Steering carbon dioxide reduction toward C-C coupling using copper electrodes modified with porous molecular films

Preserving Molecular Tuning for Enhanced Electrocatalytic CO2-to-Ethanol Conversion

Modifying catalyst surface with small molecular-additives presents a promising avenue for enhancing electrocatalytic performance. However, challenges arise in preserving the molecular-additives and maximizing their tuning effect, particularly at high current densities. Herein, we develop an effective strategy to preserve the molecular-additives on electrode surface by applying a thin protective layer. Taking 4-dimethylaminopyridine (DMAP) as an example of a molecular-additive, the hydrophobic protection layer on top of the DMAP-functionalized Cu-catalyst effectively prevents its leaching during CO2 electroreduction (CO2R). Consequently, the confined DMAP molecules substantially promote the CO2-to-multicarbon conversion at low overpotentials. For instance, at a potential as low as -0.47 V vs. reversible hydrogen electrode, the DMAP-functionalized Cu exhibits over 80 % selectivity towards multi-carbon products, while the pristine Cu shows only ~35 % selectivity for multi-carbon products. Notably, ethanol appears as the primary product on DMAP-functionalized Cu, with selectivity approaching 50 % at a high current density of 400 mA cm-2. Detailed kinetic analysis, in situ spectroscopies, and theoretical calculations indicate that DMAP-induced electron accumulations on surface Cu-sites decrease the reaction energy for C-C coupling. Additionally, the interactions between DMAP and oxygenated intermediates facilitate the ethanol formation pathway in CO2R. Overall, this study showcases an effective strategy to guide future endeavors involving molecular tuning effects.

Spectrometric monitoring of CO2 electrolysis on a molecularly modified copper surface

Since copper has been extensively studied due to its unique ability to reduce carbon dioxide to hydrocarbons and alcohols, it tends to yield a mixture of products. Among various efforts to improve the selectivity and efficiency of this catalysis, the introduction of organic molecules and polymers on the copper/electrolyte interface has proven to be an effective and promising way to improve surface activity, considering the variation and precise designability of organic structures. The role of surface molecular modifiers, however, is not as simple as that in homogeneous catalysts, and an understanding of a wide scale of interactions from the atomic scale to the whole electrode structure is required. This feature article classifies those different scale interactions caused by organic modifiers on copper catalysts, together with the experimental support by in situ vibrational spectroscopy which directly observes surface species and events. Based on these recent understandings, novel fabrication methods of organic structures on copper catalysts are also discussed.

Rational Designing Microenvironment of Gas-Diffusion Electrodes via Microgel-Augmented CO2 Availability for High-Rate and Selective CO2 Electroreduction to Ethylene

Efficient electrochemical CO2 reduction reaction (CO2RR) requires advanced gas-diffusion electrodes (GDEs) with tunned microenvironment to overcome low CO2 availability in the vicinity of catalyst layer. Herein, for the first time, pyridine-containing microgels-augmented CO2 availability is presented in Cu2O-based GDE for high-rate CO2 reduction to ethylene, owing to the presence of CO2-phil microgels with amine moieties. Microgels as three-dimensional polymer networks act as CO2 micro-reservoirs to engineer the GDE microenvironment and boost local CO2 availability. The superior ethylene production performance of the GDE modified by 4-vinyl pyridine microgels, as compared with the GDE with diethylaminoethyl methacrylate microgels, indicates the bifunctional effect of pyridine-based microgels to enhance CO2 availability, and electrocatalytic CO2 reduction. While the Faradaic efficiency (FE) of ethylene without microgels was capped at 43% at 300 mA cm-2, GDE with the pyridine microgels showed 56% FE of ethylene at 700 mA cm-2. A similar trend was observed in zero-gap design, and GDEs showed 58% FE of ethylene at -4.0 cell voltage (>350 mA cm-2 current density), resulting in over 2-fold improvement in ethylene production. This study showcases the use of CO2-phil microgels for a higher rate of CO2RR-to-C2+, opening an avenue for several other microgels for more selective and efficient CO2 electrolysis.

Leveraging experimental and computational tools for advancing carbon capture adsorbents research

CO2 emissions have been steadily increasing and have been a major contributor for climate change compelling nations to take decisive action fast. The average global temperature could reach 1.5 °C by 2035 which could cause a significant impact on the environment, if the emissions are left unchecked. Several strategies have been explored of which carbon capture is considered the most suitable for faster deployment. Among different carbon capture solutions, adsorption is considered both practical and sustainable for scale-up. But the development of adsorbents that can exhibit satisfactory performance is typically done through the experimental approach. This hit and trial method is costly and time consuming and often success is not guaranteed. Machine learning (ML) and other computational tools offer an alternate to this approach and is accessible to everyone. Often, the research towards materials focuses on maximizing its performance under simulated conditions. The aim of this study is to present a holistic view on progress in material research for carbon capture and the various tools available in this regard. Thus, in this review, we first present a context on the workflow for carbon capture material development before providing various machine learning and computational tools available to support researchers at each stage of the process. The most popular application of ML models is for predicting material performance and recommends that ML approaches can be utilized wherever possible so that experimentations can be focused on the later stages of the research and development.

Polyacrylate modified Cu electrode for selective electrochemical CO2 reduction towards multicarbon products

Highly selective production of value-added multicarbon (C2+) products via electrochemical CO2 reduction reaction (eCO2RR) on polycrystalline copper (Cu) remains challenging. Herein, the facile surface modification using poly (α-ethyl cyanoacrylate) (PECA) is presented to greatly enhance the C2+ selectivity for eCO2RR over polycrystalline Cu, with Faradaic efficiency (FE) towards C2+ products increased from 30.1% for the Cu electrode to 72.6% for the obtained Cu-PECA electrode at -1.1 V vs. reversible hydrogen electrode (RHE). Given the well-determined FEs towards C2+ products, the partial current densities for C2+ production could be estimated to be -145.4 mA cm-2 for the Cu-PECA electrode at -0.9 V vs. RHE in a homemade flow cell. In-situ spectral characterizations and theoretical calculations reveal that PECA featured with electron-accepting -C≡N and -COOR groups decorated onto the Cu electrode could inhibit the adsorption of *H intermediates and stabilize the *CO intermediates, given the redistributed interfacial electron density and the raised energy level of d-band center (Ed) of Cu active sites, thus facilitating the C-C coupling and then the C2+ selective production. This study is believed to be guidable to the modification of electrocatalysts and electrodes with polymers to steer the surface adsorption behaviors of reaction intermediates to realize practical eCO2RR towards value-added C2+ products with high activity and selectivity.

Highly Selective CO2 Electroreduction to Multi-Carbon Alcohols via Amine Modified Copper Nanoparticles at Acidic Conditions

Electroreduction of CO2 into multi-carbon (C2+) products (e.g. C2+ alcohols) offers a promising way for CO2 utilization. Use of strong alkaline electrolytes is favorable to producing C2+ products. However, CO2 can react with hydroxide to form carbonate/bicarbonate, which results in low carbon utilization efficiency and poor stability. Using acidic electrolyte is an efficient way to solve the problems, but it is a challenge to achieve high selectivity of C2+ products. Here we report that the amine modified copper nanoparticles exhibit high selectivity of C2+ products and carbon utilization at acidic condition. The Faradaic efficiency (FE) of C2+ products reach up to 81.8 % at acidic media (pH=2) with a total current density of 410 mA cm-2 over n-butylamine modified Cu. Especially the FE of C2+ alcohols is 52.6 %, which is higher than those reported for CO2 electroreduction at acidic condition. In addition, the single-pass carbon efficiency towards C2+ production reach up to 60 %. Detailed studies demonstrate that the amine molecule on the surface of Cu cannot only enhance the formation, adsorption and coverage of *CO, but also provide a hydrophobic environment, which result in the high selectivity of C2+ alcohols at acidic condition.

Role of Cu Oxide and Cu Adatoms in the Reactivity of CO2 on Cu(110)

We investigate the interaction of CO2 with metallic and oxidized Cu(110) surfaces using a combination of near-ambient pressure scanning tunneling microscopy (NAP-STM) and theoretical calculations. While the Cu(110) and full CuO films are inert, the interface between bare Cu(110) and the CuO film is observed to react instantly with CO2 at a 10 mbar pressure. The reaction is observed to proceed from the interfacial sites of CuO/Cu(110). During reaction with CO2, the CuO/Cu(110) interface releases Cu adatoms which combine with CO3 to produce a variety of added Cu-CO3 structures, whose stability depends on the gas pressure of CO2. A main implication for the reactivity of Cu(110) is that Cu adatoms and highly undercoordinated CuO segments are created on the Cu(110) surface through the interaction with CO2, which may act as reaction-induced active sites. In the case of CO2 hydrogenation to methanol, our theoretical assessment of such sites indicates that their presence may significantly promote CH3OH formation. Our study thus implies that the CuO/Cu(110) interfacial system is highly dynamic in the presence of CO2, and it suggests a possible strong importance of reaction-induced Cu and CuO sites for the surface chemistry of Cu(110) in CO2-related catalysis.

Toward Durable CO2 Electroreduction with Cu-Based Catalysts via Understanding Their Deactivation Modes

The technology of CO2 electrochemical reduction (CO2ER) provides a means to convert CO2, a waste greenhouse gas, into value-added chemicals. Copper is the most studied element that is capable of catalyzing CO2ER to obtain multicarbon products, such as ethylene, ethanol, acetate, etc., at an appreciable rate. Under the operating condition of CO2ER, the catalytic performance of Cu decays because of several factors that alters the surface properties of Cu. In this review, these factors that cause the degradation of Cu-based CO2ER catalysts are categorized into generalized deactivation modes, that are applicable to all electrocatalytic systems. The fundamental principles of each deactivation mode and the associated effects of each on Cu-based catalysts are discussed in detail. Structure- and composition-activity relationship developed from recent in situ/operando characterization studies are presented as evidence of related deactivation modes in operation. With the aim to address these deactivation modes, catalyst design and reaction environment engineering rationales are suggested. Finally, perspectives and remarks built upon the recent advances in CO2ER are provided in attempts to improve the durability of CO2ER catalysts.

Atomic Design of Copper Active Sites in Pristine Metal-Organic Coordination Compounds for Electrocatalytic Carbon Dioxide Reduction

Electrocatalytic carbon dioxide reduction reaction (CO2RR) has emerged as a promising and sustainable approach to cut carbon emissions by converting greenhouse gas CO2 to value-added chemicals and fuels. Metal-organic coordination compounds, especially the copper (Cu)-based coordination compounds, which feature well-defined crystalline structures and designable metal active sites, have attracted much research attention in electrocatalytic CO2RR. Herein, the recent advances of electrochemical CO2RR on pristine Cu-based coordination compounds with different types of Cu active sites are reviewed. First, the general reaction pathways of electrocatalytic CO2RR on Cu-based coordination compounds are briefly introduced. Then the highly efficient conversion of CO2 on various kinds of Cu active sites (e.g., single-Cu site, dimeric-Cu site, multi-Cu site, and heterometallic site) is systematically discussed, along with the corresponding catalytic reaction mechanisms. Finally, some existing challenges and potential opportunities for this research direction are provided to guide the rational design of metal-organic coordination compounds for their practical application in electrochemical CO2RR.

NHC-CDI Ligands Boost Multicarbon Production in Electrocatalytic CO2 Reduction by Increasing Accumulated Charged Intermediates and Promoting *CO Dimerization on Cu

Copper-based materials exhibit significant potential as catalysts for electrochemical CO2 reduction, owing to their capacity to generate multicarbon hydrocarbons. The molecular functionalization of Cu electrodes represents a simple yet powerful strategy for improving the intrinsic activity of these materials by favoring specific reaction pathways through the creation of tailored microenvironments around the surface active sites. However, despite its success, comprehensive mechanistic insights derived from experimental techniques are often limited, leaving the active role of surface modifiers inconclusive. In this work, we show that N-heterocyclic carbene-carbodiimide-functionalized Cu catalysts display a remarkable activity for multicarbon product formation, surpassing bare Cu electrodes by more than an order of magnitude. These hybrid catalysts operate efficiently using an electrolyzer equipped with a gas diffusion electrode, achieving a multicarbon product selectivity of 58% with a partial current density of ca. -80 mA cm-2. We found that the activity for multicarbon product formation is closely linked to the surface charge that accumulates during electrocatalysis, stemming from surface intermediate buildup. Through X-ray photoelectron spectroscopy, we elucidated the role of the molecular additives in altering the electronic structure of the Cu electrodes, promoting the stabilization of surface CO. Additionally, in situ Raman measurements established the identity of the reaction intermediates that accumulate during electrocatalysis, indicating preferential CO binding on Cu step sites, known for facilitating C-C coupling. This study underscores the significant potential of molecular surface modifications in developing efficient electrocatalysts for CO2 reduction, highlighting surface charge as a pivotal descriptor of multicarbon product activity.

Steering CO2 Electroreduction to C2+ Products via Enhancing Localized *CO Coverage and Local Pressure in Conical Cavity

The electrochemical carbon dioxide (CO2) reduction reaction (CO2RR) involves a multistep proton-coupled electron transfer (PCET) process that generates a variety of intermediates, making it challenging to transform them into target products with high activity and selectivity. Here, a catalyst featuring a nanosheet-stacked sphere structure with numerous open and deep conical cavities (OD-CCs) is reported. Under the guidance of the finite-element method (FEM) simulations and theoretical analysis, it is shown that exerting control over the confinement space results in diffusion limitation of the carbon intermediates, thereby increasing local pressure and subsequently enhancing localized *CO coverage for dimerization. The nanocavities exhibit a structure-driven shift in selectivity of multicarbon (C2+) product from 41.8% to 81.7% during the CO2RR process.

Theoretically Designed Cu10Sn3-Cu-SnOx as Three-Component Electrocatalyst for Efficient and Tunable CO2 Reduction to Syngas

Electrocatalytic transformation of CO2 to various syngas compositions is an exceedingly attractive approach to carbon-neutral recycling. Meanwhile, the achievement of selectivity, stability, and tunability of product ratios using single-component electrocatalysts is challenging. Herein, the theoretically-assisted design of the triple-component nanocomposite electrocatalyst Cu10Sn3-Cu-SnOx that addresses this challenge is presented. It is shown that Cu10Sn3 is a valuable electrocatalyst for suitable CO2 reduction to CO, SnO2 for CO2 reduction to formate at large overpotentials, and that the Cu-SnO2 interface facilitates H2 evolution. Accordingly, the interaction between the three functional components affords tunable CO/H2 ratios, from 1:2 to 2:1, of the produced syngas by controlling the applied potentials and relative contents of functional components. The syngas generation is selective (Faradaic efficiency, FE = 100%) at relatively lower cathodic potentials, whereas formate is the only liquid product detected at relatively higher cathodic potentials. The theoretically guided design approach therefore provides a new opportunity to boost the selectivity and stability of CO2 reduction to tunable syngas.

Accelerating the Reaction Kinetics of CO2 Reduction to Multi-Carbon Products by Synergistic Effect between Cation and Aprotic Solvent on Copper Electrodes

Improving the selectivity of electrochemical CO2 reduction to multi-carbon products (C2+ ) is an important and highly challenging topic. In this work, we propose and validate an effective strategy to improve C2+ selectivity on Cu electrodes, by introducing a synergistic effect between cation (Na+ ) and aprotic solvent (DMSO) to the electrolyte. Based on constant potential ab initio molecular dynamics simulations, we first revealed that Na+ facilitates C-C coupling while inhibits CH3 OH/CH4 products via reducing the water network connectivity near the electrode. Furthermore, the water network connectivity was further decreased by introducing an aprotic solvent DMSO, leading to suppression of both C1 production and hydrogen evolution reaction with minimal effect on *OCCO* hydrogenation. The synergistic effect enhancing C2 selectivity was also experimentally verified through electrochemical measurements. The results showed that the Faradaic efficiency of C2 increases from 9.3 % to 57 % at 50 mA/cm2 under a mixed electrolyte of NaHCO3 and DMSO compared to a pure NaHCO3 , which can significantly enhance the selectivity of the C2 product. Therefore, our discovery provides an effective electrolyte-based strategy for tuning CO2 RR selectivity through modulating the microenvironment at the electrode-electrolyte interface.

Tailoring the facet distribution on copper with chloride

Electrocatalytic reactions are sensitive to the catalyst surface structure. Therefore, finding methods to determine active surface sites with different geometry is essential to address the structure-electrocatalytic performance relationships. In this work, we propose a simple methodology to tune and quantify the surface structure on copper catalysts. We tailor the distribution and ratio of facets on copper by electrochemically oxidizing and reducing the surface in chloride-rich aqueous solutions. We then address the formation of new facets with voltammetric lead (Pb) underpotential deposition (UPD). We first record the voltammetric lead UPD on different single facets, which have intense peaks at different potential values. We use this data to decouple each facet peak-contribution in the lead (Pb) UPD curves of the tailored and multifaceted copper surfaces and determine the geometry of the active sites. We combine experiments with density functional theory (DFT) calculations to assess the ligand effect of chloride anions on the copper facet distribution during the surface oxidation/electrodeposition treatment. Our experiments and Wulff constructions suggest that chloride preferentially adsorbs on the (310) facet, reducing the number of (111) sites and inducing the growth of (310) or n(100) × (110) domains. Our work provides a tool to correlate active sites with copper geometries, which is needed to assess the structure-performance relationships in electrocatalysis. We also demonstrate an easy method for selectively tailoring the facet distribution of copper, which is essential to design a well-defined nanostructured catalyst.

Tuning Coordination Structures of Zn Sites Through Symmetry-Breaking Accelerates Electrocatalysis

Manipulating the coordination environment of individual active sites in a precise manner remains an important challenge in electrocatalytic reactions. Herein, inspired by theoretical predictions, a facile procedure to synthesize a series of symmetry-breaking zinc metal-organic framework (Zn-MOF) catalysts with well-defined structures is presented. Benefiting from the optimized coordination microenvironment regulated by symmetry-breaking, Zn-N2 S2 -MOF exhibits the best performance of nitrogen (N2 ) reduction reaction (NRR) with NH3 yield rate of 25.07 ± 1.57 µg h-1  cm-2 and Faradaic efficiency of 44.57 ± 2.79% compared with reported Zn-based NRR catalysts. X-ray absorption near-edge structure shows that the symmetry-breaking distorts the coordination environment and modulates the delocalized electrons around the Zn sites, which favors the formation of unpaired low-valence Znδ+ , thereby facilitating the adsorption/activation of N2 . Theoretical calculations elucidate that low-valence Znδ+ in Zn-N2 S2 -MOF can effectively lower the energy barrier of potential determining step, promoting the kinetics and boosting the NRR activity. This work highlights the relationship between the precise coordination environment of metal sites and the catalytic activity, which offers insightful guidance for rationally designing high-efficiency electrocatalysts.

Selective CO2 Reduction to Ethylene Mediated by Adaptive Small-molecule Engineering of Copper-based Electrocatalysts

Electrochemical CO2 reduction reaction (CO2 RR) over Cu catalysts exhibits enormous potential for efficiently converting CO2 to ethylene (C2 H4 ). However, achieving high C2 H4 selectivity remains a considerable challenge due to the propensity of Cu catalysts to undergo structural reconstruction during CO2 RR. Herein, we report an in situ molecule modification strategy that involves tannic acid (TA) molecules adaptive regulating the reconstruction of a Cu-based material to a pathway that facilitates CO2 reduction to C2 H4 products. An excellent Faraday efficiency (FE) of 63.6 % on C2 H4 with a current density of 497.2 mA cm-2 in flow cell was achieved, about 6.5 times higher than the pristine Cu catalyst which mainly produce CH4 . The in situ X-ray absorption spectroscopy and Raman studies reveal that the hydroxyl group in TA stabilizes Cuδ+ during the CO2 RR. Furthermore, theoretical calculations demonstrate that the Cuδ+ /Cu0 interfaces lower the activation energy barrier for *CO dimerization, and hydroxyl species stabilize the *COH intermediate via hydrogen bonding, thereby promoting C2 H4 production. Such molecule engineering modulated electronic structure provides a promising strategy to achieve highly selective CO2 reduction to value-added chemicals.

Mechanistic Implications of Low CO Coverage on Cu in the Electrochemical CO and CO2 Reduction Reactions

Electrochemical CO or CO2 reduction reactions (CO(2)RR), powered by renewable energy, represent one of the promising strategies for upgrading CO2 to valuable products. To design efficient and selective catalysts for the CO(2)RR, a comprehensive mechanistic understanding is necessary, including a comprehensive understanding of the reaction network and the identity of kinetically relevant steps. Surface-adsorbed CO (COad) is the most commonly reported reaction intermediate in the CO(2)RR, and its surface coverage (θCO) and binding energy are proposed to be key to the catalytic performance. Recent experimental evidence sugguests that θCO on Cu electrode at electrochemical conditions is quite low (∼0.05 monolayer), while relatively high θCO is often assumed in literature mechanistic discussion. This Perspective briefly summarizes existing efforts in determining θCO on Cu surfaces, analyzes mechanistic impacts of low θCO on the reaction pathway and catalytic performance, and discusses potential fruitful future directions in advancing our understanding of the Cu-catalyzed CO(2)RR.

Oxophilicity-Controlled CO2 Electroreduction to C2+ Alcohols over Lewis Acid Metal-Doped Cuδ+ Catalysts

Cu-based electrocatalysts have great potential for facilitating CO2 reduction to produce energy-intensive fuels and chemicals. However, it remains challenging to obtain high product selectivity due to the inevitable strong competition among various pathways. Here, we propose a strategy to regulate the adsorption of oxygen-associated active species on Cu by introducing an oxophilic metal, which can effectively improve the selectivity of C2+ alcohols. Theoretical calculations manifested that doping of Lewis acid metal Al into Cu can affect the C-O bond and Cu-C bond breaking toward the selectively determining intermediate (shared by ethanol and ethylene), thus prioritizing the ethanol pathway. Experimentally, the Al-doped Cu catalyst exhibited an outstanding C2+ Faradaic efficiency (FE) of 84.5% with remarkable stability. In particular, the C2+ alcohol FE could reach 55.2% with a partial current density of 354.2 mA cm-2 and a formation rate of 1066.8 μmol cm-2 h-1. A detailed experimental study revealed that Al doping improved the adsorption strength of active oxygen species on the Cu surface and stabilized the key intermediate *OC2H5, leading to high selectivity toward ethanol. Further investigation showed that this strategy could also be extended to other Lewis acid metals.

Organic-moiety-engineering on copper surface for carbon dioxide reduction

Electrochemical conversion of carbon dioxide (CO₂) into value-added products powered by sustainable electricity is considered as one of the most promising strategies for carbon neutrality. Among the products, hydrocarbons, especially ethylene and ethanol are the most desired species due to their wide industrial applications. Copper-based catalysts are currently the very limited option available for catalyzing the reduction of CO₂ to multi-carbon products. How to enhance the selectivity and current density is the focus in both academia and industry. In recent years, some organic molecules, oligomers and polymers with well-defined structures have been applied and demonstrated to be effective on enhancing electrocatalytic activity of copper catalysts. However, the molecular/copper interaction and CO₂ molecules' behavior at the hetero-interface remain unclear. In this review, we classify the different organic materials which have been applied in the field of electrochemical CO₂ reduction. We focus on the regulation of local microenvironment on the copper surface by organic compounds, including surface hydrophobicity, local electric field, local pH, and coverage of intermediates etc. The relationship between local microenvironment and catalytic activity is specifically discussed. This review could provide guidance for the development of more organic/inorganic hybrid catalysts for further promoting CO₂ reduction reaction.