Atomic layer deposition triggered Fe-In-S cluster and gradient energy band in ZnInS photoanode for improved oxygen evolution reaction

Incorporating ReS2 Nanosheet into ZnIn2S4 Nanoflower as Synergistic Z-Scheme Photocatalyst for Highly Effective and Stable Visible-Light-Driven Photocatalytic Hydrogen Evolution and Degradation

Inspired by natural photosynthesis, the visible-light-driven Z-scheme system is very effective and promising for boosting photocatalytic hydrogen production and pollutant degradation. Here, a synergistic Z-scheme photocatalyst is constructed by coupling ReS2 nanosheet and ZnIn2S4 nanoflower and the experimental evidence for this direct Z-scheme heterostructure is provided by X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, and electron paramagnetic resonance. Consequently, such a unique nanostructure makes this Z-scheme heterostructure exhibit 23.7 times higher photocatalytic hydrogen production than that of ZnIn2S4 nanoflower. Moreover, the ZnIn2S4/ReS2 photocatalyst is also very stable for photocatalytic hydrogen evolution, almost without activity decay even storing for two weeks. Besides, this Z-scheme heterostructure also exhibits superior photocatalytic degradation rates of methylene blue (1.7 × 10-2 min-1) and mitoxantrone (4.2 × 10-3 min-1) than that of ZnIn2S4 photocatalyst. The ultraviolet-visible absorption spectra, transient photocurrent spectra, open-circuit potential measurement, and electrochemical impedance spectroscopy reveal that the superior photocatalytic performance of ZnIn2S4/ReS2 heterostructure is mostly attributed to its broad and strong visible-light absorption, effective separation of charge carrier, and improved redox ability. This work provides a promising nanostructure design of a visible-light-driven Z-scheme heterostructure to simultaneously promote photocatalytic reduction and oxidation activity.

Local polarization redistribution in ZnmIn2S3+m for the enhancing synergetic piezo-photocatalytic overall water splitting

Piezo-photocatalytic water (deuterium oxide) decomposition is a promising strategy for realizing renewable energy, but the manipulation of the polar center remains a big challenge. This study uses a simple low-temperature hydrothermal process to successfully manufacture ZnmIn2Sm+3 (m = 1-3) (ZnIn2S4, Zn2In2S5 and Zn3In2S6). Incorporating both experimental and theoretical analyses, the structural contraction and local polarization of the Zn-S bond in Zn2In2S5 enhance the piezoelectric response and surface charge accumulation, which facilitate charge transfer and reduce the activation energy of water. Remarkably, Zn2In2S5 exhibits excellent piezoelectric photocatalytic total water splitting performance (H2/O2: 4284.72/1967.00 μmol g-1h-1), which is 1.77 times that of photocatalytic performance. Moreover, a significant enhancement in D2O splitting performance can be obtained for the optimized Zn2In2S5. Our work offers valuable insights into the disclosure of local polarization in catalysts for enhancing piezo-photocatalytic overall water splitting.

FeOOH Nanosheets Coupled with ZnCdS Nanoparticles for Highly Improved Photocatalytic Degradation of Organic Dyes and Tetracycline in Water

Developing a low-cost and highly efficient semiconductor photocatalyst for the decomposition of organic pollutants and antibiotics is highly desirable. Herein, FeOOH nanosheets were prepared using a liquid-phase stirring technique and combined with ZnCdS (ZCS) nanoparticles to construct FeOOH/ZCS nanocomposite photocatalysts. The photocatalytic efficiency of the FeOOH/ZCS nanocomposite was evaluated for the decomposition of various pollutants, including rhodamine B, methylene Blue, and tetracycline. The FeOOH/ZCS nanocomposite exhibited significantly higher photocatalytic performance for the decomposition of various organics. Moreover, the optimized FeOOH/ZCS retained more than 90% of its initial photocatalytic activity even after five successful runs. Radical quenching test and electron spin resonance (ESR) analysis revealed that hydroxyl radicals (•OH) play a dominant role for the decomposition of organics. The FeOOH/ZCS Z-scheme heterojunction significantly facilitates higher charge transfer efficiency and the generation of reactive radicals, resulting in excellent photocatalytic degradation performance. This work offers a new approach to synthesis FeOOH-based photocatalyst for the elimination of organics and antibiotics in water.

Rapid Surface Reconstruction of In2S3 Photoanode via Flame Treatment for Enhanced Photoelectrochemical Performance

Surface reconstruction, reorganizing the surface atoms or structure, is a promising strategy to manipulate materials' electrical, electrochemical, and surface catalytic properties. Herein, a rapid surface reconstruction of indium sulfide (In2S3) is demonstrated via a high-temperature flame treatment to improve its charge collection properties. The flame process selectively transforms the In2S3 surface into a diffusionless In2O3 layer with high crystallinity. Additionally, it controllably generates bulk sulfur vacancies within a few seconds, leading to surface-reconstructed In2S3 (sr-In2S3). When using those sr-In2S3 as photoanode for photoelectrochemical water splitting devices, these dual functions of surface In2O3/bulk In2S3 reduce the charge recombination in the surface and bulk region, thus improving photocurrent density and stability. With optimized surface reconstruction, the sr-In2S3 photoanode demonstrates a significant photocurrent density of 8.5 mA cm-2 at 1.23 V versus a reversible hydrogen electrode (RHE), marking a 2.5-fold increase compared to pristine In2S3 (3.5 mA cm-2). More importantly, the sr-In2S3 photoanode exhibits an impressive photocurrent density of 7.3 mA cm-2 at 0.6 V versus RHE for iodide oxidation reaction. A practical and scalable surface reconstruction is also showcased via flame treatment. This work provides new insights for surface reconstruction engineering in sulfide-based semiconductors, making a breakthrough in developing efficient solar-fuel energy devices.

A restricted dynamic surface self-reconstruction toward high-performance of direct seawater oxidation

The development of highly efficient electrocatalysts for direct seawater splitting with bifunctionality for inhibiting anodic oxidation reconstruction and selective oxygen evolution reactions is a major challenge. Herein, we report a direct seawater oxidation electrocatalyst that achieves long-term stability for more than 1000 h at 600 mA/cm2@η600 and high selectivity (Faraday efficiency of 100%). This catalyst revolves an amorphous molybdenum oxide layer constructed on the beaded-like cobalt oxide interface by atomic layer deposition technology. As demonstrated, a new restricted dynamic surface self-reconstruction mechanism is induced by the formation a stable reconstructed Co-Mo double hydroxide phase interface layer. The device assembled into a two-electrode flow cell for direct overall seawater electrolysis maintained at 1 A/cm2@1.93 V for 500 h with Faraday efficiency higher than 95%. Hydrogen generation rate reaches 419.4 mL/cm2/h, and the power consumption (4.62 KWh/m3 H2) is lower than that of pure water (5.0 KWh/m3 H2) at industrial current density.

Substitutional Cd Dopant as Photohole Transfer Mediator Boosting Photoelectrochemical Solar Energy Conversion of 2D Cd-ZnIn2 S4 Photoanode

Fast recombination dynamics of photocarriers competing with sluggish surface photohole oxidation kinetics severely restricts the photoelectrochemical (PEC) conversion efficiency of photoanode. Here, a defect engineering strategy is developed to regulate photohole transfer and interfacial injection dynamics of 2D ZnIn2 S4 (ZIS). Via selectively introducing substitutional Cd dopant at Zn sites of the ZIS basal plane, energy band structure and surface electrochemical activity are successfully modulated in the Cd-doped ZIS (Cd-ZIS) nanosheet array photoanode. Comprehensive characterizations manifest that a shallow acceptor level induced by Cd doping and superior electrochemical activity make surface Cd dopants simultaneously act as capture centers and active sites to mediate photohole dynamics at the reaction interface. In depth photocarrier dynamics analysis demonstrates that highly efficient photohole capture of Cd dopants brings about effective space separation of photocarriers and acceleration of surface reaction kinetics. Therefore, the optimum 2D Cd-ZIS achieves excellent PEC solar energy conversion efficiency with a photocurrent density of 5.1 mA cm-2 at 1.23 VRHE and a record of applied bias photon-to-current efficiency (ABPE) of 3.0%. This work sheds light on a microstructure design strategy to effectively regulate photohole dynamics for the next-generation semiconducting PEC photoanodes.

Optical and Electrical Modulation Strategies of Photoelectrodes for Photoelectrochemical Water Splitting

When constructing efficient, cost-effective, and stable photoelectrodes for photoelectrochemical (PEC) systems, the solar-driven photo-to-chemical conversion efficiency of semiconductors is limited by several factors, including the surface catalytic activity, light absorption range, carrier separation, and transfer efficiency. Accordingly, various modulation strategies, such as modifying the light propagation behavior and regulating the absorption range of incident light based on optics and constructing and regulating the built-in electric field of semiconductors based on carrier behaviors in semiconductors, are implemented to improve the PEC performance. Herein, the mechanism and research advancements of optical and electrical modulation strategies for photoelectrodes are reviewed. First, parameters and methods for characterizing the performance and mechanism of photoelectrodes are introduced to reveal the principle and significance of modulation strategies. Then, plasmon and photonic crystal structures and mechanisms are summarized from the perspective of controlling the propagation behavior of incident light. Subsequently, the design of an electrical polarization material, polar surface, and heterojunction structure is elaborated to construct an internal electric field, which serves as the driving force to facilitate the separation and transfer of photogenerated electron-hole pairs. Finally, the challenges and opportunities for developing optical and electrical modulation strategies for photoelectrodes are discussed.

Large electronegativity differences between adjacent atomic sites activate and stabilize ZnIn2S4 for efficient photocatalytic overall water splitting

Photocatalytic overall water splitting into hydrogen and oxygen is desirable for long-term renewable, sustainable and clean fuel production on earth. Metal sulfides are considered as ideal hydrogen-evolved photocatalysts, but their component homogeneity and typical sulfur instability cause an inert oxygen production, which remains a huge obstacle to overall water-splitting. Here, a distortion-evoked cation-site oxygen doping of ZnIn2S4 (D-O-ZIS) creates significant electronegativity differences between adjacent atomic sites, with S1 sites being electron-rich and S2 sites being electron-deficient in the local structure of S1-S2-O sites. The strong charge redistribution character activates stable oxygen reactions at S2 sites and avoids the common issue of sulfur instability in metal sulfide photocatalysis, while S1 sites favor the adsorption/desorption of hydrogen. Consequently, an overall water-splitting reaction has been realized in D-O-ZIS with a remarkable solar-to-hydrogen conversion efficiency of 0.57%, accompanying a ~ 91% retention rate after 120 h photocatalytic test. In this work, we inspire an universal design from electronegativity differences perspective to activate and stabilize metal sulfide photocatalysts for efficient overall water-splitting.

Cocatalysts-Photoanode Interface in Photoelectrochemical Water Splitting: Understanding and Insights

Sluggish oxygen evolution reactions on photoanode surfaces severely limit the application of photoelectrochemical (PEC) water splitting. The loading of cocatalysts on photoanodes has been recognized as the simplest and most efficient optimization scheme, which can reduce the surface barrier, provide more active sites, and accelerate the surface catalytic reaction kinetics. Nevertheless, the introduction of cocatalysts inevitably generates interfaces between photoanodes and oxygen evolution cocatalysts (Ph/OEC), which causes severe interfacial recombination and hinders the carrier transfer. Recently, many researchers have focused on cocatalyst engineering, while few have investigated the effect of the Ph/OEC interface. Hence, to maximize the advantages of cocatalysts, interfacial problems for designing efficient cocatalysts are systematically introduced. In this review, the interrelationship between the Ph/OEC and PEC performance is classified and some methods for characterizing Ph/OEC interfaces are investigated. Additionally, common interfacial optimization strategies are summarized. This review details cocatalyst-design-based interfacial problems, provides ideas for designing efficient cocatalysts, and offers references for solving interfacial problems.

Extending conducting channels in Fe-N-C by interfacial growth of CNTs with minimal metal loss for efficient ORR electrocatalysis

Achieving a high electrocatalytic performance using a completely metal-free electrocatalyst, preferably based on only carbonaceous materials, remains a challenge. Alternatively, an efficient composite of a carbon nanostructure and a non-noble metal with minimum dependence on a metal holds immense potential. Although single-atom catalysis brings superior performance, its complex synthetic strategy limits its large-scale implementation. Previous investigation has shown that atomic dispersion (Fe-Nx-C) is accompanied by higher metal-loss compared to nanoparticle formation (Fe-NPs-N-C). Therefore, to achieve minimum metal loss, we first incorporated iron nanoparticles (Fe NPs) to N-doped carbon (N-C) and then exposed them to a cheap carbon source, melamine at high temperature, resulting in the growth of carbon nanotubes (CNTs) catalysed by those Fe NPs loaded on N-C (Fe-NPs-N-C). Thermogravimetric analysis showed that the metal-retention in the composite is higher than that in the bare carbon nanotube and even the atomically dispersed Fe-active sites on N-C. The composite material (Fe-NPs-N-C/CNT) shows a high half-wave potential (0.89 V vs. RHE) which is superior to that of commercial Pt/C towards the oxygen reduction reaction (ORR). The enhanced activity is attributed to the synergistic effect of high conductivity of CNTs and active Fe-sites as the composite exceeds the individual electrocatalytic performance shown by Fe-CNTs & Fe-NPs-N-C, and even that of atomically dispersed Fe-active sites on N-C.

Direct Growth of Polymeric Carbon Nitride Nanosheet Photoanode for Greatly Efficient Photoelectrochemical Water-Splitting

A general method for the direct synthesis of highly homogeneous and dense polymerized carbon nitride (PCN) nanosheet films on F: SnO2 (FTO) is developed. Detailed photoelectrochemical (PEC) water-splitting studies reveal that the as-synthesized PCN films exhibit outstanding performance as photoanode for PEC water-splitting. The optimal PCN photoanode exhibits excellent photocurrent density of 650 µA cm-2 , and monochromatic incident photon-to-electron conversion efficiency (IPCE) value up to 30.55% (λ = 400 nm) and 25.97% (λ = 420 nm) at 1.23 VRHE in 0.1 m KOH electrolyte. More importantly, the PCN photoanode has an excellent hole extraction efficiency of up to 70 ± 3% due to the abundance of active sites provided by the PCN photoanode nanosheet, which promotes the transport rates of OER-relevant species. These PCN films provide a new benchmark for PCN photoanode materials.

Porphyrins-Assisted Cocatalyst Engineering with CoOV Bond in BiVO4 Photoanode for Efficient Oxygen Evolution Reaction

The application of photoelectrochemical (PEC) water splitting is limited by the sluggish surface oxygen evolution reaction (OER) kinetics. OER kinetics can be effectively improved through cocatalyst engineering. However, the tardy transfer process and serious recombination of carriers are the key factors restricting the cocatalyst development. Taking BiVO4 as an example, a Co-modified heme film rich in large conjugated ring structures is introduced onto the photoanode surface using a solvothermal method. This film functions as an efficient cocatalyst. It considerably reduces the surface overpotential, promotes the transfer of photogenerated holes, and boosts the kinetics of OER by specifically affecting the formation of OOH*. Simultaneously, the formed CoOV bonds induce strong interaction at the photoanode/cocatalyst interfaces, reducing the recombination of photogenerated carriers. Consequently, the onset potential of the optimized photoanode decreases from 0.45 to 0.07 V and the photocurrent density at 1.23 V versus reversible hydrogen electrode boosts to 5.3 mA cm-2 . This work demonstrates a facile strategy for designing cocatalysts to obtain rapid hole transfer capability and reduced carrier recombination for improved PEC performance.

Thermal Annealing Induced Surface Oxygen Vacancy Clusters in α-MnO2 Nanowires for Catalytic Ozonation of VOCs at Ambient Temperature

Catalytic ozonation has gained considerable interest in volatile organic compound (VOC) elimination due to its mild reaction conditions. However, the low activity and mineralization rate of VOCs over catalysts hinder its practical application. Herein, a series of α-MnO2 nanowire catalysts were prepared via thermal annealing treatment at various temperatures to tailor defect species. Numerous characterization techniques were used and combined to investigate the relationship between activity and microstructure. PALS and XAFS indicated that more unsaturated manganese and oxygen vacancies, especially surface oxygen vacancy clusters, were produced in α-MnO2 under the optimal high calcination temperature. As a result, MnO2-600 was found to exhibit the best-ever performance in toluene conversion (95%) and mineralization rate (89.5%) at 20 °C, making it a promising candidate for practical use. The roles of these defects in manipulating the reactive oxygen species of α-MnO2 were clarified by quantifying the amounts of reactive oxygen species by quenching experiments and density functional theory calculations. 1O2 and ·OH species generated in the vicinity of oxygen vacancy clusters, especially the dimer oxygen vacancy cluster, were identified as key oxygen species in the abatement of toluene. This study provides a facile method to engineer the microstructure of MnO2 by means of the manipulation of oxygen vacancies and an in-depth understanding of their roles in the catalytic ozonation of VOC.

Process Accumulated 8% Efficient Cu2 ZnSnS4 -BiVO4 Tandem Cell for Solar Hydrogen Evolution with the Dynamic Balance of Solar Energy Storage and Conversion

A process accumulated record solar to hydrogen (STH) conversion efficiency of 8% is achieved on the Cu2 ZnSnS4 -BiVO4 tandem cell by the synergistic coupling effect of solar thermal and photoelectrochemical (PEC) water splitting with the dynamic balance of solar energy storage and conversion of the greenhouse system. This is the first report of a Cu2 ZnSnS4 -BiVO4 tandem cell with a high unbiased STH efficiency of over 8% for solar water splitting due to the greenhouse device system. The greenhouse acts as a solar thermal energy storage cell, which absorbs infrared solar light and storage as thermal energy with the solar light illumination time, while thermoelectric device (TD) converts thermal energy into electric power, electric power is also recycled and added onto Cu2 ZnSnS4 -BiVO4 tandem cell for enhanced overall water splitting. Finally, the solar water splitting properties of the TD-Cu2 ZnSnS4 -BiVO4 integrated tandem cell in pure natural seawater are demonstrated, and a champion STH efficiency of 2.46% is presented, while a large area (25 cm2 ) TD-Cu2 ZnSnS4 -BiVO4 integrated tandem device with superior long-term stability is investigated for 1 week, which provides new insight into photoelectrochemical solar water splitting devices.

Constructing NCuS Interface Chemical Bonds over SnS2 for Efficient Solar-Driven Photoelectrochemical Water Splitting

The restricted charge transfer and slow oxygen evolution reaction (OER) dynamics tremendously hamper the realistic implementation of SnS₂ photoanodes for photoelectrochemical (PEC) water splitting. Here, a novel strategy is developed to construct interfacial NCuS bonds between NC skeletons and SnS₂ (CuNC@SnS₂ ) for efficient PEC water splitting. Compared with SnS₂ , the PEC activity of CuNC@SnS₂ photoelectrode is tremendously heightened, obtaining a current density of 3.40 mA cm² at 1.23 V_RHE with a negatively shifted onset potential of 0.04 V_RHE , which is 6.54 times higher than that of SnS₂ . The detailed experimental characterizations and theoretical calculation demonstrate that the interfacial NCuS bonds enhance the OER kinetic, reduce the surface overpotential, facilitate the separation of photon-generated carriers, and provide a fast transmission channel for electrons. This work presents a new approach for modulating charge transfer by interfacial bond design in heterojunction photoelectrodes toward promoting PEC performance and solar energy application.

Fast-Charging Zn-Air Batteries with Long Lifetime Enabled by Reconstructed Amorphous Multi-Metallic Sulfide

Developing fast-charging Zn-air batteries is crucial for widening their application but remains challenging owing to the limitation of sluggish oxygen evolution reaction (OER) kinetics and insufficient active sites of electrocatalysts. To solve this issue, a reconstructed amorphous FeCoNiS_x electrocatalyst with high density of efficient active sites, yielding low OER overpotentials of 202, 255, and 323 mV at 10, 100, and 500 mA cm^-2 , respectively, is developed for fast-charging Zn-air batteries with low charging voltages at 100-400 mA cm^-2 . Furthermore, the fabricated 3241.8 mAh (20 mA cm^-2 , 25 °C) quasi-solid Zn-air battery shows long lifetime of 500 h at -10 and 25 °C as well as 150 h at 40 °C under charging 100 mA cm^-2 . The detailed characterizations combine with density functional theory calculations indicate that the defect-rich crystalline/amorphous ternary metal (oxy)hydroxide forms by the reconstruction of amorphous multi-metallic sulfide, where the electron coupling effect among multi-active sites and migration of intermediate O* from Ni site to the Fe site breaks the scaling relationship to lead to a low theoretical OER overpotential of 170 mV, accounting for the outstanding fast-charging property. This work not only provides insights into designing advanced OER catalysts by the self-reconstruction of the pre-catalyst but also pioneers a pathway for practical fast-charging Zn-air batteries.

Interfacial Bi-S bonds modulate band alignment for efficient solar water oxidation

Introducing suitable interfacial chemical bonds into heterojunctions can increase the charge carrier density, propel the charge separation, and facilitate interfacial charge extraction in photoanodes for photoelectrochemical (PEC) water oxidation. However, tuning chemical bonds at heterojunction interfaces and elucidating their influences on band alignment and the associated evolution of PEC performance remain elusive. Herein, Bi-S bonds were introduced into the interface of a CdIn₂S₄ (CIS)/Bi₂WO₆ (BWO) heterojunction. In situ irradiated X-ray photoelectron spectroscopy and electron spin resonance signals confirm that the Bi-S bond transforms the band alignment from type II to the direct Z-scheme, significantly enhancing the carrier separation efficiency. Theoretical calculations show that the Bi-S bond not only acts as an atomic-level charge transfer channel, but also changes the migration pathway and distance within the heterojunction. As a result, the optimized CIS/BWO photoanode exhibits a relatively high PEC performance of 4.25 mA cm^-2 at 1.23 V vs. RHE (V_RHE) and a low onset potential of 0.30 V_RHE. This work presents a new avenue to construct comprehensively improved photoanodes by tuning the interfacial structures at the atomic level.

Construction of a ZnIn2S4/Au/CdS Tandem Heterojunction for Highly Efficient CO2 Photoreduction

Photocatalytic CO₂ reduction technology is of great importance to alleviate energy crisis and environmental pollution; however, it remains a serious challenge due to the fast recombination of carriers. In this study, we report a three-dimensional structure of a ZnIn₂S₄/Au/CdS composite photocatalyst for the CO₂ reduction reaction, where Au nanoparticles (NPs) are evenly anchored on the surface of ZnIn₂S₄ by photodeposition and Au NPs are wrapped around by CdS. In ZnIn₂S₄/Au/CdS composite photocatalysts, Au NPs act as a bridge to construct a "semiconductor-metal-semiconductor" tandem electron transfer mechanism (ZnIn₂S₄ → Au → CdS) heterojunction, which greatly promotes the transfer of photogenerated electrons. It is worth noting that Au NPs, as a local surface plasmon resonance (LSPR) effect excited source to generate excited-state electrons, further improve the photoreduction CO₂ activity. Under UV-vis light irradiation, the CO yield of ZnIn₂S₄/Au/CdS can reach 63.07 μmol·g^-1·h^-1, which is higher than that of 6.37 μmol·g^-1·h^-1 for pure ZnIn₂S₄, 0.93 μmol·g^-1·h^-1 for CdS, 8.9 μmol·g^-1·h^-1 for ZnIn₂S₄/CdS, 31.04 μmol·g^-1·h^-1 for ZnIn₂S₄/Au, and 5.37 μmol·g^-1·h^-1 for CdS/Au. In addition, the ternary ZnIn₂S₄/Au/CdS composite photocatalyst has good cyclic stability. This study broadens the idea of designing photocatalysts with good carrier separation efficiency.