Activity enhancement of cobalt catalysts by tuning metal-support interactions

Engineering antibonding orbital occupancy of NiMoO4-supported Ru nanoparticles for enhanced chlorine evolution reaction

Chlorine evolution reaction (CER) is crucial for industrial-scale production of high-purity Cl2. Despite the development of classical dimensionally stable anodes to enhance CER efficiency, the competitive oxygen evolution reaction (OER) remains a barrier to achieving high Cl2 selectivity. Herein, a binder-free electrode, Ru nanoparticles (NPs)-decorated NiMoO4 nanorod arrays (NRAs) supported on Ti foam (Ru-NiMoO4/Ti), was designed for active CER in saturated NaCl solution (pH = 2). The Ru-NiMoO4/Ti electrode exhibits a low overpotential of 20 mV at 10 mA cm-2 current density, a high Cl2 selectivity exceeding 90%, and robust durability for 90h operation. The marked difference in Tafel slopes between CER and OER indicates the high Cl2 selectivity and superior reaction kinetics of Ru-NiMoO4/Ti electrode. Further studies reveal a strong metal-support interaction (SMSI) between Ru and NiMoO4, facilitating electron transfer through the Ru-O bridge bond and increasing the Ru 3d-Cl 2p antibonding orbital occupancy, which eventually results in weakened Ru-Cl bonding, promoted Cl desorption, and enhanced Cl2 evolution. Our findings provide new insights into developing electrodes with enhanced CER performance through antibonding orbital occupancy engineering.

A systematic DFT study of structure and electronic properties of titanium dioxide

DFT functionals are of paramount importance for an accurate electronic and structural description of transition metal systems. In this work, a systematic analysis using some well-known and commonly used DFT functionals is performed. A comparison of the structural and energetic parameters calculated with the available experimental data is made in order to find the adequate functional for an accurate description of the TiO2 bulk and surface of both anatase and rutile structures. In the absence of experimental data on the surface energy, the theoretical predictions obtained using the high-accuracy HSE06 functional were used as a reference to compare against the surface energy values calculated with the other DFT functionals. A clear improvement in the electronic description of both anatase and rutile was observed by introducing the Hubbard U correction term to PBE, PW91, and OptPBE functionals. The OptPBE-U4 functional was found to offer a good compromise between accurately describing the structural and electronic properties of titania.

Effect of Dynamic and Preferential Decoration of Pt Catalyst Surfaces by WOx on Hydrodeoxygenation Reactions

Catalysts containing Pt nanoparticles and reducible transition-metal oxides (WOx, NbOx, TiOx) exhibit remarkable selectivity to aromatic products in hydrodeoxygenation (HDO) reactions for biomass valorization, contrasting the undesired aromatic hydrogenation typically observed for metal catalysts. However, the active site(s) responsible for the high selectivity remains elusive. Here, theoretical and experimental analyses are combined to explain the observed HDO reactivity by interrogating the organization of reduced WOx domains on Pt surfaces at sub-monolayer coverage. The SurfGraph algorithm is used to develop model structures that capture the configurational space (∼1000 configurations) for density functional theory (DFT) calculations of a W3O7 trimer on stepped Pt surfaces. Machine-learning models trained on the DFT calculations identify the preferential occupation of well-coordinated Pt sites (≥8 Pt coordination number) by WOx and structural features governing WOx-Pt stability. WOx/Pt/SiO2 catalysts are synthesized with varying W loadings to test the theoretical predictions and relate them to HDO reactivity. Spectroscopy- and microscopy-based catalyst characterizations identify the dynamic and preferential decoration of well-coordinated sites on Pt nanoparticles by reduced WOx species, consistent with theoretical predictions. The catalytic consequences of this preferential decoration on the HDO of a lignin model compound, dihydroeugenol, are clarified. The effect of WOx decoration on Pt nanoparticles for HDO involves WOx inhibition of aromatic ring hydrogenation by preferentially blocking well-coordinated Pt sites. The identification of preferential decoration on specific sites of late-transition-metal surfaces by reducible metal oxides provides a new perspective for understanding and controlling metal-support interactions in heterogeneous catalysis.

Construction of a highly stable natural silicate-supported molybdenum catalyst for efficient epoxidation of olefins

Epoxides are important bulk chemicals, playing irreplaceable role in the chemical industry, but facing serious pollution and low productivity in the production process. Therefore, the development of green and efficient epoxidation of olefins by stable catalysts with low prices is of great significance. In this study, a Mo-MATP catalyst was prepared by modifying Mo(CO)₆ on attapulgite through Si-O bonding. Mo-MATP exhibits excellent performance (99% yield of cyclooctane oxide, CYCO) and stability (80% selectivity of CYCO after 17 cycles), highly tert-butyl hydroperoxide (TBHP) utilization, and extensive substrate scalability. Furthermore, the in-situ Fourier Transform Infrared Spectroscopy (FT-IR), Electron Spin-resonance Spectroscopy (ESR) and High Resolution Mass Spectrometry (HRMS) spectra suggest that TBHP would be activated by Mo-MATP to generate peroxyl radicals, which then oxidize alkenes to their corresponding epoxides. In this study, the stable loading of Mo would largely solve the problem of Mo loss during the catalytic process, thus providing a stable and dispersed Mo active center, enabling the catalyst to possess high catalytic performance and recycling stability.

Strong Interfacial Chemical Bonding in Regulating Electron Transfer and Stabilizing Catalytic Sites in a Metal-Semiconductor Schottky Junction for Enhanced Photocatalysis

The weak electronic interaction at metal-photocatalyst heterointerfaces often compromises solar-to-fuel performance. Here, a trifunctional Schottky junction, involving chemically stabilized ultrafine platinum nanoparticles (Pt NPs, ≈3 nm in diameter) on graphitic carbon nitride nanosheets (CNs) is proposed. The Pt-CN electronic interaction induces a 1.5% lattice compressive strain in Pt NPs and maintains their ultrafine size, effectively preventing their aggregation during photocatalytic reactions. Density functional theory calculations further demonstrate a significant reduction in the Schottky barrier at the chemically bonded CN-Pt heterointerface, facilitating efficient interfacial electron transfer, as supported by femtosecond transient absorption spectra (fs-TAS) measurements. The combined effects of lattice strain, stabilized Pt NPs, and efficient interfacial charge transport collaboratively enhance the photocatalytic performance, leading to over an 11-fold enhancement in visible light H2 production (8.52 mmol g-1 h-1) compared to the CN nanosheets with the in situ photo-deposited Pt NPs (0.76 mmol g-1 h-1). This study highlights the effectiveness of strong metal-semiconductor electronic interactions and underscores the potential for developing high-efficiency photocatalysts.

Control of metal-support interaction for tunable CO hydrogenation performance over Ru/TiO2 nanocatalysts

The catalytic behavior of CO hydrogenation can be modulated by metal-support interactions, while the role of the support remains elusive. Herein, we demonstrate that the presence of strong metal-support interactions (SMSI) depends strongly on the crystal phase of TiO2 (rutile or anatase) and the treatment conditions for the TiO2 support, which could critically control the activity and selectivity of Ru-based nanocatalysts for CO hydrogenation. High CO conversion and olefin selectivity were observed for Ru/rutile-TiO2 (Ru/r-TiO2), while catalysts supported by anatase (a-TiO2) showed almost no activity. Characterization confirmed that the SMSI effect could be neglected for Ru/r-TiO2, while it is dominant on Ru/a-TiO2 after reduction at 300 °C, resulting in the coverage of Ru nanoparticles by TiOx overlayers. Such SMSI could be suppressed by H2 treatment of the a-TiO2 support and the catalytic activity of the as-obtained Ru/a-TiO2(H2) can be greatly elevated from almost inactive to >50% CO conversion with >60% olefin selectivity. Further results indicated that the surface reducibility of the TiO2 support determines the SMSI state and catalytic performance of Ru/TiO2 in the CO hydrogenation reaction. This work offers an effective strategy to design efficient catalysts for the FTO reaction by regulating the crystal phase of the support.

Modulating the Electronic States of Pt Nanoparticles on Reducible Metal-Organic Frameworks for Boosting the Oxidation of Volatile Organic Compounds

The adsorption and activation of pollutant molecules and oxygen play a critical role in the oxidation reaction of volatile organic compounds (VOCs). In this study, superior adsorption and activation ability was achieved by modulating the interaction between Pt nanoparticles (NPs) and UiO-66 (U6) through the spatial position effect. Pt@U6 exhibits excellent activity in toluene, acetone, propane, and aldehyde oxidation reactions. Spectroscopic studies, 16O2/18O2 kinetic isotopic experiments, and density functional theory (DFT) results jointly reveal that the encapsulated Pt NPs of Pt@U6 possess higher electron density and d-band center, which is conducive for the adsorption and dissociation of oxygen. The toluene oxidation reaction and DFT results indicate that Pt@U6 is more favorable to activate the C-H of toluene and the C═C of maleic anhydride, while Pt/U6 with lower electron density and d-band center exhibits a higher oxygen dissociation temperature and higher reactant activation energy barriers. This study provides a deep insight into the architecture-performance relation of Pt-based catalysts for the catalytic oxidation of VOCs.

Construction of a Metal-Silica Interface for Semihydrogenation of Alkynes

Fabricating optimum surface structures represents an attractive approach for synthesizing supported catalysts with high activity and specific selectivity. New active sites could be flexibly constructed via the strong metal-support interaction under the redox condition. Herein, we demonstrated the formation of a new Rh-Si surface on a silica-modified carbon nanotube supported Rh catalyst under the high-temperature reduction condition as well as a thin amorphous silica coating layer and weak chemisorption toward the CO molecule. The electronic interactions between Rh and Si, along with the particular structure, guarantee desirable catalytic performance for the semihydrogenation of phenylacetylene under mild conditions. This facile approach might be extensively used in constructing new active sites with robust activity and specific selectivity in diverse heterogeneous catalysis systems.

Renaissance of Strong Metal-Support Interactions

Strong metal-support interactions (SMSIs) have emerged as a significant and cutting-edge area of research in heterogeneous catalysis. They play crucial roles in modifying the chemisorption properties, interfacial structure, and electronic characteristics of supported metals, thereby exerting a profound influence on the catalytic properties. This Perspective aims to provide a comprehensive summary of the latest advancements and insights into SMSIs, with a focus on state-of-the-art in situ/operando characterization techniques. This overview also identifies innovative designs and applications of new types of SMSI systems in catalytic chemistry and highlights their pivotal role in enhancing catalytic performance, selectivity, and stability in specific cases. Particularly notable is the discovery of SMSI between active metals and metal carbides, which opens up a new era in the field of SMSI. Additionally, the strong interactions between atomically dispersed metals and supports are discussed, with an emphasis on the electronic effects of the support. The chemical nature of SMSI and its underlying catalytic mechanisms are also elaborated upon. It is evident that SMSI modification has become a powerful tool for enhancing catalytic performance in various catalytic applications.

The role of high-resolution transmission electron microscopy and aberration corrected scanning transmission electron microscopy in unraveling the structure-property relationships of Pt-based fuel cells electrocatalysts

Platinum-based fuel cell electrocatalysts are structured on a nano level in order to extend their active surface area and maximize the utilization of precious and scarce platinum. Their performance is dictated by the atomic arrangement of their surface layers atoms via structure-property relationships. Transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) are the preferred methods for characterizing these catalysts, due to their capacity to achieve local atomic-level resolutions. Size, morphology, strain and local composition are just some of the properties of Pt-based nanostructures that can be obtained by (S)TEM. Furthermore, advanced methods of (S)TEM are able to provide insights into the quasi-in situ, in situ or even operando stability of these nanostructures. In this review, we present state-of-the-art applications of (S)TEM in the investigation and interpretation of structure-activity and structure-stability relationships.

Regioselective Ring-Opening of Terminal Epoxides Catalyzed by a Porous Metal Silicate Material

Reductive ring-opening of epoxides is a green pathway for synthesizing highly value-added alcohols. In this study, we present a practically applicable approach for the synthesis of anti-Markovnikov-type alcohols with high yields from aliphatic and aromatic epoxides under mild conditions by developing porous metal silicate (PMS) catalysts. A PMS material PMS-20 consists of cobalt and nickel bimetal redox-active sites, exhibiting exceptional catalytic activity and selectivity in the reductive ring-opening of terminal epoxides with >99% yield of primary alcohols. Comparing with the existing methods using noble metals, PMS-20 exhibits broad substrate scope and excellent functional group tolerance by synergistic work between cobalt and nickel species, which is clarified by dual chamber cell system characterization and theoretical calculation results.

Synthesis of core@shell catalysts guided by Tammann temperature

Designing high-performance thermal catalysts with stable catalytic sites is an important challenge. Conventional wisdom holds that strong metal-support interactions can benefit the catalyst performance, but there is a knowledge gap in generalizing this effect across different metals. Here, we have successfully developed a generalizable strong metal-support interaction strategy guided by Tammann temperatures of materials, enabling functional oxide encapsulation of transition metal nanocatalysts. As an illustrative example, Co@BaAl2O4 core@shell is synthesized and tracked in real-time through in-situ microscopy and spectroscopy, revealing an unconventional strong metal-support interaction encapsulation mechanism. Notably, Co@BaAl2O4 exhibits exceptional activity relative to previously reported core@shell catalysts, displaying excellent long-term stability during high-temperature chemical reactions and overcoming the durability and reusability limitations of conventional supported catalysts. This pioneering design and widely applicable approach has been validated to guide the encapsulation of various transition metal nanoparticles for environmental tolerance functionalities, offering great potential to advance energy, catalysis, and environmental fields.

Enhancing Electrocatalytic Performance via Thickness-Tuned Hollow N-Doped Mesoporous Carbon with Embedded Co Nanoparticles for Oxygen Reduction Reaction

Improving catalytic performance relies heavily on the rational design of the spatial structure of electrocatalysts, achieved through exposure of active sites, acceleration of the charge/mass transfer rate, and confinement of the reactants. In this study, we have fabricated Co nanoparticles embedded in overhang eave-like hollow N-doped mesoporous carbon (Co@EMPC) by adjusting the thickness of mesoporous polydopamine (mPDA). Thanks to the abundance of short mesoporous channels within the porous structure and the tuned electronic properties resulting from heterojunction structures between metal and carbon, the prepared Co@EMPC provides increased accessibility to active sites and enhanced mass and charge transfer rates. These features contribute to superior performance in the oxygen reduction reaction (ORR), with a half-wave potential of 0.874 V vs RHE, as well as exceptional durability in alkaline media. This study introduces a useful approach to enhance the ORR using eave-like hollow nanoreactors.

Direct Evidence of Dynamic Metal Support Interactions in Co/TiO2 Catalysts by Near-Ambient Pressure X-ray Photoelectron Spectroscopy

The interaction between metal particles and the oxide support, the so-called metal-support interaction, plays a critical role in the performance of heterogenous catalysts. Probing the dynamic evolution of these interactions under reactive gas atmospheres is crucial to comprehending the structure-performance relationship and eventually designing new catalysts with enhanced properties. Cobalt supported on TiO2 (Co/TiO2) is an industrially relevant catalyst applied in Fischer-Tropsch synthesis. Although it is widely acknowledged that Co/TiO2 is restructured during the reaction process, little is known about the impact of the specific gas phase environment at the material's surface. The combination of soft and hard X-ray photoemission spectroscopies are used to investigate in situ Co particles supported on pure and NaBH4-modified TiO2 under H2, O2, and CO2:H2 gas atmospheres. The combination of soft and hard X-ray photoemission methods, which allows for simultaneous probing of the chemical composition of surface and subsurface layers, is one of the study's unique features. It is shown that under H2, cobalt particles are encapsulated below a stoichiometric TiO2 layer. This arrangement is preserved under CO2 hydrogenation conditions (i.e., CO2:H2), but changes rapidly upon exposure to O2. The pretreatment of the TiO2 support with NaBH4 affects the surface mobility and prevents TiO2 spillover onto Co particles.

A strong bimetal-support interaction in ethanol steam reforming

The metal-support interaction (MSI) in heterogeneous catalysts plays a crucial role in reforming reaction to produce renewable hydrogen, but conventional objects are limited to single metal and support. Herein, we report a type of RhNi/TiO₂ catalysts with tunable RhNi-TiO₂ strong bimetal-support interaction (SBMSI) derived from structure topological transformation of RhNiTi-layered double hydroxides (RhNiTi-LDHs) precursors. The resulting 0.5RhNi/TiO₂ catalyst (with 0.5 wt.% Rh) exhibits extraordinary catalytic performance toward ethanol steam reforming (ESR) reaction with a H₂ yield of 61.7%, a H₂ production rate of 12.2 L h^-1 g_cat^-1 and a high operational stability (300 h), which is preponderant to the state-of-the-art catalysts. By virtue of synergistic catalysis of multifunctional interface structure (Rh-Ni^δ--O_v-Ti³⁺; O_v denotes oxygen vacancy), the generation of formate intermediate (the rate-determining step in ESR reaction) from steam reforming of CO and CH_x is significantly promoted on 0.5RhNi/TiO₂ catalyst, accounting for its ultra-high H₂ production.

Facet-Controlled Cu2O Support Enhances Catalytic Activity of Pt Nanoparticles for CO Oxidation

The metal-support interaction plays a crucial role in determining the catalytic activity of supported metal catalysts. Changing the facet of the support is a promising strategy for catalytic control via constructing a well-defined metal-support nanostructure. Herein, we developed cubic and octahedral Cu₂O supports with (100) and (111) facets terminated, respectively, and Pt nanoparticles (NPs) were introduced. The in situ characterizations revealed the facet-dependent encapsulation of the Pt NPs by a CuO layer due to the oxidation of the Cu₂O support during the CO oxidation reaction. The CuO layer on Pt at cubic Cu₂O (Pt/c-Cu₂O) significantly enhanced catalytic performance, while the thicker CuO layer on Pt at octahedral Cu₂O suppressed CO conversion. The formation of a thin CuO layer is attributed to the dominant Pt-O-Cu bond at the Pt/c-Cu₂O interface, which suppresses the adsorption of oxygen molecules. This investigation provides insight into designing high-performance catalysts via engineering the interface interaction.

Rapid Joule Heating Synthesis of Oxide-Socketed High-Entropy Alloy Nanoparticles as CO2 Conversion Catalysts

The unorthodox surface chemistry of high-entropy alloy nanoparticles (HEA-NPs), with numerous interelemental synergies, helps catalyze a variety of essential chemical processes, such as the conversion of CO₂ to CO, as a sustainable path to environmental remediation. However, the risk of agglomeration and phase separation in HEA-NPs during high-temperature operations are lasting issues that impede their practical viability. Herein, we present HEA-NP catalysts that are tightly sunk in an oxide overlayer for promoting the catalytic conversion of CO₂ with exceptional stability and performance. We demonstrated the controlled formation of conformal oxide overlayers on carbon nanofiber surfaces via a simple sol-gel method, which facilitated a large uptake of metal precursor ions and helped to decrease the reaction temperature required for nanoparticle formation. During the rapid thermal shock synthesis process, the oxide overlayer would also impede nanoparticle growth, resulting in uniformly distributed small HEA-NPs (2.37 ± 0.78 nm). Moreover, these HEA-NPs were firmly socketed in the reducible oxide overlayer, enabling an ultrastable catalytic performance involving >50% CO₂ conversion with >97% selectivity to CO for >300 h without extensive agglomeration. Altogether, we establish the rational design principles for the thermal shock synthesis of high-entropy alloy nanoparticles and offer a helpful mechanistic perspective on how the oxide overlayer impacts the nanoparticle synthesis behavior, providing a general platform for the designed synthesis of ultrastable and high-performance catalysts that could be utilized for various industrially and environmentally relevant chemical processes.

Restructuring of titanium oxide overlayers over nickel nanoparticles during catalysis

Reducible supports can affect the performance of metal catalysts by the formation of suboxide overlayers upon reduction, a process referred to as the strong metal-support interaction (SMSI). A combination of operando electron microscopy and vibrational spectroscopy revealed that thin TiO_x overlayers formed on nickel/titanium dioxide catalysts during 400°C reduction were completely removed under carbon dioxide hydrogenation conditions. Conversely, after 600°C reduction, exposure to carbon dioxide hydrogenation reaction conditions led to only partial reexposure of nickel, forming interfacial sites in contact with TiO_x and favoring carbon-carbon coupling by providing a carbon species reservoir. Our findings challenge the conventional understanding of SMSIs and call for more-detailed operando investigations of nanocatalysts at the single-particle level to revisit static models of structure-activity relationships.

Ruthenium-cobalt single atom alloy for CO photo-hydrogenation to liquid fuels at ambient pressures

Photothermal Fischer-Tropsch synthesis represents a promising strategy for converting carbon monoxide into value-added chemicals. High pressures (2-5 MPa) are typically required for efficient C-C coupling reactions and the production of C₅₊ liquid fuels. Herein, we report a ruthenium-cobalt single atom alloy (Ru₁Co-SAA) catalyst derived from a layered-double-hydroxide nanosheet precursor. Under UV-Vis irradiation (1.80 W cm^-2), Ru₁Co-SAA heats to 200 °C and photo-hydrogenates CO to C₅₊ liquid fuels at ambient pressures (0.1-0.5 MPa). Single atom Ru sites dramatically enhance the dissociative adsorption of CO, whilst promoting C-C coupling reactions and suppressing over-hydrogenation of CH_x* intermediates, resulting in a CO photo-hydrogenation turnover frequency of 0.114 s^-1 with 75.8% C₅₊ selectivity. Owing to the local Ru-Co coordination, highly unsaturated intermediates are generated during C-C coupling reactions, thereby improving the probability of carbon chain growth into C₅₊ liquid fuels. The findings open new vistas towards C₅₊ liquid fuels under sunlight at mild pressures.

Bimetallic Sites for Catalysis: From Binuclear Metal Sites to Bimetallic Nanoclusters and Nanoparticles

Heterogeneous bimetallic catalysts have broad applications in industrial processes, but achieving a fundamental understanding on the nature of the active sites in bimetallic catalysts at the atomic and molecular level is very challenging due to the structural complexity of the bimetallic catalysts. Comparing the structural features and the catalytic performances of different bimetallic entities will favor the formation of a unified understanding of the structure-reactivity relationships in heterogeneous bimetallic catalysts and thereby facilitate the upgrading of the current bimetallic catalysts. In this review, we will discuss the geometric and electronic structures of three representative types of bimetallic catalysts (bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles) and then summarize the synthesis methodologies and characterization techniques for different bimetallic entities, with emphasis on the recent progress made in the past decade. The catalytic applications of supported bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles for a series of important reactions are discussed. Finally, we will discuss the future research directions of catalysis based on supported bimetallic catalysts and, more generally, the prospective developments of heterogeneous catalysis in both fundamental research and practical applications.

Synergistic Mechanism of Sub-Nanometric Ru Clusters Anchored on Tungsten Oxide Nanowires for High-Efficient Bifunctional Hydrogen Electrocatalysis

The construction of strong interactions and synergistic effects between small metal clusters and supports offers a great opportunity to achieve high-performance and cost-effective heterogeneous catalysis, however, studies on its applications in electrocatalysis are still insufficient. Herein, it is reported that W₁₈ O₄₉ nanowires supported sub-nanometric Ru clusters (denoted as Ru SNC/W₁₈ O₄₉ NWs) constitute an efficient bifunctional electrocatalyst for hydrogen evolution/oxidation reactions (HER and HOR) under acidic condition. Microstructural analyses, X-ray absorption spectroscopy, and density functional theory (DFT) calculations reveal that the Ru SNCs with an average RuRu coordination number of 4.9 are anchored to the W₁₈ O₄₉ NWs via RuOW bonds at the interface. The strong metal-support interaction leads to the electron-deficient state of Ru SNCs, which enables a modulated RuH strength. Furthermore, the unique proton transport capability of the W₁₈ O₄₉ also provides a potential migration channel for the reaction intermediates. These components collectively enable the remarkable performance of Ru SNC/W₁₈ O₄₉ NWs for hydrogen electrocatalysis with 2.5 times of exchange current density than that of carbon-supported Ru nanoparticles, and even rival the state-of-the-art Pt catalyst. This work provides a new prospect for the development of supported sub-nanometric metal clusters for efficient electrocatalysis.

Direct observation of accelerating hydrogen spillover via surface-lattice-confinement effect

Uncovering how hydrogen transfers and what factors control hydrogen conductivity on solid surface is essential for enhancing catalytic performance of H-involving reactions, which is however hampered due to the structural complexity of powder catalysts, in particular, for oxide catalysts. Here, we construct stripe-like MnO(001) and grid-like Mn₃O₄(001) monolayers on Pt(111) substrate and investigate hydrogen spillover atop. Atomic-scale visualization demonstrates that hydrogen species from Pt diffuse unidirectionally along the stripes on MnO(001), whereas it exhibits an isotropic pathway on Mn₃O₄(001). Dynamic surface imaging in H₂ atmosphere reveals that hydrogen diffuses 4 times more rapidly on MnO than the case on Mn₃O₄, which is promoted by one-dimension surface-lattice-confinement effect. Theoretical calculations indicate that a uniform and medium O-O distance favors hydrogen diffusion while low-coordinate surface O atom inhibits it. Our work illustrates the surface-lattice-confinement effect of oxide catalysts on hydrogen spillover and provides a promising route to improve the hydrogen spillover efficiency.

Engineering Heterogeneous Catalysis with Strong Metal-Support Interactions: Characterization, Theory and Manipulation

Strong metal-support interactions (SMSI) represent a classic yet fast-growing area in catalysis research. The SMSI phenomenon results in the encapsulation and stabilization of metal nanoparticles (NPs) with the support material that significantly impacts the catalytic performance through regulation of the interfacial interactions. Engineering SMSI provides a promising approach to steer catalytic performance in various chemical processes, which serves as an effective tool to tackle energy and environmental challenges. Our Minireview covers characterization, theory, catalytic activity, dependence on the catalytic structure and inducing environment of SMSI phenomena. By providing an overview and outlook on the cutting-edge techniques in this multidisciplinary research field, we not only want to provide insights into the further exploitation of SMSI in catalysis, but we also hope to inspire rational designs and characterization in the broad field of material science and physical chemistry.

Solvent Effects in the Preparation of Catalysts Using Activated Carbon as a Carrier

The role of solvents is crucial in catalyst preparation. With regard to catalysts prepared with activated carbon (AC) as the carrier, when water is used as a solvent it is difficult for the solution to infiltrate the AC. Because AC comprises a large number of C atoms and is a nonpolar material, it is more effective for the adsorption of nonpolar substances. Since the water and active ingredients are polar, they cannot easily infiltrate AC. In this study, the dispersion of the active component was significantly improved by optimizing the solvent, and the particle size of the active component was reduced from 33.08 nm to 15.30 nm. The specific surface area of the catalyst is significantly increased, by 10%, reaching 991.49 m²/g. Under the same reaction conditions, the conversion of acetic acid by the catalyst prepared with the mixed solvent was maintained at approximately 65%, which was 22% higher than that obtained using the catalyst prepared with water as the solvent.

Boosted Heterogeneous Catalysis by Surface-Accumulated Excess Electrons of Non-Oxidized Bare Copper Nanoparticles on Electride Support

Engineering active sites of metal nanoparticle-based heterogeneous catalysts is one of the most prerequisite approaches for the efficient production of chemicals, but the limited active sites and undesired oxidation on the metal nanoparticles still remain as key challenges. Here, it is reported that the negatively charged surface of copper nanoparticles on the 2D [Ca₂ N]⁺ ∙e^- electride provides the unrestricted active sites for catalytic selective sulfenylation of indoles and azaindoles with diaryl disulfides. Substantial electron transfer from the electride support to copper nanoparticles via electronic metal-support interactions results in the accumulation of excess electrons at the surface of copper nanoparticles. Moreover, the surface-accumulated excess electrons prohibit the oxidation of copper nanoparticle, thereby maintaining the metallic surface in a negatively charged state and activating both (aza)indoles and disulfides under mild conditions in the absence of any further additives. This study defines the role of excess electrons on the nanoparticle-based heterogeneous catalyst that can be rationalized in versatile systems.

Hydrogen spillover effects in the Fischer–Tropsch reaction over carbon nanotube supported cobalt catalysts

Support (CNTs) surface defect-induced hydrogen spillover significantly impacted the catalytic activity (turnover frequency, TOF) and methane selectivity evolution in cobalt-based Fischer–Tropsch synthesis.

Co3O4/TiO2 catalysts studied in situ during the preferential oxidation of carbon monoxide: the effect of different TiO2 polymorphs

This study reveals the influence of different TiO2 supports on the catalytic performance and phase transformations of Co3O4 during CO-PrOx.

Boosting CO hydrogenation towards C2+ hydrocarbons over interfacial TiO2−x/Ni catalysts

Considerable attention has been drawn to tune the geometric and electronic structure of interfacial catalysts via modulating strong metal-support interactions (SMSI). Herein, we report the construction of a series of TiO2−x/Ni catalysts, where disordered TiO2−x overlayers immobilized onto the surface of Ni nanoparticles (~20 nm) are successfully engineered with SMSI effect. The optimal TiO2−x/Ni catalyst shows a CO conversion of ~19.8% in Fischer–Tropsch synthesis (FTS) process under atmospheric pressure at 220 °C. More importantly, ~64.6% of the product is C2+ paraffins, which is in sharp contrast to the result of the conventional Ni catalyst with the main product being methane. A combination study of advanced electron microscopy, multiple in-situ spectroscopic characterizations, and density functional theory calculations indicates the presence of Niδ−/TiO2−x interfacial sites, which could bind carbon atom strongly, inhibit methane formation and facilitate the C-C chain propagation, lead to the production of C2+ hydrocarbon on Ni surface.

In situ Cu single atoms anchoring on MOF-derived porous TiO2 for the efficient separation of photon-generated carriers and photocatalytic H2 evolution

Single atom catalysts (SACs) have an extremely high atom utilization and distinctive structures and properties in the field of photocatalysis. However, the premise of conducting scientific research and applications is still the stability and catalytic activity of single atoms on suitable substrates. Metal organic frameworks (MOFs), as one of the most suitable single-atom substrates, have tunable internal structures, unsaturated coordination bonds, and high specific surface areas. In this work, Ti-based MOF, MIL-125, was adopted as the precursor to prepare mesoporous Cu-loaded TiO₂. During the synthesis of MIL-125, a Cu source was added, and Cu atoms were fixed by partly replacing Ti atoms in the Ti-O octahedron to coordinate with O atoms, resulting in a good dispersity, good stability and high loading amount. Experimental investigations demonstrated that dispersed Cu single atoms act as reaction centres, besides being able to accelerate the transfer of photoelectrons. Under simulated sunlight, the H₂ evolution rate of the optimum Cu-TiO₂ sample reaches 17.77 mmol g^-1 h^-1, nearly 101 times higher than that of the pure mesoporous TiO₂. The apparent quantum efficiency (AQE) is 20.15% under 365 nm irradiation. This research opens a new thinking to preparing high stability and high activity single atom photocatalysts.

Measuring and directing charge transfer in heterogenous catalysts

Precise control of charge transfer between catalyst nanoparticles and supports presents a unique opportunity to enhance the stability, activity, and selectivity of heterogeneous catalysts. While charge transfer is tunable using the atomic structure and chemistry of the catalyst-support interface, direct experimental evidence is missing for three-dimensional catalyst nanoparticles, primarily due to the lack of a high-resolution method that can probe and correlate both the charge distribution and atomic structure of catalyst/support interfaces in these structures. We demonstrate a robust scanning transmission electron microscopy (STEM) method that simultaneously visualizes the atomic-scale structure and sub-nanometer-scale charge distribution in heterogeneous catalysts using a model Au-catalyst/SrTiO₃-support system. Using this method, we further reveal the atomic-scale mechanisms responsible for the highly active perimeter sites and demonstrate that the charge transfer behavior can be readily controlled using post-synthesis treatments. This methodology provides a blueprint for better understanding the role of charge transfer in catalyst stability and performance and facilitates the future development of highly active advanced catalysts.

Overturned Loading of Inert CeO2 to Active Co3 O4 for Unusually Improved Catalytic Activity in Fenton-Like Reactions

In the past decades, numerous efforts have been devoted to improving the catalytic activity of nanocomposites by either exposing more active sites or regulating the interaction between the support and nanoparticles while keeping the structure of the active sites unchanged. Here, we report the fabrication of a Co₃ O₄ -CeO₂ nanocomposite via overturning the loading direction, i.e., loading an inert CeO₂ support onto active Co₃ O₄ nanoparticles. The resultant catalyst exhibits unexpectedly higher activity and stability in peroxymonosulfate-based Fenton-like reactions than its analog prepared by the traditional impregnation method. Abundant oxygen vacancies (O_v with a Co⋅⋅⋅O_v ⋅⋅⋅Ce structure instead of Co⋅⋅⋅O_v ) are generated as new active sites to facilitate the cleavage of the peroxide bond to produce SO₄ ^.- and accelerate the rate-limiting step, i.e., the desorption of SO₄ ^.- , affording improved activity. This strategy is a new direction for boosting the catalytic activity of nanocomposite catalysts in various scenarios, including environmental remediation and energy applications.

Tunable metal-support interaction of Pt/CeO2 catalyst via surfactant-assisted strategy: Insight into the total oxidation of CO and toluene

Catalytic oxidation is promising in removing atmospheric pollutants to address serious environmental concerns. Supported Pt-based catalysts (e.g., Pt/CeO₂) are most effective for catalytic removal of atmospheric pollutants. However, the catalytic performance is largely affected by the oxidation state of Pt, oxygen vacancy and metal-support interaction (MSI). Herein, two different types of Pt/CeO₂ catalyst were fabricated via surfactant-assisted strategy and treated in different annealing atmospheres, which was applied to carbon monoxide (CO) and toluene (C₇H₈) oxidation, respectively. The results reveal that the as-synthesized Pt/CeO₂-NH catalyst is favorable to C₇H₈ oxidation, whereas the contrast Pt/CeO₂-AH is favorable to CO oxidation. Meanwhile, Pt/CeO₂-NH catalyst also has high thermal stability facing high temperature (e.g., 400 °C). Various characterizations, such as in-situ Raman, XPS, CO-DRIFTS and XANES, clarifies that the Pt/CeO₂-NH catalyst has a higher surface Pt⁰ proportion, a weak MSI and more oxygen vacancies. The corresponding theoretical calculation also supports the experimental results. These results advance efficient regulation and fundamental understanding of MSI, and the design of heterogeneous catalysts.

Impacts of Metal–Support Interaction on Hydrogen Evolution Reaction of Cobalt-Nitride-Carbide Catalyst

Cobalt-nitride-carbide (Co-N-C) catalysts are promising cost-efficient transition metal catalysts for electrocatalytic hydrogen evolution, but few works investigate the metal–support interaction (MSI) effect on hydrogen evolution reaction (HER) performance. Herein, efficient Co-N-C_X catalysts with controllable MSI between encapsulated Co nanoparticles and nitrogen-doped graphitic carbon nanosheets were synthesized via a facile organic–inorganic hybridization method. Results demonstrate that the Co-N-C_0.025M catalyst with the coexistence of single-atom Co sites and Co nanoparticles prepared by 0.025 M cobalt nitrate shows excellent HER performance, achieving a low overpotential of 145 mV to reach 10 mA cm⁻² in 0.5 M sulfuric acid, which is mainly because the optimal MSI, which leads to a moderate hydrogen adsorption energy and improved electroactive sites, not only facilitates the charge transfer to improve the HER kinetics, but also improves the durability of the catalyst by Co-N bond anchoring and encapsulation of active Co species. This work provides guidance to further reveal the influence of MSI on their catalytic activity.

Interfacial compatibility critically controls Ru/TiO2 metal-support interaction modes in CO2 hydrogenation

Supports can widely affect or even dominate the catalytic activity, selectivity, and stability of metal nanoparticles through various metal-support interactions (MSIs). However, underlying principles have not been fully understood yet, because MSIs are influenced by the composition, size, and facet of both metals and supports. Using Ru/TiO₂ supported on rutile and anatase as model catalysts, we demonstrate that metal-support interfacial compatibility can critically control MSI modes and catalytic performances in CO₂ hydrogenation. Annealing Ru/rutile-TiO₂ in air can enhance CO₂ conversion to methane resulting from enhanced interfacial coupling driven by matched lattices of RuO_x with rutile-TiO₂; annealing Ru/anatase-TiO₂ in air decreases CO₂ conversion and converts the product into CO owing to strong metal-support interaction (SMSI). Although rutile and anatase share the same chemical composition, we show that interfacial compatibility can basically modify metal-support coupling strength, catalyst morphology, surface atomic configuration, MSI mode, and catalytic performances of Ru/TiO₂ in heterogeneous catalysis.

Supports can largely affect the catalytic performance of metal nanoparticles, but the underlying principles are not yet fully understood. Here the authors demonstrate that metal-support interfacial compatibility of Ru/TiO₂ can critically control the metal-support interaction modes and the catalytic performances in CO₂ hydrogenation.

The concept of active site in heterogeneous catalysis

Catalysis is at the core of chemistry and has been essential to make all the goods surrounding us, including fuels, coatings, plastics and other functional materials. In the near future, catalysis will also be an essential tool in making the shift from a fossil-fuel-based to a more renewable and circular society. To make this reality, we have to better understand the fundamental concept of the active site in catalysis. Here, we discuss the physical meaning - and deduce the validity and, therefore, usefulness - of some common approaches in heterogeneous catalysis, such as linking catalyst activity to a 'turnover frequency' and explaining catalytic performance in terms of 'structure sensitivity' or 'structure insensitivity'. Catalytic concepts from the fields of enzymatic and homogeneous catalysis are compared, ultimately realizing that the struggle that one encounters in defining the active site in most solid catalysts is likely the one we must overcome to reach our end goal: tailoring the precise functioning of the active sites with respect to many different parameters to satisfy our ever-growing needs. This article ends with an outlook of what may become feasible within the not-too-distant future with modern experimental and theoretical tools at hand.