High-entropy polymer produces a giant electrocaloric effect at low fields

Giant enhancement and quick stabilization of capacitance in antiferroelectrics by phase transition engineering

The antiferroelectric-ferroelectric phase transition is a basic principle that holds promise for antiferroelectric ceramics in high capacitance density nonlinear capacitors. So far, the property optimization based on antiferroelectric-ferroelectric transition is solely undertaken by chemical composition tailoring. Alternately, here we propose a phase transition engineering tactic by applying pulsed electric stimulus near the critical electric field, which finally results in ~54.3% enhancement and quick stabilization of capacitance density in Pb0.97La0.02(Zr0.35Sn0.55Ti0.10)O3 antiferroelectric ceramics. Ex-situ and in-situ structural characterizations show that electric stimuli can induce the charming successive structural evolution, including domain evolution from multidomain to monodomain state, and modulation period change from 7.49 to 7.73. Structure-property correlation indicates that the antiferroelectric-ferroelectric phase transition engineering mainly stems from the unexpected irreversible recovery of the modulated structures. The present findings would deepen the understanding of the structural phase transition and provoke composition-independent post-treatment property innovation in the incommensurate antiferroelectric materials and devices.

Peptide programming of supramolecular vinylidene fluoride ferroelectric phases

Ferroelectric structures have spontaneous macroscopic polarization that can be inverted using external electric fields and have potential applications including information storage, energy transduction, ultralow-power nanoelectronics1,2 and biomedical devices3. These functions would benefit from nanoscale control of ferroelectric structure, the ability to switch polarization with lower applied fields (low coercive field) and biocompatibility. Soft ferroelectrics based on poly(vinylidene fluoride) (PVDF)4-6 have a thermodynamically unstable ferroelectric phase in the homopolymer, complex semi-crystalline structures, and high coercive fields. Here we report on ferroelectric materials formed by water-soluble molecules containing only six VDF repeating units covalently conjugated to a tetrapeptide, with the propensity to assemble into the β-sheet structures that are ubiquitous in proteins. This led to the discovery of ribbon-shaped ferroelectric supramolecular assemblies that are thermodynamically stable with their long axes parallel to both the preferred hydrogen-bonding direction of β-sheets and the bistable polar axes of VDF hexamers. Relative to a commonly used ferroelectric copolymer, the biomolecular assemblies exhibit a coercive field that is two orders of magnitude lower, as the result of supramolecular dynamics, and a similar level of remnant polarization, despite having a peptide content of 49 wt%. Furthermore, the Curie temperature of the assemblies is about 40 °C higher than that of a copolymer containing a similar amount of VDF. This supramolecular system was created using a biologically inspired strategy that is attractive in terms of sustainability and that could lead to new functions for soft ferroelectrics.

Efficient roller-driven elastocaloric refrigerator

Elastocaloric cooling has experienced fast development over the past decade owing to its potential to reshape the refrigeration industry. While the solid-state elastocaloric refrigerant is emission-free, the efficiency of the state-of-the-art elastocaloric cooling systems is not sufficient yet to reduce carbon emissions during operation. In this study, we double the coefficient of performance, the most commonly used efficiency metric, via the synergy of material-level advances in TiNiCu and the system-level roller-driven mechanism capable of recovering kinetic energy. On the materials level, a 125% improvement in coefficient of performance is illustrated in TiNiCu compared to NiTi, empowered by the B2-B19 martensitic transformation with improved lattice compatibility and the grain boundary strengthening from the nanocrystalline structure. On the system level, owing to the properly sized angular momentum in rotating parts, 78% work recovery efficiency is reported, transcending the theoretical limit previously unattainable without kinetic energy recovery. This confluence of materials and mechanical innovations propels elastocaloric cooling systems into a new realm of efficiency and paves the way for their practical application.

Electronic cooling and energy harvesting using ferroelectric polymer composites

Thermal management emerges as a grand challenge of next-generation electronics. Efforts to develop compact, solid-state cooling devices have led to the exploration of the electrocaloric effect of ferroelectric polymers. Despite recent advances, the applications of electrocaloric polymers on electronics operating at elevated temperatures remain essentially unexplored. Here, we report that the ferroelectric polymer composite composed of highly-polarized barium strontium titanate nanofibers and electron-accepting [6,6] phenyl-C61-butyric acid methyl ester retains fast electrocaloric responses and stable cyclability at elevated temperatures. We demonstrate the effectiveness of electrocaloric cooling in a polymer composite for a pyroelectric energy harvesting device. The device utilizes a simulated central processing unit (CPU) as the heat source. Our results show that the device remains operational even when the CPU is overheated. Furthermore, we show that the composite functions simultaneously as a pyroelectric energy converter to harvest thermal energy from an overheated chip into electricity in the electrocaloric process. This work suggests a distinct approach for overheating protection and recycling waste heat of microelectronics.

Shearo-caloric effect enhances elastocaloric responses in polymer composites for solid-state cooling

Room-temperature elastocaloric cooling is considered as a zero-global-warming-potential alternative to conventional vapor-compression refrigeration technology. However, the limited entropy and large-deformation features of elastocaloric polymers hinder the creation of the breakthrough in their caloric responses and device development. Herein, we report that the addition of a small amount of inorganic nanofillers into the polymer induces the aggregate of the effective elastic chains via shearing the interlaminar molecular chains, which provides an additional contribution to the entropy in elastocaloric polymers. Consequently, the adiabatic temperature change of -18.0 K and the isothermal entropy change of 187.4 J kg-1 K-1 achieved in the polymer nanocomposites outperform those of current elastocaloric polymers. Moreover, a large-deformation cooling system with a work recovery efficiency of 56.3% is demonstrated. This work opens a new avenue for the development of high-performance elastocaloric polymers and prototypes for solid-state cooling applications.

Elastocaloric Response of Isotropic Liquid Crystalline Elastomers

Liquid crystalline elastomers (LCEs) are soft materials that associate order and deformation. Upon deformation, mechanically induced changes order affect entropy and can produce a caloric output (elastocaloric). Elastocaloric effects in materials continue to be considered for functional use as solid state refrigerants. Prior elastocaloric investigations of LCEs and related materials have measured ≈2 °C temperature changes upon deformation (100% strain). Here, the elastocaloric response of LCEs is explored that are prepared with a subambient nematic to isotropic transition temperature. These materials are referred as "isotropic" liquid crystalline elastomers. The LCEs are prepared by a two-step thiol-Michael/thiol-ene reaction. This polymer network chemistry enhances elastic recovery and reduces hysteresis compared to acrylate-based chemistries. The LCEs exhibit appreciable elastocaloric temperature changes upon deformation and recovery (> ± 3 °C, total ΔT of 6 °C) to deformation driven by minimal force (<< 1 MPa). Notably, the strong association of deformation and order and the resulting temperature change attained at low force achieves a responsivity of 14 °C MPa-1 which is seven times greater than natural rubber.

Intrinsic Elastomer with Remarkable Dielectric Constant via Elastification of Relaxor Ferroelectric Polymer

High-dielectric-constant elastomers always play a critical role in the development of wearable electronics for actuation, energy storage, and sensing; therefore, there is an urgent need for effective strategies to enhance dielectric constants. The present methods mainly involve adding inorganic or conductive fillers to the polymer elastomers, however, the addition of fillers causes a series of problems, such as large dielectric loss, increased modulus, and deteriorating interface conditions. Here, the elastification of relaxor ferroelectric polymers is investigated through slight cross-linking, aiming to obtain intrinsic elastomers with high-dielectric constants. By cross-linking of the relaxor ferroelectric polymer poly(vinylidene fluoride-ter-trifluoroethylene-ter-chlorofluoroethylene) with a long soft chain cross-linker, a relaxor ferroelectric elastomer with an enhanced dielectric constant is obtained, twice that of the pristine relaxor ferroelectric polymer and surpassing all reported intrinsic elastomers. This elastomer maintains its high-dielectric constant over a wide temperature range and exhibits robust mechanical fatigue resistance, chemical stability, and thermal stability. Moreover, the ferroelectricity of the elastomer remains stable under strains up to 80%. This study offers a simple and effective way to enhance the dielectric constant of intrinsic elastomers, thus facilitating advancements in soft robots, biosensors, and wearable electronics.

Introducing Photo-Cross-Linkable Functionalities on P(VDF-co-TrFE) Ferroelectric Copolymer

Ferroelectric polymers have emerged as crucial materials for the development of advanced organic electronic devices. Their recent high-end commercial applications as fingerprint sensors have only increased the amount of scientific interest around them. Despite an ever-larger body of studies focusing on optimizing the properties of ferroelectric polymers by physical means (e. g., annealing, stretching, blending or nano-structuring), post-polymerization chemical modification of such polymers has only recently become a field of active study with great promise in expanding the scope of those polymers. In this work, a solution-based post-polymerization modification method was developed for the safe and facile grafting of a plethora of functional groups to the backbone of commercially available Poly(vinylidene fluoride-co-trifluoroethylene P(VDF-co-TrFE) ferroelectric polymers. To showcase the versatility of this approach, photosensitive groups were grafted onto the polymeric backbone, enabling them to undergo photo-cross-linking. Finally, these modified polymers were used as functional negative photoresists in a photolithographic process, highlighting the potential of this method to integrate ferroelectric fluorinated electroactive polymers into standard electronic microfabrication production lines.

A Highly Deficient Medium-Entropy Perovskite Ceramic for Electromagnetic Interference Shielding under Harsh Environment

Materials that can provide reliable electromagnetic interference (EMI) shielding in highly oxidative atmosphere at elevated temperature are indispensable in the fast-developing aerospace field. However, most of conductor-type EMI shielding materials such as metals can hardly withstand the high-temperature oxidation, while the conventional dielectric-type materials cannot offer sufficient shielding efficiency in gigahertz (GHz) frequencies. Here, a highly deficient medium-entropy (ME) perovskite ceramic as an efficient EMI shielding material in harsh environment, is demonstrated. The synergistic effect of entropy stabilization and aliovalent substitution on A-site generate abnormally high concentration of Ti and O vacancies that are stable under high-temperature oxidation. Due to the clustering of vacancies, the highly deficient perovskite ceramic exhibits giant complex permittivity and polarization loss in GHz, leading to the specific EMI shielding effectiveness above 30 dB/mm in X-band even after 100 h of annealing at 1000 °C in air. Along with the low thermal conductivity, the aliovalent ME perovskite can serve as a bifunctional shielding material for applications in aircraft engines and reusable rockets.

A full solid-state conceptual magnetocaloric refrigerator based on hybrid regeneration

The environmental friendliness and high efficiency of magnetocaloric refrigeration make it a promising substitute for vapor compression refrigeration. However, the common use of heat transfer fluid in conventional passive magnetic regenerators (PMRs) and active magnetic regenerators (AMRs) makes only partial materials contribute to the regeneration process, which produces large regeneration loss and greatly limits the regeneration efficiency and refrigeration performance at high frequency. Herein, we propose a new conceptual hybrid magnetic regenerator (HMR) composed of multiple solid-state high thermal conductivity materials (HTCMs) and magnetocaloric materials (MCMs), in which both HTCM and MCM elements participate in the regeneration process. This novel working mode could greatly reduce regeneration losses caused by dead volume, pressure losses, and temperature nonuniformity in heat transfer substances to markedly improve regeneration efficiency at high working frequencies. Using the experimentally obtained adiabatic temperature change and magnetic work and with the help of finite element simulation, a maximum temperature of 26 K, a dramatically large cooling power of 8.3 kW/kg, and a maximum ideal exergy efficiency of 54.2% are achieved at the working frequency of 10 Hz for an ideal prototype device of a rotary HMR magnetocaloric refrigerator, which shows potential for achieving an integrative, advanced performance against current AMR/PMR systems.

Clarifying the four core effects of high-entropy materials

High-entropy materials emerged as a field of research in 2004, when the first research on high-entropy alloys was published. The scope was soon expanded from high-entropy alloys to medium-entropy alloys, as well as to ceramics, polymers and composite materials. A fundamental understanding on high-entropy materials was proposed in 2006 by the 'four core effects' - high-entropy, severe-lattice-distortion, sluggish-diffusion and cocktail effects - which are often used to describe and explain the mechanisms of various peculiar phenomena associated with high-entropy materials. Throughout the years, the effects have been examined rigorously, and their validity has been affirmed. This Perspective discusses the fundamental understanding of the four core effects in high-entropy materials and gives further insights to strengthen the understanding for these effects. All these clarifications are believed to be helpful in understanding low-to-high-entropy materials as well as to aid the design of materials when studying new compositions or pursuing their use in applications.

Quantitative predictive theories through integrating quantum, statistical, equilibrium, and nonequilibrium thermodynamics

Today's thermodynamics is largely based on the combined law for equilibrium systems and statistical mechanics derived by Gibbs in 1873 and 1901, respectively, while irreversible thermodynamics for nonequilibrium systems resides essentially on the Onsager Theorem as a separate branch of thermodynamics developed in 1930s. Between them, quantum mechanics was invented and quantitatively solved in terms of density functional theory (DFT) in 1960s. These three scientific domains operate based on different principles and are very much separated from each other. In analogy to the parable of the blind men and the elephant articulated by Perdew, they individually represent different portions of a complex system and thus are incomplete by themselves alone, resulting in the lack of quantitative agreement between their predictions and experimental observations. Over the last two decades, the author's group has developed a multiscale entropy approach (recently termed as zentropy theory) that integrates DFT-based quantum mechanics and Gibbs statistical mechanics and is capable of accurately predicting entropy and free energy of complex systems. Furthermore, in combination with the combined law for nonequilibrium systems presented by Hillert, the author developed the theory of cross phenomena beyond the phenomenological Onsager Theorem. The zentropy theory and theory of cross phenomena jointly provide quantitative predictive theories for systems from electronic to any observable scales as reviewed in the present work.

Self-oscillating polymeric refrigerator with high energy efficiency

Electrocaloric1,2 and electrostrictive3,4 effects concurrently exist in dielectric materials. Combining these two effects could achieve the lightweight, compact localized thermal management that is promised by electrocaloric refrigeration5. Despite a handful of numerical models and schematic presentations6,7, current electrocaloric refrigerators still rely on external accessories to drive the working bodies8-10 and hence result in a low device-level cooling power density and coefficient of performance (COP). Here we report an electrocaloric thin-film device that uses the electro-thermomechanical synergy provided by polymeric ferroelectrics. Under one-time a.c. electric stimulation, the device is thermally and mechanically cycled by the working body itself, resulting in an external-driver-free, self-cycling, soft refrigerator. The prototype offers a directly measured cooling power density of 6.5 W g-1 and a peak COP exceeding 58 under a zero temperature span. Being merely a 30-µm-thick polymer film, the device achieved a COP close to 24 under a 4 K temperature span in an open ambient environment (32% thermodynamic efficiency). Compared with passive cooling, the thin-film refrigerator could immediately induce an additional 17.5 K temperature drop against an electronic chip. The soft, polymeric refrigerator can sense, actuate and pump heat to provide automatic localized thermal management.

Design of High-Entropy Tape Electrolytes for Compression-Free Solid-State Batteries

Advanced solid electrolytes with strong adhesion to other components are the key for the successes of solid-state batteries. Unfortunately, traditional solid electrolytes have to work under high compression to maintain the contact inside owing to their poor adhesion. Here, a concept of high-entropy tape electrolyte (HETE) is proposed to simultaneously achieve tape-like adhesion, liquid-like ion conduction, and separator-like mechanical properties. This HETE is designed with adhesive skin layer on both sides and robust skeleton layer in the middle. The significant properties of the three layers are enabled by high-entropy microstructures which are realized by harnessing polymer-ion interactions. As a result, the HETE shows high ionic conductivity (3.50 ± 0.53 × 10-4 S cm-1 at room temperature), good mechanical properties (toughness 11.28 ± 1.12 MJ m-3, strength 8.18 ± 0.28 MPa), and importantly, tape-like adhesion (interfacial toughness 231.6 ± 9.6 J m-2). Moreover, a compression-free solid-state tape battery is finally demonstrated by adhesion-based assembling, which shows good interfacial and electrochemical stability even under harsh mechanical conditions, such as twisting and bending. The concept of HETE and compression-free solid-state tape batteries may bring promising solutions and inspiration to conquer the interface challenges in solid-state batteries and their manufacturing.

Low-k nano-dielectrics facilitate electric-field induced phase transition in high-k ferroelectric polymers for sustainable electrocaloric refrigeration

Ferroelectric polymer-based electrocaloric effect may lead to sustainable heat pumps and refrigeration owing to the large electrocaloric-induced entropy changes, flexible, lightweight and zero-global warming potential. Herein, low-k nanodiamonds are served as extrinsic dielectric fillers to fabricate polymeric nanocomposites for electrocaloric refrigeration. As low-k nanofillers are naturally polar-inactive, hence they have been widely applied for consolidate electrical stability in dielectrics. Interestingly, we observe that the nanodiamonds markedly enhances the electrocaloric effect in relaxor ferroelectrics. Compared with their high-k counterparts that have been extensively studied in the field of electrocaloric nanocomposites, the nanodiamonds introduces the highest volumetric electrocaloric enhancement (~23%/vol%). The resulting polymeric nanocomposite exhibits concurrently improved electrocaloric effect (160%), thermal conductivity (175%) and electrical stability (125%), which allow a fluid-solid coupling-based electrocaloric refrigerator to exhibit an improved coefficient of performance from 0.8 to 5.3 (660%) while maintaining high cooling power (over 240 W) at a temperature span of 10 K.

Breaking the Mutual Constraint between Polarization and Voltage Resistance with Nanograined High-Entropy Ceramic

Dielectric ceramics with a high energy storage capacity are key to advanced pulsed power capacitors. However, conventional materials face a mutual constraint between polarization strength and the breakdown strength bottleneck. To address this limitation, the concept of nanograined high-entropy ceramics is introduced in this work. By introducing a large number of constituent elements into the A-site of perovskite material lattice, high-entropy (Bi0.2K0.2Ba0.2Sr0.2Ca0.2)TiO3-0.2 'CuO relaxor ceramic with nanoscale grains have been successfully prepared, which breaks the mutual constraint between polarization strength and breakdown strength bottleneck and results a recoverable energy density (Wrec ∼ 6.86 J/cm3) and an efficiency (η ∼ 87.7%) at 670 kV/cm. Moreover, its excellent stability makes it potentially useful under a variety of extreme conditions, including at high temperatures and high/low frequencies. These obtained results demonstrate that this nanograined high-entropy lead-free perovskite ceramic has great potential for energy storage applications.

Synergistic Improvement of Dielectric and Thermal Conductivity Properties for Polymers Filled with Multifunctional Modified Nanowires

Dielectric composites are widely used in power electronics, power systems, aerospace, and other fields due to their extremely high power density. However, if their energy density can be further increased, the application range will be greatly improved. Improving the dielectric constant of composites is one of the most effective ways to increase the energy density. In this study, a preparation method for copper calcium titanate nanowires (CCTO-NWs) with adjustable aspect ratio was investigated. Upon incorporation of these CCTO-NWs into the polymer matrix, the nanocomposites exhibit a significantly higher dielectric constant and a lower dielectric loss. In addition, a thin layer of Al2O3 with excellent thermal conductivity is coated on the surface of the CCTO-NWs to form a core-shell structure nanowire CCTO-NW@Al2O3. The introduction of the thermal conductive layer of Al2O3 not only creates a continuous heat transfer path within the dielectric composite, increasing the thermal conductivity of the composite from 0.11 W/(m·K) of pure HIPS to 1.12 W/(m·K), but also serves as a buffer layer between HIPS and CCTO-NWs, effectively alleviating the electric field distortion caused by the large difference in the dielectric constant between them, thereby optimizing the dielectric properties of the composite and reducing the dielectric permeability threshold from 30 to 20 vol %. This work provides an effective strategy for synergistically improving the dielectric constant and thermal conductivity of dielectric composites while also taking into account the good flexibility of polymer/ceramic nanocomposites.

Colossal electrocaloric effect in an interface-augmented ferroelectric polymer

The electrocaloric effect demands the maximized degree of freedom (DOF) of polar domains and the lowest energy barrier to facilitate the transition of polarization. However, optimization of the DOF and energy barrier-including domain size, crystallinity, multiconformation coexistence, polar correlation, and other factors in bulk ferroelectrics-has reached a limit. We used organic crystal dimethylhexynediol (DMHD) as a three-dimensional sacrificial master to assemble polar conformations at the heterogeneous interface in poly(vinylidene fluoride)-based terpolymer. DMHD was evaporated, and the epitaxy-like process induced an ultrafinely distributed, multiconformation-coexisting polar interface exhibiting a giant conformational entropy. Under a low electric field, the interface-augmented terpolymer had a high entropy change of 100 J/(kg·K). This interface polarization strategy is generally applicable to dielectric capacitors, supercapacitors, and other related applications.

High cooling performance in a double-loop electrocaloric heat pump

Cooling through solid-state electrocaloric materials is an attractive replacement for vapor compression. Despite recent efforts, devices that are potentially commercially competitive have not been developed. We present an electrocaloric cooler with a maximum temperature span of 20.9 kelvin and a maximum cooling power of 4.2 watts under the moderate applied electric field of 10 volts per micrometer without any observed breakdown. Moreover, the maximum coefficient of performance, even taking into account energy expended on fluid pumping, reaches 64% of Carnot's efficiency as long as energy is properly recovered. We believe that this demonstration shows electrocaloric cooling to be a very promising alternative to vapor compression cooling.

Pressure-freezing of dodecane: exploring the crystal structures, formation kinetics and phase diagrams for colossal barocaloric effects in n-alkanes

Barocaloric (BC) materials provide cheaper and more energy efficient alternatives to traditional refrigerants. Some liquid alkanes were recently shown to exhibit a colossal BC effect, matching the entropy changes in commercial vapour-liquid refrigerants. Dodecane was predicted to have the largest entropy change among the studied alkanes. Using synchrotron powder and single-crystal X-ray diffraction, Raman spectroscopy, and lattice energy calculations, we investigated the BC effects of n-dodecane at high pressures and room temperature. Remarkably, a colossal entropy change |ΔS| of 778 J kg-1 K-1 at 0.15(3) GPa and 295 K was observed. Spectroscopic studies revealed that this entropy change correlates closely with the conformational transition from mixed gauche to all-trans forms during pressure-induced crystallization. Additionally, the usage of a diamond anvil cell allowed the determination of the crystal structures of in situ crystallized n-un- and dodecane, as well as evaluation of the pressure-dependent crystal growth kinetics. Furthermore, our research suggests that the entropy change (per kilogram) upon compression should be similar for all n-alkanes within the range of 9-18 carbon atoms in the molecule, based on their lattice energies. Even-numbered alkanes are predicted to exhibit superior BC properties compared to their odd-numbered counterparts due to the more symmetric crystal structures and lower propensity to form plastic phases with lower transition entropy.

Modulating piezoelectricity and mechanical strength via three-dimensional gradient structure for piezoelectric composites

Advanced flexible electronic devices make urgent demand for wearing comfort and data accuracy. Piezoelectric composites exhibit great potential, but mutually constrained mechanical strength and electrical output limit their further applications. Here, we design a gradient PMN-PT/PVDF nanocomposite via a non-equilibrium process integrated with a modified electrospinning and hot-pressing process to modulate the piezoelectric output and mechanical strength. The enhanced piezoelectric output together with the mechanical strength of the gradient structure are verified from both the experimental and simulation results. Ascribed to a unique three-dimensional gradient distribution, the prepared PMN-PT/PVDF nanocomposite exhibits an excellent mechanical strength (830 MPa) and piezoelectric performance (1.08 V), which are substantially higher than those of a randomly dispersed nanocomposite. The enhancement mechanism is revealed in terms of polarization, stress and crystallinity. These results of the gradient structure offer new opportunities to understand the structure-related mechanical and electrical behaviors of a nanocomposite, and support the design of a nanocomposite with overall performance.

Enhanced Electrocaloric Effect of Lead Scandium Tantalate by Zirconium Doping

The electrocaloric effect (ECE) is a novel technology that offers high efficiency and environmental friendliness, making it suitable for solid-state refrigeration applications. Among the extensively studied ECE materials, lead scandium tantalate (PST) stands out for its excellent performance. However, its applications are restricted by its narrow working temperature range. To overcome this limitation, we explore the enhancement of the ECE through zirconium ion doping. We synthesized PbSc0.5-0.5xTa0.5-0.5xZrxO3 samples (x = 0, 0.025, 0.05, 0.075). The introduction of zirconium ions led to an increase in the Curie temperature from 28.9 °C (x = 0) to 55.5 °C (x = 0.075). Additionally, the relaxation factor γ of the ceramics increased from 1.40 (x = 0) to 1.59 (x = 0.075). The temperature span (Tspan) exhibited a rising trend with increasing x, reaching 10.9 K at x = 0.075. The maximum temperature change (ΔTmax) was observed at x = 0.025, with a value of 1.94 K. X-ray diffraction (XRD) patterns revealed that zirconium ion doping influenced the B-site ordering degree, thereby regulating the ECE. To further validate the results, we employed direct measurements and thermodynamic calculations. Overall, the regulation of ionic ordering through zirconium doping effectively enhances the ECE performance. These findings contribute to the development of advanced materials for solid-state refrigeration technologies.

Smart and Multifunctional Materials Based on Electroactive Poly(vinylidene fluoride): Recent Advances and Opportunities in Sensors, Actuators, Energy, Environmental, and Biomedical Applications

From scientific and technological points of view, poly(vinylidene fluoride), PVDF, is one of the most exciting polymers due to its overall physicochemical characteristics. This polymer can crystalize into five crystalline phases and can be processed in the form of films, fibers, membranes, and specific microstructures, being the physical properties controllable over a wide range through appropriate chemical modifications. Moreover, PVDF-based materials are characterized by excellent chemical, mechanical, thermal, and radiation resistance, and for their outstanding electroactive properties, including high dielectric, piezoelectric, pyroelectric, and ferroelectric response, being the best among polymer systems and thus noteworthy for an increasing number of technologies. This review summarizes and critically discusses the latest advances in PVDF and its copolymers, composites, and blends, including their main characteristics and processability, together with their tailorability and implementation in areas including sensors, actuators, energy harvesting and storage devices, environmental membranes, microfluidic, tissue engineering, and antimicrobial applications. The main conclusions, challenges and future trends concerning materials and application areas are also presented.

Intrinsically elastic polymer ferroelectric by precise slight cross-linking

Ferroelectrics are an integral component of the modern world and are of importance in electrics, electronics, and biomedicine. However, their usage in emerging wearable electronics is limited by inelastic deformation. We developed intrinsically elastic ferroelectrics by combining ferroelectric response and elastic resilience into one material by slight cross-linking of plastic ferroelectric polymers. The precise slight cross-linking can realize the complex balance between crystallinity and resilience. Thus, we obtained an elastic ferroelectric with a stable ferroelectric response under mechanical deformation up to 70% strain. This elastic ferroelectric exerts potentials in applications related to wearable electronics, such as elastic ferroelectric sensors, information storage, and energy transduction.

High-performance multimode elastocaloric cooling system

Developing zero-global warming potential refrigerants has emerged as one area that helps address global climate change concerns. Various high-efficiency caloric cooling techniques meet this goal, but scaling them up to technologically meaningful performance remains challenging. We have developed an elastocaloric cooling system with a maximum cooling power of 260 watts and a maximum temperature span of 22.5 kelvin. These values are among the highest reported for any caloric cooling system. Its key feature is the compression of fatigue-resistant elastocaloric nitinol (NiTi) tubes configured in a versatile multimode heat exchange architecture, which allows the harnessing of both high delivered cooling power and large temperature spans. Our system shows that elastocaloric cooling, which only emerged 8 years ago, is a promising direction for commercializing caloric cooling.

Fluoropolymer ferroelectrics: Multifunctional platform for polar-structured energy conversion

Ferroelectric materials are currently some of the most widely applied material systems and are constantly generating improved functions with higher efficiencies. Advancements in poly(vinylidene fluoride) (PVDF)-based polymer ferroelectrics provide flexural, coupling-efficient, and multifunctional material platforms for applications that demand portable, lightweight, wearable, and durable features. We highlight the recent advances in fluoropolymer ferroelectrics, their energetic cross-coupling effects, and emerging technologies, including wearable, highly efficient electromechanical actuators and sensors, electrocaloric refrigeration, and dielectric devices. These developments reveal that the molecular and nanostructure manipulations of the polarization-field interactions, through facile defect biasing, could introduce enhancements in the physical effects that would enable the realization of multisensory and multifunctional wearables for the emerging immersive virtual world and smart systems for a sustainable future.

An Active Pixel-Matrix Electrocaloric Device for Targeted and Differential Thermal Management

More than 55% of electronic failures are caused by damage from localized overheating. Up to now, there is still no efficient method for targeted temperature control against localized overheating. Although some existing thermal management devices handle this issue by full coverage cooling, it generates a lot of useless energy consumption. Here, a highly efficient pixel-matrix electrocaloric (EC) cooling device is reported, which can realize a targeted and differential thermal management. The modified poly(vinylidene fluoride-tertrifluoroethylene-chlorofluoroethylene) reaches a large adiabatic temperature change of 7.8 K and is more suitable for thermal transfer and electrostatic actuation at high frequencies. All active pixels in the EC cooling device exhibit a stable temperature span of 4.6 K and a heat flux of 62 mW cm^-2 , which is more than twice that of the one-layer EC device. Each refrigeration pixel can be independently controlled and effectively cooled down the localized overheating site(s) in situ. The surface temperature of the simulated central processing unit decreases by 33.2 K at 120 s after applying this EC device. Such a compact, embeddable, low cost, and active solid-state pixel-matrix cooling device has great potential for localized overheating protection in microelectronics.

Giant electrocaloric effect in a molecular ceramic

The electrocaloric effect (ECE) is an efficient and environmentally friendly method for solid-state refrigeration driven by an electric field. However, disregarding the ECE performance, the mass of materials also limits the amount of energy transferred in the cooling process. While molecular ECE materials have been attracting intensive attention with their excellent ECE properties, most reported molecular compounds can only be utilized in the form of thin films or single crystals. Unlike inorganic ceramics, molecular thin films and single crystals are very difficult to prepare in a large amount, which greatly restrains the future application of those materials. In this work, we report an excellent molecular ECE material in the form of polycrystalline molecular ceramics. Such molecular ceramics are composed of plastic molecular ferroelectrics, and can fulfil the requirement of large mass, easy processing, excellent performance and low energy consumption. Our molecular ceramic of HQReO₄ (HQ: protonated quinuclidine) demonstrates an isothermal entropy change of 5.8 J K^-1 kg^-1 and an adiabatic temperature change of 3.1 K. Notably, by a simple low-temperature pressing process without added adhesives (about 373 K), an HQReO₄ molecular ceramic block can be obtained, and its ECE performance is observed to be comparable to that of single crystals, for the first time. This work proposes a new application form for molecular electrocaloric materials, which opens up new ideas for solid-state refrigeration.

A colossal barocaloric effect induced by the creation of a high-pressure phase

As a promising environment-friendly alternative to current vapor-compression refrigeration, solid-state refrigeration based on the barocaloric effect has been attracting worldwide attention. Generally, both phases in which a barocaloric effect occurs are present at ambient pressure. Here, instead, we demonstrate that KPF₆ exhibits a colossal barocaloric effect due to the creation of a high-pressure rhombohedral phase. The phase diagram is constructed based on pressure-dependent calorimetric, Raman scattering, and neutron diffraction measurements. The present study is expected to provide an alternative routine to colossal barocaloric effects through the creation of a high-pressure phase.

High-Entropy Microdomain Interlocking Polymer Electrolytes for Advanced All-Solid-State Battery Chemistries

All-solid-state polymer electrolytes (ASPEs) with excellent processivity are considered one of the most forward-looking materials for large-scale industrialization. However, the contradiction between improving the mechanical strength and accelerating the ionic migration of ASPEs has always been difficult to reconcile. Herein, a rational concept is raised of high-entropy microdomain interlocking ASPEs (HEMI-ASPEs), inspired by entropic elasticity well-known in polymer and biochemical sciences, by introducing newly designed multifunctional ABC miktoarm star terpolymers into polyethylene oxide for the first time. The tailor-made HEMI-ASPEs possess multifunctional polymer chains, which induce themselves to assemble into micro- and nanoscale dynamic interlocking networks with high topological structure entropy. HEMI-ASPEs achieve excellent toughness, considerable ionic conductivity, an appreciable lithium transference number (0.63), and desirable thermal stability (T_d  > 400 °C) for all-solid-state lithium metal batteries. The Li|HEMI-ASPE-Li|Li symmetrical cell shows a stable Li plating/stripping performance over 4000 h, and a LiFePO₄ |HEMI-ASPE-Li|Li full cell exhibits a high capacity retention (≈96%) after 300 cycles. This work contributes an innovative design concept introducing high-entropy supramolecular dynamic networks for ASPEs.

Ionocaloric refrigeration cycle

Developing high-efficiency cooling with safe, low-global warming potential refrigerants is a grand challenge for tackling climate change. Caloric effect-based cooling technologies, such as magneto- or electrocaloric refrigeration, are promising but often require large applied fields for a relatively low coefficient of performance and adiabatic temperature change. We propose using the ionocaloric effect and the accompanying thermodynamic cycle as a caloric-based, all-condensed-phase cooling technology. Theoretical and experimental results show higher adiabatic temperature change and entropy change per unit mass and volume compared with other caloric effects under low applied field strengths. We demonstrated the viability of a practical system using an ionocaloric Stirling refrigeration cycle. Our experimental results show a coefficient of performance of 30% relative to Carnot and a temperature lift as high as 25°C using a voltage strength of ~0.22 volts.

Giant Negative Electrocaloric Effect over an Ultra-Wide Temperature Region in Relaxation Frozen State Ferroelectrics

A giant negative electrocaloric effect with the electrocaloric temperature change range from -27.3 to -9.8 K over an ultra-wide temperature region of 260 K (-180 to 80 °C) is obtained in a relaxation frozen state ferroelectric film of Bi₅Ti₃AlO₁₅. A strategy is proposed to extend the temperature region of the electrocaloric effect by gradually slowing and locally freezing the relaxation dynamics. The slow and frozen nanodomains below freezing temperature T_f of ∼80 °C do not yield to the applied electric field but are noncolinear to the field, which results in an inverse configuration entropy change and negative electrocaloric effect over an ultra-wide temperature region in frozen relaxor state ferroelectric films. A semiphenomenological model based on modified Ginzburg-Landau-Devonshire theory is presented to reveal the evolution of the slowing and freezing of the nanodomains. The breakthroughs in the operating temperature region and cooling temperature change make relaxation frozen state ferroelectrics excellent electrocaloric refrigeration materials.

Electrocaloric Effect in Different Oriented BaZr0.15Ti0.85O3 Single Crystals

The electrocaloric effect of ferroelectrics is promising for new solid-state refrigeration. However, the current research on the electrocaloric effect of bulk ferroelectrics mainly focuses on (001) orientation. Thus, we studied the electrocaloric effect of BaZr0.15Ti0.85O3 single crystals with different orientations through the nonlinear thermodynamic approach and entropy analysis. The results show that the dipolar entropy of (111)-oriented BaZr0.15Ti0.85O3 single crystals exhibits a greater change after applying an external electric field, compared with (001)- and (110)-orientations, and the (001)-oriented electrocaloric responses are consistent with experimental observations. The (111)-oriented BaZr0.15Ti0.85O3 single crystals have a more significant electrocaloric response, resulting in a broader work temperature range with a large electrocaloric effect. These insights offer an alternative way to enhance the electrocaloric response of ferroelectric single crystals.

Thermal management of chips by a device prototype using synergistic effects of 3-D heat-conductive network and electrocaloric refrigeration

With speeding up development of 5 G chips, high-efficient thermal structure and precise management of tremendous heat becomes a substantial challenge to the power-hungry electronics. Here, we demonstrate an interpenetrating architecture of electrocaloric polymer with highly thermally conductive pathways that achieves a 240% increase in the electrocaloric performance and a 300% enhancement in the thermal conductivity of the polymer. A scaled-up version of the device prototype for a single heat spot cooling of 5 G chip is fabricated utilizing this electrocaloric composite and electromagnetic actuation. The continuous three-dimensional (3-D) thermal conductive network embedded in the polymer acts as nucleation sites of the ordered dipoles under applied electric field, efficiently collects thermal energy at the hot-spots arising from field-driven dipolar entropy change, and opens up the high-speed conduction path of phonons. The synergy of two components, thus, tackles the challenge of sluggish heat dissipation of the electroactive polymers and their contact interfaces with low thermal conductivity, and more importantly, significantly reduces the electric energy for switching the dipolar states during the electrocaloric cycles, and increases the manipulable entropy at the low fields. Such a feasible solution is inevitable to the precisely fixed-point thermal management of next-generation smart microelectronic devices.

Efficient thermal structure and precise heat management become a substantial challenge for electronics. Here, authors utilize the synergistic effect of classic heat transfer and electrocaloric cooling for fixed-point thermal management of chips.

Giant Room-Temperature Electrocaloric Effect of Polymer-Ceramic Composites with Orientated BaSrTiO3 Nanofibers

Cooling based on the electrocaloric effect (ECE) is a promising solution to environmental and energy efficiency problems of vapor-compression refrigeration. Ferroelectric polymer-ceramics nanocomposites, integrating high electric breakdown of organic ferroelectrics and large EC strength of ceramics, are attractive EC materials. Here, we tuned the orientation of Ba_0.67Sr_0.33TiO₃ nanofibers (BST nfs) in the P(VDF-TrFE-CFE) polymer. When the nfs were aligned parallel to the field, a ΔT of 11.3 K with an EC strength of 0.16 K·m/MV was achieved in the blends. The EC strength not only surpasses advanced nanocomposites but also is comparable to ferroelectric ceramics. The simulation indicates that a significantly higher electric field is concentrated in polymer regions around the ends of the orientated nfs, contributing to easier flipping of polymer chains for large ECE. This work provides a new method to obtain large ECE in composites for next-generation refrigeration.

Bimodal-Structured 0.9KNbO3-0.1BaTiO3 Solid Solutions with Highly Enhanced Electrocaloric Effect at Room Temperature

0.9KNbO3-0.1BaTiO3 ceramics, with a bimodal grain size distribution and typical tetragonal perovskite structure at room temperature, were prepared by using an induced abnormal grain growth (IAGG) method at a relatively low sintering temperature. In this bimodal grain size distribution structure, the extra-large grains (~10–50 μm) were evolved from the micron-sized filler powders, and the fine grains (~0.05–0.35 μm) were derived from the sol precursor matrix. The 0.9KNbO3-0.1BaTiO3 ceramics exhibit relaxor-like behavior with a diffused phase transition near room temperature, as confirmed by the presence of the polar nanodomain regions revealed through high resolution transmission electron microscope analyses. A large room-temperature electrocaloric effect (ECE) was observed, with an adiabatic temperature drop (ΔT) of 1.5 K, an isothermal entropy change (ΔS) of 2.48 J·kg−1·K−1, and high ECE strengths of |ΔT/ΔE| = 1.50 × 10−6 K·m·V−1 and ΔS/ΔE = 2.48 × 10−6 J·m·kg−1·K−1·V−1 (directly measured at E = 1.0 MV·m−1). These greatly enhanced ECEs demonstrate that our simple IAGG method is highly appreciated for synthesizing high-performance electrocaloric materials for efficient cooling devices.

Tauopathies: new perspectives and challenges

BACKGROUND

Tauopathies are a class of neurodegenerative disorders characterized by neuronal and/or glial tau-positive inclusions.

MAIN BODY

Clinically, tauopathies can present with a range of phenotypes that include cognitive/behavioral-disorders, movement disorders, language disorders and non-specific amnestic symptoms in advanced age. Pathologically, tauopathies can be classified based on the predominant tau isoforms that are present in the inclusion bodies (i.e., 3R, 4R or equal 3R:4R ratio). Imaging, cerebrospinal fluid (CSF) and blood-based tau biomarkers have the potential to be used as a routine diagnostic strategy and in the evaluation of patients with tauopathies. As tauopathies are strongly linked neuropathologically and genetically to tau protein abnormalities, there is a growing interest in pursuing of tau-directed therapeutics for the disorders. Here we synthesize emerging lessons on tauopathies from clinical, pathological, genetic, and experimental studies toward a unified concept of these disorders that may accelerate the therapeutics.

CONCLUSIONS

Since tauopathies are still untreatable diseases, efforts have been made to depict clinical and pathological characteristics, identify biomarkers, elucidate underlying pathogenesis to achieve early diagnosis and develop disease-modifying therapies.