Monitoring of erosive tooth wear: what to use and when to use it

Identifying clusters of raters with a common notion of diagnosing erosive tooth wear: a step towards improving the accuracy of diagnostic procedures

BACKGROUND

Heterogeneous results are to be expected when multiple raters diagnose whether the dentine of a tooth with erosive tooth wear (ETW) is exposed or not. Identification of notions (fundamental concepts and understanding) about the diagnostic problem shared by groups of raters can be helpful to develop guidelines and to optimize teaching and calibration procedures. We aim to illustrate how clusters of raters with a common notion can be identified and how first insights about the notions can be obtained.

METHODS

This investigation is based on a former study in which 49 tooth surfaces affected by ETW were rated visually by 61 raters (23 scientists, 18 university dentists, 20 dental students) in terms of dentine exposed or not. The true status was determined histologically. Gender, age, professional experience, and specialization of the raters were documented. An algorithm was used to search for clusters of raters with high agreement in their ratings suggesting a common notion. The clusters identified were examined with respect to various aspects.

RESULTS

Four clusters of raters with high agreement could be found. The ratings of the raters in the cluster with the lowest diagnostic accuracy showed the highest correlation with the degree of tissue loss and the background tooth color, whereas the correlation with tissue loss was least in the cluster with highest diagnostic accuracy. The 15 raters of the latter cluster covered both students and dentists with or without specialization in erosion/cariology and/or long experience. This suggests that similar conceptual understanding of ETW can exist independent of professional experience.

CONCLUSIONS

The described methodology is useful to identify clusters of raters with a common notion about a specific diagnostic problem. The cluster-specific notions can be further examined based on existing study data or by group-based interviews of the raters of a cluster. This methodology allows investigators to learn more about useful or useless cues in diagnostic decision-making. This information can facilitate development or enhancement of guidelines on diagnostic decision-making.

Automated monitoring of tooth wear progression using AI on intraoral scans

OBJECTIVES

This study aimed to develop and evaluate a fully automated method for visualizing and measuring tooth wear progression using pairs of intraoral scans (IOSs) in comparison with a manual protocol.

METHODS

Eight patients with severe tooth wear progression were retrospectively included, with IOSs taken at baseline and 1-year, 3-year, and 5-year follow-ups. For alignment, the automated method segmented the arch into separate teeth in the IOSs. Tooth pair registration selected tooth surfaces that were likely unaffected by tooth wear and performed point set registration on the selected surfaces. Maximum tooth profile losses from baseline to each follow-up were determined based on signed distances using the manual 3D Wear Analysis (3DWA) protocol and the automated method. The automated method was evaluated against the 3DWA protocol by comparing tooth segmentations with the Dice-Sørensen coefficient (DSC) and intersection over union (IoU). The tooth profile loss measurements were compared with regression and Bland-Altman plots. Additionally, the relationship between the time interval and the measurement differences between the two methods was shown.

RESULTS

The automated method completed within two minutes. It was very effective for tooth instance segmentation (826 teeth, DSC = 0.947, IoU = 0.907), and a correlation of 0.932 was observed for agreement on tooth profile loss measurements (516 tooth pairs, mean difference = 0.021mm, 95% confidence interval = [-0.085, 0.138]). The variability in measurement differences increased for larger time intervals.

CONCLUSIONS

The proposed automated method for monitoring tooth wear progression was faster and not clinically significantly different in accuracy compared to a manual protocol for full-arch IOSs.

CLINICAL SIGNIFICANCE

General practitioners and patients can benefit from the visualization of tooth wear, allowing quantifiable and standardized decisions concerning therapy requirements of worn teeth. The proposed method for tooth wear monitoring decreased the time required to less than two minutes compared with the manual approach, which took at least two hours.

The role of orthodontics in the management of tooth wear

Pathological tooth wear is a dental problem that affects all age groups and appears to be increasing in prevalence. A subset of these patients may benefit from a combination of orthodontic and restorative care which will be discussed in this article. Orthodontics can help to create the necessary vertical, anterior-posterior and mesio-distal space for restorative work, reducing the need for tooth reduction and lessening the biological costs of restorative care, helping to reposition the gingival margins where this impacts upon aesthetics, as well as correcting co-existing malocclusion.

Evaluation of wear resistance and surface properties of additively manufactured restorative dental materials

OBJECTIVES

To evaluate the wear resistance of three additively manufactured dental crown materials (NextDent C&B MFH, Saremco print CROWNTEC and Bego VarseoSmile Crown) under two environmental conditions (dry and artificial saliva), two loads (49 N and 70 N) and two surface treatments (polished and glazed).

METHODS

A total of 120 specimens were divided into 24 groups and tested for wear under two loads (49 N and 70 N), surface treatment (polished or glazed), and environment (dry or submerged in artificial saliva). All samples underwent reciprocating wear testing at 1 Hz using a wear simulator, replicating 48 months of In Vivo conditions with a stainless-steel ball as the antagonist. The coefficient of friction (CoF), surface roughness, volumetric and vertical wear loss were measured and statistically analysed. Confocal microscopy assessed the surface properties of crown materials and the antagonists.

RESULTS

The NextDent material demonstrated the most homogenous wear, with relatively low vertical and volumetric loss across all groups (p < 0.004). NextDent and Bego materials performed similarly in artificial saliva regardless of the load type (p > 1.000). The CoF remained below 0.3 for all groups. All groups exhibited significant increases in surface roughness after testing, however, this did not correlate with an increase in the CoF. Confocal analysis revealed material deformities due to load and notable scratch marks on the stainless-steel antagonists.

CONCLUSION

It was found that all investigated addtively manufactured materials can be suggested for provisional use. Both vertical loss and volumetric loss results should be included for material evaluation. CoF and surface roughness should be implemented into wear evaluation.

CLINICAL SIGNIFICANCE

This study highlights the practical value of additively manufactured dental crown materials, particularly for provisional restorations. However, their extended use requires careful consideration of individual patient needs, emphasising the need for judicious clinical application evaluation.

Assessing tooth wear progression in non-human primates: a longitudinal study using intraoral scanning technology

Intraoral scanners are widely used in a clinical setting for orthodontic treatments and tooth restorations, and are also useful for assessing dental wear and pathology progression. In this study, we assess the utility of using an intraoral scanner and associated software for quantifying dental tissue loss in non-human primates. An upper and lower second molar for 31 captive hamadryas baboons (Papio hamadryas) were assessed for dental tissue loss progression, giving a total sample of 62 teeth. The animals are part of the Southwest National Primate Research Center and were all fed the same monkey-chow diet over their lifetimes. Two molds of each dentition were taken at either two- or three-year intervals, and the associated casts scanned using an intraoral scanner (Medit i700). Tissue loss was calculated in WearCompare by superimposition of the two scans followed by subtraction analysis. Four individuals had dental caries, and were assessed separately. The results demonstrate the reliability of these techniques in capturing tissue loss data, evidenced by the alignment consistency between scans, lack of erroneous tissue gain between scans, and uniformity of tissue loss patterns among individuals (e.g., functional cusps showing the highest degree of wear). The average loss per mm2 per year for all samples combined was 0.05 mm3 (0.04 mm3 for females and 0.08 mm3 for males). There was no significant difference in wear progression between upper and lower molars. Substantial variation in the amount of tissue loss among individuals was found, despite their uniform diet. These findings foster multiple avenues for future research, including the exploration of wear progression across dental crowns and arcades, correlation between different types of tissue loss (e.g., attrition, erosion, fractures, caries), interplay between tissue loss and microwear/topographic analysis, and the genetic underpinnings of tissue loss variation.

Tooth Wear Evaluation System 2.0-Evaluation of diagnostic reliability in the assessment of signs and symptoms for tooth wear by non-experts

BACKGROUND

Tooth wear is a multifactorial condition that manifests through various signs and symptoms. These individual signs and symptoms were described in multiple studies, leading to the inclusion in TWES 2.0 (Tooth Wear Evaluation System 2.0) and the forthcoming DC-TW (Diagnostic Criteria for Tooth Wear). However, a study evaluating their reliability has yet to be conducted.

OBJECTIVE

The aim of the study was to examine the reliability in the assessment of 6 signs of pathological tooth wear and 18 clinical signs and symptoms determining aetiology, all of which are included in the TWES 2.0/DC-TW.

METHODS

48 dental students (operators) evaluated patient cases from a patient pool of 14 patients on dental casts and high-resolution intraoral photographs. The agreement between all operators for each sign and symptom was calculated based on ICC (Intraclass Correlation Coefficients). Additionally, the agreement of each operator's evaluation with a predefined sample solution was calculated based on Cohen's kappa.

RESULTS

Inter-user agreement ranged from near perfect (0.91) to poor (0.02) for the various pathology signs or aetiology symptoms of tooth wear (mean 0.32). The agreements of the operator's ratings compared to the sample solution resulted in Cohen's kappa from 0.18 to 1 (mean 0.59) for the pathology signs and ranged from 0.02 to 0.51 for the aetiology signs (mean 0.38).

CONCLUSIONS

The reliability of the signs and symptoms examined and the ability of individual investigators to correctly identify and assign signs and symptoms varied widely. The current assessment tools for the qualification of tooth wear need further refinement, and examiners need intensive training in tooth wear assessment.

Tooth Wear in Older Adults: A Review of Clinical Studies

INTRODUCTION

Tooth wear is a prevalent dental condition among older adults, leading to pain and adversely affecting aesthetics, functionality, and their overall quality of life. This review aims to update the information on tooth wear in older adults from the past five years and to provide guidance on the clinical management of tooth wear in older adults.

METHODS

A literature search was conducted in three electronic databases, Scopus, Pubmed, and Embase, for English publications from January 2019 to December 2023 on clinical studies with participants aged 65 or above on tooth wear. A total of 307 articles were retrieved and 14 articles were finally included as references for this study.

RESULTS

This review highlights the common causes of tooth wear and various risk factors, such as medical conditions, hyposalivation, dietary habits, oral hygiene practices, parafunctional habits, and occlusal factors, associated with tooth wear. It is crucial for oral health care professionals to diagnose and manage tooth wear at an early stage through a risk assessment and a clinical examination to avoid complex restorative procedures. Tooth wear management should prioritize prevention, aiming to control etiological and risk factors while employing non-restorative treatments. Restorative intervention, if indicated, should be simple, minimally invasive, and cost-effective. Tooth wear progression should be monitored regularly to determine if a further intervention is needed.

CONCLUSION

Since the clinical studies on tooth wear in older adults over the past five years are limited and mainly cross-sectional, more interventional clinical studies are warranted to provide more clinical guidance on tooth wear management in older adults.