Selective E to Z isomerization of 1,3-Dienes Enabled by A Dinuclear Mechanism

Exploring the synthesis, characterization, and corrosion inhibition of new tris-thiosemicarbazone derivatives for acidic steel settings using computational and experimental studies

A novel two tri-thiosemicarbazones derivatives, namely 2,2',2''-((2-Hydroxybenzene-1,3,5-triyl)tris(methanylylidene))tris(N-benzylhydrazine-1-carbothioamide) (HBC) and 2,2',2''-((2-hydroxybenzene-1,3,5-triyl) tris (methanylylidene)) tris (N-allylhydrazine-1-carbothioamide) (HAC), have been synthesized and their chemical structures were determined using different spectroscopic and analytical approaches. Then, utilizing methods including open circuit potential, potentiodynamic polarization, and electrochemical impedance spectroscopy, the inhibitory effect of the synthesized thiosemicarbazones on mild steel (MS) in an acidic environment (0.5 M H2SO4) was thoroughly investigated. Remarkably, raising the concentration of our recently synthesized tri-thiosemicarbazones HBC and HAC increased the inhibitory efficiency values. The η values of the two investigated tri-thiosemicarbazones derivatives (HAC and HBC), at each concentration are extremely high, and the maximum values of the efficiencies are 98.5% with HAC and 98.8% with HBC at the 800 ppm. The inhibitors adsorbed on the mild steel surface and generated a charge and mass movement barrier that protected the metal from hostile ions. According to polarization curves, HBC and HAC act as mixed-type inhibitors. Electrochemical impedance testing revealed a notable rise in charge transfer resistance (Rct) readings to 4930-Ω cm2, alongside a reduction in the Constant Phase Element (CPE) value to 5.81 μF, suggesting increased effectiveness in preventing corrosion. Also, density functional theory (DFT) was applied to investigate the assembled tri-thiosemicarbazones HBC and HAC. Moreover, the adsorption mechanism of HBC and HAC on the mild steel surface was explored using Monte Carlo simulation. Finally, the theoretical outputs were discovered to support the practical outcomes.

Regio- and Stereo-Selective Isomerization of Borylated 1,3-Dienes Enabled by Selective Energy Transfer Catalysis

Configurationally-defined dienes are pervasive across the bioactive natural product spectrum, where they typically manifest themselves as sorbic acid-based fragments. These C5 motifs reflect the biosynthesis algorithms that facilitate their construction. To complement established biosynthetic paradigms, a chemical platform to facilitate the construction of stereochemically defined, functionalizable dienes by light-enabled isomerization has been devised. Enabled by selective energy transfer catalysis, a variety of substituted β-boryl sorbic acid derivatives can be isomerized in a regio- and stereo-selective manner (up to 97 : 3). Directionality is guided by a stabilizing nO→pB interaction in the product: this constitutes a formal anti-hydroboration of the starting alkyne. This operationally simple reaction employs low catalyst loadings (1 mol %) and is complete in 1 h. X-ray analysis supports the hypothesis that the nO→pB interaction leads to chromophore bifurcation: this provides a structural foundation for selective energy transfer.

Photocatalytic Z/E isomerization unlocking the stereodivergent construction of axially chiral alkene frameworks

The past century has witnessed a large number of reports on the Z/E isomerization of alkenes. However, the vast majority of them are still limited to the isomerization of di- and tri-substituted alkenes. The stereospecific Z/E isomerization of tetrasubstituted alkenes remains to be an underdeveloped area, thus lacking in a stereodivergent synthesis of axially chiral alkenes. Herein we report the atroposelective synthesis of tetrasubstituted alkene analogues by asymmetric allylic substitution-isomerization, followed by their Z/E isomerization via triplet energy transfer photocatalysis. In this regard, the stereodivergent synthesis of axially chiral N-vinylquinolinones is achieved efficiently. Mechanistic studies indicate that the benzylic radical generation and distribution are two key factors for preserving the enantioselectivities of axially chiral compounds.

1,3-diene-based AIEgens: Stereoselective synthesis and applications

In recent years, significant advancements have been made in the synthesis and application of 1,3-dienes. This specific structural motif has garnered significant attention from researchers in materials science and biology due to its unique aggregation-induced emission (AIE) properties and extensive conjugation systems. The luminescent characteristics of these compounds are notably influenced by the geometry of the two double bonds. Therefore, it is essential to consolidate stereoselective synthetic strategies for 1,3-dienes. This comprehensive review seeks to elucidate the diverse techniques employed to attain stereo-control in the synthesis of 1,3-diene-based AIE luminogens (AIEgens). Particular emphasis is placed on comprehending the determinants of stereoselectivity and exploring the array of substrates amenable to these methods. Furthermore, the review underscores the AIE properties exhibited by these compounds and their extensive utility in organic light-emitting diodes (OLEDs), stimuli-responsive materials, sensors, bioimaging, and photodynamic therapy (PDT).

Remote-carbonyl-directed sequential Heck/isomerization/C(sp2)-H arylation of alkenes for modular synthesis of stereodefined tetrasubstituted olefins

Modular and regio-/stereoselective syntheses of all-carbon tetrasubstituted olefins from simple alkene materials remain a challenging project. Here, we demonstrate that a remote-carbonyl-directed palladium-catalyzed Heck/isomerization/C(sp2)-H arylation sequence enables unactivated 1,1-disubstituted alkenes to undergo stereoselective terminal diarylation with aryl iodides, thus offering a concise approach to construct stereodefined tetrasubstituted olefins in generally good yields under mild conditions; diverse carbonyl groups are allowed to act as directing groups, and various aryl groups can be introduced at the desired position simply by changing aryl iodides. The stereocontrol of the protocol stems from the compatibility between the E/Z isomerization and the alkenyl C(sp2)-H arylation, where the vicinal group-directed C(sp2)-H arylation of the Z-type intermediate product thermodynamically drives the reversible E to Z isomerization. Besides, the carbonyl group not only promotes the Pd-catalyzed sequential transformations of unactivated alkenes by weak coordination, but also avoids byproducts caused by other possible β-H elimination.

Thermally Activated Geometrical Regioselective E→Z Isomerization-Enabled Cascade Sequences of Conjugated Dienals: Experimental and DFT Studies

The geometrical regioselective E→Z isomerization of a conjugated alkene under thermal activation pose a challenge due to microscopic reversibility. Herein we report that such reversibility issues can be circumvented by integrating E→Z isomerization with subsequent cyclization cascade, particularly in the absence of commonly employed light, acids, or metal-catalysts. Thus, linearly conjugated dienals in a mixture of toluene-alcohol (2 : 1) solvents or only with alcohol at 60-70 °C can be converted to γ-alkoxybutenolides in moderate to good yields. The intermediary 2Z,4E-isomer can be isolated, which includes the first example of isolating the regioselective isomerization product under thermal conditions. Density functional theory (DFT) studies have been employed to shed light on the feasibility of geometrical alkene isomerization and ensuing cascade sequences. It has been observed that the regioselective 2E,4E→2Z,4E isomerization of dienal is a thermodynamically facile (ΔG <0) process. Structural elucidation further reveals that the presence of a certain charge transfer and a non-covalent interaction may be the primary reasons for the enhanced stability of the 2Z,4E-isomer. The thermodynamic plausibility of the subsequent cascade reaction from the Z-isomer to the anticipated product in the presence of a polar protic solvent (here MeOH) is also explicated. Out of the two probable pathways, the "hemiacetal pathway" involving a relay proton transfer is kinetically more feasible due to the diminished activation barrier than the "conjugate addition pathway".

Rh-coordinated histidyl bolaamphiphile assembly: a catalyst for the isomerization of cis-stilbene and cis-alkene

In this study, we present a colloidal assembly of histidyl bolaamphiphiles whose imidazoles coordinate with rhodium ions (HisC7[Rh]) to exhibit catalytic isomerization activity for cis-stilbene and cis-alkene molecules. The histidyl bolaamphiphiles self-assemble to form a soft scaffold that functions analogously to an apoenzyme. This scaffold exposes multiple histidyl imidazoles and carboxylates on its surface, to which rhodium ions bind, generating catalytically active sites. The Rh coordination with the biochemical functional groups was verified through comprehensive vibrational spectroscopy and calorimetry. The colloidal HisC7[Rh] demonstrated a significant catalytic effect on the isomerization of cis- to trans-stilbene under mild H2 conditions, resulting in 69% yield of trans-stilbene. In contrast, when Rh(cod)2BF4 was employed as a control catalyst, only the hydrogenated products of bibenzyl were obtained. These findings underscore the crucial role of histidyl motifs in exhibiting unique catalytic isomerization activity through the coordination with Rh. The catalytic activity of HisC7[Rh] is governed by several factors, such as rhodium content, solvent composition, temperature, and H2 pressure. Moreover, HisC7[Rh] displayed moderate isomerization activity towards not only stilbene but also unsaturated fatty acid isomers, highlighting its expansive potential as an isomerization catalyst.

Robust Synthesis of Terpenoid Scaffolds under Mn(I)-Catalysis

The 6/6/5-fused tricyclic scaffold is a central feature of structurally complex terpenoid natural products. A step-economical cascade transformation that leads to a complex molecular skeleton is regarded as a sustainable methodology. Therefore, we report the first Mn(I)-catalyzed C(sp²)-H chemoselective in situ dienylation and diastereoselective intramolecular Diels-Alder reaction using iso-pentadienyl carbonate to access 6/6/5-fused tricyclic scaffolds. To the best of our knowledge, there is no such report thus far to utilize iso-pentadienyl carbonate as a substrate in C-H activation catalysis. Extensive mechanistic studies, such as the isolation of catalytically active organo-manganese(I) complexes, 1,3-dienyl-intermediates, and isotopic labeling experiments have supported the proposed mechanism of this cascade reaction.

Selective Binding and Isomerization of Oximes in a Self-Assembled Capsule

A series of straight-chain (C7-C13) alkyl-O-methyl aldoximes (R-C(H)═NOMe) were synthesized with various functional groups at the remote ends (alkenes, halogen, -COOH, and NH₂). Their isomers about the C═N bond showed ∼60-40% E-Z-ratio in organic solutions. Surprisingly, their confinement in a water-soluble capsule with benzoselenodiazole walls shows high selectivity for the cis-/Z-isomer. Their relative affinities for the chalcogen-bonded capsule at room temperature depend mainly on the guest chain length and functional groups. A chain length of 14 heavy atoms showed especially high E- to Z-isomer selectivity (>99%) and was used in separation. The E-Z isomerization occurred only in the capsular cavity at room temperature and was accelerated 10-fold by sonication. The Z-isomer selective binding, separation, and E-Z isomerization are supported by NMR, DOSY, and computational studies.

Stereoconvergent Synthesis of Z-1,3-Disubstituted-1,3-Dienes by Uphill Photocatalysis

A variety of 1-aryl-1,3-dienes were isomerized from E to Z isomers by photocatalysis using Ru(bpy)₃ [PF₆ ]₂ and blue LED light. Enrichment of the Z-isomer is thought to occur by selective triplet energy transfer from the photocatalyst to the stereoisomeric mixture. The 1,3-diene starting materials are easily made by catalytic ene-yne metathesis (EYM). To access 1,3-diene Z-stereoisomers directly, a one pot procedure was developed. Additional 1,3-dienes were investigated for both isomerization and Z-enrichment. The combination of cross EYM with photocatalysis allows for the stereoconvergent synthesis of Z-1,3-dienes.

Cobalt-Catalyzed Z to E Geometrical Isomerization of 1,3-Dienes

An efficient cobalt-catalyzed geometrical isomerization of 1,3-dienes is described. In the combination of a CoCl₂ precatalyst with an amido-diphosphine-oxazoline ligand, the geometrical isomerization of E/Z mixtures of 1,3-dienes proceed in a stereoconvergent manner, affording (E) isomers in high stereoselectivity. This facile transformation features a broad substrate scope with good functional group tolerance and could be scaled up to the gram scale smoothly with a catalyst loading of 1 mol %.