales, plasmonics lies at the intersection of the macroscopic photonics and nanoelectronics, owing to their capability of confining light to dimensions far below the diffraction limit. Research activities on plasmonic phenomena in molecular electronics started around 2010, and feedback between plasmons and molecular junctions has increased over the past years. These efforts can provide new insights into the near-field interaction and the corresponding tunability in properties, as well as resultant plasmon-based molecular devices. This Review presents the latest advancements of plasmonic resonances in molecular junctions and details the progress in plasmon excitation and plasmon coupling. We also highlight emerging experimental approaches to unravel the mechanisms behind the various types of light-matter interactions at molecular length scales, where quantum effects come into play. Finally, we discuss the potential of these plasmonic-electronic hybrid systems across various future applications, including sensing, photocatalysis, molecular trapping and active control of molecular switches.

Silica Shell Thickness-Dependent Fluorescence Properties of SiO2@Ag@SiO2@QDs Nanocomposites

Silica shell coatings, which constitute important technology for nanoparticle (NP) developments, are utilized in many applications. The silica shell's thickness greatly affects distance-dependent optical properties, such as metal-enhanced fluorescence (MEF) and fluorescence quenching in plasmonic nanocomposites. However, the precise control of silica-shell thicknesses has been mainly conducted on single metal NPs, and rarely on complex nanocomposites. In this study, silica shell-coated Ag nanoparticle-assembled silica nanoparticles (SiO₂@Ag@SiO₂), with finely controlled silica shell thicknesses (4 nm to 38 nm), were prepared, and quantum dots (QDs) were introduced onto SiO₂@Ag@SiO₂. The dominant effect between plasmonic quenching and MEF was defined depending on the thickness of the silica shell between Ag and QDs. When the distance between Ag NPs to QDs was less than ~10 nm, SiO₂@Ag@SiO₂@QDs showed weaker fluorescence intensities than SiO₂@QD (without metal) due to the quenching effect. On the other hand, when the distance between Ag NPs to QDs was from 10 nm to 14 nm, the fluorescence intensity of SiO₂@Ag@SiO₂@QD was stronger than SiO₂@QDs due to MEF. The results provide background knowledge for controlling the thickness of silica shells in metal-containing nanocomposites and facilitate the development of potential applications utilizing the optimal plasmonic phenomenon.

A Dual Catalyst Strategy for Controlling Aluminum Nanocrystal Growth

The synthesis of Al nanocrystals (Al NCs) is a rapidly expanding field, but there are few strategies for size and morphology control. Here we introduce a dual catalyst approach for the synthesis of Al NCs to control both NC size and shape. By using one catalyst that nucleates growth more rapidly than a second catalyst whose ligands affect NC morphology during growth, one can obtain both size and shape control of the resulting Al NCs. The combination of the two catalysts (1) titanium isopropoxide (TIP), for rapid nucleation, and (2) Tebbe's reagent, for specific facet-promoting growth, yields {100}-faceted Al NCs with tunable diameters between 35 and 65 nm. This dual-catalyst strategy could dramatically expand the possible outcomes for Al NC growth, opening the door to new controlled morphologies and a deeper understanding of earth-abundant plasmonic nanocrystal synthesis.

Metal-enhanced fluorescence of graphene oxide sheets

Graphene oxide (GO) is an excellent chemical tunable optical platform for imaging and sensing. The photoluminescence (PL) quantum yield of GO is relatively low, which limited the application of the intrinsic and tunable fluorescence from GO. Here, we report the first case of metal-enhanced fluorescence (MEF) of GO. A significant enhancement (~10-fold) in fluorescence intensity is observed from GO on the Ag substrate as compared to that on the glass. FL, Raman, and SEM images are used to investigate the MEF behavior and are coincident with each other. The influence of the metal particle size of Ag substrate is investigated. The fluorescence is also found to be responsive when adding different metal ions into GO solution. GO contacting directly with metal substrate exhibits strong MEF without quenching, which makes it possible to use GO sheets for three-dimension optical imaging and sensing.

Dual-Mode Circularly Polarized Light Emission and Metal-Enhanced Fluorescence Realized by the Luminophore-Chiral Cellulose Nanocrystal Interfaces

Circularly polarized (CP) light has attracted wide attention for its great potential in broad applications. However, it remains a challenge to generate left-handed and right-handed circularly polarized (LCP and RCP) light from cellulose nanocrystal (CNC)-based materials only with an intrinsic left-handed chiral structure, owing to the pattern of CP light emission primarily based on the chirality of materials. Herein, a separation structure of luminophore layers and chiral CNCs was provided to achieve dual-mode CP light emission by building a luminophore-chiral CNC interface. By directly exciting the back and front of two-layer films, LCP and RCP light could be easily emitted without any assisting means and specific setting angles. In addition, owing to the formation of the luminophore-chiral CNC interface, metal-enhanced fluorescence (MEF) was achieved to offset the brightness loss caused by circular polarization. By incorporating gold triangular nanoprisms in CNC chiral layers, the fluorescence enhancement of the ensemble was as high as 6.5-fold. The decisive role of the luminophore-chiral CNC interface in enhancing luminescence and dual-mode CP light emission was carefully investigated by contrasting the systems with and without luminophore-chiral CNC interfaces in this study. We believe that this dual-mode CP light emission film with MEF enables a promising approach to extending the application of CP light materials.

Fluorescence turn-on immunosensing of HE4 biomarker and ovarian cancer cells based on target-triggered metal-enhanced fluorescence of carbon dots

Rapid and sensitive detection of tumor biomarkers and cancer cells is of crucial importance for the early diagnosis and prognosis prediction of cancer. The present report describes a target-induced fluorescence enhancement immunosensor that utilizes the optical property of carbon dots (CDs) and the metal-enhanced fluorescence effect (MEF) property of silver nanoparticles (AgNPs) for the sensitive detection of the cancer biomarker human epididymis protein 4 (HE4) and ovarian cancer cells. Nitrogen and sulfur co-doped CDs with a quantum yield of 85.6% were prepared and served as the fluorophore in MEF. The HE4 antibody (Ab) specific to the HE4 antigen was linked covalently to the surface of the synthesized CDs as the capture. The HE4 Ab-conjugated AgNPs (AgNPs-Ab) were prepared and utilized as signal amplification elements. In the presence of the target HE4, composite sandwich structures were formed between the labeled CDs-Ab and AgNPs-Ab, which brought the CDs and AgNPs into proximity, resulting in the fluorescence of CDs enhancement owing to MEF. The intensity of fluorescence enhancement was positively correlated with the HE4 concentration in the clinically important range of 0.01-200 nM with a limit detection of 2.3 pM. Moreover, the immunosensor was also successfully applied to specific fluorescence labeling and quantitative determination of HE4-positive ovarian cancer cells. The proposed target-triggered MEF sensor platform demonstrated high sensitivity, excellent anti-interference ability, along with successful validation in complex biological matrices, providing a new approach for HE4 detection in early diagnosis and therapeutic monitoring.

Distance-Dependent Fluorescence Resonance Energy Transfer Enhancement on Nanoporous Gold

Fluorescence resonance energy transfers (FRET) between cyan fluorescent protein (CFP) and yellow fluorescent protein (YFP) on nanoporous gold (NPG) are systematically investigated by controlling the distance between NPG and fluorescent proteins with polyelectrolyte multilayers. The FRET between CFP and YFP is significantly enhanced by NPG, and the maximum enhancement is related to both ligament size of NPG and the distance between NPG and proteins. With the optimized distance, 18-fold FRET enhancement was obtained on NPG compared to that on glass, and the conversion efficiency is about 90%. The potential to tune the characteristic energy transfer distance has implications for applications in nanophotonic devices and provides a possible way to design sensors and light energy converters.

Gold Nanorod Size-Dependent Fluorescence Enhancement for Ultrasensitive Fluoroimmunoassays

Plasmon-enhanced fluorescence (PEF) is a simple and highly effective approach for improving the signal-to-noise ratio and sensitivity of various fluorescence-based bioanalytical techniques. Here, we show that the fluorescence enhancement efficacy of gold nanorods (AuNRs), which are widely employed for PEF, is highly dependent on their absolute dimensions (i.e., length and diameter). Notably, an increase in the dimensions (length × diameter) of the AuNRs from 46 × 14 to 120 × 38 nm² while holding the aspect ratio constant leads to nearly 300% improvement in fluorescence enhancement efficiency. Further increase in the AuNR size leads to a decrease of the fluorescence enhancement efficiency. Through finite-difference time-domain (FDTD) simulation, we reveal that the size-dependent fluorescence enhancement efficiency of AuNR stems from the size-dependent electromagnetic field around the plasmonic nanostructures. AuNRs with optimal dimensions resulted in a nearly 120-fold enhancement in the ensemble fluorescence emission from molecular fluorophores bound to the surface. These plasmonic nanostructures with optimal dimensions also resulted in a nearly 30-fold improvement in the limit of detection of human interleukin-6 (IL-6) compared to AuNRs with smaller size, which are routinely employed in PEF.

DNA-Engineerable Ultraflat-Faceted Core-Shell Nanocuboids with Strong, Quantitative Plasmon-Enhanced Fluorescence Signals for Sensitive, Reliable MicroRNA Detection

There has been enormous interest in understanding and utilizing plasmon-enhanced fluorescence (PEF) with metal nanostructures, but maximizing the enhancement in a reproducible, quantitative manner while reliably controlling the distance between dyes and metal particle surface for practical applications is highly challenging. Here, we designed and synthesized fluorescence-amplified nanocuboids (FANCs) with highly enhanced and controlled PEF signals, and fluorescent silica shell-coated FANCs (FS-FANCs) were then formed to fixate the dye position and increase particle stability and fluorescence signal intensity for biosensing applications. By uniformly modifying fluorescently labeled DNA on Au nanorods and forming ultraflat Ag shells on them, we were able to reliably control the distance between fluorophores and Ag surface and obtained an ∼186 fluorescence enhancement factor with these FANCs. Importantly, FS-FANCs were utilized as fluorescent nanoparticle tags for microarray-based miRNA detection, and we achieved >10³-fold higher sensitivity than commercially available chemical fluorophores with 100 aM to 1 pM dynamic range.

Fabrication of Ag nanorods on micropost array for a metal-enhanced fluorescence substrate with a high signal-to-background ratio

Selective fabrication of metallic nanostructures at the spotting area is required to increase the signal-to-background noise ratio (SBR) of the metal-enhanced fluorescence (MEF) substrate. As a simple and cost-effective fabrication method for MEF substrate with high SBR, a glancing angle deposition (GLAD) process of Ag material on the UV-imprinted micropost array (50 μm in height, 300 μm in diameter, and 600 μm in pitch) was proposed to selectively fabricate Ag nanorods on the top of micropost structure (spotting area). Ag nanorod formation at the bottom of the micropost decreased as the deposition angle in Ag GLAD increased. A deposition angle of 89° and deposition thickness of 500 nm were selected as the optimum GLAD conditions to maximize the SBR. The optimum Ag nanorods on micropost array (AgNMPA) MEF substrate provided 71-fold fluorescence signal enhancement and 25-times higher SBR than the bare glass substrate. It also provided 7-times higher SBR than the Ag nanorod MEF substrate, which has a similar Ag nanorod structure but is not selectively formed. The detection limit of AgNMPA was 16- and 4-times lower than that of the amine-functionalized glass substrate and commercial epoxy slide, respectively. Although the fluorescence signal of AgNMPA was similar to that of Ag nanorod substrate, the detection limit was 2-times lower because of the low signal standard deviation caused by the low background noise and clear spot shape.

Exciton-Photon Interactions in Semiconductor Nanocrystals: Radiative Transitions, Non-Radiative Processes and Environment Effects

In this review, we discuss several fundamental processes taking place in semiconductor nanocrystals (quantum dots (QDs)) when their electron subsystem interacts with electromagnetic (EM) radiation. The physical phenomena of light emission and EM energy transfer from a QD exciton to other electronic systems such as neighbouring nanocrystals and polarisable 3D (semi-infinite dielectric or metal) and 2D (graphene) materials are considered. In particular, emission decay and FRET rates near a plane interface between two dielectrics or a dielectric and a metal are discussed and their dependence upon relevant parameters is demonstrated. The cases of direct (II–VI) and indirect (silicon) band gap semiconductors are compared. We cover the relevant non-radiative mechanisms such as the Auger process, electron capture on dangling bonds and interaction with phonons. Some further effects, such as multiple exciton generation, are also discussed. The emphasis is on explaining the underlying physics and illustrating it with calculated and experimental results in a comprehensive, tutorial manner.

A straightforward and sensitive “ON–OFF” fluorescence immunoassay based on silicon-assisted surface enhanced fluorescence

A straightforward immunoassay based on silicon-assisted surface enhanced fluorescence (SEF) has been demonstrated using a silicon-based fluorescent immune substrate and silver-antibody nanoconjugate (SANC). The P-doped, (100) oriented silicon wafers are used for both fluorophore attachment and antigen immobilization. The silicon substrate offers a very low blank signal in the “OFF” state, due to its fluorescence quenching effect. In the detection process, the capture of the SANCs by the surface-immobilized antigen leads to an effectively enhanced fluorescence to produce an “ON” state. The analytical performance of the presented scheme has been investigated and a limit of detection of 31.4 pg mL⁻¹ has been obtained. Besides the broadened application range compared with the conventional immunoassays, the presented scheme is straightforward, cost effective and sensitive, and is hence expected to find widespread applications in immunoassays as well as other fluorescence-based assays.

A straightforward immunoassay based on silicon-assisted surface enhanced fluorescence (SEF) has been demonstrated using a silicon-based fluorescent immune substrate and silver-antibody nanoconjugate (SANC).

Ultrasensitive antibody-aptamer plasmonic biosensor for malaria biomarker detection in whole blood

Development of plasmonic biosensors combining reliability and ease of use is still a challenge. Gold nanoparticle arrays made by block copolymer micelle nanolithography (BCMN) stand out for their scalability, cost-effectiveness and tunable plasmonic properties, making them ideal substrates for fluorescence enhancement. Here, we describe a plasmon-enhanced fluorescence immunosensor for the specific and ultrasensitive detection of Plasmodium falciparum lactate dehydrogenase (PfLDH)—a malaria marker—in whole blood. Analyte recognition is realized by oriented antibodies immobilized in a close-packed configuration via the photochemical immobilization technique (PIT), with a top bioreceptor of nucleic acid aptamers recognizing a different surface of PfLDH in a sandwich conformation. The combination of BCMN and PIT enabled maximum control over the nanoparticle size and lattice constant as well as the distance of the fluorophore from the sensing surface. The device achieved a limit of detection smaller than 1 pg/mL (<30 fM) with very high specificity without any sample pretreatment. This limit of detection is several orders of magnitude lower than that found in malaria rapid diagnostic tests or even commercial ELISA kits. Thanks to its overall dimensions, ease of use and high-throughput analysis, the device can be used as a substrate in automated multi-well plate readers and improve the efficiency of conventional fluorescence immunoassays.

Reliable plasmonic biosensors with high throughput and ease of use are highly sought after. Here, the authors report a plasmon-enhanced fluorescence antibody-aptamer biosensor based on a gold nanoparticle array, and demonstrate its use for effective specific detection of a malaria marker, at femtomolar level, in whole blood.

Regulation of light-harvesting antenna based on silver ion-enhanced emission of dye-doped coordination polymer nanoparticles

The design and construction of artificial light-harvesting systems for solar energy conversion to chemical energy has been an active research field. A variety of molecules and materials have been used to mimic the function of the light-harvesting antenna. However, the improvement or regulation of the antenna effect of the existing artificial light-harvesting systems is less explored. Coordination polymers have aroused extensive concern due to their applications in light-harvesting and energy conversion. Herein, it is found that silver ion can dramatically enhance the emission of dye encapsulated in the coordination polymer nanoparticles (CPNs). The mechanism of Ag⁺-induced fluorescence enhancement is elucidated. Taking advantage of the effect of Ag⁺ ions, the regulation of CPN-based light-harvesting system by Ag⁺ is achieved for the first time. The antenna effect could be up to 2.3 times the original value by adding Ag⁺ ions. The present work provides a new approach to regulate the antenna effect of the light-harvesting system with the advantages of convenience, rapidity, low cost, and flexibility.

Recent Developments in Plasmonic Nanostructures for Metal Enhanced Fluorescence-Based Biosensing

Metal-enhanced fluorescence (MEF) is a unique phenomenon of surface plasmons, where light interacts with the metallic nanostructures and produces electromagnetic fields to enhance the sensitivity of fluorescence-based detection. In particular, this enhancement in sensing capacity is of importance to many research areas, including medical diagnostics, forensic science, and biotechnology. The article covers the basic mechanism of MEF and recent developments in plasmonic nanostructures fabrication for efficient fluorescence signal enhancement that are critically reviewed. The implications of current fluorescence-based technologies for biosensors are summarized, which are in practice to detect different analytes relevant to food control, medical diagnostics, and forensic science. Furthermore, characteristics of existing fabrication methods have been compared on the basis of their resolution, design flexibility, and throughput. The future projections emphasize exploring the potential of non-conventional materials and hybrid fabrication techniques to further enhance the sensitivity of MEF-based biosensors.

Metal-enhancement study of dual functional photosensitizers with aggregation-induced emission and singlet oxygen generation

Photosensitizers with aggregation-induced emission (AIE-PS) are attractive for image-guided photodynamic therapy due to their dual functional role in generating singlet oxygen and producing high fluorescent signal in the aggregated state. However, their brightness and treatment efficiency maybe limited in current practice. Herein we report the first systematic investigation on the metal-enhanced fluorescence (MEF) and singlet oxygen generation (ME-SOG) ability of our newly synthesized AIE-photosensitizers. The Ag@AIE-PS of varied sizes were prepared via layer-by-layer assembly with controlled distance between silver nanoparticles (AgNPs) and AIE-PS. A maximum of 6-fold enhancement in fluorescence and 2-fold increment in SOG were observed for the 85nmAg@AIE-PS. Comprehensive characterization and simulation were conducted to unravel the plasmon-enhancement mechanisms of Ag@AIE-PS. Results show that MEF of AIE-PS is determined by the enhanced electric field around AgNPs, while ME-SOG is dictated by the scattering efficiency of the metal core, where bigger AgNPs would result in larger enhancement factor. Furthermore, the optimum distance between AgNPs and AIE-PS to achieve maximum SOG enhancement is shorter than that required for the highest MEF. The correlation of MEF and ME-SOG found in this study is useful for designing new a generation of AIE-photosensitizers with high brightness and treatment efficiency towards practical theranostic application in the future.

Simulating Plasmon Resonances of Gold Nanoparticles with Bipyramidal Shapes by Boundary Element Methods

Computational modeling and accurate simulations of localized surface plasmon resonance (LSPR) absorption properties are reported for gold nanobipyramids (GNBs), a class of metal nanoparticle that features highly tunable, geometry-dependent optical properties. GNB bicone models with spherical tips performed best in reproducing experimental LSPR spectra while the comparison with other geometrical models provided a fundamental understanding of base shapes and tip effects on the optical properties of GNBs. Our results demonstrated the importance of averaging all geometrical parameters determined from transmission electron microscopy images to build representative models of GNBs. By assessing the performances of LSPR absorption spectra simulations based on a quasi-static approximation, we provided an applicability range of this approach as a function of the nanoparticle size, paving the way to the theoretical study of the coupling between molecular electron densities and metal nanoparticles in GNB-based nanohybrid systems, with potential applications in the design of nanomaterials for bioimaging, optics and photocatalysis.

Experimental study of the size-dependent photoluminescence emission of CBD-grown PbSe nanocrystals on glass

In this work, we study the size-dependent properties of Photoluminescence (PL) emissions of PbSe Nanocrystals (NCs) grown by Chemical Bath Deposition (CBD) method. In previous studies, PL emissions have been tuned by CBD-grown PbSe, and the growth mechanism was dependent on crystalized substrates such as GaAs. In this research, however, PL emissions are controlled over the midinfrared (MIR) range, through PbSe NCs, which are deposited on glass as an amorphous material. This study proposes an alternative approach to control PL emissions, which provides us with more freedom to fabricate low-cost MIR light sources as crucial components in remote sensing and gas analysis. Moreover, in this study, the advantage of the post-thermal method to control the NCs size, compared to the growth temperature, is shown.

Refractive index mediated plasmon hybridization in an array of aluminium nanoparticles

The arrangement of plasmonic nanoparticles in a non-symmetrical environment can feature far-field and/or near-field interactions depending on the distance between the objects. In this work, we study the hybridization of three intrinsic plasmonic modes (dipolar, quadrupolar and hexapolar modes) sustained by one elliptical aluminium nanocylinder, as well as behavior of the hybridized modes when the nanoparticles are organized in arrays or when the refractive index of the surrounding medium is changed. The position and the intensity of these hybridized modes were shown to be affected by the near-field and far-field interactions between the nanoparticles. In this work, two hybridized modes were tuned in the UV spectral range to spectrally coincide with the intrinsic interband excitation and emission bands of ZnO nanocrystals. The refractive index of the ZnO nanocrystal layer influences the positions of the plasmonic modes and increases the role of the superstrate medium, which in turn results in the appearance of two separate modes in the small spectral region. Hence, the enhancement of ZnO nanocrystal photoluminescence benefits from the simultaneous excitation and emission enhancements.

Principle and Applications of the Coupling of Surface Plasmons and Excitons

Surface plasmons have been attracting increasing attention and have been studied extensively in recent decades because of their half-light and half-material polarized properties. On the one hand, the tightly confined surface plasmonic mode may reduce the size of integrated optical devices beyond the diffraction limit; on the other hand, it provides an approach toward enhancement of the interactions between light and matter. In recent experiments, researchers have realized promising applications for surface plasmons in quantum information processing, ultra-low-power lasers, and micro-nano processing devices by using plasmonic structures, which have demonstrated their superiority over traditional optics structures. In this paper, we introduce the theoretical principle of surface plasmons and review the research work related to the interactions between plasmons and excitons. Some perspectives with regard to the future development of plasmonic coupling are also outlined.

Excimer Formation of Aryl Iodides Chemisorbed on Gold Nanoparticles for the Significant Enhancement of Photoluminescence

The photoluminescence properties of aryl iodides chemisorbed on gold nanoparticles were examined. Chemisorption of a series of aryl iodides onto poly(N-vinylpyrrolidone)-protected Au nanoparticles (Au:PVP) in solution resulted in highly enhanced luminescence. Kinetic studies revealed that the photoluminescence is derived from the excimer formation of aryl iodides on Au:PVP, and the process is significantly faster than intersystem crossing by the heavy atom.

A Self-Assembled Plasmonic Substrate for Enhanced Fluorescence Resonance Energy Transfer

Fluorescence resonance energy transfer (FRET) has found widespread uses in biosensing, molecular imaging, and light harvesting. Plasmonic metal nanostructures offer the possibility of engineering photonic environment of specific fluorophores to enhance the FRET efficiency. However, the potential of plasmonic nanostructures to enable tailored FRET enhancement on planar substrates remains largely unrealized, which are of considerable interest for high-performance on-surface bioassays and photovoltaics. The main challenge lies in the necessitated concurrent control over the spectral properties of plasmonic substrates to match that of fluorophores and the fluorophore-substrate spacing. Here, a self-assembled plasmonic substrate based on polydopamine (PDA)-coated plasmonic nanocrystals is developed to effectively address this challenge. The PDA coating not only drives interfacial self-assembly of the nanocrystals to form closely packed arrays with customized optical properties, but also can serve as a tailored nanoscale spacer between the fluorophores and plasmonic nanocrystals, which collectively lead to optimized fluorescence enhancement. The biocompatible plasmonic substrate that allows convenient bioconjugation imparted by PDA has afforded improved FRET efficiency in DNA microarray assay and FRET imaging of live cells. It is envisioned that the self-assembled plasmonic substrates can be readily integrated into fluorescence-based platforms for diverse biomedical and photoconversion applications.

Multicomponent Plasmonic Nanoparticles: From Heterostructured Nanoparticles to Colloidal Composite Nanostructures

Plasmonic nanostructures possessing unique and versatile optoelectronic properties have been vastly investigated over the past decade. However, the full potential of plasmonic nanostructure has not yet been fully exploited, particularly with single-component homogeneous structures with monotonic properties, and the addition of new components for making multicomponent nanoparticles may lead to new-yet-unexpected or improved properties. Here we define the term "multi-component nanoparticles" as hybrid structures composed of two or more condensed nanoscale domains with distinctive material compositions, shapes, or sizes. We reviewed and discussed the designing principles and synthetic strategies to efficiently combine multiple components to form hybrid nanoparticles with a new or improved plasmonic functionality. In particular, it has been quite challenging to precisely synthesize widely diverse multicomponent plasmonic structures, limiting realization of the full potential of plasmonic heterostructures. To address this challenge, several synthetic approaches have been reported to form a variety of different multicomponent plasmonic nanoparticles, mainly based on heterogeneous nucleation, atomic replacements, adsorption on supports, and biomolecule-mediated assemblies. In addition, the unique and synergistic features of multicomponent plasmonic nanoparticles, such as combination of pristine material properties, finely tuned plasmon resonance and coupling, enhanced light-matter interactions, geometry-induced polarization, and plasmon-induced energy and charge transfer across the heterointerface, were reported. In this review, we comprehensively summarize the latest advances on state-of-art synthetic strategies, unique properties, and promising applications of multicomponent plasmonic nanoparticles. These plasmonic nanoparticles including heterostructured nanoparticles and composite nanostructures are prepared by direct synthesis and physical force- or biomolecule-mediated assembly, which hold tremendous potential for plasmon-mediated energy transfer, magnetic plasmonics, metamolecules, and nanobiotechnology.

Emission Enhancement of Fluorescent Molecules by Antireflective Arrays

Traditional fluorescence enhancement based on a match of the maximum excitation or emission of fluorescence molecule with the spectra of the nanostructure can hardly enhance blue and red fluorescent molecules. Here, an enhanced method which is a new strategy based on the antireflective array has been developed to enhance the emission of blue and red fluorescent molecules. The fluorescence emission is enhanced by increasing the absorption at excitation wavelengths of the fluorescent molecules and reducing the fluorescent energy dissipation with an antireflective array. By introducing the antireflective arrays, the emission enhancement of blue and red fluorescent molecules is, respectively, up to 14 and 18 fold. It is a universal and effective strategy for enhancing fluorescence emission, which could be applied to enhance the intensity of organic LED and imaging.

DNA-Templated Fluorescent Nanoclusters for Metal Ions Detection

DNA-templated fluorescent nanoclusters (NCs) have attracted increasing research interest on account of their prominent features, such as DNA sequence-dependent fluorescence, easy functionalization, wide availability, water solubility, and excellent biocompatibility. Coupling DNA templates with complementary DNA, aptamers, G-quadruplex, and so on has generated a large number of sensors. Additionally, the preparation and applications of DNA-templated fluorescent NCs in these sensing have been widely studied. This review firstly focuses on the properties of DNA-templated fluorescent NCs, and the synthesis of DNA-templated fluorescent NCs with different metals is then discussed. In the third part, we mainly introduce the applications of DNA-templated fluorescent NCs for sensing metal ions. At last, we further discuss the future perspectives of DNA-templated fluorescent NCs in the synthesis and sensing metal ions in the environmental and biological fields.

Atomically Thin Boron Nitride as an Ideal Spacer for Metal-Enhanced Fluorescence

Metal-enhanced fluorescence (MEF) considerably enhances the luminescence for various applications, but its performance largely depends on the dielectric spacer between the fluorophore and plasmonic system. It is still challenging to produce a defect-free spacer having an optimized thickness with a sub-nanometer accuracy that enables reusability without affecting the enhancement. In this study, we demonstrate the use of atomically thin hexagonal boron nitride (BN) as an ideal MEF spacer owing to its multifold advantages over the traditional dielectric thin films. With rhodamine 6G as a representative fluorophore, it largely improves the enhancement factor (up to ∼95 ± 5), sensitivity (10^-8 M), reproducibility, and reusability (∼90% of the plasmonic activity is retained after 30 cycles of heating at 350 °C in air) of MEF. This can be attributed to its two-dimensional structure, thickness control at the atomic level, defect-free quality, high affinities to aromatic fluorophores, good thermal stability, and excellent impermeability. The atomically thin BN spacers could increase the use of MEF in different fields and industries.

Tunable Fluorescence from Dye-Modified DNA-Assembled Plasmonic Nanocube Arrays

Colloidal crystal engineering with DNA on template-confined surfaces is used to prepare arrays of nanocube-based plasmonic antennas and deliberately place dyes with sub-nm precision into their hotspots, on the DNA bonds that confine the cubes to the underlying gold substrate. This combined top-down and bottom-up approach provides independent control over both the plasmonic gap and photonic lattice modes of the surface-confined particle assemblies and allows for the tuning of the interactions between the excited dyes and plasmonically active antennas. Furthermore, the gap mode of the antennas can be modified in situ by utilizing the solvent-dependent structure of the DNA bonds. This is studied by placing two dyes, with different emission wavelengths, under the nanocubes and recording their solvent-dependent emission. It is shown that dye emission not only depends upon the in-plane structure of the antennas but also the size of the gap, which is regulated with solvent. Importantly, this approach allows for the systematic understanding of the relationship between nanoscale architecture and plasmonically coupled dye emission, and points toward the use of colloidal crystal engineering with DNA to create stimuli responsive architectures, which can find use in chemical sensing and tunable light sources.

Oriented Gold Nanorod Arrays: Self-Assembly and Optoelectronic Applications

Self-assembly of anisotropic plasmonic nanomaterials into ordered superstructures has become popular in nanoscience because of their unique anisotropic optical and electronic properties. Gold nanorods (GNRs) are a well-defined functional building block for fabrication of these superstructures. They possess important anisotropic plasmonic characteristics that result from strong local electric field and are responsive to visible and near-IR light. There are recent examples of assembling the GNRs into ordered arrays or superstructures through processes such as solvent evaporation and interfacial assembly. In this Minireview, recent progress in the development of the self-assembled GNR arrays is described, with focus on the formation of oriented GNR arrays on substrates. Key driving forces are discussed, and different strategies and self-assembly processes of forming oriented GNR arrays are presented. The applications of the oriented GNR arrays in optoelectronic devices are also overviewed, especially surface enhanced Raman scattering (SERS).

Amorphous Ag2S Micro-rods-Enhanced Fluorescence on Liquid Crystals: Cation-π Interaction-Triggered Aggregation-Induced Emission Effect

Aggregation-induced emission (AIE) system has long been regarded as a promising substitute to overcome the aggregation-caused quenching in traditional luminescent liquid crystals, which could further enhance its efficiency and application. However, due to the intrinsic weak interaction between hybrid components, heterogeneous inorganic materials-induced AIE process was rarely reported. In this study, trace amounts of amorphous Ag2S microrods and an AIE-active liquid crystalline compound tetraphenylethylene-propylbenzene (TPE-PPE) were proposed to construct additional intense interaction to trigger AIE effect. The enhanced concentration of unsaturated Ag ions and excess positive charge on Ag2S surface promote a cation-π interaction with TPE-PPE, leading to a 36-fold increase in fluorescence, which is predominately high in luminescent liquid crystal system. To the best of our knowledge, this is the first report of the AIE process activated by cation-π interaction. This novel approach would provide guidance to fabricate high-luminescence meso phases for future luminescent display device.

Plasmon-Enhanced Blue-Light Emission of Stable Perovskite Quantum Dot Membranes

A series of stable and color-tunable MAPbBr_3-xCl_x quantum dot membranes were fabricated via a cost-efficient high-throughput technology. MAPbBr_3-xCl_x quantum dots grown in-situ in polyvinylidene fluoride electrospun nanofibers exhibit extraordinary stability. As polyvinylidene fluoride can prevent the molecular group MA⁺ from aggregating, MAPbBr_3-xCl_x quantum dots are several nanometers and monodisperse in polyvinylidene fluoride fiber. As-prepared MAPbBr_3-xCl_x quantum dot membranes exhibit the variable luminous color by controlling the Cl^- content of MAPbBr_3-xCl_x quantum dots. To improve blue-light emission efficiency, we successfully introduced Ag nanoparticle nanofibers into MAPbBr_1.2Cl_1.8 quantum dot membranes via layer-by-layer electrospinning and obtained ~4.8 folds fluorescence enhancement for one unit. Furthermore, the originality explanation for the fluorescence enhancement of MAPbBr_3-xCl_x quantum dots is proposed based on simulating optical field distribution of the research system.

Plasmonics with Metallic Nanowires

The purpose of this review is to introduce and present the concept of metallic nanowires as building-blocks of plasmonically active structures. In addition to concise description of both the basic physical properties associated with the electron oscillations as well as energy propagation in metallic nanostructures, and methods of fabrication of metallic nanowires, we will demonstrate several key ideas that involve interactions between plasmon excitations and electronic states in surrounding molecules or other emitters. Particular emphasis will be placed on the effects that involve not only plasmonic enhancement or quenching of fluorescence, but also propagation of energy on lengths that exceed the wavelength of light.

Fabrication of Metal Nanostructures on DNA Templates

Metal nanoarchitectures fabrication based on DNA assembly has attracted a good deal of attention. DNA nanotechnology enables precise organization of nanoscale objects with extraordinary structural programmability. The spatial addressability of DNA nanostructures and sequence-dependent recognition allow functional elements to be precisely positioned; thus, novel functional materials that are difficult to produce using conventional methods could be fabricated. This review focuses on the recent development of the fabrication strategies toward manipulating the shape and morphology of metal nanoparticles and nanoassemblies based on the rational design of DNA structures. DNA-mediated metallization, including DNA-templated conductive nanowire fabrication and sequence-selective metal deposition, etc., is briefly introduced. The modifications of metal nanoparticles (NPs) with DNA and subsequent construction of heterogeneous metal nanoarchitectures are highlighted. Importantly, DNA-assembled dynamic metal nanostructures that are responsive to different stimuli are also discussed as they allow the design of smart and dynamic materials. Meanwhile, the prospects and challenges of these shape-and morphology-controlled strategies are summarized.

A smartphone fluorescence imaging-based mobile biosensing system integrated with a passive fluidic control cartridge for minimal user intervention and high accuracy

A key challenge for realizing mobile device-based on-the-spot environmental biodetection is that a biosensor integrated with a fluid handling sensor cartridge must have acceptable accuracy comparable to that of conventional standard analytical methods. Furthermore, the user interface must be easy to operate, technologically plausible, and concise. Herein, we introduced an advanced smartphone imaging-based fluorescence microscope designed for Hg2+ monitoring by utilizing a biosensor cartridge that reduced user intervention via time-sequenced passive fluid handling. The cartridge also employed a metal-nanostructured plastic substrate for complementing the fluorescence signal output; this helped the realization of high-accuracy detection, in which a ratiometric dual-wavelength detection method was applied. Using 30 samples of Hg2+-spiked wastewater, we showed that our device, which has a detection limit of ∼1 pM, can perform analytical assays accurately. The detection results from our method were in good linearity and agreement with those of conventional standard methods. We conclude that the integration of a simple-to-use biosensor cartridge, fluorescence signal-enhancing substrate, dual-wavelength detection, and quantitative image data processing on a smartphone has great potential to make any population accessible to small-molecule detection, which has been performed in centralized laboratories for environmental monitoring.

Surface Coupling of Octaethylporphyrin with Silicon Tetrachloride

The surface assembly of 2,3,7,8,12,13,17,18-octaethylporphyrin (OEP) using silicon tetrachloride as a coupling agent was investigated using atomic force microscopy (AFM). Nanopatterned films of Si-OEP were prepared by protocols of colloidal lithography to evaluate the morphology, thickness, and molecular orientation for samples prepared on Si(111). The natural self-stacking of porphyrins can pose a challenge for molecular patterning. When making films on surfaces, porphyrins will self-associate to form co-planar configurations of random stacks of molecules. There is a tendency for the flat molecules to orient spontaneously in a side-on arrangement that is mediated by physisorption to the substrate as well as by π-π interactions between macrocycles to form a layered arrangement of packed molecules, analogous to a stack of coins. When silicon tetrachloride is introduced to the reaction vessel, the coupling between the surface and porphyrins is mediated through covalent Si-O bonding. For these studies, surface structures of Si-OEP were formed that are connected with a Si-O-Si motif to a silicon atom coordinated to the center of the porphyrin macrocycles. Protocols of colloidal lithography were used as a tool to prepare surface structures and films of Si-OEP to facilitate surface characterizations. Conceptually, by arranging the macrocycles of porphyrins with defined orientation, local AFM surface measurements can be enabled to help address mechanistic questions about how molecules self-assemble and bind to substrates.

Multimodal Biosensing on Paper-Based Platform Fabricated by Plasmonic Calligraphy Using Gold Nanobypiramids Ink

In this work, we design new plasmonic paper-based nanoplatforms with interesting capabilities in terms of sensitivity, efficiency, and reproducibility for promoting multimodal biodetection via Localized Surface Plasmon Resonance (LSPR), Surface Enhanced Raman Spectroscopy (SERS), and Metal Enhanced Fluorescence (MEF). To succeed, we exploit the unique optical properties of gold nanobipyramids (AuBPs) deposited onto the cellulose fibers via plasmonic calligraphy using a commercial pen. The first step of the biosensing protocol was to precisely graft the previously chemically-formed p-aminothiophenol@Biotin system, as active recognition element for target streptavidin detection, onto the plasmonic nanoplatform. The specific capture of the target protein was successfully demonstrated using three complementary sensing techniques. As a result, while the LSPR based sensing capabilities of the nanoplatform were proved by successive 13-18 nm red shifts of the longitudinal LSPR associated with the change of the surface RI after each step. By employing the ultrasensitive SERS technique, we were able to indirectly confirm the molecular identification of the biotin-streptavidin interaction due to the protein fingerprint bands assigned to amide I, amide III, and Trp vibrations. Additionally, the formed biotin-streptavidin complex acted as a spacer to ensure an optimal distance between the AuBP surface and the Alexa 680 fluorophore for achieving a 2-fold fluorescence emission enhancement of streptavidin@Alexa 680 on the biotinylated nanoplatform compared to the same complex on bare paper (near the plasmonic lines), implementing thus a novel MEF sensing nanoplatform. Finally, by integrating multiple LSPR, SERS, and MEF nanosensors with multiplex capability into a single flexible and portable plasmonic nanoplatform, we could overcome important limits in the field of portable point-of-care diagnostics.

Enhancement of Biexciton Emission Due to Long-Range Interaction of Single Quantum Dots and Gold Nanorods in a Thin-Film Hybrid Nanostructure

Semiconductor quantum dots (QDs) are known for their ability to exhibit multiphoton emission caused by recombination of biexcitons (BX). However, the quantum yield (QY) of BX emission is low due to the fast Auger process. Plasmonic nanoparticles (PNPs) provide an attractive opportunity to accelerate BX radiative recombination. Here, we demonstrate the PNPs induced distance-controlled enhancement of BX emission of single QDs. Studying the same single QD before and after its integration with the PNPs, we observed a plasmon-mediated increase in the QY of BX emission. Remarkably, the enhancement of BX emission remains pronounced even at distances of 170 nm. We attribute this effect to efficient coupling, which results in the trade-off between resonance energy transfer from QD to gold nanorods and the Purcell effect at small QD-PNP separations and the predominant influence of the Purcell effect at longer distances. Our findings constitute a reliable approach to managing the efficiency of multiexciton emission over a wide span of distances, thus paving the way for new applications.

Deep ultraviolet tip-enhanced fluorescence

Theoretical calculations were performed for the deep ultraviolet (DUV) tip-enhanced fluorescence (TEF) using Al@Al₂O₃ core-shell tips. Fluorescence enhancement, spatial resolution and surface plasmon coupled emission (SPCE) of DUV-TEF were quantitatively studied by finite-difference time-domain (FDTD) method. FDTD results demonstrate that the enhancement factor (EF) of TEF can be as high as 3 orders of magnitudes in the optimal TEF geometry. At the DUV excitation wavelength of 244 nm, the spatial resolution and SPCE angles are 6 nm and ±23°, respectively, showing maximum EF of 7.4 × 10². Our results not only help understanding the underlying physical mechanism for developing high-sensitivity and high-resolution DUV-TEF platform, but also contribute to expanding TEF technology from visible to UV range.