Gradient tantalum-doped hematite homojunction photoanode improves both photocurrents and turn-on voltage for solar water splitting

Ultrathin layer TAFC on BiVO4 with ligand-to-metal charge transfer enhances built-in electric field for boosting photoelectrochemical water oxidation

To reveal the mechanism of charge transfer between interfaces of BiVO4-based heterogeneous materials in photoelectrochemical water splitting system, the cocatalyst was grown in situ using tannic acid (TA) as a ligand and Fe and Co ions as metal centers (TAFC), and then uniformly and ultra-thinly coated on BiVO4 to form photoanodes. The results show that the BiVO4/TAFC achieves a superior photocurrent density (4.97 mA cm-2 at 1.23 VRHE). The charge separation and charge injection efficiencies were also significantly higher, 82.0 % and 78.9 %, respectively. From XPS, UPS, KPFM, and density functional theory calculations, Ligand-to-metal charge transfer (LMCT) acts as an electron transport highway in TAFC ultrathin layer to promote the concentration of electrons towards metal center, leading to an increase in the work function, which enhances the built-in electric field and further improves the charge transport. This study demonstrated that the LMCT pathway on TA-metal complexes enhances the built-in electric field in BiVO4/TAFC to promote charge transport and thus enhance water oxidation, providing a new understanding of the performance improvement mechanism for the surface-modified composite photoanodes.

Anisotropic Dual S-Scheme Heterojunctions Mimic Natural Photosynthetic System for Boosting Photoelectric Response

The design of heterojunctions that mimic natural photosynthetic systems holds great promise for enhancing photoelectric response. However, the limited interfacial space charge layer (SCL) often fails to provide sufficient driving force for the directional migration of inner charge carriers. Drawing inspiration from the electron transport chain (ETC) in natural photosynthesis system, we developed a novel anisotropic dual S-scheme heterojunction artificial photosynthetic system composed of Bi2O3-BiOBr-AgI for the first time, with Bi2O3 and AgI selectively distributed along the bicrystal facets of BiOBr. Compared to traditional semiconductors, the anisotropic carrier migration in BiOBr overcomes the recombination resulting from thermodynamic diffusion, thereby establishing a potential ETC for the directional migration of inner charge carriers. Importantly, this pioneering bioinspired design overcomes the limitations imposed by the limited distribution of SCL in heterojunctions, resulting in a remarkable 55-fold enhancement in photoelectric performance. Leveraging the etching of thiols on Ag-based materials, this dual S-scheme heterojunction is further employed in the construction of photoelectrochemical sensors for the detection of acetylcholinesterase and organophosphorus pesticides.

Understanding the in-situ transformation of CuxO interlayers to increase the water splitting efficiency in NiO/n-Si photoanodes

The buried interface tens of nanometers beneath the solid-liquid junction is crucial for photocarrier extraction, influencing the overall efficiency of photoelectrochemical devices. Precise characterization of the interfacial properties is essential for device optimization but remains challenging. Here, we directly probe the in situ transformation of a CuxO interlayer at the NiO/n-Si interface by hard X-ray photoelectron spectroscopy. It is found that Cu(I) in the CuxO interlayer gradually transforms to Cu(II) with air exposure, forming an energetically more favorable interface and improving photoanode's efficiency. Based on this finding, a reactive e-beam evaporation process is developed for the direct deposition of a CuO interlayer, achieving a half-cell solar-to-hydrogen efficiency of 4.56% for the optimized NiO/CuO/n-Si heterojunction photoanode. Our results highlight the importance of precision characterization of interfacial properties with advanced hard X-ray photoelectron spectroscopy in guiding the design of efficient solar water-splitting devices.

The CuSCN layer between BiVO4 and NiFeOx for facilitating photogenerated carrier transfer and water oxidation kinetics

Modification of oxygen evolution co-catalyst (OEC) on the surface of bismuth vanadate (BiVO4) can effectively improve the kinetics of water oxidation, but it is still limited by the small hole extraction driving force at the BiVO4/OEC interface. Modulating the BiVO4/OEC interface with a hole transfer layer (HTL) is expected to facilitate hole transport from BiVO4 to the OEC surface. Herein, a copper(I) thiocyanate (CuSCN) HTL is inserted between BiVO4 and NiFeOx OEC to create BiVO4/CuSCN/NiFeOx photoanode, resulting in a significant enhancement of photoelectrochemical (PEC) water splitting performance. From electrochemical analyses and density functional theory (DFT) simulations, the markedly enhanced PEC performance is attributed to the insertion of CuSCN as an HTL, which promotes the extraction of holes from BiVO4 surface and boosts the water oxidation kinetics. The optimal photoanode achieves a photocurrent density of 5.6 mA cm-2 at 1.23 V versus the reversible hydrogen electrode (vs. RHE) and an impressive charge separation efficiency of 96.2 %. This work offers valuable insights into the development of advanced photoanodes for solar energy conversion and emphasizes the importance of selecting an appropriate HTL to mitigate recombination at the BiVO4/OEC interface.

Construction of N-doped carbon encapsulated Mn2O3/MnO heterojunction for enhanced lithium storage performance

Owing to high theoretical capacity, low cost and abundant availability, manganese oxides are widely viewed as promising anodes for lithium-ion batteries (LIBs). Nonetheless, their practical application is significantly hindered by poor electrical conductivity, sluggish reaction kinetics and substantial volume change. In this work, an ingenious polypyrrole encapsulation followed by pyrolysis strategy is proposed to produce N-doped carbon encapsulated Mn2O3/MnO heterojunction (Mn2O3/MnO@NC) by using mechanically ground Mn3O4/C3N4 mixture as the precursor. The results show that the selection of precursor plays a pivotal role in the successful preparation of Mn2O3/MnO@NC hybrid. It is revealed that the uniform encapsulation by N-doped carbon significantly enhances the conductivity and structural stability of the final product. Concurrently, the Mn2O3/MnO heterojunction within the resultant hybrid exhibits a unique quantum-dot size, which effectively shortens ion transport pathways and exposes the active sites for lithium storage. Additionally, experimental observations and theoretical calculations demonstrate that the built-in electric fields generated at the interfaces of Mn2O3/MnO heterojunction accelerate the charge transfer and ion diffusion, thereby enhancing the electrochemical reaction kinetics. As a result, the Mn2O3/MnO@NC hybrid displays much enhanced lithium storage performance. Evidently, our work offers a good guidance for the design and synthesis of advanced transition metal oxide/carbon anodes for LIBs.

Fluoride Ions Post-Treatment Regulates Interfacial Charge Separation and Transport to Promote Solar Water Splitting of Bismuth Vanadate

Herein, we propose a simple and effective fluoride (F-) ions post-treatment method to improve the solar water splitting performance of monoclinic BiVO4 (abbreviated as BVO). The surface modification of BVO with functional F- ions not only facilitates the transfer and separation efficiency of carriers at the electrode/electrolyte interface but also promotes the adsorption and activation of water, resulting in a photocurrent of 3.2 mA/cm2 at a bias voltage of 1.2 VRHE. Furthermore, the transfer and separation of carriers in the bulk and on the surface are further regulated by the oxygen vacancies induced by F- ions, thereby enhancing the PEC water splitting performance of BVO. Notably, the experimental findings demonstrate that the introduce of F- ions into the KBi electrolyte enhances the photo-charging process of BVO. Specifically, at a bias voltage of 0.6 VRHE, the BVO-0.12F sample exhibits a stable photocurrent of 1.2 mA/cm2, which is twice as high as that of the initial BVO sample. Remarkably, our study unveils that the addition of F- ions into the KBi electrolyte solution plays a pivotal role in facilitating the separation of charge carriers and promoting interfacial charge transport. Consequently, this further leads to a substantial enhancement in the solar water splitting performance for BVO-0.12F photoanode.

Unassisted Photoelectrochemical H2O2 Production with In Situ Glycerol Valorization Using α-Fe2O3

Photoelectrochemical (PEC) H2O2 production via two-electron O2 reduction is promising for H2O2 production without emitting CO2. For PEC H2O2 production, α-Fe2O3 is an ideal semiconductor owing to its earth abundance, superior stability in water, and an appropriate band gap for efficient solar light utilization. Moreover, its conduction band is suitable for O2 reduction to produce H2O2. However, a significant overpotential for water oxidation is required due to the poor surface properties of α-Fe2O3. Thus, unassisted solar H2O2 production is not yet possible. Herein, we demonstrate unassisted PEC H2O2 production using α-Fe2O3 for the first time by applying glycerol oxidation, which requires less bias compared with water oxidation. We obtain maximum Faradaic efficiencies of 96.89 ± 0.6% and 100% for glycerol oxidation and H2O2 production, respectively, with high stability for 25 h. Our results indicate that unassisted and stable PEC H2O2 production is feasible with in situ glycerol valorization using the α-Fe2O3 photoanode.

Ultrastable halide perovskite CsPbBr3 photoanodes achieved with electrocatalytic glassy-carbon and boron-doped diamond sheets

Halide perovskites exhibit exceptional optoelectronic properties for photoelectrochemical production of solar fuels and chemicals but their instability in aqueous electrolytes hampers their application. Here we present ultrastable perovskite CsPbBr3-based photoanodes achieved with both multifunctional glassy carbon and boron-doped diamond sheets coated with Ni nanopyramids and NiFeOOH. These perovskite photoanodes achieve record operational stability in aqueous electrolytes, preserving 95% of their initial photocurrent density for 168 h of continuous operation with the glassy carbon sheets and 97% for 210 h with the boron-doped diamond sheets, due to the excellent mechanical and chemical stability of glassy carbon, boron-doped diamond, and nickel metal. Moreover, these photoanodes reach a low water-oxidation onset potential close to +0.4 VRHE and photocurrent densities close to 8 mA cm-2 at 1.23 VRHE, owing to the high conductivity of glassy carbon and boron-doped diamond and the catalytic activity of NiFeOOH. The applied catalytic, protective sheets employ only earth-abundant elements and straightforward fabrication methods, engineering a solution for the success of halide perovskites in stable photoelectrochemical cells.

Ultrasound Induces Local Disorder of FeOOH on CdIn2S4 Photoanode for High Efficiency Photoelectrochemical Water Oxidation

The regulation of the crystal structure of oxygen evolution cocatalyst (OEC) is a promising strategy for enhancing the photoelectrochemical efficiency of photoanodes. However, the prevailing regulating approach typically requires a multistep procedure, presenting a significant challenge for maintaining the structural integrity and performance of the photoanode. Herein, FeOOH with a local disordered structure is directly grown on a CdIn2S4 (CIS) photoanode via a simple and mild sonochemical approach. By modulating the localized supersaturation of Ni ions, ultrasonic cavitation induces Ni ions to participate in the nucleation and growth of FeOOH clusters to cause local disorder of FeOOH. Consequently, the local disordered FeOOH facilitates the exposure of additional active sites, boosting OER kinetics and extending charge carrier lifetimes. Finally, the optimal photoanode reaches 4.52 mA cm-2 at 1.23 VRHE, and the onset potential shifts negatively by 330 mV, exhibiting excellent performance compared with that of other metal sulfide-based photoelectrodes reported thus far. This work provides a mild and controllable sonochemical method for regulating the phase structure of OECs to construct high-performance photoanodes.

Stacking textured films on lattice-mismatched transparent conducting oxides via matched Voronoi cell of oxygen sublattice

Transparent conducting oxides are a critical component in modern (opto)electronic devices and solar energy conversion systems, and forming textured functional films on them is highly desirable for property manipulation and performance optimization. However, technologically important materials show varied crystal structures, making it difficult to establish coherent interfaces and consequently the oriented growth of these materials on transparent conducting oxides. Here, taking lattice-mismatched hexagonal α-Fe2O3 and tetragonal fluorine-doped tin oxide as the example, atomic-level investigations reveal that a coherent ordered structure forms at their interface, and via an oxygen-mediated dimensional and chemical-matching manner, that is, matched Voronoi cells of oxygen sublattices, [110]-oriented α-Fe2O3 films develop on fluorine-doped tin oxide. Further measurements of charge transport characteristics and photoelectronic effects highlight the importance and advantages of coherent interfaces and well-defined orientation in textured α-Fe2O3 films. Textured growth of lattice-mismatched oxides, including spinel Co3O4, fluorite CeO2, perovskite BiFeO3 and even halide perovskite Cs2AgBiBr6, on fluorine-doped tin oxide is also achieved, offering new opportunities to develop high-performance transparent-conducting-oxide-supported devices.

Substitutional Cd Dopant as Photohole Transfer Mediator Boosting Photoelectrochemical Solar Energy Conversion of 2D Cd-ZnIn2 S4 Photoanode

Fast recombination dynamics of photocarriers competing with sluggish surface photohole oxidation kinetics severely restricts the photoelectrochemical (PEC) conversion efficiency of photoanode. Here, a defect engineering strategy is developed to regulate photohole transfer and interfacial injection dynamics of 2D ZnIn2 S4 (ZIS). Via selectively introducing substitutional Cd dopant at Zn sites of the ZIS basal plane, energy band structure and surface electrochemical activity are successfully modulated in the Cd-doped ZIS (Cd-ZIS) nanosheet array photoanode. Comprehensive characterizations manifest that a shallow acceptor level induced by Cd doping and superior electrochemical activity make surface Cd dopants simultaneously act as capture centers and active sites to mediate photohole dynamics at the reaction interface. In depth photocarrier dynamics analysis demonstrates that highly efficient photohole capture of Cd dopants brings about effective space separation of photocarriers and acceleration of surface reaction kinetics. Therefore, the optimum 2D Cd-ZIS achieves excellent PEC solar energy conversion efficiency with a photocurrent density of 5.1 mA cm-2 at 1.23 VRHE and a record of applied bias photon-to-current efficiency (ABPE) of 3.0%. This work sheds light on a microstructure design strategy to effectively regulate photohole dynamics for the next-generation semiconducting PEC photoanodes.

Liquid metal-embraced photoactive films for artificial photosynthesis

The practical applications of solar-driven water splitting pivot on significant advances that enable scalable production of robust photoactive films. Here, we propose a proof-of-concept for fabricating robust photoactive films by a particle-implanting technique (PiP) which embeds semiconductor photoabsorbers in the liquid metal. The strong semiconductor/metal interaction enables resulting films efficient collection of photogenerated charges and superior photoactivity. A photoanode of liquid-metal embraced BiVO4 can stably operate over 120 h and retain ~ 70% of activity when scaled from 1 to 64 cm2. Furthermore, a Z-scheme photocatalyst film of liquid-metal embraced BiVO4 and Rh-doped SrTiO3 particles can drive overall water splitting under visible light, delivering an activity 2.9 times higher than that of the control film with gold support and a 110 h stability. These results demonstrate the advantages of the PiP technique in constructing robust and efficient photoactive films for artificial photosynthesis.

Optical and Electrical Modulation Strategies of Photoelectrodes for Photoelectrochemical Water Splitting

When constructing efficient, cost-effective, and stable photoelectrodes for photoelectrochemical (PEC) systems, the solar-driven photo-to-chemical conversion efficiency of semiconductors is limited by several factors, including the surface catalytic activity, light absorption range, carrier separation, and transfer efficiency. Accordingly, various modulation strategies, such as modifying the light propagation behavior and regulating the absorption range of incident light based on optics and constructing and regulating the built-in electric field of semiconductors based on carrier behaviors in semiconductors, are implemented to improve the PEC performance. Herein, the mechanism and research advancements of optical and electrical modulation strategies for photoelectrodes are reviewed. First, parameters and methods for characterizing the performance and mechanism of photoelectrodes are introduced to reveal the principle and significance of modulation strategies. Then, plasmon and photonic crystal structures and mechanisms are summarized from the perspective of controlling the propagation behavior of incident light. Subsequently, the design of an electrical polarization material, polar surface, and heterojunction structure is elaborated to construct an internal electric field, which serves as the driving force to facilitate the separation and transfer of photogenerated electron-hole pairs. Finally, the challenges and opportunities for developing optical and electrical modulation strategies for photoelectrodes are discussed.

Cocatalysts-Photoanode Interface in Photoelectrochemical Water Splitting: Understanding and Insights

Sluggish oxygen evolution reactions on photoanode surfaces severely limit the application of photoelectrochemical (PEC) water splitting. The loading of cocatalysts on photoanodes has been recognized as the simplest and most efficient optimization scheme, which can reduce the surface barrier, provide more active sites, and accelerate the surface catalytic reaction kinetics. Nevertheless, the introduction of cocatalysts inevitably generates interfaces between photoanodes and oxygen evolution cocatalysts (Ph/OEC), which causes severe interfacial recombination and hinders the carrier transfer. Recently, many researchers have focused on cocatalyst engineering, while few have investigated the effect of the Ph/OEC interface. Hence, to maximize the advantages of cocatalysts, interfacial problems for designing efficient cocatalysts are systematically introduced. In this review, the interrelationship between the Ph/OEC and PEC performance is classified and some methods for characterizing Ph/OEC interfaces are investigated. Additionally, common interfacial optimization strategies are summarized. This review details cocatalyst-design-based interfacial problems, provides ideas for designing efficient cocatalysts, and offers references for solving interfacial problems.

Superhydrophilic CoFe Dispersion of Hydrogel Electrocatalysts for Quasi-Solid-State Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is an attractive strategy to convert solar energy to hydrogen. However, the lifetime of PEC devices is restricted by the photocorrosion of semiconductors and the instability of co-catalysts. Herein, we report a feasible in situ inherent cross-linking method for stabilizing semiconductors that uses a CoFe-dispersed polyacrylamide (PAM) hydrogel as a transparent protector. The CoFe-PAM hydrogel protected BiVO4 (BVO) photoanode reached a photocurrent density of 5.7 mA cm-2 at 1.23 VRHE under AM 1.5G illumination with good stability. The PAM hydrogel network improved the loading of Fe sites while enabling the retention of more CoFe co-catalysts and increasing the electron density of the reaction active sites, further improving the PEC performance and stability. More importantly, by tuning the polymerization network, we pioneer the use of quasi-solid-state electrolytes in photoelectrochemistry, where the high concentration of ionic solvent in the PAM hydrogel ensures effective charge transport and good water storage owing to the hydrophilic and porous structure of the hydrogel. This work expands the scope of PEC research by providing a class of three-dimensional hydrogel electrocatalysts and quasi-solid-state electrolytes with huge extension potential, and the versatility of these quasi-solid-state electrolytes can be employed for other semiconductors.

Determining the Transformation Kinetics of Water Oxidation Intermediates on Hematite Photoanode

The oxygen evolution reaction (OER) from water is a sequential oxidation reaction process, involved in transformation of multiple reaction intermediates. For photo(electro)catalytic OER, revealing the intermediates transformation kinetics is quite challenging due to its coupling with photogenerated charge dynamics. Herein, we specifically study the transformation kinetics of the OER intermediates in rationally thin hematite photoanodes through increasing the ratio between surface intermediates and photogenerated charges in bulk. We directly identify the formation and consumption kinetics of one-hole OER intermediate (FeIV═O) in photoelectrochemical water oxidation using operando transient absorption (TA) spectroscopy. The microsecond formation kinetics of the FeIV═O species are sensitively changed by the excitation mode of Fe2O3. The subsecond consumption kinetics are closely dependent on surface FeIV═O species density, demonstrating that the cooperation of FeIV═O intermediates is the key to accelerating water oxidation kinetics on the Fe2O3 surface. This work provides insight into understanding and controlling water oxidation reaction kinetics on Fe2O3 surface.

Direct Growth of Polymeric Carbon Nitride Nanosheet Photoanode for Greatly Efficient Photoelectrochemical Water-Splitting

A general method for the direct synthesis of highly homogeneous and dense polymerized carbon nitride (PCN) nanosheet films on F: SnO2 (FTO) is developed. Detailed photoelectrochemical (PEC) water-splitting studies reveal that the as-synthesized PCN films exhibit outstanding performance as photoanode for PEC water-splitting. The optimal PCN photoanode exhibits excellent photocurrent density of 650 µA cm-2 , and monochromatic incident photon-to-electron conversion efficiency (IPCE) value up to 30.55% (λ = 400 nm) and 25.97% (λ = 420 nm) at 1.23 VRHE in 0.1 m KOH electrolyte. More importantly, the PCN photoanode has an excellent hole extraction efficiency of up to 70 ± 3% due to the abundance of active sites provided by the PCN photoanode nanosheet, which promotes the transport rates of OER-relevant species. These PCN films provide a new benchmark for PCN photoanode materials.

Achieving High Selectivity in Photocatalytic Oxidation of Toluene on Amorphous BiOCl Nanosheets Coupled with TiO2

The inert C(sp³)-H bond and easy overoxidation of toluene make the selective oxidation of toluene to benzaldehyde a great challenge. Herein, we present that a photocatalyst, constructed with a small amount (1 mol %) of amorphous BiOCl nanosheets assembled on TiO₂ (denoted as 0.01BOC/TiO₂), shows excellent performance in toluene oxidation to benzaldehyde, with 85% selectivity at 10% conversion, and the benzaldehyde formation rate is up to 1.7 mmol g^-1 h^-1, which is 5.6 and 3.7 times that of bare TiO₂ and BOC, respectively. In addition to the charge separation function of the BOC/TiO₂ heterojunction, we found that the amorphous structure of BOC endows its abundant surface oxygen vacancies (Ov), which can further promote the charge separation. Most importantly, the surface Ov of amorphous BOC can efficiently adsorb and activate O₂, and amorphous BOC makes the product, benzaldehyde, easily desorb from the catalyst surface, which alleviates the further oxidation of benzaldehyde, and results in the high selectivity. This work highlights the importance of the microstructure based on heterojunctions, which is conducive to the rational design of photocatalysts with high performance in organic synthesis.

Long-term durability of metastable β-Fe2O3 photoanodes in highly corrosive seawater

Durability is one prerequisite for material application. Photoelectrochemical decomposition of seawater is a promising approach to produce clean hydrogen by using solar energy, but it always faces the problem of serious Cl^- corrosion. We find that the main deactivation mechanism of the photoanode is oxide surface reconstruction accompanied by the coordination of Cl^- during seawater splitting, and the stability of the photoanode can be effectively improved by enhancing the metal-oxygen interaction. Taking the metastable β-Fe₂O₃ photoanode as an example, Sn added to the lattice can enhance the M-O bonding energy and hinder the transfer of protons to lattice oxygen, thereby inhibiting excessive surface hydration and Cl^- coordination. Therefore, the bare Sn/β-Fe₂O₃ photoanode delivers a record durability for photoelectrochemical seawater splitting over 3000 h.

Edge-Sharing Octahedrally Coordinated NiFe Dual Active Sites on ZnFe2 O4 for Photoelectrochemical Water Oxidation

The structural properties of octahedral sites (B_Oh ) in spinel oxides (AB₂ O₄ ) play vital roles in the electrochemical performance of oxygen-related reactions. However, the precise manipulation of AB₂ O₄ remains challenging due to the complexity of their crystal structure. Here, a simple and versatile molten-salt-mediated strategy is reported to introduce Ni²⁺ in B_oh sites intentionally on the surface of zinc ferrite (ZnFe₂ O₄ , ZFO) to promote the active sites for photoelectrochemical (PEC) water splitting. The as-created photoanode (ZFO-MSNi) shows a remarkable cathodic shift of ≈ 450 mV (turn-on voltage of ≈ 0.6 V_RHE ) as well as three times the 1-sun photocurrent density at 1.23 V_RHE for PEC water oxidation in comparison with bare ZFO. A comprehensive structural characterization clearly reveals the local structure of the introduced Ni²⁺ in ZFO-MSNi. Fewer surface trapping states are observed while the precisely introduced Ni²⁺ and associated neighboring Fe^(3-σ)+ (0<σ<1) sites unite in an edge-sharing octahedral configuration to function as NiFe dual active sites for PEC water oxidation. Moreover, open circuit potential measurements and rapid-scan voltammetry investigation give further insight into the enhanced PEC performance. Overall, this work displays a versatile strategy to regulate the surface active sites of photoelectrodes for increasing performance in PEC solar energy conversion systems.

Effect of acid treatment on boosting the photoelectrochemical performance of doped and codoped α-Fe2O3 photoanodes

Acid treatment of Ti-doped α-Fe₂O₃ photoanode can reduce the onset potential and promote the photocurrent density for photoelectrochemical (PEC) water splitting reaction. However, the inner mechanism of how this occurs has not yet been clarified. This report compares the effect of HCl hydrothermal treatment on α-Fe₂O₃ photoanodes doped with Ge, Pt, Ti, and Sn or codoped with TiGe, TiPt, and TiSn. The findings show that the promotion effect of HCl hydrothermal treatment was far less significant on the Ge-, Pt-, and Sn-doped α-Fe₂O₃ than on the Ti-doped one. In contrast, the codoped photoanodes could realize a lift in the photocurrent of up to 39% at 1.23 V_RHE (versus the reversible hydrogen electrode) and a reduction in the potential onset by ∼60 mV after HCl hydrothermal treatment. Anatase TiO₂ was detected by Raman spectroscopy on the Ti-doped α-Fe₂O₃ with adequate treatment in HCl solution. Thus, the performance promotion by acid treatment was ascribed to the surface-concentrated Ti-O bonds acting as a passivation layer that could increase the charge-capture capacity and reduce the charge-transfer resistance, as demonstrated by the potential-modulated electrochemical impedance spectroscopy results. HCl treatment of the in situ-doped α-Fe₂O₃ and an excessive treatment time for the ex situ-doped α-Fe₂O₃ caused an inhibition in the PEC performance, which could be attributed to the adverse effect of lattice defects induced by acid corrosion. The application scope of HCl treatment on the doped α-Fe₂O₃ was determined by revealing its working mechanism.

Confirming High-Valent Iron as Highly Active Species of Water Oxidation on the Fe, V-Coupled Bimetallic Electrocatalyst: In Situ Analysis of X-ray Absorption and Mössbauer Spectroscopy

Iron (Fe)-based bimetallic oxides/hydroxides have been widely investigated for promising alkaline electrochemical oxygen evolution reactions (OERs), but it still remains argumentative whether Fe³⁺ or Fe⁴⁺ intermediates are highly active for efficient OER. Here, we rationally designed and prepared one Fe, V-based bimetallic composite nanosheet by employing the OER-inert V element as a promoter to completely avoid the argument of real active metals and using our recently developed one-dimensional conductive nickel phosphide (NP) as a support. The as-obtained hierarchical nanocomposite (denoted as FeVO_x/NP) was evaluated as a model catalyst to gain insight into the iron-based species as highly active OER sites by performing in situ X-ray absorption spectroscopy and ⁵⁷Fe Mössbauer spectroscopy measurements. It was found that the high-valent Fe⁴⁺ species can only be detected during the OER process of the FeVO_x/NP nanocomposite instead of the iron counterpart itself. Together with the fact that the OER activities of both the vanadium and iron counterparts are by far worse than that of the FeVO_x/NP composite, we can confirm that the high-valent Fe⁴⁺ formed are the highly active species for efficient OER. As demonstrated by density functional theory simulations, the composite of Fe and V metals is proposed to cause a decreased Gibbs free energy as well as theoretical overpotential of water oxidation with respect to its counterparts, as is responsible for its excellent OER performance with extremely low OER overpotential (290 mV at 500 mA cm^-2) and extraordinary stability (1000 h at 100 mA cm^-2).

CoMoO4-modified hematite with oxygen vacancies for high-efficiency solar water splitting

Hematite is a potential photoelectrode for photoelectrochemical (PEC) water splitting. Nevertheless, its water oxidation efficiency is highly limited by its significant photogenerated carrier recombination, poor conductivity and slow water oxidation kinetics. Herein, under low-vacuum (LV) conditions, we fabricated a CoMoO₄ layer on oxygen-vacancy-modified hematite (CoMo-Fe₂O₃ (LV)) for the first time for efficient solar water splitting. The existence of oxygen vacancies can significantly facilitate the electrical conductivity, while the large onset potential along with oxygen vacancies can be lowered by the CoMoO₄ with accelerated water oxidation kinetics. Therefore, a high photocurrent density of 3.53 mA cm^-2 at 1.23 V_RHE was obtained for the CoMo-Fe₂O₃ (LV) photoanode. Moreover, it can be further coupled with the FeNiOOH co-catalyst to reach a benchmark photocurrent of 4.18 mA cm^-2 at 1.23 V_RHE, which is increased around 4-fold compared with bare hematite (0.90 mA cm^-2). The combination of CoMoO₄, FeNiOOH, and oxygen vacancies may be used as a reasonable strategy for developing high-efficiency hematite-based photoelectrodes for solar water oxidation.

Single-atomic-site platinum steers photogenerated charge carrier lifetime of hematite nanoflakes for photoelectrochemical water splitting

Although much effort has been devoted to improving photoelectrochemical water splitting of hematite (α-Fe₂O₃) due to its high theoretical solar-to-hydrogen conversion efficiency of 15.5%, the low applied bias photon-to-current efficiency remains a huge challenge for practical applications. Herein, we introduce single platinum atom sites coordination with oxygen atom (Pt-O/Pt-O-Fe) sites into single crystalline α-Fe₂O₃ nanoflakes photoanodes (SAs Pt:Fe₂O₃-Ov). The single-atom Pt doping of α-Fe₂O₃ can induce few electron trapping sites, enhance carrier separation capability, and boost charge transfer lifetime in the bulk structure as well as improve charge carrier injection efficiency at the semiconductor/electrolyte interface. Further introduction of surface oxygen vacancies can suppress charge carrier recombination and promote surface reaction kinetics, especially at low potential. Accordingly, the optimum SAs Pt:Fe₂O₃-Ov photoanode exhibits the photoelectrochemical performance of 3.65 and 5.30 mA cm^-2 at 1.23 and 1.5 V_RHE, respectively, with an applied bias photon-to-current efficiency of 0.68% for the hematite-based photoanodes. This study opens an avenue for designing highly efficient atomic-level engineering on single crystalline semiconductors for feasible photoelectrochemical applications.

Design of Ti-Pt Co-doped α-Fe2O3 photoanodes for enhanced performance of photoelectrochemical water splitting

This study demonstrates Ti and Pt co-doping can synergistically improve the PEC performance of the α-Fe₂O₃ photoanode. By varying the doping methods, the sample with in-situ Ti ex-situ Pt doping (Ti_i-Pt_e) exhibits the best performance. It demonstrates that Ti doping in bulk facilities charge separation and Pt doping on the surface further accelerates charge transfer. In contrast, Ti doping on the surface inhibits charge separation, and Pt doping in bulk hinders charge separation and transfer. HCl treatment is used to minimize the onset potential further, while it is favorable for the ex-situ doped α-Fe₂O₃, which is more efficient on Ti_e than the Pt_e-doped ones. On the ex-situ Ti-doped α-Fe₂O₃ after HCl treatment, anatase TiO₂ is probed, suggesting that Ti-O bonds accumulate when Fe-O bonds are partly removed, which enhances the charge transfer in surface states. Unfortunately, HCl treatment also induces lattice defects that are adverse to charge transport, inhibiting the performance of in-situ doped α-Fe₂O₃ and excessively treated ex-situ doped ones. Coupled with methanol solvothermal treatment and NiOOH/FeOOH cocatalysts loading, the optimized Ti-Pt/Fe₂O₃ photoanode exhibits an impressive photocurrent density of 2.81 mA cm^-2 at 1.23 V vs. RHE and a low onset potential of 0.60 V vs. RHE.

Enabling high low-bias performance of Fe2O3 photoanode for photoelectrochemical water splitting

Fe₂O₃ is a promising photoanode material used for photoelectrochemical water splitting due to its narrow bandgap and excellent stability in solution. However, because the nanorods shrink and coalesce when annealed under high temperatures, the charge separation and injection efficiencies are suppressed in the conventional nanocoral Fe₂O₃, resulting in its high bias potential and low photocurrent density. Herein, by improving the radial growth of FeOOH precursor, highly dispersed Fe₂O₃ nanorods could be prepared. It enabled them to have sufficient light-harvesting and short charge transport distance, high light absorption and charge separation/injection efficiencies, increased photocurrent density and reduced onset potential V_on. The optimized Fe₂O₃ photoanodes obtained a remarkable low-bias photocurrent density of 0.84 mA cm^-2 at 1.0 V versus reversible hydrogen electrode (vs. RHE). It was further improved to 1.36 mA cm^-2 at 1.0 V vs. RHE with the V_on reduced to 0.50 V vs. RHE when post-treated with a solvothermal method and loaded with NiOOH/FeOOH cocatalysts. The applied bias photo-to-current conversion efficiency was maximized to 0.45% at 0.84 V vs. RHE.

Dynamic charge collecting mechanisms of cobalt phosphate on hematite photoanodes studied by photoinduced absorption spectroscopy

Reaction sites, surface states, and surface loaded electrocatalysts are photoinduced charge storage sites and critical to photoelectrochemical (PEC) performance, however the charge transfer mechanisms involved in the three remain poorly understood. Herein, we studied the charge transfer processes in hematite (Fe₂O₃) without/with loaded cobalt phosphate (CoPi) by operando photoinduced absorption (PIA) spectroscopy. The loaded CoPi receives trapped holes in surface states at low potential and directly captures holes in the valence band at high potential. Through the dynamic hole storage mechanisms, loaded CoPi on Fe₂O₃ facilitates spatial charge separation and serves as a charge transfer mediator, instead of serving as a catalyst to change the water oxidation mechanism (constant third-order reaction). The spatial separation of photoinduced charges between Fe₂O₃ and CoPi results in more long-lived holes on the Fe₂O₃ surface to improve PEC water oxidation kinetically. The dynamic charge collecting mechanism sheds light on the understanding and designing of electrocatalyst loaded photoanodes.

Boosting Charge Transfer Efficiency by Nanofragment MXene for Efficient Photoelectrochemical Water Splitting of NiFe(OH)x Co-Catalyzed Hematite

The use of oxygen evolution co-catalysts (OECs) with hematite photoanodes has received much attention because of the potential to reduce surface charge recombination. However, the low surface charge transfer and bulk charge separation rate of hematite are not improved by decorating with OECs, and the intrinsic drawbacks of hematite still limit efficient photoelectrochemical (PEC) water splitting. Here, we successfully overcame the sluggish oxygen evolution reaction performance of hematite for water splitting by inserting zero-dimensional (0D) nanofragmented MXene (NFMX) as a hole transport material between the hematite and the OEC. The 0D NFMX was fabricated from two-dimensional (2D) MXene sheets and deposited onto the surface of a three-dimensional (3D) hematite photoanode via a centrifuge-assisted method without altering the inherent performance of the 2D MXene sheets. Among many OECs, NiFe(OH)x was selected as the OEC to improve hematite PEC performance in our system because of its efficient charge transport behavior and high stability. Because of the great synergy between NFMX and NiFe(OH)x, NiFe(OH)x/NFMX/Fe2O3 achieved a maximum photocurrent density of 3.09 mA cm-2 at 1.23 VRHE, which is 2.78-fold higher than that of α-Fe2O3 (1.11 mA cm-2). Furthermore, the poor stability of MXene in an aqueous solution for water splitting was resolved by uniformly coating it with NiFe(OH)x, after which it showed outstanding stability for 60 h at 1.23 VRHE. This study demonstrates the successful use of NFMX as a hole transport material combined with an OEC for highly efficient water splitting.

How titanium and iron are integrated into hematite to enhance the photoelectrochemical water oxidation: a review

Hematite has been considered as a promising photoanode candidate for photoelectrochemical (PEC) water oxidation and has attracted numerous interests in the past decades. However, intrinsic drawbacks drastically lower its photocatalytic activity. Ti-based modifications including Ti-doping, Fe₂O₃/Fe₂TiO₅ heterostructures, TiO₂ passivation layers, and Ti-containing underlayers have shown great potential in enhancing the PEC conversion efficiency of hematite. Moreover, the combination of Ti-based modifications with various strategies towards more efficient hematite photoanodes has been widely investigated. Nevertheless, a corresponding comprehensive overview, especially with the most recent working mechanisms, is still lacking, limiting further improvement. In this respect, by summarizing the recent progress in Ti-modified hematite photoanodes, this review aims to demonstrate how the integration of titanium and iron atoms into hematite influences the PEC properties by tuning the carrier behaviours. It will provide more cues for the rational design of high-performance hematite photoanodes towards future practical applications.

Enhanced Oxygen Evolution Reaction Activity in Hematite Photoanodes: Effect of Sb-Li Co-Doping

Co-doping represents a valid approach to maximize the performance of photocatalytic and photoelectrocatalytic semiconductors. Albeit theoretical predictions in hematite suggesting a bulk n-type doping and a surface p-type doping would deliver best results, hematite co-doping with coupled cations possessing low and high oxidation states has shown promising results. Herein, we report, for the first time, Sb and Li co-doping of hematite photoanodes. Particularly, this is also a seminal work for the introduction of the highly reactive Sb⁵⁺ directly into the hematite thin films. Upon co-doping, we have a synergistic effect on the current densities with a 67-fold improvement over the standard. Via a combined investigation with profuse photoelectrochemical measurements, X-ray diffraction, X-ray photoelectron spectroscopy, and Raman analyses, we confirm the two doping roles of Sb⁵⁺ and Li⁺ as the substitutional and interstitial dopant, respectively. The improvements are attributed to a higher charge carrier concentration along with a lower charge transfer resistance at the surface.

Dynamic semiconductor-electrolyte interface for sustainable solar water splitting over 600 hours under neutral conditions

Photoelectrochemical (PEC) water splitting that functions in pH-neutral electrolyte attracts increasing attention to energy demand sustainability. Here, we propose a strategy to in situ form a NiB layer by tuning the composition of the neutral electrolyte with the additions of nickel and borate species, which improves the PEC performance of the BiVO₄ photoanode. The NiB/BiVO₄ exhibits a photocurrent density of 6.0 mA cm^-2 at 1.23 V_RHE with an onset potential of 0.2 V_RHE under 1 sun illumination. The photoanode displays a photostability of over 600 hours in a neutral electrolyte. The additive of Ni²⁺ in the electrolyte, which efficiently inhibits the dissolution of NiB, can accelerate the photogenerated charge transfer and enhance the water oxidation kinetics. The borate species with B─O bonds act as a promoter of catalyst activity by accelerating proton-coupled electron transfer. The synergy effect of both species suppresses the surface charge recombination and inhibits the photocorrosion of BiVO₄.

Constructing NCuS Interface Chemical Bonds over SnS2 for Efficient Solar-Driven Photoelectrochemical Water Splitting

The restricted charge transfer and slow oxygen evolution reaction (OER) dynamics tremendously hamper the realistic implementation of SnS₂ photoanodes for photoelectrochemical (PEC) water splitting. Here, a novel strategy is developed to construct interfacial NCuS bonds between NC skeletons and SnS₂ (CuNC@SnS₂ ) for efficient PEC water splitting. Compared with SnS₂ , the PEC activity of CuNC@SnS₂ photoelectrode is tremendously heightened, obtaining a current density of 3.40 mA cm² at 1.23 V_RHE with a negatively shifted onset potential of 0.04 V_RHE , which is 6.54 times higher than that of SnS₂ . The detailed experimental characterizations and theoretical calculation demonstrate that the interfacial NCuS bonds enhance the OER kinetic, reduce the surface overpotential, facilitate the separation of photon-generated carriers, and provide a fast transmission channel for electrons. This work presents a new approach for modulating charge transfer by interfacial bond design in heterojunction photoelectrodes toward promoting PEC performance and solar energy application.

Scavenging of Organic Pollutant and Fuel Generation through Cost-Effective and Abundantly Accessible Rust: A Theoretical Support with DFT Simulations

Waste management and energy generation are the foremost concerns due to their direct relationship with biological species and the environment. Herein, we report the utilization of iron rust (inorganic pollutant) as a photocatalyst for the photodegradation of methylene blue (MB) dye (organic pollutant) under visible light (economic) and water oxidation (energy generation). Iron rust was collected from metallic pipes and calcined in the furnace at 700 °C for 3 h to remove the moisture/volatile content. The uncalcined and calcined rust NPs are characterized through scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Fourier-transform infrared (FTIR) analysis, X-ray Diffraction (XRD), and thermogravimetric analysis (TGA). The morphological study illustrated that the shape of uncalcined and calcined iron rust is spongy, porous, and agglomerated. The XRD and DLS particle sizes are in a few hundred nanometers range. The photodegradation (PD) investigation shows that calcined rust NPs are potent for the PD of modeled MB, and the degradation efficiency was about 94% in a very short time of 11 min. The photoelectrochemical (PEC) measurements revealed that calcined rust NPs are more active than uncalcined rust under simulated 1 SUN illumination with the respective photocurrent densities of ~0.40 and ~0.32 mA/cm². The density functional theory simulations show the chemisorption of dye molecules over the catalyst surface, which evinces the high catalytic activity of the catalyst. These results demonstrate that cheaper and abundantly available rust can be useful for environmental and energy applications.

Decoupling light absorption and carrier transport via heterogeneous doping in Ta3N5 thin film photoanode

The trade-off between light absorption and carrier transport in semiconductor thin film photoelectrodes is a major limiting factor of their solar-to-hydrogen efficiency for photoelectrochemical water splitting. Herein, we develop a heterogeneous doping strategy that combines surface doping with bulk gradient doping to decouple light absorption and carrier transport in a thin film photoelectrode. Taking La and Mg doped Ta₃N₅ thin film photoanode as an example, enhanced light absorption is achieved by surface La doping through alleviating anisotropic optical absorption, while efficient carrier transport in the bulk is maintained by the gradient band structure induced by gradient Mg doping. Moreover, the homojunction formed between the La-doped layer and the gradient Mg-doped layer further promotes charge separation. As a result, the heterogeneously doped photoanode yields a half-cell solar-to-hydrogen conversion efficiency of 4.07%, which establishes Ta₃N₅ as a leading performer among visible-light-responsive photoanodes. The heterogeneous doping strategy could be extended to other semiconductor thin film light absorbers to break performance trade-offs by decoupling light absorption and carrier transport.

Coupling effect between hole storage and interfacial charge transfer over ultrathin CoPi-modified hematite photoanodes

Understanding the functionality of the modification layer in regulating the charge transfer process at the semiconductor/electrolyte interface is of great significance to the rational design of photoelectrocatalytic water oxidation systems. Herein, by systematically investigating and comparing the charge transfer kinetics behaviors over ferrihydrite (Fh)- and cobalt phosphate (CoPi)-modified hematite (Fe₂O₃) photoanodes, we unveiled the essential relation between photocurrent enhancement and the charge transfer process. With the hole-storage material Fh as a reference, it was found that CoPi demonstrates high hole-storage capacity at a low bias region (<1.0 V vs. RHE) due to the effective release of Fermi level pinning. Afterwards, the stored holes would be timely injected into the electrolyte for water oxidation, caused by the enhanced charge separation in the presence of CoPi. In contrast, the decoration of Fh can only slightly passivate the surface states and promote hole injection in the high potential region. Subsequently, superior hole-storage capacity in the low-potential region is recognized as a crucial factor for photocurrent enhancement. These combined results provide new insights into the understanding of interfacial charge transfer kinetics.

Regulating Sn self-doping and boosting solar water splitting performance of hematite nanorod arrays grown on fluorine-doped tin oxide via low-level Hf doping

Hematite (α-Fe₂O₃) nanorod arrays grown on fluorine-doped tin oxide (FTO) substrate exhibit outstanding solar water splitting efficiency, benefiting from Sn self-doping induced by high-temperature annealing. However, this Sn self-doping couldn't be freely controlled without changing the optimized annealing conditions, which limits the further improvement of their photoelectrochemical (PEC) properties. Here, we report a facile hydrothermal synthesis with subsequent annealing approach to regulate the Sn diffusion via hafnium (Hf) doping as well as enhance the PEC performance of hematite photoanode. Upon increasing the Hf doping concentration, the Sn self-doping content was continuously suppressed. The very low doping-level of Hf (i.e., atomic Hf/Fe = 0.13 ∼ 1.54%) was sufficient for enhancing the electrical conductivity. The Hf-doped α-Fe₂O₃ with the optimized dopant concentration (Hf/Fe = 1.34%, denoted as 0.25-Hf-Fe₂O₃) showed a photocurrent density of 1.79 mA/cm² at 1.23 V vs. RHE, 70% higher than that of the Sn self-doped one (Pristine-Fe₂O₃). The donor density of 0.25-Hf-Fe₂O₃ increased 2.5 times compared to Pristine-Fe₂O₃ while its space-charge resistance and charge transfer resistance declined by 40% and 22%, respectively, verifying Hf doping improves the charge carrier density and accelerates the charge transfer for solar water oxidation. We offered here a prospective dopant alternative for preparing superior hematite-based photoanode.

Bunch of Grape-Like Shape PANI/Ag2O/Ag Nanocomposite Photocatalyst for Hydrogen Generation from Wastewater

Polyaniline (PANI) and PANI/Ag2O/Ag composites I and II were prepared under different AgNO3 oxidant concentrations using the oxidative photopolymerization method. The chemical structure and optical, electrical, and morphological properties were determined for the prepared nanocomposite. The PANI/Ag2O/Ag composite II has the optimum optical properties, in which the bandgaps of PANI, composite I, and composite II are 3.02, 1.71, and 1.68 eV, respectively, with the morphology of a bunch of grape-like shapes with average particles sizes of 25 nm. Under the optimum optical properties, glass/PANI/Ag2O/Ag composite II electrode is used for hydrogen generation from sewage water. The measurements are carried out from a three-electrode cell under a xenon lamp. The effects of light wavelengths and temperature on the produced current density ( $J_{\text{ph}}$ ) are mentioned. Under the applied voltage (at 30°C), the current density values ( $J_{\text{ph}}$ ) increase from 0.003 to 0.012 mA.cm-2 in dark and light, respectively. While increasing the temperature, $J_{\text{ph}}$ values increase to 0.032 mAcm-2 at 60°C. The thermodynamic parameters are calculated, in which the activation energy ( $E_{\text{a}}$ ), enthalpy ( $\Delta H\ast$ ), and entropy ( $\Delta S\ast$ ) values are 27.1 kJ·mol-1, 24.5 J mol-1, and 140.5 J K-1 mol-1, respectively. Finally, a simple mechanism for the produced hydrogen generation rate is mentioned. The prepared electrode is a very cheap (1$ for $12\ast 12\text{c}{\text{m}}^2$ ) electrode.

Healing Ion-Implanted Semiconductors by Hybrid Microwave Annealing: Activation of Nitrogen-Implanted TiO2

In order to recover the damaged structure of a nitrogen-implanted TiO₂ (N-I-TiO₂) photoanode, hybrid microwave annealing (HMA) is proposed as an alternative postannealing process instead of conventional thermal annealing (CTA). Compared to CTA, HMA provides distinctive advantages: (i) facile transformation of the interstitial N-N states into substitutional N-Ti states, (ii) better preservation of the ion-implanted nitrogen in TiO₂, and (iii) effective alleviation of lattice strain and reconstruction of the broken bonds. As a result, the HMA-activated photoanode improves the photocurrent density by a factor of ∼3.2 from 0.29 to 0.93 mA cm^-2 at 1.23 V_RHE and the incident photon-to-current conversion efficiency (IPCE) from ∼2.9% to ∼10.5% at 430 nm relative to those of the as-prepared N-I-TiO₂ photoanode in photoelectrochemical water oxidation, which are much better than those of the CTA-activated photoanode (0.58 mA cm^-2 at 1.23 V_RHE and IPCE of 5.7% at 430 nm), especially in the visible light region (≥420 nm).

Preparation, Characterization, and Electrochemical Performance of the Hematite/Oxidized Multi-Walled Carbon Nanotubes Nanocomposite

In this research work, a hematite (α-Fe₂O₃) nanoparticle was prepared and then mixed with oxidized multi-walled carbon nanotubes (O-MWCNT) to form a stable suspension of an α-Fe₂O₃/O-MWCNTs nanocomposite. Different characterization techniques were used to explore the chemical and physical properties of the α-Fe₂O₃/O-MWCNTs nanocomposite, including XRD, FT-IR, UV-Vis, and SEM. The results revealed the successful formation of the α-Fe₂O₃ nanoparticles, and the oxidation of the MWCNT, as well as the formation of stable α-Fe₂O₃/O-MWCNTs nanocomposite. The electrochemical behaviour of the α-Fe₂O₃/O-MWCNTs nanocomposite was investigated using cyclic voltammetry (CV) and linear sweep voltammetry (LSV), and the results revealed that modification of α-Fe₂O₃ nanoparticles with O-MWCNTs greatly enhanced electrochemical performance and capacitive behaviour, as well as cycling stability.

Dual co-catalysts activated hematite nanorods with low turn-on potential and enhanced charge collection for efficient solar water oxidation

Hematite (α-Fe₂O₃) photoanode suffers from significant photocarrier recombination and sluggish water oxidation kinetics for photoelectrochemical water splitting. To address these challenges, this work demonstrates the construction of dual co-catalysts modified Fe₂O₃nanorods photoanode by strategically incorporating CoPi and Co(OH)_xfor photoelectrochemical water oxidation. The Fe₂O₃/CoPi/Co(OH)_xnanorods photoanode exhibits the lowest ever turn-on potential of 0.4V_RHE(versus reversible hydrogen electrode) and a photocurrent density of 0.55 mA cm^-2at 1.23V_RHE, 358% higher than that of pristine Fe₂O₃nanorods. The dual co-catalysts modification enhances the light-harvesting efficiency, surface photovoltage and hole transfer kinetics of the hybrid photoanode. The dual co-catalyst coupling also increases the carrier density and significantly reduces the depletion width (1.9 nm), resulting in improved conductivity and favorable band bending, boosting photogenerated hole transfer efficiency for water oxidation.

An in situ fluorine and ex situ titanium two-step co-doping strategy for efficient solar water splitting by hematite photoanodes

A unique two-step co-doping strategy of in situ fluorine doping followed by ex situ titanium doping enhances the performance of the hematite photoanode in photoelectrochemical water splitting much more effectively than single-step co-doping strategies that are either all in situ or all ex situ. The optimized fluorine, titanium co-doped Fe₂O₃ photoanode without any cocatalyst achieves 1.61 mA cm^-2 at 1.23 V_RHE under 100 mW cm^-2 solar irradiation, which is ∼2 and 3 times those of titanium or fluorine singly-doped Fe₂O₃ photoanodes, respectively. The promotional effect is attributed to the synergy of the two dopants, in which the doped fluorine anion substitutes oxygen of Fe₂O₃ to increase the positive charges of iron sites, while the doped titanium cation substitutes iron to increase free electrons. Moreover, excess titanium on the surface suppresses the drain of in situ doped fluorine and agglomeration of hematite during the high-temperature annealing process, and passivates the surface trap states to further promote the synergy effects of the two dopants.

Machine Learning Guided Dopant Selection for Metal Oxide-Based Photoelectrochemical Water Splitting: The Case Study of Fe2 O3 and CuO

Doping is an effective strategy for tuning metal oxide-based semiconductors for solar-driven photoelectrochemical (PEC) water splitting. Despite decades of extensive research effort, the dopant selection is still largely dependent on a trial-and-error approach. Machine learning (ML) is promising in providing predictable insights on the dopant selection for high-performing PEC systems because it can uncover correlations from the seemingly ambiguous linkages between vast features of dopants and the PEC performance of doped photoelectrodes. Herein, the authors successfully build ML model to predict the doping effect of 17 metal dopants into hematite (Fe₂ O₃ ), a prototype photoelectrode material. Their findings disclose the critical parameters from the 10 intrinsic features of each dopant. The model is further experimentally validated by the coherent prediction on Y and La dopants' behaviors. Further interpretation of the ML model suggests that the chemical state is the most significant selection criteria, meanwhile, dopants with higher metal-oxygen bond formation enthalpy and larger ionic radius are favored in improving the charge separation and transfer (CST) in the Fe₂ O₃ photoanodes. The generic feature of this ML guided selection criteria has been further extended to CuO-based photoelectrodes showing improved CST by alkaline metal ions doping.

Revealing long-lived electron–hole migration in core–shell α/γ-Fe2O3/FCP for efficient photoelectrochemical water oxidation

A γ/α-Fe2O3/FCP photoanode with rapid interfacial hole injection and long-lived charge separation states (∼50.64 ps) showed that the synergistic effect of a phase junction and FeCo Prussian blue (FCP) could optimize the kinetics in water oxidation.