Chemistry governs water organization at a graphene electrode

Biogeochemical factors regulating photosynthetically dissolved organic carbon produced by phytoplankton in the Taiwan Strait

The distribution and mechanisms of photosynthetically dissolved organic carbon (PDOC) released by marine phytoplankton are frequently neglected and inadequately understood because most studies on carbon sequestration capacity have focused on photosynthetic particulate organic carbon. In this study, percentage extracellular release (PER) and its environmental influencing factors were investigated for 10 cruises in the Taiwan Strait during 2006-2023. The results indicated that the PER increased horizontally from the nearshore to the off-shelf and vertically from the surface to the bottom within the euphotic zone. PER tends to be low in eutrophic waters such as upwellings and estuaries and high in oligotrophic waters. The study revealed that the average contribution of PDOC to total primary productivity (TPP) in the Taiwan Strait could reach 18.2 ± 11.7%, which is similar to the previously estimated global oceanic values. PDOC production satisfied approximately 25% the carbon requirements of heterotropic bacteria (HB). A detailed analysis of the PER combined with model simulations proved that the distribution of the PER in the Taiwan Strait was caused by the joint contribution of irradiance, size-fractionated phytoplankton, and nutrient stoichiometry. Our results contradict the view that the PER is a constant factor that is unaffected by TPP. However, there was a significant negative correlation between the PER and TPP. The PDOC was always lower than the bacterial carbon demand for a broad range of bacterial growth efficiencies, suggesting a weak coupling between phytoplankton exudation and bacterial metabolism. This challenges the idea that there is a well-coupled relationship between bacteria and phytoplankton present on the continental shelf. These findings indicate significant discrepancies in PDOC mechanisms and the quantitative importance of nearshore eutrophic and off-shelf oligotrophic environments. Consequently, it is unwise to use uniform PERs without differentiation under trophic conditions when reevaluating and appraising marine carbon fixation.

Experimental and simulation-based characterization of surfactant adsorption layers at fluid interfaces

Adsorption of surfactants to fluid interfaces occurs in numerous technological and daily-life contexts. The coverage at the interface and other properties of the formed adsorption layers determine the performance of a surfactant with regard to the desired application. Given the importance of these applications, there is a great demand for the comprehensive characterization and understanding of surfactant adsorption layers. In this review, we provide an overview of suitable experimental and simulation-based techniques and review the literature in which they were used for the investigation of surfactant adsorption layers. We come to the conclusion that, while these techniques have been successfully applied to investigate Langmuir monolayers of water-insoluble surfactants, their application to the study of Gibbs adsorption layers of water-soluble surfactants has not been fully exploited. Finally, we emphasize the great potential of these methods in providing a deeper understanding of the behavior of soluble surfactants at interfaces, which is crucial for optimizing their performance in various applications.

Heterodyne-Detected Sum-Frequency Generation Vibrational Spectroscopy Reveals Aqueous Molecular Structure at the Suspended Graphene/Water Interface

Graphene, a transparent two-dimensional conductive material, has brought extensive new perspectives and prospects to various aqueous technological systems, such as desalination membranes, chemical sensors, energy storage, and energy conversion devices. Yet, the molecular-level details of graphene in contact with aqueous electrolytes, such as water orientation and hydrogen bond structure, remain elusive or controversial. Here, we employ surface-specific heterodyne-detected sum-frequency generation (HD-SFG) vibrational spectroscopy to re-examine the water molecular structure at a freely suspended graphene/water interface. We compare the response from the air/graphene/water system to that from the air/water interface. Our results indicate that theχ y y z 2 ${{\chi }_{yyz}^{\left(2\right)}}$ spectrum recorded from the air/graphene/water system arises from the topmost 1-2 water layers in contact with the graphene, with the graphene itself not generating a significant SFG response. Compared to the air/water interface response, the presence of monolayer graphene weakly affects the interfacial water. Graphene weakly affects the dangling O-H group, lowering its frequency through its interaction with the graphene sheet, and has a very small effect on the hydrogen-bonded O-H group. Molecular dynamics simulations confirm our experimental observation. Our work provides molecular insight into the interfacial structure at a suspended graphene/water interface, relevant to various technological applications of graphene.

Aqueous chemimemristor based on proton-permeable graphene membranes

Memristive devices, electrical elements whose resistance depends on the history of applied electrical signals, are leading candidates for future data storage and neuromorphic computing. Memristive devices typically rely on solid-state technology, while aqueous memristive devices are crucial for biology-related applications such as next-generation brain-machine interfaces. Here, we report a simple graphene-based aqueous memristive device with long-term and tunable memory regulated by reversible voltage-induced interfacial acid-base equilibria enabled by selective proton permeation through the graphene. Surface-specific vibrational spectroscopy verifies that the memory of the graphene resistivity arises from the hysteretic proton permeation through the graphene, apparent from the reorganization of interfacial water at the graphene/water interface. The proton permeation alters the surface charge density on the CaF2 substrate of the graphene, affecting graphene's electron mobility, and giving rise to synapse-like resistivity dynamics. The results pave the way for developing experimentally straightforward and conceptually simple aqueous electrolyte-based neuromorphic iontronics using two-dimensional (2D) materials.

Water dynamics and sum-frequency generation spectra at electrode/aqueous electrolyte interfaces

The dynamics of water at interfaces between an electrode and an electrolyte is essential for the transport of redox species and for the kinetics of charge transfer reactions next to the electrode. However, while the effects of electrode potential and ion concentration on the electric double layer structure have been extensively studied, a comparable understanding of dynamical aspects is missing. Interfacial water dynamics presents challenges since it is expected to result from the complex combination of water-water, water-electrode and water-ion interactions. Here we perform molecular dynamics simulations of aqueous NaCl solutions at the interface with graphene electrodes, and examine the impact of both ion concentration and electrode potential on interfacial water reorientational dynamics. We show that for all salt concentrations water dynamics exhibits strongly asymmetric behavior: it slows down at increasingly positively charged electrodes but it accelerates at increasingly negatively charged electrodes. At negative potentials water dynamics is determined mostly by the electrode potential value, but in contrast at positive potentials it is governed both by ion-water and electrode-water interactions. We show how these strikingly different behaviors are determined by the interfacial hydrogen-bond network structure and by the ions' surface affinity. Finally, we indicate how the structural rearrangements impacting water dynamics can be probed via vibrational sum-frequency generation spectroscopy.

Substrate effect on charging of electrified graphene/water interfaces

Graphene, a transparent two-dimensional (2D) conductive electrode, has brought extensive new perspectives and prospects to electrochemical systems, such as chemical sensors, energy storage, and energy conversion devices. In many of these applications, graphene, supported on a substrate, is in contact with an aqueous solution. An increasing number of studies indicate that the substrate, rather than graphene, determines the organization of water in contact with graphene, i.e., the electric double layer (EDL) structure near the electrified graphene, and the wetting behavior of the graphene: the graphene sheet is transparent in terms of its supporting substrate. By applying surface-specific heterodyne-detected sum-frequency generation (HD-SFG) spectroscopy to the silicon dioxide (SiO2)-supported graphene electrode/aqueous electrolyte interface and comparing the data with those for the calcium fluoride (CaF2)-supported graphene [Y. Wang et al., Angew. Chem., Int. Ed., 2023, 62, e202216604], we discuss the impact of the different substrates on the charging of both the graphene and the substrate upon applying potentials. The SiO2-supported graphene shows pseudocapacitive behavior, consistent with the CaF2-supported graphene case, although the surface charges on SiO2 and CaF2 differ substantially. The SiO2 surface is already negatively charged at +0.57 V (vs. Pd/H2), and the negative surface charge is doubled when negative potentials are applied, in contrast with the CaF2 case, where the positive charge is reduced when negative potentials are applied. Interestingly, the charging of the graphene sheet is almost identical between the negatively charged SiO2 surface and positively charged CaF2 surface, demonstrating that the graphene charging is decoupled from the charging of the substrates.

The many ways in which alphaviruses bind to cells

Only a subset of viruses can productively infect many different host species. Some arthropod-transmitted viruses, such as alphaviruses, can infect invertebrate and vertebrate species including insects, reptiles, birds, and mammals. This broad tropism may be explained by their ability to engage receptors that are conserved across vertebrate and invertebrate classes. Through several genome-wide loss-of-function screens, new alphavirus receptors have been identified, some of which bind to multiple related viruses in different antigenic complexes. Structural analysis has revealed that distinct sites on the alphavirus glycoprotein can mediate receptor binding, which opposes the idea that a single receptor-binding site mediates viral entry. Here, we discuss how different paradigms of receptor engagement on cells might explain the promiscuity of alphaviruses for multiple hosts.

Phase-engineering compact and flexible CsPbBr3 microcrystal films for robust X-ray detection

All-inorganic CsPbBr3 perovskites have gained significant attention due to their potential in direct X-ray detection. The fabrication of stable, pinhole-free thick films remains challenging, hindering their integration in durable, large-area high-resolution devices. In this study, we propose a facile strategy using a non-conductive polymer to create a flexible, compact thick film under ambient conditions. Furthermore, we investigate the effect of introducing the 2D CsPb2Br5 phase into CsPbBr3 perovskite crystals on their photophysical properties and charge transport. Upon X-ray exposure, the devices consisting of the dual phase exhibit improved stability and more effective operation at higher voltages. Rietveld refinement shows that, due to the presence of the second phase, local distortions and Pb-vacancies are introduced within the CsPbBr3 lattice. This in turn presumably increases the ion migration energy barrier, resulting in a very low dark current and hence, enhanced stability. This feature might benefit local charge extraction and, ultimately, the X-ray image resolution. These findings also suggest that introducing a second phase in the perovskite structure can be advantageous for efficient photon-to-charge carrier conversion, as applied in medical imaging.

Aqueous Interfaces in Chemical Separations

Chemical separations play a vital role in refinery and reprocessing of critical materials, such as platinum group metals, rare earths, and actinides. The choice of separation system─whether it is liquid-liquid extraction (LLE), sorbents, or membranes─depends on specific needs and applications. In almost all separation processes, the desired metal ions adsorb or transfer across an aqueous interface, such as the solid/liquid interface in sorbents or oil/water interfaces in LLE. Despite these separation technologies being extensively used for decades, our understanding of the molecular-scale mechanisms governing ion adsorption and transport at interfaces remains limited. This knowledge gap presents a significant challenge in meeting the increasing demands for these critical materials due to their growing use in advanced technologies. Fortunately, recent advancements in surface-specific experimental and computational techniques offer promising avenues to bridge this gap and facilitate the development of next-generation separation systems. Interestingly, unanswered questions regarding interfacial phenomena in chemical separations hold great relevance to various fields, including energy storage, geochemistry, and atmospheric chemistry. Therefore, the model interfacial systems developed for studying chemical separations, such as amphiphilic molecules assembled at a solid/water, air/water, or oil/water interface, may have far-reaching implications, extending beyond separations and opening doors to addressing a wide range of scientific inquiries. This perspective discusses recent interfacial studies elucidating amphiphile-ion interactions in chemical separations of metal ions. These studies provide direct, molecular-scale information about solute and solvent behavior at aqueous interfaces, including multivalent and complex ions in highly concentrated solutions, which play key roles in LLE of critical materials.

Ion and water adsorption to graphene and graphene oxide surfaces

Graphene and graphene oxide (GO) are two particularly promising nanomaterials for a range of applications including energy storage, catalysis, and separations. Understanding the nanoscale interactions between ions and water near graphene and GO surfaces is critical for advancing our fundamental knowledge of these systems and downstream application success. This minireview highlights the necessity of using surface-specific experimental probes and computational techniques to fully characterize these interfaces, including the nanomaterial, surrounding water, and any adsorbed ions, if present. Key experimental and simulation studies considering water and ion structures near both graphene and GO are discussed. The major findings are: water forms 1-3 hydration layers near graphene; ions adsorb electrostatically to graphene under an applied potential; the chemical and physical properties of GO vary considerably depending on the synthesis route; and these variations influence water and ion adsorption to GO. Lastly, we offer outlooks and perspectives for these research areas.

Potential Biomedical Limitations of Graphene Nanomaterials

Graphene-family nanomaterials (GFNs) possess mechanical stiffness, optical properties, and biocompatibility making them promising materials for biomedical applications. However, to realize the potential of graphene in biomedicine, it must overcome several challenges that arise when it enters the body's circulatory system. Current research focuses on the development of tumor-targeting devices using graphene, but GFNs accumulated in different tissues and cells through different pathways, which can cause toxic reactions leading to cell apoptosis and body dysfunction when the accumulated amount exceeds a certain limit. In addition, as a foreign substance, graphene can induce complex inflammatory reactions with immune cells and inflammatory factors, potentially enhancing or impairing the body's immune function. This review discusses the biomedical applications of graphene, the effects of graphene materials on human immune function, and the biotoxicity of graphene materials.