Capacitive interdigitated system of high osteoinductive/conductive performance for personalized acting-sensing implants

Self-adaptive rotational electromagnetic energy generation as an alternative to triboelectric and piezoelectric transductions

Triboelectric and piezoelectric energy harvesters can hardly power most microelectronic systems. Rotational electromagnetic harvesters are very promising alternatives, but their performance is highly dependent on the varying mechanical sources. This study presents an innovative approach to significantly increase the performance of rotational harvesters, based on dynamic coil switching strategies for optimization of the coil connection architecture during energy generation. Both analytical and experimental validations of the concept of self-adaptive rotational harvester were carried out. The adaptive harvester was able to provide an average power increase of 63.3% and 79.5% when compared to a non-adaptive 16-coil harvester for harmonic translation and harmonic swaying excitations, respectively, and 83.5% and 87.2% when compared to a non-adaptive 8-coil harvester. The estimated energy conversion efficiency was also enhanced from ~80% to 90%. This study unravels an emerging technological approach to power a wide range of applications that cannot be powered by other vibrationally driven harvesters.

The application of impantable sensors in the musculoskeletal system: a review

As the population ages and the incidence of traumatic events rises, there is a growing trend toward the implantation of devices to replace damaged or degenerated tissues in the body. In orthopedic applications, some implants are equipped with sensors to measure internal data and monitor the status of the implant. In recent years, several multi-functional implants have been developed that the clinician can externally control using a smart device. Experts anticipate that these versatile implants could pave the way for the next-generation of technological advancements. This paper provides an introduction to implantable sensors and is structured into three parts. The first section categorizes existing implantable sensors based on their working principles and provides detailed illustrations with examples. The second section introduces the most common materials used in implantable sensors, divided into rigid and flexible materials according to their properties. The third section is the focal point of this article, with implantable orthopedic sensors being classified as joint, spine, or fracture, based on different practical scenarios. The aim of this review is to introduce various implantable orthopedic sensors, compare their different characteristics, and outline the future direction of their development and application.

Bioinspired Piezoelectric Periosteum to Augment Bone Regeneration via Synergistic Immunomodulation and Osteogenesis

Ideal periosteum materials are required to participate in a sequence of bone repair-related physiological events, including the initial immune response, endogenous stem cell recruitment, angiogenesis, and osteogenesis. However, conventional tissue-engineered periosteal materials have difficulty achieving these functions by simply mimicking the periosteum via structural design or by loading exogenous stem cells, cytokines, or growth factors. Herein, we present a novel biomimetic periosteum preparation strategy to comprehensively enhance the bone regeneration effect using functionalized piezoelectric materials. The resulting biomimetic periosteum possessing an excellent piezoelectric effect and improved physicochemical properties was prepared using a biocompatible and biodegradable poly(3-hydroxybutyric acid-co-3-hydrovaleric acid) (PHBV) polymer matrix, antioxidized polydopamine-modified hydroxyapatite (PHA), and barium titanate (PBT), which were further incorporated into the polymer matrix to fabricate a multifunctional piezoelectric periosteum by a simple one-step spin-coating method. The addition of PHA and PBT dramatically enhanced the physicochemical properties and biological functions of the piezoelectric periosteum, resulting in improved surface hydrophilicity and roughness, enhanced mechanical performance, tunable degradation behavior, and stable and desired endogenous electrical stimulations, which is conducive to accelerating bone regeneration. Benefiting from endogenous piezoelectric stimulation and bioactive components, the as-fabricated biomimetic periosteum demonstrated favorable biocompatibility, osteogenic activity, and immunomodulatory functions in vitro, which not only promoted adhesion, proliferation, and spreading as well as osteogenesis of mesenchymal stem cells (MSCs) but also effectively induced M2 macrophage polarization, thereby suppressing reactive oxygen species (ROS)-induced inflammatory reactions. Through in vivo experiments, the biomimetic periosteum with endogenous piezoelectric stimulation synergistically accelerated the formation of new bone in a rat critical-sized cranial defect model. The whole defect was almost completely covered by new bone at 8 weeks post treatment, with a thickness close to that of the host bone. Collectively, with its favorable immunomodulatory and osteogenic properties, the biomimetic periosteum developed here represents a novel method to rapidly regenerate bone tissue using piezoelectric stimulation.

Capacitive stimulation-sensing system for instrumented bone implants: Finite element model to predict the electric stimuli delivered to the interface

BACKGROUND

Prevalence of orthopaedic replacements are increasing around the world. The main cause of revision remains associated to the interface loosening. In this work, a computational study using the Finite element method was developed to predict the electric field stimuli delivered to trabecular bone structures, as well as to predict the sensing ability to detect different bone-implant interface scenarios.

METHODS

Three finite element models were developed: two simplified models, including a Gyroid TMP structure, and a realistic model based on microCT scan of a trabecular bone from sheep vertebra. Simulations were performed using a co-surface capacitive technology for stimulating and sensing bone-implant interfaces. Different fixation scenarios were considered, namely by establishing bone-stimulator gap sizes up to 1 mm (from fixation to massive loosening scenario). Electrodes were excited with sinusoidal and square electric signals up to 10V voltage and 64kHz frequency.

RESULTS

Simplification of bone geometry resulted in significant electric stimuli differences compared to the realistic bone geometry. Realistic modelling allowed to observe that, in the fixation scenario, the electric field stimuli decreased 85% from the sensor interface to a parallel plane 2 mm apart from such interface. A significant influence of the bone-stimulator distance on the electric stimuli was found: the electric stimuli magnitudes varied in the range between 0.38 V/mm (fixation scenario) and 4.8 mV/mm (massive loosening scenario) for voltages up to 10V. Strong frequency-dependent behaviours were also observed in the electric stimuli: their magnitudes can reach 106-fold decreases when the excitation frequency is decreased from 32 kHz to 14 Hz CONCLUSION: This study points out the inability of our two simplified models to predict the electric stimulation provided to different bone-implant interface scenarios. Results highlight that co-surface stimulators can deliver osteogenic electric stimuli along trabecular bone structures, ensuring low electric power excitations. Moreover, realistic models strongly enhance the sensing predictability of the bone-implant fixation states. These new and significant evidences provide a strong support to integrate co-surface capacitive into bioelectronic implants for both therapeutic and sensing operations.

Ultrasensitive capacitive sensing system for smart medical devices with ability to monitor fracture healing stages

Bone fractures are a global public health problem. A sustained increase in the number of incident cases has been observed in the last few decades, as well as the number of prevalent cases and the number of years lived with disability. Current monitoring techniques are based on imaging techniques, which are highly subjective, radioactive, expensive and unable to provide daily monitoring of fracture healing stages. The development of reliable, non-invasive and non-subjective technologies is mandatory to minimize non-union risks. Delayed healing and non-union conditions require timely medical intervention, such that preventive procedures and shortened treatment periods can be carried out. This work proposes the development of an ultrasensitive capacitive sensing system for smart implantable fixation implants with ability to effectively monitor the evolution of bone fractures. Both in vitro experimental tests and numerical simulations highlight that networks of co-surface capacitive systems are able: (i) to detect four different bone healing phases, capacitance decrease patterns occurring as the healing process progresses and (ii) to monitor the callus evolution in multiple target regions. These are very promising results that highlight the potential of capacitive technologies to minimize the individual and social burdens related to fracture management, mainly when delayed healing or non-union conditions occur.

Bioreactor analyses of tissue ingrowth, ongrowth and remodelling around implants: An alternative to live animal testing

Introduction: Preclinical assessment of bone remodelling onto, into or around novel implant technologies is underpinned by a large live animal testing burden. The aim of this study was to explore whether a lab-based bioreactor model could provide similar insight. Method: Twelve ex vivo trabecular bone cylinders were extracted from porcine femora and were implanted with additively manufactured stochastic porous titanium implants. Half were cultured dynamically, in a bioreactor with continuous fluid flow and daily cyclic loading, and half in static well plates. Tissue ongrowth, ingrowth and remodelling around the implants were evaluated with imaging and mechanical testing. Results: For both culture conditions, scanning electron microscopy (SEM) revealed bone ongrowth; widefield, backscatter SEM, micro computed tomography scanning, and histology revealed mineralisation inside the implant pores; and histology revealed woven bone formation and bone resorption around the implant. The imaging evidence of this tissue ongrowth, ingrowth and remodelling around the implant was greater for the dynamically cultured samples, and the mechanical testing revealed that the dynamically cultured samples had approximately three times greater push-through fixation strength (p < 0.05). Discussion: Ex vivo bone models enable the analysis of tissue remodelling onto, into and around porous implants in the lab. While static culture conditions exhibited some characteristics of bony adaptation to implantation, simulating physiological conditions with a bioreactor led to an accelerated response.

Long-term stimulation with alternating electric fields modulates the differentiation and mineralization of human pre-osteoblasts

Biophysical stimulation by electric fields can promote bone formation in bone defects of critical size. Even though, long-term effects of alternating electric fields on the differentiation of osteoblasts are not fully understood. Human pre-osteoblasts were stimulated over 31 days to gain more information about these cellular processes. An alternating electric field with 0.7 V_rms and 20 Hz at two distances was applied and viability, mineralization, gene expression, and protein release of differentiation factors were analyzed. The viability was enhanced during the first days of stimulation. A higher electric field resulted in upregulation of typical osteogenic markers like osteoprotegerin, osteopontin, and interleukin-6, but no significant changes in mineralization. Upregulation of the osteogenic markers could be detected with a lower electric field after the first days of stimulation. As a significant increase in the mineralized matrix was identified, an enhanced osteogenesis due to low alternating electric fields can be assumed.

Bioelectronic multifunctional bone implants: recent trends

The concept of Instrumented Smart Implant emerged as a leading research topic that aims to revolutionize the field of orthopaedic implantology. These implants have been designed incorporating biophysical therapeutic actuation, bone-implant interface sensing, implant-clinician communication and self-powering ability. The ultimate goal is to implement revist interface, controlled by clinicians/surgeons without troubling the quotidian activities of patients. Developing such high-performance technologies is of utmost importance, as bone replacements are among the most performed surgeries worldwide and implant failure rates can still exceed 10%. In this review paper, an overview to the major breakthroughs carried out in the scope of multifunctional smart bone implants is provided. One can conclude that many challenges must be overcome to successfully develop them as revision-free implants, but their many strengths highlight a huge potential to effectively establish a new generation of high-sophisticated biodevices.

Multifunctional Smart Bone Implants: Fiction or Future?-A New Perspective

Implantable medical devices have been developed to provide multifunctional ability to numerous bioapplications. In the scope of orthopaedics, four methodologies were already proposed to design implant technologies: non-instrumented passive implants, non-instrumented active implants, instrumented passive implants and instrumented active implants. Even though bone replacements are among the most performed surgeries worldwide, implant failure rates can still exceed 10%. Controversial positions multiply in the scientific community about the potential of each methodology to minimize the burden related to implant failures. In this perspective paper, we argue that the next technological revolution in the field of implantable bone devices will most likely emerge with instrumented active implants as multifunctional smart devices extracorporeally controlled by clinicians/surgeons. Moreover, we provide a new perspective about implant technology: the essence of instrumented implants is to enclose a hybrid architecture in which optimal implant performances require both smart instrumentation and smart coatings, although the implant controllability must be ensured by extracorporeal systems.

Bioengineered Hierarchical Bonelike Compartmentalized Microconstructs Using Nanogrooved Microdiscs

Fabrication of vascularized large-scale constructs for regenerative medicine remains elusive since most strategies rely solely on cell self-organization or overly control cell positioning, failing to address nutrient diffusion limitations. We propose a modular and hierarchical tissue-engineering strategy to produce bonelike tissues carrying signals to promote prevascularization. In these 3D systems, disc-shaped microcarriers featuring nanogrooved topographical cues guide cell behavior by harnessing mechanotransduction mechanisms. A sequential seeding strategy of adipose-derived stromal cells and endothelial cells is implemented within compartmentalized, liquefied-core macrocapsules in a self-organizing and dynamic system. Importantly, our system autonomously promotes osteogenesis and construct's mineralization while promoting a favorable environment for prevascular-like endothelial organization. Given its modular and self-organizing nature, our strategy may be applied for the fabrication of larger constructs with a highly controlled starting point to be used for local regeneration upon implantation or as drug-screening platforms.

Multiscale Sensing of Bone-Implant Loosening for Multifunctional Smart Bone Implants: Using Capacitive Technologies for Precision Controllability

The world population growth and average life expectancy rise have increased the number of people suffering from non-communicable diseases, namely osteoarthritis, a disorder that causes a significant increase in the years lived with disability. Many people who suffer from osteoarthritis undergo replacement surgery. Despite the relatively high success rate, around 10% of patients require revision surgeries, mostly because existing implant technologies lack sensing devices capable of monitoring the bone–implant interface. Among the several monitoring methodologies already proposed as substitutes for traditional imaging methods, cosurface capacitive sensing systems hold the potential to monitor the bone–implant fixation states, a mandatory capability for long-term implant survival. A multifaceted study is offered here, which covers research on the following points: (1) the ability of a cosurface capacitor network to effectively monitor bone loosening in extended peri-implant regions and according to different stimulation frequencies; (2) the ability of these capacitive architectures to provide effective sensing in interfaces with hydroxyapatite-based layers; (3) the ability to control the operation of cosurface capacitive networks using extracorporeal informatic systems. In vitro tests were performed using a web-based network sensor composed of striped and interdigitated capacitive sensors. Hydroxyapatite-based layers have a minor effect on determining the fixation states; the effective operation of a sensor network-based solution communicating through a web server hosted on Raspberry Pi was shown. Previous studies highlight the inability of current bone–implant fixation monitoring methods to significantly reduce the number of revision surgeries, as well as promising results of capacitive sensing systems to monitor micro-scale and macro-scale bone–interface states. In this study, we found that extracorporeal informatic systems enable continuous patient monitoring using cosurface capacitive networks with or without hydroxyapatite-based layers. Findings presented here represent significant advancements toward the design of future multifunctional smart implants.

Current Development in Interdigital Transducer (IDT) Surface Acoustic Wave Devices for Live Cell In Vitro Studies: A Review

Acoustics have a wide range of uses, from noise-cancelling to ultrasonic imaging. There has been a surge in interest in developing acoustic-based approaches for biological and biomedical applications in the last decade. This review focused on the application of surface acoustic waves (SAW) based on interdigital transducers (IDT) for live-cell investigations, such as cell manipulation, cell separation, cell seeding, cell migration, cell characteristics, and cell behaviours. The approach is also known as acoustofluidic, because the SAW device is coupled with a microfluidic system that contains live cells. This article provides an overview of several forms of IDT of SAW devices on recently used cells. Conclusively, a brief viewpoint and overview of the future application of SAW techniques in live-cell investigations were presented.