1
|
Muhetaer A, Tang C, Anniwaer A, Yang H, Huang C. Advances in ceramics for tooth repair: From bench to chairside. J Dent 2024; 146:105053. [PMID: 38729288 DOI: 10.1016/j.jdent.2024.105053] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/24/2024] [Revised: 05/02/2024] [Accepted: 05/06/2024] [Indexed: 05/12/2024] Open
Abstract
OBJECTIVES To give a comprehensive review of advancement in dental ceramics, fabrication methods, and the challenges associated with clinical application. DATA, SOURCES AND STUDY SELECTION Researches on chemical composition, biomechanical behaviors, optical properties, bonding strategies and fabrication methods were included. The search of articles was independently conducted by two authors in the PubMed, Scopus, Medline and Web of Science. CONCLUSIONS Dental ceramics have shown significant advancements in terms of esthetics and function. However, improving fracture toughness without compromising optical properties remains a challenge. Repairing fractured zirconia or glass-matrix ceramic prostheses with the same material is difficult due to the sintering process. Developing innovative bonding techniques that provide strong and long-lasting bonding strength between ceramics and tooth structures poses a recurring obstacle. CLINICAL SIGNIFICANCE Despite the emergence of dental ceramics and fabrication techniques, certain limitations such as susceptibility to brittleness and fracture still exist. Therefore, the current review provided valuable information around the advanced dental ceramics in tooth repair. The laboratory test data and the clinical outcome are also presented in details, aiming to guide clinicians in making informed decisions regarding ceramic restorations.
Collapse
Affiliation(s)
- Aihemaiti Muhetaer
- State Key Laboratory of Oral & Maxillofacial Reconstruction and Regeneration, Key Laboratory of Oral Biomedicine Ministry of Education, Hubei Key Laboratory of Stomatology, School & Hospital of Stomatology, Wuhan University, Wuhan, PR China; Department of Prosthodontics, School & Hospital of Stomatology, Wuhan University, Wuhan, PR China
| | - Chuliang Tang
- State Key Laboratory of Oral & Maxillofacial Reconstruction and Regeneration, Key Laboratory of Oral Biomedicine Ministry of Education, Hubei Key Laboratory of Stomatology, School & Hospital of Stomatology, Wuhan University, Wuhan, PR China; Department of Prosthodontics, School & Hospital of Stomatology, Wuhan University, Wuhan, PR China
| | - Annikaer Anniwaer
- State Key Laboratory of Oral & Maxillofacial Reconstruction and Regeneration, Key Laboratory of Oral Biomedicine Ministry of Education, Hubei Key Laboratory of Stomatology, School & Hospital of Stomatology, Wuhan University, Wuhan, PR China
| | - Hongye Yang
- State Key Laboratory of Oral & Maxillofacial Reconstruction and Regeneration, Key Laboratory of Oral Biomedicine Ministry of Education, Hubei Key Laboratory of Stomatology, School & Hospital of Stomatology, Wuhan University, Wuhan, PR China; Department of Prosthodontics, School & Hospital of Stomatology, Wuhan University, Wuhan, PR China.
| | - Cui Huang
- State Key Laboratory of Oral & Maxillofacial Reconstruction and Regeneration, Key Laboratory of Oral Biomedicine Ministry of Education, Hubei Key Laboratory of Stomatology, School & Hospital of Stomatology, Wuhan University, Wuhan, PR China; Department of Prosthodontics, School & Hospital of Stomatology, Wuhan University, Wuhan, PR China.
| |
Collapse
|
2
|
Jiang Q, Wang Z, Zhang S, Liu X, Fu B. Performance of Bonded Lithium Disilicate Partial-coverage Crowns in the Restoration of Endodontically Treated Posterior Teeth: An Up to Seven-Year Retrospective Study. Oper Dent 2024; 49:365-375. [PMID: 38978317 DOI: 10.2341/23-107-c] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 03/09/2024] [Indexed: 07/10/2024]
Abstract
OBJECTIVES To evaluate the clinical performance of adhesively bonded lithium disilicate glass-ceramic (LDG) partial-coverage crowns in restoring posterior endodontically treated teeth (ETT). METHODS AND MATERIALS A total of 121 morphologically compromised posterior ETT were restored with LDG partial-coverage crowns between October 2015 and January 2018. The restorations were fabricated in the laboratory or at the chairside. Two adhesive systems and resin cements were used to cement the restorations. Tooth and restoration survival rates were calculated. The restorations were evaluated clinically using the modified United States Public Health Service (USPHS) criteria for an observation period of 5-7 years. The Cox proportional hazards model was used to estimate relative failure risks such as tooth type, resin cements, gender, and sleep bruxism. The standard chi-squared test was used to compare the survival of different tooth types for significant differences (α=0.05). In addition, survival probability was calculated using the Kaplan-Meier algorithm. RESULTS Among seven failed cases, one was a tooth fracture, and six were restoration fractures. According to the Kaplan-Meier analysis, the estimated survival rate of the teeth was 99% for seven years, while the estimated survival rate of the restorations was 94.8% for 5 years and 92.8% for 7 years. Tooth type and resin cements did not influence restoration survival rates (p>0.05), while sleep bruxism and male patients might increase the risk of failure (p<0.05). CONCLUSIONS The indirect adhesively bonded LDG partial-coverage crowns of posterior ETT exhibited favorable clinical outcomes. Ceramic fracture was the most common failure pattern.
Collapse
Affiliation(s)
- Q Jiang
- Qin Jiang, MD, Department of Prosthodontic, Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Clinical Research Center for Oral Disease of Zhejiang Province, Key Laboratory of Oral Biomedical Research of Zhejiang Province, Cancer Center of Zhejiang University, Engineering Research Center of Oral Biomaterials and Devices of Zhejiang Province, Hangzhou, China
| | - Z Wang
- Zhe Wang, PhD, Department of Prosthodontic, Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Clinical Research Center for Oral Disease of Zhejiang Province, Key Laboratory of Oral Biomedical Research of Zhejiang Province, Cancer Center of Zhejiang University, Engineering Research Center of Oral Biomaterials and Devices of Zhejiang Province, Hangzhou, China
| | - S Zhang
- Sisi Zhang, BDS, Department of Prosthodontic, Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Clinical Research Center for Oral Disease of Zhejiang Province, Key Laboratory of Oral Biomedical Research of Zhejiang Province, Cancer Center of Zhejiang University, Engineering Research Center of Oral Biomaterials and Devices of Zhejiang Province, Hangzhou, China
| | - X Liu
- Xiaochen Liu, PhD, Department of Prosthodontic, Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Clinical Research Center for Oral Disease of Zhejiang Province, Key Laboratory of Oral Biomedical Research of Zhejiang Province, Cancer Center of Zhejiang University, Engineering Research Center of Oral Biomaterials and Devices of Zhejiang Province, Hangzhou, China
| | - B Fu
- *Baiping Fu, DMD, Department of Prosthodontic, Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Clinical Research Center for Oral Disease of Zhejiang Province, Key Laboratory of Oral Biomedical Research of Zhejiang Province, Cancer Center of Zhejiang University, Engineering Research Center of Oral Biomaterials and Devices of Zhejiang Province, Hangzhou, China
| |
Collapse
|
3
|
Le M, Papia E, Larsson C. The effect of combining primers and cements from different cement systems on the bond strength between zirconia and dentin. BDJ Open 2024; 10:44. [PMID: 38839781 PMCID: PMC11153574 DOI: 10.1038/s41405-024-00230-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/27/2024] [Revised: 05/13/2024] [Accepted: 05/14/2024] [Indexed: 06/07/2024] Open
Abstract
OBJECTIVE The aim of this study was to evaluate the influence of combining primers and cements from two different resin cement systems on the microtensile bond strength (μTBS) between zirconia and human dentin. MATERIALS AND METHODS A total of 120 specimens of zirconia cemented to dentin were allocated into eight groups based on cement type (RelyX Ultimate or Panavia V5) and primers (Tooth Primer, Clearfil Ceramic Primer and Scotchbond Universal Adhesive) combinations, applied to dentin or ceramic surfaces. Following artificial aging with 5000 thermocycles, μTBS tests were conducted. Statistical analysis was performed using One-way ANOVA and Tukey's post hoc tests (p ≤ 0.05), and failure modes were assessed. RESULTS The Panavia V5 cement system demonstrated the highest bond strength (19.4 ± 4.4 MPa), significantly higher than the other groups except when RelyX cement was used with Panavia primers (16.9 ± 3.7 MPa). Cohesive fractures within the cement layer were the predominant failure mode. CONCLUSIONS The combination of primers from different adhesive cement system brands may significantly affect the bonding effectiveness. Therefore, using products from a single product line of the same adhesive cement system, and following the manufacturer's recommendations for indications and use, is crucial for a more predictable clinical outcome.
Collapse
Affiliation(s)
- Minh Le
- Department of Prosthodontics, Faculty of Odontology, Malmö University, Malmö, Sweden.
- Department of Materials Science and Technology, Faculty of Odontology, Malmö University, Malmö, Sweden.
| | - Evaggelia Papia
- Department of Materials Science and Technology, Faculty of Odontology, Malmö University, Malmö, Sweden
| | - Christel Larsson
- Department of Prosthodontics, Faculty of Odontology, Malmö University, Malmö, Sweden
- Department of Prosthodontics, Riga Stradins University, Riga, Latvia
| |
Collapse
|
4
|
Wang S, Liu J, Caroprese M, Gianfreda F, Melloni F, DE Santis D. Exploring the potential of calcium-based biomaterials for bone regeneration in dentistry: a systematic review. Minerva Dent Oral Sci 2024; 73:169-180. [PMID: 38127421 DOI: 10.23736/s2724-6329.23.04859-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2023]
Abstract
INTRODUCTION Regenerative medicine emerged as a promising strategy for addressing bone defects, with several bone grafts currently being used, including autografts, allografts, xenografts and alloplasts. Calcium-based biomaterials (CaXs), a well-known class of synthetic materials, have demonstrated good biological properties and are being investigated for their potential to facilitate bone regeneration. This systematic review evaluates the current clinical applications of CaXs in dentistry for bone regeneration. EVIDENCE ACQUISITION A comprehensive search was conducted to collect information about CaXs and their applications in the dental field over the last ten years. The search was limited to relevant articles published in peer-reviewed journals. EVIDENCE SYNTHESIS A total of 72 articles were included in this scoping review, with eight studies related to periodontology, 63 in implantology and three in maxillofacial surgery respectively. The findings suggest that CaXs hold promise as an alternative intervention for minor bone regeneration in dentistry. CONCLUSIONS Calcium-based biomaterials have shown potential as a viable option for bone regeneration in dentistry. Further research is warranted to fully understand their efficacy and safety in larger bone defects. CaXs represent an exciting avenue for researchers and clinicians to explore in their ongoing efforts to advance regenerative medicine.
Collapse
Affiliation(s)
- Siwei Wang
- Department of Dental Implantology, The Affiliated Stomatological Hospital, Zunyi Medical University, Zunyi, Guizhou, China
| | - Jianguo Liu
- Key Laboratory of Oral Disease Research, School of Stomatology, Zunyi Medical University, Zunyi, Guizhou, China
| | - Marino Caroprese
- Department of Clinical and Experimental Medicine, University of Foggia, Foggia, Italy
| | - Francesco Gianfreda
- Department of Industrial Engineering, University of Rome Tor Vergata, Rome, Italy
| | - Federica Melloni
- Section of Head and Neck Surgery, Department of Surgery, Dentistry, Pediatrics, and Gynecology, University of Verona, Verona, Italy
| | - Daniele DE Santis
- Section of Head and Neck Surgery, Department of Surgery, Dentistry, Pediatrics, and Gynecology, University of Verona, Verona, Italy -
| |
Collapse
|
5
|
Moussa C, Savard G, Rochefort G, Renaud M, Denis F, Daou MH. Fracture Resistance of Direct versus Indirect Restorations on Posterior Teeth: A Systematic Review and Meta-Analysis. Bioengineering (Basel) 2024; 11:536. [PMID: 38927772 PMCID: PMC11201167 DOI: 10.3390/bioengineering11060536] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/24/2024] [Revised: 05/14/2024] [Accepted: 05/21/2024] [Indexed: 06/28/2024] Open
Abstract
The aim of this systematic review and meta-analysis was to compare static compression forces between direct composite resin restorations and indirect restorations for posterior teeth. All studies comparing mechanical properties of direct versus indirect restorations of posterior teeth were included from 2007 up to February 2024. A meta-analysis was conducted for static compression fracture resistance. Medline, Central, and Embase databases were screened. Twenty-four articles were included in the qualitative synthesis, and sixteen studies were finally included in the quantitative synthesis. There was no difference in terms of fracture resistance between direct and indirect restorations for posterior teeth (p = 0.16 for direct and indirect composite resin restorations and p = 0.87 for direct composite resin restorations and indirect ceramic restorations). Also, sub-group analysis with or without cusp coverage in each group revealed no discernable difference. Based on this study, it can be concluded that the choice between direct and indirect restoration approaches may not significantly impact fracture resistance outcomes. There was no statically significant difference between direct and indirect restorations for posterior teeth in all cases of restorations with or without cusp coverage and no matter the used materials. However, to better evaluate these materials, further studies are warranted.
Collapse
Affiliation(s)
- Carol Moussa
- Faculty of Dentistry, University of Tours, 37032 Tours, France; (G.S.); (G.R.); (M.R.); (F.D.); (M.H.D.)
- Department of Restorative Dentistry, Faculty of Dental Medicine, Saint-Joseph University, Beirut 1107 2180, Lebanon
- Division of Education, Ethics, Health, Faculty of Medicine, University of Tours, 37044 Tours, France
| | - Guillaume Savard
- Faculty of Dentistry, University of Tours, 37032 Tours, France; (G.S.); (G.R.); (M.R.); (F.D.); (M.H.D.)
- Division of Education, Ethics, Health, Faculty of Medicine, University of Tours, 37044 Tours, France
- Department of Medicine and Bucco-Dental Surgery, Tours University Hospital, 37044 Tours, France
| | - Gael Rochefort
- Faculty of Dentistry, University of Tours, 37032 Tours, France; (G.S.); (G.R.); (M.R.); (F.D.); (M.H.D.)
- INSERM, Imaging Brain & Neuropsychiatry iBraiN U1253, 37032 Tours, France
| | - Matthieu Renaud
- Faculty of Dentistry, University of Tours, 37032 Tours, France; (G.S.); (G.R.); (M.R.); (F.D.); (M.H.D.)
- Department of Medicine and Bucco-Dental Surgery, Tours University Hospital, 37044 Tours, France
- N2C Laboratory, UMR INSERM U 1069, University of Tours, 37032 Tours, France
| | - Frédéric Denis
- Faculty of Dentistry, University of Tours, 37032 Tours, France; (G.S.); (G.R.); (M.R.); (F.D.); (M.H.D.)
- Division of Education, Ethics, Health, Faculty of Medicine, University of Tours, 37044 Tours, France
- Department of Medicine and Bucco-Dental Surgery, Tours University Hospital, 37044 Tours, France
| | - Maha H. Daou
- Faculty of Dentistry, University of Tours, 37032 Tours, France; (G.S.); (G.R.); (M.R.); (F.D.); (M.H.D.)
- Department of Pediatric Dentistry, Faculty of Dental Medicine, Saint Joseph University, Beirut 1107 2180, Lebanon
- Division of Biomaterials, Craniofacial Research Laboratory, Saint Joseph University, Beirut 1107 2180, Lebanon
| |
Collapse
|
6
|
Saini RS, Alshadidi AAF, Gurumurthy V, Okshah A, Vaddamanu SK, Binduhayyim RIH, Chaturvedi S, Bavabeedu SS, Heboyan A. Quantum mechanical analysis of yttrium-stabilized zirconia and alumina: implications for mechanical performance of esthetic crowns. Eur J Med Res 2024; 29:254. [PMID: 38659074 PMCID: PMC11044456 DOI: 10.1186/s40001-024-01851-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/25/2024] [Accepted: 04/18/2024] [Indexed: 04/26/2024] Open
Abstract
BACKGROUND Yttrium-stabilized zirconia (YSZ) and alumina are the most commonly used dental esthetic crown materials. This study aimed to provide detailed information on the comparison between yttrium-stabilized zirconia (YSZ) and alumina, the two materials most often used for esthetic crowns in dentistry. METHODOLOGY The ground-state energy of the materials was calculated using the Cambridge Serial Total Energy Package (CASTEP) code, which employs a first-principles method based on density functional theory (DFT). The electronic exchange-correlation energy was evaluated using the generalized gradient approximation (GGA) within the Perdew (Burke) Ernzerhof scheme. RESULTS Optimization of the geometries and investigation of the optical properties, dynamic stability, band structures, refractive indices, and mechanical properties of these materials contribute to a holistic understanding of these materials. Geometric optimization of YSZ provides important insights into its dynamic stability based on observations of its crystal structure and polyhedral geometry, which show stable configurations. Alumina exhibits a distinctive charge, kinetic, and potential (CKP) geometry, which contributes to its interesting structural framework and molecular-level stability. The optical properties of alumina were evaluated using pseudo-atomic computations, demonstrating its responsiveness to external stimuli. The refractive indices, reflectance, and dielectric functions indicate that the transmission of light by alumina depends on numerous factors that are essential for the optical performance of alumina as a material for esthetic crowns. The band structures of both the materials were explored, and the band gap of alumina was determined to be 5.853 eV. In addition, the band structure describes electronic transitions that influence the conductivity and optical properties of a material. The stability of alumina can be deduced from its bandgap, an essential property that determines its use as a dental material. Refractive indices are vital optical properties of esthetic crown materials. Therefore, the ability to understand their refractive-index graphs explains their transparency and color distortion through how the material responds to light..The regulated absorption characteristics exhibited by YSZ render it a highly attractive option for the development of esthetic crowns, as it guarantees minimal color distortion. CONCLUSION The acceptability of materials for esthetic crowns is strongly determined by mechanical properties such as elastic stiffness constants, Young's modulus, and shear modulus. YSZ is a highly durable material for dental applications, owing to its superior mechanical strength.
Collapse
Affiliation(s)
- Ravinder S Saini
- Department of Dental Technology, COAMS, King Khalid University, Abha, Saudi Arabia
| | | | | | - Abdulmajeed Okshah
- Department of Dental Technology, COAMS, King Khalid University, Abha, Saudi Arabia
| | | | | | - Saurabh Chaturvedi
- Department of Prosthetic Dentistry, College of Dentistry, King Khalid University, Abha, Saudi Arabia
| | - Shashit Shetty Bavabeedu
- Department of Restorative Dental Sciences, College of Dentistry, King Khalid University, Abha, Saudi Arabia
| | - Artak Heboyan
- Department of Research Analytics, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Chennai, 600 077, India.
- Department of Prosthodontics, Faculty of Stomatology, Yerevan State Medical University after Mkhitar Heratsi, Str. Koryun 2, 0025, Yerevan, Armenia.
- Department of Prosthodontics, School of Dentistry, Tehran University of Medical Sciences, North Karegar St, Tehran, Iran.
| |
Collapse
|
7
|
Maintz M, Tourbier C, de Wild M, Cattin PC, Beyer M, Seiler D, Honigmann P, Sharma N, Thieringer FM. Patient-specific implants made of 3D printed bioresorbable polymers at the point-of-care: material, technology, and scope of surgical application. 3D Print Med 2024; 10:13. [PMID: 38639834 PMCID: PMC11031859 DOI: 10.1186/s41205-024-00207-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/05/2024] [Accepted: 03/04/2024] [Indexed: 04/20/2024] Open
Abstract
BACKGROUND Bioresorbable patient-specific additive-manufactured bone grafts, meshes, and plates are emerging as a promising alternative that can overcome the challenges associated with conventional off-the-shelf implants. The fabrication of patient-specific implants (PSIs) directly at the point-of-care (POC), such as hospitals, clinics, and surgical centers, allows for more flexible, faster, and more efficient processes, reducing the need for outsourcing to external manufacturers. We want to emphasize the potential advantages of producing bioresorbable polymer implants for cranio-maxillofacial surgery at the POC by highlighting its surgical applications, benefits, and limitations. METHODS This study describes the workflow of designing and fabricating degradable polymeric PSIs using three-dimensional (3D) printing technology. The cortical bone was segmented from the patient's computed tomography data using Materialise Mimics software, and the PSIs were designed created using Geomagic Freeform and nTopology software. The implants were finally printed via Arburg Plastic Freeforming (APF) of medical-grade poly (L-lactide-co-D, L-lactide) with 30% β-tricalcium phosphate and evaluated for fit. RESULTS 3D printed implants using APF technology showed surfaces with highly uniform and well-connected droplets with minimal gap formation between the printed paths. For the plates and meshes, a wall thickness down to 0.8 mm could be achieved. In this study, we successfully printed plates for osteosynthesis, implants for orbital floor fractures, meshes for alveolar bone regeneration, and bone scaffolds with interconnected channels. CONCLUSIONS This study shows the feasibility of using 3D printing to create degradable polymeric PSIs seamlessly integrated into virtual surgical planning workflows. Implementing POC 3D printing of biodegradable PSI can potentially improve therapeutic outcomes, but regulatory compliance must be addressed.
Collapse
Affiliation(s)
- Michaela Maintz
- Oral and Cranio-Maxillofacial Surgery, University Hospital Basel, Spitalstrasse 21, Basel, Switzerland
- Department of Biomedical Engineering, Medical Additive Manufacturing Research Group (Swiss MAM), University of Basel, Hegenheimermattweg 167C, Allschwil, Switzerland
- Institute for Medical Engineering and Medical Informatics IM², University of Applied Sciences and Arts Northwestern Switzerland FHNW, Hofackerstrasse 30, Muttenz, Switzerland
| | - Céline Tourbier
- Oral and Cranio-Maxillofacial Surgery, University Hospital Basel, Spitalstrasse 21, Basel, Switzerland.
- Department of Biomedical Engineering, Medical Additive Manufacturing Research Group (Swiss MAM), University of Basel, Hegenheimermattweg 167C, Allschwil, Switzerland.
| | - Michael de Wild
- Institute for Medical Engineering and Medical Informatics IM², University of Applied Sciences and Arts Northwestern Switzerland FHNW, Hofackerstrasse 30, Muttenz, Switzerland
| | - Philippe C Cattin
- Department of Biomedical Engineering, Center of Medical Image Analysis and Navigation (CIAN), University of Basel, Hegenheimermattweg 167C, Allschwil, Basel, Switzerland
| | - Michel Beyer
- Oral and Cranio-Maxillofacial Surgery, University Hospital Basel, Spitalstrasse 21, Basel, Switzerland
- Department of Biomedical Engineering, Medical Additive Manufacturing Research Group (Swiss MAM), University of Basel, Hegenheimermattweg 167C, Allschwil, Switzerland
| | - Daniel Seiler
- Institute for Medical Engineering and Medical Informatics IM², University of Applied Sciences and Arts Northwestern Switzerland FHNW, Hofackerstrasse 30, Muttenz, Switzerland
| | - Philipp Honigmann
- Department of Biomedical Engineering, Medical Additive Manufacturing Research Group (Swiss MAM), University of Basel, Hegenheimermattweg 167C, Allschwil, Switzerland
- Department of Orthopaedic Surgery and Traumatology, Hand- and peripheral Nerve Surgery, Kantonsspital Baselland, Bruderholz| Liestal| Laufen, Switzerland
- Biomedical Engineering and Physics, Amsterdam UMC location University of Amsterdam, Meibergdreef 9, Amsterdam, The Netherlands
| | - Neha Sharma
- Oral and Cranio-Maxillofacial Surgery, University Hospital Basel, Spitalstrasse 21, Basel, Switzerland
- Department of Biomedical Engineering, Medical Additive Manufacturing Research Group (Swiss MAM), University of Basel, Hegenheimermattweg 167C, Allschwil, Switzerland
| | - Florian M Thieringer
- Oral and Cranio-Maxillofacial Surgery, University Hospital Basel, Spitalstrasse 21, Basel, Switzerland
- Department of Biomedical Engineering, Medical Additive Manufacturing Research Group (Swiss MAM), University of Basel, Hegenheimermattweg 167C, Allschwil, Switzerland
| |
Collapse
|
8
|
Guillén-Martínez AL, Alarcón-Sánchez MA. Criteria for choosing prosthetic biomaterials according to their physicochemical properties for anterior and posterior sectors. a comprehensive review. REVISTA CIENTÍFICA ODONTOLÓGICA 2024; 12:e188. [PMID: 39015310 PMCID: PMC11247470 DOI: 10.21142/2523-2754-1201-2024-188] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/09/2023] [Accepted: 12/11/2023] [Indexed: 07/18/2024] Open
Abstract
Objective To describe the existing knowledge about metal-free prosthetic biomaterials according to their physicochemical properties and based on this, define criteria for their placement in both the anterior and posterior sectors. Materials and methods A digital search was carried out in the databases: PubMed/Medline, Scopus, Web of Science and Google Scholar of the literature published in the English language without time restrictions and included original articles such as case reports, retrospective and prospective studies, narrative, comprehensive, systematic reviews and meta-analysis. Meanwhile, short communications, editorials and articles in a language other than English were excluded. Results 40 articles were evaluated, published between 2000 and 2023. The main characteristics and physicochemical properties of ceramic biomaterials such as zirconia, feldspathic based ceramics, lithium disilicate and alumina, among others, were analyzed and summarized. In addition, certain criteria were defined based on the available scientific evidence on the use of different ceramic systems both in the anterior sector and in the posterior sector for patients who need some type of prosthetic restoration. Conclusions Among the different metal-free materials used for the construction of fixed dental prostheses, zirconia has been shown to have better aesthetic, biomechanical and biocompatibility properties, which makes it a candidate material for the rehabilitation of partially edentulous patients.
Collapse
Affiliation(s)
- América Lucero Guillén-Martínez
- Independient Researcher. Blvd. Lic. Luis Sánchez Pontón 437, San Baltazar Campeche, Puebla 72550. Puebla, Mexico. Independient Researcher Puebla Mexico
| | - Mario Alberto Alarcón-Sánchez
- Department of Research in Microbiology, Faculty of Chemical and Biological Sciences, Autonomous University of Guerrero, Chilpancingo 39090. Guerrero, Mexico. Department of Research in Microbiology Faculty of Chemical and Biological Sciences Autonomous University of Guerrero Guerrero Mexico
| |
Collapse
|
9
|
Lempel E, Gyulai S, Lovász BV, Jeges S, Szalma J. Clinical evaluation of lithium disilicate versus indirect resin composite partial posterior restorations - A 7.8-year retrospective study. Dent Mater 2023; 39:1095-1104. [PMID: 37821330 DOI: 10.1016/j.dental.2023.10.017] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/27/2023] [Revised: 09/26/2023] [Accepted: 10/07/2023] [Indexed: 10/13/2023]
Abstract
OBJECTIVE To evaluate retrospectively the longevity of lithium disilicate ceramic (LidiSi) vs. laboratory-processed resin-based composite (RBC) inlay/onlay/overlay restorations and risk factors associated with restoration deficiencies and failures. METHODS Patients (n = 91) receiving LidiSi (73.1%) and RBC (36.9%) inlays/onlays/overlays between 2007 and 2017 were selected. The restorations were evaluated using the modified U.S. Public Health Service criteria. The survival of the restorations was analyzed using the Kaplan-Meier method and log rank test. Factors affecting the occurrence of deficiencies were examined by logistic regression analysis. This was performed with the use of the Generalized Estimating Equation model including Repeated measurements (GEER), with the consideration that the same patient had several teeth in the sample. Risk estimation was conducted for each evaluated criterion (p < 0.05). RESULTS The survival of LidiSi and RBC restorations were 96.8% and 84.9%, respectively after a mean observation period of 7.8 ± 3.3 years. The annual failure rate was 0.2% for LidiSi and 1.0% for RBC. The probability of survival was above 98% for both restorations in the first 6 years, however, it dropped to 60% for RBC by the end of the 15th year. For both materials the reasons for failure included secondary caries, restoration fracture, and endodontic complication. In addition, LidiSi also failed due to tooth fracture, while RBC due to marginal gap formation and loss of retention. Among the evaluated risk factors, material of restoration (OR=6.8, CI95%:3.1-14.9), oral hygiene (OR=8.0, CI95%: 2.9-22.1], and bruxism (OR=1.9, CI95%: 1.1-3.3) showed a significant impact on the evaluated criteria. SIGNIFICANCE LidiSi and RBC restorations showed similarly excellent 6-year survival, however, in the long term significantly more failures should be expected for RBCs.
Collapse
Affiliation(s)
- Edina Lempel
- Department of Restorative Dentistry and Periodontology, University of Pécs Medical School, Tüzér Street 1, Pécs 7623, Hungary.
| | - Sarolta Gyulai
- Department of Restorative Dentistry and Periodontology, University of Pécs Medical School, Tüzér Street 1, Pécs 7623, Hungary; Department of Oral and Maxillofacial Surgery, University of Pécs Medical School, Tüzér Street 1, Pécs 7623, Hungary
| | - Bálint Viktor Lovász
- Oral and Maxillofacial Department, Manchester University Foundation Trust, Manchester Royal Infirmary Hospital, Oxford Rd, Manchester M13 9WL, United Kingdom
| | - Sára Jeges
- Faculty of Health Sciences, University of Pécs, Vörösmarty M. Street 4, Pécs 7621, Hungary
| | - József Szalma
- Department of Oral and Maxillofacial Surgery, University of Pécs Medical School, Tüzér Street 1, Pécs 7623, Hungary
| |
Collapse
|
10
|
Sathishkumar S, Paulraj J, Chakraborti P, Muthuraj M. Comprehensive Review on Biomaterials and Their Inherent Behaviors for Hip Repair Applications. ACS APPLIED BIO MATERIALS 2023; 6:4439-4464. [PMID: 37871169 DOI: 10.1021/acsabm.3c00327] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/25/2023]
Abstract
Developing biomaterials for hip prostheses is challenging and requires dedicated attention from researchers. Hip replacement is an inevitable and remarkable orthopedic therapy for enhancing the quality of patient life for those who have arthritis as well as trauma. Generally, five types of hip replacement procedures are successfully performed in the current medical market: total hip replacements, hip resurfacing, hemiarthroplasty, bipolar, and dual mobility systems. The average life span of artificial hip joints is about 15 years, and several studies have been conducted over the last 60 years to improve the performance and thereby increase the lifespan of artificial hip joints. Present-day prosthetic hip joints are linked to the wide availability of biomaterials. Metals, ceramics, and polymers are some of the most promising types of biomaterials; nevertheless, each biomaterial has advantages and disadvantages. Metals and ceramics fail in most applications owing to stress shielding and the emission of wear debris; ongoing research is being carried out to find a remedy to these unfavorable responses. Recent research found that polymers and composites based on polymers are significant alternative materials for artificial joints. With growing research and several biomaterials, recent reviews lag in effectively addressing hip implant materials' individual mechanical, tribological, and physiological behaviors. This Review comprehensively investigates the historical evolution of artificial hip replacement procedures and related biomaterials' mechanical, tribological, and biological characteristics. In addition, the most recent advances are also discussed to stimulate and guide future researchers as they seek more effective methods and synthesis of innovative biomaterials for hip arthroplasty application.
Collapse
|
11
|
Gershater E, Griswold O, Talsania BE, Zhang Y, Chung CH, Zheng Z, Li C. Effects of Plasma Treatment on the Strength of Bonding to Ceramic Surfaces in Orthodontics-A Comprehensive Review. Bioengineering (Basel) 2023; 10:1323. [PMID: 38002447 PMCID: PMC10669322 DOI: 10.3390/bioengineering10111323] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/24/2023] [Revised: 11/10/2023] [Accepted: 11/14/2023] [Indexed: 11/26/2023] Open
Abstract
Over the past several decades, orthodontic treatment has been increasingly sought out by adults, many of whom have undergone restorative dental procedures that cover enamel. Because the characteristics of restorative materials differ from those of enamel, typical bonding techniques do not yield excellent restoration-bracket bonding strengths. Plasma treatment is an emerging surface treatment that could potentially improve bonding properties. The purpose of this paper is to evaluate currently available studies assessing the effect of plasma treatment on the shear bond strength (SBS) and failure mode of resin cement/composite on the surface of ceramic materials. PubMed and Google Scholar databases were searched for relevant studies, which were categorized by restorative material and plasma treatment types that were evaluated. It was determined that cold atmospheric plasma (CAP) treatment using helium and H2O gas was effective at raising the SBS of feldspathic porcelain to a bonding agent, while CAP treatment using helium gas might also be a potential treatment method for zirconia and other types of ceramics. More importantly, CAP treatment using helium has the potential for being carried out chairside due to its non-toxicity, low temperature, and short treatment time. However, because all the studies were conducted in vitro and not tested in an orthodontic setting, further research must be conducted to ascertain the effectiveness of specific plasma treatments in comparison to current orthodontic bonding treatments in vivo.
Collapse
Affiliation(s)
- Elizabeth Gershater
- Division of Orthodontics, College of Dental Medicine, Columbia University, New York, NY 10032, USA
| | - Olivia Griswold
- Department of Orthodontics, School of Dental Medicine, University of Pennsylvania, Philadelphia, PA 19104, USA
| | - Brooke E. Talsania
- School of Dental Medicine, University of Pennsylvania, Philadelphia, PA 19104, USA
| | - Yu Zhang
- Department of Preventive and Restorative Sciences, School of Dental Medicine, University of Pennsylvania, Philadelphia, PA 19104, USA
| | - Chun-Hsi Chung
- Department of Orthodontics, School of Dental Medicine, University of Pennsylvania, Philadelphia, PA 19104, USA
| | - Zhong Zheng
- David Geffen School of Medicine, University of California, Los Angeles, Los Angeles, CA 90095, USA
| | - Chenshuang Li
- Department of Orthodontics, School of Dental Medicine, University of Pennsylvania, Philadelphia, PA 19104, USA
| |
Collapse
|
12
|
Lu Y, de Oliveira Dal Piva AM, Tribst JPM, Feilzer AJ, Kleverlaan CJ. Does glaze firing affect the strength of advanced lithium disilicate after simulated defects? Clin Oral Investig 2023; 27:6429-6438. [PMID: 37726488 PMCID: PMC10630247 DOI: 10.1007/s00784-023-05246-1] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/26/2023] [Accepted: 09/05/2023] [Indexed: 09/21/2023]
Abstract
OBJECTIVE To study the influence of glazing on strength repair of lithium disilicate glass-ceramics after defect incorporation in different production processing phases. MATERIALS AND METHODS Bar-shaped specimens (1 × 1 × 12 mm, n = 280; 20/group) made from different lithium disilicate ceramics (IPS e.max CAD, Ivoclar, "LD" or advanced lithium disilicate CEREC Tessera, Dentsply Sirona, "ALD") were exposed to 7 different protocols: crystallized without (c) and with glaze layer (cg), with a defect incorporated before crystallization without (ic) and with glaze layer (icg), with a defect after crystallization without (ci) or with glaze layer (cig), and defect incorporated after the glaze layer (cgi). The flexural strength was determined using the three-point bending test. Analysis of indented areas and fractured specimens was performed by scanning electron microscopy. Flexural strength data were evaluated by two-way ANOVA followed by Tukey tests (α = 5%). RESULTS Two-way ANOVA revealed a significant influence of ceramic (p < 0.001; F = 55.45), protocol (p < 0.001; F = 56.94), and the interaction protocol*ceramic (p < 0.001; F = 13.86). Regardless of ceramics, defect incorporation as final step resulted in the worst strength, while defects introduced before crystallization did not reduce strength. Glaze firing after defect incorporation led to strength repair for ALD, whereas such an effect was not evident for LD. CONCLUSIONS The advanced lithium disilicate must receive a glaze layer to achieve its highest strength. Defects incorporated in the pre-crystallized stage can be healed during crystallization. Defects should not be incorporated after glazing. CLINICAL RELEVANCE Clinical adjustments should be performed on pre-crystallized or crystalized restorations that receive a glazer layer afterwards.
Collapse
Affiliation(s)
- Yuqing Lu
- Department of Dental Materials Science, Academic Centre for Dentistry Amsterdam (ACTA), Universiteit Van Amsterdam and Vrije Universiteit, Gustav Mahlerlaan 3004, 1081 LA, Amsterdam, Noord-Holland, The Netherlands
| | - Amanda Maria de Oliveira Dal Piva
- Department of Dental Materials Science, Academic Centre for Dentistry Amsterdam (ACTA), Universiteit Van Amsterdam and Vrije Universiteit, Gustav Mahlerlaan 3004, 1081 LA, Amsterdam, Noord-Holland, The Netherlands.
| | - João Paulo Mendes Tribst
- Department of Reconstructive Oral Care, Academic Centre for Dentistry Amsterdam (ACTA), Universiteit Van Amsterdam and Vrije Universiteit, Amsterdam, The Netherlands
| | - Albert J Feilzer
- Department of Dental Materials Science, Academic Centre for Dentistry Amsterdam (ACTA), Universiteit Van Amsterdam and Vrije Universiteit, Gustav Mahlerlaan 3004, 1081 LA, Amsterdam, Noord-Holland, The Netherlands
- Department of Reconstructive Oral Care, Academic Centre for Dentistry Amsterdam (ACTA), Universiteit Van Amsterdam and Vrije Universiteit, Amsterdam, The Netherlands
| | - Cornelis J Kleverlaan
- Department of Dental Materials Science, Academic Centre for Dentistry Amsterdam (ACTA), Universiteit Van Amsterdam and Vrije Universiteit, Gustav Mahlerlaan 3004, 1081 LA, Amsterdam, Noord-Holland, The Netherlands
| |
Collapse
|
13
|
Kalidindi Y, Ganapathy AK, Nayak Y, Elumalai A, Chen DZ, Bishop G, Sanchez A, Albers B, Shetty AS, Ballard DH. Computed Tomography Attenuation of Three-Dimensional (3D) Printing Materials-Depository to Aid in Constructing 3D-Printed Phantoms. MICROMACHINES 2023; 14:1928. [PMID: 37893365 PMCID: PMC10609050 DOI: 10.3390/mi14101928] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/11/2023] [Revised: 10/06/2023] [Accepted: 10/11/2023] [Indexed: 10/29/2023]
Abstract
Three-dimensionally printed phantoms are increasingly used in medical imaging and research due to their cost-effectiveness and customizability, offering valuable alternatives to commercial phantoms. The purpose of this study was to assess the computed tomography (CT) attenuation characteristics of 27 resin materials from Formlabs, a 3D printing equipment and materials manufacturer. Cube phantoms (both solid and hollow constructions) produced with each resin were subjected to CT scanning under varying tube current-time products with attenuation measurements recorded in Hounsfield units (HU). The resins exhibited a wide range of attenuation values (-3.33 to 2666.27 HU), closely mimicking a range of human tissues, from fluids to dense bone structures. The resins also demonstrated consistent attenuation regardless of changes in the tube current. The CT attenuation analysis of FormLabs resins produced an archive of radiological imaging characteristics of photopolymers that can be utilized to construct more accurate tissue mimicking medical phantoms and improve the evaluation of imaging device performance.
Collapse
Affiliation(s)
- Yuktesh Kalidindi
- School of Medicine, Saint Louis University, St. Louis, MO 63104, USA;
| | - Aravinda Krishna Ganapathy
- School of Medicine, Washington University in St. Louis, St. Louis, MO 63110, USA; (A.K.G.); (Y.N.); (D.Z.C.)
| | - Yash Nayak
- School of Medicine, Washington University in St. Louis, St. Louis, MO 63110, USA; (A.K.G.); (Y.N.); (D.Z.C.)
| | - Anusha Elumalai
- Mallinckrodt Institute of Radiology, Washington University School of Medicine, St. Louis, MO 63110, USA; (A.E.); (G.B.); (A.S.); (A.S.S.)
| | - David Z. Chen
- School of Medicine, Washington University in St. Louis, St. Louis, MO 63110, USA; (A.K.G.); (Y.N.); (D.Z.C.)
| | - Grace Bishop
- Mallinckrodt Institute of Radiology, Washington University School of Medicine, St. Louis, MO 63110, USA; (A.E.); (G.B.); (A.S.); (A.S.S.)
| | - Adrian Sanchez
- Mallinckrodt Institute of Radiology, Washington University School of Medicine, St. Louis, MO 63110, USA; (A.E.); (G.B.); (A.S.); (A.S.S.)
| | - Brian Albers
- St. Louis Children’s Hospital Medical 3D Printing Center, BJC Healthcare, St. Louis, MO 63110, USA;
| | - Anup S. Shetty
- Mallinckrodt Institute of Radiology, Washington University School of Medicine, St. Louis, MO 63110, USA; (A.E.); (G.B.); (A.S.); (A.S.S.)
| | - David H. Ballard
- Mallinckrodt Institute of Radiology, Washington University School of Medicine, St. Louis, MO 63110, USA; (A.E.); (G.B.); (A.S.); (A.S.S.)
| |
Collapse
|
14
|
Zhang X, Zhang Y, Li Y, Wang X, Zhang X. Restorative Dental Resin Functionalized with Calcium Methacrylate with a Hydroxyapatite Remineralization Capacity. MATERIALS (BASEL, SWITZERLAND) 2023; 16:6497. [PMID: 37834635 PMCID: PMC10573481 DOI: 10.3390/ma16196497] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/29/2023] [Revised: 09/24/2023] [Accepted: 09/27/2023] [Indexed: 10/15/2023]
Abstract
The ability of dental materials to induce the mineralization of enamel like hydroxyapatite (HA) is of great importance. In this article, a novel kind of dental restorative material characterized by a mineralization ability was fabricated by photopolymerization. Calcium methacrylate (CMA) was introduced into the classical bisphenol A-glycidyl methacrylate (Bis-GMA) and triethylene glycol dimethacrylate (TEGDMA) dental resin formulation. This functional dental resin (BTCM) was calcium-rich and can be prepared simply by one-step photopolymerization. The influence of CMA on the photopolymerization kinetics, the dental resin's mechanical properties, and its capacity to induce dynamic in situ HA mineralization were examined. Real-time FTIR, compression modulus, scanning electron microscopy, X-ray spectroscopy, MTT assay, and cell attachment test were carried out. The obtained data were analyzed for statistical significance using analysis of variance (ANOVA). Double bond conversion could be completed in less than 300 s, while the compression modulus of BTCM decreased with the increase in CMA content (30 wt%, 40 wt%, and 50 wt%). After being soaked in Ca(NO3)2 and Na2HPO4 solutions alternatively, dense HA crystals were found on the surface of the dental resin which contained CMA. The amount of HA increased with the increase in CMA content. The MTT results indicated that BTCM possesses good biocompatibility, while the cell adhesion and proliferation investigation demonstrated that L929 cells can adhere and proliferate well on the surface of BTM. Thus, our approach provides a straightforward, cost-effective, and environmentally friendly solution that has the potential for immediate clinical use.
Collapse
Affiliation(s)
- Xin Zhang
- College of Chemistry and Materials Engineering, Beijing Technology and Business University, Beijing 100048, China
| | - Yuxuan Zhang
- FuYang Sineva Materials Technology Co., Ltd., Beijing 100176, China;
| | - Ying Li
- College of Chemistry and Materials Engineering, Beijing Technology and Business University, Beijing 100048, China
| | - Xiaoming Wang
- Shuozhou Comprehensive Inspection and Testing Center, Shuozhou 036000, China
| | - Xueqin Zhang
- College of Chemistry and Materials Engineering, Beijing Technology and Business University, Beijing 100048, China
| |
Collapse
|
15
|
Alevizakos V, Mosch R, von See C. Influence of Multiple Used Implant Drills on Their Cutting Performance and Fracture Resistance. MATERIALS (BASEL, SWITZERLAND) 2023; 16:5271. [PMID: 37569975 PMCID: PMC10420324 DOI: 10.3390/ma16155271] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/22/2023] [Revised: 07/25/2023] [Accepted: 07/25/2023] [Indexed: 08/13/2023]
Abstract
This study aimed to analyze the influence of multiple uses of zirconia implant drills on their cutting performance and bending strength. The hypothesis was that drill usage and sterilization cycles would not affect drilling time or flexural strength. Sixty zirconia twist drills from Z-Systems were used to drill in the angulus mandibulae region of fresh porcine jaws. The drills were divided into four groups based on the cycle count, and the drilling time was measured. Bending strength tests were conducted using a universal testing machine, and statistical analysis was performed using ANOVA tests. The results showed that drilling times followed a normal distribution, and significant differences were observed in drilling times between group 1 and the other groups for the pilot drill. However, no significant differences were found for ø3.75 mm and ø4.25 mm drills, and drilling times also varied significantly among different drill diameters, regardless of the cycle count. Flexural strength did not significantly differ among drill diameters or sterilization cycles. Overall, using and sterilizing zirconia implant drills had no significant impact on drilling time or flexural strength. Nevertheless, drilling times did vary depending on the diameter of the drill. These findings provide valuable insights into the performance and durability of zirconia implant drills, contributing to the optimization of dental implant procedures.
Collapse
Affiliation(s)
- Vasilios Alevizakos
- Research Center for Digital Technologies in Dentistry and CAD/CAM, Danube Private University, Steiner Landstrasse 124, 3500 Krems an der Donau, Austria; (R.M.); (C.v.S.)
| | | | | |
Collapse
|
16
|
Lee PC, Peng TY, Ma TL, Chiang KY, Mine Y, Lee IT, Yu CC, Chen SF, Yu JH. Effect of Various Airborne Particle Abrasion Conditions on Bonding between Polyether-Ether-Ketone (PEEK) and Dental Resin Cement. Polymers (Basel) 2023; 15:polym15092114. [PMID: 37177258 PMCID: PMC10181231 DOI: 10.3390/polym15092114] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/23/2023] [Revised: 04/15/2023] [Accepted: 04/25/2023] [Indexed: 05/15/2023] Open
Abstract
The effects of alumina particle size and jet pressure on the bond strength of polyetheretherketone (PEEK) were examined to determine the airborne particle abrasion parameters with minimal effects on PEEK and to achieve optimal bond strength, as a reference for future clinical use. An alumina particle with four particle sizes and three jet pressures was used to air-abrade PEEK. Surface roughness (Ra), morphology, chemical structure, and wettability were analyzed using a stylus profilometer, scanning electron microscope, X-ray diffractometer, and contact angle analyzer, respectively. The shear bond strength (SBS) of PEEK and dental resin cement was analyzed using a universal testing machine (n = 10). The failure modes and debonded fracture surfaces were observed using optical microscopy. Airborne particle abrasion increased the Ra and hydrophobicity of PEEK and deposited alumina residues. The SBS generally decreased after thermal cycling. A large particle size damaged the PEEK surface. The effects of different particle sizes and jet pressures on the SBS were only significant in certain groups. Adhesive failure was the main mode for all groups. Within the limitations of this study, 110 μm grain-sized alumina particles combined with a jet pressure of 2 bar prevented damage to PEEK, providing sufficient SBS and bonding durability between PEEK and dental resin cement.
Collapse
Affiliation(s)
- Pao-Chieh Lee
- School of Dentistry, College of Dentistry, China Medical University, Taichung 40402, Taiwan
| | - Tzu-Yu Peng
- School of Dentistry, College of Oral Medicine, Taipei Medical University, Taipei 11031, Taiwan
- Research Center of Digital Oral Science and Technology, College of Oral Medicine, Taipei Medical University, Taipei 11031, Taiwan
| | - Tien-Li Ma
- Department of Materials Science and Engineering, National Taiwan University, Taipei 10617, Taiwan
| | - Kuan-Yu Chiang
- Research Center of Digital Oral Science and Technology, College of Oral Medicine, Taipei Medical University, Taipei 11031, Taiwan
- School of Dental Technology, College of Oral Medicine, Taipei Medical University, Taipei 11031, Taiwan
| | - Yuichi Mine
- Department of Medical Systems Engineering, Graduate School of Biomedical and Health Sciences, Hiroshima University, Hiroshima 734-8553, Japan
| | - I-Ta Lee
- School of Dentistry, College of Oral Medicine, Taipei Medical University, Taipei 11031, Taiwan
| | - Chang-Chiang Yu
- Research Center of Digital Oral Science and Technology, College of Oral Medicine, Taipei Medical University, Taipei 11031, Taiwan
- Happy Dental Clinic, Taichung 42950, Taiwan
| | - Su-Feng Chen
- School of Dentistry, College of Dentistry, China Medical University, Taichung 40402, Taiwan
- Research Center of Digital Oral Science and Technology, College of Oral Medicine, Taipei Medical University, Taipei 11031, Taiwan
| | - Jian-Hong Yu
- School of Dentistry, College of Dentistry, China Medical University, Taichung 40402, Taiwan
- Research Center of Digital Oral Science and Technology, College of Oral Medicine, Taipei Medical University, Taipei 11031, Taiwan
| |
Collapse
|
17
|
Strasser T, Wertz M, Koenig A, Koetzsch T, Rosentritt M. Microstructure, composition, and flexural strength of different layers within zirconia materials with strength gradient. Dent Mater 2023; 39:463-468. [PMID: 36907821 DOI: 10.1016/j.dental.2023.03.012] [Citation(s) in RCA: 9] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/15/2022] [Revised: 02/01/2023] [Accepted: 03/03/2023] [Indexed: 03/12/2023]
Abstract
OBJECTIVES The aim of this study was to compare composition, microstructure, and mechanical strength of current multilayer zirconia blanks. METHODS Bar shaped specimens were made from several layers of multilayer zirconia blanks (Cercon ht ML, Dentsply Sirona, US; Katana Zirconia YML, Kuraray, J;SHOFU Disk ZR Lucent Supra, Shofu, J; priti multidisc ZrO2 Multi Translucent, Pritidenta, D; IPS e.max ZirCAD Prime, Ivoclar Vivadent, FL). Flexural strength was determined in a three-point bending test on extra-thin bars. X-ray diffraction (XRD) with Rietveld refinement was used to assess crystal structure and scanning electron microscopy (SEM) imaging to visualize the microstructure of each material and layer. RESULTS Mean flexural strength varied between 467.5 ± 97.5 MPa (top layer, IPS e.max ZirCAD Prime) and 898.0 ± 188.5 MPa (bottom layer, Cercon ht ML) with significant (p ≤ 0.055) differences between the individual layers. XRD indicated 5Y-TZP for enamel-layers, 3Y-TZP for dentine-layers, individual mixtures of 3Y-TZP, 4Y-TZP, or 5 Y-TZP for intermediate layers. SEM analysis showed grain sizes between approx. 0.15 and 4 µm. Grain size tended to decrease from top to bottom layers. SIGNIFICANCE The investigated blanks differ predominantly in the intermediate layers. In addition to dimensioning of restorations, the milling position in the blanks must also be taken into account when using multilayer zirconia as restorative material.
Collapse
Affiliation(s)
- Thomas Strasser
- Department of Prosthetic Dentistry, University Hospital of Regensburg, 93053 Regensburg, Germany.
| | - Markus Wertz
- Department of Prosthodontics and Material Sciences, Leipzig University, 04103 Leipzig, Germany
| | - Andreas Koenig
- Department of Prosthodontics and Material Sciences, Leipzig University, 04103 Leipzig, Germany
| | - Torsten Koetzsch
- Institute of Mineralogy, Crystallography and Materials Science, Leipzig University, 04275 Leipzig, Germany
| | - Martin Rosentritt
- Department of Prosthetic Dentistry, University Hospital of Regensburg, 93053 Regensburg, Germany
| |
Collapse
|
18
|
Rafikova G, Piatnitskaia S, Shapovalova E, Chugunov S, Kireev V, Ialiukhova D, Bilyalov A, Pavlov V, Kzhyshkowska J. Interaction of Ceramic Implant Materials with Immune System. Int J Mol Sci 2023; 24:4200. [PMID: 36835610 PMCID: PMC9959507 DOI: 10.3390/ijms24044200] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/31/2022] [Revised: 01/30/2023] [Accepted: 02/07/2023] [Indexed: 02/22/2023] Open
Abstract
The immuno-compatibility of implant materials is a key issue for both initial and long-term implant integration. Ceramic implants have several advantages that make them highly promising for long-term medical solutions. These beneficial characteristics include such things as the material availability, possibility to manufacture various shapes and surface structures, osteo-inductivity and osteo-conductivity, low level of corrosion and general biocompatibility. The immuno-compatibility of an implant essentially depends on the interaction with local resident immune cells and, first of all, macrophages. However, in the case of ceramics, these interactions are insufficiently understood and require intensive experimental examinations. Our review summarizes the state of the art in variants of ceramic implants: mechanical properties, different chemical modifications of the basic material, surface structures and modifications, implant shapes and porosity. We collected the available information about the interaction of ceramics with the immune system and highlighted the studies that reported ceramic-specific local or systemic effects on the immune system. We disclosed the gaps in knowledge and outlined the perspectives for the identification to ceramic-specific interactions with the immune system using advanced quantitative technologies. We discussed the approaches for ceramic implant modification and pointed out the need for data integration using mathematic modelling of the multiple ceramic implant characteristics and their contribution for long-term implant bio- and immuno-compatibility.
Collapse
Affiliation(s)
- Guzel Rafikova
- Laboratory of Immunology, Institute of Urology and Clinical Oncology, Bashkir State Medical University, 450008 Ufa, Russia
| | - Svetlana Piatnitskaia
- Institute of Fundamental Medicine, Bashkir State Medical University, 450008 Ufa, Russia
| | - Elena Shapovalova
- Department of Chemistry, Tomsk State University, 634050 Tomsk, Russia
| | | | - Victor Kireev
- Institute of Fundamental Medicine, Bashkir State Medical University, 450008 Ufa, Russia
- Department of Applied Physics, Ufa University of Science and Technology, 450076 Ufa, Russia
| | - Daria Ialiukhova
- Institute of Fundamental Medicine, Bashkir State Medical University, 450008 Ufa, Russia
| | - Azat Bilyalov
- Institute of Fundamental Medicine, Bashkir State Medical University, 450008 Ufa, Russia
| | | | - Julia Kzhyshkowska
- Institute of Fundamental Medicine, Bashkir State Medical University, 450008 Ufa, Russia
- Department of Chemistry, Tomsk State University, 634050 Tomsk, Russia
- Institute of Transfusion Medicine and Immunology, Mannheim Institute of Innate Immunosciecnes (MI3), Medical Faculty Mannheim, Heidelberg University, 69117 Mannheim, Germany
- German Red Cross Blood Service Baden-Württemberg, 68167 Mannheim, Germany
| |
Collapse
|
19
|
Innovation Glass-Ceramic Spray Deposition Technology Improving the Adhesive Performance for Zirconium-Based Dental Restorations. Int J Mol Sci 2022; 23:ijms232112783. [PMID: 36361575 PMCID: PMC9657378 DOI: 10.3390/ijms232112783] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/09/2022] [Revised: 10/18/2022] [Accepted: 10/19/2022] [Indexed: 12/04/2022] Open
Abstract
Glass-ceramic spray deposition (GCSD) is a novel technique for coating lithium disilicate (LD) glass-ceramics onto zirconia through simple tempering steps. GCSD has been proven to improve the bonding of zirconia to resin cement, but the effect of etching time on GCSD and the long-term durability of the bond achieved remain unknown. The effects of air abrasion with aluminum particles (ABB) and air abrasion (GAB) or etching with 5.0% hydrogen fluoride (HF) for 20, 60, 90, and 120 s (G20, G60, G90, and G120) on the resin cement−zirconia bond were studied. LD was included as a control (LDG). The microstructure, sub-micron roughness, wettability, and phase changes of samples were analyzed. After resin cement was bonded to zirconia, half of the samples were subjected to thermocycling (5000 cycles at 5−55 °C). The bond strengths of the samples were determined in shear bond strength (SBS) tests (n = 10 per group). An LD structure can be formed on zirconia after GCSD and proper etching processes, which result in high roughness and a hydrophilic nature. GCSD and HF etching significantly improved SBS, with G90 and G120 samples with pre- or post-thermocycling exhibiting SBS values comparable to those of LDG (p > 0.760). The surface characteristics of the LD layer are influenced by the etching time and affect the SBS of the bond of zirconia to resin cement. HF etching for 90−120 s after GCSD results in zirconia with SBS and bond durability comparable to LD.
Collapse
|