Modeling human HSV infection via a vascularized immune-competent skin-on-chip platform

Advances in Skin-on-a-Chip Technologies for Dermatological Disease Modeling

Skin-on-a-chip (SoC) technologies are emerging as a paradigm shift in dermatology research by replicating human physiology in a dynamic manner not achievable by current animal models. Although animal models have contributed to successful clinical trials, their ability to predict human outcomes remains questionable, owing to inherent differences in skin anatomy and immune response. Covering areas including infectious diseases, autoimmune skin conditions, wound healing, drug toxicity, aging, and antiaging, SoC aims to circumvent the inherent disparities created by traditional models. In this paper, we review current SoC technologies, highlighting their potential as an alternative to animal models for a deeper understanding of complex skin conditions.

A biopsy-sized 3D skin model with a perifollicular vascular plexus enables studying immune cell trafficking in the skin

Human skin vasculature features a unique anatomy in close proximity to the skin appendages and acts as a gatekeeper for constitutive lymphocyte trafficking to the skin. Approximating such structural complexity and functionality in 3D skin models is an outstanding tissue engineering challenge. In this study, we leverage the capabilities of the digital-light-processing bioprinting to generate an anatomically-relevant and miniaturized 3D skin-on-a-chip (3D-SoC) model in the size of a 6 mm punch biopsy. The 3D-SoC contains a perfusable vascular network resembling the superficial vascular plexus of the skin and closely surrounding bioengineered hair follicles. The perfusion capabilities of the 3D-SoC enables the circulation of immune cells, and high-resolution imaging of the immune cell-endothelial cell interactions, namely tethering, rolling, and extravasation in real-time. Moreover, the vascular pattern in 3D-SoC captures the physiological range of shear rates found in cutaneous blood vessels and allows for studying the effect of shear rate on T cell trafficking. In 3D-SoC, as expected,in vitro-polarized T helper 1 (Th1) cells show a stronger attachment on the vasculature compared to naïve T cells. Both naïve and T cells exhibit higher retention in the low-shear zones in the early stages (<5 min) of T cell attachment. Interestingly, at later stages T cell retention rate becomes independent of the shear rate. The attached Th1 cells further transmigrate from the vessel walls to the extracellular space and migrate toward the bioengineered hair follicles and interfollicular epidermis. When the epidermis is not present, Th1 cell migration toward the epidermis is significantly hindered, underscoring the role of epidermal signals on T cell infiltration. Our data validates the capabilities of 3D-SoC model to study the interactions between immune cells and skin vasculature in the context of epidermal signals. The biopsy-sized 3D-SoC model in this study represents a new level of anatomical and cellular complexity, and brings us a step closer to generating a truly functional human skin with its tissue-specific vasculature and appendages in the presence of circulating immune cells.

Small Animal Models to Study Herpes Simplex Virus Infections

Herpes simplex virus type 1 (HSV-1) and herpes simplex virus type 2 (HSV-2) are two of the most prevalent human viruses worldwide. They are known to cause a variety of diseases including genital herpes, meningitis, encephalitis, cold sores and herpes stromal keratitis. The seropositive rate for HSV-1 is around 90%, whereas for HSV-2 it remains around 20-25% for the general adult population. The infections caused by these viruses remain difficult to study because a large proportion of infected individuals are asymptomatic. Furthermore, given the neurotropic characteristics of the virus, studies aimed at understanding the complex pathogenesis in humans is difficult. As a result, animal models have been developed to understand several characteristics of HSV biology, pathogenesis, disease and host responses to infection. These models are also commonly used as the first evaluation of new drugs and vaccines. There are several well-established animal models to study infection with HSV, including mice, guinea pigs and rabbits. Variables within the animal models depend on the species of animal, route of infection, viral strain, dosage, etc. This review aims at summarizing the most commonly used animal models to study HSV pathogenesis and therapies.

3D Bioprinted Human Skin Model Recapitulating Native-Like Tissue Maturation and Immunocompetence as an Advanced Platform for Skin Sensitization Assessment

Physiologically-relevant in vitro skin models hold the utmost importance for efficacy assessments of pharmaceutical and cosmeceutical formulations, offering valuable alternatives to animal testing. Here, an advanced immunocompetent 3D bioprinted human skin model is presented to assess skin sensitization. Initially, a photopolymerizable bioink is formulated using silk fibroin methacrylate, gelatin methacrylate, and photoactivated human platelet releasate. The developed bioink shows desirable physicochemical and rheological attributes for microextrusion bioprinting. The tunable physical and mechanical properties of bioink are modulated through variable photocuring time for optimization. Thereafter, the bioink is utilized to 3D bioprint "sandwich type" skin construct where an artificial basement membrane supports a biomimetic epidermal layer on one side and a printed pre-vascularized dermal layer on the other side within a transwell system. The printed construct is further cultured in the air-liquid interface for maturation. Immunofluorescence staining demonstrated a differentiated keratinocyte layer and dermal extracellular matrix (ECM)-remodeling by fibroblasts and endothelial cells. The biochemical estimations and gene-expression analysis validate the maturation of the printed model. The incorporation of macrophages further enhances the physiological relevance of the model. This model effectively classifies skin irritative and non-irritative substances, thus establishing itself as a suitable pre-clinical screening platform for sensitization tests.

Modelling Human Hair Follicles-Lessons from Animal Models and Beyond

The hair follicle is a specialized appendage of the skin that is critical for multiple functions, including thermoregulation, immune surveillance, and sebum production. Mammals are born with a fixed number of hair follicles that develop embryonically. Postnatally, these hair follicles undergo regenerative cycles of regression and growth that recapitulate many of the embryonic signaling pathways. Furthermore, hair cycles have a direct impact on skin regeneration in homeostasis, cutaneous wound healing, and disease conditions such as alopecia. Here, we review the current knowledge of hair follicle formation during embryonic development and the post-natal hair cycle, with an emphasis on the molecular signaling pathways underlying these processes. We then discuss efforts to capitalize on the field's understanding of in vivo mechanisms to bioengineer hair follicles or hair-bearing skin in vitro and how such models may be further improved to develop strategies for hair regeneration.

Organ-on-chip models for infectious disease research

Research on microbial pathogens has traditionally relied on animal and cell culture models to mimic infection processes in the host. Over recent years, developments in microfluidics and bioengineering have led to organ-on-chip (OoC) technologies. These microfluidic systems create conditions that are more physiologically relevant and can be considered humanized in vitro models. Here we review various OoC models and how they have been applied for infectious disease research. We outline the properties that make them valuable tools in microbiology, such as dynamic microenvironments, vascularization, near-physiological tissue constitutions and partial integration of functional immune cells, as well as their limitations. Finally, we discuss the prospects for OoCs and their potential role in future infectious disease research.

Vascularized 3D Human Skin Models in the Forefront of Dermatological Research

In vitro engineered skin models are emerging as an alternative platform to reduce and replace animal testing in dermatological research. Despite the progress made in recent years, considerable challenges still exist for the inclusion of diverse cell types within skin models. Blood vessels, in particular, are essential in maintaining tissue homeostasis and are one of many primary contributors to skin disease inception and progression. Substantial efforts in the past have allowed the successful fabrication of vascularized skin models that are currently utilized for disease modeling and drugs/cosmetics testing. This review first discusses the need for vascularization within tissue-engineered skin models, highlighting their role in skin grafting and disease pathophysiology. Second, the review spotlights the milestones and recent progress in the fabrication and utilization of vascularized skin models. Additionally, advances including the use of bioreactors, organ-on-a-chip devices, and organoid systems are briefly explored. Finally, the challenges and future outlook for vascularized skin models are addressed.

Vasculature-on-a-chip technologies as platforms for advanced studies of bacterial infections

Bacterial infections frequently occur within or near the vascular network as the vascular network connects organ systems and is essential in delivering and removing blood, essential nutrients, and waste products to and from organs. In turn, the vasculature plays a key role in the host immune response to bacterial infections. Technological advancements in microfluidic device design and development have yielded increasingly sophisticated and physiologically relevant models of the vasculature including vasculature-on-a-chip and organ-on-a-chip models. This review aims to highlight advancements in microfluidic device development that have enabled studies of the vascular response to bacteria and bacterial-derived molecules at or near the vascular interface. In the first section of this review, we discuss the use of parallel plate flow chambers and flow cells in studies of bacterial adhesion to the vasculature. We then highlight microfluidic models of the vasculature that have been utilized to study bacteria and bacterial-derived molecules at or near the vascular interface. Next, we review organ-on-a-chip models inclusive of the vasculature and pathogenic bacteria or bacterial-derived molecules that stimulate an inflammatory response within the model system. Finally, we provide recommendations for future research in advancing the understanding of host-bacteria interactions and responses during infections as well as in developing innovative antimicrobials for preventing and treating bacterial infections that capitalize on technological advancements in microfluidic device design and development.

Ink-spiring innovations: 3D bioprinting skin models for disease discovery

Tweetable abstract Inflammatory skin diseases account for most chronic skin conditions. 3D bioprinting is an exciting technology that can revolutionize the understanding and approach to treatment of atopic dermatitis and graft-versus-host disease.

Food allergen sensitization on a chip: the gut-immune-skin axis

The global population is growing, rapidly increasing the demand for sustainable, novel, and safe food proteins with minimal risks of food allergy. In vitro testing of allergy-sensitizing capacity is predominantly based on 2D assays. However, these lack the 3D environment and crosstalk between the gut, skin, and immune cells essential for allergy prediction. Organ-on-a-chip (OoC) technologies are promising to study type 2 immune activation required for sensitization, initiated in the small intestine or skin, in interlinked systems. Increasing the mechanistic understanding and, moreover, finding new strategies to study interorgan communication is of importance to recapitulate food allergen sensitization in vitro. Here, we outline recently developed OoC platforms and discuss the features needed for reliable prediction of sensitizing allergenicity of proteins.

Organ-On-A-Chip: An Emerging Research Platform

In drug development, conventional preclinical and clinical testing stages rely on cell cultures and animal experiments, but these methods may fall short of fully representing human biology. To overcome this limitation, the emergence of organ-on-a-chip (OOC) technology has sparked interest as a transformative approach in drug testing research. By closely replicating human organ responses to external signals, OOC devices hold immense potential in revolutionizing drug efficacy and safety predictions. This review focuses on the advancements, applications, and prospects of OOC devices in drug testing. Based on the latest advances in the field of OOC systems and their clinical applications, this review reflects the effectiveness of OOC devices in replacing human volunteers in certain clinical studies. This review underscores the critical role of OOC technology in transforming drug testing methodologies.

Human skin-on-a-chip for mpox pathogenesis studies and preclinical drug evaluation

Timely intervention of preventative and therapeutic measures abated a 2022 mpox global outbreak. However, the high transmissibility and unique pathological characteristics of mpox demand further investigation. Here, we discuss the potentials of human skin-on-a-chip as a valuable model for mpox disease evaluation, to achieve in-depth physiological understanding and desirable therapeutic predictive capabilities.

Report of the Assay Guidance Workshop on 3-Dimensional Tissue Models for Antiviral Drug Development

The National Center for Advancing Translational Sciences (NCATS) Assay Guidance Manual (AGM) Workshop on 3D Tissue Models for Antiviral Drug Development, held virtually on 7-8 June 2022, provided comprehensive coverage of critical concepts intended to help scientists establish robust, reproducible, and scalable 3D tissue models to study viruses with pandemic potential. This workshop was organized by NCATS, the National Institute of Allergy and Infectious Diseases, and the Bill and Melinda Gates Foundation. During the workshop, scientific experts from academia, industry, and government provided an overview of 3D tissue models' utility and limitations, use of existing 3D tissue models for antiviral drug development, practical advice, best practices, and case studies about the application of available 3D tissue models to infectious disease modeling. This report includes a summary of each workshop session as well as a discussion of perspectives and challenges related to the use of 3D tissues in antiviral drug discovery.

Microfluidic-based skin-on-chip systems for safety assessment of nanomaterials

The skin is the body's largest organ, continuously exposed to and affected by natural and anthropogenic nanomaterials (materials with external and internal dimensions in the nanoscale range). This broad spectrum of insults gives rise to irreversible health effects (from skin corrosion to cancer). Organ-on-chip systems can recapitulate skin physiology with high fidelity and potentially revolutionize the safety assessment of nanomaterials. Here, we review current advances in skin-on-chip models and their potential to elucidate biological mechanisms. Further, strategies are discussed to recapitulate skin physiology on-chip, improving control over nanomaterials exposure and transport across cells. Finally, we highlight future opportunities and challenges from design and fabrication to acceptance by regulatory bodies and industry.

An in vitro autologous, vascularized, and immunocompetent Tissue Engineered Skin model obtained by the self-assembled approach

A complete in vitro skin model, containing resident cell types is needed to understand physiology and to consider the role of immune and endothelial cells in dermal drug testing. In this study, a cell extraction technique was developed to isolate resident skin cells from the same human donor while preserving the immune and endothelial cells. Then those cells were used to reconstruct an autologous, vascularized, and immunocompetent Tissue-Engineered Skin model, aviTES. Phenotypic characterization of the viable cells was performed on freshly isolated cells and after thawing through flow cytometry. Dermal cell extracts were characterized as fibroblasts, endothelial and immune cells, and the average amount of each cell type represents 4, 0.5, and 1 million viable cells per g of the dermis, respectively. The 3D models, TES and aviTES, were characterized by a fully differentiated epidermis that showed an increase in the presence of Ki67+ cells in the basolateral layer of the aviTES model. Capillary-like network formation, through the self-assembly of endothelial cells, and the presence of functional immune cells were identified through immunofluorescence staining in aviTES. In addition, the aviTES model was immunocompetent, as evidenced by its capacity to increase the production of pro-inflammatory cytokines TNF-α, MIP-1α, and GM-CSF following LPS stimulation. This study describes an autologous skin model containing a functional resident skin immune system and a capillary network. It provides a relevant tool to study the contribution of the immune system to skin diseases and inflammatory responses and to investigate resident skin cell interactions and drug development. STATEMENT OF SIGNIFICANCE: There is an urgent need for a complete in vitro skin model containing the resident cell types to better understand the role of immune and endothelial cells in skin and to be able to use it for drug testing. Actual 3D models of human skin most often contain only fibroblasts and keratinocytes with a limited number of models containing endothelial cells or a limited variety of immune cells. This study describes an autologous skin model containing a functional resident skin immune system and a capillary network. It provides a relevant tool to study the contribution of the immune system to skin diseases and inflammatory responses and to investigate interactions between resident skin cell, improving our capacity to develop new drugs.

Mouse Models for Human Herpesviruses

More than one hundred herpesviruses have been isolated from different species so far, with nine infecting humans. Infections with herpesviruses are characterized by life-long latency and represent a significant challenge for human health. To investigate the consequences of infections and identify novel treatment options, in vivo models are of particular relevance. The mouse has emerged as an economical small animal model to investigate herpesvirus infections. However, except for herpes simplex viruses (HSV-1, HSV-2), human herpesviruses cannot infect mice. Three natural herpesviruses have been identified in mice: mouse-derived cytomegalovirus (MCMV), mouse herpesvirus 68 (MHV-68), and mouse roseolovirus (MRV). These orthologues are broadly used to investigate herpesvirus infections within the natural host. In the last few decades, immunocompromised mouse models have been developed, allowing the functional engraftment of various human cells and tissues. These xenograft mice represent valuable model systems to investigate human-restricted viruses, making them particularly relevant for herpesvirus research. In this review, we describe the various mouse models used to study human herpesviruses, thereby highlighting their potential and limitations. Emphasis is laid on xenograft mouse models, covering the development and refinement of immune-compromised mice and their application in herpesvirus research.