Molecular weight fractionation by confinement of polymer in one-dimensional pillar[5]arene channels

Bispillar[5]arene-Based Slide-Ring Polyrotaxanation Enables Enhanced Toughness, Recyclability, Impact, and Puncture Resistance of Polyisoprene Elastomers

A series of slide-ring polyrotaxanes (SRPs) have been constructed by the solvent-free blending of a ditopic pillar[5]arene (DP5A) and polyisoprene (PIP) after thermal annealing. Solid-state 13C NMR experiments supported the fact that the pillar[5]arene rings of DP5A were threaded by PIP chains to afford physically interlocked networks. Tensile tests revealed that 1% of DP5A can improve the elongation at break from 50 to 239%, the tensile modulus from 2.1 to 3.9 MPa, and the toughness from 0.35 to 4.5 MJ/m3. Impact and puncture resistance experiments show that the DP5A-doped materials exhibit remarkable enhancement of protective and impalement-resistant performance. The samples can be also recycled repeatedly due to their physical crosslinking nature. The important stress delocalization effects have been attributed to the pulley effect of DP5A in the SRP materials, which represents a supramolecular approach for improving the performance of PIP elastomers.

Pillar[5]arenes decorated with six-membered-ring aromatics at all the substitution positions

Macrocyclic molecules have characteristic properties different from linear ones, such as high symmetry and guest-inclusion ability. To bring drastic changes to these properties, direct introduction of many substituents is a challenging but effective tool. Herein, we attain direct installation of ten six-membered-ring aromatic π-units into both rims of a pillar[5]arene. In contrast to previous pillar[n]arenes with less hindered five-membered-ring units, which showed conformational complexity and crushed crystal structures, the per-phenyl-substituted pillar[5]arene has a cylinder-shaped crystal structure with a dichloromethane inside the cavity and is obtained as a single pair of D 5-symmetric enantiomers. The average dihedral angles between the core and peripheral benzene rings sharply increase from 38° to 66°. These differences indicate the importance of local steric repulsion on both rims for determining the structures and properties of macrocycles.

Controlled Sublimation Rate of Guest Drug from Polymorphic Forms of a Cyclodextrin-Based Polypseudorotaxane Complex and Its Correlation with Molecular Dynamics as Probed by Solid-State NMR

Encapsulation of active pharmaceutical ingredients (APIs) in confined spaces has been extensively explored as it dramatically alters the molecular dynamics and physical properties of the API. Herein, we explored the effect of encapsulation on the molecular dynamics and physical stability of a guest drug, salicylic acid (SA), confined in the intermolecular spaces of γ-cyclodextrin (γ-CD) and poly(ethylene glycol) (PEG)-based polypseudorotaxane (PPRX) structure. The sublimation tendency of SA encapsulated in three polymorphic forms of the γ-CD/PEG-based PPRX complex, monoclinic columnar (MC), hexagonal columnar (HC), and tetragonal columnar (TC), was investigated. The SA sublimation rate was decreased by 3.0-6.6-fold and varied in the order of MC form > HC form > TC form complex. The 13C and 1H magic-angle spinning (MAS) solid-state nuclear magnetic resonance (NMR) spectra and 13C spin-lattice relaxation time (T1) indicated that the encapsulated SA molecules existed as the monomeric form, and its molecular mobility increased in the order of MC form > HC form > TC form complex. In the complexes, a rapid chemical exchange between two dynamic states of SA (free and bound) was suggested, with varying adsorption/desorption rates accounting for its distinct molecular mobility. This adsorption/desorption process was influenced by proton exchange at the interaction site and interaction strength of SA in the complexes, as evidenced by 1H MAS spectra and temperature dependency of the 13C carbonyl chemical shift. A positive correlation between the molecular mobility of SA and its sublimation rate was established. Moreover, the molecular mobility of γ-CD and PEG in the complexes coincided with that of SA, which can be explained by fast guest-driven dynamics. This is the first report on the stability improvement of an API through complexation in polymorphic supramolecular host structures. The relationship between the molecular dynamics and physical properties of encapsulated API will aid in the rational design of drug delivery systems.

Diastereoselective Rotaxane Synthesis with Pillar[5]arenes via Co-crystallization and Solid-State Mechanochemical Processes

Chiral rotaxanes have attracted much attention in recent decades for their unique chirality based on their interlocked structures. Thus, selective synthesis methods of chiral rotaxanes have been developed. The introduction of substituents with chiral centers to produce diastereomers is a powerful strategy for the construction of chiral rotaxanes. However, in case of a small energy difference between the diastereomers, diastereoselective synthesis is extremely difficult. Herein, we report a new diastereoselective rotaxane synthesis method using solid-phase diastereoselective [3]pseudorotaxane formation and mechanochemical solid-phase end-capping reactions of the [3]pseudorotaxanes. By co-crystallization of stereodynamic planar chiral pillar[5]arene with stereogenic carbons at both rims and axles with suitable end groups and lengths, the [3]pseudorotaxane with a high diastereomeric excess (ca. 92% de) was generated in the solid state because of higher effective molarity with aid by packing effects and significant energy differences between [3]pseudorotaxane diastereomers. In contrast, the de of the pillar[5]arene was low in solution (ca. 10% de) because of a small energy difference between diastereomers. Subsequent end-capping reactions of the polycrystalline [3]pseudorotaxane with high de in solvent-free conditions successfully yielded rotaxanes while maintaining the high de generated by the co-crystallization.

The coming of age of water channels for separation membranes: from biological to biomimetic to synthetic

Water channels are one of the key pillars driving the development of next-generation desalination and water treatment membranes. Over the past two decades, the rise of nanotechnology has brought together an abundance of multifunctional nanochannels that are poised to reinvent separation membranes with performances exceeding those of state-of-the-art polymeric membranes within the water-energy nexus. Today, these water nanochannels can be broadly categorized into biological, biomimetic and synthetic, owing to their different natures, physicochemical properties and methods for membrane nanoarchitectonics. Furthermore, against the backdrop of different separation mechanisms, different types of nanochannel exhibit unique merits and limitations, which determine their usability and suitability for different membrane designs. Herein, this review outlines the progress of a comprehensive amount of nanochannels, which include aquaporins, pillar[5]arenes, I-quartets, different types of nanotubes and their porins, graphene-based materials, metal- and covalent-organic frameworks, porous organic cages, MoS₂, and MXenes, offering a comparative glimpse into where their potential lies. First, we map out the background by looking into the evolution of nanochannels over the years, before discussing their latest developments by focusing on the key physicochemical and intrinsic transport properties of these channels from the chemistry standpoint. Next, we put into perspective the fabrication methods that can nanoarchitecture water channels into high-performance nanochannel-enabled membranes, focusing especially on the distinct differences of each type of nanochannel and how they can be leveraged to unlock the as-promised high water transport potential in current mainstream membrane designs. Lastly, we critically evaluate recent findings to provide a holistic qualitative assessment of the nanochannels with respect to the attributes that are most strongly valued in membrane engineering, before discussing upcoming challenges to share our perspectives with researchers for pathing future directions in this coming of age of water channels.

Noncovalently bound and mechanically interlocked systems using pillar[n]arenes

Pillar[n]arenes are pillar-shaped macrocyclic compounds owing to the methylene bridges linking the para-positions of the units. Owing to their unique pillar-shaped structures, these compounds exhibit various excellent properties compared with other cyclic host molecules, such as versatile functionality using various organic synthesis techniques, substituent-dependent solubility, cavity-size-dependent host-guest properties in organic media, and unit rotation along with planar chiral inversion. These advantages have enabled the high-yield synthesis and rational design of pillar[n]arene-based mechanically interlocked molecules (MIMs). In particular, new types of pillar[n]arene-based MIMs that can dynamically convert between interlocked and unlocked states through unit rotation have been produced. The highly symmetrical pillar-shaped structures of pillar[n]arenes result in simple NMR spectra, which are useful for studying the motion of pillar[n]arene wheels in MIMs and creating sophisticated MIMs with higher-order structures. The creation and application of polymeric MIMs based on pillar[n]arenes is also discussed.

State- and water repellency-controllable molecular glass of pillar[5]arenes with fluoroalkyl groups by guest vapors

Molecular glasses are low-molecular-weight organic compounds that are stable in the amorphous state at room temperature. Herein, we report a state- and water repellency-controllable molecular glass by n-alkane guest vapors. We observed that a macrocyclic host compound pillar[5]arene with the C₂F₅ fluoroalkyl groups changes from the crystalline to the amorphous state (molecular glass) by heating above its melting point and then cooling to room temperature. The pillar[5]arene molecular glass shows reversible transitions between amorphous and crystalline states by uptake and release of the n-alkane guest vapors, respectively. Furthermore, the n-alkane guest vapor-induced reversible changes in the water contact angle were also observed: water contact angles increased and then reverted back to the original state by the uptake and release of the n-alkane guest vapors, respectively, along with the changes in the chemical structure and roughness on the surface of the molecular glass. The water repellency of the molecular glass could be controlled by tuning the uptake ratio of the n-alkane guest vapor.

Pillar[5]arenes with C₂F₅ substituents showed reversible amorphous–crystal transitions by uptake and release of n-alkane vapors. The amorphous–crystal transitions triggered macroscopic property change such as water repellency.

Pillar[5]arene-derived covalent organic materials with pre-encoded molecular recognition for targeted and synergistic cancer photo- and chemotherapy

An efficient targeted and synergistic cancer photo- and chemotherapy platform was constructed from aldehyde-modified pillar[5]arene and tetra-(4-aminophenyl)porphyrin successfully.

Pillar[5]arene-Based Fluorescent Sensor Array for Biosensing of Intracellular Multi-neurotransmitters through Host-Guest Recognitions

Neurotransmitters are very important for neuron events and brain diseases. However, effective probes for analyzing specific neurotransmitters are currently lacking. Herein, we design and create a supramolecular fluorescent probe (CN-DFP5) by synthesizing a dual-functionalized fluorescent pillar[5]arene derivative with borate naphthalene and aldehyde coumarin recognition groups to identify large-scale neurotransmitters. The developed probe can detect seven model neurotransmitters by generating different fluorescence patterns through three types of host-guest interactions. The obtained signals are statistically processed by principal component analysis, thus the high-throughput analysis of neurotransmitters is realized under dual-channel fluorescence responses. The present probe combines the advantages of small-molecule-based probes to easily enter into living neurons and cross-reactive sensor arrays. Thus, the selective binding enables this probe to identify specific neurotransmitters in biofluids, living neurons, and tissues. High selectivity and sensitivity further demonstrate that the molecular device could extend to more applications to detect and image neurotransmitters.

Enhanced Desalination Polyamide Membranes Incorporating Pillar[5]arene through in-Situ Aggregation-Interfacial Polymerization-isAGRIP

Membrane-based desalination have an important role in water purification. Inspired by highly performant biological proteins, artificial water channels (AWC) have been proposed as active components to overcome the permeability/selectivity trade-off of desalination processes. Promising performances have been reported with Pillararene crystalline phases revealing impressive molecular-scale separation performances, when used as selective porous materials. Herein, we demonstrate that Pillar[5]arene PA[5] aggregates are in-situ generated and incorporated during the interfacial polymerization, within industrially relevant reverse osmosis polyamide-PA membranes. In particular, we explore the best combination between PA[5] aggregates and m-phenylenediamine (MPD) and trimesoylchloride (TMC) monomers to achieve their seamless incorporation in a defect-free hybrid polyamide PA[5]-PA membranes for enhanced desalination. The performances of the reference and hybrid membranes are evaluated by cross-flow filtration under real reverse osmosis conditions (15.5 bar of applied pressure) by filtration of brackish feed streams. The optimized membranes achieve a ∼40 % improvement, in water permeance of ∼2.76±0.5 L m^-2  h^-1  bar^-1 and high 99.5 % NaCl rejection with respect to the reference TFC membrane and a similar water permeance compared to one of the best commercial BW30 membranes (3.0 L m^-2  h^-1  bar^-1 and 99.5 % NaCl rejection).

Polypseudorotaxanes constructed from pillar[5]arenes and polyamides by interfacial polymerization

Polypseudorotaxanes constructed from pillar[5]arene rings and polyamide chains were successfully synthesized by interfacial polymerization between diamines and dicarbonyl chlorides in the presence of pillar[5]arene. The dicarbonyl chloride length and the assocation constants of dicarbonyl chloride-pillar[5]arene complexes were important factors in producing polypseudorotaxanes with high cover ratio of pillar[5]arene rings.

A pillar[5]arene-based covalent organic framework with pre-encoded selective host-guest recognition

It is highly desirable to maintain both permanent accessible pores and selective molecular recognition capability of macrocyclic cavitands in the solid state. Integration of well-defined discrete macrocyclic hosts into ordered porous polymeric frameworks (e.g., covalent organic frameworks, COFs) represents a promising strategy to transform many supramolecular chemistry concepts and principles well established in the solution phase into the solid state, which can enable a broad range of practical applications, such as high-efficiency molecular separation, heterogeneous catalysis, and pollution remediation. However, it is still a challenging task to construct macrocycle-embedded COFs. In this work, a novel pillar[5]arene-derived (P5) hetero-porous COF, denoted as P5-COF, was rationally designed and synthesized. Featuring the unique backbone structure, P5-COF exhibited selective adsorption of C2H2 over C2H4 and C2H6, as well as significantly enhanced host-guest binding interaction with paraquat, in comparison with the pillar[5]arene-free COF analog, Model-COF. The present work established a new strategy for developing COFs with customizable molecular recognition/separation properties through the bottom-up "pre-porous macrocycle to porous framework" design.

Promoting the Spreading of Droplets on a Superhydrophobic Surface by Supramolecular Amphiphilic Complex-Based Host-Guest Chemistry

The spreading of pesticide droplets on the surface of superhydrophobic plants is an important process, which can prevent the inadequate retention such as bouncing, splashing, and drifting, thereby improving the efficiency of pesticide utilization and reducing soil and groundwater pollution. Herein, we report an approach to fabricate a supramolecular amphiphilic system that significantly contributes to this issue. The hydrophilic amino-pillar[5]arene was synthesized, which could form vesicles with the hydrophobic long-chain guest. This host-guest complex decreased the surface tension, which greatly promotes the spreading of droplets. This study provides a new strategy for prolonging pesticide retention and reducing pesticide loss.

Supramolecular exfoliation of layer silicate clay by novel cationic pillar[5]arene intercalants

Clays are multi-layered inorganic materials that can be used to prepare nanocomposite fillers. Because the multi-layered structure is thermodynamically stable, it is difficult to change a multi-layered material into single layers to improve its dispersity. Previously, clays were modified with dodecylammonium cations to promote complexation with nylon 6, nylon 66, polypropylene, polyethylene, polystyrene, and polycaprolactone to increase the mechanical strength (and/or thermal stability) of the composite material; however, complete exfoliation could not be achieved in these composites. In this study, pillar[5]arenes are synthesized and functionalized with ten cationic substituents as novel intercalants for modifying bentonite clay, which is a multi-layered metal-cation-containing silicate. The pillar[5]arenes exfoliate the clay by forming polyrotaxanes with poly(ethylene glycol) through host–guest interactions.

Thermally Responsive Poly(ethylene oxide)-Based Polyrotaxanes Bearing Hydrogen-Bonding Pillar[5]arene Rings*

Poly(ethylene oxide)s (PEOs) are useful polymers with good water solubility, biological compatibility, and commercial availability. PEOs with various end groups were threaded into pillar[5]arene rings in a mixture of water and methanol to afford pseudopolyrotaxanes. Corresponding polyrotaxanes were also constructed by capping COOH-terminated pseudopolyrotaxanes with bulky amines, in which multiple hydrogen bonds involving the pillar[5]arene OH groups were critically important to prevent dethreading. The number of threaded ring components could be rationally controlled in these materials, providing a simple and versatile method to tune the mechanical and thermal properties. Specifically, a polyrotaxane with a high-molecular-weight axle became elastic upon heating above the melting point of PEOs and exhibited temperature-dependent shape memory property because of the topological confinement and crosslinked hydrogen bonds.

A Stretchable Pillararene-Containing Supramolecular Polymeric Material with Self-Healing Property

Constructing polymeric materials with stretchable and self-healing properties arise increasing interest in the field of tissue engineering, wearable electronics and soft actuators. Herein, a new type of supramolecular cross-linker was constructed through host-guest interaction between pillar[5]arene functionalized acrylate and pyridinium functionalized acrylate, which could form supramolecular polymeric material via photo-polymerization of n-butyl acrylate (BA). Such material exhibited excellent tensile properties, with maximum tensile strength of 3.4 MPa and strain of 3000%, respectively. Moreover, this material can effectively dissipate energy with the energy absorption efficiency of 93%, which could be applied in the field of energy absorbing materials. In addition, the material showed self-healing property after cut and responded to competitive guest.

A supramolecular complex of hydrazide-pillar[5]arene and bisdemethoxycurcumin with potential anti-cancer activity

Pillar[5]arene complexes of the naturally occurring compound bisdemethoxycurcumin (BDMC) were acquired for improving the water solubility and stability of BDMC. As a family member of curcuminoid compounds, BDMC has many interesting therapeutic properties. However, its low aqueous solubility and stability resulted in poor availability and restricted the clinical efficacy. Pillar[5]arenes with hydrophilic ends and a hydrophobic cavity could include with BDMC based on size matching. The synthesized hydrazide-pillar[5]arene (HP5A) and BDMC had a strong host-guest interaction with a 1:1 binding stoichiometry. Furthermore, the HP5A ⊃ BDMC complex could self-assemble into well-defined fibers in water/ethanol solution. This supramolecular complex worked well in vitro for inhibiting the proliferation of hepatoma carcinoma cells HepG2. Remarkably, this method of complexation with pillar[5]arenes visibly reduced the undesirable side effects on normal cells without weakening the anti-cancer activity of the drugs. We expected that the obtained host-guest complex and fibrous assembly would provide a promising platform for delivering drugs with low water solubility.

Synthesis of functionalized copillar[4+1]arenes and rotaxane as heteromultivalent scaffolds

In this study, novel copillar[4+1]arenes were used as central heteromultivalent scaffolds via orthogonal couplings with a series of biologically relevant molecules such as carbohydrates, α-amino acids, biotin and phenylboronic acid. Further modifications by introducing maleimides or cyclooctyne groups provided molecular probes adapted to copper-free click chemistry. An octa-azidated fluorescent rotaxane bearing two distinct ligands was also generated in a fully controlled manner.

Pillar[5]arene-based ion-pair recognition for constructing a [2]pseudorotaxane with supramolecular interaction induced LCST behavior

Here, we report a novel [2]pseudorotaxane based on perbromoethylated pillar[5]arene/imidazolium iodide ionic liquid ion-pair recognition and this pseudorotaxane shows supramolecular interaction induced LCST behavior in solution.