Engineering the entropy-driven free-energy landscape of a dynamic nanoporous protein assembly

Engineering Anisotropy into Organized Nanoscale Matter

Programming the organization of discrete building blocks into periodic and quasi-periodic arrays is challenging. Methods for organizing materials are particularly important at the nanoscale, where the time required for organization processes is practically manageable in experiments, and the resulting structures are of interest for applications spanning catalysis, optics, and plasmonics. While the assembly of isotropic nanoscale objects has been extensively studied and described by empirical design rules, recent synthetic advances have allowed anisotropy to be programmed into macroscopic assemblies made from nanoscale building blocks, opening new opportunities to engineer periodic materials and even quasicrystals with unnatural properties. In this review, we define guidelines for leveraging anisotropy of individual building blocks to direct the organization of nanoscale matter. First, the nature and spatial distribution of local interactions are considered and three design rules that guide particle organization are derived. Subsequently, recent examples from the literature are examined in the context of these design rules. Within the discussion of each rule, we delineate the examples according to the dimensionality (0D-3D) of the building blocks. Finally, we use geometric considerations to propose a general inverse design-based construction strategy that will enable the engineering of colloidal crystals with unprecedented structural control.

Fluorescence of Aggregated Aromatic Peptides for Studying the Kinetics of Aggregation and Hardening of Amyloid-like Structures

The capability of amyloid-like peptide fibers to emit intrinsic-fluorescence enables the study of their formation, stability and hardening through time-resolved fluorescence analysis, without the need for additional intercalating dyes. This approach allows the monitoring of amyloid-like peptides aggregation kinetics using minimal sample volumes, and the simultaneous testing of numerous experimental conditions and analytes, offering rapid and reproducible results. The analytical procedure applied to the aromatic hexapeptide F6, alone or derivatized with PEG (polyethylene glycol) moiety of different lengths, suggests that aggregation into large anisotropic structures negatively correlates with initial monomer concentration and relies on the presence of charged N- and C-termini. PEGylation reduces the extent of aggregates hardening, possibly by retaining water, and overall impacts the final structural properties of the aggregates.

Designed 2D protein crystals as dynamic molecular gatekeepers for a solid-state device

The sensitivity and responsiveness of living cells to environmental changes are enabled by dynamic protein structures, inspiring efforts to construct artificial supramolecular protein assemblies. However, despite their sophisticated structures, designed protein assemblies have yet to be incorporated into macroscale devices for real-life applications. We report a 2D crystalline protein assembly of C98/E57/E66L-rhamnulose-1-phosphate aldolase (CEERhuA) that selectively blocks or passes molecular species when exposed to a chemical trigger. CEERhuA crystals are engineered via cobalt(II) coordination bonds to undergo a coherent conformational change from a closed state (pore dimensions <1 nm) to an ajar state (pore dimensions ~4 nm) when exposed to an HCN(g) trigger. When layered onto a mesoporous silicon (pSi) photonic crystal optical sensor configured to detect HCN(g), the 2D CEERhuA crystal layer effectively blocks interferents that would otherwise result in a false positive signal. The 2D CEERhuA crystal layer opens in selective response to low-ppm levels of HCN(g), allowing analyte penetration into the pSi sensor layer for detection. These findings illustrate that designed protein assemblies can function as dynamic components of solid-state devices in non-aqueous environments.

Heme-substituted protein assembly bridged by synthetic porphyrin: achieving controlled configuration while maintaining rotational freedom

The use of biological host-guest interactions, specifically the binding of hemoprotein to heme, has attracted significant research interest in the design of artificial protein assemblies. However, because of the inherent flexibility of the propionic acid group of heme, it is difficult to control the positioning and orientation of the protein unit and to construct well-ordered structures. Herein, we report a heme-substituted protein dimer composed of the native hemoprotein HasA, which accommodates a tetraphenylporphyrin bearing an additional metal coordination site. The specific binding of the tetraphenylporphyrin with an additional metal coordination site that protrudes in a fixed direction confines the configuration of the dimer structure to a defined bent form. The small-angle X-ray scattering profile shows the dimer structure with a bent form and suggests dynamic rotational behavior while keeping its bent-core structure, resembling a bevel gear. This unique dimer structure demonstrates that the design of heme-substituted protein assemblies can be expanded to protein assemblies while maintaining the rotational freedom of the individual protein units.

Spatially Patterned, Porous Protein Crystals as Multifunctional Materials

While the primary use of protein crystals has historically been in crystallographic structure determination, they have recently emerged as promising materials with many advantageous properties such as high porosity, biocompatibility, stability, structural and functional versatility, and genetic/chemical tailorability. Here, we report that the utility of protein crystals as functional materials can be further augmented through their spatial patterning and control of their morphologies. To this end, we took advantage of the chemically and kinetically controllable nature of ferritin self-assembly and constructed core-shell crystals with chemically distinct domains, tunable structural patterns, and morphologies. The spatial organization within ferritin crystals enabled the generation of patterned, multi-enzyme frameworks with cooperative catalytic behavior. We further exploited the differential growth kinetics of ferritin crystal facets to assemble Janus-type architectures with an anisotropic arrangement of chemically distinct domains. These examples represent a step toward using protein crystals as reaction vessels for complex multi-step reactions and broadening their utility as functional, solid-state materials. Our results demonstrate that morphology control and spatial patterning, which are key concepts in materials science and nanotechnology, can also be applied for engineering protein crystals.

Design of supramolecular nanosheets for drug delivery applications

Two specific concepts have emerged in the field of materials science over the last several decades: nanosheets and supramolecular polymers. More recently, supramolecular nanosheets, in which these two concepts are integrated, have attracted particular attention, and they exhibit many fascinating characteristics. This review focuses on the design and applications of supramolecular nanosheets consisting of tubulin proteins and phospholipid membranes.

A cavity formation energy formula for hard spheres in simple electrolyte solutions

A formula for cavity formation energy of a hard sphere in restricted primitive electrolyte solutions is derived based on the integral equation theory. Specifically, the contact values of radial distribution functions between the hard sphere and the ionic species, determined analytically from the first-order mean spherical approximation theory, are used to evaluate the cavity formation energy. In the large solute-size limit, the scaling relation of the cavity formation energy further leads to an analytical expression for the surface tension of the electrolyte solution near a curved interface. Our theory is applied to hard spheres immersed in restricted primitive electrolyte solutions, where the good agreement of the cavity formation energy with the hyper-netted chain theory demonstrates the accuracy of our theory.

Kaleidoscope megamolecules synthesis and application using self-assembly technology

The megamolecules with high ordered structures play an important role in chemical biology and biomedical engineering. Self-assembly, a long-discovered but very appealing technique, could induce many reactions between biomacromolecules and organic linking molecules, such as an enzyme domain and its covalent inhibitors. Enzyme and its small-molecule inhibitors have achieved many successes in medical application, which realize the catalysis process and theranostic function. By employing the protein engineering technology, the building blocks of enzyme fusion protein and small molecule linker can be assembled into a novel architecture with the specified organization and conformation. Molecular level recognition of enzyme domain could provide both covalent reaction sites and structural skeleton for the functional fusion protein. In this review, we will discuss the range of tools available to combine functional domains by using the recombinant protein technology, which can assemble them into precisely specified architectures/valences and develop the kaleidoscope megamolecules for catalytic and medical application.

Lipidation Alters the Structure and Hydration of Myristoylated Intrinsically Disordered Proteins

Lipidated proteins are an emerging class of hybrid biomaterials that can integrate the functional capabilities of proteins into precisely engineered nano-biomaterials with potential applications in biotechnology, nanoscience, and biomedical engineering. For instance, fatty-acid-modified elastin-like polypeptides (FAMEs) combine the hierarchical assembly of lipids with the thermoresponsive character of elastin-like polypeptides (ELPs) to form nanocarriers with emergent temperature-dependent structural (shape or size) characteristics. Here, we report the biophysical underpinnings of thermoresponsive behavior of FAMEs using computational nanoscopy, spectroscopy, scattering, and microscopy. This integrated approach revealed that temperature and molecular syntax alter the structure, contact, and hydration of lipid, lipidation site, and protein, aligning with the changes in the nanomorphology of FAMEs. These findings enable a better understanding of the biophysical consequence of lipidation in biology and the rational design of the biomaterials and therapeutics that rival the exquisite hierarchy and capabilities of biological systems.

Evolution of Protein Assemblies Driven by the Switching of Interplay Mode

A protein assembly with the ability to switch interplay modes of multiple driving forces has been achieved. Although biomolecular systems driven by multiple driving forces have been exploited, work on such a protein assembly capable of switching the interplay modes at nanoscale has been rarely reported so far as a result of their great fabrication challenge. In this work, two sets of driving forces such as ligand-ligand interaction and protein-protein interaction were leveraged to antagonistically underpin the multilayered stackings and trigger the hollow evolution to afford the well-defined hollow rectangular frame of proteins. While these protein frames further collapsed into aggregates, the ligand-ligand interactions were weakened, and the interplay of two sets of driving forces thereby tended to switch into synergistic mode, converting the protein packing mode from porously loose packing to axially dense packing and thus giving rise to a morphological evolution toward a nanosized protein tube. This strategy not only provides a nanoscale understanding on the mechanism underlying the switch of interplay modes in the context of biomacromolecules but also may provide access for diverse sophisticated biomacromolecular nanostructures that are historically inaccessible for conventional self-assembly strategies.

Protein Assembly by Design

Proteins are nature's primary building blocks for the construction of sophisticated molecular machines and dynamic materials, ranging from protein complexes such as photosystem II and nitrogenase that drive biogeochemical cycles to cytoskeletal assemblies and muscle fibers for motion. Such natural systems have inspired extensive efforts in the rational design of artificial protein assemblies in the last two decades. As molecular building blocks, proteins are highly complex, in terms of both their three-dimensional structures and chemical compositions. To enable control over the self-assembly of such complex molecules, scientists have devised many creative strategies by combining tools and principles of experimental and computational biophysics, supramolecular chemistry, inorganic chemistry, materials science, and polymer chemistry, among others. Owing to these innovative strategies, what started as a purely structure-building exercise two decades ago has, in short order, led to artificial protein assemblies with unprecedented structures and functions and protein-based materials with unusual properties. Our goal in this review is to give an overview of this exciting and highly interdisciplinary area of research, first outlining the design strategies and tools that have been devised for controlling protein self-assembly, then describing the diverse structures of artificial protein assemblies, and finally highlighting the emergent properties and functions of these assemblies.

Probing the conjugation of epigallocatechin gallate with β-lactoglobulin and its in vivo desensitization efficiency

Epigallocatechin gallate (EGCG) and β-lactoglobulin (βLg) were conjugated by covalent bonds to form EGCG-βLg conjugates. This conjugation causes structural and bioactivity changes in βLg, which in turn can be used as a possible approach for desensitization to allergens. In this study, the desensitization mechanism was investigated by monitoring βLg secondary structure and immunoglobulin E (IgE) combining capacity changes on the basis of the conjugation mechanism. Furthermore, the desensitization efficiency in vivo was evaluated through animal experiments. The results show that temperature influenced the conjugation by decreasing the binding affinities (K_a) and binding numbers (n) of EGCG. The conjugation of EGCG decreased βLg's IgE combining capacity by decreasing the β-sheet component and imparted antioxidant properties by the introduction of hydroxyl groups. In addition, animal experiment results indicated that βLg induced significant changes in the levels of IgE and inflammatory cytokines, and the relative abundance of small intestinal flora, linked to the inflammatory lesions and anaphylaxis symptoms. EGCG-βLg conjugates can suppress the allergic response, attenuating serum IgE and relieving the anaphylaxis symptoms.

Design of metal-mediated protein assemblies via hydroxamic acid functionalities

The self-assembly of proteins into sophisticated multicomponent assemblies is a hallmark of all living systems and has spawned extensive efforts in the construction of novel synthetic protein architectures with emergent functional properties. Protein assemblies in nature are formed via selective association of multiple protein surfaces through intricate noncovalent protein-protein interactions, a challenging task to accurately replicate in the de novo design of multiprotein systems. In this protocol, we describe the application of metal-coordinating hydroxamate (HA) motifs to direct the metal-mediated assembly of polyhedral protein architectures and 3D crystalline protein-metal-organic frameworks (protein-MOFs). This strategy has been implemented using an asymmetric cytochrome cb₅₆₂ monomer through selective, concurrent association of Fe³⁺ and Zn²⁺ ions to form polyhedral cages. Furthermore, the use of ditopic HA linkers as bridging ligands with metal-binding protein nodes has allowed the construction of crystalline 3D protein-MOF lattices. The protocol is divided into two major sections: (1) the development of a Cys-reactive HA molecule for protein derivatization and self-assembly of protein-HA conjugates into polyhedral cages and (2) the synthesis of ditopic HA bridging ligands for the construction of ferritin-based protein-MOFs using symmetric metal-binding protein nodes. Protein cages are analyzed using analytical ultracentrifugation, transmission electron microscopy and single-crystal X-ray diffraction techniques. HA-mediated protein-MOFs are formed in sitting-drop vapor diffusion crystallization trays and are probed via single-crystal X-ray diffraction and multi-crystal small-angle X-ray scattering measurements. Ligand synthesis, construction of HA-mediated assemblies, and post-assembly analysis as described in this protocol can be performed by a graduate-level researcher within 6 weeks.

Ion-dependent protein-surface interactions from intrinsic solvent response

The phyllosilicate mineral muscovite mica is widely used as a surface template for the patterning of macromolecules, yet a molecular understanding of its surface chemistry under varying solution conditions, required to predict and control the self-assembly of adsorbed species, is lacking. We utilize all-atom molecular dynamics simulations in conjunction with an electrostatic analysis based in local molecular field theory that affords a clean separation of long-range and short-range electrostatics. Using water polarization response as a measure of the electric fields that arise from patterned, surface-bound ions that direct the adsorption of charged macromolecules, we apply a Landau theory of forces induced by asymmetrically polarized surfaces to compute protein-surface interactions for two muscovite-binding proteins (DHR10-mica6 and ^C98RhuA). Comparison of the pressure between surface and protein in high-concentration KCl and NaCl aqueous solutions reveals ion-specific differences in far-field protein-surface interactions, neatly capturing the ability of ions to modulate the surface charge of muscovite that in turn selectively attracts one binding face of each protein over all others.

Nucleation of protein mesocrystals via oriented attachment

Self-assembly of proteins holds great promise for the bottom-up design and production of synthetic biomaterials. In conventional approaches, designer proteins are pre-programmed with specific recognition sites that drive the association process towards a desired organized state. Although proven effective, this approach poses restrictions on the complexity and material properties of the end-state. An alternative, hierarchical approach that has found wide adoption for inorganic systems, relies on the production of crystalline nanoparticles that become the building blocks of a next-level assembly process driven by oriented attachment (OA). As it stands, OA has not yet been observed for protein systems. Here we employ cryo-transmission electron microscopy (cryoEM) in the high nucleation rate limit of protein crystals and map the self-assembly route at molecular resolution. We observe the initial formation of facetted nanocrystals that merge lattices by means of OA alignment well before contact is made, satisfying non-trivial symmetry rules in the process. As these nanocrystalline assemblies grow larger we witness imperfect docking events leading to oriented aggregation into mesocrystalline assemblies. These observations highlight the underappreciated role of the interaction between crystalline nuclei, and the impact of OA on the crystallization process of proteins.

Synthesis, Characterization, and Simulation of Four-Armed Megamolecules

This paper describes the synthesis, characterization, and modeling of a series of molecules having four protein domains attached to a central core. The molecules were assembled with the "megamolecule" strategy, wherein enzymes react with their covalent inhibitors that are substituted on a linker. Three linkers were synthesized, where each had four oligo(ethylene glycol)-based arms terminated in a para-nitrophenyl phosphonate group that is a covalent inhibitor for cutinase. This enzyme is a serine hydrolase and reacts efficiently with the phosphonate to give a new ester linkage at the Ser-120 residue in the active site of the enzyme. Negative-stain transmission electron microscopy (TEM) images confirmed the architecture of the four-armed megamolecules. These cutinase tetramers were also characterized by X-ray crystallography, which confirmed the active-site serine-phosphonate linkage by electron-density maps. Molecular dynamics simulations of the tetracutinase megamolecules using three different force field setups were performed and compared with the TEM observations. Using the Amberff99SB-disp + pH7 force field, the two-dimensional projection distances of the megamolecules were found to agree with the measured dimensions from TEM. The study described here, which combines high-resolution characterization with molecular dynamics simulations, will lead to a comprehensive understanding of the molecular structures and dynamics for this new class of molecules.

Stimuli responsive dynamic transformations in supramolecular gels

Supramolecular gels are formed by the self-assembly of small molecules under the influence of various non-covalent interactions. As the interactions are individually weak and reversible, it is possible to perturb the gels easily, which in turn enables fine tuning of their properties. Synthetic supramolecular gels are kinetically trapped and usually do not show time variable changes in material properties after formation. However, such materials potentially become switchable when exposed to external stimuli like temperature, pH, light, enzyme, redox, and chemical analytes resulting in reconfiguration of gel matrix into a different type of network. Such transformations allow gel-to-gel transitions while the changes in the molecular aggregation result in alteration of physical and chemical properties of the gel with time. Here, we discuss various methods that have been used to achieve gel-to-gel transitions by modifying a pre-formed gel material through external perturbation. We also describe methods that allow time-dependent autonomous switching of gels into different networks enabling synthesis of next generation functional materials. Dynamic modification of gels allows construction of an array of supramolecular gels with various properties from a single material which eventually extend the limit of applications of the gels. In some cases, gel-to-gel transitions lead to materials that cannot be accessed directly. Finally, we point out the necessity and possibility of further exploration of the field.

Enzyme-Directed Functionalization of Designed, Two-Dimensional Protein Lattices

The design and construction of crystalline protein arrays to selectively assemble ordered nanoscale materials have potential applications in sensing, catalysis, and medicine. Whereas numerous designs have been implemented for the bottom-up construction of protein assemblies, the generation of artificial functional materials has been relatively unexplored. Enzyme-directed post-translational modifications are responsible for the functional diversity of the proteome and, thus, could be harnessed to selectively modify artificial protein assemblies. In this study, we describe the use of phosphopantetheinyl transferases (PPTases), a class of enzymes that covalently modify proteins using coenzyme A (CoA), to site-selectively tailor the surface of designed, two-dimensional (2D) protein crystals. We demonstrate that a short peptide (ybbR) or a molecular tag (CoA) can be covalently tethered to 2D arrays to enable enzymatic functionalization using Sfp PPTase. The site-specific modification of two different protein array platforms is facilitated by PPTases to afford both small molecule- and protein-functionalized surfaces with no loss of crystalline order. This work highlights the potential for chemoenzymatic modification of large protein surfaces toward the generation of sophisticated protein platforms reminiscent of the complex landscape of cell surfaces.

Organizing Multi-Enzyme Systems into Programmable Materials for Biocatalysis

Significant advances in enzyme discovery, protein and reaction engineering have transformed biocatalysis into a viable technology for the industrial scale manufacturing of chemicals. Multi-enzyme catalysis has emerged as a new frontier for the synthesis of complex chemicals. However, the in vitro operation of multiple enzymes simultaneously in one vessel poses challenges that require new strategies for increasing the operational performance of enzymatic cascade reactions. Chief among those strategies is enzyme co-immobilization. This review will explore how advances in synthetic biology and protein engineering have led to bioinspired co-localization strategies for the scaffolding and compartmentalization of enzymes. Emphasis will be placed on genetically encoded co-localization mechanisms as platforms for future autonomously self-organizing biocatalytic systems. Such genetically programmable systems could be produced by cell factories or emerging cell-free systems. Challenges and opportunities towards self-assembling, multifunctional biocatalytic materials will be discussed.

Structural resolution of switchable states of a de novo peptide assembly

De novo protein design is advancing rapidly. However, most designs are for single states. Here we report a de novo designed peptide that forms multiple α-helical-bundle states that are accessible and interconvertible under the same conditions. Usually in such designs amphipathic α helices associate to form compact structures with consolidated hydrophobic cores. However, recent rational and computational designs have delivered open α-helical barrels with functionalisable cavities. By placing glycine judiciously in the helical interfaces of an α-helical barrel, we obtain both open and compact states in a single protein crystal. Molecular dynamics simulations indicate a free-energy landscape with multiple and interconverting states. Together, these findings suggest a frustrated system in which steric interactions that maintain the open barrel and the hydrophobic effect that drives complete collapse are traded-off. Indeed, addition of a hydrophobic co-solvent that can bind within the barrel affects the switch between the states both in silico and experimentally.

So far most of the de novo designed proteins are for single states only. Here, the authors present the de novo design and crystal structure determination of a coiled-coil peptide that assembles into multiple, distinct conformational states under the same conditions and further characterise its properties with biophysical experiments, NMR and MD simulations.

Noncovalent Self-Assembly of Protein Crystals with Tunable Structures

Engineering noncovalent interactions for assembling nonspherical proteins into supramolecular architectures with tunable morphologies and dynamics is challenging due to the structural heterogeneity and complexity of protein surfaces. Herein, we employed an anisotropic building block l-rhamnulose-1-phosphate aldolase (RhuA) to control supramolecular polymorphism in highly ordered protein assemblies by introducing histidine residues. Histidine-based π-π stacking interactions enabled thermodynamically controlled self-organization of RhuA to form three-dimensional (3D) nanoribbons and crystals. Self-assembly of different 3D crystal phases was kinetically modulated by the strong metal ion-histidine chelation, and double-helical protein superstructures were formed by engineering increased histidine interactions at the RhuA binding surface. Their structural properties and dynamics were determined via fluorescence microscopy, transmission electron microscopy, atomic force microscopy, and small-angle X-ray scattering. This work is aimed at expanding the toolbox for the programming of tunable, highly ordered, protein superstructures and increasing the understanding of the mechanisms of protein interfacial interactions.

Asymmetrizing an icosahedral virus capsid by hierarchical assembly of subunits with designed asymmetry

Symmetrical protein complexes are ubiquitous in biology. Many have been re-engineered for chemical and medical applications. Viral capsids and their assembly are frequent platforms for these investigations. A means to create asymmetric capsids may expand applications. Here, starting with homodimeric Hepatitis B Virus capsid protein, we develop a heterodimer, design a hierarchical assembly pathway, and produce asymmetric capsids. In the heterodimer, the two halves have different growth potentials and assemble into hexamers. These preformed hexamers can nucleate co-assembly with other dimers, leading to Janus-like capsids with a small discrete hexamer patch. We can remove the patch specifically and observe asymmetric holey capsids by cryo-EM reconstruction. The resulting hole in the surface can be refilled with fluorescently labeled dimers to regenerate an intact capsid. In this study, we show how an asymmetric subunit can be used to generate an asymmetric particle, creating the potential for a capsid with different surface chemistries.

Design of biologically active binary protein 2D materials

Ordered two-dimensional arrays such as S-layers^1,2 and designed analogues^3-5 have intrigued bioengineers^6,7, but with the exception of a single lattice formed with flexible linkers⁸, they are constituted from just one protein component. Materials composed of two components have considerable potential advantages for modulating assembly dynamics and incorporating more complex functionality^9-12. Here we describe a computational method to generate co-assembling binary layers by designing rigid interfaces between pairs of dihedral protein building blocks, and use it to design a p6m lattice. The designed array components are soluble at millimolar concentrations, but when combined at nanomolar concentrations, they rapidly assemble into nearly crystalline micrometre-scale arrays nearly identical to the computational design model in vitro and in cells without the need for a two-dimensional support. Because the material is designed from the ground up, the components can be readily functionalized and their symmetry reconfigured, enabling formation of ligand arrays with distinguishable surfaces, which we demonstrate can drive extensive receptor clustering, downstream protein recruitment and signalling. Using atomic force microscopy on supported bilayers and quantitative microscopy on living cells, we show that arrays assembled on membranes have component stoichiometry and structure similar to arrays formed in vitro, and that our material can therefore impose order onto fundamentally disordered substrates such as cell membranes. In contrast to previously characterized cell surface receptor binding assemblies such as antibodies and nanocages, which are rapidly endocytosed, we find that large arrays assembled at the cell surface suppress endocytosis in a tunable manner, with potential therapeutic relevance for extending receptor engagement and immune evasion. Our work provides a foundation for a synthetic cell biology in which multi-protein macroscale materials are designed to modulate cell responses and reshape synthetic and living systems.

Multivalent-Interaction-Driven Assembly of Discrete, Flexible, and Asymmetric Supramolecular Protein Nano-Prisms

Current approaches to design monodisperse protein assemblies require rigid, tight, and symmetric interactions between oligomeric protein units. Herein, we introduce a new multivalent-interaction-driven assembly strategy that allows flexible, spaced, and asymmetric assembly between protein oligomers. We discovered that two polygonal protein oligomers (ranging from triangle to hexagon) dominantly form a discrete and stable two-layered protein prism nanostructure via multivalent interactions between fused binding pairs. We demonstrated that protein nano-prisms with long flexible peptide linkers (over 80 amino acids) between protein oligomer layers could be discretely formed. Oligomers with different structures could also be monodispersely assembled into two-layered but asymmetric protein nano-prisms. Furthermore, producing higher-order architectures with multiple oligomer layers, for example, 3-layered nano-prisms or nanotubes, was also feasible.

Anisotropic Dynamics and Mechanics of Macromolecular Crystals Containing Lattice-Patterned Polymer Networks

The mechanical and functional properties of many crystalline materials depend on cooperative changes in lattice arrangements in response to external perturbations. However, the flexibility and adaptiveness of crystalline materials are limited. Additionally, the bottom-up, molecular-level design of crystals with desired dynamic and mechanical properties at the macroscopic level remains a considerable challenge. To address these challenges, we had previously integrated mesoporous, cubic ferritin crystals with hydrogel networks, resulting in hybrid materials (polymer-integrated crystals or PIX) which could undergo dramatic structural changes while maintaining crystalline periodicity and display efficient self-healing. The dynamics and mechanics of these ferritin-PIX were devoid of directionality, which is an important attribute of many molecular and macroscopic materials/devices. In this study, we report that such directionality can be achieved through the use of ferritin crystals with anisotropic symmetries (rhombohedral or trigonal), which enable the templated formation of patterned hydrogel networks in crystallo. The resulting PIX expand and contract anisotropically without losing crystallinity, undergo prompt bending motions in response to stimuli, and self-heal efficiently, capturing some of the essential features of sophisticated biological devices like skeletal muscles.

Role of Entropy in Colloidal Self-Assembly

Entropy plays a key role in the self-assembly of colloidal particles. Specifically, in the case of hard particles, which do not interact or overlap with each other during the process of self-assembly, the free energy is minimized due to an increase in the entropy of the system. Understanding the contribution of entropy and engineering it is increasingly becoming central to modern colloidal self-assembly research, because the entropy serves as a guide to design a wide variety of self-assembled structures for many technological and biomedical applications. In this work, we highlight the importance of entropy in different theoretical and experimental self-assembly studies. We discuss the role of shape entropy and depletion interactions in colloidal self-assembly. We also highlight the effect of entropy in the formation of open and closed crystalline structures, as well as describe recent advances in engineering entropy to achieve targeted self-assembled structures.

Assembly of a patchy protein into variable 2D lattices via tunable multiscale interactions

Self-assembly of molecular building blocks into higher-order structures is exploited in living systems to create functional complexity and represents a powerful strategy for constructing new materials. As nanoscale building blocks, proteins offer unique advantages, including monodispersity and atomically tunable interactions. Yet, control of protein self-assembly has been limited compared to inorganic or polymeric nanoparticles, which lack such attributes. Here, we report modular self-assembly of an engineered protein into four physicochemically distinct, precisely patterned 2D crystals via control of four classes of interactions spanning Ångström to several-nanometer length scales. We relate the resulting structures to the underlying free-energy landscape by combining in-situ atomic force microscopy observations of assembly with thermodynamic analyses of protein-protein and -surface interactions. Our results demonstrate rich phase behavior obtainable from a single, highly patchy protein when interactions acting over multiple length scales are exploited and predict unusual bulk-scale properties for protein-based materials that ensue from such control.

As nanoscale building blocks, proteins offer unique advantages, including monodispersity and atomically tunable interactions, but their self-assembly is limited compared to inorganic or polymeric nanoparticles. Here, the authors show modular self-assembly of an engineered protein into four physicochemically distinct patterned 2D crystals via control of four classes of interactions.

Entropic Nature of the Debye Relaxation in Glass-Forming Monoalcohols

The dynamics and thermodynamics of the Debye and structural (α) relaxations in isomeric monoalcohols near the glass transition temperature T_g are explored using dielectric and calorimetric techniques. The α relaxation strength at T_g is found to correlate with the heat capacity increment, but no thermal signals can be detected to link to the Debye relaxation. We also observed that the activation energy of the Debye relaxation in monoalcohols is quantitatively correlated with that of the α relaxation at the kinetic T_g, sharing the dynamic behavior of the Rouse modes found in polymers. The experimental results together with the analogy to the Rouse modes in polymers suggest that the Debye process in monoalcohols is an entropic process manifested by the total dipole fluctuation of the supramolecular structures, which is triggered and driven by the α relaxation.

Depletion Effect-mediated Association of Carbon Nanotube-Polymer Composites and Their Application as Inexpensive Electrode Support Materials

The association between carbon nanotubes (CNTs) and polymers to afford functional composites has been attributed to enthalpic interactions, neglecting the entropic depletion effect, in which bound solvents are released during the association process. Here, we show that association between multiwalled CNTs and common polymers is governed by the depletion effect, generating a corresponding entropic free energy up to ca. 13 kJ mol^-1 at room temperature, while the enthalpic contribution is insignificant or even negative. Notably, association between the polymers and the CNTs takes place preferentially at the highly stacked CNT junctions, leading to mechanical reinforcement without impacting conductivity. Consequently, high-performance composite membranes were fabricated from inexpensive multiwalled CNTs and polyacrylonitrile (PAN) and were used as electrode supports for platinum (Pt) nanoparticles, affording specific currents 6-7-fold higher than that of Pt foil in the hydrogen evolution reaction and displaying outstanding stability.

Modulation of the Self-Assembly of π-Amphiphiles in Water from Enthalpy- to Entropy-Driven by Enwrapping Substituents

Depending on the connectivity of solubilizing oligoethylene glycol (OEG) side chains to the π-cores of amphiphilic naphthalene and perylene bisimide dyes, self-assembly in water occurs either upon heating or cooling. Herein, we show that this effect originates from differences in the enwrapping capability of the π-cores by the OEG chains. Rylene bisimides bearing phenyl substituents with three OEG chains attached directly to the hydrophobic π-cores are strongly sequestered by the OEG chains. These molecules self-assemble at elevated temperatures in an entropy-driven process according to temperature- and concentration-dependent UV/Vis spectroscopy and calorimetric dilution studies. In contrast, for rylene bisimides in which phenyl substituents with three OEG chains are attached via a methylene spacer, leading to much weaker sequestration, self-assembly originates upon cooling in an enthalpy-driven process. Our explanation for this controversial behavior is that the aggregation in the latter case is dictated by the release of "high energy water" from the hydrophobic π-surfaces as well as dispersion interactions between the π-scaffolds which drive the self-assembly in an enthalpically driven process. In contrast, for the former case we suggest that in addition to the conventional explanation of a dehydration of hydrogen-bonded water molecules from OEG units it is in particular the increase in conformational entropy of back-folded OEG side chains upon aggregation that provides the pronounced gain in entropy that drives the aggregation process. Thus, our studies revealed that a subtle change in the attachment of solubilizing substituents can switch the thermodynamic signature for the self-assembly of amphiphilic dyes in water from enthalpy- to entropy-driven.

Precise Fabrication of De Novo Nanoparticle Lattices on Dynamic 2D Protein Crystalline Lattices

The science of protein self-assembly has experienced significant development, from discrete building blocks of self-assembled nanoarchitectures to advanced nanostructures with adaptive functionalities. Despite the prominent achievements in the field, the desire of designing de novo protein-nanoparticle (NP) complexes and constructing dynamic NP systems remains highly challenging. In previous works, l-rhamnulose-1-phosphate aldolase (^C98RhuA) tetramers were self-assembled into two-dimensional (2D) lattices via disulfide bond interactions. These interactions provided 2D lattices with high structural quality and a sophisticated assembly mode. In this study, we devised a rational design for RhuA building blocks to fabricate 2D functionalized protein lattices. More importantly, the lattices were used to direct the precise assembly of NPs into highly ordered and diverse nanoarchitectures. These structures can be employed as an excellent tool to adequately verify the self-assembly mode and structural quality of the designed RhuA crystals. The subsequent redesign of RhuA building blocks enabled us to predictably produce a novel protein lattice whose conformational dynamics can be controllably regulated. Thus, a dynamic system of AuNP lattices was achieved. Transmission electron microscopy and small-angle X-ray scattering indicated the presence of these diverse NP lattices. This contribution enables the fabrication of future NP structures in a more programmable manner with more expected properties for potential applications in nanoelectronics and other fields.

Employing 25-Residue Docking Motifs from Modular Polyketide Synthases as Orthogonal Protein Connectors

The proteins of trans-acyltransferase modular polyketide synthases (PKSs) self-organize into assembly lines, enabling the multienzyme biosynthesis of complex organic molecules. Docking domains comprised of ∼25 residues at the C- and N-termini of these polypeptides (^CDDs and ^NDDs) help drive this association through the formation of four-helix bundles. Molecular connectors like these are desired in synthetic contexts, such as artificial biocatalytic systems and biomaterials, to orthogonally join proteins. Here, the ability of six ^CDD/^NDD pairs to link non-PKS proteins is examined using green fluorescent protein (GFP) variants. As observed through size-exclusion chromatography and Förster resonance energy transfer (FRET), matched but not mismatched pairs of Venus+^CDD and ^NDD+mTurquoise2 fusion proteins associate with low micromolar affinities.

The de novo design of α-helical peptides for supramolecular self-assembly

One approach to designing de novo proteinaceous assemblies and materials is to develop simple, standardised building blocks and then to combine these symmetrically to construct more-complex higher-order structures. This has been done extensively using β-structured peptides to produce peptide fibres and hydrogels. Here, we focus on building with de novo α-helical peptides. Because of their self-contained, well-defined structures and clear sequence-to-structure relationships, α helices are highly programmable making them robust building blocks for biomolecular construction. The progress made with this approach over the past two decades is astonishing and has led to a variety of de novo assemblies, including discrete nanoscale objects, and fibrous, nanotube, sheet and colloidal materials. This body of work provides an exceptionally strong foundation for advancing the field beyond in vitro design and into in vivo applications including what we call protein design in cells.

Protein Assemblies: Nature-Inspired and Designed Nanostructures

Ordered protein assemblies are attracting interest as next-generation biomaterials with a remarkable range of structural and functional properties, leading to potential applications in biocatalysis, materials templating, drug delivery and vaccine development. This Review covers ordered protein assemblies including protein nanowires/nanofibrils, nanorings, nanotubes, designed two- and three-dimensional ordered protein lattices and protein-like cages including polyhedral virus-like cage structures. The main focus is on designed ordered protein assemblies, in which the spatial organization of the proteins is controlled by tailored noncovalent interactions (including metal ion binding interactions, electrostatic interactions and ligand–receptor interactions among others) or by careful design of modified (mutant) proteins or de novo constructs. The modification of natural protein assemblies including bacterial S-layers and cage-like and rod-like viruses to impart novel function, e.g. enzymatic activity, is also considered. A diversity of structures have been created using distinct approaches, and this Review provides a summary of the state-of-the-art in the development of these systems, which have exceptional potential as advanced bionanomaterials for a diversity of applications.

Multivalent Traptavidin-DNA Conjugates for the Programmable Assembly of Nanostructures

Here, we explore the extended utility of two important functional biomolecules, DNA and protein, by hybridizing them through avidin-biotin conjugation. We report a simple yet scalable technique of successive magnetic separations to synthesize traptavidin-DNA conjugates with four distinct DNA binding sites that can be used as a supramolecular building block for programmable assembly of nanostructures. Using this nanoassembly platform, we fabricate several different plasmonic nanostructures with various metallic as well as semiconductor nanoparticles in predetermined ways. We also use the platform to construct dendrimer nanostructures using valency-controlled traptavidin-DNA conjugates in a programmable manner. These results suggest that our protein-DNA supramolecular building blocks would make a significant contribution to the assembly of multicomponent and complex nanostructures for numerous contemporary and future applications from molecular imaging to drug delivery.

Annealing multicomponent supramolecular gels

Annealing is widely used as a means of changing the physical properties of a material. The rate of heating and cooling used in the annealing process controls the final properties. Annealing can be used as a means of driving towards the, or at least a, thermodynamic minimum. There is surprisingly little information on annealing kinetically-trapped supramolecular gels. Here, we show that annealing multicomponent gels can be used to prepare materials with tunable mechanical properties. We show that annealing in a two-component gel leads to a self-sorted network, which has significantly different mechanical properties to the as-prepared gels. Whilst the fibres are self-sorted, we show that the annealing of this system leads to significant change in the network level of assembly, and it is this that leads to the increase in storage modulus. We also show that it is possible to selectively anneal only a single component in the mixture.

Construction of supramolecular nanotubes from protein crystals

Investigations involving the design of protein assemblies for the development of biomaterials are receiving significant attention. In nature, proteins can be driven into assemblies frequently by various non-covalent interactions. Assembly of proteins into supramolecules can be conducted under limited conditions in solution. These factors force the assembly process into an equilibrium state with low stability. Here, we report a new method for preparing assemblies using protein crystals as non-equilibrium molecular scaffolds. Protein crystals provide an ideal environment with a highly ordered packing of subunits in which the supramolecular assembled structures are formed in the crystalline matrix. Based on this feature, we demonstrate the self-assembly of supramolecular nanotubes constructed from protein crystals triggered by co-oxidation with cross-linkers. The assembly of tubes is driven by the formation of disulfide bonds to retain the intermolecular interactions within each assembly in the crystalline matrix after dissolution of the crystals.

Recovery of Protein Folding Funnels from Single-Molecule Time Series by Delay Embeddings and Manifold Learning

The stability and folding of proteins is governed by the underlying single-molecule free energy surface (smFES) mapping the free energy of the molecule as a function of configurational state. Ascertaining the smFES is of great value in understanding and engineering protein structure and function. By integrating tools from dynamical systems theory and nonlinear manifold learning, we describe an approach to reconstruct the multidimensional smFES for a protein from a time series in a single experimentally measurable observable. We employ Takens' delay embeddings to project the time series into a high-dimensional space in which the projected dynamics are C¹-equivalent to the true system dynamics and employ diffusion maps to recover a low-dimensional reconstruction of the smFES that is equivalent to the true smFES up to a smooth and invertible transformation. We validate the approach in molecular dynamics simulations of Trp-cage, Villin, and BBA to demonstrate that landscapes recovered from univariate time series in the head-to-tail distance are topologically identical-they precisely preserve the metastable states and folding pathways-and topographically approximate-the free energy barrier heights and well depths are approximately preserved-to the true landscapes determined from complete knowledge of all atomic coordinates. We go on to show that the reconstructed landscapes reliably predict temperature denaturation and identify point mutations and groups of mutations critical to folding. These results demonstrate that protein folding funnels can be reconstructed from experimentally measurable time series and used to understand and engineer folding.

Determining the Structural and Energetic Basis of Allostery in a De Novo Designed Metalloprotein Assembly

Despite significant progress in protein design, the construction of protein assemblies that display complex functions (e.g., catalysis or allostery) remains a significant challenge. We recently reported the de novo construction of an allosteric supramolecular protein assembly (Zn-C38/C81/C96R14) in which the dissociation and binding of ZnII ions were coupled over a distance of 15 Å to the selective hydrolytic breakage and formation of a single disulfide bond. Zn-C38/C81/C96R14 was constructed by ZnII-templated assembly of a monomeric protein (R1, a derivative of cytochrome cb562) into a tetramer, followed by progressive incorporation of noncovalent and disulfide bonding interactions into the protein-protein interfaces to create a strained quaternary architecture. The interfacial strain thus built allowed mechanical coupling between the binding/dissociation of ZnII and formation/hydrolysis of a single disulfide bond (C38-C38) out of a possible six. While the earlier study provided structural evidence for the two end-states of allosteric coupling, the energetic basis for allosteric coupling and the minimal structural requirements for building this allosteric system were not understood. Toward this end, we have characterized the structures and Zn-binding properties of two related protein constructs (C38/C96R1 and C38R1) which also possess C38-C38 disulfide bonds. In addition, we have carried out extensive molecular dynamics simulations of C38/C81/C96R14 to understand the energetic basis for the selective cleavage of the C38-C38 disulfide bond upon ZnII dissociation. Our analyses reveal that the local interfacial environment around the C38-C38 bond is key to its selective cleavage, but this cleavage is only possible within the context of a stable quaternary architecture which enables structural coupling between ZnII coordination and the protein-protein interfaces.