Solid cyclooctatetraene-based triplet quencher demonstrating excellent suppression of singlet-triplet annihilation in optical and electrical excitation

A New Organic Laser Material Design Toward Ultra-Low Amplified Spontaneous Red Emission and Ultra-Bright Electroluminescence

Significant efforts are dedicated to developing new classes of organic semiconductor materials to achieve electrically pumped lasing. However, further advancements are necessary to understand the relationship between the structure and property for the creation of innovative laser materials with high stability, low triplet yield, ultra-low lasing threshold, and low-efficiency roll-off at ultra-bright electroluminescence. Here, a new design principle is validated for organic semiconductor laser materials, demonstrating simultaneous enhancement in the key figures of merit of low amplified spontaneous emission thresholds (Eth), efficient electroluminescence, and low triplet yields. By applying the Einstein stimulated emission rate equation and Strickler-Berg approximation, Two red-emitting laser dimers of Cibalackrot with different linkers are constructed, leading to giant enhancement (≈250%) in oscillator strengths, and stimulated emission cross-sections. When blended in poly(9,9-dioctylfluorene-alt-benzothiadiazole), the new dimers achieve an ultra-low Eth (4.5 ± 0.3 µJ cm-2) in the deep red region (λASE = 655 nm), among the lowest reported for deep-red emitters. Organic light-emitting diodes (OLEDs) utilizing the dimer blend exhibit low-efficiency roll-off under DC mode. Under pulse operation, the OLEDs achieve high current densities (90 A m-2) and ultrahigh brightness (≈710 000 cd m-2). These findings highlight the dimerization design as an excellent platform to advance organic semiconductor laser materials.

Progress and Perspective toward Continuous-Wave Organic Solid-State Lasers

A continuous-wave (CW) organic solid-state laser is highly desirable for spectroscopy, sensing, and communications, but is a significant challenge in optoelectronics. The accumulation of long-lived triplet excitons and relevant excited-state absorptions, as well as singlet-triplet annihilation, are the main obstacles to CW lasing. Here, progress in singlet- and triplet-state utilizations in organic gain media is reviewed to reveal the issues in working with triplets. Then, exciton behaviors that inhibit light oscillations during long excitation pulses are discussed. Further, recent advances in increasing organic lasing pulse widths from microseconds toward the indication of CW operation are summarized with respect to molecular designs, advanced resonator architectures, triplet scavenging, and potential triplet contribution strategies. Finally, future directions and perspectives are proposed for achieving stable CW organic lasers with significant triplet contribution.

Photooxidation triggered ultralong afterglow in carbon nanodots

It remains a challenge to obtain biocompatible afterglow materials with long emission wavelengths, durable lifetimes, and good water solubility. Herein we develop a photooxidation strategy to construct near-infrared afterglow carbon nanodots with an extra-long lifetime of up to 5.9 h, comparable to that of the well-known rare-earth or organic long-persistent luminescent materials. Intriguingly, size-dependent afterglow lifetime evolution from 3.4 to 5.9 h has been observed from the carbon nanodots systems in aqueous solution. With structural/ultrafast dynamics analysis and density functional theory simulations, we reveal that the persistent luminescence in carbon nanodots is activated by a photooxidation-induced dioxetane intermediate, which can slowly release and convert energy into luminous emission via the steric hindrance effect of nanoparticles. With the persistent near-infrared luminescence, tissue penetration depth of 20 mm can be achieved. Thanks to the high signal-to-background ratio, biological safety and cancer-specific targeting ability of carbon nanodots, ultralong-afterglow guided surgery has been successfully performed on mice model to remove tumor tissues accurately, demonstrating potential clinical applications. These results may facilitate the development of long-lasting luminescent materials for precision tumor resection.

Heavy Atom Effect in Halogenated mCP and Its Influence on the Efficiency of the Thermally Activated Delayed Fluorescence of Dopant Molecules

In this study, we explore the impact of halogen functionalization on the photophysical properties of the commonly used organic light-emitting diode (OLED) host material, 1,3-bis(N-carbazolyl)benzene (mCP). Derivatives with different numbers and types of halogen substituents on mCP were synthesized. By measuring steady-state and transient photoluminescence at 6 K, we study the impact of the type, number, and position of the halogens on the intersystem crossing and phosphorescence rates of the compounds. In particular, the functionalization of mCP with 5 bromine atoms results in a significant increase of the intersystem crossing rate by a factor of 300 to a value of (1.5 ± 0.1) × 1010 s-1, and the phosphorescence rate increases by 2 orders of magnitude. We find that the singlet radiative decay rate is not significantly modified in any of the studied compounds. In the second part of the paper, we describe the influence of these compounds on the reverse intersystem crossing of the 7,10-bis(4-(diphenylamino)phenyl)-2,3-dicyanopyrazino-phenanthrene (TPA-DCPP), a TADF guest, via the external heavy atom effect. Their use results in an increase of the reverse intersystem crossing (RISC) rate from (8.1 ± 0.8) × 103 s-1 for mCP to (2.7 ± 0.1) × 104 s-1 for mCP with 5 bromine atoms. The effect is even more pronounced for the mCP analogue containing a single iodine atom, which gives a RISC rate of (3.3 ± 0.1) × 104 s-1. Time-dependent DFT calculations reveal the importance of the use of long-range corrected functionals to predict the effect of halogenation on the optical properties of the mCP, and the relativistic approximation (ZORA) is used to provide insight into the strength of the spin-orbit coupling matrix element between the lowest-lying excited singlet and triplet states in the different mCP compounds.

Reversible Boron-Insertion into Aromatic C-C Bonds

Formation of borabicyclo[3.2.0]heptadiene derivatives was achieved via boron-insertion into aromatic C-C bonds in the photo-promoted skeletal rearrangement reaction of triarylboranes bearing an ortho-phosphino substituent (ambiphilic phosphine-boranes). The borabicyclo[3.2.0]heptadiene derivatives were fully characterized by NMR and X-ray analyses. The dearomatized products were demonstrated to undergo the reverse reaction in the dark at room temperature, realizing photochemical and thermal interconversion between triarylboranes and boron-doped bicyclic systems. Experimental and theoretical studies revealed that sequential two electrocyclic reactions involving E/Z-isomerization of an alkene moiety proceed via a highly strained trans-borepin intermediate.

Non-Doped Blue AIEgen-Based OLED with EQE Approaching 10.3

Aggregation-induced emission (AIE) luminogens (AIEgens) are attractive for the construction of non-doped blue organic light-emitting diodes (OLEDs) owning to their high emission efficiency in the film state. However, the large internal inversion rate (kIC (Tn) ) between high-lying triplet levels (Tn ) and Tn-1 causes a huge loss of triplet excitons, resulting in dissatisfied device performance of these AIEgens-based non-doped OLEDs. Herein, we designed and synthesized a blue luminogen of DPDPB-AC by fusing an AIEgen of TPB-AC and a DMPPP, which feature hot exciton and triplet-triplet annihilation (TTA) up-conversion process, respectively. DPDPB-AC successfully inherits the AIE feature and excellent horizontal dipole orientation of TPB-AC. Furthermore, it owes smaller kIC (Tn) than TPB-AC. When DPDPB-AC was applied in OLED as non-doped emitting layer, an outstanding external quantum efficiency of 10.3 % and an exceptional brightness of 69311 cd m-2 were achieved. The transient electroluminescent measurements and steady-state dynamic analysis confirm that both TTA and hot exciton processes contribute to such excellent device performance. This work provides a new insight into the design of efficient organic fluorophores by managing high-lying triplet excitons.

Electrically driven organic laser using integrated OLED pumping

Organic semiconductors are carbon-based materials that combine optoelectronic properties with simple fabrication and the scope for tuning by changing their chemical structure1-3. They have been successfully used to make organic light-emitting diodes2,4,5 (OLEDs, now widely found in mobile phone displays and televisions), solar cells1, transistors6 and sensors7. However, making electrically driven organic semiconductor lasers is very challenging8,9. It is difficult because organic semiconductors typically support only low current densities, suffer substantial absorption from injected charges and triplets, and have additional losses due to contacts10,11. In short, injecting charges into the gain medium leads to intolerable losses. Here we take an alternative approach in which charge injection and lasing are spatially separated, thereby greatly reducing losses. We achieve this by developing an integrated device structure that efficiently couples an OLED, with exceptionally high internal-light generation, with a polymer distributed feedback laser. Under the electrical driving of the integrated structure, we observe a threshold in light output versus drive current, with a narrow emission spectrum and the formation of a beam above the threshold. These observations confirm lasing. Our results provide an organic electronic device that has not been previously demonstrated, and show that indirect electrical pumping by an OLED is a very effective way of realizing an electrically driven organic semiconductor laser. This provides an approach to visible lasers that could see applications in spectroscopy, metrology and sensing.

Centralized Excited States and Fast Radiation Transitions Reduce Laser Threshold in Carbon Dots

As a new type of solution-processed nano-laser material, carbon dots (CDs) have shown considerable potential in optical communication, laser displays, micro/nano processing, and biomedicine. Reducing the laser threshold of the gain material is of considerable significance for further development of CDs' applications in the field of micro/nano lasers. A series of blue-emissive CDs (B-CDs) are synthesized by changing the molar ratios of the precursors (citric acid (CA): L-Cysteine (L-Cys)). B-CDs have a structure of carbon nanoparticles with their surface being modified with 5-oxo-3,5-dihydro-2Hthiazolo [3,2-a]pyridine-7-carboxylic acid (TPCA). The laser can only be generated when the molar ratio of the precursors is between 1:1 and 2:1. With an increase in this ratio, the laser threshold decreases from 341.6 to 165.5 mJ cm^-2 . The decrease in the laser threshold is attributed to the increase in the radiation transition rate and centralized sp³ -related excited state levels, which are favorable for light amplification and population inversion. These results will be instructional for the reasonably design of CDs-based laser materials and prompt their potential use in practical photonics.

Toward Nonepitaxial Laser Diodes

Thin-film organic, colloidal quantum dot, and metal halide perovskite semiconductors are all being pursued in the quest for a wavelength-tunable diode laser technology that does not require epitaxial growth on a traditional semiconductor substrate. Despite promising demonstrations of efficient light-emitting diodes and low-threshold optically pumped lasing in each case, there are still fundamental and practical barriers that must be overcome to reliably achieve injection lasing. This review outlines the historical development and recent advances of each material system on the path to a diode laser. Common challenges in resonator design, electrical injection, and heat dissipation are highlighted, as well as the different optical gain physics that make each system unique. The evidence to date suggests that continued progress for organic and colloidal quantum dot laser diodes will likely hinge on the development of new materials or indirect pumping schemes, while improvements in device architecture and film processing are most critical for perovskite lasers. In all cases, systematic progress will require methods that can quantify how close new devices get with respect to their electrical lasing thresholds. We conclude by discussing the current status of nonepitaxial laser diodes in the historical context of their epitaxial counterparts, which suggests that there is reason to be optimistic for the future.

Triplets with a Twist: Ultrafast Intersystem Crossing in a Series of Electron Acceptor Materials Driven by Conformational Disorder

Control over the populations of singlet and triplet excitons is key to organic semiconductor technologies. In different contexts, triplets can represent an energy loss pathway that must be managed (i.e., solar cells, light-emitting diodes, and lasers) or provide avenues to improve energy conversion (i.e., photon upconversion and multiplication systems). A key consideration in the interplay of singlet and triplet exciton populations in these systems is the rate of intersystem crossing (ISC). In this work, we design, measure, and model a series of new electron acceptor molecules and analyze them using a combination of ultrafast transient absorption and ultrafast broadband photoluminescence spectroscopies. We demonstrate that intramolecular triplet formation occurs within several hundred picoseconds in solution and is accelerated considerably in the solid state. Importantly, ISC occurs with sufficient rapidity to compete with charge formation in modern organic solar cells, implicating triplets in intrinsic exciton loss channels in addition to charge recombination. Density functional theory calculations reveal that ISC occurs in triplet excited states characterized by local deviations from orbital π-symmetry associated with rotationally flexible thiophene rings. In disordered films, structural distortions, therefore, result in significant increases in spin-orbit coupling, enabling rapid ISC. We demonstrate the generality of this proposal in an oligothiophene model system where ISC is symmetry-forbidden and show that conformational disorder introduced by the formation of a solvent glass accelerates ISC, outweighing the lower temperature and increased viscosity. This proposal sheds light on the factors responsible for facile ISC and provides a simple framework for molecular control over spin states.

Highly efficient and nearly roll-off-free electrofluorescent devices via multiple sensitizations

The efficiency roll-off at high luminance has hindered the wide application of organic light-emitting diodes (OLEDs) for decades. To circumvent this issue, both high exciton utilization and short exciton residence should be satisfied, which, however, faces formidable challenges. Here, we propose an advanced approach of phosphor-assisted thermally activated delayed fluorophor (TADF)-sensitized fluorescence, abbreviated as TPSF. It is proved to be a rational strategy that can realize high quantum efficiency and elaborately accelerated radiative exciton consumption simultaneously by breaking singlet-triplet spin-flip cycles on a TADF host via multiple sensitizations. On the basis of a TADF molecule exhibiting anti-accumulation-caused quenching character, a proof-of-concept device exhibits a maximum external quantum efficiency (EQE_max) of 24.2% with an ultrahigh L_90% (the luminance at which EQE drops to 90% of its maximum value) of 190,500 cd m^-2 and a greatly improved operational stability, unlocking the full potential of OLEDs for ultrahigh-luminance applications.

Numerical Study of Triplet Dynamics in Organic Semiconductors Aimed for the Active Utilization of Triplets by TADF under Continuous-Wave Lasing

The limitation of lasing duration less than nanosecond order has been a major problem for realizing organic solid-state continues-wave (CW) lasers and organic semiconductor laser diodes. Triplets accumulation under CW excitation has been well recognized as a critical inhibiting factor. To overcome this issue, the utilization of thermally activated delayed fluorescence (TADF) emitters is a promising mechanism because of efficient reverse intersystem crossing. Herein, we model the triplet accumulation processes under lasing and propose the active utilization of TADF for lasing based on our simulation analysis. We used the rate constants experimentally determined from the optical properties of a boron difluoride curcuminoid fluorophore showing both TADF and lasing. We demonstrate that the intersystem crossing efficiency is gradually increased after the convergence of relaxation oscillation, i.e., terminating laser oscillation. In addition, we found that when the reverse intersystem crossing rate is close to the intersystem crossing rate, CW lasing becomes dominant.

Lifting Triplet Energy and Bipolar Characteristics by Limiting the Rotation of the Peripheral Groups in Host Materials to Achieve High-Efficiency Blue OLED

Bipolar host materials with high triplet energy are of great significance for highly efficient blue organic light-emitting diodes (OLEDs). In this work, three donor-acceptor-donor (D-A-D) type host materials with identical non-rigid diphenylsulfone center but differing in rotation degree of peripheral amino substituted derivatives from rotating freely diphenylamine (SODP) to rotating partially iminodibenzyl (SOId) and rotating restricted carbazole (SOCz) were designed and synthesized. It was demonstrated that the triplet energy (E_T ) level of the materials promoted by limiting the rotation degree of the peripheral groups, which was 2.72 eV for SODP, 2.73 eV for SOId and 2.78 eV for SOCz, respectively. Besides, the results of the single-carrier devices indicate SOCz possess better bipolar characteristic. Using FIrpic as guest emitter, the blue OLED with SOCz as host material exhibited superior device performance with a low turn-on voltage of 3.3 V, a maximum current efficiency (CE) of 30.1 cd A^-1 , a maximum power efficiency (PE) of 32.2 lm W^-1 , and a maximum external quantum efficiency (EQE) of 14.0%. This work provides a beneficial guideline for realizing promising host materials in efficient blue OLEDs.