Hot carriers perspective on the nature of traps in perovskites

Unraveling the excitonics of light emission from metal-halide perovskite quantum dots

Metal halide semicondictor perovskites have been under intense investigation for their promise in light absorptive applications like photovoltaics. They have more recently experienced interest for their promise in light emissive applications. A key aspect of perovskites is their glassy, ionic lattice that exhibits dynamical disorder. One possible result of this dynamical disorder is their strong coupling between electronic and lattice degrees of freedom which may confer remarkable properties for light emission such as defect tolerance. How does the system, comprised of excitons, couple to the bath, comprised of lattice modes? How does this system-bath interaction give rise to novel light emissive properties and how do these properties give insight into the nature of these materials? We review recent work from this group in which time-resolved photoluminescence spectroscopy is used to reveal such insights. Based upon a fast time resolution of 3 ps, energy resolution, and temperature dependence, a wide variety of insights are gleaned. These insights include: lattice contributions to the emission linewidths, multiexciton formation, hot carrier cooling, excitonic fine structure, single dot superradiance, and a breakdown of the Condon approximation, all due to complex structural dynamics in these materials.

Strongly-confined colloidal lead-halide perovskite quantum dots: from synthesis to applications

Colloidal semiconductor nanocrystals enable the realization and exploitation of quantum phenomena in a controlled manner, and can be scaled up for commercial uses. These materials have become important for a wide range of applications, from ultrahigh definition displays, to solar cells, quantum computing, bioimaging, optical communications, and many more. Over the last decade, lead-halide perovskite nanocrystals have rapidly gained prominence as efficient semiconductors. Although the majority of studies have focused on large nanocrystals in the weak- to intermediate-confinement regime, quantum dots (QDs) in the strongly-confined regime (with sizes smaller than the Bohr diameter, which ranges from 4-12 nm for lead-halide perovskites) offer unique opportunities, including polarized light emission and color-pure, stable luminescence in the region that is unattainable by perovskites with single-halide compositions. In this tutorial review, we bring together the latest insights into this emerging and rapidly growing area, focusing on the synthesis, steady-state optical properties (including exciton fine-structure splitting), and transient kinetics (including hot carrier cooling) of strongly-confined perovskite QDs. We also discuss recent advances in their applications, including single photon emission for quantum technologies, as well as light-emitting diodes. We finish with our perspectives on future challenges and opportunities for strongly-confined QDs, particularly around improving the control over monodispersity and stability, important fundamental questions on the photophysics, and paths forward to improve the performance of perovskite QDs in light-emitting diodes.

Chirality of CsPbBr3 Nanocrystals with Varying Dimensions in the Presence of Chiral Molecules

Chiral lead halide perovskite (LHP) nanocrystals (NCs) have been attracting considerable interest for circularly polarized luminescence (CPL)-based optoelectronic applications. This study combined experimental and computational analyses to investigate how the dimensionality of 3D (cubic) to 0D (quantum dots) influences the tunable chiral emission of CsPbBr3 LHP NCs. The circular dichroism (CD) spectra have a significant blue shift from 508 to 406 nm. The dissymmetry factors for CD (gCD) change from ±2.5 × 10-3 to ±7.5 × 10-3 as dimensionality varies from 3D to 0D in the presence of the chiral molecule (cyclohexylethylamine, CHEA). A significant luminescence dissymmetry factor (glum) of ±5.6 × 10-4 is observed in the 0D CsPbBr3 NCs. Theoretical calculations using structural distortion parameters, the extent of charge transfer, and electrostatic potential profiles have revealed that the most significant enhancement of the chirality transfer occurs from the CHEA molecules to 0D NCs, and the order of chirality transfer from CHEA to CsPbBr3 NCs is 0D (quantum dots) > 2D (nanoplatelet) > 3D (cubic).

Ecofriendly Solution Processing of Perovskite Solar Cells Using Water

Perovskite solar cells (PSCs) represent a promising avenue for producing cost-effective solar energy by harnessing sunlight, but challenges persist in their solution processing, which uses a large amount of organic solvent for existing PSC technology. The use of water as a solvent offers an environmentally friendly alternative to traditional solvents, aligning with the global drive for sustainable renewable energy technologies. This Perspective provides an overview of research in the area of PSC fabrication using water as a solvent, highlighting key advancements in the synthesis process. We delve into the kinetics of crystallization and the physical-chemical transformations of perovskite materials in water-based solution processing. Key challenges of the scalability of water-based solution processing for PSC fabrication are discussed. The Perspective sheds light on the broader potential for enhancing the ecofriendliness of perovskite solar cell technologies.

Hot Carrier Trapping and It's Influence to the Carrier Diffusion in CsPbBr3 Perovskite Film Revealed by Transient Absorption Microscopy

The defects in perovskite film can cause charge carrier trapping which shortens carrier lifetime and diffusion length. So defects passivation has become promising for the perovskite studies. However, how defects disturb the carrier transport and how the passivating affects the carrier transport in CsPbBr3 are still unclear. Here the carrier dynamics and diffusion processes of CsPbBr3 and LiBr passivated CsPbBr3 films are investigated by using transient absorption spectroscopy and transient absorption microscopy. It's found that there is a fast hot carrier trapping process with the above bandgap excitation, and the hot carrier trapping would decrease the population of cold carriers which are diffusible, then lower the carrier diffusion constant. It's proved that LiBr can passivate the defect and lower the trapping probability of hot carriers, thus improve the carrier diffusion rate. The finding demonstrates the influence of hot carrier trapping to the carrier diffusion in CsPbBr3 film.

Red-Emitting CsPbI3/ZnSe Colloidal Nanoheterostructures with Enhanced Optical Properties and Stability

Producing heterostructures of cesium lead halide perovskites and metal-chalcogenides in the form of colloidal nanocrystals can improve their optical features and stability, and also govern the recombination of charge carriers. Herein, the synthesis of red-emitting CsPbI3/ZnSe nanoheterostructures is reported via an in situ hot injection method, which provides the crystallization conditions for both components, subsequently leading to heteroepitaxial growth. Steady-state absorption and photoluminescence studies alongside X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy analysis evidence on a type-I band alignment for CsPbI3/ZnSe nanoheterostructures, which exhibit photoluminescence quantum yield of 96% due to the effective passivation of surface defects, and an enhancement in carrier lifetime. Furthermore, the heterostructure growth of ZnSe domains leads to significant improvement in the stability of the CsPbI3 nanocrystals under ambient conditions and against thermal and UV irradiation stress.

Charge Trapping in Semiconductor Photocatalysts: A Time- and Space-Domain Perspective

Harnessing solar energy to produce value-added fuels and chemicals through photocatalysis techniques holds promise for establishing a sustainable and environmentally friendly energy economy. The intricate dynamics of photogenerated charge carriers lies at the core of the photocatalysis. The balance between charge trapping and band-edge recombination has a crucial influence on the activity of semiconductor photocatalysts. Consequently, the regulation of traps in photocatalysts becomes the key to optimizing their activities. Nevertheless, our comprehension of charge trapping, compared to that of well-studied charge recombination, remains somewhat limited. This limitation stems from the inherently heterogeneous nature of traps at both temporal and spatial scales, which renders the characterization of charge trapping a formidable challenge. Fortunately, recent advancements in both time-resolved spectroscopy and space-resolved microscopy have paved the way for considerable progress in the investigation and manipulation of charge trapping. In this Perspective, we focus on charge trapping in photocatalysts with the aim of establishing a direct link to their photocatalytic activities. To achieve this, we begin by elucidating the principles of advanced time-resolved spectroscopic techniques such as femtosecond time-resolved transient absorption spectroscopy and space-resolved microscopic methods, such as single-molecule fluorescence microscopy and surface photovoltage microscopy. Additionally, we provide an overview of noteworthy research endeavors dedicated to probing charge trapping using time- and space-resolved techniques. Our attention is then directed toward recent achievements in the manipulation of charge trapping in photocatalysts through defect engineering. Finally, we summarize this Perspective and discuss the future challenges and opportunities that lie ahead in the field.

Making and Breaking of Exciton Cooling Bottlenecks in Halide Perovskite Nanocrystals

Harnessing quantum confinement (QC) effects in semiconductors to retard hot carrier cooling (HCC) is an attractive approach for enabling efficient hot carrier extraction to overcome the Shockley-Queisser limit. However, there is a debate about whether halide perovskite nanocrystals (PNCs) can effectively exploit these effects. To address this, we utilized pump-probe and multipulse pump-push-probe spectroscopy to investigate HCC behavior in PNCs of varying sizes and cation compositions. Our results validate the presence of an intrinsic phonon bottleneck with clear manifestations of QC effects in small CsPbBr3 PNCs exhibiting slower HCC rates compared to those of larger PNCs. However, the replacement of inorganic Cs+ with organic cations suppresses this intrinsic bottleneck. Furthermore, PNCs exhibit distinct size-dependent HCC behavior in response to changes in the cold carrier densities. We attribute this to the enhanced exciton-exciton interactions in strongly confined PNCs that facilitate Auger heating. Importantly, our findings dispel the existing controversy and provide valuable insights into design principles for engineering QC effects in PNC hot carrier applications.

Hot Excitons Cool in Metal Halide Perovskite Nanocrystals as Fast as CdSe Nanocrystals

The idea of phonon bottlenecks has long been pursued in nanoscale materials for their application in hot exciton devices, such as photovoltaics. Decades ago, it was shown that there is no quantum phonon bottleneck in strongly confined quantum dots due to their physics of quantum confinement. More recently, it was proposed that there are hot phonon bottlenecks in metal halide perovskites due to their physics. Recent work has called into question these bottlenecks in metal halide perovskites. Here, we compare hot exciton cooling in a range of sizes of CsPbBr3 nanocrystals from weakly to strongly confined. These results are compared to strongly confined CdSe quantum dots of two sizes and degrees of quantum confinement. CdSe is a model system as a ruler for measuring hot exciton cooling being fast, by virtue of its efficient Auger-assisted processes. By virtue of 3 ps time resolution, the hot exciton photoluminescence can now be directly observed, which is the most direct measure of the presence of hot excitons and their lifetimes. The hot exciton photoluminescence decays on nearly the same 2 ps time scale on both the weakly confined perovskite and the larger CdSe quantum dots, much faster than the 10 ps cooling predicted by transient absorption experiments. The smaller CdSe quantum dot has still faster cooling, as expected from quantum size effects. The quantum dots of perovskites show extremely fast hot exciton cooling, decaying faster than detection limits of <1 ps, even faster than the CdSe system, suggesting the efficiency of Auger processes in these metal halide perovskite nanocrystals and especially in their quantum dot form. These results across a range of sizes of nanocrystals reveal extremely fast hot exciton cooling at high exciton density, independent of composition, but dependent upon size. Hence these metal halide perovskite nanocrystals seem to cool heavily following quantum dot physics.

Revamping Triboelectric Output by Deep Trap Construction

High output performance is critical for building triboelectric nanogenerators (TENGs) for future multifunctional applications. Unfortunately, the high triboelectric charge dissipation rate has a significant negative impact on its electrical output performance. Herein, a new tribolayer is designed through introducing self-assembled molecules with large energy gaps on commercial PET fibric to form carrier deep traps, which improve charge retention while decreasing dissipation rates. The deep trap density of the PET increases by two orders of magnitude, resulting in an 86% reduction in the rate of charge dissipation and a significant increase in the charge density that can be accumulated on tribolayer during physical contact. The key explanation is that increasing the density of deep traps improves the dielectric's ability to store charges, making it more difficult for the triboelectric charges trapped by the tribolayer to escape from the deep traps, lowering the rate of charge dissipation. This TENG has a 1300% increase in output power density as a result of altering the deep trap density, demonstrating a significant improvement. This work describes a simple yet efficient method for building TENGs with ultra-high electrical output and promotes their practical implementation in the sphere of the Internet of Things.

Manipulation of hot-carrier cooling dynamics in CsPbBr3 quantum dots via site-selective ligand engineering

Prolonging the lifetime of photoinduced hot carriers in lead-halide perovskite quantum dots (QDs) is highly desirable because it can help improve the photovoltaic conversion efficiency. Ligand engineering has recently become a promising strategy to achieve this; nevertheless, mechanistic studies in this field remain limited. Herein, we propose a new scenario of ligand engineering featuring Pb2+/Br- site-selective capping on the surface of CsPbBr3 QDs. Through joint observations of temperature-dependent photoluminescence, ultrafast transient absorption, and Raman spectroscopy of the two contrasting model systems of CsPbBr3 QDs (i.e., capping with organic ligand only vs hybrid organic/inorganic ligands), we reveal that the phononic regulation of Pb-Br stretching at the Br-site (relative to Pb-site) leads to a larger suppression of charge-phonon coupling due to a stronger polaronic screening effect, thereby more effectively retarding the hot-carrier cooling process. This work opens a new route for the manipulation of hot-carrier cooling dynamics in perovskite systems via site-selective ligand engineering.

Understanding the Trap Characteristics of Perovskite Solar Cells via Drive-Level Capacitance Profiling

Perovskite solar cells (PSCs) are gaining significant interest as the future of photovoltaics owing to their superior performance and cost-effectiveness. Nevertheless, traps in PSCs have emerged as issues that adversely affect the efficiency and stability of the devices. In this study, the methylammonium chloride (MACl) additive and phenyltrimethylammonium iodide (PTMAI) posttreatment were applied to passivate bulk and surface defects. Furthermore, variations of the traps' quantitative spatial arrangement have been monitored by using the drive-level capacitance profiling (DLCP) analysis. A similar magnitude of trap reduction was observed for the bulk perovskite layer and two interfaces (electron transport layer (ETL)/perovskite and hole transport layer (HTL)/perovskite) with an optimal concentration of the MACl additive. However, the effect of perovskite posttreatment in reducing the trap density was much more noticeable at the HTL/perovskite interface compared to the bulk and ETL/perovskite regions. This observation was reinforced by the outcomes of the 500 h thermal stability tests at 60 °C from seven independent batches, which demonstrated a substantial suppression of trap accumulation, particularly at the HTL/perovskite interface, by an order of magnitude.

Impacts of Exciton Binding Energy and Dielectric Confinement of Layered Lead Halide Perovskites on Carrier Relaxation and Exciton Phonon Interactions

This work highlights the significance of dielectric confinements and exciton binding energy of hybrid layered perovskites (LPs) in controlling the carrier relaxation dynamics of LPs for designing efficient optoelectronic devices. The polarizability of organic spacer cations in LPs modulates the carrier-phonon and carrier-carrier interactions, which eventually control the carrier relaxation dynamics. Here, we have varied the alkyl-ammonium chain length in the LPs to change the dielectric confinement, and the first-principles calculations reveal that the long-chain organic spacer experiences stronger dielectric confinement in comparison to short-chain organic spacer cation-based LPs. Transient absorption spectroscopic analysis suggests that the larger dielectric confinement and higher exciton binding energy exhibit faster carrier relaxation dynamics. The enhanced exciton-phonon interaction leads to faster carrier relaxation dynamics. The much softer phonon modes are responsible for the higher up-conversion of acoustic modes to optical modes, which leads to slower carrier relaxation dynamics in n-butylamine (BA) based LPs.

Alloying metal cations in perovskite nanocrystals is a new route to controlling hot carrier cooling

Hot carrier cooling is slowed down upon alloying tin in lead-halide perovskite nanocrystals through the engineering of carrier-phonon and carrier-defect interactions.

Exciton-polaron interactions in metal halide perovskite nanocrystals revealed via two-dimensional electronic spectroscopy

Metal halide perovskite nanocrystals have been under intense investigation for their promise in optoelectronic devices due to their remarkable physics, such as liquid/solid duality. This liquid/solid duality may give rise to their defect tolerance and other such useful properties. This duality means that the electronic states are fluctuating in time, on a distribution of timescales from femtoseconds to picoseconds. Hence, these lattice induced energy fluctuations that are connected to polaron formation are also connected to exciton formation and dynamics. We observe these correlations and dynamics in metal halide perovskite nanocrystals of CsPbI3 and CsPbBr3 using two-dimensional electronic (2DE) spectroscopy, with its unique ability to resolve dynamics in heterogeneously broadened systems. The 2DE spectra immediately reveal a previously unobserved excitonic splitting in these 15 nm NCs that may have a coarse excitonic structure. 2D lineshape dynamics reveal a glassy response on the 300 fs timescale due to polaron formation. The lighter Br system shows larger amplitude and faster timescale fluctuations that give rise to dynamic line broadening. The 2DE signals enable 1D transient absorption analysis of exciton cooling dynamics. Exciton cooling within this doublet is shown to take place on a slower timescale than within the excitonic continuum. The energy dissipation rates are the same for the I and Br systems for incoherent exciton cooling but are very different for the coherent dynamics that give rise to line broadening. Exciton cooling is shown to take place on the same timescale as polaron formation, revealing both as coupled many-body excitation.

Regulating Exciton De-Trapping of Te4+ -Doped Zero-Dimensional Scandium-Halide Perovskite for Fluorescence Thermometry with Record High Time-Resolved Thermal Sensitivity

Fluorescence thermometry has been propelled to the forefront of scientific attention due to its high spatial resolution and remote non-invasive detection. However, recent generations of thermometers still suffer from limited thermal sensitivity (Sr ) below 10% change per Kelvin. Herein, this work presents an ideal temperature-responsive fluorescence material through Te4+ -doped 0D Cs2 ScCl5 ·H2 O, in which isolated polyhedrons endow highly localized electronic structures, and the strong electron-phonon coupling facilitates the formation of self-trapped excitons (STEs). With rising temperature, the dramatic asymmetric expansion of the soft lattice induces increased defects, strong exciton-phonon coupling, and low thermal activation energy, which evokes a rapid de-trapping process of STEs, enabling several orders of magnitude changes in the fluorescence lifetime over a narrow temperature range. After regulating the de-trapping process with different Te4+ doping, a record-high Sr (27.36% K-1 ) of fluorescence lifetime-based detection is achieved at 325 K. The robust stability against multiple heating/cooling cycles and long-term measurements enables a low temperature uncertainty of 0.067 K. Further, the developed thermometers are demonstrated for the remote local monitoring of operating temperature on internal electronic components. It is believed that this work constitutes a solid step towards building the next generation of ultrasensitive thermometers based on low-dimensional metal halides.

Carrier multiplication in perovskite solar cells with internal quantum efficiency exceeding 100

Carrier multiplication (CM) holds great promise to break the Shockley-Queisser limit of single junction photovoltaic cells. Despite compelling spectroscopic evidence of strong CM effects in halide perovskites, studies in actual perovskite solar cells (PSCs) are lacking. Herein, we reconcile this knowledge gap using the testbed Cs0.05FA0.5MA0.45Pb0.5Sn0.5I3 system exhibiting efficient CM with a low threshold of 2Eg (~500 nm) and high efficiency of 99.4 ± 0.4%. Robust CM enables an unbiased internal quantum efficiency exceeding 110% and reaching as high as 160% in the best devices. Importantly, our findings inject fresh insights into the complex interplay of various factors (optical and parasitic absorption losses, charge recombination and extraction losses, etc.) undermining CM contributions to the overall performance. Surprisingly, CM effects may already exist in mixed Pb-Sn PSCs but are repressed by its present architecture. A comprehensive redesign of the existing device configuration is needed to leverage CM effects for next-generation PSCs.

Tailoring Interlayer Charge Transfer Dynamics in 2D Perovskites with Electroactive Spacer Molecules

The family of hybrid organic-inorganic lead-halide perovskites are the subject of intense interest for optoelectronic applications, from light-emitting diodes to photovoltaics to X-ray detectors. Due to the inert nature of most organic molecules, the inorganic sublattice generally dominates the electronic structure and therefore the optoelectronic properties of perovskites. Here, we use optically and electronically active carbazole-based Cz-Ci molecules, where Ci indicates an alkylammonium chain and i indicates the number of CH2 units in the chain, varying from 3 to 5, as cations in the two-dimensional (2D) perovskite structure. By investigating the photophysics and charge transport characteristics of (Cz-Ci)2PbI4, we demonstrate a tunable electronic coupling between the inorganic lead-halide and organic layers. The strongest interlayer electronic coupling was found for (Cz-C3)2PbI4, where photothermal deflection spectroscopy results remarkably reveal an organic-inorganic charge transfer state. Ultrafast transient absorption spectroscopy measurements demonstrate ultrafast hole transfer from the photoexcited lead-halide layer to the Cz-Ci molecules, the efficiency of which increases by varying the chain length from i = 5 to i = 3. The charge transfer results in long-lived carriers (10-100 ns) and quenched emission, in stark contrast to the fast (sub-ns) and efficient radiative decay of bound excitons in the more conventional 2D perovskite (PEA)2PbI4, in which phenylethylammonium (PEA) acts as an inert spacer. Electrical charge transport measurements further support enhanced interlayer coupling, showing increased out-of-plane carrier mobility from i = 5 to i = 3. This study paves the way for the rational design of 2D perovskites with combined inorganic-organic electronic properties through the wide range of functionalities available in the world of organics.

Thermalization and relaxation mediated by phonon management in tin-lead perovskites

Understanding and control of ultrafast non-equilibrium processes in semiconductors is key to making use of the full photon energy before relaxation, leading to new ways to break efficiency limits for solar energy conversion. In this work, we demonstrate the observation and modulation of slow relaxation in uniformly mixed tin-lead perovskites (MASnxPb1-xI3 and CsSnxPb1-xI3 nanocrystals). Transient absorption measurements reveal that slow cooling mediated by a hot phonon bottleneck effect appears at carrier densities above ~1018 cm-3 for tin-lead alloy nanocrystals, and tin addition is found to give rise to suppressed cooling. Within the alloy nanoparticles, the combination of a newly introduced high-energy band, screened Fröhlich interaction, suppressed Klemens decay and reduced thermal conductivity (acoustic phonon transport) with increased tin content contributes to the slowed relaxation. For inorganic nanocrystals where defect states couple strongly with carriers, sodium doping has been confirmed to benefit in maintaining hot carriers by decoupling them from deep defects, leading to a decreased energy-loss rate during thermalization and an enhanced hot phonon bottleneck effect. The slow cooling we observe uncovers the intrinsic photophysics of perovskite nanocrystals, with implications for photovoltaic applications where suppressed cooling could lead to hot-carrier solar cells.

Controllably modulated asymmetrical photoresponse with a nonvolatile memory effect in a single CH3NH3PbI3 micro/nanowire for photorectifiers and photomemory

Nanostructured hybrid organic-inorganic perovskites exhibit remarkable photodetection performance due to their abundant surface states and high responsivity to visible light. However, in traditional photodetectors with a symmetrical configuration of two-terminal electrodes, the photoresponse is independent of bias polarity. Moreover, for self-powered photodetectors, an asymmetric structure of the chemical composition, such as p-n and Schottky junctions, and two different electrodes are necessary. Herein, we demonstrate a modulable asymmetrical photoresponse by packing only one electrode end in a single CH3NH3PbI3 micro/nanowire with two symmetrical Ag electrodes. This not only enables the high performance of light- and bias-modulated multifunctional photorectifiers and self-powered photodetectors, but also allows controllable implementation of nonvolatile photomemory with a tunable spectral responsivity and range. At an unpacked electrode interface, trace moisture in the environment promotes a good bonding of Ag+ and I-, substantially decreasing the interface barrier. Conversely, at a packed electrode interface, abundant surface states can be well preserved, leading to a high interface barrier. Notably, under a large voltage and strong light, the redox of Ag/AgI at the unpacked electrode interface and the injection and ejection of holes at the packed electrode interface can be reversibly conducted by inverting the voltage polarity, enabling a controllable nonvolatile modulation. Therefore, by clarifying the actual origin of the photoelectrical response of CH3NH3PbI3 micro/nanowires at electrode interfaces, high-performance multifunctional photorectifiers and self-powered photodetectors based on asymmetrical interface photovoltaic effects with two symmetrical electrodes can be controllably realized. Furthermore, by precise cooperative modulation of two electrode interface states with a large voltage and strong illumination, nonvolatile photomemory with a tunable spectral responsivity and range can be implemented.

Carriers, Quasi-particles, and Collective Excitations in Halide Perovskites

Halide perovskites (HPs) are potential game-changing materials for a broad spectrum of optoelectronic applications ranging from photovoltaics, light-emitting devices, lasers to radiation detectors, ferroelectrics, thermoelectrics, etc. Underpinning this spectacular expansion is their fascinating photophysics involving a complex interplay of carrier, lattice, and quasi-particle interactions spanning several temporal orders that give rise to their remarkable optical and electronic properties. Herein, we critically examine and distill their dynamical behavior, collective interactions, and underlying mechanisms in conjunction with the experimental approaches. This review aims to provide a unified photophysical picture fundamental to understanding the outstanding light-harvesting and light-emitting properties of HPs. The hotbed of carrier and quasi-particle interactions uncovered in HPs underscores the critical role of ultrafast spectroscopy and fundamental photophysics studies in advancing perovskite optoelectronics.

Confinement and Exciton Binding Energy Effects on Hot Carrier Cooling in Lead Halide Perovskite Nanomaterials

The relaxation of the above-gap ("hot") carriers in lead halide perovskites (LHPs) is important for applications in photovoltaics and offers insights into carrier-carrier and carrier-phonon interactions. However, the role of quantum confinement in the hot carrier dynamics of nanosystems is still disputed. Here, we devise a single approach, ultrafast pump-push-probe spectroscopy, to study carrier cooling in six different size-controlled LHP nanomaterials. In cuboidal nanocrystals, we observe only a weak size effect on the cooling dynamics. In contrast, two-dimensional systems show suppression of the hot phonon bottleneck effect common in bulk perovskites. The proposed kinetic model describes the intrinsic and density-dependent cooling times accurately in all studied perovskite systems using only carrier-carrier, carrier-phonon, and excitonic coupling constants. This highlights the impact of exciton formation on carrier cooling and promotes dimensional confinement as a tool for engineering carrier-phonon and carrier-carrier interactions in LHP optoelectronic materials.

Hot Carrier Cooling and Trapping in Atomically Thin WS2 Probed by Three-Pulse Femtosecond Spectroscopy

Transition metal dichalcogenides (TMDs) have shown outstanding semiconducting properties which make them promising materials for next-generation optoelectronic and electronic devices. These properties are imparted by fundamental carrier-carrier and carrier-phonon interactions that are foundational to hot carrier cooling. Recent transient absorption studies have reported ultrafast time scales for carrier cooling in TMDs that can be slowed at high excitation densities via a hot-phonon bottleneck (HPB) and discussed these findings in the light of optoelectronic applications. However, quantitative descriptions of the HPB in TMDs, including details of the electron-lattice coupling and how cooling is affected by the redistribution of energy between carriers, are still lacking. Here, we use femtosecond pump-push-probe spectroscopy as a single approach to systematically characterize the scattering of hot carriers with optical phonons, cold carriers, and defects in a benchmark TMD monolayer of polycrystalline WS₂. By controlling the interband pump and intraband push excitations, we observe, in real-time (i) an extremely rapid "intrinsic" cooling rate of ∼18 ± 2.7 eV/ps, which can be slowed with increasing hot carrier density, (ii) the deprecation of this HPB at elevated cold carrier densities, exposing a previously undisclosed role of the carrier-carrier interactions in mediating cooling, and (iii) the interception of high energy hot carriers on the subpicosecond time scale by lattice defects, which may account for the lower photoluminescence yield of TMDs when excited above band gap.

Probing the Genuine Carrier Dynamics of Semiconducting Perovskites under Sunlight

Understanding the nature of photogenerated carriers and their subsequent dynamics in semiconducting perovskites is important for the development of solar cell materials and devices. However, most ultrafast dynamic measurements on perovskite materials were conducted under high carrier densities, which likely obscures the genuine dynamics under low carrier densities in solar illumination conditions. In this study, we presented a detailed experimental study of the carrier density-dependent dynamics in hybrid lead iodide perovskites from femtosecond to microsecond using a highly sensitive transient absorption (TA) spectrometer. From the dynamic curves with low carrier density in the linear response range, we observed two fast trapping processes that occurred in less than 1 ps and tens of picoseconds, attributed to the shallow traps, and two slow decays with lifetimes of hundreds of nanoseconds and longer than 1 μs, related to the trap-assisted recombination and trapping at deep traps. Further TA measurements clearly show that PbCl₂ passivation can effectively reduce both shallow and deep trap densities. These results provide insights into the intrinsic photophysics of semiconducting perovskites with direct implications for photovoltaic and optoelectronic applications under sunlight.

A Wide Bandgap Halide Perovskite Based Self-Powered Blue Photodetector with 84.9% of External Quantum Efficiency

A self-powered, color-filter-free blue photodetector (PD) based on halide perovskites is reported. A high external quantum efficiency (EQE) of 84.9%, which is the highest reported EQE in blue PDs, is achieved by engineering the A-site monovalent cations of wide-bandgap perovskites. The optimized composition of formamidinium (FA)/methylammonium (MA) increases the heat of formation, yielding a uniform and smooth film. The incorporation of Cs⁺ ions into the FA/MA composition suppresses the trap density and increases charge-carrier mobility, yielding the highest average EQE of 77.4%, responsivity of 0.280 A W^-1 , and detectivity of 5.08 × 10¹² Jones under blue light. Furthermore, Cs⁺ improves durability under repetitive operations and ambient atmosphere. The proposed device exhibits peak responsivity of 0.307 A W^-1 , which is higher than that of the commercial InGaN-based blue PD (0.289 A W^-1 ). This study will promote the development of next-generation image sensors with vertically stacked perovskite PDs.

The role of atmospheric conditions in the nonradiative recombination in individual CH3NH3PbI3 perovskite crystals

Organic-inorganic metal halide perovskites have been emerging as potential candidates for lightweight photovoltaic applications in space. However, fundamental physics concerning the effect of atmosphere on the radiative and nonradiative recombination in perovskites remains far from well understood. Here, we investigate the creation and annihilation of nonradiative recombination centers in individual CH₃NH₃PbI₃ perovskite crystals by controlling the atmospheric conditions. We find that the photoluminescence (PL) of individual perovskite crystals can be quenched upon exposure from air to vacuum, while the subsequent PL enhancement in air shows a pressure dependence. Further analysis attributes the PL decline in vacuum to the activation of nonradiative trap sites, which is likely due to the lattice distortion caused by the variation of local strain on perovskites. With a gradual increase of the air pressure, the light-assisted chemisorption of oxygen on perovskite will passivate these nonradiative trap sites while simultaneously restoring the lattice imperfection, leading to PL enhancement. The present findings suggest that placing the perovskite in an environment with moderate oxygen content can protect the material from photophysical losses that can be pronounced under inert conditions.

Control of Hot Carrier Cooling in Lead Halide Perovskites by Point Defects

Hot carriers (HCs) in lead halide perovskites are prone to rapidly relax at the band edge and waste plentiful photon energy, severely limiting their conversion efficiency as HC photovoltaic devices. Here, the HC cooling dynamics of MAPbI₃ perovskite with common vacancy point defects (e.g., MA_v⁺ and I_v^-) and an interstitial point defect (e.g., I_i^-) is elucidated, and the underlying physics is explicated using ab initio nonadiabatic molecular dynamics. Contrary to vacancy point defects, the interstitial point defect reduces the band degeneracy, decreases the HC -phonon interaction, weakens the nonadiabatic coupling, and ultimately slows down hot electron cooling by a factor of 1.5-2. Furthermore, the band-by-band relaxation pathway and direct relaxation pathway are uncovered for hot electron cooling and hot hole cooling, respectively, explaining why hot electrons can store more energy than hot holes during the cooling process. Besides, oxygen molecules interacting with I_i^- sharply accelerate the hot electron cooling, making it even faster than that of the pristine system and revealing the detrimental effect of oxygen on HC cooling. This work provides significant insights into the defect-dependent HC cooling dynamics and suggests a new strategy to design high-efficiency HC photovoltaic devices.

Modulating the Carrier Relaxation Dynamics in Heterovalently (Bi3+) Doped CsPbBr3 Nanocrystals

Manipulation of intrinsic carrier relaxation is crucial for designing efficient lead halide perovskite nanocrystal (NC) based optoelectronic devices. The influence of heterovalent Bi³⁺ doping on the ultrafast carrier dynamics and hot carrier (HC) cooling relaxation of CsPbBr₃ NCs has been studied using femtosecond transient absorption spectroscopy and first-principles calculations. The initial HC temperature and LO phonon decay time point to a faster HC relaxation rate in the Bi³⁺-doped CsPbBr₃ NCs. The first-principles calculations disclose the acceleration of carrier relaxation in Bi³⁺-doped CsPbBr₃ NCs due to the appearance of localized bands (antitrap states) within the conduction band. The higher Born effective charges (Z*) and higher soft energetic optical phonon density of states cause higher electron-phonon scattering rates in the Bi-doped CsPbBr₃ system, which is responsible for the faster HC cooling rate in doped systems.

Phonon-Mediated Slow Hot Carrier Dynamics in Lead-Free Cs3Bi2I9 Perovskite Single Crystal

In this report, we study the hot carrier cooling mechanism of the Cs3Bi2I9 single crystal by using femtosecond transient reflectance (fs-TR) spectroscopy. We find an unusual slow hot carrier cooling associated with longitudinal optical (LO) and coherent longitudinal acoustic phonons (CLAPs) emission during the deexcitation of the hot carriers. We posit the interplay between the hot-carriers and the LO and CLA phonons in subpicosecond to subnanosecond time scales, respectively, by analyzing the TR kinetics upon perturbation with excess energy. Furthermore, we measured the CLAPs propagation velocity in Cs3Bi2I9, the crystal, ranging from 1820 to 2000 ms-1. The elastic constants and frequency of Brillouin oscillations were estimated as 20.08 GPa and 14.66 GHz, respectively. Our discovery delivers new physical insights into how the hot carriers in Cs3Bi2I9 single crystal are coupled with a crystal lattice that controls the hot carrier dynamics.

Multipulse Terahertz Spectroscopy Unveils Hot Polaron Photoconductivity Dynamics in Metal-Halide Perovskites

Hot carriers in metal-halide perovskites (MHPs) present a foundation for understanding carrier-phonon coupling in the materials as well as the prospective development of high-performance hot carrier photovoltaics. While the carrier population dynamics during cooling have been scrutinized, the evolution of the hot carrier properties, namely mobility, remains largely unexplored. Here we introduce novel ultrafast visible pump-infrared push-terahertz probe spectroscopy to monitor the real-time conductivity dynamics of cooling carriers in methylammonium lead iodide. We find a decrease in mobility upon optically re-exciting the carriers, as expected for band transport. Surprisingly, the conductivity recovery is incommensurate with the hot carrier population dynamics measured by infrared probe and exhibits a negligible dependence on the hot carrier density. Our results reveal the importance of localized lattice heating toward the hot carrier mobility. This collective polaron-lattice phenomenon may contribute to the unusual photophysics of MHPs and should be accounted for in hot carrier devices.

Revealing Ultrafast Charge-Carrier Thermalization in Tin-Iodide Perovskites through Novel Pump-Push-Probe Terahertz Spectroscopy

Tin-iodide perovskites are an important group of semiconductors for photovoltaic applications, promising higher intrinsic charge-carrier mobilities and lower toxicity than their lead-based counterparts. Controllable tin vacancy formation and the ensuing hole doping provide interesting opportunities to investigate dynamic intraband transitions of charge carriers in these materials. Here, we present for the first time an experimental implementation of a novel Optical-Pump-IR-Push-THz-Probe spectroscopic technique and demonstrate its suitability to investigate the intraband relaxation dynamics of charge carriers brought into nonequilibrium by an infrared "push" pulse. We observe a push-induced decrease of terahertz conductivity for both chemically- and photodoped FA_0.83Cs_0.17SnI₃ thin films and show that these effects derive from stimulated THz emission. We use this technique to reveal that newly photogenerated charge carriers relax within the bands of FA_0.83Cs_0.17SnI₃ on a subpicosecond time scale when a large, already fully thermalized (cold) population of charge-carriers is present. Such rapid dissipation of the initial charge-carrier energy suggests that the propensity of tin halide perovskites toward unintentional self-doping resulting from tin vacancy formation makes these materials less suited to implementation in hot-carrier solar cells than their lead-based counterparts.

Ultrafast femtosecond pressure modulation of structure and exciton kinetics in 2D halide perovskites for enhanced light response and stability

The carriers’ transportation between layers of two-dimensional (2D) perovskites is inhibited by dielectric confinement. Here, for the first time, we employ a femtosecond laser to introduce ultrafast shock pressure in the range of 0~15.45 GPa to reduce dielectric confinement by modulating the structure and exciton dynamics in a perovskite single crystal (PSCs), e.g. (F-PEA)₂PbI₄ (4-fluorophenethylammonium, F-PEA). The density functional theory (DFT) simulation and experimental results show that the inorganic framework distortion results in a bandgap reduction. It was found that the exciton-optical phonon coupling and free excitons (FEs) binding energy are minimized at 2.75 GPa shock pressure due to a reduction in dielectric confinement. The stability testing under various harsh light and humid thermal conditions shows that femtosecond laser shocking improves the stability of (F-PEA)2PbI4 PSCs. Femtosecond laser shock processing provides a new approach for regulating the structure and enhancing halide perovskite properties.

Exciton in two-dimensional perovskite is strongly influenced by dielectric confinement of the organic components. Here, the authors employ femtosecond laser to induce ultrashock pressure to investigate how the structural changes and the reduction of dielectric confinement affects exciton behaviour and dynamic.

Non-toxic near-infrared light-emitting diodes

Harnessing cost-efficient printable semiconductor materials as near-infrared (NIR) emitters in light-emitting diodes (LEDs) is extremely attractive for sensing and diagnostics, telecommunications, and biomedical sciences. However, the most efficient NIR LEDs suitable for printable electronics rely on emissive materials containing precious transition metal ions (such as platinum), which have triggered concerns about their poor biocompatibility and sustainability. Here, we review and highlight the latest progress in NIR LEDs based on non-toxic and low-cost functional materials suitable for solution-processing deposition. Different approaches to achieve NIR emission from organic and hybrid materials are discussed, with particular focus on fluorescent and exciplex-forming host-guest systems, thermally activated delayed fluorescent molecules, aggregation-induced emission fluorophores, as well as lead-free perovskites. Alternative strategies leveraging photonic microcavity effects and surface plasmon resonances to enhance the emission of such materials in the NIR are also presented. Finally, an outlook for critical challenges and opportunities of non-toxic NIR LEDs is provided.

Inhomogeneous Trap-State-Mediated Ultrafast Photocarrier Dynamics in CsPbBr3 Microplates

Quantitatively elucidating photocarrier dynamics mediated by trap states in perovskites is crucial for establishing a structure-performance relation and understanding the interfacial photocarrier transport mechanism. Here, trap-state-mediated photocarrier dynamics in defect-rich CsPbBr₃ microplates are noninvasively investigated by ultrafast laser spectroscopy. Time-resolved photoluminescense (TRPL) measurements as a function of sample thickness indicate that trap densities of surface and bulk regions are inhomogeneous, leading to fast and slow decay components of TRPL, respectively. Fast and slow PL lifetimes present the same decreasing trend as the thickness is decreased from 5 to 0.1 μm, suggesting that both surface and bulk trap densities dramatically increase in sub-micrometer thick microplates. Furthermore, dynamical competition of ultrafast photocarrier energy relaxations between surface and bulk regions is studied in a 1.6 μm-thick sample by temporally correlating pump fluence-dependent TRPL with transient absorption signals. Strikingly, long-lived hot carriers (20 ps) are observed and complete filling of mid-gap trap states in the surface region can markedly enhance PL emission in the bulk region. By control measurements, we attribute these anomalous phenomena to the polaron-assisted ultrafast energy transfer process across the surface-bulk interface. Our results provide new insights into dynamical photocarrier energy relaxations and interfacial energy transport for inorganic perovskites.

Size-Dependent Hot Carrier Dynamics in Perovskite Nanocrystals Revealed by Two-Dimensional Electronic Spectroscopy

The lifetimes of hot carriers have been predicted to be prolonged in small nanocrystals with an inter-level spacing larger than phonon energy. Nevertheless, whether such a phonon bottleneck is present in perovskite semiconductor nanocrystals remains highly controversial. Here we report compelling evidence of a phonon bottleneck in CsPbI₃ nanocrystals with marked size-dependent relaxation of hot carriers by using broadband two-dimensional electronic spectroscopy (2DES). By combining high resolutions in both the time (<10 fs) and excitation energy domains, 2DES allows the clear disentanglement of the thermalization and cooling processes. The lifetime is over doubled for hot carriers when the average edge length of the nanocrystals decreases from 8.2 nm down to 4.6 nm. The confirmation of the phonon bottleneck effect suggests the feasibility of controlling hot carrier dynamics in perovskite semiconductors with nanocrystal size for potential applications of hot carrier devices.

Suppressing Auger Recombination in Cesium Lead Bromide Perovskite Nanocrystal Film for Bright Light-Emitting Diodes

All-inorganic cesium lead halide perovskite colloidal nanocrystals are attractive for next-generation light-emitting diodes because of their high color purity, but the nonradiative Auger recombination in perovskite nanocrystal film limits the efficiency and brightness of the fabricated devices. Here, we introduce a surface-engineering process to exchange the original long-chain oleic acid/oleylamine ligands by the cerium-tributylphosphine oxide hybrid ligands to suppress nonradiative Auger recombination in CsPbBr₃ NC film for bright and low-efficiency roll-off light-emitting diodes. Using ultrafast transient absorption and time-resolved photoluminescence spectroscopy, we demonstrate that the hybrid ligand passivation can efficiently remove surface trap states to enhance radiative recombination and homogenize the exciton concentration to suppress nonradiative Auger recombination in the CsPbBr₃ nanocrystal thin film. Consequently, we fabricate a light-emitting diode with efficient charge injection into the CsPbBr₃ nanocrystal emitting layer, achieving a pronounced improvement of electroluminescence with an external quantum efficiency from 5.5% to 9.1%. More importantly, the efficiency roll-off characteristics of high-brightness light-emitting diodes is effectively mitigated. Our reported hybrid ligand passivation suppressed Auger recombination strategy shows a great potential for fabricating high-brightness cesium lead halide perovskite light-emitting diodes.

Evolving Stark Effect During Growth of Perovskite Nanocrystals Measured Using Transient Absorption

Methylammonium lead triiodide (MAPbI3) nanocrystals (NCs) are emerging materials for a range of optoelectronic applications. Photophysical characterization is typically limited to structurally stable NCs owing to the long timescales required for many spectroscopies, preventing the accurate measurement of NCs during growth. This is a particular challenge for non-linear spectroscopies such as transient absorption. Here we report on the use of a novel single-shot transient absorption (SSTA) spectrometer to study MAPbI3 NCs as they grow. Comparing the transient spectra to derivatives of the linear absorbance reveals that photogenerated charge carriers become localized at surface trap states during NC growth, inducing a TA lineshape characteristic of the Stark effect. Observation of this Stark signal shows that the contribution of trapped carriers to the TA signal declines as growth continues, supporting a growth mechanism with increased surface ligation toward the end of NC growth. This work opens the door to the application of time-resolved spectroscopies to NCs in situ, during their synthesis, to provide greater insight into their growth mechanisms and the evolution of their photophysical properties.

Hot Carrier Cooling and Recombination Dynamics of Chlorine-Doped Hybrid Perovskite Single Crystals

Controlling the photoexcited properties and behavior of hybrid perovskites by halide doping has the potential to impact a wide range of emerging technologies, including solar cells and radiation detectors. Crystalline samples of methylammonium lead bromide substituted with chlorine (MAPbBr_3-xCl_x) were examined by transient reflectivity spectroscopy and nonadiabatic molecular dynamics simulations. At picosecond time scales, the addition of chlorine to the perovskite crystal increased the observed rate of hot carrier cooling and the calculated electron-phonon coupling constants. Chlorine-doped samples also exhibit a slower surface recombination velocity and a smaller ambipolar mobility.