Translocation of an RNA duplex on a ribozyme

Single-molecule kinetics reveal cation-promoted DNA duplex formation through ordering of single-stranded helices

In this work, the kinetics of short, fully complementary oligonucleotides are investigated at the single-molecule level. Constructs 6-9 bp in length exhibit single exponential kinetics over 2 orders of magnitude time for both forward (kon, association) and reverse (koff, dissociation) processes. Bimolecular rate constants for association are weakly sensitive to the number of basepairs in the duplex, with a 2.5-fold increase between 9 bp (k'on = 2.1(1) × 10(6) M(-1) s(-1)) and 6 bp (k'on = 5.0(1) × 10(6) M(-1) s(-1)) sequences. In sharp contrast, however, dissociation rate constants prove to be exponentially sensitive to sequence length, varying by nearly 600-fold over the same 9 bp (koff = 0.024 s(-1)) to 6 bp (koff = 14 s(-1)) range. The 8 bp sequence is explored in more detail, and the NaCl dependence of kon and koff is measured. Interestingly, kon increases by >40-fold (kon = 0.10(1) s(-1) to 4.0(4) s(-1) between [NaCl] = 25 mM and 1 M), whereas in contrast, koff decreases by fourfold (0.72(3) s(-1) to 0.17(7) s(-1)) over the same range of conditions. Thus, the equilibrium constant (Keq) increases by ≈160, largely due to changes in the association rate, kon. Finally, temperature-dependent measurements reveal that increased [NaCl] reduces the overall exothermicity (ΔΔH° > 0) of duplex formation, albeit by an amount smaller than the reduction in entropic penalty (-TΔΔS° < 0). This reduced entropic cost is attributed to a cation-facilitated preordering of the two single-stranded species, which lowers the association free-energy barrier and in turn accelerates the rate of duplex formation.

Propensities for loop structures of RNA & DNA backbones

RNA oligonucleotides exhibit a large tendency to bend and form a loop conformation which is a major motif contributing to their complex three-dimensional structure. This is in contrast to DNA molecules that predominantly form the double-helix structure. In this paper we investigate by molecular dynamics simulation, as well as, by its combination with the replica-exchange method, the propensity of RNA chains containing the GCUAA pentaloop to form spontaneously a hairpin conformation. The results were then compared with those of analogous hybrid oligonucleotides in which the ribose groups in the loop-region were substituted by deoxyriboses. We find that the RNA oligomers exhibit a marginal excess stability to form loop structures. The equilibrium constant for opening the loop to an extended conformation is twice as large in the hybrid than it is in the RNA chain. Analyses of the hydrogen bonds indicate that the excess stability for forming a hairpin is a result of hydrogen bonds the 2'-hydroxyls in the loop region form with other groups in the loop. Of these hydrogen bonds, the most important is the hydrogen bond donated from the 2'-OH at the first position of the loop to N7 of adenine at the forth position. RNA and DNA backbones are characterized by different backbone dihedral angles and sugar puckering that can potentially facilitate or hamper the hydrogen bonds involving the 2'-OH. Nevertheless, the sugar puckerings of all the pentaloop nucleotides were not significantly different between the two chains displaying the C3'-endo conformation characteristic to the A-form double helix. All of the other backbone dihedrals also did not show any considerable difference in the loop-region except of the δ-dihedral. In this case, the RNA loop exhibited bimodal distributions corresponding to, both, the RNA and DNA backbones, whereas the loop of the hybrid chain behaved mostly as that of a DNA backbone. Thus, it is possible that the behavior of the δ-dihedrals in the loop-region of the RNA adopts conformations that facilitate the intra-nucleotide hydrogen bondings of the 2'-hydroxyls, and consequently renders loop structures in RNA more stable.

Ribose 2'-Hydroxyl Groups Stabilize RNA Hairpin Structures Containing GCUAA Pentaloop

The chemical structure of RNA and DNA is very similar; however, the three-dimensional conformation of these two nucleic acids is very different. Whereas the DNA adopts a repetitive structure of a double-stranded helix, RNA is primarily single stranded with a complex three-dimensional structure in which the hairpin is the most common secondary structure. Apart from the difference between uracil and thymine, the difference in the chemical structure between RNA and DNA is the presence of a hydroxyl group at position 2' of the sugar (ribose) instead of a hydrogen (deoxyribose). In this paper, we present molecular dynamics simulations addressing the contribution of 2'-hydroxyls to the stability of a GCUAA pentaloop motif. The results indicate that the 2'-hydroxyls stabilize the hairpin conformation of the GCUAA pentaloop relative to an analogous oligonucleotide in which the ribose sugars in the loop region were substituted with deoxyriboses. The magnitude of the stabilization was found to be 23.8 ± 4.1 kJ/mol using an alchemical mutations free energy method and 4.2 ± 6.5 kJ/mol using potential of mean force calculations. The latter indicates that in addition to its larger thermodynamic stability the RNA hairpin is also kinetically more stable. We find that the excess stability is a result of intrahairpin hydrogen bonds in the loop region between the 2'-hydroxyls and sugars, bases, and phosphates. The hydrogen bonds with the sugars and phosphates involve predominantly interactions with adjacent nucleotides. However, the hydrogen bonds with the bases involve also interactions between groups on opposite sides of the loop or with the middle base of the loop and are therefore likely to contribute significantly to the stability of the loop. Of these hydrogen bonds, the most frequent is observed between the 2'-hydroxyl at the first position of the pentaloop with N6/N7 of adenine at the forth position, as well as between the 2'-hydroxyl at position -1 with N6 of adenine at the fifth position. Our results contribute to the notion that one of the important roles of the ribose sugars in RNA is to facilitate hairpin formation.

Triple-helix structure in telomerase RNA contributes to catalysis

Telomerase is responsible for replication of the ends of linear chromosomes in most eukaryotes. Its intrinsic RNA subunit provides the template for synthesis of telomeric DNA by the reverse-transcriptase (TERT) subunit and tethers other proteins into the ribonucleoprotein (RNP) complex. We report that a phylogenetically conserved triple helix within a pseudoknot structure of this RNA contributes to telomerase activity but not by binding the TERT protein. Instead, 2'-OH groups protruding from the triple helix participate in both yeast and human telomerase catalysis; they may orient the primer-template relative to the active site in a manner analogous to group I ribozymes. The role of RNA in telomerase catalysis may have been acquired relatively recently or, alternatively, telomerase may be a molecular fossil representing an evolutionary link between RNA enzymes and RNP enzymes.

Molecular modelling of the GIR1 branching ribozyme gives new insight into evolution of structurally related ribozymes

Twin-ribozyme introns contain a branching ribozyme (GIR1) followed by a homing endonuclease (HE) encoding sequence embedded in a peripheral domain of a group I splicing ribozyme (GIR2). GIR1 catalyses the formation of a lariat with 3 nt in the loop, which caps the HE mRNA. GIR1 is structurally related to group I ribozymes raising the question about how two closely related ribozymes can carry out very different reactions. Modelling of GIR1 based on new biochemical and mutational data shows an extended substrate domain containing a GoU pair distinct from the nucleophilic residue that dock onto a catalytic core showing a different topology from that of group I ribozymes. The differences include a core J8/7 region that has been reduced and is complemented by residues from the pre-lariat fold. These findings provide the basis for an evolutionary mechanism that accounts for the change from group I splicing ribozyme to the branching GIR1 architecture. Such an evolutionary mechanism can be applied to other large RNAs such as the ribonuclease P.

Probing the role of a secondary structure element at the 5'- and 3'-splice sites in group I intron self-splicing: the tetrahymena L-16 ScaI ribozyme reveals a new role of the G.U pair in self-splicing

Several ribozyme constructs have been used to dissect aspects of the group I self-splicing reaction. The Tetrahymena L-21 ScaI ribozyme, the best studied of these intron analogues, catalyzes a reaction analogous to the first step of self-splicing, in which a 5'-splice site analogue (S) and guanosine (G) are converted into a 5'-exon analogue (P) and GA. This ribozyme preserves the active site but lacks a short 5'-terminal segment (called the IGS extension herein) that forms dynamic helices, called the P1 extension and P10 helix. The P1 extension forms at the 5'-splice site in the first step of self-splicing, and P10 forms at the 3'-splice site in the second step of self-splicing. To dissect the contributions from the IGS extension and the helices it forms, we have investigated the effects of each of these elements at each reaction step. These experiments were performed with the L-16 ScaI ribozyme, which retains the IGS extension, and with 5'- and 3'-splice site analogues that differ in their ability to form the helices. The presence of the IGS extension strengthens binding of P by 40-fold, even when no new base pairs are formed. This large effect was especially surprising, as binding of S is essentially unaffected for S analogues that do not form additional base pairs with the IGS extension. Analysis of a U.U pair immediately 3' to the cleavage site suggests that a previously identified deleterious effect from a dangling U residue on the L-21 ScaI ribozyme arises from a fortuitous active site interaction and has implications for RNA tertiary structure specificity. Comparisons of the affinities of 5'-splice site analogues that form only a subset of base pairs reveal that inclusion of the conserved G.U base pair at the cleavage site of group I introns destabilizes the P1 extension >100-fold relative to the stability of a helix with all Watson-Crick base pairs. Previous structural data with model duplexes and the recent intron structures suggest that this effect can be attributed to partial unstacking of the P1 extension at the G.U step. These results suggest a previously unrecognized role of the G.U wobble pair in self-splicing: breaking cooperativity in base pair formation between P1 and the P1 extensions. This effect may facilitate replacement of the P1 extension with P10 after the first chemical step of self-splicing and release of the ligated exons after the second step of self-splicing.

Molecular recognition properties of IGS-mediated reactions catalyzed by a Pneumocystis carinii group I intron

We report the development, analysis and use of a new combinatorial approach to analyze the substrate sequence dependence of the suicide inhibition, cyclization, and reverse cyclization reactions catalyzed by a group I intron from the opportunistic pathogen Pneumocystis carinii. We demonstrate that the sequence specificity of these Internal Guide Sequence (IGS)-mediated reactions is not high. In addition, the sequence specificity of suicide inhibition decreases with increasing MgCl(2) concentration, reverse cyclization is substantially more sequence specific than suicide inhibition, and multiple reverse cyclization products occur, in part due to the formation of multiple cyclization intermediates. Thermodynamic analysis reveals that a base pair at position -4 of the resultant 5' exon-IGS (P1) helix is crucial for tertiary docking of the P1 helix into the catalytic core of the ribozyme in the suicide inhibition reaction. In contrast to results reported with a Tetrahymena ribozyme, altering the sequence of the IGS of the P.carinii ribozyme can result in a marked reduction in tertiary stability of docking the resultant P1 helix into the catalytic core of the ribozyme. Finally, results indicate that RNA targeting strategies which exploit tertiary interactions could have low specificity due to the tolerance of mismatched base pairs.

RNA-catalyzed RNA ligation on an external RNA template

Variants of the hc ligase ribozyme, which catalyzes ligation of the 3' end of an RNA substrate to the 5' end of the ribozyme, were utilized to evolve a ribozyme that catalyzes ligation reactions on an external RNA template. The evolved ribozyme catalyzes the joining of an oligonucleotide 3'-hydroxyl to the 5'-triphosphate of an RNA hairpin molecule. The ribozyme can also utilize various substrate sequences, demonstrating a largely sequence-independent mechanism for substrate recognition. The ribozyme also carries out the ligation of two oligonucleotides that are bound at adjacent positions on a complementary template. Finally, it catalyzes addition of mononucleoside 5'-triphosphates onto the 3' end of an oligonucleotide primer in a template-dependent manner. The development of ribozymes that catalyze polymerase-type reactions contributes to the notion that an RNA world could have existed during the early history of life on Earth.

A chemical phylogeny of group I introns based upon interference mapping of a bacterial ribozyme

Despite its small size, the 205 nt group I intron from Azoarcus tRNA(Ile) is an exceptionally stable self-splicing RNA. This IC3 class intron retains the conserved secondary structural elements common to group I ribozymes, but lacks several peripheral helices. These features make it an ideal system to establish the conserved chemical basis of group I intron activity. We collected nucleotide analog interference mapping (NAIM) data of the Azoarcus intron using 14 analogs that modified the phosphate backbone, the ribose sugar, or the purine base functional groups. In conjunction with a complete interference set collected on the Tetrahymena group I intron (IC1 class), these data define a "chemical phylogeny" of functional groups that are important for the activity of both introns and that may be common chemical features of group I intron catalysts. The data identify the functional moieties most likely to play a conserved role as ligands for catalytic metal ions, the substrate helix, and the guanosine cofactor. These include backbone functional groups whose nucleotide identity is not conserved, and hence are difficult to identify by standard phylogenetic sequence comparisons. The data suggest that both introns utilize an equivalent set of long range tertiary interactions for 5'-splice site selection between the P1 substrate helix and its receptor in the J4/5 asymmetric bulge, as well as an equivalent set of 2'-OH groups for P1 helix docking into most of the single stranded segment J8/7. However, the Azoarcus intron appears to make an alternative set of interactions at the base of the P1 helix and at the 5'-end of the J8/7. Extensive differences were observed within the intron peripheral domains, particularly in P2 and P8 where the Azoarcus data strongly support the proposed formation of a tetraloop-tetraloop receptor interaction. This chemical phylogeny for group I intron catalysis helps to refine structural models of the RNA active site and identifies functional groups that should be carefully investigated for their role in transition state stabilization.

Ribozyme chemogenetics

In this review I will outline several chemogenetic approaches used to determine the chemical basis of large ribozyme function and structure. The term chemogenetics was first used to describe site-specific functional group modification experiments in the analysis of DNA-protein interactions. Within the past few years equivalent experiments have been performed on large catalytic RNAs using both single-site substitution and interference mapping techniques with nucleotide analogues. While functional group mutagenesis is an important aspect of a chemogenetic approach, chemical correlates to genetic revertants and suppressors must also be realized for the genetic analogy to be intellectually valid and experimentally useful. Several examples of functional group revertants and suppressors have now been obtained within the Tetrahymena group I ribozyme. These experiments define an ensemble of tertiary hydrogen bonds that have made it possible to construct a detailed model of the ribozyme catalytic core. The model includes a functionally important monovalent metal ion binding site, a wobble-wobble receptor motif for helix-helix packing interactions, and a minor groove triple helix.

The P5abc peripheral element facilitates preorganization of the tetrahymena group I ribozyme for catalysis

Phylogenetic comparisons and site-directed mutagenesis indicate that group I introns are composed of a catalytic core that is universally conserved and peripheral elements that are conserved only within intron subclasses. Despite this low overall conservation, peripheral elements are essential for efficient splicing of their parent introns. We have undertaken an in-depth structure-function analysis to investigate the role of one of these elements, P5abc, using the well-characterized ribozyme derived from the Tetrahymena group I intron. Structural comparisons using solution-based free radical cleavage revealed that a ribozyme lacking P5abc (E(DeltaP5abc)) and E(DeltaP5abc) with P5abc added in trans (E(DeltaP5abc).P5abc) adopt a similar global tertiary structure at Mg(2+) concentrations greater than 20 mM [Doherty, E. A., et al. (1999) Biochemistry 38, 2982-90]. However, free E(DeltaP5abc) is greatly compromised in overall oligonucleotide cleavage activity, even at Mg(2+) concentrations as high as 100 mM. Further characterization of E(DeltaP5abc) via DMS modification revealed local structural differences at several positions in the conserved core that cluster around the substrate binding sites. Kinetic and thermodynamic dissection of individual reaction steps identified defects in binding of both substrates to E(DeltaP5abc), with > or =25-fold weaker binding of a guanosine nucleophile and > or =350-fold weaker docking of the oligonucleotide substrate into its tertiary interactions with the ribozyme core. These defects in binding of the substrates account for essentially all of the 10(4)-fold decrease in overall activity of the deletion mutant. Together, the structural and functional observations suggest that the P5abc peripheral element not only provides stability but also positions active site residues through indirect interactions, thereby preferentially stabilizing the active ribozyme structure relative to alternative less active states. This is consistent with the view that peripheral elements engage in a network of mutually reinforcing interactions that together ensure cooperative folding of the ribozyme to its active structure.

A hydrogen-bonding triad stabilizes the chemical transition state of a group I ribozyme

BACKGROUND

The group I intron is an RNA enzyme capable of efficiently catalyzing phosphoryl-transfer reactions. Functional groups that stabilize the chemical transition state of the cleavage reaction have been identified, but they are all located within either the 5'-exon (P1) helix or the guanosine cofactor, which are the substrates of the reaction. Functional groups within the ribozyme active site are also expected to assist in transition-state stabilization, and their role must be explored to understand the chemical basis of group I intron catalysis.

RESULTS

Using nucleotide analog interference mapping and site-specific functional group substitution experiments, we demonstrate that the 2'-OH at A207, a highly conserved nucleotide in the ribozyme active site, specifically stabilizes the chemical transition state by approximately 2 kcal mol-1. The A207 2'-OH only makes its contribution when the U(-1) 2'-OH immediately adjacent to the scissile phosphate is present, suggesting that the 2'-OHs of A207 and U(-1) interact during the chemical step.

CONCLUSIONS

These data support a model in which the 3'-oxyanion leaving group of the transesterification reaction is stabilized by a hydrogen-bonding triad consisting of the 2'-OH groups of U(-1) and A207 and the exocyclic amine of G22. Because all three nucleotides occur within highly conserved non-canonical base pairings, this stabilization mechanism is likely to occur throughout group I introns. Although this mechanism utilizes functional groups distinctive of RNA enzymes, it is analogous to the transition states of some protein enzymes that perform similar phosphoryl-transfer reactions.

Antibiotic inhibition of RNA catalysis: neomycin B binds to the catalytic core of the td group I intron displacing essential metal ions

The aminoglycoside antibiotic neomycin B induces misreading of the genetic code during translation and inhibits several ribozymes. The self-splicing group I intron derived from the T4 phage thymidylate synthase (td) gene is one of these. Here we report how neomycin B binds to the intron RNA inhibiting splicing in vitro. Footprinting experiments identified two major regions of protection by neomycin B: one in the internal loop between the stems P4 and P5 and the other in the catalytic core close to the G-binding site. Mutational analyses defined the latter as the inhibitory site. Splicing inhibition is strongly dependent on pH and Mg2+ concentration, suggesting electrostatic interactions and competition with divalent metal ions. Fe2+-induced hydroxyl radical (Fe-OH.) cleavage of the RNA backbone was used to monitor neomycin-mediated changes in the proximity of the metal ions. Neomycin B protected several positions in the catalytic core from Fe-OH. cleavage, suggesting that metal ions are displaced in the presence of the antibiotic. Mutation of the bulged nucleotide in the P7 stem, a position which is strongly protected by neomycin B from Fe-OH. cleavage and which has been proposed to be involved in binding an essential metal ion, renders splicing resistant to neomycin. These results allowed the docking of neomycin to the core of the group I intron in the 3D model.

Tertiary structure formation in the hairpin ribozyme monitored by fluorescence resonance energy transfer

The complex formed by the hairpin ribozyme and its substrate consists of two independently folding domains which interact to form a catalytic structure. Fluorescence resonance energy transfer methods permit us to study reversible transitions of the complex between open and closed forms. Results indicate that docking of the domains is required for both the cleavage and ligation reactions. Docking is rate-limiting for ligation (2 min-1) but not for cleavage, where docking (0.5 min-1) precedes a rate-limiting conformational transition or slow-reaction chemistry. Strikingly, most modifications to the RNA (such as a G+1A mutation in the substrate) or reaction conditions (such as omission of divalent metal ion cofactors) which inhibit catalysis do so by preventing docking. This demonstrates directly that mutations and modifications which inhibit a step following substrate binding are not necessarily involved in catalysis. An improved kinetic description of the catalytic cycle is derived, including specific structural transitions.

Complementary sets of noncanonical base pairs mediate RNA helix packing in the group I intron active site

Helix packing is critical for RNA tertiary structure formation, although the rules for helix-helix association within structured RNAs are largely unknown. Docking of the substrate helix into the active site of the Tetrahymena group I ribozyme provides a model system to study this question. Using a novel chemogenetic method to analyze RNA structure in atomic detail, we report that complementary sets of noncanonical base pairs (a G.U wobble pair and two consecutively stacked sheared A.A pairs) create an RNA helix packing motif that is essential for 5'-splice site selection in the group I intron. This is likely to be a general motif for helix-helix interaction within the tertiary structures of many large RNAs.

RNA seeing double: close-packing of helices in RNA tertiary structure

Structured RNA molecules play essential roles in RNA processing, chromosome maintenance and protein biosynthesis. RNA necessarily uses different strategies than proteins for folding and assembly of complex architectures. The RNA-folding problem is largely an issue of helical packing: how does RNA organize and pack short, double-helical segments to produce active sites and recognition motifs for proteins? Noncanonical base pairs, metal ions and 2'-hydroxyl groups are key elements in RNA higher-order structure formation.

Long-range interaction between the P2.1 and P9.1 peripheral domains of the Tetrahymena ribozyme

The Tetrahymena ribozyme possesses peripheral domains, termed P9.1 and P9.2. They are nonessential in the mechanism of the catalytic reaction but contribute to enhance the catalytic activity of the ribozyme. It has been postulated that P9.1 is capable of forming Watson-Crick base pairings with another peripheral domain, P2.1. We report here the existence of long-range base pairings between the loop regions of these two domains and show that this interaction apparently plays a role in enhancing the catalytic activity of the ribozyme.

Mechanistic aspects of enzymatic catalysis: lessons from comparison of RNA and protein enzymes

A classic approach in biology, both organismal and cellular, is to compare morphologies in order to glean structural and functional commonalities. The comparative approach has also proven valuable on a molecular level. For example, phylogenetic comparisons of RNA sequences have led to determination of conserved secondary and even tertiary structures, and comparisons of protein structures have led to classifications of families of protein folds. Here we take this approach in a mechanistic direction, comparing protein and RNA enzymes. The aim of comparing RNA and protein enzymes is to learn about fundamental physical and chemical principles of biological catalysis. The more recently discovered RNA enzymes, or ribozymes, provide a distinct perspective on long-standing questions of biological catalysis. The differences described in this review have taught us about the aspects of RNA and proteins that are distinct, whereas the common features have helped us to understand the aspects that are fundamental to biological catalysis. This has allowed the framework that was put forth by Jencks for protein catalysts over 20 years ago (1) to be extended to RNA enzymes, generalized, and strengthened.

New loop-loop tertiary interactions in self-splicing introns of subgroup IC and ID: a complete 3D model of the Tetrahymena thermophila ribozyme

BACKGROUND

Group I introns self-splice via two consecutive trans-esterification reactions in the presence of guanosine cofactor and magnesium ions. Comparative sequence analysis has established that a catalytic core of about 120 nucleotides is conserved in all known group I introns. This core is generally not sufficient for activity, however, and most self-splicing group I introns require non-conserved peripheral elements to stabilize the complete three-dimensional (3D) structure. The physico-chemical properties of group I introns make them excellent systems for unraveling the structural basis of the RNA-RNA interactions responsible for promoting the self-assembly of complex RNAs.

RESULTS

We present phylogenetic and experimental evidence for the existence of three additional tertiary base pairings between hairpin loops within peripheral components of subgroup IC1 and ID introns. Each of these new long range interactions, called P13, P14 and P16, involves a terminal loop located in domain 2. Although domains 2 of IC and ID introns share very strong sequence similarity, their terminal loops interact with domains 5 and 9 (subgroup IC1) and domain 6 (subgroup ID). Based on these tertiary contacts, comparative sequence analysis, and published experimental results such as Fe(II)-EDTA protection patterns, we propose 3D models for two entire group I introns, the subgroup IC1 intron in the large ribosomal precursor RNA of Tetrahymena thermophila and the SdCob.1 subgroup ID intron found in the cytochrome b gene of Saccharomyces douglasii.

CONCLUSIONS

Three-dimensional models of group I introns belonging to four different subgroups are now available. They all emphasize the modular and hierarchical organization of the architecture of group I introns and the widespread use of base-pairings between terminal hairpin loops for stabilizing the folded and active structures of large and complex RNA molecules.

Molecular evolution of transfer RNA from two precursor hairpins: implications for the origin of protein synthesis

In this paper we are going to present a model for the coevolution of major components of the protein synthesis machinery in a primordial RNA world. We propose that the essential prerequisites for RNA-based protein synthesis, i.e., tRNA-like molecules, ribozymic charging catalysts, small-subunit(SSU) rRNA, and large-subunit(LSU) rRNA, evolved from the same ancestral RNA molecule. Several arguments are considered which suggest that tRNA-like molecules were derived by tandem joining of template-flanking hairpin structures involved in replication control. It is further argued that the ancestors of contemporary group I tRNA introns catalyzed such hairpin joining reactions, themselves also giving rise to the ribosomal RNAs. Our model includes a general stereochemical principle for the interaction between ribozymes and hairpin-derived recognition structures, which can be applied to such seemingly different processes as RNA polymerization, aminoacylation, tRNA decoding, and peptidyl transfer, implicating a common origin for these fundamental functions. These and other considerations suggest that generation and evolution of tRNA were coupled to the evolution of synthetases, ribosomal RNAs, and introns from the beginning and have been a consequence arising from the original function of tRNA precursor hairpins as replication and recombination control elements.

RNA folding

The number of known motifs for RNA folding and RNA tertiary organization is expanding rapidly as we learn more about the diverse biological functions of RNA. Problems in protein and RNA folding have melded in recent investigations of ribonucleoprotein folding. Theoretical and experimental models are rapidly being developed for the pathways and stabilizing forces involved in RNA folding.

Use of binding energy by an RNA enzyme for catalysis by positioning and substrate destabilization

A fundamental catalytic principle for protein enzymes in the use of binding interactions away from the site of chemical transformation for catalysis. We have compared the binding and reactivity of a series of oligonucleotide substrates and products of the Tetrahymena ribozyme, which catalyzes a site-specific phosphodiester cleavage reaction: CCCUCUpA+G<-->CCCUCU-OH+GpA. The results suggest that this RNA enzyme, like protein enzymes, can utilize binding interactions to achieve substantial catalysis via entropic fixation and substrate destabilization. The stronger binding of the all-ribose oligonucleotide product compared to an analog with a terminal 3' deoxyribose residue gives an effective concentration of 2200 M for the 3' hydroxyl group, a value approaching those obtained with protein enzymes and suggesting the presence of a structurally well defined active site capable of precise positioning. The stabilization from tertiary binding interactions is 40-fold less for the oligonucleotide substrate than the oligonucleotide product, despite the presence of the reactive phosphoryl group in the substrate. This destabilization is accounted for by a model in which tertiary interactions away from the site of bond cleavage position the electron-deficient 3' bridging phosphoryl oxygen of the oligonucleotide substrate next to an electropositive Mg ion. As the phosphodiester bond breaks and this 3' oxygen atom develops a negative charge in the transition state, the weak interaction of the substrate with Mg2+ becomes strong. These strategies of "substrate destabilization" and "transition state stabilization" provide estimated rate enhancements of approximately 280- and approximately 60-fold, respectively. Analogous substrate destabilization by a metal ion or hydrogen bond donor may be used more generally by RNA and protein enzymes catalyzing reactions of phosphate esters.

Divalent metal ion binding to a conserved wobble pair defining the upstream site of cleavage of group I self-splicing introns

The upstream site of cleavage of all group I self-splicing introns is identified by an absolutely conserved U.G base pair. Although a wobble C.A pair can substitute the U.G pair, all other combinations of nucleotides at this position abolish splicing, suggesting that it is an unusual RNA structure, rather than sequence, that is recognized by the catalytic intron core. RNA enzymes are metalloenzymes, and divalent metal ion binding may be an important requirement for splice site recognition and catalysis. The paramagnetic broadening of NMR resonances upon manganese binding at specific sites was used to probe the interaction between divalent metal ions and an oligonucleotide model of a group I intron ribozyme substrate. Unlike previous studies in which only imino proton resonances were monitored, we have used isotopically labelled RNA and a set of complete spectral assignments to identify the location of the divalent metal binding site with much greater detail than previously possible. Two independent metal binding sites were identified for this oligonucleotide. A first metal binding site is located in the major groove of the three consecutive G.C base pairs at the end of double helical stem. A second site is found in the major groove of the RNA double helix in the vicinity of the U.G base pair. These results suggest that metal ion coordination (or a metal bridge) and tertiary interactions identified biochemically, may be used by group I intron ribozymes for substrate recognition.

A tertiary interaction in the Tetrahymena intron contributes to selection of the 5' splice site

The utilization of cryptic splice sites has been observed in a number of RNA splicing reactions. In the self-splicing group I intron of Tetrahymena thermophila, point mutations of either A57 or A95 promote cleavage at two sites other than the normal 5' splice site, suggesting that these nucleotides are involved in a common tertiary interaction. These results are unusual since A57 and A95 are neither at nor near the 5' splice site in the sequence or secondary structure. Cleavage at the alternative sites appears to occur by intron cyclization, a reaction with well-established structural and mechanistic similarities to the first step of RNA self-splicing. Alternative docking of P1 (the helix containing the 5' splice site paired to the internal guide sequence of the intron) into the catalytic core accounts for cleavage at the cryptic reaction sites. We propose that the A57/A95 interaction, along with an element implicated previously (J1/2), provide structural connectivity from the reaction site in P1 to the catalytic core of the Tetrahymena intron. It seems likely that RNA splicing in general will require such tertiary interactions to position RNA helices.