Hierarchical microimaging of bone structure and function

Visualization of rat tendon in three dimensions using micro-Computed Tomography

Micro-computed tomography (CT) is an X-ray-based imaging modality that produces three-dimensional (3D), high-resolution images of whole-mount tissues, but is typically limited to dense tissues, such as bone. The X-rays readily pass-through tendons, rendering them transparent. Contrast-enhancing chemical stains have been explored, but their use to improve contrast in different tendon types and across developmental stages for micro-CT imaging has not been systematically evaluated. Therefore, we investigated how phosphotungstic acid (PTA) staining and tissue hydration impacts tendon contrast for micro-CT imaging. We showed that PTA staining increased X-ray absorption of tendon to enhance tissue contrast and obtain 3D micro-CT images of immature (postnatal day 21) and sexually mature (postnatal day 50) rat tendons within the tail and hindlimb. Further, we demonstrated that tissue hydration state following PTA staining significantly impacts soft tissue contrast. Using this method, we also found that tail tendon fascicles appear to cross between fascicle bundles. Ultimately, contrast-enhanced 3D micro-CT imaging will lead to better understanding of tendon structure, and relationships between the bone and soft tissues.•Simple tissue fixation and staining technique enhances soft tissue contrast for tendon visualization using micro-CT.•3D tendon visualization in situ advances understanding of musculoskeletal tissue structure and organization.

Designed Microbial Biosynthesis of Hierarchical Bone-Mimetic Biocomposites in 3D-Printed Soft Bioreactors

The creation of 3D biomimetic composite structures has important applications in tissue engineering, lightweight structures, drug delivery, and sensing. Previous approaches in fabricating 3D biomimetic composites have relied on blending or assembling chemically synthesized molecules or structures, making it challenging to achieve precise control of the size, geometry, and internal structure of the biomimetic composites. Here, we present a new approach for the creation of 3D bone-mimetic biocomposites with precisely controlled shape, hierarchical structure, and functionalities. Our approach is based on the integration of programmable microbial biosynthesis with 3D printing of gas-permeable and customizable bioreactors. The organic and inorganic components are bacterial cellulose and calcium hydroxyapatite via a mineral precursor, which are generated by Komagataeibacter xylinus and Bacillus simplex P6A, respectively, in 3D-printed silicone bioreactors in consecutive culturing cycles. This study is of high significance to biocomposites, biofabrication, and tissue engineering as it paves the way for the synergistic integration of microbial biosynthesis and additive manufacturing.

Integrated evaluation of biomechanical and biological properties of the biomimetic structural bone scaffold: Biomechanics, simulation analysis, and osteogenesis

A porous structure is essential for bone implants because it increases the bone ingrowth space and improves mechanical and biological properties. The biomimetically designed porous Voronoi scaffold can reconstruct the structure and function of cancellous bone; however, its comprehensive properties need to be investigated further. In this study, algorithms based on scaling factors were used to design the Voronoi scaffolds. Classic approaches, such as computer-aided design and the implicit surface method, have been used to design Diamond, Gyroid, and I-WP scaffolds as controls. All scaffolds were prepared by selective laser melting of titanium alloys and three-dimensional printing. Mechanical tests, finite element analysis, and in vitro and in vivo experiments were performed to investigate the biomechanical, cytologic, and osteogenic performance of the scaffolds, while computational fluid dynamics simulations were used to explore the underlying mechanisms. Diamond scaffolds have a better loading capacity, and the mechanical behaviors and fluid flow of Voronoi scaffolds are similar to those of the human trabecular bone. Cells showed more proliferation and distribution on the Diamond and Voronoi scaffolds and exhibited evident differentiation on Gyroid and Voronoi scaffolds. Bone formation was apparent on the inner part of the Gyroid, the outer part of the I-WP, and the entire Diamond and Voronoi scaffolds. The hydrodynamic properties and stimulus response of cells influenced by the porous structure account for the varied biological performance of the scaffolds. The Voronoi scaffolds with bionic mechanical behavior and an appropriate hydrodynamic response exhibit evident cell growth and osteogenesis, making them preferable for porous structural bone implants.

Deep learning to overcome Zernike phase-contrast nanoCT artifacts for automated micro-nano porosity segmentation in bone

Bone material contains a hierarchical network of micro- and nano-cavities and channels, known as the lacuna-canalicular network (LCN), that is thought to play an important role in mechanobiology and turnover. The LCN comprises micrometer-sized lacunae, voids that house osteocytes, and submicrometer-sized canaliculi that connect bone cells. Characterization of this network in three dimensions is crucial for many bone studies. To quantify X-ray Zernike phase-contrast nanotomography data, deep learning is used to isolate and assess porosity in artifact-laden tomographies of zebrafish bones. A technical solution is proposed to overcome the halo and shade-off domains in order to reliably obtain the distribution and morphology of the LCN in the tomographic data. Convolutional neural network (CNN) models are utilized with increasing numbers of images, repeatedly validated by `error loss' and `accuracy' metrics. U-Net and Sensor3D CNN models were trained on data obtained from two different synchrotron Zernike phase-contrast transmission X-ray microscopes, the ANATOMIX beamline at SOLEIL (Paris, France) and the P05 beamline at PETRA III (Hamburg, Germany). The Sensor3D CNN model with a smaller batch size of 32 and a training data size of 70 images showed the best performance (accuracy 0.983 and error loss 0.032). The analysis procedures, validated by comparison with human-identified ground-truth images, correctly identified the voids within the bone matrix. This proposed approach may have further application to classify structures in volumetric images that contain non-linear artifacts that degrade image quality and hinder feature identification.

On the material dependency of peri-implant morphology and stability in healing bone

The microstructural architecture of remodeled bone in the peri-implant region of screw implants plays a vital role in the distribution of strain energy and implant stability. We present a study in which screw implants made from titanium, polyetheretherketone and biodegradable magnesium-gadolinium alloys were implanted into rat tibia and subjected to a push-out test four, eight and twelve weeks after implantation. Screws were 4 mm in length and with an M2 thread. The loading experiment was accompanied by simultaneous three-dimensional imaging using synchrotron-radiation microcomputed tomography at 5 μm resolution. Bone deformation and strains were tracked by applying optical flow-based digital volume correlation to the recorded image sequences. Implant stabilities measured for screws of biodegradable alloys were comparable to pins whereas non-degradable biomaterials experienced additional mechanical stabilization. Peri-implant bone morphology and strain transfer from the loaded implant site depended heavily on the biomaterial utilized. Titanium implants stimulated rapid callus formation displaying a consistent monomodal strain profile whereas the bone volume fraction in the vicinity of magnesium-gadolinium alloys exhibited a minimum close to the interface of the implant and less ordered strain transfer. Correlations in our data suggest that implant stability benefits from disparate bone morphological properties depending on the biomaterial utilized. This leaves the choice of biomaterial as situational depending on local tissue properties.

Hierarchical helical carbon nanotube fibre as a bone-integrating anterior cruciate ligament replacement

High rates of ligament damage require replacements; however, current synthetic materials have issues with bone integration leading to implant failure. Here we introduce an artificial ligament that has the required mechanical properties and can integrate with the host bone and restore movement in animals. The ligament is assembled from aligned carbon nanotubes formed into hierarchical helical fibres bearing nanometre and micrometre channels. Osseointegration of the artificial ligament is observed in an anterior cruciate ligament replacement model where clinical polymer controls showed bone resorption. A higher pull-out force is found after a 13-week implantation in rabbit and ovine models, and animals can run and jump normally. The long-term safety of the artificial ligament is demonstrated, and the pathways involved in integration are studied.

Micron-resolution Imaging of Cortical Bone under 14 T Ultrahigh Magnetic Field

Compact, mineralized cortical bone tissues are often concealed on magnetic resonance (MR) images. Recent development of MR instruments and pulse techniques has yielded significant advances in acquiring anatomical and physiological information from cortical bone despite its poor 1 H signals. This work demonstrates the first MR research on cortical bones under an ultrahigh magnetic field of 14 T. The 1 H signals of different mammalian species exhibit multi-exponential decays of three characteristic T2 or T2 * values: 0.1-0.5 ms, 1-4 ms, and 4-8 ms. Systematic sample comparisons attribute these T2 /T2 * value ranges to collagen-bound water, pore water, and lipids, respectively. Ultrashort echo time (UTE) imaging under 14 T yielded spatial resolutions of 20-80 microns, which resolves the 3D anatomy of the Haversian canals. The T2 * relaxation characteristics further allow spatial classifications of collagen, pore water and lipids in human specimens. The study achieves a record of the spatial resolution for MR imaging in bone and shows that ultrahigh-field MR has the unique ability to differentiate the soft and organic compartments in bone tissues.

Differences in the Osseous Ultrastructure in 2 Differing Etiologies of Eagle Syndrome. A Micro-CT Study

OBJECTIVES

Eagle syndrome is a rare disease caused by an elongated styloid process (type I) or ossified stylohyoid ligament (type II) and causes a heterogeneous symptom complex, ranging from pain in the throat and neck to neurological symptoms and neurovascular entrapment. The 2 different types present differing shapes and ultrastructures and cause different symptoms. This study aimed to distinguish the 2 types by investigating the structures by micro-computed tomography.

METHODS

Micro-computed tomography was performed and evaluated in n=10 resected styloid processes from patients diagnosed with Eagle syndrome. The tissues were measured for their shape, ratio of soft tissue and bone amounts, bone volume, and ultrastructure, and compared within the groups.

RESULTS

The shapes of the different types were different and the ultrastructure differed between the 2 groups, with an absence of trabecular architecture in type II. The area of bone to nonbone tissues in type I samples was significantly higher compared with type II (P=0.007). Alike these results, the bone volume and bone-to-soft tissue ratio were significantly higher in type I compared with type II (P=0.009).

CONCLUSIONS

The findings suggest that both the popular theories (hyperplasia and metaplasia) may be probable but each solely valid for 1 type of Eagle. Type I may derive from bone hyperplasia with cancellous bone formation and rather high bone density in the elongated styloid process. Type II most likely originates from ligament metaplasia into bone without a compact structure.

Comparison of linear and nonlinear stepwise μFE displacement predictions to digital volume correlation measurements of trabecular bone biopsies

Digital volume correlation (DVC) enables to evaluate the ability of μFE models in predicting experimental results on the mesoscale. In this study predicted displacement fields of three different linear and materially nonlinear μFE simulation methods were compared to DVC measured displacement fields at specific load steps in the elastic regime (Step_El) and after yield (Step_Ult). Five human trabecular bone biopsies from a previous study were compressed in several displacement steps until failure. At every compression step, μCT images (resolution: 36 μm) were recorded. A global DVC algorithm was applied to compute the displacement fields at all loading steps. The unloaded 3D images were then used to generate homogeneous, isotropic, linear and materially nonlinear μFE models. Three different μFE simulation methods were used: linear (L), nonlinear (NL), and nonlinear stepwise (NLS). Regarding L and NL, the boundary conditions were derived from the interpolated displacement fields at Step_El and Step_Ult, while for the NLS method nonlinear changes of the boundary conditions of the experiments were captured using the DVC displacement field of every available load step until Step_El and Step_Ult. The predicted displacement fields of all μFE simulation methods were in good agreement with the DVC measured displacement fields (individual specimens: R²>0.83 at Step_El and R²>0.59 at Step_Ult; pooled data: R²>0.97 at Step_El and R²>0.92 at Step_Ult). At Step_El, all three simulation methods showed similar intercepts, slopes, and coefficients of determination while the nonlinear μFE models improved the prediction of the displacement fields slightly in all Cartesian directions at Step_Ult (individual specimens: L: R²>0.59 and NL, NLS: R²>0.68; pooled data: L: R²>0.92 and NL, NLS: R²>0.94). Damaged/overstrained elements in L, NL, and NLS occurred at similar locations but the number of overstrained elements was overestimated when using the L simulation method. Considering the increased solving time of the nonlinear μFE models as well as the acceptable performance in displacement prediction of the linear μFE models, one can conclude that for similar use cases linear μFE models represent the best compromise between computational effort and accuracy of the displacement field predictions.

Characterizing the Mechanical Behavior of Bone and Bone Surrogates in Compression Using pQCT

Many axial and appendicular skeleton bones are subjected to repetitive loading during daily activities. Until recently, the structural analysis of fractures has been limited to 2D sections, and the dynamic assessment of fracture progression has not been possible. The structural failure was analyzed using step-wise micro-compression combined with time-lapsed micro-computed tomographic imaging. The structural failure was investigated in four different sample materials (two different bone surrogates, lumbar vertebral bodies from bovine and red deer). The samples were loaded in different force steps based on uniaxial compression tests. The micro-tomography images were used to create three-dimensional models from which various parameters were calculated that provide information about the structure and density of the samples. By superimposing two 3D images and calculating the different surfaces, it was possible to precisely analyze which trabeculae failed in which area and under which load. According to the current state of the art, bone mineral density is usually used as a value for bone quality, but the question can be raised as to whether other values such as trabecular structure, damage accumulation, and bone mineralization can predict structural competence better than bone mineral density alone.

Micro-CT-Based Bone Microarchitecture Analysis of the Murine Skull

X-ray micro-computed tomography (micro-CT) imaging has important applications in microarchitecture analysis of cortical and trabecular bone structure. While standardized protocols exist for micro-CT-based microarchitecture assessment of long bones, specific protocols need to be developed for different types of skull bones taking into account differences in embryogenesis, organization, development, and growth compared to the rest of the body. This chapter describes the general principles of bone microarchitecture analysis of murine craniofacial skeleton to accommodate for morphological variations in different regions of interest.

Novel insights into nanomaterials for immunomodulatory bone regeneration

Bone defect repair caused by trauma, congenital malformation, tumors, infection or systemic diseases remains the focus of attention in regeneration medicine. Recent advances in osteoimmunology indicate that immune cells and correlative cytokines modulate the delicate balance between osteoblasts and osteoclasts and induce a favorable microenvironment for bone regeneration. With superior attributes that imitate the three-dimensional architecture of natural bone, excellent fabricability, mechanical and biological properties, nanomaterials (NMs) are becoming attractive in the field of bone tissue engineering. Particularly, it could be an effective strategy for immunomodulatory bone regeneration by engineering NMs involved in composition nature, nanoarchitectural morphology, surface chemistry, topography and biological molecules, whose mechanisms potentially refer to regulating the phenotype of high-plastic immune cells and inducing cytokine secretion to accelerate osteogenesis. Despite these prominent achievements, the employment of NMs is poorly translated into clinical trials due to the lack of knowledge about the interaction between NMs and the immune system. For this reason, we sketch out the hierarchical structure of bone and its natural healing process, followed by discussion about the effects of immune cells on bone regeneration. Novel horizons focusing on recent progressions in the architectural and physicochemical performances of NMs and their impacts on the body defence mechanism are also emphasized, hoping to provide novel insights for the fabrication of bone graft materials in tissue engineering.

Augmenting Osteoporosis Imaging with Machine Learning

PURPOSE OF REVIEW

In this paper, we discuss how recent advancements in image processing and machine learning (ML) are shaping a new and exciting era for the osteoporosis imaging field. With this paper, we want to give the reader a basic exposure to the ML concepts that are necessary to build effective solutions for image processing and interpretation, while presenting an overview of the state of the art in the application of machine learning techniques for the assessment of bone structure, osteoporosis diagnosis, fracture detection, and risk prediction.

RECENT FINDINGS

ML effort in the osteoporosis imaging field is largely characterized by "low-cost" bone quality estimation and osteoporosis diagnosis, fracture detection, and risk prediction, but also automatized and standardized large-scale data analysis and data-driven imaging biomarker discovery. Our effort is not intended to be a systematic review, but an opportunity to review key studies in the recent osteoporosis imaging research landscape with the ultimate goal of discussing specific design choices, giving the reader pointers to possible solutions of regression, segmentation, and classification tasks as well as discussing common mistakes.

Towards in silico Models of the Inflammatory Response in Bone Fracture Healing

In silico modeling is a powerful strategy to investigate the biological events occurring at tissue, cellular and subcellular level during bone fracture healing. However, most current models do not consider the impact of the inflammatory response on the later stages of bone repair. Indeed, as initiator of the healing process, this early phase can alter the regenerative outcome: if the inflammatory response is too strongly down- or upregulated, the fracture can result in a non-union. This review covers the fundamental information on fracture healing, in silico modeling and experimental validation. It starts with a description of the biology of fracture healing, paying particular attention to the inflammatory phase and its cellular and subcellular components. We then discuss the current state-of-the-art regarding in silico models of the immune response in different tissues as well as the bone regeneration process at the later stages of fracture healing. Combining the aforementioned biological and computational state-of-the-art, continuous, discrete and hybrid modeling technologies are discussed in light of their suitability to capture adequately the multiscale course of the inflammatory phase and its overall role in the healing outcome. Both in the establishment of models as in their validation step, experimental data is required. Hence, this review provides an overview of the different in vitro and in vivo set-ups that can be used to quantify cell- and tissue-scale properties and provide necessary input for model credibility assessment. In conclusion, this review aims to provide hands-on guidance for scientists interested in building in silico models as an additional tool to investigate the critical role of the inflammatory phase in bone regeneration.

Structurally Dynamic Hydrogels for Biomedical Applications: Pursuing a Fine Balance between Macroscopic Stability and Microscopic Dynamics

Owing to their unique chemical and physical properties, hydrogels are attracting increasing attention in both basic and translational biomedical studies. Although the classical hydrogels with static networks have been widely reported for decades, a growing number of recent studies have shown that structurally dynamic hydrogels can better mimic the dynamics and functions of natural extracellular matrix (ECM) in soft tissues. These synthetic materials with defined compositions can recapitulate key chemical and biophysical properties of living tissues, providing an important means to understanding the mechanisms by which cells sense and remodel their surrounding microenvironments. This review begins with the overall expectation and design principles of dynamic hydrogels. We then highlight recent progress in the fabrication strategies of dynamic hydrogels including both degradation-dependent and degradation-independent approaches, followed by their unique properties and use in biomedical applications such as regenerative medicine, drug delivery, and 3D culture. Finally, challenges and emerging trends in the development and application of dynamic hydrogels are discussed.

3-D microarchitectural properties and rod- and plate-like trabecular morphometric properties of femur head cancellous bones in patients with rheumatoid arthritis, osteoarthritis, and osteoporosis

Objectives

We quantify 3-D microarchitectural properties of femoral head cancellous bones from patients with rheumatoid arthritis (RA, n ​= ​12), osteoarthritis (OA, n ​= ​15), osteoporosis (OP, n ​= ​24), or donor controls (CNT, n ​= ​8); and investigate their rod- and plate-like trabecular morphometric properties of trabecular bone tissues and compare these properties between them.

Methods

Femoral heads were harvested during total hip replacement surgeries or collected from donors. Four cubic cancellous bone samples produced from each femoral head were micro-CT scanned to quantify their microarchitectural and rod- and plate-like trabecular properties. The samples were then tested in compression to determine mechanical properties.

Results

The microarchitectural properties of femoral head cancellous bone revealed significant differences among the 4 groups, but not between RA and OA. Bone volume fraction was significantly greater in the RA and the OA than in the OP and the CNT. Structure model index was significantly lower in the RA and the OA than in the OP. Number of rods in the RA was significantly greater than in the other 3 groups. Number of plates and plate volume density in the RA and the OA were significantly greater than in the OP and the CNT. Mechanical properties were significantly greater in the RA and the OA than in the OP. The single best determinant for mechanical properties was bone volume fraction.

Conclusions

This study demonstrates significant differences in 3-D microarchitectural properties and rod- and plate-like trabecular morphometric properties among patients with RA, OA, or OP. The RA and OA cancellous bones displayed similar patterns of microarchitectural degeneration and pronounced different microarchitectures from the OP. The OP group revealed the weakest cancellous bone strength, while the RA and OA groups exhibited a compensatory effect that maintains bone tissues, and hence mechanical properties.

The translational potential of this article

The study enhances the understanding of microarchitectural degeneration of diseased cancellous bone. The OP group had the weakest cancellous bone strength, while the RA and OA groups exhibited a compensatory effect that maintains bone tissues, and hence mechanical properties. These results are particularly important for design and survival of joint prosthesis.

Mapping Bone Surface Composition Using Real-Time Surface Tracked Micro-Raman Spectroscopy

The surface of bone tells a story - one that is worth a thousand words - of how it is built and how it is repaired. Chemical (i.e., composition) and physical (i.e., morphology) characteristics of the bone surface are analogous to a historical record of osteogenesis and provide key insights into bone quality. Analysis of bone chemistry is of particular relevance to the advancement of human health, cell biology, anthropology/archaeology, and biomedical engineering. Although scanning electron microscopy remains a popular and versatile technique to image bone across multiple length scales, limited chemical information can be obtained. Micro-Raman spectroscopy is a valuable tool for nondestructive chemical/compositional analysis of bone. However, signal integrity losses occur frequently during wide-field mapping of non-planar surfaces. Samples for conventional Raman imaging are, therefore, rendered planar through polishing or sectioning to ensure uniform signal quality. Here, we demonstrate ν1 PO43- and ν1 CO32- peak intensity losses where the sample surface and the plane of focus are offset by over 1-2 μm when underfocused and 2-3 μm when overfocused at 0.5-1 s integration time (15 mW, 633 nm laser). A technique is described for mapping the composition of the inherently irregular/non-planar surface of bone. The challenge posed by the native topology characteristic of this unique biological system is circumvented via real-time focus-tracking based on laser focus optimization by continuous closed-loop feedback. At the surface of deproteinized and decellularized/defatted sheep tibial cortical bone, regions of interest up to 1 mm2 were scanned at micrometer and submicrometer resolution. Despite surface height deviations exceeding 100 μm, it is possible to seamlessly probe local gradients in organic and inorganic constituents of the extracellular matrix as markers of bone metabolism and bone turnover, blood vessels and osteocyte lacunae, and the rope-like mineralized bundles that comprise the mineral phase at the bone surface.

Analytical methodology to measure periodontal bone morphometry following orthodontic tooth movement in mice

Introduction

Basic research in orthodontics is commonly conducted in rodents. However, experimental studies on orthodontic tooth movement (OTM) lack a standard method to examine OTM and periodontal changes. This study describes a unifying protocol for the analysis of OTM and associated bone microarchitectural changes in mice using microcomputed tomography (µCT).

Methods

Mice (10 animals/group) were divided into control and OTM groups. OTM was generated by anchoring a nickel–titanium closed-coil spring to the upper incisors to pull the upper left first molar. A third group of TNFα −/− mice was added since these are known to have slower OTM. Using µCT, we implemented and tested a number of methods to measure OTM distance and examine 3D bone morphometric parameters associated with OTM in mice.

Results

In total, we tested five methods to measure the OTM distance in mice. The results indicated that measuring the intermolar diastema, and assessing tooth movement relative to the anterior root of the zygomatic arch, displayed the lowest standard deviation and enabled optimal detection of intergroup differences. We also developed two protocols for µCT analysis of the periradicular bone that yielded no false-positive results. Our results revealed that including the width of the periodontal ligament rather than excluding it from the region of interest in mice detected more statistically significant differences in the morphometric parameters between the OTM and control sides and between WT and TNFα −/− mice despite more subtle differences.

Conclusions

We, therefore, propose new guidelines for a standardized μCT-based method to analyse OTM and the extent of the periradicular bone structural changes in mice.

The influence of microstructure on crack propagation in cortical bone at the mesoscale

The microstructure of cortical bone is key for the tissue's high toughness and strength and efficient toughening mechanisms have been identified at the microscale, for example when propagating cracks interact with the osteonal microstructure. Finite element models have been proposed as suitable tools for analyzing the complex link between the local tissue structure and the fracture resistance of cortical bone. However, previous models that could capture realistic crack paths in cortical bone were due to the required computational effort limited to idealized osteon geometries and small (<1 mm²) model domains. The objective of this study was therefore to bridge the gap between experimental and numerical analysis of crack propagation in cortical bone by introducing image-based models at the mesoscale. Tissue orientation maps from high-resolution micro-CT images were used to define the distribution and orientation of weak interfaces in the models. Crack propagation was simulated using the extended finite element method in combination with an interface damage model, previously developed to simulate crack propagation in microstructural osteon models. The results showed that image-based mesoscale models can be used to capture interactions between cracks and microstructure. The simulated crack paths predicted the general trends seen in experiments with more irregular patterns for cracks propagating perpendicular compared to parallel to the osteon orientation. In all, the proposed method enabled an efficient description of the tissue level microstructure, which is a necessity to predict realistic crack paths in cortical bone and is an important step towards simulating crack propagation in bone models in 3D.

Breaking new ground in mineralized tissue: Assessing tissue quality in clinical and laboratory studies

Mineralized tissues, such as bone and teeth, have extraordinary mechanical properties of both strength and toughness. This mechanical behavior originates from deformation and fracture resistance mechanisms in their multi-scale structure. The term quality describes the matrix composition, multi-scale structure, remodeling dynamics, water content, and micro-damage accumulation in the tissue. Aging and disease result in changes in the tissue quality that may reduce strength and toughness and lead to elevated fracture risk. Therefore, the capability to measure the quality of mineralized tissues provides critical information on disease progression and mechanical integrity. Here, we provide an overview of clinical and laboratory-based techniques to assess the quality of mineralized tissues in health and disease. Current techniques used in clinical settings include radiography-based (radiographs, dual energy x-ray absorptiometry, EOS) and x-ray tomography-based methods (high resolution peripheral quantitative computed tomography, cone beam computed tomography). In the laboratory, tissue quality can be investigated in ex vivo samples with x-ray imaging (micro and nano-computed tomography, x-ray microscopy), electron microscopy (scanning/transmission electron imaging (SEM/STEM), backscattered scanning electron microscopy, Focused Ion Beam-SEM), light microscopy, spectroscopy (Raman spectroscopy and Fourier transform infrared spectroscopy) and assessment of mechanical behavior (mechanical testing, fracture mechanics and reference point indentation). It is important for clinicians and basic science researchers to be aware of the techniques available in different types of research. While x-ray imaging techniques translated to the clinic have provided exceptional advancements in patient care, the future challenge will be to incorporate high-resolution laboratory-based bone quality measurements into clinical settings to broaden the depth of information available to clinicians during diagnostics, treatment and management of mineralized tissue pathologies.

Assessment of irradiated socket healing in the rabbit's mandible: Experimental study

As bone healing is altered after external radiation therapy, its evaluation is mandatory and lacks in clinical practice. The aim of the pilot study was to validate micro computed tomography (microCT) as a simple and reliable technique for assessing irradiated bone healing in the rabbit's mandible and compare with histologic findings. Nineteen rabbits (female New Zealand white) were used. The radiation protocol consisted of 5 sessions delivering 8.5 Gy each. MicroCT was performed at D0, D7, D14, D28 and D42 for the control group and D0, D28 and D42 for the irradiated group. A modified Perry's score was determined on histologic samples, and comparison between microCT and histological findings was performed. The main differences between irradiated and non-irradiated rabbits were observed at Day 28 and 42. There was a strong correlation between imaging and histologic findings. Radiation decreases bone quality and bone mineral density. As the correlation was strong between microCT and histologic findings, micro imaging could be considered as a simple and reliable technique to assess bone healing after radiation therapy and allows an easy comparison between samples, without invasive procedures. Great attention should be kept on the parameters and on the region of interest. The development of in-vivo microCT enlarges the perspectives of microCT use in experimental studies, avoiding invasive procedures, and preserving animal lives and well-being, and furthermore lead to clinical applications.

Topographic modeling of early human osteoarthritis in sheep

Articular cartilage damage occurring during early osteoarthritis (OA) is a key event marking the development of the disease. Here, we modeled early human OA by gathering detailed spatiotemporal data from surgically induced knee OA development in sheep. We identified a specific topographical pattern of osteochondral changes instructed by a defined meniscal injury, showing that both cartilage and subchondral bone degeneration are initiated from the region adjacent to the damage. Alterations of the subarticular spongiosa arising locally and progressing globally disturbed the correlations of cartilage with subchondral bone seen at homeostasis and were indicative of disease progression. We validated our quantitative findings against human OA, showing a similar pattern of early OA correlating with regions of meniscal loss and an analogous late critical disturbance within the entire osteochondral unit. This translational model system can be used to elucidate mechanisms of OA development and provides a roadmap for investigating regenerative therapies.

High resolution 3D visualization of the spinal cord in a post-mortem murine model

A crucial issue in the development of therapies to treat pathologies of the central nervous system is represented by the availability of non-invasive methods to study the three-dimensional morphology of spinal cord, with a resolution able to characterize its complex vascular and neuronal organization. X-ray phase contrast micro-tomography enables a high-quality, 3D visualization of both the vascular and neuronal network simultaneously without the need of contrast agents, destructive sample preparations or sectioning. Until now, high resolution investigations of the post-mortem spinal cord in murine models have mostly been performed in spinal cords removed from the spinal canal. We present here post-mortem phase contrast micro-tomography images reconstructed using advanced computational tools to obtain high-resolution and high-contrast 3D images of the fixed spinal cord without removing the bones and preserving the richness of micro-details available when measuring exposed spinal cords. We believe that it represents a significant step toward the in-vivo application.

Validation of a rabbit model of irradiated bone healing: preliminary report

Introduction: External radiotherapy can lead to severe bone alteration. The aim of this pilot study was to validate a model for assessment of postextractional bone healing in the irradiated rabbit mandible. Material and method: The radiation protocol consisted of 5 sessions delivering 8.5 Gy each. Surgery was performed immediately after completion of radiotherapy. Sacrifices were performed from Day 0 to Day 42. Results: The bone mineral density and the trabecular number were decreased after radiotherapy whereas trabecular separation increased. The main differences between irradiated and non-irradiated rabbits were observed at Day 28 and 42. Discussion: Radiation seems to cause a delay in bone healing. It decreases bone quality and bone mineral density. Five sessions seem to be a valuable compromise between tissues effect and feasibility of the experiment. Conclusion: This model seems to be valuable for evaluating postextractional bone healing in the irradiated rabbit mandible.

In vivo monitoring of bone microstructure by propagation-based phase-contrast computed tomography using monochromatic synchrotron light

Hard X-ray phase-contrast imaging is sensitive to density variation in objects and shows a dose advantage for in vivo observation over absorption-contrast imaging. We examined the capability of propagation-based phase-contrast tomography (PB-PCT) with single-distance phase retrieval for tracking of bone structure and mineral changes using monochromatic synchrotron light. Female mice underwent ovariectomy and drill-hole surgery in the right tibial diaphysis and were divided into two groups: OVX and OVX-E (n = 6 each); the latter group was treated with intraperitoneal administration of 14,15-epoxyeicosatrienoic acid (14,15-EET) for promoting bone repair. Age-matched mice subjected to sham ovariectomy and drill-hole surgery (Sham) were also prepared (n = 6). In vivo CT scans of the drilled defect were acquired 3, 7, and 11 days after surgery, and tomographic images were matched by three-dimensional registration between successive time points for monitoring the process of defect filling. In addition, using absorption-contrast CT as the reference method, the validity of PB-PCT was evaluated in one mouse by comparing images of tibial metaphyseal bone between the two methods in terms of bone geometry as well as the measure of mineralization. Although phase retrieval is strictly valid only for single-material objects, PB-PCT, with its lower radiation dose, could provide a depiction of bone structure similar to that from absorption-contrast CT. There was a significant correlation of linear absorption coefficients between the two methods, indicating the possibility of a rough estimate of the measure of mineralization by PB-PCT. Indeed, delayed bone regeneration (OVX vs. Sham) and the efficacy of 14,15-EET for improving osteoporotic bone repair (OVX-E vs. OVX) could be detected in both bone volume and mineralization by PB-PCT. Thus, in combination with single-distance phase retrieval, PB-PCT would have great potential for providing a valuable tool to track changes in bone structure and mineralization, and for evaluating the effects of therapeutic interventions as well.

Hole in One: an element reduction approach to modeling bone porosity in finite element analysis

Finite element analysis has been an increasingly widely applied biomechanical modeling method in many different science and engineering fields over the last decade. In the biological sciences, there are many examples of FEA in areas such as paleontology and functional morphology. Despite this common use, the modeling of trabecular bone remains a key issue because their highly complex and porous geometries are difficult to replicate in the solid mesh format required for many simulations. A common practice is to assign uniform model material properties to whole or portions of models that represent trabecular bone. In this study we aimed to demonstrate that a physical, element reduction approach constitutes a valid protocol for addressing this problem in addition to the wholesale mathematical approach. We tested a customized script for element reduction modeling on five exemplar trabecular geometry models of carnivoran temporomandibular joints, and compared stress and strain energy results of both physical and mathematical trabecular modeling to models incorporating actual trabecular geometry. Simulation results indicate that that the physical, element reduction approach generally outperformed the mathematical approach: physical changes in the internal structure of experimental cylindrical models had a major influence on the recorded stress values throughout the model, and more closely approximates values obtained in models containing actual trabecular geometry than solid models with modified trabecular material properties. In models with both physical and mathematical adjustments for bone porosity, the physical changes exhibit more weight than material properties changes in approximating values of control models. Therefore, we conclude that maintaining or mimicking the internal porosity of a trabecular structure is a more effective method of approximating trabecular bone behavior in finite element models than modifying material properties.

In situ characterization of nanoscale strains in loaded whole joints via synchrotron X-ray tomography

Imaging techniques for quantifying how the hierarchical structure of deforming joints changes are constrained by destructive sample treatments, sample-size restrictions and lengthy scan times. Here, we report the use of fast, low-dose pink-beam synchrotron X-ray tomography combined with mechanical loading at nanometric precision for the in situ imaging, at resolutions lower than 100 nm, of mechanical strain in intact untreated joints under physiologically realistic conditions. We show that, in young, aged, and osteoarthritic mice, hierarchical changes in tissue structure and mechanical behaviour can be simultaneously visualized, and that tissue structure at the cellular level correlates with whole-joint mechanical performance. We also used the tomographic approach to study the co-localization of tissue strains to specific chondrocyte lacunar organizations within intact loaded joints, and for the exploration of the role of calcified-cartilage stiffness on the biomechanics of healthy and pathological joints.

Quantifying Subresolution 3D Morphology of Bone with Clinical Computed Tomography

The aim of this study was to quantify sub-resolution trabecular bone morphometrics, which are also related to osteoarthritis (OA), from clinical resolution cone beam computed tomography (CBCT). Samples (n = 53) were harvested from human tibiae (N = 4) and femora (N = 7). Grey-level co-occurrence matrix (GLCM) texture and histogram-based parameters were calculated from CBCT imaged trabecular bone data, and compared with the morphometric parameters quantified from micro-computed tomography. As a reference for OA severity, histological sections were subjected to OARSI histopathological grading. GLCM and histogram parameters were correlated to bone morphometrics and OARSI individually. Furthermore, a statistical model of combined GLCM/histogram parameters was generated to estimate the bone morphometrics. Several individual histogram and GLCM parameters had strong associations with various bone morphometrics (|r| > 0.7). The most prominent correlation was observed between the histogram mean and bone volume fraction (r = 0.907). The statistical model combining GLCM and histogram-parameters resulted in even better association with bone volume fraction determined from CBCT data (adjusted R² change = 0.047). Histopathology showed mainly moderate associations with bone morphometrics (|r| > 0.4). In conclusion, we demonstrated that GLCM- and histogram-based parameters from CBCT imaged trabecular bone (ex vivo) are associated with sub-resolution morphometrics. Our results suggest that sub-resolution morphometrics can be estimated from clinical CBCT images, associations becoming even stronger when combining histogram and GLCM-based parameters.

Next-generation imaging of the skeletal system and its blood supply

Bone is organized in a hierarchical 3D architecture. Traditionally, analysis of the skeletal system was based on bone mass assessment by radiographic methods or on the examination of bone structure by 2D histological sections. Advanced imaging technologies and big data analysis now enable the unprecedented examination of bone and provide new insights into its 3D macrostructure and microstructure. These technologies comprise ex vivo and in vivo methods including high-resolution computed tomography (CT), synchrotron-based imaging, X-ray microscopy, ultra-high-field magnetic resonance imaging (MRI), light-sheet fluorescence microscopy, confocal and intravital two-photon imaging. In concert, these techniques have been used to detect and quantify a novel vascular system of trans-cortical vessels in bone. Furthermore, structures such as the lacunar network, which harbours and connects osteocytes, become accessible for 3D imaging and quantification using these methods. Next-generation imaging of the skeletal system and its blood supply are anticipated to contribute to an entirely new understanding of bone tissue composition and function, from macroscale to nanoscale, in health and disease. These insights could provide the basis for early detection and precision-type intervention of bone disorders in the future.

X-ray Micro-Computed Tomography for Nondestructive Three-Dimensional (3D) X-ray Histology

Historically, micro-computed tomography (μCT) has been considered unsuitable for histologic analysis of unstained formalin-fixed, paraffin-embedded soft tissue biopsy specimens because of a lack of image contrast between the tissue and the paraffin. However, we recently demonstrated that μCT can successfully resolve microstructural detail in routinely prepared tissue specimens. Herein, we illustrate how μCT imaging of standard formalin-fixed, paraffin-embedded biopsy specimens can be seamlessly integrated into conventional histology workflows, enabling nondestructive three-dimensional (3D) X-ray histology, the use and benefits of which we showcase for the exemplar of human lung biopsy specimens. This technology advancement was achieved through manufacturing a first-of-kind μCT scanner for X-ray histology and developing optimized imaging protocols, which do not require any additional sample preparation. 3D X-ray histology allows for nondestructive 3D imaging of tissue microstructure, resolving structural connectivity and heterogeneity of complex tissue networks, such as the vascular network or the respiratory tract. We also demonstrate that 3D X-ray histology can yield consistent and reproducible image quality, enabling quantitative assessment of a tissue's 3D microstructures, which is inaccessible to conventional two-dimensional histology. Being nondestructive, the technique does not interfere with histology workflows, permitting subsequent tissue characterization by means of conventional light microscopy-based histology, immunohistochemistry, and immunofluorescence. 3D X-ray histology can be readily applied to a plethora of archival materials, yielding unprecedented opportunities in diagnosis and research of disease.

Investigating Osteocytic Perilacunar/Canalicular Remodeling

PURPOSE OF REVIEW

In perilacunar/canalicular remodeling (PLR), osteocytes dynamically resorb, and then replace, the organic and mineral components of the pericellular extracellular matrix. Given the enormous surface area of the osteocyte lacuna-canalicular network (LCN), PLR is important for maintaining homeostasis of the skeleton. The goal of this review is to examine the motivations and critical considerations for the analysis of PLR, in both in vitro and in vivo systems.

RECENT FINDINGS

Morphological approaches alone are insufficient to elucidate the complex mechanisms regulating PLR in the healthy skeleton and in disease. Understanding the role and regulation of PLR will require the incorporation of standardized PLR outcomes as a routine part of skeletal phenotyping, as well as the development of improved molecular and cellular outcomes. Current PLR outcomes assess PLR enzyme expression, the LCN, and bone matrix composition and organization, among others. Here, we discuss current PLR outcomes and how they have been applied to study PLR induction and suppression in vitro and in vivo. Given the role of PLR in skeletal health and disease, integrated analysis of PLR has potential to elucidate new mechanisms by which osteocytes participate in skeletal health and disease.

Iodine-Enhanced Micro-CT Imaging of Soft Tissue on the Example of Peripheral Nerve Regeneration

Microcomputed tomography (μCT) is widely used for the study of mineralized tissues, but a similar use for soft tissues is hindered by their low X-ray attenuation. This limitation can be overcome by the recent development of different staining techniques. Staining with Lugol's solution, a mixture of one part iodine and two parts potassium iodide in water, stands out among these techniques for its low complexity and cost. Currently, Lugol staining is mostly used for anatomical examination of tissues. In the present study, we seek to optimize the quality and reproducibility of the staining for ex vivo visualization of soft tissues in the context of a peripheral nerve regeneration model in the rat. We show that the staining result not only depends on the concentration of the staining solution but also on the amount of stain in relation to the tissue volume and composition, necessitating careful adaptation of the staining protocol to the respective specimen tissue. This optimization can be simplified by a stepwise staining which we show to yield a similar result compared to staining in a single step. Lugol staining solution results in concentration-dependent tissue shrinkage which can be minimized but not eliminated. We compared the shrinkage of tendon, nerve, skeletal muscle, heart, brain, and kidney with six iterations of Lugol staining. 60 ml of 0.3% Lugol's solution per cm³ of tissue for 24 h yielded good results on the example of a peripheral nerve regeneration model, and we were able to show that the regenerating nerve inside a silk fibroin tube can be visualized in 3D using this staining technique. This information helps in deciding the region of interest for histological imaging and provides a 3D context to histological findings. Correlating both imaging modalities has the potential to improve the understanding of the regenerative process.

Delivery vehicle of muscle-derived irisin based on silk/calcium silicate/sodium alginate composite scaffold for bone regeneration

Background

Irisin is a cytokine produced by skeletal muscle and usually plays a pivotal role in inducing fat browning and regulating energy expenditure. In recent years, it was found that irisin might be the molecular entity responsible for muscle–bone connectivity and is useful in osteogenesis induction.

Materials and methods

To study its effect on bone regeneration, we developed silk/calcium silicate/sodium alginate (SCS) composite scaffold based on an interpenetrating network hydrogel containing silk fibroin, calcium silicate, sodium alginate. Then we loaded irisin on the SCS before coating it with polyvinyl alcohol (PVA). The SCS/P scaffold was physically characterized and some in vitro and in vivo experiments were carried out to evaluate the scaffold effect on bone regeneration.

Results

The SCS/P scaffold was showed a porous sponge structure pursuant to scanning electron microscopy analysis. The release kinetics assay demonstrated that irisin was stably released from the irisin-loaded hybrid system (i/SCS/P system) to 50% within 7 days. Moreover, osteoinductive studies using bone marrow stem cells (BMSCs) in vitro exhibited the i/SCS/P system improved the activity of alkaline phosphatase (ALP) and enhanced the expression levels of a series of osteogenic markers containing Runx-2, ALP, BMP2, Osterix, OCN, and OPN. Alizarin red staining also demonstrated the promotion of osteogenesis induced by i/SCS/P scaffolds. In addition, in vivo studies showed that increased bone regeneration with better mineralization and higher quality was found during the repair of rat calvarial defects through utilizing the i/SCS/P system.

Conclusion

These data provided strong evidence that the composite i/SCS/P would be a promising substitute for bone tissue engineering.

Biomechanics of Femoral Neck Fractures and Implications for Fixation

Fractures of the femoral neck can occur in young healthy individuals due to high loads occurring during motor vehicle accidents, impacts, or falls. Failure forces are lower if impacts occur sideways onto the greater trochanter as compared with vertical loading of the hip. Bone density, bone geometry, and thickness of cortical bone at the femoral neck contribute to its mechanical strength. Femoral neck fractures in young adults require accurate reduction and stable internal fixation. The available techniques for fracture fixation at the femoral neck (cannulated screws, hip screw systems, proximal femur plates, and cephallomedullary nails) are reviewed with respect to their competence to provide biomechanical stability. Mechanically unstable fractures require a load-bearing implant, such as hip screws, with antirotational screws or intramedullary nails. Subcapital or transcervical fracture patterns and noncomminuted fractures enable load sharing and can be securely fixed with cannulated screws or solitary hip screw systems without compromising fixation stability.

A multi-factorial analysis of bone morphology and fracture strength of rat femur in response to ovariectomy

BACKGROUND

Postmenopausal osteoporosis develops due to a deficiency of estrogen that causes a decrease in bone mass and changes in the macro- and micro-architectural structure of the bone, leading to the loss of mechanical strength and an increased risk of fracture. Although the assessment of bone mineral density (BMD) has been widely used as a gold standard for diagnostic screening of bone fracture risks, it accounts for only a part of the variation in bone fragility; thus, it is necessary to consider other determinants of bone strength. Therefore, we aimed to comprehensively evaluate the architectural changes of the bone that influence bone fracture strength, together with the different sensitivities of cortical and trabecular bone in response to ovariectomy (OVX).

METHODS

Bone morphology parameters were separately analyzed both in cortical and in trabecular bones, at distal-metaphysis, and mid-diaphysis of OVX rat femurs. Three-point bending test was performed at mid-diaphysis of the femurs. Correlation of OVX-induced changes of morphological parameters with breaking force was analyzed using Pearson's correlation coefficient.

RESULTS

OVX resulted in a decline in the bone volume of distal-metaphysis trabecular bone, but an increase in distal-metaphysis and mid-diaphysis cortical bone volume. Tissue mineral density (TMD) remained unchanged in both the trabecular and cortical bone of the distal metaphysis but decreased in cortical bone of the mid-diaphysis. The OVX significantly increased the breaking force at mid-diaphysis of the femurs.

CONCLUSIONS

OVX decreased the trabecular bone volume of the distal-metaphysis and increased the cortical bone volume of the distal-metaphysis and mid-diaphysis. Despite the reduction in TMD and increased cortical porosity, bone fracture strength increased in the mid-diaphysis after OVX. These results indicate that analyzing a single factor, i.e., BMD, is not sufficient to predict the absolute fracture risk of the bone, as OVX-induced bone response vary, depending on the bone type and location. Our results strongly support the necessity of analyzing bone micro-architecture and site specificity to clarify the true etiology of osteoporosis in a clinical setting.

Identifying animal taxa used to manufacture bone tools during the Middle Stone Age at Sibudu, South Africa: Results of a CT-rendered histological analysis

This paper presents the histological characterisation of a selection of worked bone artefacts from Middle Stone Age layers at Sibudu cave, South Africa. Histographic rendering is achieved using high-resolution Computed Tomography, which is non-destructive and facilitates three-dimensional histologic analysis. Excellent congruency in image quality was achieved with previous studies using this method. The results show that most of the artefact fragments contain mostly primary lamellar tissue, which is the bone tissue best adapted to withstand impact stresses. This indicates that bone with greater elastic properties was chosen. Histological characterisation allows the identification of animal taxa. Based on the sample analysed in this paper, Perissodactyla bone was used predominantly in the older layers at the site. Artiodactyla are represented throughout but appear far more frequently in the later (post-Howiesons Poort onwards) layers. Some of the Artiodactyla specimens have high proportions of Haversian tissue, reducing elasticity. The higher percentages of Haversian tissue in the post-Howiesons Poort artefacts relative to Holocene examples from southern Africa suggests that people may have started experimenting with bone from different animal taxa at this time and had not yet learned to eliminate the mechanically weaker secondary tissue. Apart from mechanical considerations, possible cultural constraints governing raw material selection is also explored.

Patient-specific in silico models can quantify primary implant stability in elderly human bone

Secure implant fixation is challenging in osteoporotic bone. Due to the high variability in inter- and intra-patient bone quality, ex vivo mechanical testing of implants in bone is very material- and time-consuming. Alternatively, in silico models could substantially reduce costs and speed up the design of novel implants if they had the capability to capture the intricate bone microstructure. Therefore, the aim of this study was to validate a micro-finite element model of a multi-screw fracture fixation system. Eight human cadaveric humerii were scanned using micro-CT and mechanically tested to quantify bone stiffness. Osteotomy and fracture fixation were performed, followed by mechanical testing to quantify displacements at 12 different locations on the instrumented bone. For each experimental case, a micro-finite element model was created. From the micro-finite element analyses of the intact model, the patient-specific bone tissue modulus was determined such that the simulated apparent stiffness matched the measured stiffness of the intact bone. Similarly, the tissue modulus of a small damage region around each screw was determined for the instrumented bone. For validation, all in silico models were rerun using averaged material properties, resulting in an average coefficient of determination of 0.89 ± 0.04 with a slope of 0.93 ± 0.19 and a mean absolute error of 43 ± 10 μm when correlating in silico marker displacements with the ex vivo test. In conclusion, we validated a patient-specific computer model of an entire organ bone-implant system at the tissue-level at high resolution with excellent overall accuracy. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:954-962, 2018.

In vivo study of a bioactive nanoparticle-gelatin composite scaffold for bone defect repair in rabbits

The purpose is to study the in vivo bioactivity of this scaffold and verify its ability to simulate the characteristics of cancellous bone. Twenty-four adult New Zealand white rabbits were divided into three groups. Bone defects above the femoral condylar of both sides were created. A newly designed bioactive nanoparticle-gelatin composite scaffold was implanted to the experimental side, while the control side was left without implantation. The repair of bone defect was monitored by X-ray examination, gross observation, Micro-CT examination and histological observation of the area of bone defect 4, 8 and 12 weeks after surgery. There was void of new bone tissue in medullary cavity in the bone defect area of the control side. In the experimental side, the composite scaffold displayed excellent biodegradability, bioactivity and cyto-compatibility. With the time laps, new bone tissue grew from the edge to center as revealed by both Micro-CT image and staining biopsy, which complies with the "creeping substitution" process. The mechanical properties of the newly designed bioactive nanoparticle-gelatin composite scaffold and the 3-D structure of new bone tissue are comparable to the surrounding cancellous bones. This newly developed bioactive nanoparticle-gelatin composite scaffold possesses good biocompatibility and in vivo osteogenic capability for bone defect repair. It may be a promising artificial bone grafts.

Neutron tomographic imaging of bone-implant interface: Comparison with X-ray tomography

Metal implants, in e.g. joint replacements, are generally considered to be a success. As mechanical stability is important for the longevity of a prosthesis, the biological reaction of the bone to the mechanical loading conditions after implantation and during remodelling determines its fate. The bone reaction at the implant interface can be studied using high-resolution imaging. However, commonly used X-ray imaging suffers from image artefacts in the close proximity of metal implants, which limit the possibility to closely examine the bone at the bone-implant interface. An alternative ex vivo 3D imaging method is offered by neutron tomography. Neutrons interact with matter differently than X-rays; therefore, this study explores if neutron tomography may be used to enrich studies on bone-implant interfaces. A stainless steel screw was implanted in a rat tibia and left to integrate for 6weeks. After extracting the tibia, the bone-screw construct was imaged using X-ray and neutron tomography at different resolutions. Artefacts were visible in all X-ray images in the close proximity of the implant, which limited the ability to accurately quantify the bone around the implant. In contrast, neutron images were free of metal artefacts, enabling full analysis of the bone-implant interface. Trabecular structural bone parameters were quantified in the metaphyseal bone away from the implant using all imaging modalities. The structural bone parameters were similar for all images except for the lowest resolution neutron images. This study presents the first proof-of-concept that neutron tomographic imaging can be used for ex-vivo evaluation of bone microstructure and that it constitutes a viable, new tool to study the bone-implant interface tissue remodelling.

Aging, Osteocytes, and Mechanotransduction

PURPOSE OF REVIEW

The bone is able to adapt its structure to mechanical signals via the bone remodeling process governed by mechanosensitive osteocytes. With aging, an imbalance in bone remodeling results in osteoporosis. In this review, we hypothesized that changes in lacunar morphology underlie the decreased bone mechanoresponsiveness to mechanical loading with aging.

RECENT FINDINGS

Several studies have reported considerable variations in the shape of osteocytes and their lacunae with aging. Since osteocytes can sense matrix strain directly via their cell bodies, the variations in osteocyte morphology may cause changes in osteocyte mechanosensitivity. As a consequence, the load-adaptive response of osteocytes may change with aging, even when mechanical loading would remain unchanged. Though extensive quantitative data is lacking, evidence exists that the osteocyte lacunae are becoming smaller and more spherical with aging. Future dedicated studies might reveal whether these changes would affect osteocyte mechanosensation and the subsequent biological response, and whether this is (one of) the pathways involved in age-related bone loss.

Accuracy and reproducibility of mouse cortical bone microporosity as quantified by desktop microcomputed tomography

Bone's microporosity plays important roles in bone biology and bone mechanical quality. In this study, we explored the accuracy and reproducibility of nondestructive desktop μCT for 3D visualization and subsequent morphometric analysis of mouse cortical bone microporosity including the vascular canal network and osteocyte lacunae. The accuracy of measurements was evaluated in five murine fibula using confocal laser scanning microscopy (CLSM) in conjunction with Fluorescein isothiocyanate (FITC) staining as the reference method. The reproducibility of μCT-derived cortical bone microstructural indices was examined in 10 fibulae of C57Bl/6J male mice at a nominal resolution of 700 nanometer. Three repeated measurements were made on different days. An excellent correlation between μCT and CLSM was observed for both mean lacuna volume (r = 0.98, p = 0.002) and for mean lacuna orientation (r = 0.93, p = 0.02). Whereas the two techniques showed no significant differences for these parameters, the mean lacuna sphericity acquired from μCT was significantly higher than CLSM (p = 0.01). Reproducibility was high, with precision errors (PE) of 1.57-4.69% for lacuna parameters, and of 1.01-9.45% for vascular canal parameters. Intraclass correlation coefficient (ICC) showed a high reliability of the measurements, ranging from 0.998-1.000 for cortical parameters, 0.973-0.999 for vascular canal parameters and 0.755-0.991 for lacuna parameters. In conclusion, desktop μCT is a valuable tool to quantify the 3D characteristics of bone vascular canals as well as lacunae which can be applied to intact murine bones with high accuracy and reproducibility. Thus, μCT might be an important tool to improve our understanding of the physiological and biomechanical significance of these cannular and lacunar structure in cortical bone.

A robust methodology for the quantitative assessment of the rat jawbone microstructure

Micro-computed tomography can be applied for the assessment of the micro-architectural characteristics of the cortical and trabecular bones in either physiological or disease conditions. However, reports often lack a detailed description of the methodological steps used to analyse these images, such as the volumes of interest, the algorithms used for image filtration, the approach used for image segmentation, and the bone parameters quantified, thereby making it difficult to compare or reproduce the studies. This study addresses this critical need and aims to provide standardized assessment and consistent parameter reporting related to quantitative jawbone image analysis. Various regions of the rat jawbones were screened for their potential for standardized micro-computed tomography analysis. Furthermore, the volumes of interest that were anticipated to be most susceptible to bone structural changes in response to experimental interventions were defined. In the mandible, two volumes of interest were selected, namely, the condyle and the trabecular bone surrounding the three molars. In the maxilla, the maxillary tuberosity region and the inter-radicular septum of the second molar were considered as volumes of interest. The presented protocol provides a standardized and reproducible methodology for the analysis of relevant jawbone volumes of interest and is intended to ensure global, accurate, and consistent reporting of its morphometry. Furthermore, the proposed methodology has potential, as a variety of rodent animal models would benefit from its implementation.

Atomic scale chemical tomography of human bone

Human bone is a complex hierarchical material. Understanding bone structure and its corresponding composition at the nanometer scale is critical for elucidating mechanisms of biomineralization under healthy and pathological states. However, the three-dimensional structure and chemical nature of bone remains largely unexplored at the nanometer scale due to the challenges associated with characterizing both the structural and chemical integrity of bone simultaneously. Here, we use correlative transmission electron microscopy and atom probe tomography for the first time, to our knowledge, to reveal structures in human bone at the atomic level. This approach provides an overlaying chemical map of the organic and inorganic constituents of bone on its structure. This first use of atom probe tomography on human bone reveals local gradients, trace element detection of Mg, and the co-localization of Na with the inorganic-organic interface of bone mineral and collagen fibrils, suggesting the important role of Na-rich organics in the structural connection between mineral and collagen. Our findings provide the first insights into the hierarchical organization and chemical heterogeneity in human bone in three-dimensions at its smallest length scale – the atomic level. We demonstrate that atom probe tomography shows potential for new insights in biomineralization research on bone.

Ex vivo loading of trussed implants for spine fusion induces heterogeneous strains consistent with homeostatic bone mechanobiology

A truss structure was recently introduced as an interbody fusion cage. As a truss system, some of the connected elements may be in a state of compression and others in tension. This study aimed to quantify both the mean and variance of strut strains in such an implant when loaded in a simulated fusion condition with vertebral body or contoured plastic loading platens ex vivo. Cages were each instrumented with 78 fiducial spheres, loaded between platens (vertebral body or contoured plastic), imaged using high resolution micro-CT, and analyzed for deformation and strain of each of the 221 struts. With repeated loading of a cage by vertebral platens, the distribution (variance, indicated by SD) of strut strains widened from 50N control (4±114με, mean±SD) to 1000N (-23±273με) and 2000N (-48±414με), and between 1000N and 2000N. With similar loading of multiple cages, the strain distribution at 2000N (23±389με) increased from 50N control. With repeated loading by contoured plastic platens, induced strains at 2000N had a distribution similar to that induced by vertebral platens (84±426με). In all studies, cages exhibited increases in strut strain amplitude when loaded from 50N to 1000N or 2000N. Correspondingly, at 2000N, 59-64% of struts exhibited strain amplitudes consistent with mechanobiologically-regulated bone homeostasis. At 2000N, vertically-oriented struts exhibited deformation of -2.87±2.04μm and strain of -199±133με, indicating overall cage compression. Thus, using an ex vivo 3-D experimental biomechanical analysis method, a truss implant can have strains induced by physiological loading that are heterogeneous and of amplitudes consistent with mechanobiological bone homeostasis.

Cortical Bone Porosity: What Is It, Why Is It Important, and How Can We Detect It?

There is growing recognition of the role of micro-architecture in osteoporotic bone loss and fragility. This trend has been driven by advances in imaging technology, which have enabled a transition from measures of mass to micro-architecture. Imaging trabecular bone has been a key research focus, but advances in resolution have also enabled the detection of cortical bone micro-architecture, particularly the network of vascular canals, commonly referred to as 'cortical porosity.' This review aims to provide an overview of what this level of porosity is, why it is important, and how it can be characterized by imaging. Moving beyond a 'trabeculocentric' view of bone loss holds the potential to improve diagnosis and monitoring of interventions. Furthermore, cortical porosity is intimately linked to the remodeling process, which underpins bone loss, and thus a larger potential exists to improve our fundamental understanding of bone health through imaging of both humans and animal models.

High-fat diet induced changes in lumbar vertebra of the male rat offsprings

In obesity, bone marrow adiposity increases and proinflammatory cytokines excretion activates RANK/RANKL/OPG system, which leads to increased bone resorption. The aim of this study was to analyze trabecular and cortical bone parameters in animals exposed to the high-fat diet in utero and after lactation. Skeletal organ of interest was the fifth lumbar vertebra, which is not exposed to biomechanical loading in rats. Further aims were to determine TNF-α and IL-6 serum concentrations, and the intensity of the TNF-α immunohistochemical staining in the bone marrow. Ten female Sprague Dawley rats, nine weeks old, were randomly divided in two groups and fed either standard laboratory chow or food rich in saturated fatty acids during five weeks, and then mated with genetically similar male subjects. After birth and lactation male offsprings from both groups were divided in four subgroups depending on the diet they were fed until twenty-two weeks of age. The highest cholesterol and triglyceride concentration were found in both groups of offsprings fed with high-fat diet. The lowest trabecular bone volume, lowest trabecular number and highest trabecular separation were found in offsprings fed with high-fat diet of mothers on standard laboratory chow. The same group of offsprings was also characterized by the highest intensity of TNF-α immunostaining in the bone marrow and the highest TNF-α serum concentration, which suggest that this proinflammatory cytokine has interfered with bone metabolism, possibly by stimulation of bone resorption, which led to inadequate trabecular bone development and bone modeling of the fifth lumbar vertebra.