Solution processable metal-organic frameworks for mixed matrix membranes using porous liquids

Rational Matching of Metal-Organic Frameworks and Polymers in Mixed Matrix Membranes for Efficient Propylene/Propane Separation

The exploitation of high-performance membranes selective for propylene is important for developing energy-efficient propylene/propane (C3H6/C3H8) separation technologies. Although metal-organic frameworks with a molecular sieving property have been considered promising filler materials in mixed-matrix membranes (MMMs), their use in practical applications has been challenging due to a lack of interface compatibility. Herein, we adopted a surface coordination strategy that involved rationally utilizing carboxyl-functionalized PIM-1 (cPIM) and ZIF-8 to prepare a mixed-matrix membrane for efficient propylene/propane separation. The interfacial coordination between the polymer and the MOF improves their compatibility and eliminates the need for additional modification of the MOF, thereby maximizing the inherent screening performance of the MOF filler. Additionally, the utilization of porous PIM-1 guaranteed the high permeability of the MMMs. The obtained MMMs exhibited excellent separation performance. The 30 wt% ZIF-8/cPIM-1 membrane performed the best, exhibiting a high C3H6 permeability of 1023 Barrer with a moderate C3H6/C3H8 selectivity of 13.97 under 2 bars of pressure. This work presents a method that can feasibly be used for the preparation of defect-free MOF-based MMMs for specific gas separations.

Advancing Membrane Technology: Ordered Macroporous ZIF-67 as a Filler in Mixed Matrix Membranes for Enhanced Propylene/Propane Separation

Conventional separation technologies for valuable commodities require substantial energy, accounting for 10%-15% of global consumption. Mixed-matrix membranes (MMMs) offer a promising solution by combining processable polymers with selective inorganic fillers. Here, the potential of using ordered microporous structured materials is demonstrated as MMM fillers. The use of ordered macroporous ZIF-67 in combination with the well-known 6FDA-DAM polymer leads to superior performance in the important separation of propylene from propane. The enhanced performance can be rationalized with the help of advanced microscopy, which demonstrates that the polymer is able to penetrate the macroporous network around which the MOF (Metal-Organic Framework) is synthesized, resulting in a much better interphase between the two components and the homogeneous distribution of the filler, even at high loadings.

Prediction of adsorption performance of ZIF-67 for malachite green based on artificial neural network using L-BFGS algorithm

Given the necessity and urgency in removing organic pollutants such as malachite green (MG) from the environment, it is vital to screen high-capacity adsorbents using artificial neural network (ANN) methods quickly and accurately. In this study, a series of ZIF-67 were synthesized, which adsorption properties for organic pollutants, especially MG, were systematically evaluated and determined as 241.720 mg g-1 (25 ℃, 2 h). The adsorption process was more consistent with pseudo-second-order kinetics and Langmuir adsorption isotherm, which correlation coefficients were 0.995 and 0.997, respectively. The chemisorption mechanism was considered to be π-π stacking interaction between imidazole and aromatic ring. Then, a Python-based neural network model using the Limited-memory BFGS algorithm was constructed by collecting the crucial structural parameters of ZIF-67 and the experimental data of batch adsorption. The model, optimized extensively, outperformed similar Matlab-based ANN with a coefficient of determination of 0.9882 and mean square error of 0.0009 in predicting ZIF-67 adsorption of MG. Furthermore, the model demonstrated a good generalization ability in the predictive training of other organic pollutants. In brief, ANN was successfully separated from the Matlab platform, providing a robust framework for high-precision prediction of organic pollutants and guiding the synthesis of adsorbents.

Highly Permeable Mixed Matrix Membranes for Gas Separation via Dual Defect-Engineered Zeolitic Imidazolate Framework-8

Defect engineering of metal-organic frameworks (MOFs) is a promising strategy for tailoring the interfacial characteristics between MOFs and polymers, aiming to create high-performance mixed matrix membranes (MMMs). This study introduces a new approach using dual defective alkylamine (AA)-modulated zeolitic imidazolate framework-8 (DAZIF-8), to develop high-flux MMMs. Tributylamine (TBA) and triethylamine (TEA) monodentate ligands coordinate with zinc ions in varying compositions. A mixture of Zn(CH3COO)2·2H2O:2-methylimidazole (Mim):AA in a 1:1.75:5 molar ratio facilitates high-yield coordination between Zn and multiple organic ligands, including Zn-Mim, Zn-TEA, and Zn-TBA (>80%). Remarkably, DAZIF-8 containing 3 mol% TBA and 2 mol% TEA exhibits exceptional characteristics, such as a Brunauer-Emmett-Teller surface area of 1745 m2 g-1 and enhanced framework rigidity. Furthermore, dual Zn-AA coordination sites on the framework's outer surface enhance compatibility with the polyimide (PI) matrix through electron donor-acceptor interactions, enabling the fabrication of high-loading MMMs with excellent mechanical durability. Importantly, the PI/DAZIF-8 (60/40 w/w) MMM demonstrates an unprecedented 759% enhancement in ethylene (C2H4) permeability (281 Barrer) with a moderate ethylene/ethane (C2H4/C2H6) selectivity of 2.95 compared to the PI, surpassing the polymeric upper limit for C2H4/C2H6 separation.

Design of Mixed-Matrix MOF Membranes with Asymmetric Filler Density and Intrinsic MOF/Polymer Compatibility for Enhanced Molecular Sieving

The separation of high-value-added chemicals from organic solvents is important for many industries. Membrane-based nanofiltration offers a more energy-efficient separation than the conventional thermal processes. Conceivably, mixed-matrix membranes (MMMs), encompassing metal-organic frameworks (MOFs) as fillers, are poised to promote selective separation via molecular sieving, synergistically combining polymers flexibility and fine-tuned porosity of MOFs. Nevertheless, conventional direct mixing of MOFs with polymer solutions results in underutilization of the MOF fillers owing to their uniform cross-sectional distribution. Therefore, in this work, a multizoning technique is proposed to produce MMMs with an asymmetric-filler density, in which the MOF fillers are distributed only on the surface of the membrane, and a seamless interface at the nanoscale. The design strategy demonstrates five times higher MOF surface coverage, which results in a solvent permeance five times higher than that of conventional MMMs while maintaining high selectivity. Practically, MOFs are paired with polymers of similar chemical nature to enhance their adhesion without the need for surface modification. The approach offers permanently accessible MOF porosity, which translates to effective molecular sieving, as exemplified by the polybenzimidazole and Zr-BI-fcu-MOF system. The findings pave the way for the development of composite materials with a seamless interface.

Large-Area Ultrathin Metal-Organic Framework Membranes Fabricated on Flexible Polymer Supports for Gas Separations

Ultrathin continuous metal-organic framework (MOF) membranes have the potential to achieve high gas permeance and selectivity simultaneously for otherwise difficult gas separations, but with few exceptions for zeolitic-imidazolate frameworks (ZIF) membranes, current methods cannot conveniently realize practical large-area fabrication. Here, we propose a ligand back diffusion-assisted bipolymer-directed metal ion distribution strategy for preparing large-area ultrathin MOF membranes on flexible polymeric support layers. The bipolymer directs metal ions to form a cross-linked two-dimensional (2D) network with a uniform distribution of metal ions on support layers. Ligand back diffusion controls the feed of ligand molecules available for nuclei formation, resulting in the continuous growth of large-area ultrathin MOF membranes. We report the practical fabrication of three representative defect-free MOF membranes with areas larger than 2,400 cm2 and ultrathin selective layers (50-130 nm), including ZIFs and carboxylate-linker MOFs. Among these, the ZIF-8 membrane displays high gas permeance of 3,979 GPU for C3H6, with good mixed gas selectivity (43.88 for C3H6/C3H8). To illustrate its scale-up practicality, MOF membranes were prepared and incorporated into spiral-wound membrane modules with an active area of 4,800 cm2. The ZIF-8 membrane module presents high gas permeance (3,930 GPU for C3H6) with acceptable ideal gas selectivity (37.45 for C3H6/C3H8).

Supramolecular Complexation Reinforced Polymer Frustrated Packing: Controllable Dual Porosity for Improved Permselectivity of Coordination Nanocage Mixed Matrix Membranes

The developments of mixed matrix membranes (MMMs) are severely hindered by the complex inter-phase interaction and the resulting poor utilization of inorganics' microporosity. Herein, a dual porosity framework is constructed in MMMs to enhance the accessibility of inorganics' microporosity to external gas molecules for the effective application of microporosity for gas separation. Nanocomposite organogels are first prepared from the supramolecular complexation of rigid polymers and 2 nm microporous coordination nanocages (CNCs). The network structures can be maintained with microporous features after solvent removal originated from the rigid nature of polymers, and the strong coordination and hydrogen bond between the two components. Moreover, the strong supramolecular attraction reinforces the frustrated packing of the rigid polymers on CNC surface, leading to polymer networks' extrinsic pores and the interconnection of CNCs' micro-cavities for the fast gas transportation. The gas permeabilities of the MMMs are 869 times for H2 and 1099 times for CO2 higher than those of pure polymers. The open metal sites from nanocage also contribute to the enhanced gas selectivity and the overall performance surpasses 2008 H2/CO2 Robeson upper bound. The supramolecular complexation reinforced packing frustration strategy offers a simple and practical solution to achieve improved gas permselectivity in MMMs.

Functional metal-organic liquids

For decades, the study of coordination polymers (CPs) and metal-organic frameworks (MOFs) has been limited primarily to their behavior as crystalline solids. In recent years, there has been increasing evidence that they can undergo reversible crystal-to-liquid transitions. However, their "liquid" states have primarily been considered intermediate states, and their diverse properties and applications of the liquid itself have been overlooked. As we learn from organic polymers, ceramics, and metals, understanding the structures and properties of liquid states is essential for exploring new properties and functions that are not achievable in their crystalline state. This review presents state-of-the-art research on the liquid states of CPs and MOFs while discussing the fundamental concepts involved in controlling them. We consider the different types of crystal-to-liquid transitions found in CPs and MOFs while extending the interpretation toward other functional metal-organic liquids, such as metal-containing ionic liquids and porous liquids, and try to suggest the unique features of CP/MOF liquids. We highlight their potential applications and present an outlook for future opportunities.

Tailoring Type III Porous Ionic Liquids for Enhanced Liquid-Liquid Two-Phase Catalysis

Porous Ionic Liquids (PILs) have gained attention but facing challenges in catalysis, especially in liquid-liquid two-phase reactions due to limited catalytic sites and hydrophilicity control. This work engineered a Type III PILs (PILS-M) using zeolitic imidazolate framework-8 (ZIF-8) confined phosphomolybdic acid (HPMo) as the microporous framework and N-butyl pyridine bis(trifluoromethane sulfonyl) imide ionic liquid ([Bpy][NTf2]) as the solvent. The PILS-M not only combines the advantages of traditional ionic liquids and microporous frameworks, including excellent extraction, high dispersion of catalytically active species, remarkable stability, etc., but also can make the inner surface of ZIF-8 turned to be hydrophilic that favors the contact between aqueous hydrogen peroxide oxidant and catalytically active sites for the promotion of catalytic performance in reactive extractive desulfurization (REDS) processes of fuel oils. This study demonstrates Type III PILs' potential as catalysts for sustainable chemical processes, offering insights into versatile PILs applications in diverse fields.

Recent advances in the interfacial engineering of MOF-based mixed matrix membranes for gas separation

The membrane process stands as a promising and transformative technology for efficient gas separation due to its high energy efficiency, operational simplicity, low environmental impact, and easy up-and-down scaling. Metal-organic framework (MOF)-polymer mixed matrix membranes (MMMs) combine MOFs' superior gas-separation performance with polymers' processing versatility, offering the opportunity to address the limitations of pure polymer or inorganic membranes for large-scale integration. However, the incompatibility between the rigid MOFs and flexible polymer chains poses a challenge in MOF MMM fabrication, which can cause issues such as MOF agglomeration, sedimentation, and interfacial defects, substantially weakening membrane separation efficiency and mechanical properties, particularly gas separation. This review focuses on engineering MMMs' interfaces, detailing recent strategies for reducing interfacial defects, improving MOF dispersion, and enhancing MOF loading. Advanced characterisation techniques for understanding membrane properties, specifically the MOF-polymer interface, are outlined. Lastly, it explores the remaining challenges in MMM research and outlines potential future research directions.

Crosslinking-induced patterning of MOFs by direct photo- and electron-beam lithography

Metal-organic frameworks (MOFs) with diverse chemistry, structures, and properties have emerged as appealing materials for miniaturized solid-state devices. The incorporation of MOF films in these devices, such as the integrated microelectronics and nanophotonics, requires robust patterning methods. However, existing MOF patterning methods suffer from some combinations of limited material adaptability, compromised patterning resolution and scalability, and degraded properties. Here we report a universal, crosslinking-induced patterning approach for various MOFs, termed as CLIP-MOF. Via resist-free, direct photo- and electron-beam (e-beam) lithography, the ligand crosslinking chemistry leads to drastically reduced solubility of colloidal MOFs, permitting selective removal of unexposed MOF films with developer solvents. This enables scalable, micro-/nanoscale (≈70 nm resolution), and multimaterial patterning of MOFs on large-area, rigid or flexible substrates. Patterned MOF films preserve their crystallinity, porosity, and other properties tailored for targeted applications, such as diffractive gas sensors and electrochromic pixels. The combined features of CLIP-MOF create more possibilities in the system-level integration of MOFs in various electronic, photonic, and biomedical devices.

Bendable and Chemically Stable Metal-Organic Hybrid Membranes for Molecular Separation

Crystalline porous metal-organic materials are ideal building blocks for separation membranes because of their molecular-sized pores and highly ordered pore structure. However, creating ultrathin, defect-free crystalline membranes is challenging due to inevitable grain boundaries. Herein, we reported an amorphous metal-organic hybrid (MOH) membrane with controlled microporosity. The synthesis of the MOH membrane entails the use of titanium alkoxide and organic linkers containing di/multicarboxyl groups as monomers in the polymerization reaction. The resultant membranes exhibit similar microporosity to existing molecular sieve materials and high chemical stability against harsh chemical environments owing to the formation of stable Ti-O bonds between metal centers and organic linkers. An interfacial polymerization is developed to fabricate an ultrathin MOH membrane (thickness of the membrane down to 80 nm), which exhibits excellent rejections (>98% for dyes with molecular weights larger than 690 Da) and high water permeance (55 L m-2 h-1 bar-1). The membranes also demonstrate good flexibility, which greatly improves the processability of the membrane materials.

2D MOFs and Zeolites for Composite Membrane and Gas Separation Applications: A Brief Review

Commercial membranes have predominantly been fabricated from polymers due to their economic viability and processability. This choice offers significant advantages in energy efficiency, cost-effectiveness, and operational simplicity compared to conventional separation techniques like distillation. However, polymeric membranes inherently exhibit a trade-off between their permeability and selectivity, which is summarized in the Robeson upper bound. To potentially surpass these limitations, mixed-matrix membranes (MMMs) can be an alternative solution, which can be constructed by combining polymers with inorganic additives such as metal-organic frameworks (MOFs) and zeolites. Incorporating high-aspect-ratio fillers like MOF nanosheets and zeolite nanosheets is of significant importance. This incorporation not only enhances the efficiency of separation processes but also reinforces the mechanical robustness of the membranes. We outline synthesis techniques for producing two-dimensional (2D) crystals (including nanocrystals with high aspect ratio) and provide examples of their integration into membranes to customize separation performances. Moreover, we propose a potential trajectory for research in the area of high-aspect-ratio materials-based MMMs, supported by a mathematical-model-based performance prediction.

Design Principles Guiding Solvent Size Selection in ZIF-Based Type 3 Porous Liquids for Permanent Porosity

Porous liquids (PLs), which are solvent-based systems that contain permanent porosity due to the incorporation of a solid porous host, are of significant interest for the capture of greenhouse gases, including CO2. Type 3 PLs formed by using metal-organic frameworks (MOFs) as the nanoporous host provide a high degree of chemical turnability for gas capture. However, pore aperture fluctuation, such as gate-opening in zeolitic imidazole framework (ZIF) MOFs, complicates the ability to keep the MOF pores available for gas adsorption. Therefore, an understanding of the solvent molecular size required to ensure exclusion from MOFs in ZIF-based Type 3 PLs is needed. Through a combined computational and experimental approach, the solvent-pore accessibility of exemplar MOF ZIF-8 was examined. Density functional theory (DFT) calculations identified that the lowest-energy solvent-ZIF interaction occurred at the pore aperture. Experimental density measurements of ZIF-8 dispersed in various-sized solvents showed that ZIF-8 adsorbed solvent molecules up to 2 Å larger than the crystallographic pore aperture. Density analysis of ZIF dispersions was further applied to a series of possible ZIF-based PLs, including ZIF-67, -69, -71(RHO), and -71(SOD), to examine the structure-property relationships governing solvent exclusion, which identified eight new ZIF-based Type 3 PL compositions. Solvent exclusion was driven by pore aperture expansion across all ZIFs, and the degree of expansion, as well as water exclusion, was influenced by ligand functionalization. Using these results, a design principle was formulated to guide the formation of future ZIF-based Type 3 PLs that ensures solvent-free pores and availability for gas adsorption.

Uniformly Distributed Mixed Matrix Membranes via a Solution Processable Strategy for Propylene/Propane Separation

Aggregation of filler particles during the formation of mixed matrix membranes is difficult to avoid when filler loadings exceed a 10-15 wt %. Such agglomeration usually leads to poor membrane performance. In this work, using a ZIF-67 metal-organic framework (MOF) as filler along with surface modification of Ag4 tz4 to improve processability and selective olefin adsorption, we demonstrate that highly loaded with a very low agglomeration degree membranes can be synthesized displaying unmatched separation selectivity (39) for C3 H6 /C3 H8 mixtures and high permeability rates (99 Barrer), far surpassing previous reports in the literature. Through molecular dynamics simulation, the enhanced compatibility between ZIF-67 and polymer matrix with adding Ag4 tz4 was proven and the tendency in gas permeability and C3 H6 selectivity in the mixed matrix membranes (MMMs) were well explained. More importantly, the membrane showed a wide range of pressure and temperature resistance, together with remarkable long-term stability (>900 h). The modification method might help solve interface issues in MMMs and can be extended to the fabrication of other fillers to achieve high performance MMMs for gas separation.

Pore-Networked Soft Materials Based on Metal-Organic Polyhedra

ConspectusThe last two decades have witnessed a tremendous development of crystalline microporous adsorbents in a wide range of applications including molecular adsorption, storage and separation, purification, as well as catalysis. The main players as porous materials that have contributed to the developments are extended molecular frameworks (e.g., metal-organic frameworks, MOFs; covalent-organic frameworks, COFs) or discrete porous molecules (e.g., metal-organic cages, MOCs; porous organic cages, POCs) thanks to the high degrees of freedom in their structural designability and tunability. To overcome the processability issue originating from their powder forms after synthesis, one main strategy is to hybridize the microporous adsorbents as pore-containing fillers with solvents or polymers as processable matrices to produce porous soft materials, such as porous liquids, gels/aerogels, and mixed-matrix membranes, depending on the form of matrix used. Nevertheless, the fabrication of "ideal" hybrid materials relies on the homogeneous distribution of the pore-containing fillers within the matrices. It is still challenging to find a versatile way to solve the aggregation issues of fillers and their insufficient interaction with the matrices, which are concerned with inhibiting the translation of the distinctive properties of microporous adsorbents into the obtained hybrid soft materials.Herein, we describe a new bottom-up approach for the fabrication of "pore-networked soft materials" based on the concept of directly interconnecting the pore-containing fillers into a continuous pore network within the matrices. The advantages of the pore-networking strategy lie in two main aspects: (i) the elimination of the need to struggle with the aggregation issue of fillers due to their overall interconnection throughout the matrices; (ii) the generation of continuous pore networks that guarantee the efficient molecular mass transfer in the materials. In this Account, we summarize our state-of-the-art progress of pore-networked soft materials based on the use of MOCs, alternatively called metal-organic polyhedra (MOPs) herein, as pore units for the pore network construction. The good solubility of MOPs in organic solvents allows them to be feasibly processed in solution, wherein the coordination of MOPs with organic linkers leads to the formation of linked MOP gels featuring not only intrinsic MOP cavities but also tunable extrinsic porosities generated between linked MOPs through the control of MOP/linker structures and network connectivity. Furthermore, the matrix of the linked MOP network, here referred to as the continuous phase with respect to the entire porous MOP network, is not limited to the solvents. We anticipate that the implementation of air, liquids, and polymers as the matrices could result in different forms of pore-networked soft materials like aerogels, foams, gels, monoliths, and membranes. For instance, we demonstrate the fabrication of linked MOP aerogel and permanently porous gel with their potential applications on selective CO2 photoreduction and gas sorption, respectively. We believe that the pore-network strategies will advance the development of porous soft materials featuring unique advantages and properties beyond the current hybrid systems.

Pyrolysis-Free Covalent Organic Polymers Directly for Oxygen Electrocatalysis

ConspectusOxygen electrode catalysis is crucial for the efficient operation of clean energy devices, such as proton exchange membrane fuel cells (PEMFCs) and Zn-air batteries (ZABs). However, sluggish oxygen electrocatalysis kinetics in these infrastructures put forward impending requirements toward seeking efficient oxygen-electrode catalytic materials with a clear active-site configuration and geometrical morphology to study in depth the structure-property relationship of materials. Although transition-metal-nitrogen-carbon (M-N-C) electrocatalysts have shown great prospects currently and potential in oxygen electrocatalysis as promising platinum group metal-free catalysts, the universal pyrolysis operation in the preparation process often inevitably brings about randomness and diversity of active sites, for which it is difficult to determine the structure-activity relationship, understand the catalytic mechanism, and further improve facilities performance.Covalent organic polymers (COPs) are a class of molecular geometric constructs linked by irreversible kinetic covalent bonds through reticular chemistry. Unique structural tailorability, diverse design principles, and inherent well-defined construction in pristine COPs naturally provide a great platform to study the structure-property relationship of active sites and exhibit unique features for application. In this Account, we afford an overview of our recent attempts toward the utilization of COP materials as free-pyrolysis oxygen electrode catalysts, enabling accurate construction of oxygen electrodes with clear active site and geometrical morphology characteristics in PEMFC and ZAB devices yet without enduring any high-temperature pyrolysis treatments. Starting from the needs of modern electrocatalysis, we discussed the unique properties for the design and development of pyrolysis-free pristine COPs as high-performance oxygen electrode catalytic materials in terms of intrinsic electronic structure properties and membrane-electrode-assembly (MEA) application distinguished from pyrolysis M-N-C catalysts. First, the pyrolysis-free COP catalysts provide a viable molecular model catalyst platform, which is conducive to mechanism comprehension for the relationship between catalyst activity and structure. Second, the simple and low-energy consumption synthesis process for pyrolysis-free catalysts lays the foundation for the large-scale production of catalysts, oxygen electrodes, and even the entire stack assembly without considering numerous complicated factors as traditional pyrolytic catalysts. Besides, most traditional COPs are difficult to dissolve and solution process due to their cross-linked skeleton. Our newly developed COP materials with solution processability bring about new opportunities to the process and assemble oxygen electrodes into device. These properties are unparalleled and have not been systematically reviewed and analyzed by any research reports so far. Here, we have clarified the specific advantage and potential of pyrolysis-free COP materials as oxygen electrodes applied in PEMFC and ZAB devices in response to the latest progress and requirements of current electrocatalytic research.

Precise control over gas-transporting channels in zeolitic imidazolate framework glasses

Porous metal-organic frameworks have emerged to resolve important challenges of our modern society, such as CO2 sequestration. Zeolitic imidazolate frameworks (ZIFs) can undergo a glass transition to form ZIF glasses; they combine the liquid handling of classical glasses with the tremendous potential for gas separation applications of ZIFs. Using millimetre-sized ZIF-62 single crystals and centimetre-sized ZIF-62 glass, we demonstrate the scalability and processability of our materials. Further, following the evolution of gas penetration into ZIF crystals and ZIF glasses by infrared microimaging techniques, we determine the diffusion coefficients and changes to the pore architecture on the ångström scale. The evolution of the material on melting and processing is observed in situ on different length scales by using a microscope-coupled heating stage and analysed microstructurally by transmission electron microscopy. Pore collapse during glass processing is further tracked by changes in the volume and density of the glasses. Mass spectrometry was utilized to investigate the crystal-to-glass transition and thermal-processing ability. The controllable tuning of the pore diameter in ZIF glass may enable liquid-processable ZIF glass membranes for challenging gas separations.

Solution processing of crystalline porous material based membranes for CO2 separation

The carbon emission problem is a significant challenge in today's society, which has led to severe global climate issues. Membrane-based separation technology has gained considerable interest in CO2 separation due to its simplicity, environmental friendliness, and energy efficiency. Crystalline porous materials (CPMs), such as zeolites, metal-organic frameworks, covalent organic frameworks, hydrogen-bonded organic frameworks, and porous organic cages, hold great promise for advanced CO2 separation membranes because of their ordered and customizable pore structures. However, the preparation of defect-free and large-area crystalline porous material (CPM)-based membranes remains challenging, limiting their practical use in CO2 separation. To address this challenge, the solution-processing method, commonly employed in commercial polymer preparation, has been adapted for CPM membranes in recent years. Nanosheets, spheres, molecular cages, and even organic monomers, depending on the CPM type, are dissolved in suitable solvents and processed into continuous membranes for CO2 separation. This feature article provides an overview of the recent advancements in the solution processing of CPM membranes. It summarizes the differences among the solution-processing methods used for forming various CPM membranes, highlighting the key factors for achieving continuous membranes. The article also summarizes and discusses the CO2 separation performance of these membranes. Furthermore, it addresses the current issues and proposes future research directions in this field. Overall, this feature article aims to shed light on the development of solution-processing techniques for CPM membranes, facilitating their practical application in CO2 separation.

Accelerating Metal-Organic Framework Selection for Type III Porous Liquids by Synergizing Machine Learning and Molecular Simulation

MOF-based type III porous liquids, comprising porous MOFs dissolved in a liquid solvent, have attracted increasing attention in carbon capture. However, discovering appropriate MOFs to prepare porous liquids was still limited in experiments, wasting time and energy. In this study, we have used the density functional theory and molecular dynamics simulation methods to identify 4530 MOF candidates as the core database based on the idea of prohibiting the pore occupancy of porous liquids by the solvent, [DBU-PEG][NTf2] ionic liquid. Based on high-throughput molecular simulation, random forest machine learning models were first trained to predict the CO2 sorption and the CO2/N2 sorption selectivity of MOFs to screen the MOFs to prepare porous liquids. The feature importance was inferred based on Shapley Additive Explanations (SHAP) interpretation, and the ranking of the top 5 descriptors for sorption/selectivity trade-off (TSN) was gravimetric surface area (GSA) > porosity > density > metal fraction > pore size distribution (PSD, 3.5-4 Å). RICBEM was predicted to be one candidate for preparing porous liquid with CO2 sorption capacity of 20.87 mmol/g and CO2/N2 sorption selectivity of 16.75. The experimental results showed that the RICBEM-based porous liquid was successfully synthesized with CO2 sorption capacity of 2.21 mmol/g and CO2/N2 sorption selectivity of 63.2, the best carbon capture performance known to date. Such a screening method would advance the screening of cores and solvents for preparing type III porous liquids with different applications by addressing corresponding factors.

Self-supported MOF/cellulose-nanocrystals materials designed from ultrafiltration

Metal-organic-frameworks (MOFs) are promising materials for addressing critical issues such as petrochemical separation, water purification, energy storage and drug delivery. Their large-scale deployment, however, is hampered by a limited processability due to their powdery nature. Recently, the hybridization of MOFs with biopolymers has emerged as a greener, biocompatible strategy to shape MOFs composites into more processable membranes, films, and porous materials. In this work, cellulose nanocrystals (CNCs) were used in combination with ZIF-8 (a widely used synthetic zeolite) to produce hybrid composites through ultrafiltration. Results showed that small quantities of CNCs (1 to 20 CNC:ZIF-8 volume ratio) were sufficient to form a self-supported, dense deposit with high ZIF-8 loadings. Compared to classical MOF in situ growth strategies, this approach allowed the tuning of the composition of the final nanocomposite by controlling the nature and quantities of particles in the suspension. The fabrication of the deposit was strongly dependent on the physiochemical properties of the suspension, which were fully characterized with a set of complementary techniques, including in situ SAXS. This technique was employed to investigate the filtration process, which exhibited a homogeneous deposition of ZIF-8 particles mediated by CNC self-assembly. Finally, the available pore volume and integrity of the internal porosity of ZIF-8 were characterized by water porosimetry, demonstrating that the presence of CNCs did not alter the properties of the supported ZIF-8.

A roadmap to enhance gas permselectivity in metal-organic framework-based mixed-matrix membranes

Performing gas separation at high efficiency with minimum energy input and reduced carbon footprint is a major challenge. While several separation methods exist at various technology readiness levels, porous membrane-based separation is considered as a disruptive technology. To attain sustainability and required efficiency, different approaches of membrane design have been explored. However, the selectivity-permeation trade-off and membrane aging have restricted further advancement. In this regard, a new generation composite made of organic polymers and metal-organic framework (MOF) fillers shows substantial promise. Organic polymer matrix allows easy processibility, but it has poor permselectivity for gas molecules. Metal-organic frameworks are excellent sieving materials; however, they suffer from poor processibility issues. A combination of these two components makes an ideal sieving membrane, which can potentially outnumber the existing energy intensive distillation strategies. In this perspective, we have discussed key indices that regulate gas permselectivity by a careful selection of the existing literature. While the target gas flux and selectivity values have been a part of many previous reviews and articles, we have presented a concise discussion on the interface design of the MOF-polymer membrane, morphology, and orientation control of MOF fillers in the matrix. Following this, a future roadmap to overcome challenges related to MOF-polymer interfacial defects is outlined.

Direct Synthesis of Metal-Organic Framework Sols: Advances and Perspectives

The intrinsic lack of processability in the conventional nano/microcrystalline powder form of metal-organic frameworks (MOFs) greatly limits their application in various fields. Synthesis of MOFs with certain flowability make them promising for multitudinous applications. The direct synthesis strategy represents one of the simplest and efficient method for synthesizing solution processable MOF sols/suspensions, compared with other approaches, for instance, the post-synthesis surface modification, the direct dispersion of MOFs in hindered ionic liquids, as well as the calcination method toward a few MOFs with melting behavior. This article reviews the recent direct synthesis strategies of solution processable MOF sols and their typical applications in different fields. The direct synthesis strategies of MOF sols can be classified into two categories: particle size reduction strategy, and selective coordination strategy. The synthesis mechanism of different strategies and the factors affecting the formation of sols are summarized. The application of solution processable MOF sols in different fields are introduced, showing great application potentials. Furthermore, the challenges faced by the direct synthesis of MOF sols and the main methods to deal with the challenges are emphasized, and the future development trend is prospected.

Hierarchical Yolk-Shell Porous Ionic Liquids with Lower Viscosity for Efficient C3H6/C3H8 Adsorption and Separation

Yolk-shell metal-organic framework (YS-MOF) liquids are candidate materials in large-size species with high-efficiency separation, owing to their hierarchical porosity, faster mass transfer, better compatibility, and higher solution processability than MOF liquids with micropores. Nevertheless, facile synthesis strategies of yolk-shell porous ionic liquids (YSPILs) with regulations of size and morphology are an ongoing challenge. Herein, we propose a general strategy to construct YSPILs based on Z67@PDA with tunable core sizes and morphologies. Benefiting from the unique hierarchical yolk-shell structure, as-prepared YSPILs exhibit promise in C3H6/C3H8 capture and separation with the increased sizes of core in yolk-shell ZIF-67@PDA. Advanced YS-MOF liquids have improved the adsorption properties and increased our ability to tailor chemical composition and pore architecture. Impressively, the adsorption capacity of C3H6 and C3H8 of YSPILs exhibits an approximately 3-fold enhancement compared with that of the neat ILs, confirming that the accessible porosities are retained. Effective C3H6/C3H8 separation performance of YSPILs over PILs based on ZIF-67, revealing the hierarchical porosity of YS-Z67@PDA liquids, benefits larger-size gas separation. Therefore, we believe that this work can not only help us to rationally design novel hierarchically porous ionic liquids but also promote candidate applications in large-size species separation, catalysis, and nanoreactors.

Precise molecular sieving of ethylene from ethane using triptycene-derived submicroporous carbon membranes

Replacement or debottlenecking of the extremely energy-intensive cryogenic distillation technology for the separation of ethylene from ethane has been a long-standing challenge. Membrane technology could be a desirable alternative with potentially lower energy consumption. However, the current key obstacle for industrial implementation of membrane technology is the low mixed-gas selectivity of polymeric, inorganic or hybrid membrane materials, arising from the similar sizes of ethylene (3.75 Å) and ethane (3.85 Å). Here we report precise molecular sieving and plasticization-resistant carbon membranes made by pyrolysing a shape-persistent three-dimensional triptycene-based ladder polymer of intrinsic microporosity with unparalleled mixed-gas performance for ethylene/ethane separation, with a selectivity of ~100 at 10 bar feed pressure, and with long-term continuous stability for 30 days demonstrated. These submicroporous carbon membranes offer opportunities for membrane technology in a wide range of notoriously difficult separation applications in the petrochemical and natural gas industry.

Solid-solvent processing of ultrathin, highly loaded mixed-matrix membrane for gas separation

Mixed-matrix membranes (MMMs) that combine processable polymer with more permeable and selective filler have potential for molecular separation, but it remains difficult to control their interfacial compatibility and achieve ultrathin selective layers during processing, particularly at high filler loading. We present a solid-solvent processing strategy to fabricate an ultrathin MMM (thickness less than 100 nanometers) with filler loading up to 80 volume %. We used polymer as a solid solvent to dissolve metal salts to form an ultrathin precursor layer, which immobilizes the metal salt and regulates its conversion to a metal-organic framework (MOF) and provides adhesion to the MOF in the matrix. The resultant membrane exhibits fast gas-sieving properties, with hydrogen permeance and/or hydrogen-carbon dioxide selectivity one to two orders of magnitude higher than that of state-of-the-art membranes.

Design Principles for Using Amphiphilic Polymers To Create Microporous Water

Aqueous dispersions of microporous nanocrystals with dry, gas-accessible pores─referred to as "microporous water"─enable high densities of gas molecules to be transported through water. For many applications of microporous water, generalizable strategies are required to functionalize the external surface of microporous particles to control their dispersibility, stability, and interactions with other solution-phase components─including catalysts, proteins, and cells─while retaining as much of their internal pore volume as possible. Here, we establish design principles for the noncovalent surface functionalization of hydrophobic metal-organic frameworks with amphiphilic polymers that render the particles dispersible in water and enhance their hydrolytic stability. Specifically, we show that block co-polymers with persistence lengths that exceed the micropore aperture size of zeolitic imidazolate frameworks (ZIFs) can dramatically enhance ZIF particle dispersibility and stability while preserving porosity and >80% of the theoretical O2 carrying capacity. Moreover, enhancements in hydrolytic stability are greatest when the polymer can form strong bonds to exposed metal sites on the external particle surface. More broadly, our insights provide guidelines for controlling the interface between polymers and metal-organic framework particles in aqueous environments to augment the properties of microporous water.

SOD mineralized zeolitic imidazole framework-8 for the treatment of chemotherapy-related acute kidney injury

Acute kidney injury (AKI), a prevalent and fatal adverse event, seriously affects cancer patients undergoing chemotherapy. The most important pathological mechanism of AKI is oxidative stress from reactive oxygen species (ROS). Currently, ROS scavenging is a promising strategy to manage the risk of chemotherapy-induced AKI. Herein, we successfully synthesized SOD@ZIF-8 nanoparticles by biomimetic mineralization, which were taken up by cells and could improve cell viability by limiting oxidative stress damage, as found in in vitro studies. Moreover, SOD@ZIF-8 nanoparticles exhibit broad-spectrum antioxidant properties in addition to significant renal accumulation in AKI mice, preventing clinically related cisplatin-induced AKI in murine models. AKI alleviation in the model was validated by measuring blood serum, staining kidney tissue, and related biomarkers. SOD@ZIF-8 nanoparticle therapeutic efficiency exceeds NAC, a small molecular antioxidant functioning through free radical scavenging. The results suggest SOD@ZIF-8 nanoparticles as a potential therapeutic option for AKI and other ROS-related disorders.

Gram-scale synthesis of MIL-125 nanoparticles and their solution processability

Although metal-organic framework (MOF) photocatalysts have become ubiquitous, basic aspects of their photoredox mechanisms remain elusive. Nanosizing MOFs enables solution-state techniques to probe size-dependent properties and molecular reactivity, but few MOFs have been prepared as nanoparticles (nanoMOFs) with sufficiently small sizes. Here, we report a rapid reflux-based synthesis of the photoredox-active MOF Ti8O8(OH)4(terephthalate)6 (MIL-125) to achieve diameters below 30 nm in less than 2 hours. Whereas MOFs generally require ex situ analysis by solid-state techniques, sub-30 nm diameters ensure colloidal stability for weeks and minimal light scattering, permitting in situ analysis by solution-state methods. Optical absorption and photoluminescence spectra of free-standing colloids provide direct evidence that the photoredox chemistry of MIL-125 involves Ti3+ trapping and charge accumulation onto the Ti-oxo clusters. Solution-state potentiometry collected during the photochemical process also allows simultaneous measurement of MOF Fermi-level energies in situ. Finally, by leveraging the solution-processability of these nanoparticles, we demonstrate facile preparation of mixed-matrix membranes with high MOF loadings that retain the reversible photochromism. Taken together, these results demonstrate the feasibility of a rapid nanoMOF synthesis and fabrication of a photoactive membrane, and the fundamental insights they offer into heterogeneous photoredox chemistry.

Metal-Organic Framework Nanoparticles with Universal Dispersibility through Crown Ether Surface Coordination for Phase-Transfer Catalysis and Separation Membranes

Dispersing metal-organic framework (MOF) solids in stable colloids is crucial for their availability and processibility. Herein, we report a crown ether surface coordination approach for functionalizing the surface-exposed metal sites of MOF particles with amphiphilic carboxylated crown ether (CEC ). The surface-bound crown ethers significantly improve MOF solvation without compromising the accessible voids. We demonstrate that CEC -coated MOFs exhibit exceptional colloidal dispersibility and stability in 11 distinct solvents and six polymer matrices with a wide range of polarities. The MOF-CEC can be instantaneously suspended in immiscible two-phase solvents as an effective phase-transfer catalyst and can form various uniform membranes with enhanced adsorption and separation performance, which highlights the effectiveness of crown ether coating.

Revolutionizing Porous Liquids: Stabilization and Structural Engineering Achieved by a Surface Deposition Strategy

Facile approaches capable of constructing stable and structurally diverse porous liquids (PLs) that can deliver high-performance applications are a long-standing, captivating, and challenging research area that requires significant attention. Herein, a facile surface deposition strategy is demonstrated to afford diverse type III-PLs possessing ultra-stable dispersion, external structure modification, and enhanced performance in gas storage and transformation by leveraging the expeditious and uniform precipitation of selected metal salts. The Ag(I) species-modified zeolite nanosheets are deployed as the porous host to construct type III-PLs with ionic liquids (ILs) containing bromide anion , leading to stable dispersion driven by the formation of AgBr nanoparticles. The as-afforded type-III PLs display promising performance in CO2 capture/conversion and ethylene/ethane separation. Property and performance of the as-produced PLs can be tuned by the cation structure of the ILs, which can be harnessed to achieve polarity reversal of the porous host via ionic exchange. The surface deposition procedure can be further extended to produce PLs from Ba(II)-functionalized zeolite and ILs containing [SO4 ]2- anion driven by the formation of BaSO4 salts. The as-produced PLs are featured by well-maintained crystallinity of the porous host, good fluidity and stability, enhanced gas uptake capacity, and attractive performance in small gas molecule utilization.

Breathing porous liquids based on responsive metal-organic framework particles

Responsive metal-organic frameworks (MOFs) that display sigmoidal gas sorption isotherms triggered by discrete gas pressure-induced structural transformations are highly promising materials for energy related applications. However, their lack of transportability via continuous flow hinders their application in systems and designs that rely on liquid agents. We herein present examples of responsive liquid systems which exhibit a breathing behaviour and show step-shaped gas sorption isotherms, akin to the distinct oxygen saturation curve of haemoglobin in blood. Dispersions of flexible MOF nanocrystals in a size-excluded silicone oil form stable porous liquids exhibiting gated uptake for CO₂, propane and propylene, as characterized by sigmoidal gas sorption isotherms with distinct transition steps. In situ X-ray diffraction studies show that the sigmoidal gas sorption curve is caused by a narrow pore to large pore phase transformation of the flexible MOF nanocrystals, which respond to gas pressure despite being dispersed in silicone oil. Given the established flexible nature and tunability of a range of MOFs, these results herald the advent of breathing porous liquids whose sorption properties can be tuned rationally for a variety of technological applications.

Metal-organic framework glass composites

The melting phenomenon in metal-organic frameworks (MOFs) has been recognised as one of the fourth generation MOF paradigm behaviours. Molten MOFs have high processibility for producing mechanically robust glassy MOF macrostructures, and they also offer highly tunable interfacial characteristics when combined with other types of functional materials, such as crystalline MOFs, inorganic glass and metal halide perovskites. As a result, MOF glass composites have emerged as a family of functional materials with dynamic properties and hierarchical structural control. These nanocomposites allow for sophisticated materials science studies as well as the fabrication of next-generation separation, catalysis, optical, and biomedical devices. Here, we review the approaches for designing, fabricating, and characterising MOF glass composites. We determine the key application opportunities enabled by these composites and explore the remaining hurdles, such as improving thermal and chemical compatibility, regulating interfacial properties, and scalability.

Eliminating lattice defects in metal-organic framework molecular-sieving membranes

Metal-organic framework (MOF) membranes are energy-efficient candidates for molecular separations, but it remains a considerable challenge to eliminate defects at the atomic scale. The enlargement of pores due to defects reduces the molecular-sieving performance in separations and hampers the wider application of MOF membranes, especially for liquid separations, owing to insufficient stability. Here we report the elimination of lattice defects in MOF membranes based on a high-probability theoretical coordination strategy that creates sufficient chemical potential to overcome the steric hindrance that occurs when completely connecting ligands to metal clusters. Lattice defect elimination is observed by real-space high-resolution transmission electron microscopy and studied with a mathematical model and density functional theory calculations. This leads to a family of high-connectivity MOF membranes that possess ångström-sized lattice apertures that realize high and stable separation performance for gases, water desalination and an organic solvent azeotrope. Our strategy could enable a platform for the regulation of nanoconfined molecular transport in MOF pores.

Large-Area Fabrication of Ultrathin Metal-Organic Framework Membranes

Metal-organic framework (MOF)-based membranes, featuring potential molecular sieving effects and therefore capable of surmounting the ubiquitous trade-off between membrane selectivity and permeability, hold great promise for multitudinous chemical separations. Nevertheless, it remains highly challenging for the large-area fabrication of ultrathin MOF membranes with variable thickness, great homogeneity, and preferential orientation. Herein, this work reports the facile fabrication of ultrathin (down to 20 nm) NUS-8 membranes in large-area (>200 cm² ) yet with great homogeneity and texture along (00l) direction due to the superior solution processability of the as-synthesized NUS-8 nanosheets. The resultant NUS-8 membranes with good adhesion properties and certain flexibility exhibit excellent rejections (>98% for Mg²⁺ and Al³⁺ , and dyes with molecular weights larger than 585.5 g mol^-1 ) toward aqueous separation of various metal ions and dyes at modest permeance (1-3.2 L m^-2 h^-1 bar^-1 ) due to the well-aligned structures. Such separation performance outstands among polymetric membranes, thin-film composite membranes, mixed matrix membranes, and other MOF membranes reported in the literature. The separation mechanism is reasonably discussed based on the experimental and theoretical results. This study opens up novel perspectives for preparing ultrathin and large-area MOF membranes using the solution processability of MOFs.

Mixed Matrix Membranes with Surface Functionalized Metal-Organic Framework Sieves for Efficient Propylene/Propane Separation

Membrane technology, regarded as an environmentally friendly and sustainable approach, offers great potential to address the large energy penalty associated with the energy-intensive propylene/propane separation. Quest for molecular sieving membranes for this important separation is of tremendous interest. Here, a fluorinated metal-organic framework (MOF) material, known as KAUST-7 (KAUST: King Abdullah University of Science and Technology) with well-defined narrow 1D channels that can effectively discriminate propylene from propane based on a size-sieving mechanism, is successfully incorporated into a polyimide matrix to fabricate molecular sieving mixed matrix membranes (MMMs). Markedly, the surface functionalization of KAUST-7 nanoparticles with carbene moieties affords the requisite interfacial compatibility, with minimal nonselective defects at polymer-filler interfaces, for the fabrication of a molecular sieving MMM. The optimal membrane with a high MOF loading (up to 45 wt.%) displays a propylene permeability of ≈95 barrer and a mixed propylene/propane selectivity of ≈20, far exceeding the state-of-the-art upper bound limits. Moreover, the resultant membrane exhibits robust structural stability under practical conditions, including high pressures (up to 8 bar) and temperatures (up to 100 °C). The observed outstanding performance attests to the importance of surface engineering for the preparation and plausible deployment of high-performance MMMs for industrial applications.

A Bipyridyl Covalent Organic Framework with Coordinated Cu(I) for Membrane C3 H6 /C3 H8 Separation

Covalent organic frameworks (COFs) mixed matrix membranes (MMMs) combining individual attributes of COFs and polymers are promising for gas separation. However, applying COF MMMs for propylene/propane (C₃ H₆ /C₃ H₈ ) separation remains a big challenge due to COF inert pores and C₃ H₆ /C₃ H₈ similar molecular sizes. Herein, the designed synthesis of a Cu(I) coordinated COF for membrane C₃ H₆ /C₃ H₈ separation is reported. A platform COF is synthesized from 5,5'-diamino-2,2'-bipyridine and 2-hydroxybenzene-1,3,5-tricarbaldehyde. This COF possesses a porous 2D structure with high crystallinity. Cu(I) is coordinated to bipyridyl moieties in the COF framework, acting as recognizable sites for C₃ H₆ gas, as shown by the adsorption measurements. Cu(I) COF is blended with 6FDA-DAM polymer to yield MMMs. This COF MMM exhibits selective and permeable separation of C₃ H₆ from C₃ H₈ (C₃ H₆ permeability of 44.7 barrer, C₃ H₆ /C₃ H₈ selectivity of 28.1). The high porosity and Cu(I) species contribute to the great improvement of separation performance by virtue of 2.3-fold increase in permeability and 2.2-fold increase in selectivity compared to pure 6FDA-DAM. The superior performance to those of most relevant reported MMMs demonstrates that the Cu(I) coordinated COF is an excellent candidate material for C₃ H₆ separation membranes.

Advances of Electroactive Metal-Organic Frameworks

The preparation of electroactive metal-organic frameworks (MOFs) for applications of supercapacitors and batteries has received much attention and remarkable progress during the past few years. MOF-based materials including pristine MOFs, hybrid MOFs or MOF composites, and MOF derivatives are well designed by a combination of organic linkers (e.g., carboxylic acids, conjugated aromatic phenols/thiols, conjugated aromatic amines, and N-heterocyclic donors) and metal salts to construct predictable structures with appropriate properties. This review will focus on construction strategies of pristine MOFs and hybrid MOFs as anodes, cathodes, separators, and electrolytes in supercapacitors and batteries. Descriptions and discussions follow categories of electrochemical double-layer capacitors (EDLCs), pseudocapacitors (PSCs), and hybrid supercapacitors (HSCs) for supercapacitors. In contrast, Li-ion batteries (LIBs), Lithium-sulfur batteries (LSBs), Lithium-oxygen batteries (LOBs), Sodium-ion batteries (SIBs), Sodium-sulfur batteries (SSBs), Zinc-ion batteries (ZIBs), Zinc-air batteries (ZABs), Aluminum-sulfur batteries (ASBs), and others (e.g., LiSe, NiZn, H⁺ , alkaline, organic, and redox flow batteries) are categorized for batteries.

Post-Synthetic Surface Modification of Metal-Organic Frameworks and Their Potential Applications

Metal-organic frameworks (MOFs) are porous hybrid materials with countless potential applications. Most of these rely on their porous structure, tunable composition, and the possibility of incorporating and expanding their functions. Although functionalization of the inner surface of MOF crystals has received considerable attention in recent years, methods to functionalize selectively the outer crystal surface of MOFs are developed to a lesser extent, despite their importance. This article summarizes different types of post-synthetic modifications and possible applications of modified materials such as: catalysis, adsorption, drug delivery, mixed matrix membranes, and stabilization of porous liquids.

Bioinspired inhibition of aggregation in metal-organic frameworks (MOFs)

Different from traditional procedures of using solid stabilizers like polymers and surfactants, here we demonstrate that water, as a very "soft" matter, could function as a "spacer" to prevent the aggregation of metal-organic frameworks (MOFs) in aqueous dispersions. Our theoretical calculations reveal in case of an excess of positively charged metal nodes of MOFs, where water molecules are ligated to metal nodes that greatly enhance MOFs' solution dispersibility through electrostatic stabilization. This discovery has motivated us to develop a facile experimental approach for producing a category of "clean" MOF dispersions without foreign additives. Potential application has been demonstrated for the size fractionation of MOFs, which results in small-size MOFs (50-80 nm) characteristic of superior electrocatalytic oxygen evolution activities (256 mV at 10 mA cm^-2, Tafel slope of 49 mV dec^-1 and durability >30 h). This work would provide new clues for aqueous processing of MOFs for many emerging applications.

Challenges in Developing MOF-Based Membranes for Gas Separation

Metal-organic frameworks (MOFs) are promising candidates for membrane gas separation. MOF-based membranes include pure MOF membranes and MOF-based mixed matrix membranes (MMMs). This Perspective discusses the challenges for the next stage of the development of MOF-based membranes based on research conducted in the past decade. We focused on three major issues associated with pure MOF membranes. First, some MOF compounds have been overstudied, despite the availability of numerous MOFs. Second, gas adsorption and diffusion in MOFs are often independently investigated. The correlation between adsorption and diffusion has seldom been discussed. Third, we identify the importance of characterizing the gas distribution in MOFs to understand the structure-property relationships for gas adsorption and diffusion in MOF membranes. For MOF-based MMMs, engineering the MOF-polymer interface is essential for achieving the desired separation performance. Various approaches to modify the MOF surface or polymer molecular structure have been proposed to improve the MOF-polymer interface. Herein, we present defect engineering as a facile and efficient approach for engineering the MOF-polymer interfacial morphology and its extended application for various gas separations.

Chemically Bonded Plasmonic Triazole-Functionalized Au/Zeolitic Imidazole Framework (ZIF-67) for Enhanced CO2 Photoreduction

The design of functionalized metallic nanoparticles is considered an emerging technique to ensure the interaction between metal and semiconductor material. In the literature, this interface interaction is mainly governed by electrostatic or van der Waals forces, limiting the injection of electrons under light irradiation. To enhance the transfer of electrons between two compounds, close contact or chemical bonding at the interface is required. Herein, a new approach was reported for the synthesis of chemically bonded plasmonic Au NPs/ZIF-67 nanocomposites. The structure of ZIF-67 was grown on the surface of functionalized plasmonic Au NPs using 1H-1,2,4-triazole-3-thiol as the capping agent, which acted as both stabilizer of Au nanoparticles and a molecular linker for ZIF-67 formation. As a result, the synthesized material exhibited outstanding photocatalytic CO₂ reduction with a methanol production rate of 2.70 mmol h^-1  g^-1 _cat under sunlight irradiation. This work emphasizes that the diligent use of capping agents, with suitable functional groups, could facilitate the formation of intimate heterostructure for enhanced photocatalytic CO₂ reduction.

Self-healing mixed matrix membranes containing metal-organic frameworks

Mixed-matrix membranes (MMMs) provide a means to formulate metal-organic frameworks (MOFs) into processable films that can help to advance their use in various applications. Conventional MMMs are inherently susceptible to craze or tear upon exposure to impact, cutting, bending, or stretching, which can limit their intended service life and usage. Herein, a simple, efficient, and scalable in situ fabrication approach was used to prepare self-healing MMMs containing Zr(iv)-based MOFs. The ability of these MMMs to self-heal at room temperature is based on the reversible hydrolysis of boronic-ester conjugates. Thiol-ene 'photo-click' polymerization yielded robust MMMs with ∼30 wt% MOF loading and mechanical strength that varied based on the size of MOF particles. The MMMs could undergo repeated self-healing with good retention of mechanical strength. In addition, the MMMs were catalytically active toward the degradation of the chemical warfare agent (CWA) simulant dimethyl-4-nitrophenyl phosphate (DMNP) with no change in activity after two damage-healing cycles.

Phototriggered Desorption of Hydrogen, Ethylene, and Carbon Monoxide from a Cu(I)-Modified Covalent Organic Framework

Materials that are capable of adsorbing and desorbing gases near ambient conditions are highly sought after for many applications in gas storage and separations. While the physisorption of typical gases to high surface area covalent organic frameworks (COFs) occurs through relatively weak intermolecular forces, the tunability of framework materials makes them promising candidates for tailoring gas sorption enthalpies. The incorporation of open Cu(I) sites into framework materials is a proven strategy to increase gas uptake closer to ambient conditions for gases that are capable of π-back-bonding with Cu. Here, we report the synthesis of a Cu(I)-loaded COF with subnanometer pores and a three-dimensional network morphology, namely Cu(I)-COF-301. This study focused on the sorption mechanisms of hydrogen, ethylene, and carbon monoxide with this material under ultrahigh vacuum using temperature-programmed desorption and Kissinger analyses of variable ramp rate measurements. All three gases desorb near or above room temperature under these conditions, with activation energies of desorption (E _des) calculated as approximately 29, 57, and 68 kJ/mol, for hydrogen, ethylene, and carbon monoxide, respectively. Despite these strong Cu(I)-gas interactions, this work demonstrated the ability to desorb each gas on-demand below its normal desorption temperature upon irradiation with ultraviolet (UV) light. While thermal imaging experiments indicate that bulk photothermal heating of the COF accounts for some of the photodriven desorption, density functional theory calculations reveal that binding enthalpies are systematically lowered in the COF-hydrogen matrix excited state initiated by UV irradiation, further contributing to gas desorption. This work represents a step toward the development of more practical ambient temperature storage and efficient regeneration of sorbents for applications with hydrogen and π-accepting gases through the use of external photostimuli.

Advances in metal-organic framework-based membranes

Membrane-based separations have garnered considerable attention owing to their high energy efficiency, low capital cost, small carbon footprint, and continuous operation mode. As a class of highly porous crystalline materials with well-defined pore systems and rich chemical functionalities, metal-organic frameworks (MOFs) have demonstrated great potential as promising membrane materials over the past few years. Different types of MOF-based membranes, including polycrystalline membranes, mixed matrix membranes (MMMs), and nanosheet-based membranes, have been developed for diversified applications with remarkable separation performances. In this comprehensive review, we first discuss the general classification of membranes and outline the historical development of MOF-based membranes. Subsequently, particular attention is devoted to design strategies for MOF-based membranes, along with detailed discussions on the latest advances on these membranes for various gas and liquid separation processes. Finally, challenges and future opportunities for the industrial implementation of these membranes are identified and outlined with the intent of providing insightful guidance on the design and fabrication of high-performance membranes in the future.