Hidden diversity of vacancy networks in Prussian blue analogues

Prussian Blue Analogue Glasses for Photoinduced CO2 Conversion

Crystal-to-glass transformation is a powerful approach to modulating the chemical and physical properties of crystals. Here we demonstrate that the glass transformation of cobalt hexacyanoferrate crystals, one of the Prussian blue analogues, increased the concentration of open metal sites and altered the electronic state while maintaining coordination geometries and short-range ordering in the structure. The compositional and structural changes were characterized by X-ray absorption fine structure, energy dispersive X-ray spectroscopy, and X-ray total scattering. The changes contribute to the flat band potential of the glass becoming closer to the redox potential of CO2 reduction. The valence band energy of the glass also shifts, resulting in lower band gap energy. Both the increased open metal sites and the optimal electronic structure upon vitrification enhance photocatalytic activity toward CO2-to-CO conversions (9.9 μmol h-1 CO production) and selectivity (72.4%) in comparison with the crystalline counterpart (3.9 μmol h-1 and 42.8%).

Local Structure and Dynamics in MPt(CN)6 Prussian Blue Analogues

We use a combination of X-ray pair distribution function (PDF) measurements, lattice dynamical calculations, and ab initio density functional theory (DFT) calculations to study the local structure and dynamics in various MPt(CN)6 Prussian blue analogues. In order to link directly the local distortions captured by the PDF with the lattice dynamics of this family, we develop and apply a new "interaction-space" PDF refinement approach. This approach yields effective harmonic force constants, from which the (experiment-derived) low-energy phonon dispersion relations can be approximated. Calculation of the corresponding Grüneisen parameters allows us to identify the key modes responsible for negative thermal expansion (NTE) as arising from correlated tilts of coordination octahedra. We compare our results against the phonon dispersion relations determined using DFT calculations, which identify the same NTE mechanism.

Rubik's cube PBA frameworks for optimizing the electrochemical performance in alkali metal-ion batteries

PBA frameworks have stood out among metal-organic frameworks because of their easy preparation, excellent stability, porous structures, and rich redox properties. Unfortunately, their non-ideal conductivity and significant volume expansion during cycling prevent more widespread application in alkali-metal-ion (Li+, Na+, and K+) batteries. By changing the type and molar ratio of metal ions, Rubik's PBA frameworks with infinite structural variations were obtained in this study, just like the Rubik's cube undergoes infinite changes during the rotation. X-ray adsorption fine structure measurements have documented the existence and determined the coordination environment of the metal ions in the Rubik's PBA framework. Benefiting from the more stable Rubik's cube structures with diverse composition, enhanced conductivity, and greater adsorption capacity, the obtained Rubik's cubes CoM-PBA anodes, especially CoZn-PBA deliver the enhanced cycling and rate performance in all the alkali-metal-ion batteries. The findings are supported by density functional theory calculations. Ex-situ X-ray photoelectron spectroscopy, and in-situ X-ray diffraction measurements were undertaken to explore the storage mechanism of CoZn-PBA anodes. Our results further demonstrate that the Rubik's cube PBA framework-based materials could be widely applied in the field of alkali-metal-ion batteries.

Toward Ultrahigh Rate and Cycling Performance of Cathode Materials of Sodium Ion Battery by Introducing a Bicontinuous Porous Structure

The emerging sodium-ion batteries (SIBs) are one of the most promising candidates expected to complement lithium-ion batteries and diversify the battery market. However, the exploitation of cathode materials with high-rate performance and long-cycle stability for SIBs has remained one of the major challenges. To this end, an efficient approach to enhance rate and cycling performance by introducing an ordered bicontinuous porous structure into cathode materials of SIBs is demonstrated. Prussian blue analogues (PBAs) are selected because they are recognized as a type of most promising SIB cathode materials. Thanks to the presence of 3D continuous channels enabling fast Na+ ions diffusion as well as the intrinsic mechanical stability of bicontinuous architecture, the resultant PBAs exhibit excellent rate capability (80 mAh g-1 at 2.5 A g-1) and ultralong cycling life (>3000 circulations at 0.5 A g-1), reaching the top performance of the reported PBA-based cathode materials. This study opens a new avenue for boosting sluggish ion diffusion kinetics in electrodes of rechargeable batteries and also provides a new paradigm for solving the dilemma that electrodes' failure due to high-stress concentration upon ion storage.

Percolation-Induced Ferrimagnetism from Vacancy Order in [Gua]Mn1-xFe2x/3(HCOO)3 Hybrid Perovskites

We report the magnetic behavior of the hybrid perovskites [Gua]Mn1-xFe2x/3□x/3(HCOO)3 (0 ≤ x ≤ 0.88), showing that vacancy ordering drives bulk ferrimagnetism for x > 0.6. The behavior is rationalized in terms of a simple microscopic model of percolation-induced ferrimagnetism. Monte Carlo simulations driven by this model reproduce the experimental dependence of magnetic susceptibility on x and show that, at intermediate compositions, domains of short-range vacancy order lead to the emergence of local magnetization. Our results open up a new avenue for the design of multiferroic hybrid perovskites.

Scaling and merging macromolecular diffuse scattering with mdx2

Diffuse scattering is a promising method to gain additional insight into protein dynamics from macromolecular crystallography experiments. Bragg intensities yield the average electron density, while the diffuse scattering can be processed to obtain a three-dimensional reciprocal-space map that is further analyzed to determine correlated motion. To make diffuse scattering techniques more accessible, software for data processing called mdx2 has been created that is both convenient to use and simple to extend and modify. mdx2 is written in Python, and it interfaces with DIALS to implement self-contained data-reduction workflows. Data are stored in NeXus format for software interchange and convenient visualization. mdx2 can be run on the command line or imported as a package, for instance to encapsulate a complete workflow in a Jupyter notebook for reproducible computing and education. Here, mdx2 version 1.0 is described, a new release incorporating state-of-the-art techniques for data reduction. The implementation of a complete multi-crystal scaling and merging workflow is described, and the methods are tested using a high-redundancy data set from cubic insulin. It is shown that redundancy can be leveraged during scaling to correct systematic errors and obtain accurate and reproducible measurements of weak diffuse signals.

Enhancing Kinetics in Sodium Super Ion Conductor Na3MnTi(PO4)3 through Microbe-Assisted and Structural Optimization

Sodium (Na) super ion conductor (NASICON) structure Na3MnTi(PO4)3 (NMTP) is considered a promising cathode for sodium-ion batteries due to its reversible three-electron reaction. However, the inferior electronic conductivity and sluggish reaction kinetics limit its practical applications. Herein, we successfully constructed a three-dimensional cross-linked porous architecture NMTP material (AsN@NMTP/C) by a natural microbe of Aspergillus niger (AsN), and the structure of different NMTP cathodes was optimized by adjusting different transition metal Mn/Ti ratios. Both approaches effectively altered the three-dimensional NMTP structure, not only improving electronic conductivity and controlling Na+ diffusion pathways but also enhancing the electrochemical kinetics of the material. The resultant AsN@NMTP/C-650, sintered at 650 °C, exhibits better electrochemical performance with higher reversible three-electron reactions corresponding to the voltage platforms of Ti4+/3+, Mn3+/2+, and Mn4+/3+ around 2.1, 3.6, and 4.1 V (vs Na+/Na), respectively. The capacity retention rate is up to 89.3% after 1000 cycles at a 2C rate. Moreover, a series of results confirms that the Na3.4Mn1.2Ti0.8(PO4)3 cathode has the most excellent electrochemical performance when the Mn/Ti ratio is 1.2/0.8, with a high capacity of 96.59 mAh g-1 and 97.1% capacity retention after 500 cycles.

Dual-functional mediators of high-entropy Prussian blue analogues for lithiophilicity and sulfiphilicity in Li-S batteries

Lithium-sulfur (Li-S) batteries are considered promising next-generation energy storage systems due to their high energy density (2600 W h kg-1) and cost-effectiveness. However, the shuttle effect of lithium polysulfides in sulfur cathodes and uncontrollable Li dendrite growth in Li metal anodes significantly impede the practical application of Li-S batteries. In this study, we address these challenges by employing a high-entropy Prussian blue analogue Mn0.4Co0.4Ni0.4Cu0.4Zn0.4[Fe(CN)6]2 (HE-PBA) composite containing multiple metal ions as a dual-functional mediator for Li-S batteries. Specifically, the HE-PBA composite provides abundant metal active sites that efficiently chemisorb lithium polysulfides (LiPSs) to facilitate fast redox conversion kinetics of LiPSs. In Li metal anodes, the exceptional lithiophilicity of the HE-PBA ensures a homogeneous Li ion flux, resulting in uniform Li deposition while mitigating the growth of Li dendrites. As a result, our work demonstrates outstanding long-term cycling performance with a decay rate of only 0.05% per cycle over 1000 cycles at 2.0 C. The HE-PBA@Cu/Li anode maintains a stable overpotential even after 600 h at 0.5 mA cm-2 under the total areal capacity of 1.0 mA h cm-2. This study showcases the application potential of the HE-PBA in Li-S batteries and encourages further exploration of prospective high-entropy materials used to engineer next-generation batteries.

Cyanide-Isolated Cobalt Catalyst for Ultraefficient Advanced Oxidation Treatment

Catalyst design with a "Co-N-C" structure at the atomic level has shown great interest for peroxymonosulfate (PMS) activation toward advanced oxidation water treatment. Here, we present an innovative way of producing cobalt hexacyanocobaltate (Co-HCC) with an abundance of atomically isolated CoII-NC sites at the outer surface. This material allows ultraefficient PMS activation to generate plenty of sulfate and hydroxyl radicals, with a turnover frequency much higher than those of most cobalt-based catalysts reported so far and even the homogeneous catalysis by Co2+ ions. We gained fundamental insights on its unprecedently high catalytic performance based on experimental results and computational study. Then, we controlled the growth of Co-HCC on a ceramic membrane to form a confined oxidation environment that utilizes the extended surface area and maximal exposure of short-lived radicals for a fast removal of organic pollutants that enter the pores. As a result, this catalytic membrane achieves complete disruption of micropollutants under a water flux up to 10,000 LMH (merely 0.2 s retention time) and further >90% mineralization of organic pollutants in complex industrial wastewater matrices (<100 s retention time), together with the merits of operational simplicity and great longevity (2 weeks continuous run). Our study elicits a new milestone in "Co-N-C" catalyst structure design for PMS activation and highlights the great interest of producing catalytic membranes for a confined treatment of organic pollutants from partial oxidation to complete mineralization as a new benchmark.

Cooperative Effects Drive Water Oxidation Catalysis in Cobalt Electrocatalysts through the Destabilization of Intermediates

A barrier to understanding the factors driving catalysis in the oxygen evolution reaction (OER) is understanding multiple overlapping redox transitions in the OER catalysts. The complexity of these transitions obscure the relationship between the coverage of adsorbates and OER kinetics, leading to an experimental challenge in measuring activity descriptors, such as binding energies, as well as adsorbate interactions, which may destabilize intermediates and modulate their binding energies. Herein, we utilize a newly designed optical spectroelectrochemistry system to measure these phenomena in order to contrast the behavior of two electrocatalysts, cobalt oxyhydroxide (CoOOH) and cobalt-iron hexacyanoferrate (cobalt-iron Prussian blue, CoFe-PB). Three distinct optical spectra are observed in each catalyst, corresponding to three separate redox transitions, the last of which we show to be active for the OER using time-resolved spectroscopy and electrochemical mass spectroscopy. By combining predictions from density functional theory with parameters obtained from electroadsorption isotherms, we demonstrate that a destabilization of catalytic intermediates occurs with increasing coverage. In CoOOH, a strong (∼0.34 eV/monolayer) destabilization of a strongly bound catalytic intermediate is observed, leading to a potential offset between the accumulation of the intermediate and measurable O2 evolution. We contrast these data to CoFe-PB, where catalytic intermediate generation and O2 evolution onset coincide due to weaker binding and destabilization (∼0.19 eV/monolayer). By considering a correlation between activation energy and binding strength, we suggest that such adsorbate driven destabilization may account for a significant fraction of the observed OER catalytic activity in both materials. Finally, we disentangle the effects of adsorbate interactions on state coverages and kinetics to show how adsorbate interactions determine the observed Tafel slopes. Crucially, the case of CoFe-PB shows that, even where interactions are weaker, adsorption remains non-Nernstian, which strongly influences the observed Tafel slope.

Interior-Confined Vacancy in Potassium Manganese Hexacyanoferrate for Ultra-Stable Potassium-Ion Batteries

Metal hexacyanoferrates (HCFs) are viewed as promising cathode materials for potassium-ion batteries (PIBs) because of their high theoretical capacities and redox potentials. However, the development of an HCF cathode with high cycling stability and voltage retention is still impeded by the unavoidable Fe(CN)6 vacancies (VFeCN) and H2O in the materials. Here, a repair method is proposed that significantly reduces the VFeCN content in potassium manganese hexacyanoferrate (KMHCF) enabled by the reducibility of sodium citrate and removal of ligand H2O at high temperature (KMHCF-H). The KMHCF-H obtained at 90 °C contains only 2% VFeCN, and the VFeCN is concentrated in the lattice interior. Such an integrated Fe-CN-Mn surface structure of the KMHCF-H cathode with repaired surface VFeCN allows preferential decomposition of potassium bis(fluorosulfonyl)imide (KFSI) in the electrolyte, which constitutes a dense anion-dominated cathode electrolyte interphase (CEI) , inhibiting effectively Mn dissolution into the electrolyte. Consequently, the KMHCF-H cathode exhibits excellent cycling performance for both half-cell (95.2 % at 0.2 Ag-1 after 2000 cycles) and full-cell (99.4 % at 0.1 Ag-1 after 200 cycles). This thermal repair method enables scalable preparation of KMHCF with a low content of vacancies, holding substantial promise for practical applications of PIBs.

How Reproducible is the Synthesis of Zr-Porphyrin Metal-Organic Frameworks? An Interlaboratory Study

Metal-organic frameworks (MOFs) are a rapidly growing class of materials that offer great promise in various applications. However, the synthesis remains challenging: for example, a range of crystal structures can often be accessed from the same building blocks, which complicates the phase selectivity. Likewise, the high sensitivity to slight changes in synthesis conditions may cause reproducibility issues. This is crucial, as it hampers the research and commercialization of affected MOFs. Here, it presents the first-ever interlaboratory study of the synthetic reproducibility of two Zr-porphyrin MOFs, PCN-222 and PCN-224, to investigate the scope of this problem. For PCN-222, only one sample out of ten was phase pure and of the correct symmetry, while for PCN-224, three are phase pure, although none of these show the spatial linker order characteristic of PCN-224. Instead, these samples resemble dPCN-224 (disordered PCN-224), which has recently been reported. The variability in thermal behavior, defect content, and surface area of the synthesised samples are also studied. The results have important ramifications for field of metal-organic frameworks and their crystallization, by highlighting the synthetic challenges associated with a multi-variable synthesis space and flat energy landscapes characteristic of MOFs.

In Situ Exfoliation Growth Strategy Realizing Controlled Synthesis of 3D to 2D MOF Materials as High-Performance Electrochemical Biosensors

Two-dimensional (2D) metal-organic framework (MOF) nanosheets with large surface area, ultrathin thickness, and highly accessible active sites have attracted great research attention. Developing efficient approaches to realize the controllable synthesis of well-defined 2D MOFs with a specific composition and morphology is critical. However, it is still a significant challenge to construct thin and uniform 2D MOF nanosheets and resolve the reagglomeration as well as poor stability of target 2D MOF products. Here, an "in situ exfoliation growth" strategy is proposed, where a one-step synthetic process can realize the successful fabrication of PBA/MIL-53(NiFe)/NF nanosheets on the surface of nickel foam (NF) via in situ conversion and exfoliation growth strategies. The PBA/MIL-53(NiFe)/NF nanosheets combine the individual advantages of MOFs, Prussian blue analogues (PBAs), and 2D materials. As expected, the resulting PBA/MIL-53(NiFe)/NF as a glucose electrode exhibits an extremely high sensitivity of 25.74 mA mM-1 cm-2 in a very wide concentration range of 180 nM to 4.8 μM. The present exciting work provides a simple and effective strategy for the construction of high-performance nonenzymatic glucose electrochemical biosensors.

Defect-Free Prussian Blue Analogue as Zero-Strain Cathode Material for High-Energy-Density Potassium-Ion Batteries

Prussian blue analogues (PBAs) have been widely studied as cathodes for potassium-ion batteries (PIBs) due to their three-dimensional framework structure and easily adjustable composition. However, the phase transition behavior and [Fe(CN)6]4- anionic defects severely deteriorate electrochemical performances. Herein, we propose a defect-free potassium iron manganese hexacyanoferrate (K1.47Fe0.5Mn0.5[Fe(CN)6]·1.26H2O, KFMHCF-1/2) as the cathode material for PIBs. The Fe-Mn binary synergistic and defect-free effects can inhibit the cell volume change and octahedral slip during the K-ion insertion/extraction process, so that the phase transformation behavior (monoclinic ↔ cubic) is effectively inhibited, achieving a zero-strain solid solution mechanism employing Fe and Mn as dual active-sites. Thus, KFMHCF-1/2 contributes the highest initial capacity of 155.3 mAh·g-1 with an energy density of 599.5 Wh·kg-1 at 10 mA·g-1 among the reported PBA cathodes, superior rate capability, and cyclic stability over 450 cycles. The assembled K-ion full battery using K deposited on graphite (K@G) as anode also delivers high reversible specific capacity of 131.1 mAh·g-1 at 20 mA·g-1 and ultralong lifespans over 1000 cycles at 50 mA·g-1 with the lowest capacity decay rate of 0.044% per cycle. This work will promote the rapid application of high-energy-density PIBs.

The pressure response of Jahn-Teller-distorted Prussian blue analogues

Jahn-Teller (JT) distorted CuII-containing compounds often display interesting structural and functional behaviour upon compression. We use high-pressure X-ray and neutron diffraction to investigate four JT-distorted Prussian blue analogues: Cu[Co(CN)6]0.67, CuPt(CN)6, and ACuCo(CN)6 (A = Rb, Cs), where the first two were studied in both their hydrated and dehydrated forms. All compounds are less compressible than the JT-inactive MnII-based counterparts, indicating a coupling between the electronic and mechanical properties. The effect is particularly strong for Cu[Co(CN)6]0.67, where the local JT distortions are uncorrelated (so-called orbital disorder). This sample amorphises at 0.5 GPa when dehydrated. CuPt(CN)6 behaves similarly to the MnII-analogues, with phase transitions at around 1 GPa and low sensitivity to water. For ACuCo(CN)6, the JT distortions reduce the propensity for phase transitions, although RbCuCo(CN)6 transitions to a new phase (P2/m) around 3 GPa. Our results have a bearing on both the topical Prussian blue analogues and the wider field of flexible frameworks.

Progress on Transition Metal Ions Dissolution Suppression Strategies in Prussian Blue Analogs for Aqueous Sodium-/Potassium-Ion Batteries

Aqueous sodium-ion batteries (ASIBs) and aqueous potassium-ion batteries (APIBs) present significant potential for large-scale energy storage due to their cost-effectiveness, safety, and environmental compatibility. Nonetheless, the intricate energy storage mechanisms in aqueous electrolytes place stringent requirements on the host materials. Prussian blue analogs (PBAs), with their open three-dimensional framework and facile synthesis, stand out as leading candidates for aqueous energy storage. However, PBAs possess a swift capacity fade and limited cycle longevity, for their structural integrity is compromised by the pronounced dissolution of transition metal (TM) ions in the aqueous milieu. This manuscript provides an exhaustive review of the recent advancements concerning PBAs in ASIBs and APIBs. The dissolution mechanisms of TM ions in PBAs, informed by their structural attributes and redox processes, are thoroughly examined. Moreover, this study delves into innovative design tactics to alleviate the dissolution issue of TM ions. In conclusion, the paper consolidates various strategies for suppressing the dissolution of TM ions in PBAs and posits avenues for prospective exploration of high-safety aqueous sodium-/potassium-ion batteries.

Hierarchical MOFs with Good Catalytic Properties and Structural Stability in Oxygen-Rich and High-Temperature Environments

Metal-organic framework materials are ideal materials characterized by open frameworks, adjustable components, and high catalytic activity. They are extensively utilized for catalysis. Due to decomposition and structural collapse under high temperatures and an oxygen-rich environment, the potential of thermal catalysis is greatly limited. In this research, Co-rich hollow spheres (Co-HSs) with a gradient composition are designed and synthesized to investigate their thermal catalytic properties in the ammonium perchlorate（AP）system. The results demonstrate that Co-HSs@AP exhibits good thermal catalytic activity and a high-temperature decomposition of 292.5 °C, which is 121.6 °C lower than pure AP. The hierarchical structure confers structural stability during the thermal decomposition process. Thermogravimetry-infrared indicates that the inclusion of Co-HSs successfully boosts the level of reactive oxygen species and achieves thorough oxidation of NH3 . Based on the above phenomenon, macro dynamics calculations are carried out. The results show that Co-HSs can promote the circulation of lattice oxygen and reactive oxygen species and the multidimensional diffusion of NH3 in an oxygen-rich environment. This material has significant potential for application in the fields of thermal catalysis and ammonia oxidation.

All-in-One Zinc-Doped Prussian Blue Nanozyme for Efficient Capture, Separation, and Detection of Copper Ion (Cu2+ ) in Complicated Matrixes

Copper is a vital micronutrient for lives and an important ingredient for bactericides and fungicides. Given its indispensable biological and agricultural roles, there is an urgent need to develop simple, affordable, and reliable methods for detecting copper in complicated matrixes, particularly in underdeveloped regions where costly standardized instruments and sample dilution procedures hinder progress. The findings that zinc-doped Prussian blue nanoparticle (ZnPB NP) exhibits exceptional efficiency in capturing and isolating copper ions, and accelerates the generation of dissolved oxygen in a solution of H2 O2 with remarkable sensitivity and selectivity, the signal of which displays a positive correlation with the copper level due to the copper-enhanced catalase-like activity of ZnPB NP, are presented. Consequently, the ZnPB NP serves as an all-in-one sensor for copper ion. The credibility of the method for copper assays in human urine and farmland soil is shown by comparing it to the standard instrumentation, yielding a coefficient of correlation (R2 = 0.9890), but the cost is dramatically reduced. This ZnPB nanozyme represents a first-generation probe for copper ion in complicated matrixes, laying the groundwork for the future development of a practical copper sensor that can be applied in resource-constrained environments.

Effect of the Interaction between Transition Metal Redox Center and Cyanide Ligand on Structural Evolution in Prussian White Cathodes

Transition metal (TM) based Prussian whites, comprising a cyanide anion ((C≡N)-) and TM cations in an alternative manner, have been widely adopted as cathode materials for rechargeable batteries. Prussian whites are characterized by the TM electronic states that exclusively adopt low spin (LS) toward the C atom and high spin (HS) toward the N atom through the hybridized covalent bonding in the TM─C≡N─TM unit with the average oxidation states of the TM ions being 2+, considerably affecting the phase transition behavior upon the release and storage of carrier ions; however, there have been only a few studies on their associated features. Herein, Prussian whites with different HS TM ions were synthesized via coprecipitation and the phase transition behavior controlled by the π electron interaction between the cyanide anions and TM ions during battery operations was investigated. In situ X-ray characterizations reveal that the combined effect of π backdonation in the LS Fe-C unit and π donation in the HS TM-N unit effectively controls the bond length of the TM─C≡N─TM building unit, thus markedly influencing the lattice volume of a series of Prussian white cathodes during the charge/discharge process. This study presents a comprehensive understanding of the structure-property relationship of the Prussian white cathodes involving π electron interactions during battery operations.

Unravelling the components of diffuse scattering using deep learning

Many technologically important material properties are underpinned by disorder and short-range structural correlations; therefore, elucidating structure-property relationships in functional materials requires understanding both the average and the local structures. The latter information is contained within diffuse scattering but is challenging to exploit, particularly in single-crystal systems. Separation of the diffuse scattering into its constituent components can greatly simplify analysis and allows for quantitative parameters describing the disorder to be extracted directly. Here, a deep-learning method, DSFU-Net, is presented based on the Pix2Pix generative adversarial network, which takes a plane of diffuse scattering as input and factorizes it into the contributions from the molecular form factor and the chemical short-range order. DSFU-Net was trained on 198 421 samples of simulated diffuse scattering data and performed extremely well on the unseen simulated validation dataset in this work. On a real experimental example, DSFU-Net successfully reproduced the two components with a quality sufficient to distinguish between similar structural models based on the form factor and to refine short-range-order parameters, achieving values comparable to other established methods. This new approach could streamline the analysis of diffuse scattering as it requires minimal prior knowledge of the system, allows access to both components in seconds and is able to compensate for small regions with missing data. DSFU-Net is freely available for use and represents a first step towards an automated workflow for the analysis of single-crystal diffuse scattering.

Boosting the interfacial dynamics and thermodynamics in polyanion cathode by carbon dots for ultrafast-charging sodium ion batteries

Ultrafast-charging is the focus of next-generation rechargeable batteries for widespread economic success by reducing the time cost. However, the poor ion diffusion rate, intrinsic electronic conductivity and structural stability of cathode materials seriously hinder the development of ultrafast-charging technology. To overcome these challenges, an interfacial dynamics and thermodynamics synergistic strategy is proposed to synchronously enhance the fast-charging capability and structural stability of polyanion cathode materials. As a case study, a Na3V2(PO4)3 composite (NVP/NSC) is successfully obtained by introducing an interface layer derived from N/S co-doped carbon dots. Density functional theory calculations validate that the interfacial bonding effect of V-N/S-C significantly reduces the Na+ transport energy barrier. D-band center theory analysis confirms the downward shift of the V d-band center enhances the strength of the V-O bond and considerably inhibits irreversible phase transformation. Benefitting from this interfacial synergistic strategy, NVP/NSC achieves a high capability and excellent cycling stability with a surprisingly low carbon content (2.23%) at an extremely high rate of 100C for 10 000 cycles (87.2 mA h g-1, 0.0028% capacity decay per cycle). Furthermore, a superior performance at 5C (115.3 mA h g-1, 92.1% capacity retention after 800 cycles) is exhibited by the NVP/NSC‖HC full cell. These findings provide timely new insights for the systematic design of ultrafast-charging cathode materials.

Cation Adaptive Structures Based on Manganese Cyanide Prussian Blue Analogues: Application of Powder Diffraction Data to Solve Complex, Unprecedented Stoichiometries and New Structure Types

A Mn(II) salt and A+ CN- under anaerobic conditions react to form 2-D and 3-D extended structured compounds of Am MnII n (CN)m+2n stoichiometry. Here, the creation and characterization of this large family of compounds, for example AMnII 3 (CN)7 , A2 MnII 3 (CN)8 , A2 MnII 5 (CN)12 , A3 MnII 5 (CN)13 , and A2 MnII [MnII (CN)6 ], where A represents alkali and tetraalkylammonium cations, is reviewed. Cs2 MnII [MnII (CN)6 ] has the typical Prussian blue face centered cubic unit cell. However, the other alkali salts are monoclinic or rhombohedral. This is in accord with smaller alkali cation radii creating void space that is minimized by increasing the van der Waals stabilization energy by reducing ∠Mn-N≡C, which, strengthens the magnetic coupling and increases the magnetic ordering temperatures. This is attributed to the non-rigidity of the framework structure due the significant ionic character associated with the high-spin MnII sites. For larger tetraalkylammonium cations, the high-spin Mn sites lack sufficient electrostatic A+ ⋅⋅⋅NC stabilization and form unexpected 4- and 5-coordinated Mn sites within a flexible, extended framework around the cation; hence, the size, shape, and charge of the cation dictate the unprecedented stoichio-metry and unpredictable cation adaptive structures. Antiferromagnetic coupling between adjacent MnII sites leads to ferrimagnetic ordering, but in some cases antiferromagnetic coupling of ferrimagnetic layers are compensated and synthetic antiferromagnets are observed. The magnetic ordering temperatures for ferrimagnetic A2 MnII [MnII (CN)6 ] with both octahedral high- and low-spin MnII sites increase with decreasing ∠Mn-N≡C. The crystal structures for all of the extended structured materials were obtained by powder diffraction.

K-Ion Slides in Prussian Blue Analogues

We study the phenomenology of cooperative off-centering of K+ ions in potassiated Prussian blue analogues (PBAs). The principal distortion mechanism by which this off-centering occurs is termed a "K-ion slide", and its origin is shown to lie in the interaction between local electrostatic dipoles that couple through a combination of electrostatics and elastic strain. Using synchrotron powder X-ray diffraction measurements, we determine the crystal structures of a range of low-vacancy K2M[Fe(CN)6] PBAs (M = Ni, Co, Fe, Mn, Cd) and establish an empirical link between composition, temperature, and slide-distortion magnitude. Our results reflect the common underlying physics responsible for K-ion slides and their evolution with temperature and composition. Monte Carlo simulations driven by a simple model of dipolar interactions and strain coupling reproduce the general features of the experimental phase behavior. We discuss the implications of our study for optimizing the performance of PBA K-ion battery cathode materials and also its relevance to distortions in other, conceptually related, hybrid perovskites.

Perspective on Iron-Based Phosphate Cathode for Commercial Sodium-Ion Cells

Sodium (Na)-ion batteries (SIBs) have been considered as a potential device for large-scale energy storage. To date, some start-up companies have released their first-generation SIBs cathode materials. Among them, phosphate compounds, particularly iron (Fe)-based mixed phosphate compounds, present great potential for commercial SIBs owing to its low cost, environment friendly. In this perspective, a brief historical retrospect is first introduce to the development of Fe-based mixed phosphate cathodes in SIBs. Then, the recent development about this kind of cathode has been summarized. One of the iron-based phosphate materials, Na3 Fe2 (PO4 )P2 O7 , is used as an example to roughly calculate the energy density and estimate the cost at the cell level to highlight their advantages. Finally, some strategies are put up to further increase the energy density of SIBs. This timely perspective aims to educate the community on the critical benefits of the Fe-based mixed phosphate cathode and provide an up-to-date overview of this emerging field.

Designing CoHCF@FeHCF Core-Shell Structures to Enhance the Rate Performance and Cycling Stability of Sodium-Ion Batteries

Prussian blue analogs are well suited for sodium-ion battery cathode materials due to their cheap cost and high theoretical specific capacity. Nax CoFe(CN)6 (CoHCF), one of the PBAs, has poor rate performance and cycling stability, while Nax FeFe(CN)6 (FeHCF) has better rate and cycling performance. The CoHCF@FeHCF core-shell structure is designed with CoHCF as the core material and FeHCF as the shell material to enhance the electrochemical properties. The successfully prepared core-shell structure leads to a significant improvement in the rate performance and cycling stability of the composite compared to the unmodified CoHCF. The composite sample of core-shell structure has a specific capacity of 54.8 mAh g-1 at high magnification of 20 C (1 C = 170 mA g-1 ). In terms of cycle stability, it has a capacity retention rate of 84.1% for 100 cycles at 1 C, and a capacity retention rate of 82.7% for 200 cycles at 5 C. Kinetic analysis shows that the composite sample with the core-shell structure has fast kinetic characteristics, and the surface capacitance occupation ratio and sodium-ion diffusion coefficient are higher than those of the unmodified CoHCF.

Direct Observation of Magnetic Domain and Magnetization Reversal on Prussian Blue-Based Magnetic Films

Knowledge of the magnetic domain is indispensable for understanding the magnetostatic properties of magnets. However, to date, the magnetic domain has not yet been reported in the field of molecule-based magnets. Herein, we study the magnetic domains of molecule-based magnets. Two magnetic films of iron/chromium hexacyanidochromate FexCr1-x[Cr(CN)6]2/3·5H2O (x = 0; Film 1 and x = 0.2; Film 2) were prepared for investigation. The temperature evolution of surface magnetization was measured using magnetic force microscopy. Film 1 showed a magnetic domain below Curie temperature (TC) and its positive-magnetic polarization increased monotonously with decreasing temperature, while Film 2 showed positive magnetic polarization below TC and switches from positive to negative magnetization through a demagnetization state at 146 K. This study originally reports the temperature variation of the magnetization state at the magnetization reversal. The magnetic domains appeared as a maze pattern with an approximate domain size of one-to-several micrometers. This work shows that research on molecule-based magnets can be expanded from magnetochemistry to the magnetostatic engineering of bulk magnets, molecule-based magnetostatic engineering.

A Prussian blue analog as a decorporation agent for the simultaneous removal of cesium and reactive oxygen species

Radioactive cesium (Cs) is a significant concern due to its role as a major byproduct of nuclear fission and its potential for radioactive contamination. Internal contamination with radioactive Cs is characterized by immoderate production of reactive oxygen species (ROS), resulting in severe radiation damage. Therefore, the development of therapeutic strategies should focus on enhancing the excretion of radioactive Cs and reducing radiation-induced oxidative damage. However, current therapeutic drugs like Prussian blue (PB) have limited efficacy in addressing these issues. In this study, we present Cu3[Fe(CN)6]2 (CuFe) nanoparticles, a Prussian blue analog (PBA), which can not only efficiently sequester Cs but also exhibit resistance against radiation damage. The results of the adsorption studies demonstrate that CuFe outperforms PB in terms of adsorption performance. Further mechanistic investigations indicate that the increased adsorption capacity of CuFe may be attributed to the presence of additional defects resulting from the [Fe(CN)6] missing linkers. Moreover, CuFe mimics the functions of catalase (CAT) and superoxide dismutase (SOD) by effectively eliminating O2˙- and H2O2 while scavenging ˙OH, thereby mitigating ROS induced by radiative Cs. Importantly, in vivo study confirms the efficient Cs decorporation capability of CuFe. The fecal cumulative excretion rate of CuFe reaches 69.5%, which is 1.45 times higher than that of PB (48.8%). These findings demonstrate that CuFe exhibits excellent Cs removal performance and ROS scavenging ability, making it an attractive candidate for the treatment of Cs contamination.

Ferricyanide Armed Anodes Enable Stable Water Oxidation in Saturated Saline Water at 2 A/cm2

The direct seawater electrolysis at high current density and low overpotential affords an effective strategy toward clean and renewable hydrogen fuel production. However, the severe corrosion of anode as a result of the saturation of Cl- upon continuous seawater feeding seriously hamper the electrolytic process. Herein, cobalt ferricyanide / cobalt phosphide (CoFePBA/Co2 P) anodes with Cap/Pin structure are synthesized, which stably catalyze alkaline saturated saline water oxidation at 200-2000 mA cm-2 over hundreds of hours without corrosion. Together with the experimental findings, the molecular dynamics simulations reveal that PO4 3- and Fe(CN)6 3- generated by the electrode play synergistic role in repelling Cl- via electrostatic repulsion and dense coverage, which reduced Cl- adsorption by nearly 5-fold. The novel anionic synergy endow superior corrosion protection for the electrode, and is expected to promote the practical application of saline water electrolysis.

ECRAM Materials, Devices, Circuits and Architectures: A Perspective

Non-von-Neumann computing using neuromorphic systems based on two-terminal resistive nonvolatile memory elements has emerged as a promising approach, but its full potential has not been realized due to the lack of materials and devices with the appropriate attributes. Unlike memristors, which require large write currents to drive phase transformations or filament growth, electrochemical random access memory (ECRAM) decouples the "write" and "read" operations using a "gate" electrode to tune the conductance state through charge-transfer reactions, and every electron transferred through the external circuit in ECRAM corresponds to the migration of ≈1 ion used to store analogue information. Like static dopants in traditional semiconductors, electrochemically inserted ions modulate the conductivity by locally perturbing a host's electronic structure; however, ECRAM does so in a dynamic and reversible manner. The resulting change in conductance can span orders of magnitude, from gradual increments needed for analog elements, to large, abrupt changes for dynamically reconfigurable adaptive architectures. In this in-depth perspective, the history of ECRAM, the recent progress in devices spanning organic, inorganic, and 2D materials, circuits, architectures, the rich portfolio of challenging, fundamental questions, and how ECRAM can be harnessed to realize a new paradigm for low-power neuromorphic computing are discussed.

Tunable Intervalence Charge Transfer in Ruthenium Prussian Blue Analog Enables Stable and Efficient Biocompatible Artificial Synapses

Emerging concepts for neuromorphic computing, bioelectronics, and brain-computer interfacing inspire new research avenues aimed at understanding the relationship between oxidation state and conductivity in unexplored materials. This report expands the materials playground for neuromorphic devices to include a mixed valence inorganic 3D coordination framework, a ruthenium Prussian blue analog (RuPBA), for flexible and biocompatible artificial synapses that reversibly switch conductance by more than four orders of magnitude based on electrochemically tunable oxidation state. The electrochemically tunable degree of mixed valency and electronic coupling between N-coordinated Ru sites controls the carrier concentration and mobility, as supported by density functional theory computations and application of electron transfer theory to in situ spectroscopy of intervalence charge transfer. Retention of programmed states is improved by nearly two orders of magnitude compared to extensively studied organic polymers, thus reducing the frequency, complexity, and energy costs associated with error correction schemes. This report demonstrates dopamine-mediated plasticity of RuPBA synapses and biocompatibility of RuPBA with neuronal cells, evoking prospective application for brain-computer interfacing.

A Dormant Reagent Reaction-Diffusion Method for the Generation of Co-Fe Prussian Blue Analogue Periodic Precipitate Particle Libraries

Liesegang patterns that develop as a result of reaction-diffusion can simultaneously form products with slightly different sizes spatially separated in a single medium. We show here a reaction-diffusion method using a dormant reagent (citrate) for developing Liesegang patterns of cobalt hexacyanoferrate Prussian Blue analog (PBA) particle libraries. This method slows the precipitation reaction and produces different-sized particles in a gel medium at different locations. The gel-embedded particles are still catalytically active. Finally, the applicability of the new method to other PBAs and 2D systems is presented. The method proves promising for obtaining similar inorganic framework libraries with catalytic abilities.

Processing macromolecular diffuse scattering data

Diffuse scattering is a powerful technique to study disorder and dynamics of macromolecules at atomic resolution. Although diffuse scattering is always present in diffraction images from macromolecular crystals, the signal is weak compared with Bragg peaks and background, making it a challenge to visualize and measure accurately. Recently, this challenge has been addressed using the reciprocal space mapping technique, which leverages ideal properties of modern X-ray detectors to reconstruct the complete three-dimensional volume of continuous diffraction from diffraction images of a crystal (or crystals) in many different orientations. This chapter will review recent progress in reciprocal space mapping with a particular focus on the strategy implemented in the mdx-lib and mdx2 software packages. The chapter concludes with an introductory data processing tutorial using Python packages DIALS, NeXpy, and mdx2.

Tuning electronic and phononic states with hidden order in disordered crystals

Disorder in crystals is rarely random, and instead involves local correlations whose presence and nature are hidden from conventional crystallographic probes. This hidden order can sometimes be controlled, but its importance for physical properties of materials is not well understood. Using simple models for electronic and interatomic interactions, we show how crystals with identical average structures but different types of hidden order can have very different electronic and phononic band structures. Increasing the strength of local correlations within hidden-order states can open band gaps and tune mode (de)localisation-both mechanisms allowing for fundamental changes in physical properties without long-range symmetry breaking. Taken together, our results demonstrate how control over hidden order offers a new mechanism for tuning material properties, orthogonal to the conventional principles of (ordered) structure/property relationships.

Processing macromolecular diffuse scattering data

Diffuse scattering is a powerful technique to study disorder and dynamics of macromolecules at atomic resolution. Although diffuse scattering is always present in diffraction images from macromolecular crystals, the signal is weak compared with Bragg peaks and background, making it a challenge to visualize and measure accurately. Recently, this challenge has been addressed using the reciprocal space mapping technique, which leverages ideal properties of modern X-ray detectors to reconstruct the complete three-dimensional volume of continuous diffraction from diffraction images of a crystal (or crystals) in many different orientations. This chapter will review recent progress in reciprocal space mapping with a particular focus on the strategy implemented in the mdx-lib and mdx2 software packages. The chapter concludes with an introductory data processing tutorial using Python packages DIALS, NeXpy , and mdx2 .

Ultrafast Nucleation Reverses Dissolution of Transition Metal Ions for Robust Aqueous Batteries

The dissolution of transition metal ions causes the notorious peeling of active substances and attenuates electrochemical capacity. Frustrated by the ceaseless task of pushing a boulder up a mountain, Sisyphus of the Greek myth yearned for a treasure to be unearthed that could bolster his efforts. Inspirationally, by using ferricyanide ions (Fe(CN)₆^3-) in an electrolyte as a driving force and taking advantage of the fast nucleation rate of copper hexacyanoferrate (CuHCF), we successfully reversed the dissolution of Fe and Cu ions that typically occurs during cycling. The capacity retention increased from 5.7% to 99.4% at 0.5 A g^-1 after 10,000 cycles, and extreme stability of 99.8% at 1 A g^-1 after 40,000 cycles was achieved. Fe(CN)₆^3- enables atom-by-atom substitution during the electrochemical process, enhancing conductivity and reducing volume change. Moreover, we demonstrate that this approach is applicable to various aqueous batteries (i.e., NH₄⁺, Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, and Al³⁺).

Microbial synthesis of Prussian blue for potentiating checkpoint blockade immunotherapy

Cancer immunotherapy is revolutionizing oncology. The marriage of nanotechnology and immunotherapy offers a great opportunity to amplify antitumor immune response in a safe and effective manner. Here, electrochemically active Shewanella oneidensis MR-1 can be applied to produce FDA-approved Prussian blue nanoparticles on a large-scale. We present a mitochondria-targeting nanoplatform, MiBaMc, which consists of Prussian blue decorated bacteria membrane fragments having further modifications with chlorin e6 and triphenylphosphine. We find that MiBaMc specifically targets mitochondria and induces amplified photo-damages and immunogenic cell death of tumor cells under light irradiation. The released tumor antigens subsequently promote the maturation of dendritic cells in tumor-draining lymph nodes, eliciting T cell-mediated immune response. In two tumor-bearing mouse models using female mice, MiBaMc triggered phototherapy synergizes with anti-PDL1 blocking antibody for enhanced tumor inhibition. Collectively, the present study demonstrates biological precipitation synthetic strategy of targeted nanoparticles holds great potential for the preparation of microbial membrane-based nanoplatforms to boost antitumor immunity.

Prussian blue nanozymes coated with Pluronic attenuate inflammatory osteoarthritis by blocking c-Jun N-terminal kinase phosphorylation

Osteoarthritis (OA) is a degenerative joint disorder associated with inflammation, functional disability, and high socioeconomic costs. The development of effective therapies against inflammatory OA has been limited owing to its complex and multifactorial nature. The efficacy of Prussian blue nanozymes coated with Pluronic (PPBzymes), US Food and Drug Administration-approved components, and their mechanisms of action have been described in this study, and PPBzymes have been characterized as a new OA therapeutic. Spherical PPBzymes were developed via nucleation and stabilization of Prussian blue inside Pluronic micelles. A uniformly distributed diameter of approximately 204 nm was obtained, which was maintained after storage in an aqueous solution and biological buffer. This indicates that PPBzymes are stable and could have biomedical applications. In vitro data revealed that PPBzymes promote cartilage generation and reduce cartilage degradation. Moreover, intra-articular injections with PPBzymes into mouse joints revealed their long-term stability and effective uptake into the cartilage matrix. Furthermore, intra-articular PPBzymes injections attenuated cartilage degradation without exhibiting cytotoxicity toward the synovial membrane, lungs, and liver. Notably, based on proteome microarray data, PPBzymes specifically block the JNK phosphorylation, which modulates inflammatory OA pathogenesis. These findings indicate that PPBzymes might represent a biocompatible and effective nanotherapeutic for obstructing JNK phosphorylation.

Advance of Prussian Blue-Derived Nanohybrids in Energy Storage: Current Status and Perspective

Great changes have occurred in the energy storage area in recent years as a result of rapid economic expansion. People have conducted substantial research on sustainable energy conversion and storage systems in order to mitigate the looming energy crisis. As a result, developing energy storage materials is critical. Materials with an open frame structure are known as Prussian blue analogs (PBAs). Anode materials for oxides, sulfides, selenides, phosphides, borides, and carbides have been extensively explored as anode materials in the field of energy conversion and storage in recent years. The advantages and disadvantages of oxides, sulfides, selenides, phosphides, borides, carbides, and other elements, as well as experimental methodologies and electrochemical properties, are discussed in this work. The findings reveal that employing oxides, sulfides, selenides, phosphides, borides, and other electrode materials to overcome the problems of low conductivity, excessive material loss, and low specific volume is ineffective. Therefore, this review intends to address the issues of diverse energy storage materials by combining multiple technologies to manufacture battery materials with low cost, large capacity, and extended service life.

Metal-Mediated Oligomerization Reactions of the Cyaphide Anion

The cyaphide anion, CP- , is shown to undergo three distinct oligomerization reactions in the coordination sphere of metals. Reductive coupling of Au(IDipp)(CP) (IDipp=1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) by Sm(Cp*)2 (OEt2 ) (Cp*=1,2,3,4,5-pentamethylcyclopentadienyl), was found to afford a tetra-metallic complex containing a 2,3-diphosphabutadiene-1,1,4,4-tetraide fragment. By contrast, non-reductive dimerization of Ni(SIDipp)(Cp)(CP) (SIDipp=1,3-bis(2,6-diisopropylphenyl)-imidazolidin-2-ylidene; Cp=cyclopentadienyl), gives rise to an asymmetric bimetallic complex containing a 1,3-diphosphacyclobutadiene-2,4-diide moiety. Spontaneous trimerization of Sc(Cp*)2 (CP) results in the formation of a trimetallic complex containing a 1,3,5-triphosphabenzene-2,4,6-triide fragment. These transformations show that while cyaphido transition metal complexes can be readily accessed using metathesis reactions, many such species are unstable to further oligomerization processes.

Divalent Oxidation State Ni as an Active Intermediate in Prussian Blue Analogues for Electrocatalytic Urea Oxidation

Urea degradation is one of the most crucial links in the natural nitrogen cycle. Exploring the real active species in the urea electro-oxidation process is of great significance for understanding the urea electro-oxidation mechanism and designing catalysts. A highly active and stable Prussian blue analogue catalyst (PBA@NiFe/NF) loaded on nickel foam was synthesized for electro-oxidation of urea. In situ Raman spectra revealed that Ni in PBA@NiFe/NF was able to maintain a stable divalent nickel (Ni(II)) state for up to 3.5 h during the initial urea oxidation process, which is rarely reported in previous research studies. In addition, with the participation of iron, the Ni-Fe bimetallic center significantly improves the electro-oxidation of urea. Our work provides a new idea for prolonging the Ni(II) activity in electrocatalytic oxidation of urea.

Achieving High Performance Electrode for Energy Storage with Advanced Prussian Blue-Drived Nanocomposites-A Review

Recently, Prussian blue analogues (PBAs)-based anode materials (oxides, sulfides, selenides, phosphides, borides, and carbides) have been extensively investigated in the field of energy conversion and storage. This is due to PBAs' unique properties, including high theoretical specific capacity, environmental friendly, and low cost. We thoroughly discussed the formation of PBAs in conjunction with other materials. The performance of composite materials improves the electrochemical performance of its energy storage materials. Furthermore, new insights are provided for the manufacture of low-cost, high-capacity, and long-life battery materials in order to solve the difficulties in different electrode materials, combined with advanced manufacturing technology and principles. Finally, PBAs and their composites' future challenges and opportunities are discussed.

Chemical Tuning Meets 2D Molecular Magnets

2D magnets provoke a surge of interest in large anisotropy in reduced dimensions and are promising for next-generation information technology where dynamic magnetic tuning is essential. Until recently, the crucial metal-organic magnet Cr(pyz)₂ ·xLiCl·yTHF with considerable high coercivity and high-temperature magnetic order opens up a new platform to control magnetism in metal-organic materials at room temperature. Here, an in-situ chemical tuning route is reported to realize the controllable transformation of low-temperature magnetic order into room-temperature hard magnetism in Cr(pyz)₂ ·xLiCl·yTHF. The chemical tuning via electrochemical lithiation and solvation/desolvation exhibits continuously variable magnetic features from cryogenic magnetism to the room-temperature optimum performance of coercivity (H_c ) of 8500 Oe and energy product of 0.6 MGOe. Such chemically flexible tunability of room-temperature magnetism is ascribed to the different degrees of lithiation and solvation that modify the stoichiometry and Cr-pyrazine coordination framework. Furthermore, the additively manufactured hybrid magnets show air stability and electromagnetic induction, providing potential applications. The findings here suggest chemical tuning as a universal approach to control the anisotropy and magnetism of 2D hybrid magnets at room temperature, promising for data storage, magnetic refrigeration, and spintronics.

Truchet-tile structure of a topologically aperiodic metal-organic framework

When tiles decorated to lower their symmetry are joined together, they can form aperiodic and labyrinthine patterns. Such Truchet tilings offer an efficient mechanism of visual data storage related to that used in barcodes and QR codes. We show that the crystalline metal-organic framework [OZn₄][1,3-benzenedicarboxylate]₃ (TRUMOF-1) is an atomic-scale realization of a complex three-dimensional Truchet tiling. Its crystal structure consists of a periodically arranged assembly of identical zinc-containing clusters connected uniformly in a well-defined but disordered fashion to give a topologically aperiodic microporous network. We suggest that this unusual structure emerges as a consequence of geometric frustration in the chemical building units from which it is assembled.

Copolymerization of Carbonyl Sulfide and Propylene Oxide via a Heterogeneous Prussian Blue Analogue Catalyst with High Productivity and Selectivity

This study demonstrates the superiority of a stable and well-defined heterogeneous cobalt hexacyanocobaltate (Co₃ [Co(CN)₆ ]₂ ), a typical cobalt Prussian Blue Analogue (CoCo-PBA) that catalyzes the copolymerization of carbonyl sulfide (COS) and propylene oxide (PO) to produce poly(propylene monothiocarbonate)s (PPMTC). The number-average molecular weights of the PPMTC were 66.4 to 139.4 kg/mol, with a polydispersity of 2.0-3.9. The catalyst productivity reached 1040 g polymer/g catalyst (12.0 h). The oxygen-sulfur exchange reaction (O/S ER), which would generate random thiocarbonate and carbonate units, was effectively suppressed, and thus the selectivity of the monothiocarbonate over carbonate linkages was up to >99%. It was shown that no cyclic thiocarbonate byproduct was produced during the heterogeneous catalysis of COS/PO copolymerization using CoCo-PBA as the catalyst. The content of monothiocarbonate and ether units in the copolymer chain could be regulated by tuning the feeding amount of COS.

Pairing of Aqueous and Nonaqueous Electrosynthetic Reactions Enabled by a Redox Reservoir Electrode

Paired electrolysis methods are appealing for chemical synthesis because they generate valuable products at both electrodes; however, development of such reactions is complicated by the need for both half-reactions to proceed under mutually compatible conditions. Here, a modular electrochemical synthesis (ModES) strategy bypasses these constraints using a "redox reservoir" (RR) to pair electrochemical half-reactions across aqueous and nonaqueous solvents. Electrochemical oxidation reactions in organic solvents, the conversion of 4-t-butyltoluene to benzylic dimethyl acetal and aldehyde in methanol or the oxidative C-H amination of naphthalene in acetonitrile, and the reduction of oxygen to hydrogen peroxide in water were paired using nickel hexacyanoferrate as an RR that can selectively store and release protons (and electrons) while serving as the counter electrode for these reactions. Selective proton transport through the RR is optimized and confirmed to enable the ion balance, and thus the successful pairing, between redox half-reactions that proceed with different rates, on different scales, and in different solvents (methanol, acetonitrile, and water).

WITHDRAWN: Prussian blue nanozymes coated with pluronic attenuate inflammatory osteoarthritis by blocking c-Jun N-terminal kinase phosphorylation

This article has been withdrawn: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/policies/article-withdrawal). This article has been withdrawn at the request of the editor and publisher. The publisher regrets that an error occurred which led to the premature publication of this paper. This error bears no reflection on the article or its authors. The publisher apologizes to the authors and the readers for this unfortunate error.

Molecular magneto-ionic proton sensor in solid-state proton battery

High proton conductivity originated from its small size and the diffusion-free Grotthuss mechanism offers immense promise for proton-based magneto-ionic control of magnetic materials. Despite such promise, the realization of proton magneto-ionics is hampered by the lack of proton-responsive magnets as well as the solid-state sensing method. Here, we report the proton-based magneto-ionics in molecule-based magnet which serves as both solid-state proton battery electrode and radiofrequency sensing medium. The three-dimensional hydrogen-bonding network in such a molecule-based magnet yields a high proton conductivity of 1.6 × 10^-3 S cm^-1. The three-dimensional printed vascular hydrogel provides the on-demand proton stimulus to enable magneto-ionics, where the Raman spectroscopy shows the redox behavior responsible for the magnetism control. The radiofrequency proton sensor shows high sensitivity in a wide proton concentration range from 10^-6 to 1 molar under a low working radiofrequency and magnetic field of 1 GHz and 405 Oe, respectively. The findings shown here demonstrate the promising sensing application of proton-based magneto-ionics.

Interplay between Transition-Metal K-edge XMCD and Magnetism in Prussian Blue Analogs

To disentangle the information contained in transition-metal K-edge X-ray magnetic circular dichroism (XMCD), two series of Prussian blue analogs (PBAs) were investigated as model compounds. The number of 3d electrons and the magnetic orbitals have been varied on both sites of the bimetallic cyanide polymer by combining with the hexacyanoferrate or the hexacyanochromate entities' various divalent metal ions A²⁺ (Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, and Cu²⁺). These PBA were studied by Fe and Cr X-ray absorption spectroscopy and XMCD. The results, compared to those obtained at the A K-edges in a previous work, show that transition-metal K-edge XMCD is very sensitive to orbital symmetry and can therefore give valuable information on the local structure of the magnetic centers. Expressions of the intensity of the main 1s → 4p contribution to the signal are proposed for all K-edges and all compounds. The results pave the way toward a new tool for molecular materials able to give access to valuable information on the local orientation of the magnetic moments or to better understand the role of 4p orbitals involved in their magnetic properties.