Hydrogen spillover through Matryoshka-type (ZIFs@)n-1ZIFs nanocubes

Rearranging Spin Electrons by Axial-Ligand-Induced Orbital Splitting to Regulate Enzymatic Activity of Single-Atom Nanozyme with Destructive d-π Conjugation

Most of the nanozymes have been obtained based on trial and error, for which the application is usually compromised by enzymatic activity regulation due to a vague catalytic mechanism. Herein, a hollow axial Mo-Pt single-atom nanozyme (H-MoN5@PtN4/C) is constructed by a two-tier template capture strategy. The axial ligand can induce Mo 4d orbital splitting, leading to a rearrangement of spin electrons (↑ ↑ → ↑↓) to regulate enzymatic activity. This creates catalase-like activity and enhances oxidase-like activity to catalyze cascade enzymatic reactions (H2O2 → O2 → O2•-), which can overcome tumor hypoxia and accumulate cytotoxic superoxide radicals (O2•-). Significantly, H-MoN5@PtN4/C displays destructive d-π conjugation between the metal and substrate to attenuate the restriction of orbitals and electrons. This markedly improves enzymatic performance (catalase-like and oxidase-like activity) of a Mo single atom and peroxidase-like properties of a Pt single atom. Furthermore, the H-MoN5@PtN4/C can deplete overexpressed glutathione (GSH) through a redox reaction, which can avoid consumption of ROS (O2•- and •OH). As a result, H-MoN5@PtN4/C can overcome limitations of a complex tumor microenvironment (TME) for tumor-specific therapy based on TME-activated catalytic activity.

Cobalt Single-Atom Reverse Hydrogen Spillover for Efficient Electrochemical Water Dissociation and Dechlorination

Efficient water dissociation to atomic hydrogen (H*) with restrained recombination of H* is crucial for improving the H* utilization for electrochemical dechlorination, but is currently limited by the lack of feasible electrodes. Herein, we developed a monolithic single-atom electrode with Co single atoms anchored on the inherent oxide layer of titanium foam (Co1-TiOx/Ti), which can efficiently dissociate water into H* and simultaneously inhibit the recombination of H*, by taking advantage of the single-atom reverse hydrogen spillover effect. Experimental and theoretical calculations demonstrated that H* could be rapidly generated on the oxide layer of titanium foam, and then overflowed to the adjacent Co single atom for the reductive dechlorination. Using chloramphenicol as a proof-of-concept verification, the resulting Co1-TiOx/Ti monolithic electrode exhibited an unprecedented performance with almost 100 % dechlorination at -1.0 V, far superior to that of traditional indirect reduction-driven commercial Pd/C (52 %) and direct reduction-driven Co1-N-C (44 %). Moreover, its dechlorination rate constant of 1.64 h-1 was 4.3 and 8.6 times more active than those of Pd/C (0.38 h-1) and Co1-N-C (0.19 h-1), respectively. Our research sheds light on the rational design of hydrogen spillover-related electrocatalysts to simultaneously improve the H* generation, transfer, and utilization for environmental and energy applications.

Mg-MOF-74 Derived Defective Framework for Hydrogen Storage at Above-Ambient Temperature Assisted by Pt Catalyst

Metal-organic frameworks (MOFs) are promising candidates for room-temperature hydrogen storage materials after modification, thanks to their ability to chemisorb hydrogen. However, the hydrogen adsorption strength of these modified MOFs remains insufficient to meet the capacity and safety requirements of hydrogen storage systems. To address this challenge, a highly defective framework material known as de-MgMOF is prepared by gently annealing Mg-MOF-74. This material retains some of the crystal properties of the original Mg-MOF-74 and exhibits exceptional hydrogen storage capacity at above-ambient temperatures. The MgO5 knots around linker vacancies in de-MgMOF can adsorb a significant amount of dissociated and nondissociated hydrogen, with adsorption enthalpies ranging from -22.7 to -43.6 kJ mol-1, indicating a strong chemisorption interaction. By leveraging a spillover catalyst of Pt, the material achieves a reversible hydrogen storage capacity of 2.55 wt.% at 160 °C and 81 bar. Additionally, this material offers rapid hydrogen uptake/release, stable cycling, and convenient storage capabilities. A comprehensive techno-economic analysis demonstrates that this material outperforms many other hydrogen storage materials at the system level for on-board applications.

Construction of Interlayer Coupling Diatomic Nanozyme with Peroxidase-Like and Photothermal Activities for Efficient Synergistic Antibacteria

Pathogenic bacteria are the main cause of bacterial infectious diseases, which have posed a grave threat to public health. Single-atom nanozymes have emerged as promising candidates for antibacterial applications, but their activities need to be further improved. Considering diatomic nanozymes exhibit superior metal loading capacities and enhanced catalytic performance, a new interlayer coupling diatomic nanozyme (IC-DAN) is constructed by modulating the coordination environment in an atomic-level engineering. It is well demonstrated that IC-DAN exhibited superior peroxidase-mimetic activity in the presence of H2O2 to yield abundant ∙OH and possessed high photothermal conversion ability, which synergistically achieves efficient antibacterial therapy. Therefore, IC-DAN shows great potential used as antibacterial agent in clinic and this study open a new route to developing high-performance artificial enzymes.

Spectroscopic visualization of reversible hydrogen spillover between palladium and metal-organic frameworks toward catalytic semihydrogenation

Hydrogen spillover widely occurs in a variety of hydrogen-involved chemical and physical processes. Recently, metal-organic frameworks have been extensively explored for their integration with noble metals toward various hydrogen-related applications, however, the hydrogen spillover in metal/MOF composite structures remains largely elusive given the challenges of collecting direct evidence due to system complexity. Here we show an elaborate strategy of modular signal amplification to decouple the behavior of hydrogen spillover in each functional regime, enabling spectroscopic visualization for interfacial dynamic processes. Remarkably, we successfully depict a full picture for dynamic replenishment of surface hydrogen atoms under interfacial hydrogen spillover by quick-scanning extended X-ray absorption fine structure, in situ surface-enhanced Raman spectroscopy and ab initio molecular dynamics calculation. With interfacial hydrogen spillover, Pd/ZIF-8 catalyst shows unique alkyne semihydrogenation activity and selectivity for alkynes molecules. The methodology demonstrated in this study also provides a basis for further exploration of interfacial species migration.

Hybrid organic frameworks: Synthesis strategies and applications in photocatalytic wastewater treatment - A review

Hybrid organic framework materials are a class of hierarchical porous crystalline materials that have emerged in recent years, composed of three types of porous crystal materials, namely metal-organic frameworks (MOFs), covalent organic frameworks (COFs), and hydrogen-bonded organic frameworks (HOFs). The combination of various organic framework properties in hybrid organic frameworks generates synergistic effects, which has attracted widespread attention from researchers. The synthesis methods of hybrid organic frameworks are also an intriguing topic, enabling the formation of core-shell heterostructures through epitaxial growth, template conversion, medium growth, or direct combination. These hybrid organic framework materials have demonstrated remarkable performance in the application of photocatalytic wastewater purification and have developed various forms of applications. This article reviews the preparation principles and methods of various hybrid organic frameworks and provides a detailed overview of the research progress of photocatalytic water purification hybrid organic frameworks. Finally, the challenges and development prospects of hybrid organic framework synthesis and their application in water purification are briefly discussed.

Engineering FeCo Dual Sites on Tube-on-Plate Hollow Structure for Efficient Oxygen Electroreduction

Atomically dispersed single-atom catalysts are intriguing catalysts in the field of electrocatalysis for nearly 100% exploitation of metal atoms. However, they are still far from practical usage due to the scaling relationship limit and metal loading limit. Generation of a diatomic complex would offer superior catalytic performance through the cooperation of two neighboring atoms as active sites. Herein, Fe/Co dual atomic sites embedded in a tube-on-plate hollow structure are designed and fabricated for an efficient electrochemical oxygen reduction reaction (ORR). The unique structure composed of ultrathin nanotube building blocks dramatically maximizes the surface area for copious active site exposure. Thanks to the synergetic interaction between Fe/Co pairs, the obtained FeCo/NC exhibits outstanding ORR activity and stability in alkaline media. Furthermore, density functional theory calculations have revealed that the remarkable activity is attributed to the electron-deficient Fe sites in FeCoN6. This work may pave the way for the innovative design of highly dispersed dual-site catalysts for broader applications in the realm of electrochemical catalysis.

Hydrogen Spillover-Driven Dynamic Evolution and Migration of Iron Oxide for Structure Regulation of Versatile Magnetic Nanocatalysts

Magnetic nanocatalysts with properties of easy recovery, induced heating, or magnetic levitation play a crucial role in advancing intelligent techniques. Herein, we report a method for the synthesis of versatile core-shell-type magnetic nanocatalysts through "noncontact" hydrogen spillover-driven reduction and migration of iron oxide with the assistance of Pd. In situ analysis techniques were applied to visualize the dynamic evolution of the magnetic nanocatalysts. Pd facilitates the dissociation of hydrogen molecules into activated H*, which then spills and thus drives the iron oxide reduction, gradual outward split, and migration through the carbonaceous shell. By controlling the evolution stage, nanocatalysts having diverse architectures including core-shell, split core-shell, or hollow type, each featuring Pd or PdFe loaded on the carbon shell, can be obtained. As a showcase, a magnetic nanocatalyst (Pd-loaded split core-shell) can hydrogenate crotonaldehyde to butanal (26 624 h-1 in TOF, ∼100% selectivity), outperforming reported Pd-based catalysts. This is due to the synergy of the enhanced local magnetothermal effect and the preferential adsorption of -C═C on Pd with a small d bandwidth. Another catalyst (PdFe-loaded split core-shell) also delivers a robust performance in phenylacetylene semihydrogenation (100% conversion, 97.5% selectivity) as PdFe may inhibit the overhydrogenation of -C═C. Importantly, not only Pd, other noble metals (e.g., Pt, Ru, and Au) also showed a similar property, revealing a general rule that hydrogen spillover drives the dynamic reduction, splitting, and migration of encapsulated nanosized iron oxide, resulting in diverse structures. This study would offer a structure-controllable fabrication of high-performance magnetic nanocatalysts for various applications.

Strained few-layer MoS2 with atomic copper and selectively exposed in-plane sulfur vacancies for CO2 hydrogenation to methanol

In-plane sulfur vacancies (Sv) in molybdenum disulfide (MoS2) were newly unveiled for CO2 hydrogenation to methanol, whereas edge Sv were found to facilitate methane formation. Thus, selective exposure and activation of basal plane is crucial for methanol synthesis. Here, we report a mesoporous silica-encapsulated MoS2 catalysts with fullerene-like structure and atomic copper (Cu/MoS2@SiO2). The main approach is based on a physically constrained topologic conversion of molybdenum dioxide (MoO2) to MoS2 within silica. The spherical curvature enables the generation of strain and Sv in inert basal plane. More importantly, fullerene-like structure of few-layer MoS2 can selectively expose in-plane Sv and reduce the exposure of edge Sv. After promotion by atomic copper, the resultant Cu/MoS2@SiO2 exhibits stable specific methanol yield of 6.11 molMeOH molMo-1 h-1 with methanol selectivity of 72.5% at 260 °C, much superior to its counterparts lacking the fullerene-like structure and copper decoration. The reaction mechanism and promoting role of copper are investigated by in-situ DRIFTS and in-situ XAS. Theoretical calculations demonstrate that the compressive strain facilitates Sv formation and CO2 hydrogenation, while tensile strain accelerates the regeneration of active sites, rationalizing the critical role of strain.

Water-assisted hydrogen spillover in Pt nanoparticle-based metal-organic framework composites

Hydrogen spillover is the migration of activated hydrogen atoms from a metal particle onto the surface of catalyst support, which has made significant progress in heterogeneous catalysis. The phenomenon has been well researched on oxide supports, yet its occurrence, detection method and mechanism on non-oxide supports such as metal-organic frameworks (MOFs) remain controversial. Herein, we develop a facile strategy for efficiency enhancement of hydrogen spillover on various MOFs with the aid of water molecules. By encapsulating platinum (Pt) nanoparticles in MOF-801 for activating hydrogen and hydrogenation of C=C in the MOF ligand as activated hydrogen detector, a research platform is built with Pt@MOF-801 to measure the hydrogenation region for quantifying the efficiency and spatial extent of hydrogen spillover. A water-assisted hydrogen spillover path is found with lower migration energy barrier than the traditional spillover path via ligand. The synergy of the two paths explains a significant boost of hydrogen spillover in MOF-801 from imperceptible existence to spanning at least 100-nm-diameter region. Moreover, such strategy shows universality in different MOF and covalent organic framework materials for efficiency promotion of hydrogen spillover and improvement of catalytic activity and antitoxicity, opening up new horizons for catalyst design in porous crystalline materials.

Disentangling Local Interfacial Confinement and Remote Spillover Effects in Oxide-Oxide Interactions

Supported oxides are widely used in many important catalytic reactions, in which the interaction between the oxide catalyst and oxide support is critical but still remains elusive. Here, we construct a chemically bonded oxide-oxide interface by chemical deposition of Co3O4 onto ZnO powder (Co3O4/ZnO), in which complete reduction of Co3O4 to Co0 has been strongly impeded. It was revealed that the local interfacial confinement effect between Co oxide and the ZnO support helps to maintain a metastable CoOx state in CO2 hydrogenation reaction, producing 93% CO. In contrast, a physically contacted oxide-oxide interface was formed by mechanically mixing Co3O4 and ZnO powders (Co3O4-ZnO), in which reduction of Co3O4 to Co0 was significantly promoted, demonstrating a quick increase of CO2 conversion to 45% and a high selectivity toward CH4 (92%) in the CO2 hydrogenation reaction. This interface effect is ascribed to unusual remote spillover of dissociated hydrogen species from ZnO nanoparticles to the neighboring Co oxide nanoparticles. This work clearly illustrates the equally important but opposite local and remote effects at the oxide-oxide interfaces. The distinct oxide-oxide interactions contribute to many diverse interface phenomena in oxide-oxide catalytic systems.

Lactate-Responsive Gene Editing to Synergistically Enhance Macrophage-Mediated Cancer Immunotherapy

Combination therapies involving metabolic regulation and immune checkpoint blockade are considered an encouraging new strategy for cancer therapy. However, the effective utilization of combination therapies for activating tumor-associated macrophages (TAMs) remains challenging. Herein, a lactate-catalyzed chemodynamic approach to activate the therapeutic genome editing of signal-regulatory protein α (SIRPα) to reprogram TAMs and improve cancer immunotherapy is proposed. This system is constructed by encapsulating lactate oxidase (LOx) and clustered regularly interspaced short palindromic repeat-mediated SIRPα genome-editing plasmids in a metal-organic framework (MOF). The genome-editing system is released and activated by acidic pyruvate, which is produced by the LOx-catalyzed oxidation of lactate. The synergy between lactate exhaustion and SIRPα signal blockade can enhance the phagocytic ability of TAMs and promote the repolarization of TAMs to the antitumorigenic M1 phenotype. Lactate exhaustion-induced CD47-SIRPα blockade efficiently improves macrophage antitumor immune responses and effectively reverses the immunosuppressive tumor microenvironment to inhibit tumor growth, as demonstrated by in vitro and in vivo studies. This study provides a facile strategy for engineering TAMs in situ by combining CRISPR-mediated SIRPα knockout with lactate exhaustion for effective immunotherapy.

Hydrogen Spillover-Accelerated Selective Hydrogenation on WO3 with ppm-Level Pd

Hydrogen spillover from the metal to the support opens a fresh avenue to design dual-active site catalysts for selective hydrogenation. However, very limited knowledge has been obtained to reveal the relationship between the capacity of hydrogen spillover and catalytic performance of hydrogenation. Herein, hydrogen spillover-dependent selective hydrogenation has been demonstrated on WO₃-supported ppm-level Pd (PdHD/WO₃), where the *H species generated and spilled from Pd to WO₃ are readily utilized for addition of a reactant. The WO₃ supports with a hexagonal phase and a suitable oxygen defect concentration can enhance the capacity of hydrogen spillover, significantly accelerating the catalytic activity of PdHD/WO₃. For the hydrogenation of 4-chloronitrobenzene, the PdHD/WO₃ catalysts with the highest capacity of hydrogen spillover yielded a turnover frequency (TOF) of 47,488 h^-1 (33 times higher than that of traditional Pd/C). Meanwhile, benefiting from the hydrogen spillover, the unique adsorption of 4-chloronitrobenzene via the nitro group on the oxygen vacancy of WO₃ guaranteed >99.9% selectivity of 4-chloroaniline during the whole hydrogenation. This work thus helps to create an effective method for fabricating cost-effective nanocatalysts with an extremely low Pd loading for the ideal hydrogenation with extremely high activity and selectivity.

Engineering sensitive gas sensor based on MOF-derived hollow metal-oxide semiconductor heterostructures

Metal-organic frameworks (MOFs) derived hollow heterostructured metal oxide semiconductors (MOSs) are a class of functional porous materials exhibiting distinctive physiochemical properties. Owing to the unique advantages, including large specific surface, high intrinsic catalytic performance, abundant channels for facilitating electron transfer and mass transport, and strong synergistic effect between different components, MOF-derived hollow MOSs heterostructures can work as promising candidates for gas sensing, which have thus attracted increasing attention. Aiming to provide a deep understanding on the design strategy and MOSs heterostructure, this review presents a comprehensive overview on the advantages and applications of MOF-derived hollow MOSs heterostructures when they used n for the detection of toxic gases. In addition, a deep discussion about the perspective and challenge of this interesting field is also well organized, hoping to provide guidance for the future design and development of more accurate gas sensors.

Intensifying Hydrogen Spillover for Boosting Electrocatalytic Hydrogen Evolution Reaction

Hydrogen spillover has attracted increasing interests in the field of electrocatalytic hydrogen evolution reaction (HER) in recent years because of their distinct reaction mechanism and beneficial terms for simultaneously weakening the strong hydrogen adsorption on metal and strengthening the weak hydrogen adsorption on support. By taking advantageous merits of efficient hydrogen transfer, hydrogen spillover-based binary catalysts have been widely investigated, which paves a new way for boosting the development of hydrogen production by water electrolysis. In this paper, we summarize the recent progress of this interesting field by focusing on the advanced strategies for intensifying the hydrogen spillover towards HER. In addition, the challenging issues and some perspective insights in the future development of hydrogen spillover-based electrocatalysts are also systematically discussed.

Photo-controllable heterostructured crystals of metal-organic frameworks via reversible photocycloaddition

Metal-organic framework (MOF)-based heterostructures are attractive because they can provide versatile platforms for various applications but are limited by complex liquid epitaxial growth methods. Here, we employ photolithography to fabricate and control MOF-based heterostructured crystals via [4 + 4] photocycloaddition. A layered dysprosium-dianthracene framework, [Dy(NO3)3(depma2)1.5]·(depma2)0.5 (2) [depma2 = pre-photodimerized 9-diethylphosphonomethylanthracene (depma)] underwent a single-crystal-to-single-crystal transition at 140 °C to form [Dy(NO3)3(depma)(depma2)]·(depma2)0.5 (3). The dissociated anthracene moieties are face-to-face π-π interacted allowing a reversible photocycloaddition between 2 and 3. This structural transformation causes a luminescence switch between blue and yellow-green and thus can be used to fabricate erasable 2 + 3 heterostructured crystals for rewritable photonic barcodes. The internal strain at the heterostructure interface leads to photobending and straightening of the crystal, a photomechanical response that is fast, reversible and durable, even operating at 140 °C, making it promising for photoactuation. This work may inspire the development of intelligent MOF-based heterostructures for photonic applications.

The Nature of Interfacial Catalysis over Pt/NiAl2O4 for Hydrogen Production from Methanol Reforming Reaction

Reforming of methanol is one of the most favorable chemical processes for on-board H₂ production, which alleviates the limitation of H₂ storage and transportation. The most important catalytic systems for methanol reacting with water are interfacial catalysts including metal/metal oxide and metal/carbide. Nevertheless, the assessment on the reaction mechanism and active sites of these interfacial catalysts are still controversial. In this work, by spectroscopic, kinetic, and isotopic investigations, we established a compact cascade reaction model (ca. the Langmuir-Hinshelwood model) to describe the methanol and water activation over Pt/NiAl₂O₄. We show here that reforming of methanol experiences methanol dehydrogenation followed by water-gas shift reaction (WGS), in which two separated kinetically relevant steps have been identified, that is, C-H bond rupture within methoxyl adsorbed on interface sites and O-H bond rupture within O_lH (O_l: oxygen-filled surface vacancy), respectively. In addition, these two reactions were primarily determined by the most abundant surface intermediates, which were methoxyl and CO species adsorbed on NiAl₂O₄ and Pt, respectively. More importantly, the excellent reaction performance benefits from the following bidirectional spillover of methoxyl and CO species since the interface and the vacancies on the support were considered as the real active component in methanol dehydrogenation and the WGS reaction, respectively. These findings provide deep insight into the reaction process as well as the active component during catalysis, which may guide the design of new catalytic systems.

Zn-Co metal organic frameworks coated with chitosand and Au nanoparticles for chemo-photothermal-targeted combination therapy of liver cancer

The toxic effects of chemotherapy drugs on normal tissues are still a major limiting factor in cancer treatment. In this paper, we report a metal-organic framework (Zn-Co ZIF) with chitosan-coated outer layer as a carrier for the drug adriamycin hydrochloride (DOX), a treatment for liver cancer, as a novel anti-cancer nanodrug-enhanced carrier. Gold nanoparticles, a good photothermal conversion agent, were combined with the target SH-RGD during surface functionalisation to prepare Zn-Co ZIF@DOX-CS-Au-RGD (ZD-CAR), a nanoplatform with good photothermal conversion properties and targeting for combined liver cancer therapy. ZD-CAR was developed after RGD accurately targeted the tumour and entered the tumour microenvironment (TME), it cleaves and releases the liver cancer therapeutic agent (DOX) in a weak acidic environment to effectively kill tumour cells. The metal skeleton cleavage releases Co²⁺, which catalyzes the production of oxygen from H₂O₂ to alleviate the tumour hypoxic environment. The dissolved oxygen could reach 14 mg/L after adding 80 mg/mL of ZD-CAR. Meanwhile, gold nanoparticles could convert light energy into heat energy under 808 NIR irradiation to induce local superheating and kill tumour cells. In summary, this study developed a nanoplatform that combines chemo-photothermal-targeted therapy. It has shown good therapeutic effeciency in cellular experiments and performance tests and has promising applications in anti-cancer therapy.

Recent research progress in CDs@MOFs composites: fabrication, property modulation, and application

Carbon dots (CDs) have exhibited a promising application prospect in many fields because of their good fluorescence properties, biocompatibility, low toxicity, and easy functionalization. In order to improve their photoelectricity and stability, metal-organic frameworks (MOFs) can be used as host materials to provide ideal carriers for CDs to realize the multifunctional composites of CDs and MOFs (CDs@MOFs). At present, CDs@MOFs composites have shown tremendous application potential because they have various advantages of both CDs and MOFs. In this review, the synthesis methods of CDs@MOFs composites are firstly introduced. Then, the influence of the synergy between CDs and MOFs on the regulation of their structures and optical properties is highlighted. Furthermore, the recent application researches of CDs@MOFs composites in fluorescent probes, solid-state lighting, and photoelectrocatalysis are generalized. Finally, the critical issues, challenges, and solutions on their structure and property regulation and application are put forward, and their commercialization direction is also prospected.

Semi-hydrogenation of α,β-unsaturated aldehydes over sandwich-structured nanocatalysts prepared by phase transformation of thin-film Al2O3 to Al-TCPP

The semi-hydrogenation of α,β-unsaturated aldehydes to the desired unsaturated alcohols with both high conversion and high selectivity remains a big challenge. Herein, we designed a sandwich-structured nanocatalyst for the highly selective hydrogenation of various α,β-unsaturated aldehydes (e.g., cinnamaldehyde, furfural, crotonaldehyde, and 3-methyl-2-butenal) to the targeted unsaturated alcohols. Highly accessible platinum nanoparticles were sandwiched between a metal-organic framework (MOF) core (i.e., MIL-88B(Fe)) and a MOF shell (i.e., Al-TCPP). In particular, the growth of the Al-TCPP shell was achieved by atomic layer deposition (ALD) of thin-film Al₂O₃ followed by phase transformation with a tetrakis(4-carboxyphenyl)porphyrin (H₄TCPP) linker. The thickness of the Al-TCPP shell can be finely controlled by adjusting the cycle number of alumina ALD and the concentration of the H₄TCPP linker during the phase transformation of Al₂O₃ to Al-TCPP. It was proven that the permeable MOF shells could serve as selectivity regulators for the activation of the CO bonds in α,β-unsaturated aldehydes (in preference to the CC bonds), leading to higher selectivity towards unsaturated alcohols as compared to the conventional surface supported Pt catalysts. Mechanistic insights showed that the enhanced catalytic performance was attributed to (i) the modified electronic state of sandwiched Pt nanoparticles by the two MOF layers and (ii) the steric hindrance effect on substrate diffusion through the sandwich-structured catalysts.

Recent Progress Using Solid-State Materials for Hydrogen Storage: A Short Review

With the rapid growth in demand for effective and renewable energy, the hydrogen era has begun. To meet commercial requirements, efficient hydrogen storage techniques are required. So far, four techniques have been suggested for hydrogen storage: compressed storage, hydrogen liquefaction, chemical absorption, and physical adsorption. Currently, high-pressure compressed tanks are used in the industry; however, certain limitations such as high costs, safety concerns, undesirable amounts of occupied space, and low storage capacities are still challenges. Physical hydrogen adsorption is one of the most promising techniques; it uses porous adsorbents, which have material benefits such as low costs, high storage densities, and fast charging–discharging kinetics. During adsorption on material surfaces, hydrogen molecules weakly adsorb at the surface of adsorbents via long-range dispersion forces. The largest challenge in the hydrogen era is the development of progressive materials for efficient hydrogen storage. In designing efficient adsorbents, understanding interfacial interactions between hydrogen molecules and porous material surfaces is important. In this review, we briefly summarize a hydrogen storage technique based on US DOE classifications and examine hydrogen storage targets for feasible commercialization. We also address recent trends in the development of hydrogen storage materials. Lastly, we propose spillover mechanisms for efficient hydrogen storage using solid-state adsorbents.

The structure and electronic effects of ZIF-8 and ZIF-67 supported Pt catalysts for crotonaldehyde selective hydrogenation

The structure and electronic effects of ZIF-8 and ZIF-67 supported Pt catalysts for crotonaldehyde selective hydrogenation.

Design and Characterization of Metal Nanoparticle Infiltrated Mesoporous Metal-Organic Frameworks

The infiltration of palladium and platinum nanoparticles (NPs) into the mesoporous metal-organic framework (MOF) CYCU-3 through chemical vapor infiltration (CVI) and incipient wetness infiltration (IWI) processes was systematically explored as a means to design novel NP@MOF composite materials for potential hydrogen storage applications. We employed a traditional CVI process and a new ″green″ IWI process using methanol for precursor infiltration and reduction under mild conditions. Transmission electron microscopy-based direct imaging techniques combined with synchrotron-based powder diffraction (SPD), energy-dispersive X-ray spectroscopy, and physisorption analysis reveal that the resulting NP@MOF composites combine key NP and MOF properties. Room temperature hydrogen adsorption capacities of 0.95 and 0.20 mmol/g at 1 bar and 2.9 and 1.8 mmol/g at 100 bar are found for CVI and IWI samples, respectively. Hydrogen spillover and/or physisorption are proposed as the dominating adsorption mechanisms depending on the NP infiltration method. Mechanistic insights were obtained through the crystallographic means using SPD-based difference envelope density analysis, providing previously underexplored details on NP@MOF preparations. Consequently, important host-guest correlations influencing the global hydrogen adsorption properties are discussed, and they demonstrate that employing MOFs as platforms for NPs is an alternative approach to the development of versatile materials for improving current hydrogen storage technologies.

Rational Design and Growth of MOF-on-MOF Heterostructures

Multiporous metal-organic frameworks (MOFs) have emerged as a subclass of highly crystalline inorganic-organic materials, which are endowed with high surface areas, tunable pores, and fascinating nanostructures. Heterostructured MOF-on-MOF composites are recently becoming a research hotspot in the field of chemistry and materials science, which focus on the assembly of two or more different homogeneous or heterogeneous MOFs with various structures and morphologies. Compared with one single MOF, the dual MOF-on-MOF composites exhibit unprecedented tunability, hierarchical nanostructure, synergistic effect, and enhanced performance. Due to the difference of inorganic metals and organic ligands, the lattice parameters in a, b, and c directions in the single crystal cells could bring about subtle or large structural difference. It will result in the composite material with distinct growth methods to obtain secondary MOF grown from the initial MOF. In this review, the authors wish to mainly outline the latest synthetic strategies of heterostructured MOF-on-MOFs and their derivatives, including ordered epitaxial growth, random epitaxial growth, etc., which show the tutorial guidelines for the further development of various MOF-on-MOFs.

Fabrication of Versatile Hollow Metal-Organic Framework Nanoplatforms for Folate-Targeted and Combined Cancer Imaging and Therapy

Metal-organic frameworks (MOFs) have received extensive attention in the field of biomedicine, particularly serving as multifunctional theranostic nanoplatforms by integrating chemodrugs, imaging agents, and targeting agents. Herein, we report a facile strategy for the fabrication of a hollow and monodisperse MOF (denoted hMIL-88B(Fe)@ZIF-8) consisting of ZIF-8 nanoparticles loaded on the external shell of hollow MIL-88B(Fe). In particular, the hybrid hollow MOF was constructed by partially etching spindlelike MIL-88B(Fe) nanoparticles with 2-methylimidazole in the presence of zinc ions. The obtained hMIL-88B(Fe)@ZIF-8 was then used as a drug/cargo delivery vehicle for loading doxorubicin (DOX), manganese oxide (MnO_x) nanoparticles, and folic acid (FA), forming a multifunctional nanoplatform (denoted hM@ZMDF). Importantly, the resulting hM@ZMDF exhibited a specific targeting property for the FA receptor-overexpressed cancer cells (MCF-7 and HepG-2 cells) and then it unloaded DOX and Fe³⁺ in the tumor microenvironment. Consequently, DOX played dual roles as a chemotherapeutic drug and a fluorescent imaging agent. Also, the released Fe³⁺ could mediate the Fenton reaction and intracellularly generate toxic hydroxyl radicals in the presence of high glutathione in cancer cells. In addition, MnO_x nanoparticles could participate in magnetic resonance imaging. Therefore, the versatile hM@ZMDF nanoplatforms have great potential for smart cancer therapy.

Flow Microreactor Synthesis of Zeolitic Imidazolate Framework (ZIF)@ZIF Core-Shell Metal-Organic Framework Particles and Their Adsorption Properties

Metal-organic frameworks (MOFs) with core-shell structures enable to enhance intrinsic properties of constituent MOFs and impart additional functional activities. Although shell thickness is a key factor for regulating the properties of core-shell MOF particles, controlling it has been challenging. The widely used batch reactor synthesis cannot produce core-shell particles with uniform shell thickness because of poor reactant mixing. A microreactor could ensure excellent mixing, and that would allow to control shell thickness. In this study, we synthesized zeolitic imidazolate framework-8 (ZIF-8)@ZIF-67 and ZIF-67@ZIF-8 core-shell particles using a microreactor and investigated the effects of the mixing performance on the shell thickness of the obtained particles. Our results demonstrated that rapid mixing was critical for the uniformity of the synthesized particles. The concentration of core particles is another key factor that can preferentially induce heterogeneous nucleation on the surface of the core particles without inducing self-nucleation in the bulk solution, particularly when the self-nucleation rate of the shell MOF is high. The N₂ adsorption isotherms of the synthesized particles revealed their unique adsorption properties, which were ascribed to the core-shell structures obtained at low shell formation rates. Our simple and versatile synthesis technique not only allowed the preparation of ZIF@ZIF particles with novel functionalities but also can be extended to synthesize core-shell MOF particles with different combinations of core particles and shells.

Hard-templated metal-organic frameworks for advanced applications

Template-directing strategies for synthesising metal-organic frameworks (MOFs) have brought about new frontiers in materials chemistry due to the possibility of applying control over crystal growth, morphology and secondarily generated pores. In particular, hard templates have resulted in performance breakthroughs in catalysis, secondary ion batteries, supercapacitance, drug delivery and molecular sieving by offering facile routes for maximising the surface areas of shape-directed MOFs. In this tutorial review, a variety of hard templates employed to direct MOFs' growth into superior nano-architectures with enhanced functionalities are discussed. Hard templates discussed here include polymers, silica nanostructures, metal oxides, layered metal hydroxides, noble metals, graphene, zeolites and MOFs themselves. These templates can be divided into three broad categories: sacrificial, semi-sacrificial and non-sacrificial templates. We elaborate on the rationale behind the choice of nanomaterials as hard templates, how hard templates direct the synthesis of MOFs, how sacrificial hard templates can be removed from the final product and what the enhanced functionalities of hard-templated MOFs are. In the case of non-sacrificial hard-templates, synergistic effects arising from the coexistence of the MOF and the hard template will also be reviewed.

Peculiarities of high-pressure hydrogen adsorption on Pt catalyzed Cu-BTC metal-organic framework

Hydrogen adsorption ability is a key parameter characterizing advanced porous materials. Herein, the influence of platinum catalyst on the interaction of Cu-BTC with hydrogen is thoroughly investigated using volumetric measurements, calorimetric titration, XRD, and IR- and EPR spectroscopy. The first hydrogen adsorption by the Cu-BTC + Pt/C composite leads to an irreversible chemical reaction related to the formation of structural defects during synthesis. This process results in a partial reduction of Cu2+ to Cu0 and is accompanied by a decrease in the specific surface area and the appearance of additional mesopores. The following hydrogen adsorption-desorption cycles are completely reversible and reproducible. Besides, the Pt-containing material maintains a positive trend in excess adsorption up to ultra-high pressures in contrast with pristine Cu-BTC. Above 300-400 bars, it demonstrates a significant superiority in hydrogen capacity over the catalyst-free MOF. The possible nature of such a peculiar phenomenon is suggested.

Lattice Matching Growth of Conductive Hierarchical Porous MOF/LDH Heteronanotube Arrays for Highly Efficient Water Oxidation

The conjugation of metal-organic frameworks (MOFs) into different multicomponent materials to precisely construct aligned heterostructures is fascinating but elusive owing to the disparate interfacial energy and nucleation kinetics. Herein, a promising lattice-matching growth strategy is demonstrated for conductive MOF/layered double hydroxide (cMOF/LDH) heteronanotube arrays with highly ordered hierarchical porous structures enabling an ultraefficient oxygen evolution reaction (OER). CoNiFe-LDH nanowires are used as interior template to engineer an interface by inlaying cMOF and matching two crystal lattice systems, thus conducting a graft growth of cMOF/LDH heterostructures along the LDH nanowire. A class of hierarchical porous cMOF/LDH heteronanotube arrays is produced through continuously regulating the transformation degree. The synergistic effects of the cMOF and LDH components significantly promote the chemical and electronic structures of the heteronanotube arrays and their electroactive surface area. Optimized heteronanotube arrays exhibit extraordinary OER activity with ultralow overpotentials of 216 and 227 mV to deliver current densities of 50 and 100 mA cm^-2 with a small Tafel slope of 34.1 mV dec^-1 , ranking it among the best MOF and non-noble-metal-based catalysts for OER. The robust performance under high current density and vigorous gas bubble conditions enable such hierarchical MOF/LDH heteronanotube arrays as promising materials for practical water electrolysis.

Core-Shell MOFs@MOFs: Diverse Designability and Enhanced Selectivity

Metal-Organic frameworks (MOFs), especially MOF-based composites, performed an irreplaceable role in the material fields. By virtue of the tailorability of MOFs, core-shell MOFs@MOFs composites with diverse designability and enhanced selectivity have inspired infinite scientific interest. This review will highlight an up-to-date overview of the designability and enhanced selectivity of core-shell MOFs@MOFs composites, covering the synthetic strategies of an epitaxial growth method, postsynthetic modification, and one-pot synthesis as well as the synergistic selective performance of the synthesized MOFs@MOFs in catalysis, adsorption and separation, and molecular recognition. Finally, the potential development trend and challenges toward core-shell MOFs@MOFs are addressed.

Synthesis of ZIF-8 Nanocrystals Mediated by CO2 Gas Bubbling: Dissolution and Recrystallization

Crystal size and morphology of zeolitic imidazolate frameworks (ZIFs) can be generally controlled based on the classical theory of nucleation and growth. Herein, we have developed an alternative method to adjust the nucleation and growth kinetics of microporous ZIF-8 nanocrystals mediated by continuous CO₂ gas bubbling. In particular, CO₂ bubbling led to the dissolution of ZIF-8 slurry, while the evacuation of CO₂ bubbling resulted in the formation of new ZIF-8 nanoparticles with a considerably smaller size. A plausible mechanism of the CO₂-mediated synthesis of ZIF-8 nanoparticles was proposed based on comprehensive characterizations and analyses, which indicated that the dissolved CO₂ in methanol was able to perturb the pre-equilibrium states of crystallization intermediates and led to a comparatively fast nucleation rate due to a low number of overcoordinated species between the metal ion and the ligand. Both methanol and the base were critically important to the dissolution-recrystallization of ZIF-8, wherein the methyl carbonate linker might be reversibly produced by CO₂ insertion into the methoxide group (Zn-OCH₃). Also, the CO₂-mediated synthesis led to the small particle size, high crystallinity, good thermal stability, and high purity of ZIF-8, as compared to the conventional ZIF-8 prepared without CO₂ gas bubbling. As proof of workability, the prepared monodispersed ZIF-8 nanoparticles showed a much higher photocatalytic activity toward various organic dyes' decomposition than the conventional ZIF-8. Also, the CO₂ bubbling-mediated method could be further extended to prepare other ZIFs (e.g., ZIF-67).

Biomimetic Au/CeO2 Catalysts Decorated with Hemin or Ferrous Phthalocyanine for Improved CO Oxidation via Local Synergistic Effects

Biomimetic catalysts have drawn broad research interest owing to both high specificity and excellent catalytic activity. Herein, we report a series of biomimetic catalysts by the integration of biomolecules (hemin or ferrous phthalocyanine) onto well-defined Au/CeO₂, which leads to the high-performance CO oxidation catalysts. Strong electronic interactions among the biomolecule, Au, and CeO₂ were confirmed, and the CO uptake over hemin-Au/CeO₂ was roughly about 8 times greater than Au/CeO₂. Based on the Au/CeO₂(111) and hemin-Au/CeO₂(111) models, the density functional theory calculations reveal the mechanisms of the biomolecules-assisted catalysis process. The theoretical prediction suggests that CO and O₂ molecules preferentially bind to the surface of noncontacting Au atoms (low-coordinated sites) rather than the biomolecule sites, and the accelerating oxidation of Au-bound CO occurs via either the Langmuir-Hinshelwood mechanism or the Mars-van Krevelen mechanism. Accordingly, the findings provide useful insights into developing biomimetic catalysts with low cost and high activity.

In situ tuning of electronic structure of catalysts using controllable hydrogen spillover for enhanced selectivity

In situ tuning of the electronic structure of active sites is a long-standing challenge. Herein, we propose a strategy by controlling the hydrogen spillover distance to in situ tune the electronic structure. The strategy is demonstrated to be feasible with the assistance of CoO_x/Al₂O₃/Pt catalysts prepared by atomic layer deposition in which CoO_x and Pt nanoparticles are separated by hollow Al₂O₃ nanotubes. The strength of hydrogen spillover from Pt to CoO_x can be precisely tailored by varying the Al₂O₃ thickness. Using CoO_x/Al₂O₃ catalyzed styrene epoxidation as an example, the CoO_x/Al₂O₃/Pt with 7 nm Al₂O₃ layer exhibits greatly enhanced selectivity (from 74.3% to 94.8%) when H₂ is added. The enhanced selectivity is attributed to the introduction of controllable hydrogen spillover, resulting in the reduction of CoO_x during the reaction. Our method is also effective for the epoxidation of styrene derivatives. We anticipate this method is a general strategy for other reactions.

In situ tuning of the electronic structure of active sites is a long-standing challenge. Here, the authors report an approach to tune the electronic structure of cobalt species during the styrene epoxidation reaction by the introduction of controllable hydrogen spillover for enhanced selectivity.

Oxygen Self-Sufficient Core-Shell Metal-Organic Framework-Based Smart Nanoplatform for Enhanced Synergistic Chemotherapy and Photodynamic Therapy

The abnormal angiogenesis and insufficient oxygen supply in solid tumors lead to intratumoral hypoxia, which severely limits the efficacy of traditional photodynamic therapy (PDT). Here, a multifunctional nanoplatform (ZDZP@PP) based on a zeolitic imidazolate framework-67 (ZIF-67) core as a hydrogen peroxide catalyst, a zeolitic imidazolate framework-8 (ZIF-8) shell with a pH-responsive property, and a polydopamine-poly(ethylene glycol) (PDA-PEG) layer for improving the biocompatibility is fabricated for not only relieving tumor hypoxia but also enhancing the efficacy of combination chemo-photodynamic therapy. The chemotherapy drug doxorubicin (DOX) and photosensitizer protoporphyrin IX (PpIX) are encapsulated in different layers independently; thus, a unique two-stage stepwise release becomes possible. Moreover, the nanoplatform can effectively decompose hydrogen peroxide to produce oxygen and thus relieve tumor hypoxia, which further facilitates the production of cytotoxic reactive oxygen species (ROS) by PpIX under laser irradiation. Both in vitro and in vivo experimental results confirm that the combination chemo-photodynamic therapy with the ZDZP@PP nanoplatform can provide more effective cancer treatment than chemotherapy or PDT alone. Consequently, the oxygen self-sufficient multifunctional nanoplatform holds promising potential to overcome hypoxia and treat solid tumors in the future.