Spin-related symmetry breaking induced by half-disordered hybridization in BixEr2-xRu2O7 pyrochlores for acidic oxygen evolution

Optimal Electrocatalyst Design Strategies for Acidic Oxygen Evolution

Hydrogen, a clean resource with high energy density, is one of the most promising alternatives to fossil. Proton exchange membrane water electrolyzers are beneficial for hydrogen production because of their high current density, facile operation, and high gas purity. However, the large-scale application of electrochemical water splitting to acidic electrolytes is severely limited by the sluggish kinetics of the anodic reaction and the inadequate development of corrosion- and highly oxidation-resistant anode catalysts. Therefore, anode catalysts with excellent performance and long-term durability must be developed for anodic oxygen evolution reactions (OER) in acidic media. This review comprehensively outlines three commonly employed strategies, namely, defect, phase, and structure engineering, to address the challenges within the acidic OER, while also identifying their existing limitations. Accordingly, the correlation between material design strategies and catalytic performance is discussed in terms of their contribution to high activity and long-term stability. In addition, various nanostructures that can effectively enhance the catalyst performance at the mesoscale are summarized from the perspective of engineering technology, thus providing suitable strategies for catalyst design that satisfy industrial requirements. Finally, the challenges and future outlook in the area of acidic OER are presented.

Spin Symmetry Breaking-Induced Hubbard Gap Near-Closure in N-Coordinated MnO2 for Enhanced Aqueous Zinc-Ion Battery Performance

Transition metal oxides (TMOs) are promising cathode materials for aqueous zinc ion batteries (ZIBs), however, their performance is hindered by a substantial Hubbard gap, which limits electron transfer and battery cyclability. Addressing this, we introduce a heteroatom coordination approach, using triethanolamine to induce axial N coordination on Mn centers in MnO2, yielding N-coordinated MnO2 (TEAMO). This approach leverages the change of electronegativity disparity between Mn and ligands (O and N) to disrupt spin symmetry and augment spin polarization. This enhancement leads to the closure of the Hubbard gap, primarily driven by the intensified occupancy of the Mn eg orbitals. The resultant TEAMO exhibit a significant increase in storage capacity, reaching 351 mAh g-1 at 0.1 A g-1. Our findings suggest a viable strategy for optimizing the electronic structure of TMO cathodes, enhancing the potential of ZIBs in energy storage technology.

Designing 3d Transition Metal Cation-Doped MRuOx As Durable Acidic Oxygen Evolution Electrocatalysts for PEM Water Electrolyzers

The continuous dissolution and oxidation of active sites in Ru-based electrocatalysts have greatly hindered their practical application in proton exchange membrane water electrolyzers (PEMWE). In this work, we first used density functional theory (DFT) to calculate the dissolution energy of Ru in the 3d transition metal-doped MRuOx (M = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, and Zn) to evaluate their stability for acidic oxygen evolution reaction (OER) and screen out ZnRuOx as the best candidate. To confirm the theoretical predictions, we experimentally synthesized these MRuOx materials and found that ZnRuOx indeed displays robust acidic OER stability with a negligible decay of η10 after 15 000 CV cycles. Of importance, using ZnRuOx as the anode, the PEMWE can run stably for 120 h at 200 mA cm-2. We also further uncover the stability mechanism of ZnRuOx, i.e., Zn atoms doped in the outside of ZnRuOx nanocrystal would form a "Zn-rich" shell, which effectively shortened average Ru-O bond lengths in ZnRuOx to strengthen the Ru-O interaction and therefore boosted intrinsic stability of ZnRuOx in acidic OER. In short, this work not only provides a new study paradigm of using DFT calculations to guide the experimental synthesis but also offers a proof-of-concept with 3d metal dopants as RuO2 stabilizer as a universal principle to develop high-durability Ru-based catalysts for PEMWE.

Oxygen Radical Coupling on Short-Range Ordered Ru Atom Arrays Enables Exceptional Activity and Stability for Acidic Water Oxidation

The discovery of efficient and stable electrocatalysts for oxygen evolution reaction (OER) in acid is vital for the commercialization of the proton-exchange membrane water electrolyzer. In this work, we demonstrate that short-range Ru atom arrays with near-ideal Ru-Ru interatomic distances and a unique Ru-O hybridization state can trigger direct O*-O* radical coupling to form an intermediate O*-O*-Ru configuration during acidic OER without generating OOH* species. Further, the Ru atom arrays suppress the participation of lattice oxygen in the OER and the dissolution of active Ru. Benefiting from these advantages, the as-designed Ru array-Co3O4 electrocatalyst breaks the activity/stability trade-off that plagues RuO2-based electrocatalysts, delivering an excellent OER overpotential of only 160 mV at 10 mA cm-2 in 0.5 M H2SO4 and outstanding durability during 1500 h operation, representing one of the best acid-stable OER electrocatalysts reported to date. 18O-labeled operando spectroscopic measurements together with theoretical investigations revealed that the short-range Ru atom arrays switched on an oxide path mechanism (OPM) during the OER. Our work not only guides the design of improved acidic OER catalysts but also encourages the pursuit of short-range metal atom array-based electrocatalysts for other electrocatalytic reactions.

Generic heterostructure interfaces bound to Co9S8 for efficient overall water splitting supported by photothermal

The increase of reaction temperature of electrocatalysts and the construction of heterogeneous structures is regarded as an efficient method to improve the electrocatalytic water splitting activity. Here, we report an approach to enhance the local heat and active sites of the catalyst by building a heterostructure with Co9S8 to significantly improve its electrocatalytic performance. The as-fabricated Co9S8@Ce-NiCo LDH/NF electrode possesses a notable photothermal ability, as it effectively converts near-infrared (NIR) light into the local heat, owing to its significant optical absorption. Leveraging these favorable qualities, the prepared Co9S8@Ce-NiCo LDH/NF electrode showed impressive performance in both hydrogen evolution reaction (HER) (η100 = 144 mV) and oxygen evolution reaction (OER) (η100 = 229 mV) under NIR light. Compared to the absence of the NIR light, the presence of NIR irradiation leads to a 24.6 % increase in catalytic efficiency for HER and a 15.8 % increase for OER. Additionally, other dual-functional electrocatalysts like NiCo-P, NiFeMo, and NiFe(OH)x also demonstrated significantly enhanced photothermal effects and improved catalytic performance owing to the augmented photothermal conversion when combined with Co9S8. This work offers novel pathways for the development of photothermal-electrocatalytic systems that facilitate economically efficient and energy-conserving overall water splitting processes.

Spin-state Conversion by Asymmetrical Orbital Hybridization in Ni-doped Co3 O4 to Boost Singlet Oxygen Generation for Microbial Disinfection

Singlet oxygen (1 O2 ) plays a significant role in environmental and biomedical disinfection fields. Electrocatalytic processes hold great potential for 1 O2 generation, but remain challenging. Herein, a facile Ni doping converted spin-state transition approach is reported for boosting 1 O2 production. Magnetic analysis and theoretical calculations reveal that Ni occupied at the octahedral site of Co3 O4 can effectively induce a low-to-high spin-state transition. The high-spin Ni-Co3 O4 generate appropriate binding strength and enhance electron transfer between the Co centers with oxygen intermediates, thereby improving the catalytic activity of Ni-Co3 O4 for effective generating 1 O2 . In neutral conditions, 1×106  CFU mL-1 Gram-negative ESBL-producing Escherichia coli (E. coli) could be inactivated by Ni-Co3 O4 system within 5 min. Further antibacterial mechanisms indicate that 1 O2 can lead to cell membrane damage and DNA degradation so as to irreversible cell death. Additionally, the developed Ni-Co3 O4 system can effectively inactivate bacteria from wastewater and bioaerosols. This work provides an effective strategy for designing high-spin electrocatalysis to boost 1 O2 generation for disinfection process.

MXene-mediated reconfiguration induces robust nickel-iron catalysts for industrial-grade water oxidation

Nickel-iron oxy/hydroxides (NiFeOxHy) emerge as an attractive type of electrocatalysts for alkaline water oxidation reaction (WOR), but which encounter a huge challenge in stability, especially at industrial-grade large current density due to uncontrollable Fe leakage. Here, we tailor the Fe coordination by a MXene-mediated reconfiguration strategy for the resultant NiFeOxHy catalyst to alleviate Fe leakage and thus reinforce the WOR stability. The introduction of ultrafine MXene with surface dangling bonds in the electrochemical reconfiguration over Ni-Fe Prussian blue analogue induces the covalent hybridization of NiFeOxHy/MXene, which not only accelerates WOR kinetics but also improves Fe oxidation resistance against segregation. As a result, the NiFeOxHy coupled with MXene exhibits an extraordinary durability at ampere-level current density over 1,000 h for alkaline WOR with an ultralow overpotential of only 307 mV. This work provides a broad avenue and mechanistic insights for the development of nickel-iron catalysts toward industrial applications.

The Promising Seesaw Relationship Between Activity and Stability of Ru-Based Electrocatalysts for Acid Oxygen Evolution and Proton Exchange Membrane Water Electrolysis

The development of electrocatalysts that are not reliant on iridium for efficient acid-oxygen evolution is a critical step towards the proton exchange membrane water electrolysis (PEMWE) and green hydrogen industry. Ruthenium-based electrocatalysts have garnered widespread attention due to their remarkable catalytic activity and lower commercial price. However, the challenge lies in balancing the seesaw relationship between activity and stability of these electrocatalysts during the acid-oxygen evolution reaction (OER). This review delves into the progress made in Ru-based electrocatalysts with regards to acid OER and PEMWE applications. It highlights the significance of customizing the acidic OER mechanism of Ru-based electrocatalysts through the coordination of adsorption evolution mechanism (AEM) and lattice oxygen oxidation mechanism (LOM) to attain the ideal activity and stability relationship. The promising tradeoffs between the activity and stability of different Ru-based electrocatalysts, including Ru metals and alloys, Ru single-atomic materials, Ru oxides, and derived complexes, and Ru-based heterojunctions, as well as their applicability to PEMWE systems, are discussed in detail. Furthermore, this paper offers insights on in situ control of Ru active sites, dynamic catalytic mechanism, and commercial application of PEMWE. Based on three-way relationship between cost, activity, and stability, the perspectives and development are provided.

Boosting electrocatalytic performance via electronic structure regulation for acidic oxygen evolution

High-purity hydrogen produced by water electrolysis has become a sustainable energy carrier. Due to the corrosive environments and strong oxidizing working conditions, the main challenge faced by acidic water oxidation is the decrease in the activity and stability of anodic electrocatalysts. To address this issue, efficient strategies have been developed to design electrocatalysts toward acidic OER with excellent intrinsic performance. Electronic structure modification achieved through defect engineering, doping, alloying, atomic arrangement, surface reconstruction, and constructing metal-support interactions provides an effective means to boost OER. Based on introducing OER mechanism commonly present in acidic environments, this review comprehensively summarizes the effective strategies for regulating the electronic structure to boost the activity and stability of catalytic materials. Finally, several promising research directions are discussed to inspire the design and synthesis of high-performance acidic OER electrocatalysts.

Ag Nanoparticles and Rod-Shaped AgCl Decorated Porous PEDOT as a Bifunctional Material for Hydrogen Evolution Catalyst and Supercapacitor Electrode

PEDOT-Ag/AgCl is a highly promising material with dual functions of hydrogen evolution reaction (HER) and supercapacitors. In this study, a simple low-temperature stirring and light irradiation method was used to synthesize PEDOT-Ag/AgCl on the surface. Then, PEDOT-Ag/AgCl was analyzed using X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy. PEDOT-Ag/AgCl reacted in 1 M KOH alkaline electrolyte with an overpotential of 157 mV at 20 mA·cm-2 and a Tafel slope of 66.95 mv·dec-1. Owing to the synergistic effect of PEDOT and Ag/AgCl, this material had a small resistance (1.7 Ω) and a large specific capacitance (978 F·g-1 at current density of 0.5 A·g-1). The synthesis method can prepare nanostructured PEDOT with uniformly-distributed Ag nanoparticles and rod-shaped AgCl on the surface, which can be used as both HER electrocatalysts and supercapacitor electrodes.

High Flux and Stability of Cationic Intercalation in Transition-Metal Oxides: Unleashing the Potential of Mn t2g Orbital via Enhanced π-Donation

Transition-metal oxides (TMOs) often struggle with challenges related to low electronic conductivity and unsatisfactory cyclic stability toward cationic intercalation. In this work, we tackle these issues by exploring an innovative strategy: leveraging heightened π-donation to activate the t2g orbital, thereby enhancing both electron/ion conductivity and structural stability of TMOs. We engineered Ni-doped layered manganese dioxide (Ni-MnO2), which is characterized by a distinctive Ni-O-Mn bridging configuration. Remarkably, Ni-MnO2 presents an impressive capacitance of 317 F g-1 and exhibits a robust cyclic stability, maintaining 81.58% of its original capacity even after 20,000 cycles. Mechanism investigations reveal that the incorporation of Ni-O-Mn configurations stimulates a heightened π-donation effect, which is beneficial to the π-type orbital hybridization involving the O 2p and the t2g orbital of Mn, thereby accelerating charge-transfer kinetics and activating the redox capacity of the t2g orbital. Additionally, the charge redistribution from Ni to the t2g orbital of Mn effectively elevates the low-energy orbital level of Mn, thus mitigating the undesirable Jahn-Teller distortion. This results in a subsequent decrease in the electron occupancy of the π*-antibonding orbital, which promotes an overall enhancement in structural stability. Our findings pave the way for an innovative paradigm in the development of fast and stable electrode materials for intercalation energy storage by activating the low orbitals of the TM center from a molecular orbital perspective.

Multistage orbital hybridization induced by multisite exchange interactions in high-entropy perovskites for high oxygen evolution reaction

The oxygen evolution reaction (OER) has garnered considerable attention because of its promising prospects in electrochemical energy conversion applications, but a significant challenge is faced by the insufficient understanding of sluggish OER kinetics. In fact, the intrinsic "acceptance-donation" process of electrons between active sites and reactants is responsible for improving OER activity. Herein, we suggest a multielement hybridization strategy to rematch spin electron occupation and energy splitting in high-entropy perovskites with multiple orbital coordination. In this concept, electronic hopping between t2g and eg orbitals among particular catalytic sites can be obviously enforced due to introducing more favorable energy levels from neighboring metal sites, which can demonstrate multistage orbital hybridization reaction activity. As a result, our proposed multistage-hybridized high-entropy perovskites display an impressive activity of 199.8 mA cm-2 as an overpotential of ∼0.46 V, which is ∼5.3 times that of pristine perovskite. Different from traditional catalyst designs, this study focuses on multistage orbital hybridization and electron exchange interactions through a multisite coordination mechanism to construct a fast reaction pathway. Our findings provide a new strategy for accelerating OER catalytic kinetics.

Modulating the electronic structures of cobalt-organic frameworks for efficient electrocatalytic oxygen evolution

The oxygen evolution reaction (OER) is a key process in various energy storage/generation technologies. Tuning the electronic structures of catalysts is an effective approach to improve the catalyst's activity. In this work, we synthesized Ce-doped cobalt-organic frameworks with benzene-1, 4-dicarboxylic acid (BDC) as the ligand as efficient OER electrocatalysts (denoted as Co3Ce1 BDC) with excellent stability and improved catalytic performance. The introduced Ce in Co3Ce1 BDC changes the surface configuration and tunes electronic structures of the active Co site, leading to enhanced interaction between intermediates and catalysts. Besides, the specific surface area, reaction kinetics, charge transfer efficiency, and turnover frequency are also improved in the presence of Ce. As a result, the Co3Ce1 BDC demonstrated excellent performance with a low overpotential of 285 mV at a current of 10 mA·cm-2, a preferable Tafel slope of 56.1 mV·dec-1, and an excellent durability in 1 M KOH, indicating the potential for practical applications in water splitting and other energy storage technologies wherein the OER plays a critical role. Comprehensive theoretical calculations and modeling further identified the key role of Ce in modulating the electronic structure and OER activity of cobalt-organic frameworks. Most importantly, this work provides a new strategy to the development of efficient cobalt-organic framework catalysts in OER-related applications.

Oxygen Vacancy-Enhanced Centrosymmetric Breaking of SrFeO3- x for Piezoelectric-Catalyzed Synthesis of H2 O2

Normally, only noncentrosymmetric structure of the materials can potentially be piezoelectric. Thus, it is limited in the field of piezoelectricity for the centrosymmetric structure of the material. In this work, the performance of piezoelectricity is successfully achieved from centrosymmetric SrFeO3- x by modulating oxygen vacancies, which have a surface piezoelectric potential up to 93 mV by using Kelvin-probe force microscopy (KPFM). Moreover, the piezoelectric effects of SrFeO3- x are also evaluated by piezoelectric catalytic effect and density functional theory calculations (DFT). The results show that the piezo-catalytic degradation of tetracycline reaches 96% after 75 min by ultrasonic mechanical vibration and the production of H2 O2 by SrFeO3- x piezoelectric synthesis could reach 1821 µmol L-1 . In addition, the DFT results indicate that the intrinsic effect of oxygen vacancies effectively promotes the adsorption and activation of O2 and H2 O as well as intermediates and improves the piezoelectric catalytic activity. This work provides an effective basis for realizing the piezoelectricity of centrosymmetric materials and regulating the development of piezoelectric catalytic properties.

Insights into Chemical Bonds for Eliminating the Depletion Region and Accelerating the Photo-Induced Charge Efficient Separation toward Ultrasensitive Photoelectrochemical Sensing

The empty-space-induced depletion region in photoelectrodes severely exacerbates the recombination of electron-hole pairs, thereby reducing the photoelectrochemical (PEC) analytical performance. Herein, the chemical bond that can suppress the potential barrier and overcome the high energy barrier of out-of-plane Ohmic or Schottky contact is introduced into the PEC sensor to eliminate the depletion region and dramatically promote the separation of electron-hole pairs. Specifically, three-dimensional (3D) hierarchically wheatear-like TiO2 (HWT) nanostructures featuring a large surface area to absorb incident light are crafted as the substrate. The facile carbonized strategy is further employed to engineer the Ti-C chemical bond, serving as the touchstone. The average PL lifetime of HWT-C (4.14 ns) is much shorter than that of the 3D HWT (8.57 ns) due to the promoting effect of the chemically bonded structure on carrier separation. Consequently, the 3D HWT-C covalent photoelectrode (600 μA/cm2) exhibits a 3.6-fold increase in photocurrent density compared with the 3D HWT (167 μA/cm2). Ultimately, the model analyte of the tumor marker is detected, and the linear range is 0.02 ng/mL-100 ng/mL with a detection limitation of 0.007 ng/mL. This work provides a basic understanding of chemical bonds in tuning charge separation and insights on strategies for designing high-performance PEC sensors.

Mixed Plastics Wastes Upcycling with High-Stability Single-Atom Ru Catalyst

Mixed plastic waste treatment has long been a significant challenge due to complex composition and sorting costs. In this study, we have achieved a breakthrough in converting mixed plastic wastes into a single chemical product using our innovative single-atom catalysts for the first time. The single-atom Ru catalyst can convert ∼90% of real mixed plastic wastes into methane products (selectivity >99%). The unique electronic structure of Ru sites regulates the adsorption energy of mixed plastic intermediates, leading to rapid decomposition of mixed plastics and superior cycle stability compared to traditional nanocatalysts. The global warming potential of the entire process was evaluated. Our proposed carbon-reducing process utilizing single-atom catalysts launches a new era of mixed plastic waste valorization.

Ruthenium-Manganese Solid Solution Oxide with Enhanced Performance for Acidic and Alkaline Oxygen Evolution Reaction

Proton exchange membrane water electrolysers and alkaline exchange membrane water electrolysers for hydrogen production suffer from sluggish kinetics and the limited durability of the electrocatalyst toward oxygen evolution reaction (OER). Herein, a rutile Ru0.75 Mn0.25 O2-δ solid solution oxide featured with a hierarchical porous structure has been developed as an efficient OER electrocatalyst in both acidic and alkaline electrolyte. Specifically, compared with commercial RuO2 , the catalyst displays a superior reaction kinetics with small Tafel slope of 54.6 mV dec-1 in 0.5 M H2 SO4 , thus allowing a low overpotential of 237 and 327 mV to achieve the current density of 10 and 100 mA cm-2 , respectively, which is attributed to the enhanced electrochemically active surface area from the porous structure and the increased intrinsic activity owing to the regulated Ru>4+ proportion with Mn incorporation. Additionally, the sacrificial dissolution of Mn relieves the leaching of active Ru species, leading to the extended OER durability. Besides, the Ru0.75 Mn0.25 O2-δ catalyst also shows a highly improved OER performance in alkaline electrolyte, rendering it a versatile catalyst for water splitting.

Manipulating the Dynamic Self-Reconstruction of CoP Electrocatalyst Driven by Charge Transport and Ion Leaching

Surface reconstruction of electrocatalysts is very important to clarify the structure-component-activity relationship. In this work, in situ Raman and ex situ technologies are used to capture the surface structure evolution of F-Fe-CoP during the oxygen evolution reaction (OER). The results reveal that the leaching of F accelerates the dynamic reconstruction response of CoP to rapidly convert into active (oxy)hydroxide species. The further introduction of Fe can accelerate the charge transfer rate and alleviate the structural stacking caused by insufficient kinetics. The introduction of F and Fe increases the electron occupation states of cobalt sites and promotes the adsorption of OH- ions on the CoP catalyst, which significantly improves the OER performance. F-Fe-CoP exhibits excellent OER performance with an overpotential of 259 mV at 20 mA cm-2 . This finding enriches the OER mechanism associated with the surface reconstruction of CoP and provides a reference for the rational design of efficient electrocatalysts.

RuO2 nanoparticles anchored on g-C3N4 as an efficient bifunctional electrocatalyst for water splitting in acidic media

The electrolysis of water, particularly proton exchange membrane (PEM) water electrolysis, holds great promise for hydrogen production in industry. However, the catalyst used in this process is prone to dissolution in acidic environments, making it imperative to develop cost-effective, highly efficient, and acid-stable electrocatalytic materials to overcome this challenge and enable large-scale application of PEM water electrolysis technology. Herein, we prepared ruthenium oxide (RuO₂)/graphitic carbon nitride (g-C₃N₄) composites (RuO₂/C₃N₄) via a combination of sol-gel and annealing methods. The g-C₃N₄ provides a large surface area, while RuO₂ is uniformly deposited on the g-C₃N₄ surface. The interaction between g-C₃N₄ and RuO₂ stabilizes the RuO₂ nanoparticles and enhances long-term water oxidation stability. This unique structure and the combined advantages of RuO₂ and g-C₃N₄ yield exceptional electrocatalytic activity toward both the oxygen evolution reaction (OER, 240 mV@10 mA cm^-2) and the hydrogen evolution reaction (HER, 109 mV@10 mA cm^-2), with excellent durability (over 28 h), and a cell voltage of 1.607 V at 10 mA cm^-2 when used in an RuO₂/C₃N₄||RuO₂/C₃N₄ electrolyzer. This study highlights the efficacy of the g-C₃N₄ support method in designing highly stable Ru-based OER electrocatalysts for efficient acidic water splitting.

Cascade energy transfer boosted near-infrared circularly polarized luminescence of nanofibers from an exclusively achiral system

We constructed chiral supramolecular nanofibers for light harvesting based on symmetry-breaking, and these can generate near-infrared circularly polarized luminescence (CPL) with high dissymmetry factor (g_lum) through a synergistic energy transfer and chirality transfer process. Firstly, the achiral molecule BTABA was assembled into a symmetry-breaking assembly using a seeded vortex strategy. Subsequently, the chiral assembly can endow the two achiral acceptors, Nile Red (NR) and Cyanine 7 (CY7), with supramolecular chirality, as well as chiroptical properties. CY7 can reach an excited state and emit near-infrared light through a cascade energy transfer process from BTABA to NR and then to CY7, but cannot directly acquire energy from the excited BTABA. Significantly, the near-infrared CPL of CY7 can be obtained with a boosted g_lum value of 0.03. This work will provide a deep insight into the preparation of materials with near-infrared CPL activity from an exclusively achiral system.

Dynamic orbital hybridization triggered spin-disorder renormalization via super-exchange interaction for oxygen evolution reaction

The oxygen evolution reaction (OER) underpins many aspects of energy storage and conversion in modern industry and technology, but which still be suffering from the dilemma of sluggish reaction kinetics and poor electrochemical performance. Different from the viewpoint of nanostructuring, this work focuses on an intriguing dynamic orbital hybridization approach to renormalize the disordering spin configuration in porous noble-metal-free metal-organic frameworks (MOFs) to accelerate the spin-dependent reaction kinetics in OER. Herein, we propose an extraordinary super-exchange interaction to reconfigure the domain direction of spin nets at porous MOFs through temporarily bonding with dynamic magnetic ions in electrolytes under alternating electromagnetic field stimulation, in which the spin renormalization from disordering low-spin state to high-spin state facilitates rapid water dissociation and optimal carrier migration, leading to a spin-dependent reaction pathway. Therefore, the spin-renormalized MOFs demonstrate a mass activity of 2,095.1 A gmetal-1 at an overpotential of 0.33 V, which is about 5.9 time of pristine ones. Our findings provide a insight into reconfiguring spin-related catalysts with ordering domain directions to accelerate the oxygen reaction kinetics.

Activity-Stability Balance: The Role of Electron Supply Effect of Support in Acidic Oxygen Evolution

Developing efficient and durable electrocatalysts for the oxygen evolution reaction (OER) in proton exchange membrane (PEM) electrolyzers represents a significant challenge. Herein, the cobalt-ruthenium oxide nano-heterostructures are successfully synthesized on carbon cloth (CoO_x /RuO_x -CC) for acidic OER through a simple and fast solution combustion strategy. The rapid oxidation process endows CoO_x /RuO_x -CC with abundant interfacial sites and defect structures, which enhances the number of active sites and the charge transfer at the electrolyte-catalyst interface, promoting the OER kinetics. Moreover, the electron supply effect of the CoO_x support allows electrons to transfer from Co to Ru sites during the OER process, which is beneficial to alleviate the ion leaching and over-oxidation of Ru sites, improving the catalyst activity and stability. As a self-supported electrocatalyst, CoO_x /RuO_x -CC displays an ultralow overpotential of 180 mV at 10 mA cm^-2 for OER. Notably, the PEM electrolyzer using CoO_x /RuO_x -CC as the anode can be operated at 100 mA cm^-2 stably for 100 h. Mechanistic analysis shows that the strong catalyst-support interaction is beneficial to redistribute the electronic structure of RuO bond to weaken its covalency, thereby optimizing the binding energy of OER intermediates and lowering the reaction energy barrier.

Photo-induced heterogeneous regeneration of Fe(Ⅱ) in Fenton reaction for efficient polycyclic antibiotics removal and in-depth charge transfer mechanism

Fenton reaction is regarded as a potential treatment for antibiotics removal, but challenges remain due to the sluggish reaction kinetics of Fe(III) reduction and incomplete degradation from insufficient active substance. Distinguished from traditional Fe(Ⅱ) regeneration techniques, this work focuses on utilizing the aliovalent redox pairs and built-in electric field to induce photo-excited electrons to cross the material interface and achieve Fe(III) reduction (heterogeneous regeneration). Herein, oxygen-deficient CeO₂ particles are anchored on metal-organic frameworks (MIL-88A) and thus constitute the heterojunction with enhanced photoelectric properties, accelerating the directional charge transfer. Consequently, the synthesized MIL-88A/CeO₂(OV) composite can degrade 95.76% of oxytetracycline within 60 min in photo-Fenton reaction and maintain a high mineralization rate (75.33%) after 4 cyclic tests. Furthermore, the charge transfer mechanisms of Fe cycle and antibiotics mineralization are both unveiled via experiment results and theorical calculation. This work proposes a new paradigm for constructing self-sufficient photo-Fenton catalytic system for efficient and sustainable removal of polycyclic antibiotics.

Recent Advances in Manganese-Based Materials for Electrolytic Water Splitting

Developing earth-abundant and highly effective electrocatalysts for electrocatalytic water splitting is a prerequisite for the upcoming hydrogen energy society. Recently, manganese-based materials have been one of the most promising candidates to replace noble metal catalysts due to their natural abundance, low cost, adjustable electronic properties, and excellent chemical stability. Although some achievements have been made in the past decades, their performance is still far lower than that of Pt. Therefore, further research is needed to improve the performance of manganese-based catalytic materials. In this review, we summarize the research progress on the application of manganese-based materials as catalysts for electrolytic water splitting. We first introduce the mechanism of electrocatalytic water decomposition using a manganese-based electrocatalyst. We then thoroughly discuss the optimization strategy used to enhance the catalytic activity of manganese-based electrocatalysts, including doping and defect engineering, interface engineering, and phase engineering. Finally, we present several future design opportunities for highly efficient manganese-based electrocatalysts.

Effects of Alternating Magnetic Fields on the OER of Heterogeneous Core-Shell Structured NiFe2O4@(Ni, Fe)S/P

Composition optimization, structural design, and introduction of external magnetic fields into the catalytic process can remarkably improve the oxygen evolution reaction (OER) performance of a catalyst. NiFe₂O₄@(Ni, Fe)S/P materials with a heterogeneous core-shell structure were prepared by the sulfide/phosphorus method based on spinel-structured NiFe₂O₄ nanomicrospheres. After the sulfide/phosphorus treatment, not only the intrinsic activity of the material and the active surface area were increased but also the charge transfer resistance was reduced due to the internal electric field. The overpotential of NiFe₂O₄@(Ni, Fe)P at 10 mA cm^-2 (iR correction), Tafel slope, and charge transfer resistance were 261 mV, 42 mV dec^-1, and 3.163 Ω, respectively. With an alternating magnetic field, the overpotential of NiFe₂O₄@(Ni, Fe)P at 10 mA cm^-2 (without iR correction) declined by 45.5% from 323 mV (0 mT) to 176 mV (4.320 mT). Such enhancement of performance is primarily accounted for the enrichment of the reactive ion OH^- on the electrode surface induced by the inductive electric potential derived from the Faraday induction effect of the AMF. This condition increased the electrode potential and thus the charge transfer rate on the one hand and weakened the diffusion of the active substance from the electrolyte to the electrode surface on the other hand. The OER process was dominantly controlled by the charge transfer process under low current conditions. A fast charge transfer rate boosted the OER performance of the catalyst. At high currents, diffusion exerted a significant effect on the OER process and low OH^- diffusion rates would lead to a decrease in the OER performance of the catalyst.

Long-Term Stability Challenges and Opportunities in Acidic Oxygen Evolution Electrocatalysis

Polymer electrolyte membrane water electrolysis (PEMWE) has been regarded as a promising technology for renewable hydrogen production. However, acidic oxygen evolution reaction (OER) catalysts with long-term stability impose a grand challenge in its large-scale industrialization. In this review, critical factors that may lead to catalyst's instability in couple with potential solutions are comprehensively discussed, including mechanical peeling, substrate corrosion, active-site over-oxidation/dissolution, reconstruction, oxide crystal structure collapse through the lattice oxygen-participated reaction pathway, etc. Last but not least, personal prospects are provided in terms of rigorous stability evaluation criteria, in situ/operando characterizations, economic feasibility and practical electrolyzer consideration, highlighting the ternary relationship of structure evolution, industrial-relevant activity and stability to serve as a roadmap towards the ultimate application of PEMWE.

Single atomic Ru in TiO2 boost efficient electrocatalytic water oxidation to hydrogen peroxide

Electrocatalytic two-electron water oxidation affords a promising approach for distributed production of H₂O₂ using electricity. However, it suffers from the trade-off between the selectivity and high production rate of H₂O₂ due to the lack of suitable electrocatalysts. In this study, single atoms of Ru were controllably introduced into titanium dioxide to produce H₂O₂ through an electrocatalytic two-electron water oxidation reaction. The adsorption energy values of OH intermediates could be tuned by introducing Ru single atoms, offering superior H₂O₂ production under high current density. Notably, a Faradaic efficiency of 62.8% with an H₂O₂ production rate of 24.2 μmol min^-1 cm^-2 (>400 ppm within 10 min) was achieved at a current density of 120 mA cm^-2. Consequently, herein, the possibility of high-yield H₂O₂ production under high current density was demonstrated and the importance of regulating intermediate adsorption during electrocatalysis was evidenced.

Integrating Photoluminescence and Ferromagnetism in Carbon Quantum Dot/ZnO by Interfacial Orbital Hybridization for Multifunctional Bioprobes

Integrating ferromagnetism (FM) and photoluminescence (PL) into one particular nanostructure as biological probe plays an irreplaceable role in accurate clinical diagnosis combining magnetic resonance and photoluminescence imaging technology. However, magnetic emergence generally needs a spin polarization at Fermi level to display a half-metallic electronic feature, which is not beneficial for preserving radiation recombination ability of photo-excited electron-hole carriers. To overcome this intrinsic difficulty, we propose a feasible atomic-hybridization strategy to anchor carbon quantum dots (CQDs) onto ZnO microsphere surface via breakage of C=O bonds at CQDs and subsequent Zn-3d and C-2p orbital hybridization, which not only ensures the carrier recombination but also leads to a room-temperature magnetism. Herein, the photoluminescence and magnetism coexist in this multifunctional heterojunction with outstanding biocompatibility. This work suggests that integration of magnetism and photoluminescence could be accomplished by particular interfacial orbital hybridization.

Hydrogen Evolution Reaction Activities of Room-Temperature Self-Grown Glycerol-Assisted Nickel Chloride Nanostructures

Three-dimensional nanomaterials of desired structural/morphological properties and highly porous with a high specific surface area are important in a variety of applications. In this work, glycerol-mediated self-growth of 3-D dandelion flower-like nickel chloride (NiCl2) from nickel-foam (NiF) is obtained for the first time using a room-temperature (27 °C) processed wet chemical method for electrocatalysis application. Glycerol-mediated self-grown NiCl2 flowers demonstrate an excellent electrocatalytic performance towards the hydrogen evolution reaction (HER), which is much superior to the NiF (303 mV) and NiCl2 electrode prepared without glycerol (208 mV) in the same electrolyte solution. With a Tafel slope of 41 mV dec−1, the NiCl2 flower electrode confirms improved reaction kinetics as compared to the other two electrodes, i.e., NiF (106 mVdec−1) and NiCl2 obtained without glycerol (56 mV dec−1). The stability of the glycerol-based NiCl2 electrode has further been carried out for 2000 cycles with the overpotential diminution of just 8 mV, approving an electrocatalyst potential of glycerol-based NiCl2 electrode towards HER kinetics. This simple and easy growth process involves nucleation, aggregation, and crystal growth steps for producing NiCl2 nanostructures for electrocatalytic water splitting application through the HER process.

In Situ Surface Reconstruction of Catalysts for Enhanced Hydrogen Evolution

The in situ surface reconstitution of a catalyst for hydrogen evolution refers to its structure evolution induced by strong interactions with reaction intermediates during the hydrogen evolution reaction (HER), which eventually leads to the self-optimization of active sites. In consideration of the superior performance that can be achieved by in situ surface reconstitution, more and more attention has been paid to the relationship between active site structure evolution and the self-optimization of HER activity. More and more in situ and/or operando techniques have been explored to track the dynamic structural evolution of HER catalysts in order to clarify the underlying mechanism. This review summarizes recent advances in various types of reconstruction such as the reconfiguration of crystallinity, morphological evolution, chemical composition evolution, phase transition refactoring, surface defects, and interface refactoring in the HER process. Finally, different perspectives and outlooks are offered to guide future investigations. This review is expected to provide some new clues for a deeper understanding of in situ surface reconfiguration in hydrogen evolution reactions and the targeted design of catalysts with desirable structures.

Oxygen Evolution Electrocatalysts for the Proton Exchange Membrane Electrolyzer: Challenges on Stability

Hydrogen generated by proton exchange membrane (PEM) electrolyzer holds a promising potential to complement the traditional energy structure and achieve the global target of carbon neutrality for its efficient, clean, and sustainable nature. The acidic oxygen evolution reaction (OER), owing to its sluggish kinetic process, remains a bottleneck that dominates the efficiency of overall water splitting. Over the past few decades, tremendous efforts have been devoted to exploring OER activity, whereas most show unsatisfying stability to meet the demand for industrial application of PEM electrolyzer. In this review, systematic considerations of the origin and strategies based on OER stability challenges are focused on. Intrinsic deactivation of the material and the extrinsic balance of plant-induced destabilization are summarized. Accordingly, rational strategies for catalyst design including doping and leaching, support effect, coordination effect, strain engineering, phase and facet engineering are discussed for their contribution to the promoted OER stability. Moreover, advanced in situ/operando characterization techniques are put forward to shed light on the OER pathways as well as the structural evolution of the OER catalyst, giving insight into the deactivation mechanisms. Finally, outlooks toward future efforts on the development of long-term and practical electrocatalysts for the PEM electrolyzer are provided.

Review on Magnetism in Catalysis: From Theory to PEMFC Applications of 3d Metal Pt-Based Alloys

The relationship between magnetism and catalysis has been an important topic since the mid-20th century. At present time, the scientific community is well aware that a full comprehension of this relationship is required to face modern challenges, such as the need for clean energy technology. The successful use of (para-)magnetic materials has already been corroborated in catalytic processes, such as hydrogenation, Fenton reaction and ammonia synthesis. These catalysts typically contain transition metals from the first to the third row and are affected by the presence of an external magnetic field. Nowadays, it appears that the most promising approach to reach the goal of a more sustainable future is via ferromagnetic conducting catalysts containing open-shell metals (i.e., Fe, Co and Ni) with extra stabilization coming from the presence of an external magnetic field. However, understanding how intrinsic and extrinsic magnetic features are related to catalysis is still a complex task, especially when catalytic performances are improved by these magnetic phenomena. In the present review, we introduce the relationship between magnetism and catalysis and outline its importance in the production of clean energy, by describing the representative case of 3d metal Pt-based alloys, which are extensively investigated and exploited in PEM fuel cells.