Strong vibrational coupling in room temperature plasmonic resonators

Dynamical control of nanoscale light-matter interactions in low-dimensional quantum materials

Tip-enhanced nano-spectroscopy and -imaging have significantly advanced our understanding of low-dimensional quantum materials and their interactions with light, providing a rich insight into the underlying physics at their natural length scale. Recently, various functionalities of the plasmonic tip expand the capabilities of the nanoscopy, enabling dynamic manipulation of light-matter interactions at the nanoscale. In this review, we focus on a new paradigm of the nanoscopy, shifting from the conventional role of imaging and spectroscopy to the dynamical control approach of the tip-induced light-matter interactions. We present three different approaches of tip-induced control of light-matter interactions, such as cavity-gap control, pressure control, and near-field polarization control. Specifically, we discuss the nanoscale modifications of radiative emissions for various emitters from weak to strong coupling regime, achieved by the precise engineering of the cavity-gap. Furthermore, we introduce recent works on light-matter interactions controlled by tip-pressure and near-field polarization, especially tunability of the bandgap, crystal structure, photoluminescence quantum yield, exciton density, and energy transfer in a wide range of quantum materials. We envision that this comprehensive review not only contributes to a deeper understanding of the physics of nanoscale light-matter interactions but also offers a valuable resource to nanophotonics, plasmonics, and materials science for future technological advancements.

Ultrafast Nanoimaging of Spin-Mediated Shear Waves in an Acoustic Cavity

Strong spin-lattice coupling in van der Waals (vdW) magnets shows potential for innovative magneto-mechanical applications. Here, nanoscale and picosecond imaging by ultrafast electron microscopy reveal heterogeneous spin-mediated coherent acoustic phonon dynamics in a thin-film cavity of the vdW antiferromagnet FePS3. The harmonics of the interlayer shear acoustic modes are observed, in which the even and odd harmonics exhibit distinct nanoscopic dynamics. Corroborated by acoustic wave simulation, the role of defects in forming even harmonics is elucidated. Above the Néel temperature (TN), the interlayer shear acoustic harmonics are suppressed, while the in-plane traveling wave is predominantly excited. The dominant acoustic dynamics shifts from the out-of-plane shear to the in-plane traveling wave across TN, demonstrating that magnetic properties can influence phonon scattering pathways. The spatiotemporally resolved structural characterization provides valuable nanoscopic insights for interlayer-shear-mode-based acoustic cavities, opening up possibilities for magneto-mechanical applications of vdW magnets.

Vibrational Anharmonicity and Energy Relaxation in Nanoscale Acoustic Resonators

The fundamental and n = 3 overtones of Au nanoplate thickness vibrations have been studied by transient absorption microscopy. The frequencies of the n = 3 overtone are less than 3× the frequency of the fundamental. This anharmonicity is explained through a continuum mechanics model that includes organic layers on top of the nanoplate and between the nanoplate and the glass substrate. In this model, anharmonicity arises from coupling between the vibrations of the nanoplate and the organic layers, which creates avoided crossings that reduce the overtone frequencies compared to the fundamental. Comparison of the experimental and calculated quality factors shows that coupling occurs to the top organic layer. Good agreement between the measured and calculated quality factors is obtained by introducing internal damping for the nanoplate. These results show that engineering layers of soft material around metal nanostructures can be used to control the vibrational lifetimes.

Transport and Interfacial Injection of d-Band Hot Holes Control Plasmonic Chemistry

Harnessing nonequilibrium hot carriers from plasmonic metal nanostructures constitutes a vibrant research field with the potential to control photochemical reactions, particularly for solar fuel generation. However, a comprehensive understanding of the interplay of plasmonic hot-carrier-driven processes in metal/semiconducting heterostructures has remained elusive. In this work, we reveal the complex interdependence among plasmon excitation, hot-carrier generation, transport, and interfacial collection in plasmonic photocatalytic devices, uniquely determining the charge injection efficiency at the solid/liquid interface. Measuring the internal quantum efficiency of ultrathin (14-33 nm) single-crystalline plasmonic gold (Au) nanoantenna arrays on titanium dioxide substrates, we find that the performance of the device is limited by hot hole collection at the metal/electrolyte interface. Our solid- and liquid-state experimental approach, combined with ab initio simulations, demonstrates more efficient collection of high-energy d-band holes traveling in the [111] orientation, enhancing oxidation reactions on {111} surfaces. These findings establish new guidelines for optimizing plasmonic photocatalytic systems and optoelectronic devices.

Compressible viscoelasticity of cell membranes determined by gigahertz-frequency acoustic vibrations

Membrane viscosity is an important property of cell biology, which determines cellular function, development and disease progression. Various experimental and computational methods have been developed to investigate the mechanics of cells. However, there have been no experimental measurements of the membrane viscosity at high-frequencies in live cells. High frequency measurements are important because they can probe viscoelastic effects. Here, we investigate the membrane viscosity at gigahertz-frequencies through the damping of the acoustic vibrations of gold nanoplates. The experiments are modeled using a continuum mechanics theory which reveals that the membranes display viscoelasticity, with an estimated relaxation time of ca. 5.7 + 2.4 / - 2.7 ps. We further demonstrate that membrane viscoelasticity can be used to differentiate a cancerous cell line (the human glioblastoma cells LN-18) from a normal cell line (the mouse brain microvascular endothelial cells bEnd.3). The viscosity of cancerous cells LN-18 is lower than that of healthy cells bEnd.3 by a factor of three. The results indicate promising applications of characterizing membrane viscoelasticity at gigahertz-frequency in cell diagnosis.

Mode specific dynamics for the acoustic vibrations of a gold nanoplate

The vibrational modes of semiconductor and metal nanostructures occur in the MHz to GHz frequency range, depending on dimensions. These modes are at the heart of nano-optomechanical devices, and understanding how they dissipate energy is important for applications of the devices. In this paper ultrafast transient absorption microscopy has been used to examine the breathing modes of a single gold nanoplate, where up to four overtones were observed. Analysis of the frequencies and amplitudes of the modes using a simple continuum mechanics model shows that the system behaves as a free plate, even though it is deposited onto a surface with no special preparation. The overtones decay faster than the fundamental mode, which is not predicted by continuum mechanics calculations of mode damping due to radiation of sound waves. Possible reasons for this effect include frequency dependent thermoelastic effects in the nanoplate, and/or flow of acoustic energy out of the excitation region.

Plate-Like Colloidal Metal Nanoparticles

The pseudo-two-dimensional (2D) morphology of plate-like metal nanoparticles makes them one of the most anisotropic, mechanistically understood, and tunable structures available. Although well-known for their superior plasmonic properties, recent progress in the 2D growth of various other materials has led to an increasingly diverse family of plate-like metal nanoparticles, giving rise to numerous appealing properties and applications. In this review, we summarize recent progress on the solution-phase growth of colloidal plate-like metal nanoparticles, including plasmonic and other metals, with an emphasis on mechanistic insights for different synthetic strategies, the crystallographic habits of different metals, and the use of nanoplates as scaffolds for the synthesis of other derivative structures. We additionally highlight representative self-assembly techniques and provide a brief overview on the attractive properties and unique versatility benefiting from the 2D morphology. Finally, we share our opinions on the existing challenges and future perspectives for plate-like metal nanomaterials.

Gigahertz optoacoustic vibration in Sub-5 nm tip-supported nano-optomechanical metasurface

The gigahertz acoustic vibration of nano-optomechanical systems plays an indispensable role in all-optical manipulation of light, quantum control of mechanical modes, on-chip data processing, and optomechanical sensing. However, the high optical, thermal, and mechanical energy losses severely limit the development of nano-optomechanical metasurfaces. Here, we demonstrated a high-quality 5 GHz optoacoustic vibration and ultrafast optomechanical all-optical manipulation in a sub-5 nm tip-supported nano-optomechanical metasurface (TSNOMS). The physical rationale is that the design of the semi-suspended metasurface supported by nanotips of <5 nm enhances the optical energy input into the metasurface and closes the mechanical and thermal output loss channels, result in dramatically improvement of the optomechanical conversion efficiency and oscillation quality of the metasurface. The design strategy of a multichannel-loss-mitigating semi-suspended metasurface can be generalized to performance improvements of on-chip processed nano-optomechanical systems. Applications include all-optical operation of nanomechanical systems, reconfigurable nanophotonic devices, optomechanical sensing, and nonlinear and self-adaptive photonic functionalities.

Simultaneous capturing phonon and electron dynamics in MXenes

Plasmonic MXenes are of particular interest, because of their unique electron and phonon structures and multiple surface plasmon effects, which are different from traditional plasmonic materials. However, to date, how electronic energy damp to lattice vibrations (phonons) in MXenes has not been unraveled. Here, we employed ultrafast broadband impulsive vibrational spectroscopy to identify the energy damping channels in MXenes (Ti3C2Tx and Mo2CTx). Distinctive from the well-known damping pathways, our results demonstrate a different energy damping channel, in which the Ti3C2Tx plasmonic electron energy transfers to coherent phonons by nonthermal electron mediation after Landau damping, without involving electron-electron scattering. Moreover, electrons are observed to strongly couple with A1g mode (~60 fs, 85-100%) and weakly couple with Eg mode (1-2 ps, 0-15%). Our results provide new insight into the electron-phonon interaction in MXenes, which allows the design of materials enabling efficient manipulation of electron transport and energy conversion.

Low-Frequency Oscillations in Optical Measurements of Metal-Nanoparticle Vibrations

Time-resolved optical measurements of vibrating metal nanoparticles have been used extensively to probe the ultrafast mechanical properties of the nanoparticles and of the surrounding liquid, but nearly all investigations so far have been limited to the linear regime. Here, we report the observation of a low-frequency oscillating signal in transient-absorption measurements of nanoparticles with octahedral gold cores and cubic silver shells; the signal appears at the difference of two mechanical vibrational frequencies in the particles, suggesting a nonlinear mixing process. We tentatively attribute this proposed mixing to a nonlinear coupling between a vibrational mode of the nanoparticle and its optical-frequency plasmon resonance. The optimization of this nonlinear transduction may enable high-efficiency opto-mechanical frequency mixing in the GHz-THz frequency regime.

Semi-empirical Quantum Optics for Mid-Infrared Molecular Nanophotonics

Nanoscale infrared (IR) resonators with sub-diffraction limited mode volumes and open geome- tries have emerged as new platforms for implementing cavity QED at room temperature. The use of infrared (IR) nano-antennas and tip nanoprobes to study strong light-matter coupling of molecular vibrations with the vacuum field can be exploited for IR quantum control with nanometer and femtosecond resolution. To accelerate the development of molecule-based quantum nano-photonic devices in the mid-IR, we propose a generally applicable semi-empirical methodology based on quantum optics to describe light-matter interaction in systems driven by femtosecond laser pulses. The theory is shown to reproduce recent experiments on the acceleration of the vibrational relaxation rate in infrared nanostructures, and also provide phys- ical insights for the implementation of coherent phase rotations of the near-field using broadband nanotips. We then apply the quantum framework to develop general tip-design rules for the exper- imental manipulation of vibrational strong coupling and Fano interference effects in open infrared resonators. We finally propose the possibility of transferring the natural anharmonicity of molecular vibrational levels to the resonator near-field in the weak coupling regime to implement intensity-dependent phase shifts of the coupled system response with strong pulses, and develop a vibrational chirping model to understand the effect. The semi-empirical quantum theory is equivalent to first- principles techniques based on Maxwell's equations, but its lower computational cost suggests its use a rapid design tool for the development of strongly-coupled infrared nanophotonic hardware for applications ranging from quantum control of materials to quantum information processing.

Polymer dependent acoustic mode coupling and Hooke's law spring constants in stacked gold nanoplates

Metal nanoparticles are excellent acoustic resonators and their vibrational spectroscopy has been widely investigated. However, the coupling between vibrational modes of different nanoparticles is less explored. For example, how the intervening medium affects the coupling strength is not known. Here, we investigate how different polymers affect coupling in Au nanoplate-polymer-Au nanoplate sandwich structures. The coupling between the breathing modes of the Au nanoplates was measured using single-particle pump-probe spectroscopy, and the polymer dependent coupling strength was determined experimentally. Analysis of the acoustic mode coupling gives the effective spring constant for the polymers. A relative motion mode was also observed for the stacked Au nanoplates. The frequency of this mode is strongly correlated with the coupling constant for the breathing modes. The breathing mode coupling and relative motion mode were analyzed using a coupled oscillator model. This model shows that both these effects can be described using the same spring constant for the polymer. Finally, we present a new type of mass balance using the strongly coupled resonators. We show that the resonators have a mass detection limit of a few femtograms. We envision that further understanding of the vibrational coupling in acoustic resonators will improve the coupling strength and expand their potential applications.

Acoustic cavities in 2D heterostructures

Two-dimensional (2D) materials offer unique opportunities in engineering the ultrafast spatiotemporal response of composite nanomechanical structures. In this work, we report on high frequency, high quality factor (Q) 2D acoustic cavities operating in the 50-600 GHz frequency (f) range with f × Q up to 1 × 1014. Monolayer steps and material interfaces expand cavity functionality, as demonstrated by building adjacent cavities that are isolated or strongly-coupled, as well as a frequency comb generator in MoS2/h-BN systems. Energy dissipation measurements in 2D cavities are compared with attenuation derived from phonon-phonon scattering rates calculated using a fully microscopic ab initio approach. Phonon lifetime calculations extended to low frequencies (<1 THz) and combined with sound propagation analysis in ultrathin plates provide a framework for designing acoustic cavities that approach their fundamental performance limit. These results provide a pathway for developing platforms employing phonon-based signal processing and for exploring the quantum nature of phonons.

Nanoparticle-Fluid Interactions at Ultrahigh Acoustic Vibration Frequencies Studied by Femtosecond Time-Resolved Microscopy

Liquid viscous and viscoelastic properties are very important parameters in determining rheological phenomena. Mechanical resonators with extremely high vibrational frequencies interacting with simple liquids present a wide range of applications from mass sensing to biomechanics. However, a lack of understanding of fluid viscoelasticity greatly hinders the utilization of mechanical resonators. In this paper, the high frequency acoustic vibrations of Au nanoplates with large quality factors were used to probe fluid properties (water, glycerol, and their mixtures) through time-resolved pump-probe microscopy experiments. For water, viscous damping was clearly observed, where an inviscid effect was only detected previously. Adding glycerol to the water increases the fluid viscosity and leads to a bulk viscoelastic response in the system. The experimental results are in excellent agreement with a continuum mechanics model for the damping of nanoplate breathing modes in liquids, confirming the experimental observation of viscoelastic effects. In addition to the breathing modes of the nanoplates, Brillouin oscillations are observed in the experiments. Analysis of the frequency of the Brillouin oscillations also shows the presence of viscoelastic effects in the high-viscosity solvents. The detection and analysis of viscous damping in liquids is important not only for understanding the energy dissipation mechanisms and providing the mechanical relaxation times of the liquids but also for developing applications of nanomechanical resonators for fluid environments.

Mass loading effects in the acoustic vibrations of gold nanoplates

The breathing modes of single suspended gold nanoplates have been examined by transient absorption microscopy. These vibrational modes show very high quality factors which means that their frequencies can be accurately measured. Measurements performed before and after removing the organic layer that coats the as synthesized nanoplates show significant increases in frequency, which are consistent with removal of a few nm of organic material from the nanoplate surface. Experiments were also performed after depositing polymer beads on the sample. These measurements show a decrease in frequency in the region of the beads. This implies that adding a localized mass to the nanoplate hybridizes the vibrational normal modes, creating a new breathing mode which has a maximum amplitude at the bead. The nanoplate resonators have a mass sensing detection limit of ca. 10 attograms, which is comparable to the best results that have been achieved with plasmonic nanoparticles.

Signatures of Small Morphological Anisotropies in the Plasmonic and Vibrational Responses of Individual Nano-objects

The plasmonic and vibrational properties of single gold nanodisks patterned on a sapphire substrate are investigated via spatial modulation and pump-probe optical spectroscopies. The features of the measured extinction spectra and time-resolved signals are highly sensitive to minute deviations of the nanodisk morphology from a perfectly cylindrical one. An elliptical nanodisk section, as compared to a circular one, lifts the degeneracy of the two nanodisk in-plane dipolar surface plasmon resonances, which can be selectively excited by controlling the polarization of the incident light. This splitting effect, whose amplitude increases with nanodisk ellipticity, correlates with the detection of additional vibrational modes in the context of time-resolved spectroscopy. Analysis of the measurements is performed through the combination of optical and acoustic numerical models. This allows us first to estimate the dimensions of the investigated nanodisks from their plasmonic response and then to compare the measured and computed frequencies of their detectable vibrational modes, which are found to be in excellent agreement. This study demonstrates that single-particle optical spectroscopies are able to provide access to fine morphological characteristics, representing in this case a valuable alternative to traditional techniques aimed at postfabrication inspection of subwavelength nanodevice morphology.

Making waves: Radiation damping in metallic nanostructures

Metal nanostructures display several types of resonances. In the visible and near-IR spectral regions, there are localized surface plasmon resonances (LSPRs) that involve the coherent oscillation of the conduction electrons. Extended metal nanostructures, such as nanowires or nanoplates, also exhibit propagating surface plasmon polaritons (PSPPs), which are motions of the electrons at the surface of the structure that have a well-defined momentum. In addition, the vibrational normal modes of metal nanostructures give rise to low frequency resonances in the gigahertz to terahertz range. These different types of motions/resonances suffer energy losses from internal effects and from interactions with the environment. The goal of this perspective is to describe the part of the energy relaxation process due to the environment. Even though the plasmon resonances and acoustic vibrational modes arise from very different physics, it turns out that environmental damping is dominated by radiation of waves. The way the rates for radiation damping depend on the size of the nanostructure and the properties of the environment will be discussed for the different processes. For example, it is well known that for LSPRs, the rate of radiation damping increases with particle size. However, the radiation damping rate decreases with increasing dimensions for PSPPs and for the acoustic vibrational modes.