Photopatterned microswimmers with programmable motion without external stimuli

Menthyl acetate powered self-propelled Janus sponge Marangoni motors with self-maintaining surface tension gradients and active mixing

HYPOTHESIS

Small scale Marangoni motors, which self-generate motion by inducing surface tension gradients on water interfaces through release of surface-active "fuels", have recently been proposed as self-powered mixing devices for low volume fluids. Such devices however, often show self-limiting lifespans due to the rapid saturation of surface-active agents. A potential solution to this is the use volatile surface-active agents which do not persist in their environment. Here we investigate menthyl acetate (MA) as a safe, inexpensive and non-persistent fuel for Marangoni motors.

EXPERIMENTS

MA was loaded asymmetrically into millimeter scale silicone sponges. Menthyl acetate reacts slowly with water to produce the volatile surface-active menthol, which induces surface tension gradients across the sponge to drive motion by the Marangoni effect. Videos were taken and trajectories determined by custom software. Mixing was assessed by the ability of Marangoni motors to homogenize milliliter scale aqueous solutions containing colloidal sediments.

FINDINGS

Marangoni motors, loaded with asymmetric "Janus" distributions of menthyl acetate show velocities and rotational speeds up to 30 mm s-1 and 500 RPM respectively, with their functional lifetimes scaling linearly with fuel volume. We show these devices are capable of enhanced mixing of solutions at orders of magnitude greater rates than diffusion alone.

Vibration-Induced-Flow Mechanism and Its Application in Water Surface Robot

Vibration is a common strategy for aquatic organisms to achieve their life activities, especially at the air-water interface. For the locomotion of small creatures, the organs with plate features are often used on water surfaces, which inspires relevant studies about using thin plates for robot propulsions. However, the influence of the general deformations of thin plates on the generated flow fields has not been considered. Here, a comprehensive investigation is conducted about the flow fields that arose by vibrations of thin plates and the potential as locomotion strategies are explored. It is discovered that as thin plates are subjected to vibration excitations on the water surface, the produced flow fields are mainly determined by the vibration shapes, and the influence rules of plate deformations on the flow fields are identified. The main factors producing asymmetric flow fields are analyzed to realize the morphology control of the flow fields. Then, to determine effective locomotion strategies on the water surface, the flow fields stimulated by integrated vibration exciters are explored, and 2 water surface robots are developed consequentially, which exhibit superior motion performance. This work reveals the basic rules of the vibration-induced-flow mechanism by thin plates and establishes new locomotion strategies for aquatic robots.

Electricity-Driven Strategies for Bioinspired Multifunctional Swimming Marangoni Robots Based on Super-Aligned Carbon Nanotube Composites

Marangoni actuators that are propelled by surface tension gradients hold significant potential in small-scale swimming robots. Nevertheless, the release of "fuel" for conventional chemical Marangoni actuators is not easily controllable, and the single swimming function also limits application areas. Constructing controllable Marangoni robots with multifunctions is still a huge challenge. Herein, inspired by water striders, electricity-driven strategies are proposed for a multifunctional swimming Marangoni robot (MSMR), which is fabricated by super-aligned carbon nanotube (SACNT) and polyimide (PI) composite. The MSMR consists of a Marangoni actuator and air-ambient actuators. Owing to the temperature gradient generated by the electrical stimulation on the water surface, the Marangoni actuators can swim controllably with linear, turning, and rotary motions, mimicking the walking motion of water striders. In addition, the Marangoni actuators can also be driven by light. Importantly, the air-ambient actuators fabricated by SACNT/PI bilayer structures demonstrate the function of grasping objects on the water surface when electrically Joule-heated, mimicking the predation behavior of water striders. With the synergistic effect of the Marangoni actuator and air-ambient actuators, the MSMR can navigate mazes with tunnels and grasp objects. This research will provide a new inspiration for smart actuators and swimming robots.

Time-traceable micro-taggants for anti-counterfeiting and secure distribution of food and medicines

This study presents an innovative solution for the enhanced tracking and security of pharmaceuticals through the development of microstructures incorporating environmentally responsive, coded microparticles. Utilizing maskless photolithography, we engineered these microparticles with a degradable masking layer with 30 μm thickness that undergoes controlled dissolution. Quantitative analysis revealed that the protective layer's degradation, monitored by red fluorescence intensity, diminishes predictably over 144 h in phosphate-buffered saline under physiological conditions. This degradation not only confirms the microparticles' integrity but also allows the extraction of encoded information, which can serve as a robust indicator of medicinal shelf life and a deterrent to tampering. These findings indicate the potential for applying this technology in real-time monitoring of pharmaceuticals, ensuring quality and authenticity in the supply chain.

Lipid vesicle-based molecular robots

A molecular robot, which is a system comprised of one or more molecular machines and computers, can execute sophisticated tasks in many fields that span from nanomedicine to green nanotechnology. The core parts of molecular robots are fairly consistent from system to system and always include (i) a body to encapsulate molecular machines, (ii) sensors to capture signals, (iii) computers to make decisions, and (iv) actuators to perform tasks. This review aims to provide an overview of approaches and considerations to develop molecular robots. We first introduce the basic technologies required for constructing the core parts of molecular robots, describe the recent progress towards achieving higher functionality, and subsequently discuss the current challenges and outlook. We also highlight the applications of molecular robots in sensing biomarkers, signal communications with living cells, and conversion of energy. Although molecular robots are still in their infancy, they will unquestionably initiate massive change in biomedical and environmental technology in the not too distant future.

Modulating photothermocapillary interactions for logic operations at the air-water interface

We demonstrate a system for performing logical operations (OR, AND, and NOT gates) at the air-water interface based on Marangoni optical trapping and repulsion between photothermal particles. We identify a critical separation distance at which the trapped particle assemblies become unstable, providing insight into the potential for scaling to larger arrays of logic elements.

Using Footpad Sculpturing to Enhance the Maneuverability and Speed of a Robotic Marangoni Surfer

From insects to arachnids to bacteria, the surfaces of lakes and ponds are teaming with life. Many modes of locomotion are employed by these organisms to navigate along the air-water interface, including the use of lipid-laden excretions that can locally change the surface tension of the water and induce a Marangoni flow. In this paper, we improved the speed and maneuverability of a miniature remote-controlled robot that mimics insect locomotion using an onboard tank of isopropyl alcohol and a series of servomotors to control both the rate and location of alcohol release to both propel and steer the robot across the water. Here, we studied the effect of a series of design changes to the foam rubber footpads, which float the robot and are integral in efficiently converting the alcohol-induced surface tension gradients into propulsive forces and effective maneuvering. Two designs were studied: a two-footpad design and a single-footpad design. In the case of two footpads, the gap between the two footpads was varied to investigate its impact on straight-line speed, propulsion efficiency, and maneuverability. An optimal design was found with a small but finite gap between the two pads of 7.5 mm. In the second design, a single footpad without a central gap was studied. This footpad had a rectangular cut-out in the rear to capture the alcohol. Footpads with wider and shallower cut-outs were found to optimize efficiency. This observation was reinforced by the predictions of a simple theoretical mechanical model. Overall, the optimized single-footpad robot outperformed the two-footpad robot, producing a 30% improvement in speed and a 400% improvement in maneuverability.

Pen-drawn Marangoni swimmer

Pen-drawing is an intuitive, convenient, and creative fabrication method for delivering emergent and adaptive design to real devices. To demonstrate the application of pen-drawing to robot construction, we developed pen-drawn Marangoni swimmers that perform complex programmed tasks using a simple and accessible manufacturing process. By simply drawing on substrates using ink-based Marangoni fuel, the swimmers demonstrate advanced robotic motions such as polygon and star-shaped trajectories, and navigate through maze. The versatility of pen-drawing allows the integration of the swimmers with time-varying substrates, enabling multi-step motion tasks such as cargo delivery and return to the original place. We believe that our pen-based approach will significantly expand the potential applications of miniaturized swimming robots and provide new opportunities for simple robotic implementations.

A Multi-engine Marangoni Rotor with Controlled Motion for Mini-Generator Application

Marangoni rotors are smart devices that are capable of self-propulsive motions based on the Marangoni effect, namely interfacial flows caused by a gradient of surface tension. Owing to the features of untethered motions and coupled complexity with fluid, these Marangoni devices are attractive for both theoretical study and applications in biomimicking, cargo delivery, energy conversion, etc. However, the controllability of Marangoni motions dependent on concentration gradients remains to be improved, including the motion lifetime, direction, and trajectories. The challenge lies in the flexible loading and adjustments of surfactant fuels. Herein, we design a multi-engine device in a six-arm shape with multiple fuel positions allowing for motion control and propose a strategy of diluting the surfactant fuel to prolong the motion lifetime. The resulting motion lifetime has been extended from 140 to 360 s by 143% compared with conventional surfactant fuels. The motion trajectories could be facilely adjusted by changing both the fuel number and positions, leading to diverse rotation patterns. By integrating with a coil and a magnet, we obtained a system of mini-generators based on the Marangoni rotor. Compared with the single-engine case, the output of the multi-engine rotor was increased by 2 magnitudes owing to increased kinetic energy. The design of the above Marangoni rotor has addressed the problems of concentration-gradient-driven Marangoni devices and enriched their applications in harvesting energy from the environment.

Small-Scale Robotics with Tailored Wettability

Small-scale robots (SSRs) have emerged as promising and versatile tools in various biomedical, sensing, decontamination, and manipulation applications, as they are uniquely capable of performing tasks at small length scales. With the miniaturization of robots from the macroscale to millimeter-, micrometer-, and nanometer-scales, the viscous and surface forces, namely adhesive forces and surface tension have become dominant. These forces significantly impact motion efficiency. Surface engineering of robots with both hydrophilic and hydrophobic functionalization presents a brand-new pathway to overcome motion resistance and enhance the ability to target and regulate robots for various tasks. This review focuses on the current progress and future perspectives of SSRs with hydrophilic and hydrophobic modifications (including both tethered and untethered robots). The study emphasizes the distinct advantages of SSRs, such as improved maneuverability and reduced drag forces, and outlines their potential applications. With continued innovation, rational surface engineering is expected to endow SSRs with exceptional mobility and functionality, which can broaden their applications, enhance their penetration depth, reduce surface fouling, and inhibit bacterial adhesion.

High-performance Marangoni hydrogel rotors with asymmetric porosity and drag reduction profile

Miniaturized rotors based on Marangoni effect have attracted great attentions due to their promising applications in propulsion and power generation. Despite intensive studies, the development of Marangoni rotors with high rotation output and fuel economy remains challenging. To address this challenge, we introduce an asymmetric porosity strategy to fabricate Marangoni rotor composed of thermoresponsive hydrogel and low surface tension anesthetic metabolite. Combining enhanced Marangoni propulsion of asymmetric porosity with drag reduction of well-designed profile, our rotor precedes previous studies in rotation output (~15 times) and fuel economy (~34% higher). Utilizing thermoresponsive hydrogel, the rotor realizes rapid refueling within 33 s. Moreover, iron-powder dopant further imparts the rotors with individual-specific locomotion in group under magnetic stimuli. Significantly, diverse functionalities including kinetic energy transmission, mini-generator and environmental remediation are demonstrated, which open new perspectives for designing miniaturized rotating machineries and inspire researchers in robotics, energy, and environment.

Recent Advances in Polymer Additive Engineering for Diagnostic and Therapeutic Hydrogels

Hydrogels are hydrophilic polymer materials that provide a wide range of physicochemical properties as well as are highly biocompatible. Biomedical researchers are adapting these materials for the ever-increasing range of design options and potential applications in diagnostics and therapeutics. Along with innovative hydrogel polymer backbone developments, designing polymer additives for these backbones has been a major contributor to the field, especially for expanding the functionality spectrum of hydrogels. For the past decade, researchers invented numerous hydrogel functionalities that emerge from the rational incorporation of additives such as nucleic acids, proteins, cells, and inorganic nanomaterials. Cases of successful commercialization of such functional hydrogels are being reported, thus driving more translational research with hydrogels. Among the many hydrogels, here we reviewed recently reported functional hydrogels incorporated with polymer additives. We focused on those that have potential in translational medicine applications which range from diagnostic sensors as well as assay and drug screening to therapeutic actuators as well as drug delivery and implant. We discussed the growing trend of facile point-of-care diagnostics and integrated smart platforms. Additionally, special emphasis was given to emerging bioinformatics functionalities stemming from the information technology field, such as DNA data storage and anti-counterfeiting strategies. We anticipate that these translational purpose-driven polymer additive research studies will continue to advance the field of functional hydrogel engineering.

Anti-Counterfeiting Tags Using Flexible Substrate with Gradient Micropatterning of Silver Nanowires

Anti-counterfeiting technologies for small products are being developed. We present an anti-counterfeiting tag, a grayscale pattern of silver nanowires (AgNWs) on a flexible substrate. The anti-counterfeiting tag that is observable with a thermal imaging camera was fabricated using the characteristics of silver nanowires with high visible light transmittance and high infrared emissivity. AgNWs were patterned at microscale via a maskless lithography method using UV dicing tape with UV patterns. By attaching and detaching an AgNW coated glass slide and UV dicing tape irradiated with multiple levels of UV, we obtained AgNW patterns with four or more grayscales. Peel tests confirmed that the adhesive strength of the UV dicing tape varied according to the amount of UV irradiation, and electrical resistance and IR image intensity measurements confirmed that the pattern obtained using this tape has multi-level AgNW concentrations. When applied for anti-counterfeiting, the gradient-concentration AgNW micropattern could contain more information than a single-concentration micropattern. In addition, the gradient AgNW micropattern could be transferred to a flexible polymer substrate using a simple method and then attached to various surfaces for use as an anti-counterfeiting tag.

A remotely controlled Marangoni surfer

Inspired by creatures that have naturally mastered locomotion on the air-water interface, we developed and built a self-powered, remotely controlled surfing robot capable of traversing this boundary by harnessing surface tension modification for both propulsion and steering through a controlled release of isopropyl alcohol. In this process, we devised and implemented novel release valve and steering mechanisms culminating in a surfer with distinct capabilities. Our robot measures about 110 mm in length and can travel as fast as 0.8 body length per second. Interestingly, we found that the linear speed of the robot follows a 1/3 power law with the release rate of the propellant. Additional maneuverability tests also revealed that the robot is able to withstand 20 mm s^-2in centripetal acceleration while turning. Here, we thoroughly discuss the design, development, performance, overall capabilities, and ultimate limitations of our robotic surfer.