Quantitative earthquake-like statistical properties of the flow of soft materials below yield stress

Large-Scale Engineerable Films Tailored with Cellulose Nanofibrils for Lighting Management and Thermal Insulation

Fibrillated cellulose-based nanocomposites can improve energy efficiency of building envelopes, especially windows, but efficiently engineering them with a flexible ability of lighting and thermal management remains highly challenging. Herein, a scalable interfacial engineering strategy is developed to fabricate haze-tunable thermal barrier films tailored with phosphorylated cellulose nanofibrils (PCNFs). Clear films with an extremely low haze of 1.6% (glass-scale) are obtained by heat-assisted surface void packing without hydrophobization of nanocellulose. PCNF gel cakes serve here as templates for surface roughening, thereby resulting in a high haze (73.8%), and the roughened films can block heat transfer by increasing solar reflection in addition to a reduced thermal conduction. Additionally, obtained films can tune distribution of light from visible to near-infrared spectral range, enabling uniform colored lighting and inhibiting localized heating. Furthermore, an integrated simulation of lighting and cooling energy consumption in the case of office buildings shows that the film can reduce the total energy use by 19.2-38.1% under reduced lighting levels. Such a scalable and versatile engineering strategy provides an opportunity to endow nanocellulose-reinforced materials with tunable optical and thermal functionalities, moving their practical applications in green buildings forward.

2D graphene-based advanced nanoarchitectonics for electrochemical biosensors: Applications in cancer biomarker detection

Low-cost, rapid, and easy-to-use biosensors for various cancer biomarkers are of utmost importance in detecting cancer biomarkers for early-stage metastasis control and efficient diagnosis. The molecular complexity of cancer biomarkers is overwhelming, thus, the repeatability and reproducibility of measurements by biosensors are critical factors. Electrochemical biosensors are attractive alternatives in cancer diagnosis due to their low cost, simple operation, and promising analytical figures of merit. Recently graphene-derived nanostructures have been used extensively for the fabrication of electrochemical biosensors because of their unique physicochemical properties, including the high electrical conductivity, adsorption capacity, low cost and ease of mass production, presence of oxygen-containing functional groups that facilitate the bioreceptor immobilization, increased flexibility and mechanical strength, low cellular toxicity. Indeed, these properties make them advantageous compared to other alternatives. However, some drawbacks must be overcome to extend their use, such as poor and uncontrollable deposition on the substrate due to the low dispersity of some graphene materials and irreproducibility of the results because of the differences in various batches of the produced graphene materials. This review has documented the most recently developed strategies for electrochemical sensor fabrication. It differs in the categorization method compared to published works to draw greater attention to the wide opportunities of graphene nanomaterials for biological applications. Limitations and future scopes are discussed to advance the integration of novel technologies such as artificial intelligence, the internet of medical things, and triboelectric nanogenerators to eventually increase efficacy and efficiency.

Confining Bismuth-Halide Perovskite in Mesochannels of Silica Nanomembranes for Exceptional Photocatalytic Abatement of Air Pollutants

Spatially confined photocatalysis has emerged as a viable strategy for the intensification of various redox reactions, but the influence of confined structure on reaction behavior is always overlooked in gas-solid reactions. Herein, we report a nanomembrane with confining Cs3 Bi2 Br9 nanocrystals inside vertical channels of porous insulated silica thin sheets (CBB@SBA(⊥)) for photocatalytic nitric oxide (NO) abatement. The ordered one-dimensional (1D) pore channels with mere 70 nm channel length provide a highly accessible confined space for catalytic reactions. A record-breaking NO conversion efficiency of 98.2 % under a weight hourly space velocity (WHSV) of 3.0×106  mL g-1  h-1 , as well as exceptionally high stability over 14 h and durability over a wide humidity range (RH=15-90 %) was realized over SBA(⊥) confined Cs3 Bi2 Br9 , well beyond its nonconfined analogue and the Cs3 Bi2 Br9 confine in Santa Barbara Amorphous (SBA-15). Mechanism studies suggested that the insulated pore channels of SBA(⊥) in CBB@SBA(⊥) endow concentrated electron field and enhanced mass transfer that render high exposure of reactive species and lower reaction barrier needs for ⋅O2 - formation and NO oxidation, as well as prevents structural degradation of Cs3 Bi2 Br9 . This work expands an innovative strategy for designing efficient photocatalysts for air pollution remediation.

Enhanced stability of CsPbBr3 nanocrystals through Al2O3 and polymer coating

Lead halide perovskite nanocrystals have emerged as a promising candidate for next-generation display applications due to their attractive optical properties and low-cost production. However, the environmental stability of perovskite remains a major challenge, hindering their practical applications and scalability for commercialization. In this study, we present an effective method to enhance the stability of CsPbBr3 nanocrystals by coating them with a combination of Al2O3 and a polymer. The unique double protection structure significantly improves their resistance to moisture, heat, and polar solvents. It is worth noting that compared with the ordinary CsPbBr3 nanocrystals, the modified nanocrystals have better stability and higher luminous intensity. After soaking in water for 360 hours, the modified nanocrystals retained 85% of their initial luminous intensity. Under optimal conditions, the luminous intensity of modified nanocrystals increased by 36%. Furthermore, the thermal stability and organic solvent resistance of the nanocrystals are improved compared with the nanocrystals uncoated with Al2O3. The synthesized white light emitting diode using the modified PNCs achieves a color gamut coverage rate of 129% under standard NTSC, and 95% under standard Rec.2020, indicating its potential for future display applications. This research presents a promising approach for the development of stable perovskite nanocrystals with enhanced performance in various optoelectronic devices.

Extending Ring-Chain Coupling Empirical Law to Lithium-Mediated Electrochemical Ammonia Synthesis

With its efficient nitrogen fixation kinetics, electrochemical lithium-mediated nitrogen reduction reaction (LMNRR) holds promise for replacing Haber-Bosch process and realizing sustainable and green ammonia production. However, the general interface problem in lithium electrochemistry seriously impedes the further enhancement of LMNRR performance. Inspired by the development history of lithium battery electrolytes, here, we extend the ring-chain solvents coupling law to LMNRR system to rationally optimize the interface during the reaction process, achieving nearly a two-fold Faradaic efficiency up to 54.78±1.60 %. Systematic theoretical simulations and experimental analysis jointly decipher that the anion-rich Li+ solvation structure derived from ring tetrahydrofuran coupling with chain ether successfully suppresses the excessive passivation of electrolyte decomposition at the reaction interface, thus promoting the mass transfer of active species and enhancing the nitrogen fixation kinetics. This work offers a progressive insight into the electrolyte design of LMNRR system.

Smartphone-based hand-held polarized light microscope for on-site pharmaceutical crystallinity characterization

Polarized light microscopy (PLM) is a common but critical method for pharmaceutical crystallinity characterization, which has been widely introduced for research purposes or drug testing and is recommended by many pharmacopeias around the world. To date, crystallinity characterization of pharmaceutical solids is restricted to laboratories due to the relatively bulky design of the conventional PLM system, while little attention has been paid to on-site, portable, and low-cost applications. Herein, we developed a smartphone-based polarized microscope with an ultra-miniaturization design ("hand-held" scale) for these purposes. The compact system consists of an optical lens, two polarizers, and a tailor-made platform to hold the smartphone. Analytical performance parameters including resolution, imaging quality of interference color, and imaging reproducibility were measured. In a first approach, we illustrated the suitability of the device for pharmaceutical crystallinity characterization and obtained high-quality birefringence images comparable to a conventional PLM system, and we also showed the great promise of the device for on-site characterization with high flexibility. In a second approach, we employed the device as a proof of concept for a wider application ranging from liquid crystal to environmental pollutants or tissues from plants. As such, this smartphone-based hand-held polarized light microscope shows great potential in helping pharmacists both for research purposes and on-site drug testing, not to mention its broad application prospects in many other fields.

Construction of Diverse N-Heterocycles by Formal (3 + 3) Cycloaddition of Naphthol/Thionaphthol/Naphthylamine and 1,3,5-Triazinanes

Here, we report a facile and metal-free method for the construction of dihydrooxazine derivatives via a formal (3 + 3) annulation reaction of naphthols and 1,3,5-triazinanes. The 1,3,5-triazinanes were utilized as a formal three-atom synthon (C-N-C) for cycloaddition. In addition, dihydrothiazine and tetrahydrobenzoquinazoline derivatives could also be produced in good yields by this strategy under catalyst-free and additive-free conditions.

A review of medical wearables: materials, power sources, sensors, and manufacturing aspects of human wearable technologies

Wearable technology is a promising and revolutionary technology that is changing some aspects of our standard of living to a great extent, including health monitoring, sport and fitness, performance tracking, education, and entertainment. This article presents a comprehensive literature review of over 160 articles related to state-of-the-art human wearable technologies. We provide a thorough understanding of the materials, power sources, sensors, and manufacturing processes, and the relationships between these to capture opportunities for enhancement and challenges to overcome in wearables. As a result of our review, we have determined the need for the development of a comprehensive, robust manufacturing system alongside specific standards and regulations that take into account wearables' unique characteristics. Seeing the whole picture will provide a frame reference and road map for researchers and industries through the design, manufacturing, and commercialisation of effective, portable, self-powered, multi-sensing ultimate future wearable devices and create opportunities for new innovations and applications.

Near-infrared-II ratiometric fluorescence probes for non-invasive detection and precise navigation surgery of metastatic sentinel lymph nodes

Sentinel lymph node (SLN) biopsy is the key diagnostic procedure to determine tumor metastasis and treatment plan. Current SLN biopsy has considerable drawbacks in that SLNs (both malignant and normal) must be removed by navigation surgery, followed by a time-consuming pathological examination. The selective, non-invasive, and real-time diagnosis of metastatic status in SLNs is becoming essential. Methods: Here, we design two lanthanide-doped nanoparticles as a pair of NIR-II ratiometric fluorescence probes, one of which is conjugated with tumor-targeting moiety, while the other is conjugated with PEG as an internal reference. The NIR-II ratiometric fluorescence signal (I_{1060 nm}/I_{1525 nm}) from two well-separated channels were used to identify the tumor-draining SLNs. The precise navigation surgery of metastatic SLNs was performed and we further evaluated their surgery outcomes. Results: The NIR-II ratiometric fluorescence facilitates an ideal fluorescence-guided surgery with only resection of tumor-positive SLNs, thereby avoiding unnecessary removal of the normal SLNs. In addition, our system has a time-saving operation procedure and can be performed under the operation light without altering the appearance of surgical settings. Conclusion: The present study enables non-invasive and real-time detection metastatic status in SLNs with high sensitivity and selectivity. Our investigations will provide a new direction for SLN biopsy and substantially improve cancer surgery outcomes.

Pore-Window Partitions in Metal-Organic Frameworks for Highly Efficient Reversed Ethylene/Ethane Separations

The development of paraffin-selective adsorbents is desirable but extremely challenging because adsorbents usually prefer olefin over paraffin. Herein, a new pore-window-partition strategy is proposed for the rational design of highly efficient paraffin-preferred metal-organic framework (MOF) adsorbents. The power of this strategy is demonstrated by stepwise installations of linear bidentate N-donor linkers into a prototype MOF (SNNU-201) to produce a series of partitional MOF adsorbents (SNNU-202-204). With continuous pore-window partitions from SNNU-201 to SNNU-204, the isosteric heat of adsorption can be tuned from -34.4 to -19.4 kJ mol^-1 for ethylene and from -25.5 to -20.7 kJ mol^-1 for ethane. Accordingly, partitional MOFs exhibit much higher ethane adsorption capacities, especially for SNNU-204 (104.6 cm³ g^-1), representing nearly 4 times as much ethane as the prototypical counterpart (SNNU-201; 27.5 cm³ g^-1) under ambient conditions. The C₂H₆/C₂H₄ ideal adsorbed solution theory selectivity, dynamic breakthrough experiments, and theoretical simulations further indicate that pore-window partition is a promising and universal strategy for the exploration of highly efficient paraffin-selective MOF adsorbents.

Novel Cerium-Based Sulfide Nano-Photocatalyst for Highly Efficient CO2 Reduction

To address the environmental crisis caused by excessive emissions of CO₂ , the development of effective photocatalysts for the conversion of CO₂ into chemicals has emerged as one of the most promising strategies. Herein, beyond those well-studied materials, a rare-earth sulfide-based nanocrystal NaCeS₂ is fabricated and investigated for efficient and selective conversion of CO₂ into CO, where the role of Ce ions is crucial. Firstly, the hybridization of Ce 4f and Ce 5d orbitals contributes to the photoresponsive band structure of NaCeS₂ . Secondly, due to the charge rearrangement supplied by the incompletely filled 4f orbitals of Ce ions, NaCeS₂ exhibits excellent charge separation efficiency and CO₂ adsorption affinity, reducing the energy barrier for the conversion from CO₂ to CO. Moreover, a NaCeS₂ -MoS₂ heterostructure is also designed to further boost the electron transfer from the Mo site to the Ce site, which results in an improvement of the catalytic reduction yield from 7.24 to 23.42 µmol g^-1 within 9 h (both better than TiO₂ controls). This work offers a platform for the development of rare-earth-based photocatalysts for CO₂ conversion.

Macroscale Conjugated Microporous Polymers: Controlling Versatile Functionalities Over Several Dimensions

Since discovered in 2007, conjugated microporous polymers (CMPs) have been developed for numerous applications including gas adsorption, sensing, organic and photoredox catalysis, energy storage, etc. While featuring abundant micropores, the structural rigidity derived from CMPs' stable π-conjugated skeleton leads to insolubility and thus poor processability, which severely limits their applicability, e.g., in CMP-based devices. Hence, the development of CMPs whose structure can not only be controlled on the micro- but also on the macroscale have attracted tremendous interest. In conventional synthesis procedures, CMPs are obtained as powders, but in recent years various bottom-up synthesis strategies have been developed, which yield CMPs as thin films on substrates or as hybrid materials, allowing to span length scales from individual conjugated monomers to micro-/macrostructures. This review surveys recent advances on the construction of CMPs into macroscale structures, including membranes, films, aerogels, sponges, and other architectures. The focus is to describe the underlying fabrication techniques and the implications which follow from the macroscale morphologies, involving new chemistry and physics in such materials for applications like molecular separation/filtration/adsorption, energy storage and conversion, photothermal transformation, sensing, or catalysis.

Atom-precise fluorescent copper cluster for tumor microenvironment targeting and transient chemodynamic cancer therapy

Background

Reactive oxygen species (ROS) have been widely studied for cancer therapy. Nevertheless, instability and aspecific damages to cellular biomolecules limit the application effect. Recently, significant research efforts have been witnessed in the flourishing area of metal nanoclusters (NCs) with atomically precise structures for targeted release of ROS but few achieved success towards targeting tumor microenvironment.

Results

In this work, we reported an atomically precise nanocluster Cu₆(C₄H₃N₂S)₆ (Cu₆NC), which could slowly break and generate ROS once encountered with acidic. The as-prepared Cu₆NC demonstrated high biological safety and efficient chemodynamic anti-tumor properties. Moreover, Cu₆NC enabled transient release of ROS and contained targeting behavior led by the tumor microenvironment. Both in vitro and in vivo experiments confirmed that Cu₆NC demonstrated a low cytotoxicity for normal cells, while presented high cytotoxicity for tumor cells with a concentration-dependent manner.

Conclusions

This work not only reported a promising candidate for chemodynamic cancer therapy, but also paved the route to address clinical issues at the atomic level.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-021-01207-6.

Aquaporin-Incorporated Graphene-Oxide Membrane for Pressurized Desalination with Superior Integrity Enabled by Molecular Recognition

Aquaporins (AQPs), the natural water channel, have been actively investigated for overcoming the limitations of conventional desalination membranes. An AQP-based biomimetic high-pressure desalination membrane is designed by tethering AQP-carrying red blood cell membrane (RBCM) vesicles onto graphene oxide (GO). RBCMs with AQPs are incorporated into GO based on the molecular recognition between the integrin of RBCM and Arginine-Glycine-Aspartate (RGD) ligand on the GO surface. GO is pre-functionalized with the Glycine-Arginine-Glycine-Aspartate-Serine peptide to capture RBCMs. RBCMs are inserted between GO flakes through the material-specific interaction between integrin of RBCM and RGD ligand, thus ensuring sufficient coverage of channels/defects in the GO for the full functioning of the AQPs. The incorporated AQPs are not completely fixed at the GO, as tethering is mediated by the integrin-RGD pair, and suitable AQP flexibility for appropriate functioning is guaranteed without frictional hindrance from the solid substrate. The integrity of the GO-RBCMs binding can provide mechanical strength for enduring high-pressure reverse-osmosis conditions for treating large amounts of water. This biomimetic membrane exhibits 99.1% NaCl rejection and a water permeance of 7.83 L m-2 h-1 bar-1 at 8 bar with a 1000-ppm NaCl feed solution, which surpasses the upper-bound line of current state-of-the-art membranes.

Exploring the dynamic impacts of COVID-19 on intercity travel in China

Many studies have explored the effects of transportation and population movement on the spread of pandemics. However, little attention has been paid to the dynamic impact of pandemics on intercity travel and its recovery during a public health event period. Using intercity mobility and COVID-19 pandemic data, this study adopts the gradient boosting decision tree method to explore the dynamic effects of the COVID-19 on intercity travel in China. The influencing factors were classified into daily time-varying factors and time-invariant factors. The results show that China's intercity travel decreased on average by 51.35% from Jan 26 to Apr 7, 2020. Furtherly, the COVID-19 pandemic reduces intercity travel directly and indirectly by influencing industry development and transport connectivity. With the spread of COVID-19 and changes of control measures, the relationship between intercity travel and COVID-19, socio-economic development, transport is not linear. The relationship between intercity travel and secondary industry is illustrated by an inverted U-shaped curve from pre-pandemic to post-pandemic, whereas that with tertiary industry can be explained by a U-shaped curve. Meanwhile, this study highlights the dynamic effect of the COVID-19 on intercity mobility. These implications shed light on policies regarding the control measures during public health events that should include the dynamic impact of pandemics on intercity travel.

On-chip four-mode (de-)multiplexer on thin film lithium niobate-silicon rich nitride hybrid platform

A four-mode (de-)multiplexer with transverse electric field light (TE₀-TE₃) is experimentally demonstrated on a thin film lithium niobate-silicon rich nitride hybrid platform. Enabled by cascaded asymmetrical directional couplers, a (de-)multiplexer with low insertion loss (0.38 dB to 1.6 dB) and low cross talk (-18.46dB to -20.43dB) is obtained at 1550 nm. All channels have cross talk <-16dB from 1480 nm to 1580 nm. The transmission of 4×50 Gbps on-off keying signals is experimentally achieved on the proposed (de-)multiplexer. Experimental results show that the proposed (de-)multiplexer is a promising approach to enhance the transmission capacity in thin film lithium niobate based photonics integrated circuits.

Extending photocatalysis to the visible and NIR: the molecular strategy

Photocatalysis exploits light to perform important processes as solar fuel production by water splitting, and CO2 reduction or water and air decontamination. Therefore, photocatalysis contributes to the satisfaction of the increasing needs for clean energy, environmental remediation and, most recently, sanification. Most of the efficient semiconductor nanoparticles (NP), developed as photocatalysts, work in the ultraviolet (UV) spectral region and they are not able to exploit either visible (Vis) or near infrared (NIR) radiation. This limitation makes them unable to fully exploit the broad band solar radiaton or to be applied in indoor conditions. Recently, different approaches have been developed to extend the spectral activity of semiconductor NP, like for example band-gap engineering, integration with upconversion NP and plasmonic enhancement involving also hot-electron injection. Nevertheless, the use of organic molecules and metal complexes, for enhancing the photoactivity in the Vis and NIR, was one of the first strategies proposed for sensitization and it is still one of the most efficient. In this minireview we highlight and critically discuss the most recent and relevant achievements in the field of photocatalysis obtained by exploiting dye sensitization either via dynamic or static quenching.

Sustainable Carbon Materials toward Emerging Applications

It is desirable for a sustainable society that the production and utilization of renewable materials are net-zero in terms of carbon emissions. Carbon materials with emerging applications in CO₂ utilization, renewable energy storage and conversion, and biomedicine have attracted much attention both academically and industrially. However, the preparation process of some new carbon materials suffers from energy consumption and environmental pollution issues. Therefore, the development of low-cost, scalable, industrially and economically attractive, sustainable carbon material preparation methods are required. In this regard, the use of biomass and its derivatives as a precursor of carbon materials is a major feature of sustainability. Recent advances in the synthetic strategy of sustainable carbon materials and their emerging applications are summarized in this short review. Emphasis is made on the discussion of the original intentions and various sustainable strategies for producing sustainable carbon materials. This review provides basic insights and significant guidelines for the further design of sustainable carbon materials and their emerging applications in catalysis and the biomedical field.

A Photopolymerized Semi-Interpenetrating Polymer Networks-Based Hydrogel Incorporated with Nanoparticle for Local Chemotherapy of Tumors

PURPOSE

To address the issue of local drug delivery in tumor treatment, a novel nanoparticle-hydrogel superstructure, namely semi-interpenetrating polymer networks (semi-IPNs) hydrogel composed of poly (ethylene glycol) diacrylate (PEGDA) and hyaluronic acid (HA) and incorporated with paclitaxel (PTX) loaded PLGA nanoparticles (PEGDA-HA/PLGA-PTX), was prepared by in situ UV photopolymerization for the use of local drug delivery.

METHODS

Using the gelation time, swelling rate and degradation rate as indicators, the optimal proportion of Irgacure 2959 initiator and the concentration of HA was screened and obtained for preparing hydrogels. Next, paclitaxel (PTX) loaded PLGA nanoparticles (PLGA-PTX NPs) were prepared by the emulsion solvent evaporation method.

RESULTS

The mass ratio of the initiator was 1%, and the best concentration of HA was 5 mg/mL in PEGDA-HA hydrogel. In vitro experiments showed that PLGA-PTX NPs had similar cytotoxicity to free PTX, and the cell uptake ratio on NCI-H460 cells was up to 96% by laser confocal microscopy and flow cytometry. The drug release of the PEGDA-HA/PLGA-PTX hydrogel local drug delivery system could last for 13 days. In vivo experiments proved that PEGDAHA/PLGA-PTX hydrogel could effectively inhibit the tumor growth without causing toxic effects in mice.

CONCLUSIONS

This study demonstrated that the PEGDA-HA/PLGA-PTX hydrogel is a promising local drug delivery system in future clinical applications for tumor therapy. A photopolymerized semi-interpenetrating polymer networks-based hydrogel incorporated with paclitaxel-loaded nanoparticles was fabricated by in situ UV photopolymerization, providing a promised nanoplatform for local chemotherapy of tumors.

High-performance gallium nitride dielectric metalenses for imaging in the visible

Metalens is one of the most promising applications for the development of metasurfaces. A wide variety of materials have been applied to metalenses working at certain spectral bands in order to meet the requirements of high efficiency and low-cost fabrication. Among these materials, wide-bandgap gallium nitride (GaN) is one of the most promising materials considering its advantages especially in semiconductor manufacturing. In this work, GaN has been utilized to fabricate the high-performance metalenses operating at visible wavelengths of 405, 532, and 633 nm with efficiencies up to 79%, 84%, and 89%, respectively. The homemade 1951 United State Air Force (UASF) resolution test chart has also been fabricated in order to provide resolvable lines with widths as small as 870 nm. As shown in the experimental results for imaging, the metalens designed at 405 nm can provide extremely high resolution to clearly resolve the smallest lines with the nano-sized widths in the homemade resolution test chart. These extraordinary experimental results come from our successful development in design and fabrication for the metalenses composed of high-aspect-ratio GaN nanoposts with nearly vertical sidewalls.

Graphether: a reversible and high-capacity anode material for sodium-ion batteries with ultrafast directional Na-ion diffusion

Sodium-ion batteries (SIBs) have been attracting great attention as the most promising alternative to lithium-ion batteries (LIBs) for large-scale energy storage. However, the absence of suitable anode materials is the main bottleneck for the commercial application of SIBs. Herein, the adsorption and diffusion behaviors of Na on graphether are predicted by first-principles density functional calculations. Our results show that Na atoms can be adsorbed on graphether forming a uniform and stable coverage on both sides. Even at low intercalated Na concentrations, the semiconducting graphether can be changed to a metallic state, ensuring good electrical conductivity. Due to the structural anisotropy of graphether, the Na+ ions show a remarkable one-dimensional diffusion with an ultralow energy barrier of 0.04 eV, suggesting ultrafast charge/discharge characteristics. The graphether monolayer has a high theoretical specific capacity of 670 mA h g-1, which is much higher than commercial graphite anode materials. Furthermore, the average voltage is 1.58 V, comparable with that of commercial TiO2 anode materials for LIBs (1.5 V). During the charge/discharge process, graphether could mostly preserve the structural integrity upon the adsorption of Na even at the maximum concentration, suggesting its good reversibility. All these results show that graphether is a promising anode material for high-performance SIBs.