Active control of micrometer plasmon propagation in suspended graphene

Highly confined epsilon-near-zero and surface phonon polaritons in SrTiO3 membranes

Recent theoretical studies have suggested that transition metal perovskite oxide membranes can enable surface phonon polaritons in the infrared range with low loss and much stronger subwavelength confinement than bulk crystals. Such modes, however, have not been experimentally observed so far. Here, using a combination of far-field Fourier-transform infrared (FTIR) spectroscopy and near-field synchrotron infrared nanospectroscopy (SINS) imaging, we study the phonon polaritons in a 100 nm thick freestanding crystalline membrane of SrTiO3 transferred on metallic and dielectric substrates. We observe a symmetric-antisymmetric mode splitting giving rise to epsilon-near-zero and Berreman modes as well as highly confined (by a factor of 10) propagating phonon polaritons, both of which result from the deep-subwavelength thickness of the membranes. Theoretical modeling based on the analytical finite-dipole model and numerical finite-difference methods fully corroborate the experimental results. Our work reveals the potential of oxide membranes as a promising platform for infrared photonics and polaritonics.

Steering and cloaking of hyperbolic polaritons at deep-subwavelength scales

Polaritons are well-established carriers of light, electrical signals, and even heat at the nanoscale in the setting of on-chip devices. However, the goal of achieving practical polaritonic manipulation over small distances deeply below the light diffraction limit remains elusive. Here, we implement nanoscale polaritonic in-plane steering and cloaking in a low-loss atomically layered van der Waals (vdW) insulator, α-MoO3, comprising building blocks of customizable stacked and assembled structures. Each block contributes specific characteristics that allow us to steer polaritons along the desired trajectories. Our results introduce a natural materials-based approach for the comprehensive manipulation of nanoscale optical fields, advancing research in the vdW polaritonics domain and on-chip nanophotonic circuits.

A triple Fano resonance Si-graphene metasurface for multi-channel tunable ultra-narrow band sensing

In this work, a dielectric metasurface composed of a silicon nanodisk etched with a square hole is proposed. By introducing C4v symmetry breaking, the symmetry-protected bound states in the continuum (SP-BIC) is transformed into a quasi-BIC (Q-BIC), simultaneously inducing triple Fano resonances in the near-infrared light band corresponding to one dipole and two Q-BIC resonances. The characteristics of Q-BIC resonances are elucidated through multipole decomposition and near-field distribution analysis. Subsequently, monolayer graphene is integrated into the Si metasurface. The light field in the composite metasurface can be flexibly modulated by changing the Fermi level of graphene. This modulation enables optimal transmission with an enhancement of up to 252%, while the confined electromagnetic energy experiences a remarkable increase of about 1020%. Simulation results demonstrate that the Si-graphene composite metasurface exhibits a high refractive index sensitivity of 162 nm RIU-1, accompanied by a figure of merit of 170.526 RIU-1. This composite metasurface holds promise as a high-performance sensor in the near-infrared band and has potential for application in the fields of active tunable optical devices and biochemical sensing.

Polariton Microfluidics for Nonreciprocal Dragging and Reconfigurable Shaping of Polaritons

Dielectric environment engineering is an efficient and general approach to manipulating polaritons. Liquids serving as the surrounding media of polaritons have been used to shift polariton dispersions and tailor polariton wavefronts. However, those liquid-based methods have so far been limited to their static states, not fully unleashing the promise offered by the mobility of liquids. Here, we propose a microfluidic strategy for polariton manipulation by merging polaritonics with microfluidics. The diffusion of fluids causes gradient refractive indices over microchannels, which breaks the symmetry of polariton dispersions and realizes the microfluidic analogue to nonreciprocal polariton dragging. Based on polariton microfluidics, we also designed a set of on-chip polaritonic elements to actively shape polaritons, including planar lenses, off-axis lenses, Janus lenses, bends, and splitters. Our strategy expands the toolkit for the manipulation of polaritons at the subwavelength scale and possesses potential in the fields of polariton biochemistry and molecular sensing.

Manipulating hyperbolic transient plasmons in a layered semiconductor

Anisotropic materials with oppositely signed dielectric tensors support hyperbolic polaritons, displaying enhanced electromagnetic localization and directional energy flow. However, the most reported hyperbolic phonon polaritons are difficult to apply for active electro-optical modulations and optoelectronic devices. Here, we report a dynamic topological plasmonic dispersion transition in black phosphorus via photo-induced carrier injection, i.e., transforming the iso-frequency contour from a pristine ellipsoid to a non-equilibrium hyperboloid. Our work also demonstrates the peculiar transient plasmonic properties of the studied layered semiconductor, such as the ultrafast transition, low propagation losses, efficient optical emission from the black phosphorus's edges, and the characterization of different transient plasmon modes. Our results may be relevant for the development of future optoelectronic applications.

Reconstruction of the Near-Field Electric Field by SNOM Measurement

Scanning near-field optical microscope (SNOM) with nanoscale spatial resolution has been a powerful tool in studying the plasmonic properties of nano materials/structures. However, the quantification of the SNOM measurement remains a major challenge in the field due to the lack of reliable methodologies. We employed the point-dipole model to describe the tip-surface interaction upon laser illumination and theoretically derived the quantitative relationship between the measured results and the actual near-field electric field strength. Thus, we can experimentally reconstruct the near-field electric field through this theoretically calculated relationship. We also developed an experimental technique together with FEM simulation to get the above relationship experimentally and reconstruct the near-field electric field from the measurement by SNOM.

Extra-High Mechanical and Phononic Anisotropy in Black Phosphorus Blisters

Strain is an effective strategy to modulate the electrical, optical, and optoelectronic properties of 2D materials. Conventional circular blisters could generate a biaxial stretching of 2D membranes with notable strain gradients along the hoop direction. However, such a deformation mode cannot be utilized to investigate mechanical responses of in-plane anisotropic 2D materials, for example, black phosphorus (BP), due to its crystallographic orientation dependence. Here, a novel rectangular-shaped bulge device is developed to uniaxially stretch the membrane, and further provide a promising platform to detect orientation-dependent mechanical and optical properties of anisotropic 2D materials. Impressively, the derived anisotropic ratio of Young's modulus of BP flakes is much higher than the values obtained via the nanoindentation method. The extra-high strain-dependent phononic anisotropy in Raman modes along different crystalline orientations is also observed. The designed rectangular budge device expands the uniaxial deformation methods available, allowing to explore the mechanical, and strain-dependent physical properties of other anisotropic 2D materials more broadly.

Functionalizing nanophotonic structures with 2D van der Waals materials

The integration of two-dimensional (2D) van der Waals materials with nanostructures has triggered a wide spectrum of optical and optoelectronic applications. Photonic structures of conventional materials typically lack efficient reconfigurability or multifunctionality. Atomically thin 2D materials can thus generate new functionality and reconfigurability for a well-established library of photonic structures such as integrated waveguides, optical fibers, photonic crystals, and metasurfaces, to name a few. Meanwhile, the interaction between light and van der Waals materials can be drastically enhanced as well by leveraging micro-cavities or resonators with high optical confinement. The unique van der Waals surfaces of the 2D materials enable handiness in transfer and mixing with various prefabricated photonic templates with high degrees of freedom, functionalizing as the optical gain, modulation, sensing, or plasmonic media for diverse applications. Here, we review recent advances in synergizing 2D materials to nanophotonic structures for prototyping novel functionality or performance enhancements. Challenges in scalable 2D materials preparations and transfer, as well as emerging opportunities in integrating van der Waals building blocks beyond 2D materials are also discussed.

Maternal exposure to sunlight-irradiated graphene oxide induces neurodegeneration-like symptoms in zebrafish offspring through intergenerational translocation and genomic DNA methylation alterations

The physiochemical properties of graphene oxide may be affected by sunlight irradiation. However, the underlying mechanisms that alter the properties and subsequent intergenerational effects are not sufficiently investigate. Epigenetics is an early sensitive marker for the intergenerational effects of nanomaterial exposure due to the epigenetic memory. In this study, we investigate changes in the physicochemical properties and the intergenerational effects of maternal exposure to simulated sunlight-irradiated polyethyleneimine-functionalized graphene oxide (SL-PEI-GO). Results show that the physicochemical properties of polyethyleneimine-functionalized graphene oxide (PEI-GO) can be altered significantly by the oxidation of carbon atoms with unpaired electrons present in the defects and on the edges of PEI-GO by sunlight. First, the positive charges, sharp edges, defects and disordered structures of SL-PEI-GO make it translocate from maternal zebrafish to offspring, thus catalyzing the production of reactive oxygen species and damaging mitochondria directly. In addition, changes in DNA methylation reduce the expression of protocadherin1a, protocadherin19 and cadherin4, thus destroying cell membrane integrity, cell adhesion and Ca2+ binding. The alteration of DNA methylation induced by maternal exposure activates the Ca2+-CaMKK-brsk2a pathway, which catalyzes the phosphorylation of Tau and eventually results in the appearance of neurodegeneration-like symptoms, including the loss of neurons and neurobehavioral disorders. This study demonstrates that maternal exposure to SL-PEI-GO induces clear neurodegeneration-like symptoms in offspring through both the intergenerational translocation of nanomaterials and differential DNA methylation. These findings may provide new insights into the health risks of nanomaterials altered by nature conditions.

Polaritons in Van der Waals Heterostructures

2D monolayers supporting a wide variety of highly confined plasmons, phonon polaritons, and exciton polaritons can be vertically stacked in van der Waals heterostructures (vdWHs) with controlled constituent layers, stacking sequence, and even twist angles. vdWHs combine advantages of 2D material polaritons, rich optical structure design, and atomic scale integration, which have greatly extended the performance and functions of polaritons, such as wide frequency range, long lifetime, ultrafast all-optical modulation, and photonic crystals for nanoscale light. Here, the state of the art of 2D material polaritons in vdWHs from the perspective of design principles and potential applications is reviewed. Some fundamental properties of polaritons in vdWHs are initially discussed, followed by recent discoveries of plasmons, phonon polaritons, exciton polaritons, and their hybrid modes in vdWHs. The review concludes with a perspective discussion on potential applications of these polaritons such as nanophotonic integrated circuits, which will benefit from the intersection between nanophotonics and materials science.

Ambipolar charge-transfer graphene plasmonic cavities

Plasmon polaritons in van der Waals materials hold promise for various photonics applications^1-4. The deterministic imprinting of spatial patterns of high carrier density in plasmonic cavities and nanoscale circuitry can enable the realization of advanced nonlinear nanophotonic⁵ and strong light-matter interaction platforms⁶. Here we demonstrate an oxidation-activated charge transfer strategy to program ambipolar low-loss graphene plasmonic structures. By covering graphene with transition-metal dichalcogenides and subsequently oxidizing the transition-metal dichalcogenides into transition-metal oxides, we activate charge transfer rooted in the dissimilar work functions between transition-metal oxides and graphene. Nano-infrared imaging reveals ambipolar low-loss plasmon polaritons at the transition-metal-oxide/graphene interfaces. Further, by inserting dielectric van der Waals spacers, we can precisely control the electron and hole densities induced by oxidation-activated charge transfer and achieve plasmons with a near-intrinsic quality factor. Using this strategy, we imprint plasmonic cavities with laterally abrupt doping profiles with nanoscale precision and demonstrate plasmonic whispering-gallery resonators based on suspended graphene encapsulated in transition-metal oxides.

2D Material Infrared Photonics and Plasmonics

Two-dimensional (2D) materials including graphene, transition metal dichalcogenides, black phosphorus, MXenes, and semimetals have attracted extensive and widespread interest over the past years for their many intriguing properties and phenomena, underlying physics, and great potential for applications. The vast library of 2D materials and their heterostructures provides a diverse range of electrical, photonic, mechanical, and chemical properties with boundless opportunities for photonics and plasmonic devices. The infrared (IR) regime, with wavelengths across 0.78 μm to 1000 μm, has particular technological significance in industrial, military, commercial, and medical settings while facing challenges especially in the limit of materials. Here, we present a comprehensive review of the varied approaches taken to leverage the properties of the 2D materials for IR applications in photodetection and sensing, light emission and modulation, surface plasmon and phonon polaritons, non-linear optics, and Smith-Purcell radiation, among others. The strategies examined include the growth and processing of 2D materials, the use of various 2D materials like semiconductors, semimetals, Weyl-semimetals and 2D heterostructures or mixed-dimensional hybrid structures, and the engineering of light-matter interactions through nanophotonics, metasurfaces, and 2D polaritons. Finally, we give an outlook on the challenges in realizing high-performance and ambient-stable devices and the prospects for future research and large-scale commercial applications.

Electric Field-Controlled Damping Switches of Coupled Dirac Plasmons

For quasiparticle systems, the control of the quasiparticle lifetime is an important goal, determining whether the related fascinating physics can be revealed in fundamental research and utilized in practical applications. Here, we use double-layer graphene with a boron nitride spacer as a model system to demonstrate that the lifetime of coupled Dirac plasmons can be remotely tuned by electric field-controlled damping pathways. Essentially, one of the graphene layers serves as an external damping amplifier whose efficiency can be controlled by the corresponding doping level. Through this damping switch, the damping rate of the plasmon can be actively tuned up to 1.7 fold. This Letter provides a prototype design to actively control the lifetime of graphene plasmons and also broadens our horizon for the damping control of other quasiparticle systems.

Tunable Planar Focusing Based on Hyperbolic Phonon Polaritons in α-MoO3

Manipulation of the propagation and energy-transport characteristics of subwavelength infrared (IR) light fields is critical for the application of nanophotonic devices in photocatalysis, biosensing, and thermal management. In this context, metamaterials are useful composite materials, although traditional metal-based structures are constrained by their weak mid-IR response, while their associated capabilities for optical propagation and focusing are limited by the size of attainable artificial optical structures and the poor performance of the available active means of control. Herein, a tunable planar focusing device operating in the mid-IR region is reported by exploiting highly oriented in-plane hyperbolic phonon polaritons in α-MoO₃ . Specifically, an unprecedented change of effective focal length of polariton waves from 0.7 to 7.4 μm is demonstrated by the following three different means of control: the dimension of the device, the employed light frequency, and engineering of phonon-plasmon hybridization. The high confinement characteristics of phonon polaritons in α-MoO₃ permit the focal length and focal spot size to be reduced to 1/15 and 1/33 of the incident wavelength, respectively. In particular, the anisotropic phonon polaritons supported in α-MoO₃ are combined with tunable surface-plasmon polaritons in graphene to realize in situ and dynamical control of the focusing performance, thus paving the way for phonon-polariton-based planar nanophotonic applications.