Manipulating crystallization dynamics through chelating molecules for bright perovskite emitters

Enhancing Efficiency and Durability of Perovskite Solar Cells With Chlorine-Functionalized Fully Conjugated Porous Aromatic Framework

Non-radiative recombination, caused by trap states, significantly hampers the efficiency and stability of perovskite solar cells (PSCs). The emerging porous organic polymers (POPs) show promise as a platform for designing novel defect passivation agents due to their rigid and porous structure. However, the POPs reported so far lack either sufficient stability or clear sites of interactions with the defects. Herein, two chlorine-functionalized, fully conjugated porous aromatic frameworks (PAFs) were constructed via a decarbonylation reaction. The chlorinated PAFs feature unique long-range conjugated networks bearing multiple chlorine atoms, significantly improving the photovoltaic performance and stability of doped solar cells. Combined experimental and theoretical analyses confirmed the strong passivation effects of conjugated structure to the defect through Cl sites. Specifically, PAF-159, bearing a triphenylamine moiety, demonstrated stronger Cl-Pb bonding and higher passivation efficiency due to the presence of π* anti-bonding orbitals, which elevate the HOMO energy level and facilitate Cl-Pb charge transfer. Consequently, we obtained high-performance PAF-159-doped devices with advanced PCE (24.3 %), good storage stability (retaining 86 % after 3000 hours), and good long-term operational stability (retaining 92 % after 350 hours).

Solvent-Activated Transformation of Polymer Configurations for Advancing the Interfacial Reliability of Perovskite Photovoltaics

Organic materials have been widely used as the charge transport layers in perovskite solar cells due to their structural versatility and solution processability. However, their low surface energy usually causes unsatisfactory thin-film wettability in contact with the perovskite solution, which limits the interfacial performance of the photovoltaic devices. Although solvent post-treatment could occasionally regulate the wetting behavior of organic films, the mechanism of the solid-liquid interaction is still unclear. Here, we present evidence of a possible correlation between the solvent and the wettability of a conventional polymer, poly[bis(4-phenyl) (2,4,6-trimethylphenyl) amine] (PTAA), and reveal the critical roles of Hansen solubility parameters (HSPs) of solvents in wetting mechanisms. Our results suggest that the conventional solvent N,N-dimethylformamide (DMF) improves the wettability of PTAA by the morphological disruption mechanism but negatively impacts interfacial charge collection and stability. In contrast, 2-methoxyethanol (2-Me) with an appropriate HSP value induces the transformation of the PTAA configuration in an orderly manner, which simultaneously improves the wetting property and maintains the film topography. After careful optimization of the surface conformation of the PTAA film, both perovskite crystallization and interfacial compatibility have been enhanced. Benefiting from superior interfacial properties, the perovskite solar cells based on 2-Me deliver a champion efficiency of 24.15% compared to 21.4% for DMF-based ones. More encouragingly, the use of 2-Me minimizes the perovskite buried interfacial defects, enabling the unencapsulated devices to maintain about 95% of their initial efficiencies after light illumination for 1100 h. The present study demonstrates the high effectiveness of solvent-polymer interaction for adjusting interfacial properties and strengthening the robustness of perovskite solar cells.

Advances and Challenges in Large-Area Perovskite Light-Emitting Diodes

Metal halide perovskite light-emitting diodes (PeLEDs) have shown promise for high-definition displays and flat-panel lighting because of their wide color gamut, narrow emission band, and high brightness. The external quantum efficiency of PeLEDs increased rapidly from ≈1% to more than 25% in the past few years. However, most of these high-performance devices are fabricated using a spin coating method with a small device area of <0.1 cm2, limiting their commercial applications. Recently, large-area PeLEDs have attracted growing attention and significant breakthroughs have been reported. This perspective first introduces the pros and cons of each technique in making large-area PeLEDs. The advances in the fabrication of large-area PeLEDs are then summarized using spin coating and mass-production methods such as inkjet printing, blade coating, and thermal evaporation. Moreover, the challenging issues will be discussed that are urgent to be solved for large-area PeLEDs.

Lead-Chelating Intermediate for Air-Processed Phase-Pure FAPbI3 Perovskite Solar Cells

Formamidinium-lead triiodide (FAPbI3) perovskite holds promise as a prime candidate in the realm of perovskite photovoltaics. However, the photo-active α-FAPbI3 phase, existing as a metastable state, is observable solely at elevated temperatures and is susceptible to degradation into the δ-phase in ambient air. Therefore, the attainment of phase-stable α-FAPbI3 in ambient conditions has become a crucial objective in perovskite research. Here, we proposed an efficient conversion process of PbI2 into the α-FAPbI3 perovskites in ambient air. This conversion was facilitated by the introduction of chelating molecules, which interacted with PbI2 to form an intermediate phase. Due to the reduced formation barrier resulting from the altered reaction pathway, this stable intermediate phase transitioned directly into α-FAPbI3 upon the deposition of the organic cation solution, effectively bypassing the formation of δ-FAPbI3. Consequently, the ambient-fabricated FAPbI3 perovskite solar cells (PSCs) exhibited an outstanding power conversion efficiency of 25.08 %, along with a high open-circuit voltage of 1.19 V. Furthermore, the unencapsulated devices demonstrated remarkable environmental stability. Notably, this innovative approach promises broad applicability across various chelating molecules, opening new avenues for further progress in the ambient air fabrication of FAPbI3 PSCs.

Unveiling the Carrier Dynamics of Perovskite Light-Emitting Diodes via Transient Electroluminescence

Perovskite light-emitting diodes (PeLEDs) have garnered significant attention due to their outstanding optoelectronic properties. However, investigating carrier transport and recombination behavior during device operation poses persistent challenges. In this study, we explore the impact of additive and interface engineering on device performance using transient electroluminescence (TREL). Polyethylene glycol (PEG) induces the formation of square-faceted nanocrystals with a homogeneous size distribution and extended fluorescence lifetime. Consequently, these PeLEDs exhibit remarkable stability. Additionally, employing an electron transport layer of 2,4,6-tris[3-(diphenylphosphino)phenyl]-1,3,5-triazine (PO-T2T), which has a better match to the energy bands of the perovskite layer and a higher carrier mobility, allows for lower turn-on voltage and faster response but also suffers from a short decay time and poor stability. Moreover, low-temperature TREL characterization shows that the carrier mobility is also significantly suppressed with decreasing temperature, which reduces the transient response speed.

Efficient Perovskite Nanograin Light-Emitting Diodes in Green-to-Blue Gamut with Co-Additive Engineering

Perovskite nanograins exceeding the Bohr exciton diameter show great potential for high-performance light-emitting diodes (LEDs) owing to their bandgap homogeneity, spatial charge confinement, and nonlocal interaction. However, it is challenging to directly synthesize proper nanograins along with reduced crystal defects on functional substrate, and the corresponding high-efficiency perovskite LEDs (PeLEDs) have rarely been reported. In this study, crystallization modulation for perovskites with an effective co-additive system, including lithium bromide, p-fluorophenethylammonium bromide, and 18-crown-6, is performed. Furthermore, it is demonstrated that the proposed co-additive system can synergistically retard perovskite crystallization and reduce crystal defects. Consequently, high-quality perovskite nanograin solids (≈22.8 nm) are obtained with a high photoluminescence quantum yield (≈88%). These superior optical properties contribute to developing efficient green PeLEDs with a champion external quantum efficiency (EQE) of 28.4% and an average EQE of 27.1%. The co-additive system can be universally applied to mixed-halide perovskite nanograin LED, presenting a maximum EQE of 24.4%, 21.6%, 17.5%, and 11.1% for the blue device at 496, 488, 478, and 472 nm, respectively, along with a narrow spectral linewidth (17-14 nm) and stable color. These results supplement the research on high-efficiency perovskite nanograin LEDs for multicolor displays and lighting.

Colloidal Zeta Potential Modulation as a Handle to Control the Crystallization Kinetics of Tin Halide Perovskites for Photovoltaic Applications

Tin halide perovskites (THPs) have demonstrated exceptional potential for various applications owing to their low toxicity and excellent optoelectronic properties. However, the crystallization kinetics of THPs are less controllable than its lead counterpart because of the higher Lewis acidity of Sn2+, leading to THP films with poor morphology and rampant defects. Here, a colloidal zeta potential modulation approach is developed to improve the crystallization kinetics of THP films inspired by the classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. After adding 3-aminopyrrolidine dihydro iodate (APDI2) in the precursor solution to change the zeta potential of the pristine colloids, the total interaction potential energy between colloidal particles with APDI2 could be controllably reduced, resulting in a higher coagulation probability and a lower critical nuclei concentration. In situ laser light scattering measurements confirmed the increased nucleation rate of the THP colloids with APDI2. The resulting film with APDI2 shows a pinhole-free morphology with fewer defects, achieving an impressive efficiency of 15.13 %.

Kinetically Controlled Synthesis of Quasi-Square CsPbI3 Nanoplatelets with Excellent Stability

Nanoplatelets (NPLs) share excellent luminescent properties with their symmetric quantum dots counterparts and entail special characters benefiting from the shape, like the thickness-dependent bandgap and anisotropic luminescence. However, perovskite NPLs, especially those based on iodide, suffer from poor spectral and phase stability. Here, stable CsPbI3 NPLs obtained by accelerating the crystallization process in ambient-condition synthesis are reported. By this kinetic control, the rectangular NPLs into quasi-square NPLs are tuned, where enlarged width endows the NPLs with a lower surface-area-to-volume ratio (S/V ratio), leading to lower surficial energy and thus improved endurance against NPL fusion (cause for spectral shift or phase transformation). The accelerated crystallization, denoting the fast nucleation and short period of growth in this report, is enabled by preparing a precursor with complete transformation of PbI2 into intermediates (PbI3 -), through an additional iodide supplier (e.g., zinc iodide). The excellent color stability of the materials remains in the light-emitting diodes under various bias stresses.

Pressure-Modulated Interface Engineering toward Realizing Core@Shell Configuration Transition

The strained interface of core@shell nanocrystals (NCs) can effectively modulate the energy level alignment, thereby significantly affecting the optical properties. Herein, the unique photoluminescence (PL) response of doped Mn ions is introduced as a robust probe to detect the targeted pressure-strain relation of CdS@ZnS NCs. Results show that the core experiences actually less pressure than the applied external pressure, attributed to the pressure-induced optimized interface that reduces the compressive strain on core. The pressure difference between core and shell increases the conduction band and valence band offsets and further achieves the core@shell configuration transition from quasi type II to type I. Accordingly, the PL intensity of CdS@ZnS NCs slightly increases, along with a faster blue-shift rate of PL peak under low pressure. This study elucidates the interplay between external physical pressure and interfacial chemical stress for core@shell NCs, leading to precise construction of interface engineering for practical applications.

Role of chloride on the instability of blue emitting mixed-halide perovskites

Although perovskite light-emitting diodes (PeLEDs) have seen unprecedented development in device efficiency over the past decade, they suffer significantly from poor operational stability. This is especially true for blue PeLEDs, whose operational lifetime remains orders of magnitude behind their green and red counterparts. Here, we systematically investigate this efficiency-stability discrepancy in a series of green- to blue-emitting PeLEDs based on mixed Br/Cl-perovskites. We find that chloride incorporation, while having only a limited impact on efficiency, detrimentally affects device stability even in small amounts. Device lifetime drops exponentially with increasing Cl-content, accompanied by an increased rate of change in electrical properties during operation. We ascribe this phenomenon to an increased mobility of halogen ions in the mixed-halide lattice due to an increased chemically and structurally disordered landscape with reduced migration barriers. Our results indicate that the stability enhancement for PeLEDs might require different strategies from those used for improving efficiency.

Understanding the Role of Fluorine Groups in Passivating Defects for Perovskite Solar Cells

Introducing fluorine (F) groups into a passivator plays an important role in enhancing the defect passivation effect for the perovskite film, which is usually attributed to the direct interaction of F and defect states. However, the interaction between electronegative F and electron-rich passivation groups in the same molecule, which may influence the passivation effect, is ignored. We herein report that such interactions can vary the electron cloud distribution around the passivation groups and thus changing their coordination with defect sites. By comparing two fluorinated molecules, heptafluorobutylamine (HFBM) and heptafluorobutyric acid (HFBA), we find that the F/-NH2 interaction in HFBM is stronger than the F/-COOH one in HFBA, inducing weaker passivation ability of HFBM than HFBA. Accordingly, HFBA-based perovskite solar cells (PSCs) provide an efficiency of 24.70 % with excellent long-term stability. Moreover, the efficiency of a large-area perovskite module (14.0 cm2 ) based on HFBA reaches 21.13 %. Our work offers an insight into understanding an unaware role of the F group in impacting the passivation effect for the perovskite film.

Managing Excess Lead Iodide with Ordered Distribution and Reduced Photoactivity via Chelating Ligands for Stable Inverted Perovskite Solar Cells

Excess lead iodide (PbI2) aggregates distributed in perovskite photoreactive absorbers will perturb carrier collection and become a key source of instability in PSCs. Herein, a multisite heterocyclic ligand of 2-mercaptonicotinic acid (2-MNA) is introduced as a chelating agent to manage excess PbI2 in inverted PSCs. The chelating coordination of 2-MNA to Pb2+ ions through the carbonyl, sulfhydryl, and pyridinyl groups enables a high-quality perovskite film with reduced PbI2 aggregates and the formation of an ordered distribution at grain boundaries. Moreover, the coordination of 2-MNA with the [PbX6]4- octahedron effectively inhibits the photodecomposition of PbI2-rich perovskites, thus preventing the generation of metallic lead (Pb0) and iodine (I2) species in response to environmental stimuli. As a result, the inverted PSC based on a 2-MNA modified triple cation perovskite photoactive layer achieves a PCE of 21.27% and a fill factor of 82.07%, accompanied by improved thermal and photostability.

Enrichment of anchoring sites by introducing supramolecular halogen bonds for the efficient perovskite nanocrystal LEDs

Considering the multi-functionalization of ligands, it is crucial for ligand molecular design to reveal the landscape of anchoring sites. Here, a typical triphenylphosphine (TPP) ligand was employed to explore its effect on the surface of CsPbI3 perovskite nanocrystals (PNCs). Except for the conventionally considered P-Pb coordination, an P-I supramolecular halogen bonding was also found on the NC surface. The coexistence of the above two types of bonding significantly increased the formation energy of iodine vacancy defects and improved the photoluminescence quantum yield of PNCs up to 93%. Meanwhile, the direct interaction of P and I enhanced the stability of the Pb-I octahedra and dramatically inhibited the migration of I ions. Furthermore, the introduction of additional benzene rings (2-(Diphenylphosphino)-biphenyl (DPB)) increased the delocalized properties of the PNC surface and significantly improved the charge transport of the PNCs. As a result, the DPB passivated CsPbI3 NCs based top-emitting LEDs exhibite a peak external quantum efficiency (EQE) of 22.8%, a maximum luminance of 15, 204 cd m-2, and an extremely low-efficiency roll-off of 2.6% at the current density of 500 mA cm-2.

Realizing High Brightness Quasi-2D Perovskite Light-Emitting Diodes with Reduced Efficiency Roll-Off via Multifunctional Interface Engineering

Quasi-2D perovskites have recently flourished in the field of luminescence due to the quantum-confinement effect and the efficient energy transfer between different n phases resulting in exceptional optical properties. However, owing to the lower conductivity and poor charge injection, quasi-2D perovskite light-emitting diodes (PeLEDs) typically suffer from low brightness and high-efficiency roll-off at high current densities compared to 3D perovskite-based PeLEDs, which is undoubtedly one of the most critical issues in this field. In this work, quasi-2D PeLEDs with high brightness, reduced trap density, and low-efficiency roll-off are successfully demonstrated by introducing a thin layer of conductive phosphine oxide at the perovskite/electron transport layer interface. The results surprisingly show that this additional layer does not improve the energy transfer between multiple quasi-2D phases in the perovskite film, but purely improves the electronic properties of the perovskite interface. On the one hand, it passivates the surface defects of the perovskite film; on the other hand, it promotes electron injection and prevents hole leakage across this interface. As a result, the modified quasi-2D pure Cs-based device shows a maximum brightness of > 70,000 cd m-2 (twice that of the control device), a maximum external quantum efficiency (EQE) of > 10% and a much lower efficiency roll-off at high bias voltages.

All-inorganic perovskite solar cells featuring mixed group IVA cations

All-inorganic perovskites are promising for solar cells owing to their potentially superior tolerance to environmental factors, as compared with their hybrid organic-inorganic counterparts. Over the past few years, all-inorganic perovskite solar cells (PSCs) have seen a dramatic improvement in certified power conversion efficiencies (PCEs), demonstrating their great potential for practical applications. Pb, Sn, and Ge are the most studied group IVA elements for perovskites. These group IVA cations share the same number of valence electrons and similarly exhibit the beneficial antibonding properties of lone-pair electrons when incorporated in the perovskite structure. Meanwhile, mixing these cations in all-inorganic perovskites provides opportunities for stabilizing the photoactive phase and tailoring the bandgap structure. In this mini-review, we analyze the structural and bandgap design principles for all-inorganic perovskites featuring mixed group IVA cations, discuss the updated progress in the corresponding PSCs, and finally provide perspectives on future research efforts faciliating the continued development of high-performance Pb-less and Pb-free all-inorganic PSCs.

Orientated crystallization of FA-based perovskite via hydrogen-bonded polymer network for efficient and stable solar cells

Incorporating mixed ion is a frequently used strategy to stabilize black-phase formamidinum lead iodide perovskite for high-efficiency solar cells. However, these devices commonly suffer from photoinduced phase segregation and humidity instability. Herein, we find that the underlying reason is that the mixed halide perovskites generally fail to grow into homogenous and high-crystalline film, due to the multiple pathways of crystal nucleation originating from various intermediate phases in the film-forming process. Therefore, we design a multifunctional fluorinated additive, which restrains the complicated intermediate phases and promotes orientated crystallization of α-phase of perovskite. Furthermore, the additives in-situ polymerize during the perovskite film formation and form a hydrogen-bonded network to stabilize α-phase. Remarkably, the polymerized additives endow a strongly hydrophobic effect to the bare perovskite film against liquid water for 5 min. The unencapsulated devices achieve 24.10% efficiency and maintain >95% of the initial efficiency for 1000 h under continuous sunlight soaking and for 2000 h at air ambient of ~50% humid, respectively.

Zwitterions Narrow Distribution of Perovskite Quantum Wells for Blue Light-Emitting Diodes with Efficiency Exceeding 15

While quasi-two-dimensional (quasi-2D) perovskites have emerged as promising semiconductors for light-emitting diodes (LEDs), the broad-width distribution of quantum wells hinders their efficient energy transfer and electroluminescence performance in blue emission. In particular, the underlying mechanism is closely related to the crystallization kinetics and has yet to be understood. Here for the first time, the influence of bifunctional zwitterions with different coordination affinity on the crystallization kinetics of quasi-2D perovskites is systematically investigated. The zwitterions can coordinate with Pb²⁺ and also act as co-spacer organic species in quasi-2D perovskites, which collectively inhibit the aggregation of colloidal precursors and shorten the distance of quantum wells. Consequently, restricted nucleation of high-n phases and promoted growth of low-n phases are achieved with moderately coordinated zwitterions, leading to the final film with a more concentrated n distribution and improved energy transfer efficiency. It thus enables high-efficiency blue LEDs with a recorded external quantum efficiency of 15.6% at 490 nm, and the operation stability has also been prolonged to 55.3 min. These results provide useful directions for tuning the crystallization kinetics of quasi-2D perovskites, which is expected to lead to high-performance perovskite LEDs.

Weakening Ligand-Liquid Affinity to Suppress the Desorption of Surface-Passivated Ligands from Perovskite Nanocrystals

The interfacial migration of surface-bound ligands highly affects the colloidal stability and optical quality of semiconductor nanocrystals, of which the underlying mechanism is not fully understood. Herein, colloidal CsPbBr₃ perovskite nanocrystals (PNCs) with fragile dynamic equilibrium of ligands are taken as the examples to reveal the important role of balancing ligand-solid/solvent affinity in suppressing the desorption of ligands. As a micellar surfactant, glycyrrhizic acid (GA) with bulky hydrophobic and hydrophilic groups exhibits a relatively smaller diffusion coefficient (∼440 μm²/s in methanol) and weaker ligand-liquid affinity than that of conventional alkyl amine and carboxy ligands. Consequently, hydrophilic GA-passivated PNCs (PNCs-GA) show excellent colloidal stability in various polar solvents with dielectric constant ranging from 2.2 to 32.6 and efficient photoluminescence with a quantum yield of 85.3%. Due to the suppressed desorption of GA, the morphological and optical properties of PNCs-GA are well maintained after five rounds purification and two months long-term storage. At last, hydrophilic PNCs-GA are successfully patterned through inkjet- and screen-printing technology. These findings offer deep insights into the interfacial chemistry of colloidal NCs and provide a universal strategy for preparing high-quality hydrophilic PNCs.

Promoting Energy Transfer Between Quasi-2D Perovskite Layers Toward Highly Efficient Red Light-Emitting Diodes

Although tremendous progress has recently been made in quasi-2D perovskite light-emitting diodes (PeLEDs), the performance of red PeLEDs emitting at ≈650-660 nm, which have wide prospects for application in photodynamic therapy, is still limited by an inefficient energy transfer process between the quasi-2D perovskite layers. Herein, a symmetric molecule of 3,3'-(9H-fluorene-9,9-diyl)dipropanamide (FDPA) is designed and developed with two functional acylamino groups and incorporated into the quasi-2D perovskites as the additive for achieving high-performance red PeLEDs. It is demonstrated that the agent can simultaneously diminish the van der Waals gaps between individual perovskite layers and passivate uncoordinated Pb²⁺ related defects at the surface and grain boundaries of the quasi-2D perovskites, which truly results in an efficient energy transfer in the quasi-2D perovskite films. Consequently, the red PeLEDs emitting at 653 nm with a peak external quantum efficiency of 18.5% and a maximum luminance of 2545 cd m^-2 are achieved, which is among the best performing red quasi-2D PeLEDs emitting at ≈650-660 nm. This work opens a way to further improve the electroluminescence performance of red PeLEDs.

Planar defect-free pure red perovskite light-emitting diodes via metastable phase crystallization

Solution-processable all-inorganic CsPbI_3-xBr_x perovskite holds great potential for pure red light-emitting diodes. However, the widely existing defects in this mixed halide perovskite markedly limit the efficiency and stability of present light-emitting diode devices. We here identify that intragrain Ruddlesden-Popper planar defects are primary forms of such defects in the CsPbI_3-xBr_x thin film owing to the lattice strain caused by inhomogeneous halogen ion distribution. To eliminate these defects, we develop a stepwise metastable phase crystallization strategy to minimize the CsPbI_3-xBr_x perovskite lattice strain, which brings planar defect-free CsPbI_3-xBr_x thin film with improved radiative recombination, narrowed emission band, and enhanced spectral stability. Using these high-quality thin films, we fabricate spectrally stable pure red perovskite light-emitting diodes, showing 17.8% external quantum efficiency and 9000 candela meter^-2 brightness with color coordinates required by Rec. 2020.

Bottom-Up Templated and Oriented Crystallization for Inverted Triple-Cation Perovskite Solar Cells with Stabilized Nickel-Oxide Interface

Inverted-structure perovskite solar cells (PSCs) are known for their superior device stability. However, based on nickel-oxide (NiO_x ) substrate, disordered crystallization and bottom interface instability of perovskite film are still the main factors that compromise the power conversion efficiency (PCE) of PSCs. Here, 2D perovskite of thiomorpholine 1,1-dioxide lead iodide (Td₂ PbI₄ ) is introduced as a template to prepare 3D perovskite thin film with high crystal orientation and large grain size via a bottom-up growth method. By adding TdCl to the precursor solution, pre-crystallized 2D Td₂ PbI₄ seeds can accumulate at the bottom interface, lowering the barrier of nucleation, and templating the growth of 3D perovskite films with improved (100) orientation and reduced defects during crystallization. In addition, 2D Td₂ PbI₄ at the bottom interface also hinders the interfacial redox reaction and reduces the hole extraction barrier on the buried interface. Based on this, the Td-0.5 PSC achieves a PCE of 22.09% and an open-circuit voltage of 1.16 V. Moreover, Td-0.5 PSCs show extremely high stability, which retains 84% of its initial PCE after 500 h of continuous illumination under maximum power point operating conditions in N₂ atmosphere. This work paves the way for performance improvement of inverted PSCs on NiO_x substrate.

Stability of Perovskite Light-Emitting Diodes: Existing Issues and Mitigation Strategies Related to Both Material and Device Aspects

Metal halide perovskites combine excellent electronic and optical properties, such as defect tolerance and high photoluminescence efficiency, with the benefits of low-cost, large-area, solution-based processing. Composition- and dimension-tunable properties of perovskites have already been utilized in bright and efficient light-emitting diodes (LEDs). At the same time, there are still great challenges ahead to achieving operational and spectral stability of these devices. In this review, the origins of instability of perovskite materials, and reasons for their degradation in LEDs are considered. Then, strategies for improving the stability of perovskite materials are reviewed, such as compositional engineering, dimensionality control, defect passivation, suitable encapsulation matrices, and fabrication of core/shell perovskite nanocrystals. For improvement of the operational stability of perovskite LEDs, the use of inorganic charge-transport layers, optimization of charge balance, and proper thermal management are considered. The review is concluded with a detailed account of the current challenges and a perspective on the key approaches and opportunities on how to reach the goal of stable, bright, and efficient perovskite LEDs.

Protocol for efficient and self-healing near-infrared perovskite light-emitting diodes

Preparation of highly efficient and stable perovskite light-emitting diodes (PeLEDs) with reproducible device performance is challenging. This protocol describes steps for fabrication of high-performance and self-healing PeLEDs. These include instructions for synthesis of charge-transporting zinc oxide (ZnO) nanocrystals, step-by-step device fabrication, and control over self-healing of the degraded devices.

For complete details on the use and execution of this protocol, please refer to Teng et al. (2021).

•

A protocol to fabricate efficient near-infrared (NIR) PeLEDs

•

Synthesis of high-quality, electron-transporting materials of ZnO nanocrystals (NCs)

•

Details on characterization and control of self-healing properties of the PeLED devices

Publisher’s note: Undertaking any experimental protocol requires adherence to local institutional guidelines for laboratory safety and ethics.

Core–shell carbon-polymer quantum dot passivation for near infrared perovskite light emitting diodes

High-performance perovskite light-emitting diodes (PeLEDs) require a high quality perovskite emitter and appropriate charge transport layers to facilitate charge injection and transport within the device. Solution-processed n-type metal oxides represent a judicious choice for the electron transport layer (ETL); however, they do not always present surface properties and energetics compatible with the perovskite emitter. Moreover, the emitter itself exhibits poor nanomorphology and defect traps that compromise the device performance. Here, we modulate the surface properties and interface energetics between the tin oxide (SnO2) ETL with the perovskite emitter by using an amino functionalized difluoro{2-[1-(3,5-dimethyl-2H-pyrrol-2-ylidene-N)ethyl]-3,5-dimethyl-1H-pyrrolato-N}boron compound and passivate the defects present in the perovskite matrix with carbon-polymer core–shell quantum dots inserted into the perovskite precursor. Both these approaches synergistically improve the perovskite layer nanomorphology and enhance the radiative recombination. These properties resulted in the fabrication of near-infrared PeLEDs based on formamidinium lead iodide (FAPbI3) with a high radiance of 92 W sr−1 m−2, an external quantum efficiency (EQE) of 14%, reduced efficiency roll-off and prolonged lifetime. In particular, the modified device retained 80% of the initial EQE (T80) for 33 h compared to 6 h of the reference cell.

Amine-Terminated Carbon Dots Linking Hole Transport Layer and Vertically Oriented Quasi-2D Perovskites through Hydrogen Bonds Enable Efficient LEDs

Close attention to the interfaces of solution-processed metal halide perovskite-based light-emitting devices (LEDs) is crucial for their optimal performance. Solution processing of these devices typically leads to the formation of van der Waals interfaces with a weak connection between different functional layers, leaving great room for improvement in charge transport through strengthening of the interlayer interaction. Here, we have realized a hydrogen-bond-assisted interface that makes use of ultrasmall amine-terminated carbon dots to enhance the interaction between the hole transport layer made of PEDOT:PSS and the hybrid lead bromide perovskite emitting layer, which not only promotes the hole injection efficiency but also orients the quasi-2D perovskite crystals penetrating the vertical direction of the device without any, or very few, horizontal grain boundaries, which has a profound effect on the photophysical and transport properties of the emitting layer. As a result, LEDs based on quasi-2D perovskites show up to 24.5% external quantum efficiency, 80 000 cd m^-2 brightness, and over 5-fold extended longevity.

Reciprocally Photovoltaic Light-Emitting Diode Based on Dispersive Perovskite Nanocrystal

Integrating highly efficient photovoltaic (PV) function into light-emitting diodes (LEDs) for multifunctional display is of great significance for compact low-power electronics, but it remains challenging. Herein, it is demonstrated that solution engineered perovskite nanocrystals (PNCs, ≈100 nm) enable efficient electroluminescence (EL) and PV performance within a single device through tailoring the dispersity and interface. It delivers the maximum brightness of 490 W sr^-1  m^-2 at 2.7 V and 23.2% EL external quantum efficiency, a record value for near-infrared perovskite LED, as well as 15.23% PV efficiency, among the highest value for nanocrystal perovskite solar cells. The PV-EL performance is well in line with the reciprocity relation. These all-solution-processed PV-LED devices open up viable routes to a variety of advanced applications, from touchless interactive screens to energy harvesting displays and data communication.

Revealing a Zinc Oxide/Perovskite Luminescence Quenching Mechanism Targeting Low-Roll-off Light-Emitting Diodes

Balanced charge injection is key to achieving perovskite light-emitting diodes (PeLEDs) with a low efficiency roll-off at a high brightness. The use of zinc oxide (ZnO) with a high electron mobility as the charge transport layers is desirable; however, photoluminescence (PL) quenching of a perovskite on ZnO always occurs. Here, a quasi-two-dimensional perovskite on ZnO is explored to uncover the PL quenching mechanism, mainly ascribed to the deprotonation of ammonium cations on the ZnO film in association with the decomposition of low-dimensional perovskite phases. Surprisingly, crystal plane-dependent PL quenching results indicate that the deprotonation rate strongly correlates with the crystal orientation of the ZnO surface. We developed a strategy for suppressing perovskite PL quenching by incorporating an atomic layer deposited Al₂O₃ onto the ZnO film. Consequently, an efficient inverted PeLED was achieved with a maximum external quantum efficiency of 17.7% and a less discernible efficiency roll-off at a high current density.

Tuning Precursor-Amine Interactions for Light-Emitting Lead Bromide Perovskites

Organic additives with amino moieties are effective in improving the properties of archetypical formamidinium (FA)-based hybrid perovskites for photovoltaic and light-emitting applications. However, a detailed understanding of how amino additives affect the perovskite materials is lacking, impeding developments in this area. Here, by investigating the interactions of lead bromide perovskite precursors with phenethylamine (PEA) and its derivatives with small variations in chemical structure, we reveal that only the secondary amine (N-methyl-2-phenylethylamine (N-PEA)) results in strengthened hydrogen bonds with FABr in precursor solutions, allowing the formation of high-quality perovskite films. The photoluminescence quantum efficiencies (PLQEs) of the resultant perovskite samples on widely used charge-transport substrates are retained to 82% of their original values, indicating reduced sensitivity to interfacial nonradiative traps critical to device applications. Using a standard device structure, green perovskite light-emitting diodes with peak external quantum efficiencies of 12.7% at ∼500 cd m^-2 and operational lifetimes (T₅₀) exceeding 10 h (at 100 cd m^-2) are obtained.

Deep-Red Perovskite Light-Emitting Diodes Based on One-Step-Formed γ-CsPbI3 Cuboid Crystallites

Inorganic CsPbI₃ perovskite with high chemical stability is attractive for efficient deep-red perovskite light-emitting diodes (PeLEDs) with high color purity. Compared to PeLEDs based on ex-situ-synthesized CsPbI₃ nanocrystals/quantum dots suffering from low conductivity and efficiency droop under high current densities, in situ deposited 3D CsPbI₃ films from precursor solutions can maintain high conductivity but show high trap density. Here, it is demonstrated that introducing diammonium iodide can increase the size of colloids in the precursor solution, retard the phase-transition rate, and passivate trap states of the in-situ-formed cuboid crystallites. The PeLED based on the one-step-formed 3D CsPbI₃ cuboid crystallite films shows a peak external quantum efficiency (EQE) value up to 15.03% because of the high conductivity and reduced trap states. Furthermore, this one-step method also has a wide processing window, which is attractive for flow-line production of large-area PeLED modules. The fabrication of a 9 cm² PeLED that exhibits a peak EQE of 10.30% is successfully demonstrated.