One-step removal of alkynes and propadiene from cracking gases using a multi-functional molecular separator

Palladium(II) Modulation Enhances the Water Stability and Aqueous 99TcO4-/ReO4- Removal Performance of Metal-Organic Frameworks

Improving the water stability of metal-organic frameworks (MOFs) is essential for their use in water pollution treatment and environmental remediation, though it remains technically challenging. Herein, we report a novel cationic MOF constructed with [Th6O4(OH)4(COO)12] units and [CoN4·Cl2] units possessing a ftw-type topology (denoted as 1-Th-Co). 1-Th-Co itself exhibited poor water stability but excellent stability following a palladium(II) modulation strategy. Experimental studies reveal that Co(II) ions in 1-Th-Co were replaced by Pd(II) ions through cation exchange in N,N-diethylformamide (yielding 1-Th-Pd). The planar PdN4 units in 1-Th-Pd were responsible for improving the water stability of the framework. As a result, 1-Th-Pd offered excellent stability, fast adsorption kinetics, and high removal ratios for 99TcO4- and ReO4- (as a 99TcO4- surrogate) in contaminated water. When used in packed columns, 1-Th-Pd can dynamically capture ReO4- from groundwater. This work provides a new avenue for improving the water stability of MOFs, offering new vistas for the decontamination of aqueous solutions containing 99TcO4- and ReO4-.

Topology Reconfiguration of Anion-Pillared Metal-Organic Framework from Flexibility to Rigidity for Enhanced Acetylene Separation

Flexible metal-organic framework (MOF) adsorbents commonly encounter limitations in removing trace impurities below gate-opening threshold pressures. Topology reconfiguration can fundamentally eliminate intrinsic structural flexibility, yet remains a formidable challenge and is rarely achieved in practical applications. Herein, a solvent-mediated approach is presented to regulate the flexible CuSnF6-dpds-sql (dpds = 4,4''-dipyridyldisulfide) with sql topology into rigid CuSnF6-dpds-cds with cds topology. Notably, the cds topology is unprecedented and first obtained in anion-pillared MOF materials. As a result, rigid CuSnF6-dpds-cds exhibits enhanced C2H2 adsorption capacity of 48.61 cm3 g-1 at 0.01 bar compared to flexible CuSnF6-dpds-sql (21.06 cm3 g-1). The topology transformation also facilitates the adsorption kinetics for C2H2, exhibiting a 6.5-fold enhanced diffusion time constant (D/r2) of 1.71 × 10-3 s-1 on CuSnF6-dpds-cds than that of CuSnF6-dpds-sql (2.64 × 10-4 s-1). Multiple computational simulations reveal the structural transformations and guest-host interactions in both adsorbents. Furthermore, dynamic breakthrough experiments demonstrate that high-purity C2H4 (>99.996%) effluent with a productivity of 93.9 mmol g-1 can be directly collected from C2H2/C2H4 (1/99, v/v) gas-mixture in a single CuSnF6-dpds-cds column.

Selective sorting of hexane isomers by anion-functionalized metal-organic frameworks with optimal energy regulation

Extensive efforts have been made to improve the separation selectivity of hydrocarbon isomers with nearly distinguishable boiling points; however, how to balance the high regeneration energy consumption remains a daunting challenge. Here we describe the efficient separation of hexane isomers by constructing and exploiting the rotational freedom of organic linkers and inorganic SnF62- anions within adaptive frameworks, and reveal the nature of flexible host-guest interactions to maximize the gas-framework interactions while achieving potential energy storage. This approach enables the discrimination of hexane isomers according to the degree of branching along with high capacity and record mono-/di-branched selectivity (6.97), di-branched isomers selectivity (22.16), and upgrades the gasoline to a maximum RON (Research Octane Number) of 105. Benefitting from the energy regulation of the flexible pore space, the material can be easily regenerated only through a simple vacuum treatment for 15 minutes at 25 °C with no temperature fluctuation, saving almost 45% energy compared to the commercialized zeolite 5 A. This approach could potentially revolutionize the whole scenario of alkane isomer separation processes.

Dinuclear Copper Sulfate-Based Square Lattice Topology Network with High Alkyne Selectivity

Porous coordination networks (PCNs) sustained by inorganic anions that serve as linker ligands can offer high selectivity toward specific gases or vapors in gas mixtures. Such inorganic anions are best exemplified by electron-rich fluorinated anions, e.g., SiF62-, TiF62-, and NbOF52-, although sulfate anions have recently been highlighted as inexpensive and earth-friendly alternatives. Herein, we report the use of a rare copper sulfate dimer molecular building block to generate two square lattice, sql, coordination networks which can be prepared via solvent layering or slurrying, CuSO4(1,4-bib)1.5, 1, (1,4-bib = 1,4-bisimidazole benzene) and CuSO4(1,4-bin)1.5, 2, (1,4-bin = 1,4-bisimidazole naphthalene). Variable-temperature SCXRD and PXRD experiments revealed that both sql networks underwent reversible structural transformations due to linker rotations or internetwork displacements. Gas sorption studies conducted upon the narrow-pore phase of CuSO4(1,4-bin)1.5, 2np, found a high calculated 1:99 selectivity for C2H2 over C2H4 (33.01) and CO2 (15.18), as well as strong breakthrough performance. Across-the-board, C3H4 selectivity vs C3H6, CO2, and C3H8 was also observed. Sulfate-based PCNs, although still understudied, appear increasingly likely to offer utility in gas and vapor separations.

Interaction-selective molecular sieving adsorbent for direct separation of ethylene from senary C2-C4 olefin/paraffin mixture

Olefin/paraffin separations are among the most energy-intensive processes in the petrochemical industry, with ethylene being the most widely consumed chemical feedstock. Adsorptive separation utilizing molecular sieving adsorbents can optimize energy efficiency, whereas the size-exclusive mechanism alone cannot achieve multiple olefin/paraffin sieving in a single adsorbent. Herein, an unprecedented sieving adsorbent, BFFOUR-Cu-dpds (BFFOUR = BF4-, dpds = 4,4'-bipyridinedisulfide), is reported for simultaneous sieving of C2-C4 olefins from their corresponding paraffins. The interlayer spaces can be selectively opened through stronger guest-host interactions induced by unsaturated C = C bonds in olefins, as opposed to saturated paraffins. In equimolar six-component breakthrough experiments (C2H4/C2H6/C3H6/C3H8/n-C4H8/n-C4H10), BFFOUR-Cu-dpds can simultaneously divide olefins from paraffins in the first column, while high-purity ethylene ( > 99.99%) can be directly obtained through the subsequent column using granular porous carbons. Moreover, gas-loaded single-crystal analysis, in-situ infrared spectroscopy measurements, and computational simulations demonstrate the accommodation patterns, interaction bonds, and energy pathways for olefin/paraffin separations.

A molecular sieve with ultrafast adsorption kinetics for propylene separation

The design of molecular sieves is vital for gas separation, but it suffers from a long-standing issue of slow adsorption kinetics due to the intrinsic contradiction between molecular sieving and diffusion within restricted nanopores. We report a molecular sieve ZU-609 with local sieving channels that feature molecular sieving gates and rapid diffusion channels. The precise cross-sectional cutoff of molecular sieving gates enables the exclusion of propane from propylene. The coexisting large channels constituted by sulfonic anions and helically arranged metal-organic architectures allow the fast adsorption kinetics of propylene, and the measured propylene diffusion coefficient in ZU-609 is one to two orders of magnitude higher than previous molecular sieves. Propylene with 99.9% purity is obtained through breakthrough experiments with a productivity of 32.2 L kg-1.

Optimizing Sieving Effect for CO2 Capture from Humid Air Using an Adaptive Ultramicroporous Framework

Excessive CO2 in the air can not only lead to serious climate problems but also cause serious damage to humans in confined spaces. Here, a novel metal-organic framework (FJI-H38) with adaptive ultramicropores and multiple active sites is prepared. It can sieve CO2 from air with the very high adsorption capacity/selectivity but the lowest adsorption enthalpy among the reported physical adsorbents. Such excellent adsorption performances can be retained even at high humidity. Mechanistic studies show that the polar ultramicropore is very suitable for molecular sieving of CO2 from N2 , and the distinguishable adsorption sites for H2 O and CO2 enable them to be co-adsorbed. Notably, the adsorbed-CO2 -driven pore shrinkage can further promote CO2 capture while the adsorbed-H2 O-induced phase transitions in turn inhibit H2 O adsorption. Moreover, FJI-H38 has excellent stability and recyclability and can be synthesized on a large scale, making it a practical trace CO2 adsorbent. This will provide a new strategy for developing practical adsorbents for CO2 capture from the air.

An aliphatic MOF with a molecular sieving effect for efficient C2H2/C2H4 separation

A metal-organic framework, SDMOF-1, with rigid pores of about 3.4 Å, which is appropriate for accommodating C2H2 molecules, exhibits high C2H2 adsorption capacity and great separation capability of the C2H2/C2H4 mixture. This work provides a new method to design aliphatic MOFs with a molecular sieving effect to realize efficient gas separation.

Photo-Responsive Carbon Capture over Metalloporphyrin-C60 Metal-Organic Frameworks via Charge-Transfer

Great efforts have been devoted to the study of photo-responsive adsorption, but its current methodology largely depends on the well-defined photochromic units and their photo-driven molecular deformation. Here, a methodology to fabricate nondeforming photo-responsive sorbents is successfully exploited. With C60-fullerene doping in metalloporphyrin metal-organic frameworks (PCN-M, M = Fe, Co, or Ni) and intensively interacting with the metalloporphyrin sites, effective charge-transfer can be achieved over the metalloporphyrin-C60 architectures once excited by the light at 350 to 780 nm. The electron density distribution and the resultant adsorption activity are thus changed by excited states, which are also stable enough to meet the timescale of microscopic adsorption equilibrium. The charge-transfer over Co(II)-porphyrin-C60 is proved to be more efficient than the Fe(II)- and Ni(II)-porphyrin-C60 sites, as well as than all the metalloporphyrin sites, so the CO2 adsorption capacity (CAC; at 0 °C and 1 bar) over the C60-doped PCN-Co can be largely improved from 2.05 mmol g-1 in the darkness to 2.69 mmol g-1 with light, increased by 31%, in contrast to photo-irresponsive CAC over all C60-undoped PCN-M sorbents and only the photo-loss CAC over C60.

Potential of nonporous adaptive crystals for hydrocarbon separation

Hydrocarbon separation is an important process in the field of petrochemical industry, which provides a variety of raw materials for industrial production and a strong support for the development of national economy. However, traditional separation processes involve huge energy consumption. Adsorptive separation based on nonporous adaptive crystal (NAC) materials is considered as an attractive green alternative to traditional energy-intensive separation technologies due to its advantages of low energy consumption, high chemical and thermal stability, excellent selective adsorption and separation performance, and outstanding recyclability. Considering the exceptional potential of NAC materials for hydrocarbon separation, this review comprehensively summarizes recent advances in various supramolecular host-based NACs. Moreover, the current challenges and future directions are illustrated in detail. It is expected that this review will provide useful and timely references for researchers in this area. Based on a large number of state-of-the-art studies, the review will definitely advance the development of NAC materials for hydrocarbon separation and stimulate more interesting studies in related fields.

Probing sub-5 Ångstrom micropores in carbon for precise light olefin/paraffin separation

Olefin/paraffin separation is an important but challenging and energy-intensive process in petrochemical industry. The realization of carbons with size-exclusion capability is highly desirable but rarely reported. Herein, we report polydopamine-derived carbons (PDA-Cx, where x refers to the pyrolysis temperature) with tailorable sub-5 Å micropore orifices together with larger microvoids by one-step pyrolysis. The sub-5 Å micropore orifices centered at 4.1-4.3 Å in PDA-C800 and 3.7-4.0 Å in PDA-C900 allow the entry of olefins while entirely excluding their paraffin counterparts, performing a precise cut-off to discriminate olefin/paraffin with sub-angstrom discrepancy. The larger voids enable high C₂H₄ and C₃H₆ capacities of 2.25 and 1.98 mmol g^-1 under ambient conditions, respectively. Breakthrough experiments confirm that a one-step adsorption-desorption process can obtain high-purity olefins. Inelastic neutron scattering further reveals the host-guest interaction of adsorbed C₂H₄ and C₃H₆ molecules in PDA-Cx. This study opens an avenue to exploit the sub-5 Å micropores in carbon and their desirable size-exclusion effect.

Dicopper(II) paddle-wheel metal-organic frameworks for high propyne storage under ambient conditions

Fluorinated dicopper(II) metal-organic framework JXNU-16F with 1,3,5-tri(3,5-bifluoro-4-carboxyphenyl)benzene ligands and nonfluorinated JXNU-16 exhibit high propyne uptakes of 443 and 496 cm³ g^-1 under ambient conditions, respectively. Their remarkable propyne uptakes result from suitable pore spaces and strong propyne⋯propyne interactions amongst the adsorbed propyne molecules, as revealed by computational simulations.

Benchmark single-step ethylene purification from ternary mixtures by a customized fluorinated anion-embedded MOF

Ethylene (C₂H₄) purification from multi-component mixtures by physical adsorption is a great challenge in the chemical industry. Herein, we report a GeF₆^2- anion embedded MOF (ZNU-6) with customized pore structure and pore chemistry for benchmark one-step C₂H₄ recovery from C₂H₂ and CO₂. ZNU-6 exhibits significantly high C₂H₂ (1.53 mmol/g) and CO₂ (1.46 mmol/g) capacity at 0.01 bar. Record high C₂H₄ productivity is achieved from C₂H₂/CO₂/C₂H₄ mixtures in a single adsorption process under various conditions. The separation performance is retained over multiple cycles and under humid conditions. The potential gas binding sites are investigated by density functional theory (DFT) calculations, which suggest that C₂H₂ and CO₂ are preferably adsorbed in the interlaced narrow channel with high aff0inity. In-situ single crystal structures with the dose of C₂H₂, CO₂ or C₂H₄ further reveal the realistic host-guest interactions. Notably, rare C₂H₂ clusters are formed in the narrow channel while two distinct CO₂ adsorption locations are observed in the narrow channel and the large cavity with a ratio of 1:2, which accurately account for the distinct adsorption heat curves.