Two-dimensional gersiloxenes with tunable bandgap for photocatalytic H2 evolution and CO2 photoreduction to CO

GFP Chromophore Integrated Conjugated Microporous Polymers toward Bioinspired Photocatalytic CO2 Reduction to CO

The development of highly active, durable, and low-cost metal-free catalysts for the photocatalytic CO2 reduction reaction (CO2RR) is an efficient and environmentally friendly solution to address significant problems like global warming and high energy demand. In the present study, we have demonstrated the design and synthesis of a donor-acceptor based conjugated microporous polymer (CMP), TPA-GFP, by integrating an electron donor, tris(4-ethynylphenyl)amine (TPA), with a green fluorescent protein chromophore analogue (Z)-4-(2-hydroxy-3,5-diiodobenzylidene)-1-(4-iodophenyl)-2-methyl-1H-imidazol-5(4H)-one (o-HBDI-I3) (GFP). In comparison to nondonor 1,3,5-triethynylbenzene (TEB) based TEB-GFP CMP, photocatalytic CO2 reduction using donor-acceptor based TPA-GFP CMP displays a 3-fold increment of CO production yield with a maximum CO yield of 1666 μmol g-1 at 12 h. Further, the CO selectivity increases significantly from a mere 54% in TEB-GFP to an impressive 95% in TPA-GFP. The impressive CO2 reduction efficiency and selectivity for TPA-GFP can be attributed to the efficient light-harvesting capability and facile charge separation and migration through donor-acceptor building units of the CMP. The mechanistic aspect of the photocatalytic CO2 reduction process is explored using in situ DRIFTS and DFT calculation, and a plausible photocatalytic mechanism is proposed.

Covalent Organic Framework with Donor1-Acceptor-Donor2 Motifs Regulating Local Charge of Intercalated Single Cobalt Sites for Photocatalytic CO2 Reduction to Syngas

Covalent organic framework (COF) has attracted increasing interest in photocatalytic CO2 reduction, but it remains a challenge to achieve high conversion efficiency owing to the insufficient active site and fast charge recombination. Rationally optimizing the electronic structures of COF to regulate the local charge of active sites precisely is the key point to improving catalytic performance. Herein, intercalated single Co sites coordinated by imine-N motifs have been designed by using trinuclear copper-based imine-COFs with distinct electronic moieties via a molecular engineering strategy. It is confirmed that the charge delivery property and local charge distribution of these heterometallic frameworks can be profoundly influenced by electronic structures. Among these featured structures with mixed-state copper clusters, Co/Cu3-TPA-COF stands out for an exceptional photocatalytic CO2 reduction activity and tunable syngas (CO/H2) ratio by changing various bipyridines. Experimental and theoretical results indicate that interlayer Co-imine N motifs on the donor1-acceptor-donor2 structures facilitate the formation of a highly separated electron-hole state, which effectively induces the oriented electron transfer from dual electron donors to Co centers, achieving an enhanced CO2 activation and reduction. This work opens up an avenue for the design of high-performance COF-based catalysts for photocatalytic CO2 reduction.

In-Situ Hydrothermal Fabrication of ZnO-Loaded GAC Nanocomposite for Efficient Rhodamine B Dye Removal via Synergistic Photocatalytic and Adsorptive Performance

In this work, zinc oxide (ZnO)/granular activated carbon (GAC) composites at different ZnO concentrations (0.25M-ZnO@GAC, 0.5M-ZnO@GAC, and 0.75M-ZnO@GAC) were prepared by an in-situ hydrothermal method and demonstrated synergistic photocatalytic degradation and adsorption of rhodamine B (RhB). The thermal stability, morphological structure, elemental composition, crystallographic structure, and textural properties of developed catalysts were characterized by thermal gravimetric analysis (TGA/DTG), scanning electron microscopy equipped with energy dispersive-x-ray (SEM-EDS), X-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET) analysis. The successful loading of ZnO onto GAC was confirmed by SEM-EDS and XRD analysis. The BET surface areas of GAC, 0.25M-ZnO@GAC, 0.5M-ZnO@GAC, and 0.75M-ZnO@GAC were 474 m2/g, 450 m2/g, 453 m2/g, and 421 m2/g, respectively. The decrease in GAC could be attributed to the successful loading of ZnO on the GAC surface. Notably, 0.5M-ZnO@GAC exhibited the best photocatalytic degradation efficiency of 82% and 97% under UV-A and UV-C light over 120 min, attributed to improved crystallinity and visible light absorption. The photocatalytic degradation parameters revealed that lowering the RhB concentration and raising the catalyst dosage and pH beyond the point of zero charge (PZC) would favor the RhB degradation. Photocatalytic reusability was demonstrated over five cycles. Scavenger tests revealed that the hydroxyl radicals (•OH), superoxide radicals (O2-•), and photoinduced hole (h+) radicals play a major role during the RhB degradation process. Based on the TOC results, the RhB mineralization efficiency of 79.1% was achieved by 0.5M-ZnO@GAC. Additionally, GAC exhibited a strong adsorptive performance towards RhB, with adsorption capacity and the RhB removal of 487.1 mg/g and 99.5% achieved within 90 min of equilibrium time. The adsorption characteristics were best described by pseudo-second-order kinetics, suggesting chemical adsorption. This research offers a new strategy for the development of effective photocatalyst materials with potential for wider wastewater treatment applications.

Doping and strain modulation of the electronic, optical and photocatalytic properties of the GaN/C2N heterostructure

The electronic, optical and photocatalytic properties of GaN/C2N van der Waals heterostructures are investigated using the first-principles theory, and effective regulation through element doping or strain is achieved further. The results show that the GaN/C2N heterostructure exhibits a type-II band alignment with an indirect band gap of 2.25 eV, which benefits photocatalytic water splitting. In this study, both type-I and type-II band alignments can be obtained through doping or strain modulation. Doping with P or As atoms reduces the band gap of the GaN/C2N heterostructure and transforms it to a type-I direct bandgap semiconductor, which makes the doped GaN/C2N heterostructure more suitable for optoelectronic devices. In addition, the GaN/C2N heterostructure retains type-II band alignment and has a decreased band gap under tensile strain (0 to +4%), which is more favorable for photocatalytic water splitting. Compressive strain (0 to -4%) converts the type-II band alignment to type-I, resulting in a wider light absorption range, making the GaN/C2N heterostructure more suitable for optoelectronic devices. These theoretical results are helpful for the design of GaN/C2N vdW heterostructures in the fields of optoelectronic devices and photocatalysts.

Photocatalytic CO2 Reduction Using an Osmium Complex as a Panchromatic Self-Photosensitized Catalyst: Utilization of Blue, Green, and Red Light

The photocatalytic reduction of carbon dioxide (CO2) represents an attractive approach for solar-energy storage and leads to the production of renewable fuels and valuable chemicals. Although some osmium (Os) photosensitizers absorb long wavelengths in the visible-light region, a self-photosensitized, mononuclear Os catalyst for red-light-driven CO2 reduction has not yet been exploited. Here, we discovered that the introduction of an Os metal to a PNNP-type tetradentate ligand resulted in the absorption of light with longer-wavelength (350-700 nm) and that can be applied to a panchromatic self-photosensitized catalyst for CO2 reduction to give mainly carbon monoxide (CO) with a total turnover number (TON) of 625 under photoirradiation (λ≥400 nm). CO2 photoreduction also proceeded under irradiation with blue (λ0=405 nm), green (λ0=525 nm), or red (λ0=630 nm) light to give CO with >90 % selectivity. The quantum efficiency using red light was determined to be 12 % for the generation of CO. A catalytic mechanism is proposed based on the detection of intermediates using various spectroscopic techniques, including transient absorption, electron paramagnetic resonance, and UV/Vis spectroscopy.

Non-Photochemical Origin of Selectivity Difference between Light and Dark Catalytic Conditions

The interest in introducing light into heterogeneous catalysis is driven not only by the urgent need of replacing fossil energy but also by the promise of controlling product selectivity by light. The product selectivity differences observed in recent studies between light and dark reactions are often attributed to photochemical effects. Here, we report the discovery of a non-photochemical origin of selectivity difference, at essentially the same CO2 conversion rate, between photothermal and thermal CO2 hydrogenation reactions over a Ru/TiO2-x catalyst. While the presence of the photochemical effect from ultraviolet light is confirmed, it merely enhances the catalytic activity. Systematic investigation reveals that the gradual formation of an adsorbate-mediated strong metal-support interaction under catalytic conditions is responsible for the variation in the catalytic selectivity. We demonstrate that differences in product selectivity under light/dark reactions do not necessarily originate from photochemical effects. Our study refines the basis for determining photochemical effects and highlights the importance of excluding non-photochemical effects in mechanistic studies of light-controlled product selectivity.

Advances in zeolitic-imidazolate-framework-based catalysts for photo-/electrocatalytic water splitting, CO2 reduction and N2 reduction applications

Harnessing electrical or solar energy for the renewable production of value-added fuels and chemicals through catalytic processes (such as photocatalysis and electrocatalysis) is promising to achieve the goal of carbon neutrality. Owing to the large number of highly accessible active sites, highly porous structure, and charge separation/transfer ability, as well as excellent stability against chemical and electrochemical corrosion, zeolite imidazolate framework (ZIF)-based catalysts have attracted significant attention. Strategic construction of heterojunctions, and alteration of the metal node and the organic ligand of the ZIFs effectively regulate the binding energy of intermediates and the reaction energy barriers that allow tunable catalytic activity and selectivity of a product during reaction. Focusing on the currently existing critical issues of insufficient kinetics for electron transport and selective generation of ideal products, this review starts from the characteristics and physiochemical advantages of ZIFs in catalytic applications, then introduces promising regulatory approaches for advancing the kinetic process in emerging CO2 reduction, water splitting and N2 reduction applications, before proposing perspective modification directions.

Advances on sonophotocatalysis as a water and wastewater treatment technique: efficiency, challenges and process optimisation

Due to water shortage and increased water pollution, various methods are being explored to improve water quality by treating contaminants. Sonophotocatalysis is a combination of two individual water treatment processes i.e., photocatalysis and sonocatalysis. With advantages including shorter reaction times and enhanced activity, this technique shows possible futuristic applications as an efficient water treatment technology. Herein, background insight on sonophotocalysis as a water and wastewater treatment technique as well as the general mechanism of activity is explained. The commonly used catalysts for sonophotocatalytic applications as well as their synthesis pathways are also briefly discussed. Additionally, the utilisation of sonophotocatalysis for the disinfection of various microbial species as well as treatment of wastewater pollutants including organic (dyes, pharmaceuticals and pesticides) and inorganic species (heavy metals) is deliberated. This review also gives a critical analysis of the efficiency, enhancement strategies as well as challenges and outlooks in this field. It is thus intended to give insight to researchers in the context of facilitating future developments in the field of water treatment, and advancing sonophotocatalysis towards large-scale implementation and commercialization.

Facile synthesis of high-entropy alloy nanoparticles on germanane, Ge nanoparticles and wafers

The unique solid-solution structure and multi-element compositions of high-entropy alloy nanoparticles (HEA NPs) have garnered substantial attention. Various methods have been developed to prepare a diverse array of HEA NPs using different substrates for support and stabilization. In this study, we present a facile surface-mediated reduction method to prepare HEA NPs (AuAgCuPdPt) decorated germanane (HEA NPs@GeNSs), and employ X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM) to characterize their structure, composition, and morphology. Subsequently, we demonstrate that the HEA NPs can be liberated from the surfaces of GeNSs as freestanding systems via straightforward exposure to UV light. We also explore germanium nanoparticles (GeNPs) as an alternative substrate for HEA NP formation/production, given their similarity to germanane and their Ge-H surface. Finally, we extend our investigation to bulk Ge wafers and demonstrate successful deposition of HEA NPs.

Simultaneous photocatalytic biomass conversion and CO2 reduction over high crystalline oxygen-doped carbon nitride

Simultaneous photocatalytic biorefinery and CO2 reduction to co-produce fuels and high value-added chemicals have recently attracted significant attention; however, comprehensive studies are still lacking. Herein, we report the preparation of highly crystalline oxygen-doped carbon nitride nanotubes (O-CNNTs-x) using an ammonium fluoride-assisted hydrothermal/calcination strategy. The hollow structure, high crystallinity, and O incorporation endowed the O-CNNTs-x with photocatalytic activity by considerably improving optical absorption and modulating the charge carrier motion. The lactic acid yield and CO evolution rate over O-CNNTs-2.0 reached 82.08% and 67.95 μmol g-1 h-1, which are 1.57- and 7.37-fold times higher than those of CN, respectively. Moreover, ·OH plays a key role in the oxidation half-reaction. This study offers a facile approach for fabricating highly crystalline element-doped CN with a customizable morphology and electronic properties and demonstrates the viability of co-photocatalytic CO2 reduction and biomass selective oxidation.

In Situ Growth of Lead-Free Cs2CuBr4 Perovskite Quantum Dots in KIT-6 Mesoporous Molecular Sieve for CO2 Adsorption, Activation, and Reduction

Metal halide perovskites (MHPs) are emerging as promising candidates for photocatalytic CO₂ conversion. However, their practical application is still restricted by the poor intrinsic stability and weak adsorption/activation toward CO₂ molecules. The rational design of MHPs-based heterostructures with high stability and abundant active sites is a potential solution to this obstacle. Herein, we report the in situ growth of lead-free Cs₂CuBr₄ perovskite quantum dots (PQDs) in KIT-6 mesoporous molecular sieve, obtaining remarkable photocatalytic CO₂ reduction activity and durable stability. The optimized Cs₂CuBr₄@KIT-6 heterostructure exhibits the photocatalytic CO and CH₄ evolution rates of 51.6 and 17.2 μmol g^-1 h^-1, respectively, far exceeding those of pristine Cs₂CuBr₄. On the basis of in situ diffuse reflectance infrared Fourier transform spectra and theoretical investigations, the detailed CO₂ photoreduction pathway is systematically revealed. This work provides a new route for the rational construction of perovskite-based heterostructures with strong CO₂ adsorption/activation and good stability for photocatalytic CO₂ reduction.

Ingenious Artificial Leaf Based on Covalent Organic Framework Membranes for Boosting CO2 Photoreduction

Covalent organic frameworks (COFs) hold the potential in converting CO₂ with water into value-added fuels and O₂ to save the deteriorating ecological environment. However, reaching high yield and selectivity is a grand challenge under metal-, photosensitizer-, or sacrificial reagent-free conditions. Here, inspired by microstructures of natural leaves, we designed triazine-based COF membranes with the integration of steady light-harvesting sites, efficient catalytic center, and fast charge/mass transfer configuration to fabricate a novel artificial leaf for the first time. Significantly, a record high CO yield of 1240 μmol g^-1 in a 4 h reaction, approximately 100% selectivity, and a long lifespan (at least 16 cycles) were achieved under gas-solid conditions without using any metal, photosensitizer, or sacrificial reagent. Unlike the existing knowledge, the chemical structural unit of triazine-imide-triazine and the unique physical form of the COF membrane are predominant for such a remarkable photocatalysis. This work opens a new pathway to simulating photosynthesis in leaves and may motivate relevant research in the future.

An electron-hole rich dual-site nickel catalyst for efficient photocatalytic overall water splitting

Photocatalysis offers an attractive strategy to upgrade H₂O to renewable fuel H₂. However, current photocatalytic hydrogen production technology often relies on additional sacrificial agents and noble metal cocatalysts, and there are limited photocatalysts possessing overall water splitting performance on their own. Here, we successfully construct an efficient catalytic system to realize overall water splitting, where hole-rich nickel phosphides (Ni₂P) with polymeric carbon-oxygen semiconductor (PCOS) is the site for oxygen generation and electron-rich Ni₂P with nickel sulfide (NiS) serves as the other site for producing H₂. The electron-hole rich Ni₂P based photocatalyst exhibits fast kinetics and a low thermodynamic energy barrier for overall water splitting with stoichiometric 2:1 hydrogen to oxygen ratio (150.7 μmol h^-1 H₂ and 70.2 μmol h^-1 O₂ produced per 100 mg photocatalyst) in a neutral solution. Density functional theory calculations show that the co-loading in Ni₂P and its hybridization with PCOS or NiS can effectively regulate the electronic structures of the surface active sites, alter the reaction pathway, reduce the reaction energy barrier, boost the overall water splitting activity. In comparison with reported literatures, such photocatalyst represents the excellent performance among all reported transition-metal oxides and/or transition-metal sulfides and is even superior to noble metal catalyst.

Bandgap-Engineered Germanene Nanosheets as an Efficient Photodynamic Agent for Cancer Therapy

Two-dimensional (2D) monoelemental materials (Xenes) show considerable potential in bioapplications owing to their unique 2D physicochemical features and the favored biosafety resulting from their monoelemental composition. However, the narrow band gaps of Xenes prevent their broad applications in biosensors, bioimaging and phototherapeutics. In this study, it is demonstrated that 2D germanene terminated with -H via surface chemical engineering, shows a much broadened direct band gap of 1.65 eV, which enables the material to be used as a novel inorganic photosensitizer for the photodynamic therapy of singlet oxygen. Through theoretical analysis and in vitro studies, H-germanene nanosheets demonstrate a substantially enlarged band gap and favorable biodegradability, demonstrating a substantial cancer treatment capacity. This study demonstrates the feasibility of constructing novel therapeutic photodynamic agents by surface covalent engineering for catalytic tumor therapy.

Bandgap‐Engineered Germanene Nanosheets as an Efficient Photodynamic Agent for Cancer Therapy

Two‐dimensional (2D) monoelemental materials (Xenes) show considerable potential in bioapplications owing to their unique 2D physicochemical features and the favored biosafety resulting from their monoelemental composition. However, the narrow band gaps of Xenes prevent their broad applications in biosensors, bioimaging and phototherapeutics. In this study, it is demonstrated that 2D germanene terminated with −H via surface chemical engineering, shows a much broadened direct band gap of 1.65 eV, which enables the material to be used as a novel inorganic photosensitizer for the photodynamic therapy of singlet oxygen. Through theoretical analysis and in vitro studies, H‐germanene nanosheets demonstrate a substantially enlarged band gap and favorable biodegradability, demonstrating a substantial cancer treatment capacity. This study demonstrates the feasibility of constructing novel therapeutic photodynamic agents by surface covalent engineering for catalytic tumor therapy.

Nickel hexacyanoferrate nanoparticle-decorated 3D rGO composites-based electrochemical sensing platform for detection of di-2-ethylhexyl phthalate

A label-free and efficient electrochemical (EC) sensing platform for di-2-ethylhexyl phthalate (DEHP) was developed based on in situ probe nickel hexacyanoferrate nanoparticle (NiHCF NP)-decorated three-dimensional reduced graphene oxide (3D rGO) composites. NiHCF NPs in the composites as an in situ probe show a pair of well-defined peaks with good reversibility and stability. Coupling 3D rGO with NiHCF NPs not only improved the electron transfer capability of NiHCF NPs but also provided more sites for aptamer immobilization. The synthesized NiHCF NP-decorated 3D rGO composites were used to act as a substrate for the immobilization of anti-DEHP aptamer by the covalent bonding method. The designed EC sensing platform displays excellent sensing performance for DEHP with a low detection limit of 3.64 pg/L, and a linear working range of 0.01 - 1000 ng/L. The application of the sensing platform to actual environmental samples was studied and satisfactory results were obtained. Thus, the proposed EC sensing platform would provide a potential tool for efficient detection of pollutants in the environment.

2D Functionalized Germananes: Synthesis and Applications

In the realm of 2D layered materials, the monoelemental group 14 Xene, germanene, as the germanium analog of graphene, has emerged as the next prospective candidate. Preceded by silicon, germanium is widely used in the semiconductor industry; thus, germanene is deemed compatible with existing semiconductor technologies. Germanene consists of mixed sp² -sp³ -hybridized networks in a buckled hexagonal honeycomb structure. Chemical exfoliation of Zintl phases, such as CaGe₂ , specifically the topotactical deintercalation in acidic media, removes the alkaline earth metal ions Ca²⁺ , giving rise to layered germanane (germanene with the Ge centers covalently saturated with terminal hydrogen atoms). Diverse variants of functionalized germananes (with covalent group(s) termination) can be obtained by varying the topotactical deintercalation precursors, elevating the game with limitless functionalization possibilities for customizable properties or new functionalities. The preparation of Zintl phases to the details of functionalized and modified germananes and their properties, and the additional exfoliation step to achieve mono- or few-layer germananes, are comprehensively covered. The progress and challenges of 2D functionalized germananes in optoelectronics, catalysis, energy conversion and storage, sensors, and biomedical areas are reviewed. This review provides insight into designing and exploring this class of atomically thin semiconductors in realizing future nanoarchitectonics.

Environmentally sustainable implementations of two-dimensional nanomaterials

Rapid advancement in nanotechnology has led to the development of a myriad of useful nanomaterials that have novel characteristics resulting from their small size and engineered properties. In particular, two-dimensional (2D) materials have become a major focus in material science and chemistry research worldwide with substantial efforts centered on their synthesis, property characterization, and technological, and environmental applications. Environmental applications of these nanomaterials include but are not limited to adsorbents for wastewater and drinking water treatment, membranes for desalination, and coating materials for filtration. However, it is also important to address the environmental interactions and implications of these nanomaterials in order to develop strategies that minimize their environmental and public health risks. Towards this end, this review covers the most recent literature on the environmental implementations of emerging 2D nanomaterials, thereby providing insights into the future of this fast-evolving field including strategies for ensuring sustainable development of 2D nanomaterials.

Metal nanoparticle-decorated germanane for selective photocatalytic aerobic oxidation of benzyl alcohol

Two dimensional materials such as germanane have attracted substantial research interest due to their unique chemical, optical, and electronic properties. A variety of methods for introducing diverse functionalities to their surfaces have been reported and these materials have been exploited as photocatalysts. Herein, we report the preparation of metal nanoparticle (Au, Ag, Cu, Pd, Pt) decorated germanane (M@GeNSs) via facile surface-mediated reduction and investigate their structure, composition, as well morphology using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). These functional materials were subsequently explored as photocatalysts for selective visible light-induced oxidation of benzyl alcohol to benzaldehyde as freestanding nanosystems and thin films and a reaction mechanism of the photocatalytic oxidation of benzyl alcohol is proposed.

Accommodation of Two-Dimensional SiOx in a Point-to-Plane Conductive Network Composed of Graphene and Nitrogen-Doped Carbon for Robust Lithium Storage

Silicon oxides (SiO_x) are one of the most promising anode materials for next-generation lithium-ion batteries owing to their abundant reserve and low lost and high reversible capacity. However, the practical application of SiO_x is still hindered by their intrinsically low conductivity and huge volume change. In this regard, we design a novel anode material in which sheet-like SiO_x nanosheets are encapsulated in a unique point-to-plane conductive network composed of graphene flakes and nitrogen-doped carbon spheres. This unique composite structure demonstrates high specific capacity (867.7 mAh g^-1 at 0.1 A g^-1), superior rate performance, and stable cycle life. The electrode delivers a superior reversible discharge capacity of 595.8 mAh g^-1 after 200 cycles at 1.0 A g^-1 and 287.5 mAh g^-1 after 500 cycles at 5.0 A g^-1. This work may shed light on the rational design of SiO_x-based anode materials for next-generation high-performance lithium-ion batteries.

2D Magnetic Semiconductor Fe3GeTe2 with Few and Single Layers with a Greatly Enhanced Intrinsic Exchange Bias by Liquid-Phase Exfoliation

A 2D van der Waals (vdW) magnet can get rid of the constraints of lattice matching and compatibility and then create a variety of vdW heterostructures, which provides a opportunity for spintronic devices. However, the ability to reliably exfoliate large, high-quality vdW ferromagnetic Fe₃GeTe₂ (FGT) nanoflakes in scaled-up production is severely limited. Herein, an efficient and stable three-stage sonication-assisted liquid-phase exfoliation was developed for mass preparation of high-structural-integrity few- and single-layer FGT nanoflakes with a greatly enhanced intrinsic exchange bias. The three stages include slicing crystals, weakening interlayer vdW forces, and using ultrasonic cavitation. The highest yield of FGT nanoflakes is 22.3 wt % with single layers accounting for 6%. The size is controllable, and several micrometers, tens of micrometers, and a maximum of 103 μm are available. The 200 mg level output has overcome the limitations of mechanical exfoliation and molecular beam epitaxy in economically amplificated production. An intrinsic exchange bias is observed in the restacked nanoflakes due to the magnetic proximity on the interface of the FGT/natural surface oxide layer. The material reaches 578 Oe (2 K) and 2300 Oe after further oxidation, at least 250% higher than other precisely tailored vdW magnetic heterostructures. In addition, the unusual semiconductivity of the liquid-phase exfoliated FGT nanoflakes is reported. This work skillfully utilizes oxidation to enhance the potential of FGT for large-scale spintronics, optoelectronics, efficient data storage, and various extended applications, and it is beneficial for exfoliating other promising magnetic vdW materials.

Hydrogenated Germanene Nanosheets as an Antioxidative Defense Agent for Acute Kidney Injury Treatment

Acute kidney injury (AKI) is a sudden kidney dysfunction caused by aberrant reactive oxygen species (ROS) metabolism that results in high clinical mortality. The rapid development of ROS scavengers provides new opportunities for AKI treatment. Herein, the use of hydrogen-terminated germanene (H-germanene) nanosheets is reported as an antioxidative defense nanoplatform against AKI in mice. The simulation results show that 2D H-germanene can effectively scavenge ROS through free radical adsorption and subsequent redox reactions. In particular, the H-germanene exhibits high accumulation in injured kidneys, thereby offering a favorable opportunity for treating renal diseases. In the glycerol-induced murine AKI model, H-germanene delivers robust antioxidative protection against ROS attack to maintain normal kidney function indicators without negative influence in vivo. This positive in vivo antioxidative defense in living animals demonstrates that the present H-germanene nanoplatform is a powerful antioxidant against AKI and various anti-inflammatory diseases.

Hydrogenated Germanene Nanosheets as an Antioxidative Defense Agent for Acute Kidney Injury Treatment

Acute kidney injury (AKI) is a sudden kidney dysfunction caused by aberrant reactive oxygen species (ROS) metabolism that results in high clinical mortality. The rapid development of ROS scavengers provides new opportunities for AKI treatment. Herein, the use of hydrogen‐terminated germanene (H‐germanene) nanosheets is reported as an antioxidative defense nanoplatform against AKI in mice. The simulation results show that 2D H‐germanene can effectively scavenge ROS through free radical adsorption and subsequent redox reactions. In particular, the H‐germanene exhibits high accumulation in injured kidneys, thereby offering a favorable opportunity for treating renal diseases. In the glycerol‐induced murine AKI model, H‐germanene delivers robust antioxidative protection against ROS attack to maintain normal kidney function indicators without negative influence in vivo. This positive in vivo antioxidative defense in living animals demonstrates that the present H‐germanene nanoplatform is a powerful antioxidant against AKI and various anti‐inflammatory diseases.

Two-Dimensional Porphyrin-Based Covalent Organic Framework with Enlarged Inter-layer Spacing for Tunable Photocatalytic CO2 Reduction

Two-dimensional (2D) porphyrin-based covalent organic frameworks (COFs) are one of the most promising candidates for photocatalytic carbon dioxide reduction reaction (CO₂RR), which however still suffer from the hindered mass transfer during the catalysis procedure associated with the close packing of 2D COF layers due to the strong axial π-π stacking. Herein, condensation between the porphyrinic aldehydes p-MPor-CHO (M = H₂, Co, and Ni) and 3,8-diamino-6-phenyl-phenanthridine (DPP) affords new porphyrin-based 2D COF architecture MPor-DPP-COFs (M = H₂, Co, and Ni). The bulky phenyl substituent at the phenanthridine periphery of the linking unit reduces the axial π-π stacking, providing an enlarged inter-layer spacing of 6.0 Å according to high-resolution transmission electron microscopy. This, in combination with the large surface area (1021 m² g^-1) revealed by nitrogen sorption measurements at 77 K for CoPor-DPP-COF possessing electroactive Co ions, endows it with excellent photocatalytic activity for CO₂RR with a CO generation rate of 10 200 μmol g^-1 h^-1 and a CO selectivity up to 82%. This work affords new ideas for achieving efficient photocatalytic CO₂RR upon fine-tuning the inter-layer spacing of 2D COFs.

Two Dimensional Silicene Nanosheets: A New Choice of Electrode Material for High-Performance Supercapacitor

Two dimensional (2D) nanomaterials, including graphene, layered double hydroxides, layered transition metal dichalcogenides, and Mxenes, have demonstrated versatility in the fields of bioengineering, sensor, energy storage and conversion by virtue of unique mechanical, thermal, optical, and electrical properties. Nevertheless, integrating silicon-based materials into high-performance energy devices is relatively scarce and highly appreciable because of the challenging production technology. Herein, we reported that silicene was triumphantly assembled into a high-voltage symmetric supercapacitor, which possesses a wide operating potential window (0-3 V), a maximum specific capacitance of 0.41 mF cm^-2, a high energy density of 1.22 mJ cm^-2, a high power density of 0.49 mW cm^-2, and an excellent cycling stability of 96.6% capacitance retention after 10 000 cycles. The comprehensive performance of the silicene high-voltage symmetric supercapacitor is superior to that of the reported silicon-based materials. First-principles calculations reveal that monolayer or few-layer silicene with shorter ion diffusion pathways and higher utilization efficiency of active sites improves ion transport and electron transfer kinetics on the surfaces. To the best of our knowledge, it is the first time that silicene has been applied to the field of supercapacitors. This work will open up new horizons toward the material science research of electrochemical energy devices as well as help to promote the development of the high-performance supercapacitor industry.

Light-Induced Structural Dynamic Evolution of Pt Single Atoms for Highly Efficient Photocatalytic CO2 Reduction

Revealing the structural evolution of the real active site during photocatalysis is very important for understanding the catalytic mechanism, but it remains a great challenge. By employing single atoms (SAs) as the mechanism research platform, we investigated the variation of the SA structure under light and the corresponding reaction pathway controlment mechanism. In particular, taking the defect anchoring strategy, Pt SAs are anchored on the metal ion vacancy-rich ZnNiTi layered double hydroxide-etched (ZnNiTi-LDHs-E) support. It is proved by CO-Fourier transform infrared and X-ray absorption fine structure characterization methods that the Pt SAs could gain photoelectrons to form cationic Pt(IV), electron-rich Pt(II), and near-neutral Ptδ+ species at different light intensities. By in situ inducing the above different Pt SAs in photocatalytic CO2 reduction, a dramatic product distribution is observed: (1) under weak light, Pt(IV) SAs cannot activate CO, so CO cannot be further transformed into hydrocarbons; (2) under the moderate light, electron-rich Pt(II) SAs could cooperate with adjacent LDH surface sites (Ni2+/Ti4+) to open up the C-C coupling route for C2H6 generation; and (3) Pt SAs in the state of near-neutral Ptδ+ could directly hydrogenate CO into CH4. This work reveals the structural evolution of Pt SAs in photocatalysis and the corresponding effect on catalytic performance, which provides a new idea for the construction of highly efficient photocatalysts.

Progress in Development of Photocatalytic Processes for Synthesis of Fuels and Organic Compounds under Outdoor Solar Light

With photovoltaics becoming a mature, commercially feasible technology, society is willing to allocate resources for developing and deploying new technologies based on using solar light. Analysis of projects supported by the European Commission in the past decade indicates exponential growth of funding to photocatalytic (PC) and photoelectrocatalytic (PEC) technologies that aim either at technology readiness levels (TRLs) TRL 1-3 or TRL > 3, with more than 75 Mio€ allocated from the year 2019 onward. This review provides a summary of PC and PEC processes for the synthesis of bulk commodities such as solvents and fuels, as well as chemicals for niche applications. An overview of photoreactors for photocatalysis on a larger scale is provided. The review rounds off with the summary of reactions performed at lab scale under natural outdoor solar light to illustrate conceptual opportunities offered by solar-driven chemistry beyond the reduction of CO₂ and water splitting. The authors offer their vision of the impact of this area of research on society and the economy.

Novel Cerium-Based Sulfide Nano-Photocatalyst for Highly Efficient CO2 Reduction

To address the environmental crisis caused by excessive emissions of CO₂ , the development of effective photocatalysts for the conversion of CO₂ into chemicals has emerged as one of the most promising strategies. Herein, beyond those well-studied materials, a rare-earth sulfide-based nanocrystal NaCeS₂ is fabricated and investigated for efficient and selective conversion of CO₂ into CO, where the role of Ce ions is crucial. Firstly, the hybridization of Ce 4f and Ce 5d orbitals contributes to the photoresponsive band structure of NaCeS₂ . Secondly, due to the charge rearrangement supplied by the incompletely filled 4f orbitals of Ce ions, NaCeS₂ exhibits excellent charge separation efficiency and CO₂ adsorption affinity, reducing the energy barrier for the conversion from CO₂ to CO. Moreover, a NaCeS₂ -MoS₂ heterostructure is also designed to further boost the electron transfer from the Mo site to the Ce site, which results in an improvement of the catalytic reduction yield from 7.24 to 23.42 µmol g^-1 within 9 h (both better than TiO₂ controls). This work offers a platform for the development of rare-earth-based photocatalysts for CO₂ conversion.

Inverse Vulcanization of a Natural Monoene with Sulfur as Sustainable Electrochemically Active Materials for Lithium-Sulfur Batteries

A novel soluble copolymer poly(S-MVT) was synthesized using a relatively quick one-pot solvent-free method, inverse vulcanization. Both of the two raw materials are sustainable, i.e., elemental sulfur is a by-product of the petroleum industry and 4-Methyl-5-vinylthiazole (MVT) is a natural monoene compound. The microstructure of poly(S-MVT) was characterized by FT-IR, 1H NMR, XPS spectroscopy, XRD, DSC SEM, and TEM. Test results indicated that the copolymers possess protonated thiazole nitrogen atoms, meso/macroporous structure, and solubility in tetrahydrofuran and chloroform. Moreover, the improved electronic properties of poly(S-MVT) relative to elemental sulfur have also been investigated by density functional theory (DFT) calculations. The copolymers are utilized successfully as the cathode active material in Li-S batteries. Upon employment, the copolymer with 15% MVT content provided good cycling stability at a capacity of ∼514 mA h g-1 (based on the mass of copolymer) and high Coulombic efficiencies (∼100%) over 100 cycles, as well as great rate performance.

Hydrogen-bonded silicene nanosheets of engineered bandgap and selective degradability for photodynamic therapy

Silicon, a highly biocompatible and ubiquitous chemical element in living systems, exhibits great potentials in biomedical applications. However, the silicon-based nanomaterials such as silica and porous silicon have been largely limited to only serving as carriers for delivery systems, due to the lack of intrinsic functionalities of silicon. This work presents the facile construction of a two-dimensional (2D) hydrogen-bonded silicene (H-silicene) nanosystem which is highlighted with tunable bandgap and selective degradability for tumor-specific photodynamic therapy facilely by surface covalent modification of hydrogen atoms. Briefly, the H-silicene nanosheet material is selectively degradable in normal neutral tissues but rather stable in the mildly acidic tumor microenvironment (TME) for achieving efficient photodynamic therapy (PDT). Such a 2D hydrogen-bonded silicene nanosystem featuring the tunable bandgap and tumor-selective degradability provides a new paradigm for the application of multi-functional two-dimensional silicon-based biomaterials towards the diagnosis and treatments of cancer and other diseases.

Metal-Free Catalysis: A Redox-Active Donor-Acceptor Conjugated Microporous Polymer for Selective Visible-Light-Driven CO2 Reduction to CH4

Achieving more than a two-electron photochemical CO₂ reduction process using a metal-free system is quite exciting and challenging, as it needs proper channeling of electrons. In the present study, we report the rational design and synthesis of a redox-active conjugated microporous polymer (CMP), TPA-PQ, by assimilating an electron donor, tris(4-ethynylphenyl)amine (TPA), with an acceptor, phenanthraquinone (PQ). The TPA-PQ shows intramolecular charge-transfer (ICT)-assisted catalytic activity for visible-light-driven photoreduction of CO₂ to CH₄ (yield = 32.2 mmol g^-1) with an impressive rate (2.15 mmol h^-1 g^-1) and high selectivity (>97%). Mechanistic analysis based on experimental results, in situ DRIFTS, and computational studies reveals that the potential of TPA-PQ for catalyzing photoreduction of CO₂ to CH₄ was energetically driven by photoactivated ICT upon surface adsorption of CO₂, wherein adjacent keto groups of PQ unit play a pivotal role. The critical role of ICT for stimulating photocatalysis is further illustrated by synthesizing another redox-active CMP (TEB-PQ), bearing triethynylbenzene (TEB) and PQ, that shows 8-fold lesser activity for photoreduction toward CO₂ to CH₄ (yield = 4.4 mmol g^-1) as compared to TPA-PQ. The results demonstrate a novel concept for CO₂ photoreduction to CH₄ using an efficient, sustainable, and recyclable metal-free robust organic photocatalyst.

Polyoxometalate Interlayered Zinc-Metallophthalocyanine Molecular Layer Sandwich as Photocoupled Electrocatalytic CO2 Reduction Catalyst

Developing efficient and robust heterogeneous metallophthalocyanine electrocatalysts for CO₂ reduction remains a challenge. Here, a general synthetic method of zinc-metallophthalocyanine (MPc) molecular layer/polyoxometalate (POM) sandwich lamellar material is developed, and thus improved performance of electrocatalytic and photocoupled electrocatalytic CO₂ reduction is achieved. The incorporation of POM could prevent the packing of MPc molecular layers from aggregation, which would be favorable to the exposure of active sites. The molecular layer sandwich catalyst presents superior CO₂ reduction activity, delivering the highest CO Faradaic efficiency (FE_CO) of 96.1% at -0.7 V vs RHE in dark field. Under light irradiation, over 93% FE_CO is achieved in a broad potential range from -0.6 to -0.9 V vs RHE with a maximum of 96.2%, and the carbon monoxide turnover frequency could exceed 2060 h^-1. Photoelectrochemical tests and luminescence characterizations reveal the molecular layer is beneficial for carrier separation during light irradiation; density functional theory calculations and electron paramagnetic resonance indicated a 2-fold enhancement of the external light field on the catalytic performance.

Roles of Graphene Oxide in Heterogeneous Photocatalysis

Graphene oxide (GO) has been widely utilized as the precursor of graphene (GR) to fabricate GR-based hybrid photocatalysts for solar-to-chemical energy conversion. However, until now, the properties and roles that GO played in heterogeneous photocatalysis have remained relatively elusive. In this Review, we start with a brief discussion of synthesis and structure of GO. Then, the photocatalysis-related properties of GO, including electrical conductivity, surface chemistry, dispersibility, and semiconductor properties, are concisely summarized. In particular, we have highlighted the fundamental multifaceted roles of GO in heterogeneous photocatalysis, which contain the precursor of GR, cross-linked framework for constructing aerogel photocatalyst, macromolecular surfactant, two-dimensional growth template, and photocatalyst by itself. Furthermore, the future prospects and remaining challenges on developing effective GO-derived hybrid photocatalysts are presented, which is expected to inspire further research into this promising research domain.

Few-Layer ZnIn2S4/Laponite Heterostructures: Role of Mg2+ Leaching in Zn Defect Formation

Designing nanostructures with extended light absorption via defect engineering is a useful approach for the synthesis of efficient photocatalysts. Herein, ZnIn₂S₄ was grown hydrothermally in the modified interlayer space of Laponite, resulting in lamellae consisting of Zn-defective ZnIn₂S₄ several unit cells thick. In the process it was found that Mg²⁺ leached from Laponite during synthesis led to the formation of Zn defects in ZnIn₂S₄. This resulted in nanohybrids with light absorption extended across the visible spectrum and in improved charge transfer due to the layered structure formed via confined growth. Compared with pure ZnIn₂S₄, Zn-defective ZnIn₂S₄-Laponite hybrids have increased photocurrent generation and photocatalytic performance. The leaching of Mg²⁺ and the resulting formation of Zn defects was attenuated by addition of 4 mM Mg²⁺ to the reaction, due to a combination of shifting of the equilibrium of Mg²⁺ leaching toward stability, and increased ionic strength. In summary, this work demonstrates the growth of ∼1 nm thick lamellae of ZnIn₂S₄, presents a unique strategy to generate cation defects in nanomaterials and the mechanism behind it, and also provides an approach to mitigate Mg²⁺ leaching in such syntheses.

Effect mechanism of copper ions on photocatalytic activity of TiO2/graphene oxide composites for phenol-4-sulfonic acid photodegradation

Organic pollutants in electroplating wastewater can be removed by photodegradation, however the effect mechanism of heavy metal ions on photocatalytic activity still remains unknown. Herein, we firstly reported the self-assembly synthesis of titanium dioxide/reduced graphene oxide (TiO₂/rGO) composites for phenol-4-sulfonic acid (PSA) removal, and investigated the effects of Cu²⁺ ions on photocatalytic efficiency. During the self-assemble process, rGO nanosheets were connected together to form network macropores, and simultaneously induced the deposition of hierarchically nanostructured TiO₂ microspheres. The synergetic effects of TiO₂ microspheres and rGO nanosheets improved the photocatalytic activity by enhancing light adsorption ability, stabilizing electron-hole separation and decreasing band gap energy. The Cu²⁺ ions in wastewater showed positive and negative effects on PSA photodegradation. In the photocatalytic reaction, the electron-induced reduction reaction of Cu(II) into Cu(0) or Cu(I) took place, which inhibited electron-hole recombination and thus enhanced photocatalytic activity. However, the high chemical stability of PSA-Cu(II) complex compounds held back PSA photodegradation. The appropriate concentrations of Cu²⁺ ions at around 25 mg/L accelerated PSA photodegradation over TiO₂/rGO composites. The PSA degradation into CO₂ and H₂O was performed by using hydroquinone, benzoquinone and maleic acid as degradation intermediates. Hence, TiO₂/rGO composites are novel multifunctional photocatalysts to purify electroplating wastewater.

In Situ Synthesis of Lead-Free Halide Perovskite Cs2AgBiBr6 Supported on Nitrogen-Doped Carbon for Efficient Hydrogen Evolution in Aqueous HBr Solution

Lead halide perovskites have shown great potential in photovoltaic and photocatalytic fields. However, the toxicity of lead impedes their wide application. Herein composites of lead-free halide perovskite Cs₂AgBiBr₆ supported on nitrogen-doped carbon (N-C) materials were synthesized successfully through a facile one-pot method for the first time. Without deposition of noble metals as the cocatalyst, the optimal composite Cs₂AgBiBr₆/N-C (Cs₂AgBiBr₆/N-C-140) exhibits outstanding photocatalytic performance with a high hydrogen evolution rate of 380 μmol g^-1 h^-1 under visible light irradiation (λ ≥ 420 nm), which is about 19 times faster than that of pure Cs₂AgBiBr₆ and 4 times faster than that of physically mixed Cs₂AgBiBr₆/N-C-140, respectively. The Cs₂AgBiBr₆/N-C-140 composite also displays high stability with no significant decrease after six cycles of repeated hydrogen evolution experiments. The addition of N-C with a high surface area helps to prevent aggregation of Cs₂AgBiBr₆ NPs and provides more pathways for the migration of photoinduced carriers. The nitrogen dopant can facilitate photoinduced electron transfer from Cs₂AgBiBr₆ to N-C to result in spatially separated electrons and holes with prolonged electron time and greatly enhance the photocatalytic performance. This study indicates that Cs₂AgBiBr₆-based perovskite materials are promising candidates for photocatalytic hydrogen evolution.

2D Nanomaterials for Effective Energy Scavenging

The development of a nation is deeply related to its energy consumption. 2D nanomaterials have become a spotlight for energy harvesting applications from the small-scale of low-power electronics to a large-scale for industry-level applications, such as self-powered sensor devices, environmental monitoring, and large-scale power generation. Scientists from around the world are working to utilize their engrossing properties to overcome the challenges in material selection and fabrication technologies for compact energy scavenging devices to replace batteries and traditional power sources. In this review, the variety of techniques for scavenging energies from sustainable sources such as solar, air, waste heat, and surrounding mechanical forces are discussed that exploit the fascinating properties of 2D nanomaterials. In addition, practical applications of these fabricated power generating devices and their performance as an alternative to conventional power supplies are discussed with the future pertinence to solve the energy problems in various fields and applications.

Two-Dimensional GeTe: Air Stability and Photocatalytic Performance for Hydrogen Evolution

As a key method to convert solar into chemical energy, photocatalytic water decomposition has garnered attention. Moreover, the development of graphene and graphene-like two-dimensional (2D) materials has brought fresh vitality in the field of photocatalysis. Here, we prepared two to four layers of GeTe nanosheets by ultrasonic-assisted liquid-phase exfoliation in argon and air, which we referred to as Ar-GeTe and O-GeTe, respectively. The photocatalytic hydrogen production potential of 2D GeTe was experimentally investigated for the first time. The results indicated that minimally layered GeTe samples are indirect-gap semiconductors with the GeTe band gap increasing after oxidation. All samples have suitable band positions that can drive photocatalytic water splitting into H₂ under mild conditions, providing maximum hydrogen evolution rates of 1.13 mmol g^-1 h^-1 (Ar-GeTe) and 0.54 mmol g^-1 h^-1 (O-GeTe). With density functional theory computations, the structural stability of GeTe in air was discussed, revealing that oxygen atoms could easily combine with Ge to form a more stable structure, thus impacting the photocatalytic performance of 2D GeTe. Therefore, the light requirement and oxygen deficiency of the material give an advantage in the field of energy supply in space.

Effect of the geometry of precursor crucibles on the growth of MoS2 flakes by chemical vapor deposition

Chemical vapor deposition (CVD) employing a furnace with multiple temperature zones is still the best and most widely used method for preparing high-quality MoS₂ flakes.