A perfusable, multifunctional epicardial device improves cardiac function and tissue repair

Mechanically skin-like and water-resistant self-healing bioelastomer for high-tension wound healing

The biomedical application of self-healing materials in wet or (under)water environments is quite challenging because the insulation and dissociation effects of water molecules significantly reduce the reconstruction of material-interface interactions. Rapid closure with uniform tension of high-tension wounds is often difficult, leading to further deterioration and scarring. Herein, a new type of thermosetting water-resistant self-healing bioelastomer (WRSHE) was designed by synergistically incorporating a stable polyglycerol sebacate (PGS) covalent crosslinking network and triple hybrid dynamic networks consisting of reversible disulfide metathesis (SS), and dimethylglyoxime urethane (Dou) and hydrogen bonds. And a resveratrol-loaded WRSHE (Res@WRSHE) was developed by a swelling, absorption, and crosslinked network locking strategy. WRSHEs exhibited skin-like mechanical properties in terms of nonlinear modulus behavior, biomimetic softness, high stretchability, and good elasticity, and they also achieved ultrafast and highly efficient self-healing in various liquid environments. For wound-healing applications of high-tension full-thickness skin defects, the convenient surface assembly by self-healing of WRSHEs provides uniform contraction stress to facilitate tight closure. Moreover, Res@WRSHEs gradually release resveratrol, which helps inflammatory response reduction, promotes blood vessel regeneration, and accelerates wound repair.

Advanced Cardiac Patches for the Treatment of Myocardial Infarction

Myocardial infarction is a cardiovascular disease characterized by a high incidence rate and mortality. It leads to various cardiac pathophysiological changes, including ischemia/reperfusion injury, inflammation, fibrosis, and ventricular remodeling, which ultimately result in heart failure and pose a significant threat to global health. Although clinical reperfusion therapies and conventional pharmacological interventions improve emergency survival rates and short-term prognoses, they are still limited in providing long-lasting improvements in cardiac function or reversing pathological progression. Recently, cardiac patches have gained considerable attention as a promising therapy for myocardial infarction. These patches consist of scaffolds or loaded therapeutic agents that provide mechanical reinforcement, synchronous electrical conduction, and localized delivery within the infarct zone to promote cardiac restoration. This review elucidates the pathophysiological progression from myocardial infarction to heart failure, highlighting therapeutic targets and various cardiac patches. The review considers the primary scaffold materials, including synthetic, natural, and conductive materials, and the prevalent fabrication techniques and optimal properties of the patch, as well as advanced delivery strategies. Last, the current limitations and prospects of cardiac patch research are considered, with the goal of shedding light on innovative products poised for clinical application.

A mechanical-assisted post-bioprinting strategy for challenging bone defects repair

Bioprinting that can synchronously deposit cells and biomaterials has lent fresh impetus to the field of tissue regeneration. However, the unavoidable occurrence of cell damage during fabrication process and intrinsically poor mechanical stability of bioprinted cell-laden scaffolds severely restrict their utilization. As such, on basis of heart-inspired hollow hydrogel-based scaffolds (HHSs), a mechanical-assisted post-bioprinting strategy is proposed to load cells into HHSs in a rapid, uniform, precise and friendly manner. HHSs show mechanical responsiveness to load cells within 4 s, a 13-fold increase in cell number, and partitioned loading of two types of cells compared with those under static conditions. As a proof of concept, HHSs with the loading cells show an enhanced regenerative capability in repair of the critical-sized segmental and osteoporotic bone defects in vivo. We expect that this post-bioprinting strategy can provide a universal, efficient, and promising way to promote cell-based regenerative therapy.

Degradable biomedical elastomers: paving the future of tissue repair and regenerative medicine

Degradable biomedical elastomers (DBE), characterized by controlled biodegradability, excellent biocompatibility, tailored elasticity, and favorable network design and processability, have become indispensable in tissue repair. This review critically examines the recent advances of biodegradable elastomers for tissue repair, focusing mainly on degradation mechanisms and evaluation, synthesis and crosslinking methods, microstructure design, processing techniques, and tissue repair applications. The review explores the material composition and cross-linking methods of elastomers used in tissue repair, addressing chemistry-related challenges and structural design considerations. In addition, this review focuses on the processing methods of two- and three-dimensional structures of elastomers, and systematically discusses the contribution of processing methods such as solvent casting, electrostatic spinning, and three-/four-dimensional printing of DBE. Furthermore, we describe recent advances in tissue repair using DBE, and include advances achieved in regenerating different tissues, including nerves, tendons, muscle, cardiac, and bone, highlighting their efficacy and versatility. The review concludes by discussing the current challenges in material selection, biodegradation, bioactivation, and manufacturing in tissue repair, and suggests future research directions. This concise yet comprehensive analysis aims to provide valuable insights and technical guidance for advances in DBE for tissue engineering.

Nanoparticle-encapsulated retinoic acid for the modulation of bone marrow hematopoietic stem cell niche

More effective approaches are needed in the treatment of blood cancers, in particular acute myeloid leukemia (AML), that are able to eliminate resistant leukemia stem cells (LSCs) at the bone marrow (BM), after a chemotherapy session, and then enhance hematopoietic stem cell (HSC) engraftment for the re-establishment of the HSC compartment. Here, we investigate whether light-activatable nanoparticles (NPs) encapsulating all-trans-retinoic acid (RA+NPs) could solve both problems. Our in vitro results show that mouse AML cells transfected with RA+NPs differentiate towards antitumoral M1 macrophages through RIG.1 and OASL gene expression. Our in vivo results further show that mouse AML cells transfected with RA+NPs home at the BM after transplantation in an AML mouse model. The photo-disassembly of the NPs within the grafted cells by a blue laser enables their differentiation towards a macrophage lineage. This macrophage activation seems to have systemic anti-leukemic effect within the BM, with a significant reduction of leukemic cells in all BM compartments, of animals treated with RA+NPs, when compared with animals treated with empty NPs. In a separate group of experiments, we show for the first time that normal HSCs transfected with RA+NPs show superior engraftment at the BM niche than cells without treatment or treated with empty NPs. This is the first time that the activity of RA is tested in terms of long-term hematopoietic reconstitution after transplant using an in situ activation approach without any exogenous priming or genetic conditioning of the transplanted cells. Overall, the approach documented here has the potential to improve consolidation therapy in AML since it allows a dual intervention in the BM niche: to tackle resistant leukemia and improve HSC engraftment at the same time.

Design of a Zn-based nanozyme injectable multifunctional hydrogel with ROS scavenging activity for myocardial infarction therapy

The existing strategies for myocardial infarction therapy mainly focus on reinstating myocardial blood supply, often disregarding the intrinsic and intricate microenvironment created by elevated levels of reactive oxygen species (ROS) that accompanies myocardial infarction. This microenvironment entails cardiomyocytes apoptosis, substantial vascular cell death, excessive inflammatory infiltration and fibrosis. In such situation, the present study introduces a zinc-based nanozyme injectable multifunctional hydrogel, crafted from ZIF-8, to counteract ROS effects after myocardial infarction. The hydrogel exhibits both superoxide dismutase (SOD)-like and catalase (CAT)-like enzymatic activities, proficiently eliminating surplus ROS in the infarcted region and interrupting ROS-driven inflammatory cascades. Furthermore, the hydrogel's exceptional immunomodulatory ability spurs a notable transformation of macrophages into the M2 phenotype, effectively neutralizing inflammatory factors and indirectly fostering vascularization in the infarcted region. For high ROS and demanding for zinc of the infarcted microenvironment, the gradual release of zinc ions as the hydrogel degrades further enhances the bioactive and catalytic performance of the nanozymes, synergistically promoting cardiac function post myocardial infarction. In conclusion, this system of deploying catalytic nanomaterials within bioactive matrices for ROS-related ailment therapy not only establishes a robust foundation for biomedical material development, but also promises a holistic approach towards addressing myocardial infarction complexities. STATEMENT OF SIGNIFICANCE: Myocardial infarction remains the leading cause of death worldwide. However, the existing strategies for myocardial infarction therapy mainly focus on reinstating myocardial blood supply. These therapies often ignore the intrinsic and intricate microenvironment created by elevated levels of reactive oxygen species (ROS). Hence, we designed an injectable Zn-Based nanozyme hydrogel with ROS scavenging activity for myocardial infarction therapy. ALG-(ZIF-8) can significantly reduce ROS in the infarcted area and alleviate the ensuing pathological process. ALG-(ZIF-8) gradually releases zinc ions to participate in the repair process and improves cardiac function. Overall, this multifunctional hydrogel equipped with ZIF-8 makes full use of the characteristics of clearing ROS and slowly releasing zinc ions, and we are the first to test the therapeutic efficacy of Zinc-MOFs crosslinked-alginate hydrogel for myocardial infarction.

Electromechanical convective drug delivery devices for overcoming diffusion barriers

Drug delivery systems which rely on diffusion for mass transport, such as hydrogels and nanoparticles, have enhanced drug targeting and extended delivery profiles to improve health outcomes for patients suffering from diseases including cancer and diabetes. However, diffusion-dependent systems often fail to provide >0.01-1% drug bioavailability when transporting macromolecules across poorly permeable physiological tissues such as the skin, solid tumors, the blood-brain barrier, and the gastrointestinal walls. Convection-enabling robotic ingestibles, wearables, and implantables physically interact with tissue walls to improve bioavailability in these settings by multiple orders of magnitude through convective mass transfer, the process of moving drug molecules via bulk fluid flow. In this Review, we compare diffusive and convective drug delivery systems, highlight engineering techniques that enhance the efficacy of convective devices, and provide examples of synergies between the two methods of drug transport.

A Self-Homing and Traceable Cardiac Patch Leveraging Ferumoxytol for Spatiotemporal Therapeutic Delivery

Mesenchymal stem cell (MSC)-based cardiac patches are envisioned to be a promising treatment option for patients with myocardial infarction. However, their therapeutic efficacy and duration are hampered due to their limited retention on the epicardium. We engineered a scaffold-free MSC sheet with an inherent ability to migrate into the infarcted myocardium, a strategy enabled by actively establishing a sustained intracellular hypoxic environment through the endocytosis of our FDA-approved ferumoxytol. This iron oxide nanoparticle stabilized hypoxia-induced factor-1α, triggering upregulation of the CXC chemokine receptor and subsequent MSC chemotaxis. Thus, MSCs integrated into 2/3 depth of the left ventricular anterior wall in a rat model of acute myocardial infarction and persisted for at least 28 days. This led to spatiotemporal delivery of paracrine factors by MSCs, enhancing cardiac regeneration and function. Ferumoxytol also facilitated the noninvasive MRI tracking of implanted MSCs. Our approach introduces a strategy for mobilizing MSC migration, holding promise for rapid clinical translation in myocardial infarction treatment.

Advances in the Generation of Constructed Cardiac Tissue Derived from Induced Pluripotent Stem Cells for Disease Modeling and Therapeutic Discovery

The human heart lacks significant regenerative capacity; thus, the solution to heart failure (HF) remains organ donation, requiring surgery and immunosuppression. The demand for constructed cardiac tissues (CCTs) to model and treat disease continues to grow. Recent advances in induced pluripotent stem cell (iPSC) manipulation, CRISPR gene editing, and 3D tissue culture have enabled a boom in iPSC-derived CCTs (iPSC-CCTs) with diverse cell types and architecture. Compared with 2D-cultured cells, iPSC-CCTs better recapitulate heart biology, demonstrating the potential to advance organ modeling, drug discovery, and regenerative medicine, though iPSC-CCTs could benefit from better methods to faithfully mimic heart physiology and electrophysiology. Here, we summarize advances in iPSC-CCTs and future developments in the vascularization, immunization, and maturation of iPSC-CCTs for study and therapy.

Review of electrospun microtube array membrane (MTAM)-a novel new class of hollow fiber for encapsulated cell therapy (ECT) in clinical applications

Encapsulated cell therapy (ECT) shows significant potential for treating neurodegenerative disorders including Alzheimer's and Parkinson's, which currently lack curative medicines and must be managed symptomatically. This novel technique encapsulates functional cells with a semi-permeable membrane, providing protection while enabling critical nutrients and therapeutic substances to pass through. Traditional ECT procedures, on the other hand, pose difficulties in terms of cell survival and retrieval. We introduce the Microtube Array Membrane (MTAM), a revolutionary technology that solves these constraints, in this comprehensive overview. Microtube Array Membrane has distinct microstructures that improve encapsulated cells' long-term viability by combining the advantages of macro and micron scales. Importantly, the MTAM platform improves biosafety by allowing the entire encapsulated unit to be retrieved in the event of an adverse reaction. Our findings show that MTAM-based ECT has a great potential in a variety of illness situations. For cancer treatment, hybridoma cells secreting anti-CEACAM 6 antibodies inhibit triple-negative breast cancer cell lines for an extended period of time. In animal brain models of Alzheimer's disease, hybridoma cells secreting anti-pTau antibodies successfully reduce pTau buildup, accompanied by improvements in memory performance. In mouse models, MTAM-encapsulated primary cardiac mesenchymal stem cells dramatically improve overall survival and heart function. These findings illustrate the efficacy and adaptability of MTAM-based ECT in addressing major issues such as immunological isolation, cell viability, and patient safety. We provide new possibilities for the treatment of neurodegenerative illnesses and other conditions by combining the potential of ECT with MTAM. Continued research and development in this subject has a lot of promise for developing cell therapy and giving hope to people suffering from chronic diseases.

Hydrogels with tunable mechanical plasticity regulate endothelial cell outgrowth in vasculogenesis and angiogenesis

The endothelial cell (EC) outgrowth in both vasculogenesis and angiogenesis starts with remodeling surrounding matrix and proceeds with the crosstalk between cells for the multicellular vasculature formation. The mechanical plasticity of matrix, defined as the ability to permanently deform by external traction, is pivotal in modulating cell behaviors. Nevertheless, the implications of matrix plasticity on cell-to-cell interactions during EC outgrowth, along with the molecular pathways involved, remain elusive. Here we develop a collagen-hyaluronic acid based hydrogel platform with tunable plasticity by using compositing strategy of dynamic and covalent networks. We show that although the increasing plasticity of the hydrogel facilitates the matrix remodeling by ECs, the largest tubular lumens and the longest invading distance unexpectedly appear in hydrogels with medium plasticity instead of the highest ones. We unravel that the high plasticity of the hydrogels promotes stable integrin cluster of ECs and recruitment of focal adhesion kinase with an overenhanced contractility which downregulates the vascular endothelial cadherin expression and destabilizes the adherens junctions between individual ECs. Our results, further validated with mathematical simulations and in vivo angiogenic tests, demonstrate that a balance of matrix plasticity facilitates both cell-matrix binding and cell-to-cell adherens, for promoting vascular assembly and invasion.

An Intrinsically Magnetic Epicardial Patch for Rapid Vascular Reconstruction and Drug Delivery

Myocardial infarction (MI) is a major cause of mortality worldwide. The major limitation of regenerative therapy for MI is poor cardiac retention of therapeutics, which results from an inefficient vascular network and poor targeting ability. In this study, a two-layer intrinsically magnetic epicardial patch (MagPatch) prepared by 3D printing with biocompatible materials like poly (glycerol sebacate) (PGS) is designed, poly (ε-caprolactone) (PCL), and NdFeB. The two-layer structure ensured that the MagPatch multifariously utilized the magnetic force for rapid vascular reconstruction and targeted drug delivery. MagPatch accumulates superparamagnetic iron oxide (SPION)-labelled endothelial cells, instantly forming a ready-implanted organization, and rapidly reconstructs a vascular network anastomosed with the host. In addition, the prefabricated vascular network within the MagPatch allowed for the efficient accumulation of SPION-labelled therapeutics, amplifying the therapeutic effects of cardiac repair. This study defined an extendable therapeutic platform for vascularization-based targeted drug delivery that is expected to assist in the progress of regenerative therapies in clinical applications.

Hybrid Cross-Linking to Construct Functional Elastomers

ConspectusElastomers have been extensively used in diverse industrial sectors such as footwear, seals, tires, and cable jacketing and have attracted more and more attention in emerging fields such as regenerative medicine, soft robotics, and stretchable electronics. Global consumption of natural and synthetic elastomers amounted to nearly 27 million metric tons in 2020. In addition, to further enhance the common properties of elastomers, it is highly desired to endow elastomers with functionalities such as reprocessability, biomimetic mechanical properties, self-healing ability, bioactivity, and electrical conductivity, which will significantly broaden their applications. The covalent or noncovalent cross-linked structure is the essential factor for the elasticity of elastomers. Traditional elastomers usually comprise a single type of cross-linked molecular network, for which it is difficult to modulate the properties and introduce functionalities. Inspired by the simultaneous existence of multiple cross-linked structures in proteins, researchers have employed a hybrid cross-linking strategy to construct elastomers. Various noncovalent interactions (e.g., hydrogen bonds, metal-ligand coordination, ionic interactions, and chain folding) and dynamic covalent bonds (e.g., disulfide bonds, oxime-urethane bonds, and urea bonds) have been integrated in elastomers. Accordingly, the properties and functionalities of elastomers can be tuned by regulating the types, ratios, and distributions of cross-links. The hybrid cross-linking strategy provides a versatile and effective way to construct diverse functional elastomers for broad applications in various important fields.In this Account, we present our recent progress on functional elastomers constructed by a hybrid cross-linking strategy, including their design, preparation, properties, and diverse applications. First, we provide a brief introduction of the basic concept of functional elastomers and outline general strategies and mechanics for functional elastomers constructed by hybrid cross-linking. Then, we classify hybrid cross-linked elastomers by their design strategies, including multiple cross-linking, topological design, chemical coupling, and multiple networks. The relationships between the functionalities and hybrid cross-linked structures are summarized. At the same time, we also introduce diverse applications of these hybrid cross-linked elastomers in biomedicine, flexible electronics, soft robotics, 3D printing, and so on. Finally, we discuss our perspective on open challenges and future development trends of this rapidly evolving field. This Account highlighting the diverse hybrid cross-linked elastomers not only provides insights into strategies for elastomer functionalization but also provides new ideas for material design and inspires a variety of new applications.

Cellular Membrane-Engineered Nanovesicles as a Three-Stage Booster to Target the Lesion Core

The lesion core is the area with the most serious injury and vigorous repair. Existing nanocarriers are difficult to break through the targeted delivery to the lesion core for precise treatment in the intracellular and extracellular microenvironment. Herein, a cellular membrane-engineered nanovesicle (CMEV) with a hierarchical structure is constructed using the double emulsion-extrusion method by integrating a neutrophil membrane, functional antibody, and gelled drug-loaded core as a three-stage booster to target the lesion core and deliver catestatin (CST), a small therapeutic peptide, for ischemic cardiomyopathy therapy. By coating the neutrophil membrane outside the shell, CMEV is endowed with the function of neutrophil-like migration to achieve the first stage of tissue targeting. Based on the specific anchoring to injured myocardium, a myosin light chain 3 (MLC3) antibody is embedded to fulfill the second stage of CMEV accumulation in the lesion core. The gelled core containing CST-sodium alginate (NaAlg) with a pH-responsive shell is prepared by ionic cross-linking to accomplish the third stage of precise CST administration. Triggered by the microenvironment, NaAlg electrostatically adheres to the lesion core for sustained release, enhancing the efficacy of CST in improving cardiomyocyte apoptosis, excessive fibrosis, macrophage polarization, and angiogenesis. Thus, the "three-stage booster" nanovesicle significantly ameliorates cardiac function and adverse remodeling to treat ischemic cardiomyopathy.

Chronological adhesive cardiac patch for synchronous mechanophysiological monitoring and electrocoupling therapy

With advances in tissue engineering and bioelectronics, flexible electronic hydrogels that allow conformal tissue integration, online precision diagnosis, and simultaneous tissue regeneration are expected to be the next-generation platform for the treatment of myocardial infarction. Here, we report a functionalized polyaniline-based chronological adhesive hydrogel patch (CAHP) that achieves spatiotemporally selective and conformal embedded integration with a moist and dynamic epicardium surface. Significantly, CAHP has high adhesion toughness, rapid self-healing ability, and enhanced electrochemical performance, facilitating sensitive sensing of cardiac mechanophysiology-mediated microdeformations and simultaneous improvement of myocardial fibrosis-induced electrophysiology. As a result, the flexible CAHP platform monitors diastolic-systolic amplitude and rhythm in the infarcted myocardium online while effectively inhibiting ventricular remodeling, promoting vascular regeneration, and improving electrophysiological function through electrocoupling therapy. Therefore, this diagnostic and therapeutic integration provides a promising monitorable treatment protocol for cardiac disease.

Highly resilient and fatigue-resistant poly(4-methyl-ε-caprolactone) porous scaffold fabricated via thiol-yne photo-crosslinking/salt-templating for soft tissue regeneration

Elastomeric scaffolds, individually customized to mimic the structural and mechanical properties of natural tissues have been used for tissue regeneration. In this regard, polyester elastic scaffolds with tunable mechanical properties and exceptional biological properties have been reported to provide mechanical support and structural integrity for tissue repair. Herein, poly(4-methyl-ε-caprolactone) (PMCL) was first double-terminated by alkynylation (PMCL-DY) as a liquid precursor at room temperature. Subsequently, three-dimensional porous scaffolds with custom shapes were fabricated from PMCL-DY via thiol-yne photocrosslinking using a practical salt template method. By manipulating the M_n of the precursor, the modulus of compression of the scaffold was easily adjusted. As evidenced by the complete recovery from 90% compression, the rapid recovery rate of >500 mm min^-1, the extremely low energy loss coefficient of <0.1, and the superior fatigue resistance, the PMCL20-DY porous scaffold was confirmed to harbor excellent elastic properties. In addition, the high resilience of the scaffold was confirmed to endow it with a minimally invasive application potential. In vitro testing revealed that the 3D porous scaffold was biocompatible with rat bone marrow stromal cells (BMSCs), inducing BMSCs to differentiate into chondrogenic cells. In addition, the elastic porous scaffold demonstrated good regenerative efficiency in a 12-week rabbit cartilage defect model. Thus, the novel polyester scaffold with adaptable mechanical properties may have extensive applications in soft tissue regeneration.

3D Printed Chondrogenic Functionalized PGS Bioactive Scaffold for Cartilage Regeneration

Tissue engineering is emerging as a promising approach for cartilage regeneration and repair. Endowing scaffolds with cartilaginous bioactivity to obtain bionic microenvironment and regulating the matching of scaffold degradation and regeneration play a crucial role in cartilage regeneration. Poly(glycerol sebacate) (PGS) is a representative thermosetting bioelastomer known for its elasticity, biodegradability, and biocompatibility and is widely used in tissue engineering. However, the modification and drug loading of the PGS scaffold is still a key challenge due to its high temperature curing conditions and limited reactive groups, which seriously hinders its further functional application. Here, a simple versatile new strategy of super swelling-absorption and cross-linked networks locking is presented to successfully create the 3D printed PGS-CS/Gel scaffold for the first time based on FDA-approved PGS, gelatin (Gel) and chondroitin sulfate (CS). The PGS-CS/Gel scaffold exhibits the desirable synergistic properties of well-organized hierarchical structures, excellent elasticity, improved hydrophilicity, and cartilaginous bioactivity, which can promote the adhesion, proliferation, and migration of chondrocytes. Importantly, the rate of cartilage regeneration can be well-matched with degradation of PGS-CS/Gel scaffold, and achieve uniform and mature cartilage tissue without scaffold residual. The bioactive scaffold can successfully repair cartilage in a rabbit trochlear groove defect model indicating a promising prospect of clinical transformation.

Recent Advances of Using Exosomes as Diagnostic Markers and Targeting Carriers for Cardiovascular Disease

Cardiovascular diseases (CVDs) are the leading cause of human death worldwide. Exosomes act as endogenous biological vectors; they possess advantages of low immunogenicity and low safety risks, also providing tissue selectivity, including the inherent targeting the to heart. Therefore, exosomes not only have been applied as biomarkers for diagnosis and therapeutic outcome confirmation but also showed potential as drug carriers for cardiovascular targeting delivery. This review aims to summarize the progress and challenges of exosomes as novel biomarkers, especially many novel exosomal noncoding RNAs (ncRNAs), and also provides an overview of the improved targeting functions of exosomes by unique engineered approaches, the latest developed administration methods, and the therapeutic effects of exosomes used as the biocarriers of medications for cardiovascular disease treatment. Also, the possible therapeutic mechanisms and the potentials for transferring exosomes to the clinic for CVD treatment are discussed. The advances, in vivo and in vitro applications, modifications, mechanisms, and challenges summarized in this review will provide a general understanding of this promising strategy for CVD treatment.

Gelatin-modified 3D printed PGS elastic hierarchical porous scaffold for cartilage regeneration

Regenerative cartilage replacements are increasingly required in clinical settings for various defect repairs, including bronchial cartilage deficiency, articular cartilage injury, and microtia reconstruction. Poly (glycerol sebacate) (PGS) is a widely used bioelastomer that has been developed for various regenerative medicine applications because of its excellent elasticity, biodegradability, and biocompatibility. However, because of inadequate active groups, strong hydrophobicity, and limited ink extrusion accuracy, 3D printed PGS scaffolds may cause insufficient bioactivity, inefficient cell inoculation, and inconsistent cellular composition, which seriously hinders its further cartilage regenerative application. Here, we combined 3D printed PGS frameworks with an encapsulated gelatin hydrogel to fabricate a PGS@Gel composite scaffold. PGS@Gel scaffolds have a controllable porous microstructure, with suitable pore sizes and enhanced hydrophilia, which could significantly promote the cells' penetration and adhesion for efficient chondrocyte inoculation. Furthermore, the outstanding elasticity and fatigue durability of the PGS framework enabled the regenerated cartilage built by the PGS@Gel scaffolds to resist the dynamic in vivo environment and maintain its original morphology. Importantly, PGS@Gel scaffolds increased the rate of cartilage regeneration concurrent with scaffold degradation. The scaffold was gradually degraded and integrated to form uniform, dense, and mature regenerated cartilage tissue with little scaffold residue.

Injectable polyaniline nanorods/alginate hydrogel with AAV9-mediated VEGF overexpression for myocardial infarction treatment

Intramyocardial injection of hydrogels possesses great potential in the minimally invasive treatment of myocardial infarction (MI), but the current injectable hydrogels lack conductivity, long-term angiogenesis inductive ability, and reactive oxygen species (ROS)-scavenging ability, which are essential for myocardium repair. In this study, lignosulfonate-doped polyaniline (PANI/LS) nanorods and adeno-associated virus encoding vascular endothelial growth factor (AAV9-VEGF) are incorporated in the calcium-crosslinked alginate hydrogel to develop an injectable conductive hydrogel with excellent antioxidative and angiogenic ability (Alg-P-AAV hydrogel). Due to the special nanorod morphology, a conductive network is constructed in the hydrogel with the conductivity matching the native myocardium for excitation conduction. The PANI/LS nanorod network may also have large specific surfaces and effectively scavenges ROS to protect cardiomyocytes from oxidative stress damage. AAV9-VEGF transfects the surrounding cardiomyocytes for continuously expressing VEGF, which significantly promotes the proliferation, migration and tube formation of endothelial cells. After injecting the Alg-P-AAV hydrogel around the MI area in rats, the generation of gap junctions and angiogenesis are greatly improved with reduced infarct area and recovered cardiac function. The remarkable therapeutic effect indicates the promising potential of this multi-functional hydrogel for MI treatment.

A Matrix-Metalloproteinase-Responsive Hydrogel System for Modulating the Immune Microenvironment in Myocardial Infarction

Injectable hydrogels carrying therapeutic factors to modulate the infarct immune microenvironment show great potential in the treatment of myocardial infarction (MI). However, conventional injectable hydrogels release therapeutic factors in an uncontrolled manner, which leads to poor treatment efficacy and acute side effects on normal tissues. In this work, a matrix metalloproteinase (MMP)2/9-responsive hydrogel system (MPGC4) is developed, considering the characteristics of the post-MI microenvironment. MPGC4 consists of tetra-poly(ethylene glycol) (PEG) hydrogels and a composite gene nanocarrier (CTL4) that is composed of carbon dots (CDots) coupled with interleukin-4 plasmid DNA via electrostatic interactions. MPGC4 can be automatically triggered to release CTL4 on demand after MI to regulate the infarct immune microenvironment. In addition, due to the photoluminescence properties of CDots, a large amount of viscoelastic MPGC4 is found to be retained in situ after injection into the infarct region without leakage. The in vitro results demonstrate that CTL4 promotes proinflammatory M1 macrophage polarization to the anti-inflammatory M2 subtype and contributes to cardiomyocyte survival through macrophage transition. In a rat model of MI, MPGC4 clears MMPs and precisely targets CTL4 to the infarcted region. In particular, MPGC4 improves cardiac function by modulating macrophage transition to reduce early inflammatory responses and proangiogenic activity.

Preliminary Application Research of 3D Bioprinting in Craniofacial Reconstruction

INTRODUCTION

In recent years, 3-dimensional (3D) printing has been widely used in regenerative medicine research and other fields because of its ability to customize macroscopic morphology and precisely control microstructure. Polymer scaffolds are 1 of the commonly used 3D bioprinting materials for defect repair and have recently been a research focus. Our article explored the bone-formation accelerating effect of 3D-printed porous scaffold Poly(glycerol sebacate) [PGS] in the critical bone defect of an enhancing rabbit mandibular model. Also, we overview and summarize the classification of 3D bioprinting materials and prospects for their various application scenarios in craniofacial reconstruction surgery.

MATERIALS AND METHODS

A PGS elastomer scaffold was prepared by polymerizing equimolar amounts of sebacic acid and glycerol using a biological 3D printer. Six male New Zealand white rabbits were prepared (3 for the control group and 3 for the PGS group), each weighing 3 kg. Osteotomy was performed at the anterior edge of the ascending ramus of the mandible with a bone saw to open the 8 mm defect. Defects of the control group were empty, and defects of the PGS group were put into 8 mm-wide PGS elastomer scaffolds. The rabbits were euthanized 6 weeks after the operation, and the postoperative mandibles were collected. Information (presence or absence of pus from infection, nonunion, degree of macroscopic bone healing) was recorded, and the skeletal tissue was fixed in a paraformaldehyde solution.

RESULTS

The mandible on the enhanced side was significantly longer than that on the opposite side, and the contralateral incisor was hyperplasia. The mandibles of rabbits in each group healed well, and there was no obvious local infection and purulence. The gross specimen appearance showed that both ends of the defect were connected. When comparing the reconstructed mandibles of the two groups, it is apparent that the width and thickness of the new bone in the PGS group were significantly better than that in the control group.

CONCLUSIONS

This article verifies the effect of 3D polypore PGS scaffolds in animal craniomaxillofacial bone defects and introduces various application scenarios of 3D printing materials in craniomaxillofacial reconstruction surgery. There are quite good application prospects for 3D bioprinting in animal experiments and even clinical treatment of craniofacial defects.

Engineering a conduction-consistent cardiac patch with rGO/PLCL electrospun nanofibrous membranes and human iPSC-derived cardiomyocytes

The healthy human heart has special directional arrangement of cardiomyocytes and a unique electrical conduction system, which is critical for the maintenance of effective contractions. The precise arrangement of cardiomyocytes (CMs) along with conduction consistency between CMs is essential for enhancing the physiological accuracy of in vitro cardiac model systems. Here, we prepared aligned electrospun rGO/PLCL membranes using electrospinning technology to mimic the natural heart structure. The physical, chemical and biocompatible properties of the membranes were rigorously tested. We next assembled human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) on electrospun rGO/PLCL membranes in order to construct a myocardial muscle patch. The conduction consistency of cardiomyocytes on the patches were carefully recorded. We found that cells cultivated on the electrospun rGO/PLCL fibers presented with an ordered and arranged structure, excellent mechanical properties, oxidation resistance and effective guidance. The addition of rGO was found to be beneficial for the maturation and synchronous electrical conductivity of hiPSC-CMs within the cardiac patch. This study verified the possibility of using conduction-consistent cardiac patches to enhance drug screening and disease modeling applications. Implementation of such a system could one day lead to in vivo cardiac repair applications.

The Role of Hydrogel in Cardiac Repair and Regeneration for Myocardial Infarction: Recent Advances and Future Perspectives

A myocardial infarction (MI) is the leading cause of morbidity and mortality, seriously threatens human health, and becomes a major health burden of our society. It is urgent to pursue effective therapeutic strategies for the regeneration and restore myocardial function after MI. This review discusses the role of hydrogel in cardiac repair and regeneration for MI. Hydrogel-based cardiac patches and injectable hydrogels are the most commonly used applications in cardiac regeneration medicine. With injectable hydrogels, bioactive compounds and cells can be delivered in situ, promoting in situ repair and regeneration, while hydrogel-based cardiac patches reduce myocardial wall stress, which passively inhibits ventricular expansion. Hydrogel-based cardiac patches work as mechanically supportive biomaterials. In cardiac regeneration medicine, clinical trials and commercial products are limited. Biomaterials, biochemistry, and biological actives, such as intelligent hydrogels and hydrogel-based exosome patches, which may serve as an effective treatment for MI in the future, are still under development. Further investigation of clinical feasibility is warranted. We can anticipate hydrogels having immense translational potential for cardiac regeneration in the near future.

Advances in 4D printing: from stimulation to simulation

The advancement of four-dimensional (4D) printing has been fueled by the rise in demand for additive manufacturing and the expansion in shape-memory materials. The printing of smart substances that respond to external stimuli is known as 4D printing. 4D printing allows highly controlled shapes to simulate the physiological milieu by adding time dimensions. The 4D printing is suitable with current progress in smart compounds, printers, and its mechanism of action. The 4D printing paradigm, a revolutionary enhancement of 3D printing, was anticipated by various engineering disciplines. Tissue engineering, medicinal, consumer items, aerospace, and organ engineering use 4D printing technology. The current review mainly focuses on the basics of 4D printing and the methods used therein. It also discusses the time-dependent behavior of stimulus-sensitive compounds, which are widely used in 4D printing. In addition, this review highlights material aspects, specifically related to shape-memory polymers, stimuli-responsive materials (classified as physical, chemical, and biological), and modified materials, the backbone of 4D printing technology. Finally, potential applications of 4D printing in the biomedical sector are also discussed with challenges and future perspectives.

Biomaterials-Based Cell Therapy for Myocardial Tissue Regeneration

Cardiovascular diseases (CVDs) have been the leading cause of death worldwide during the past several decades. Cell loss is the main problem that results in cardiac dysfunction and further mortality. Cell therapy aiming to replenish the lost cells is proposed to treat CVDs especially ischemic heart diseases which lead to a big portion of cell loss. Due to the direct injection's low cell retention and survival ratio, cell therapy using biomaterials as cell carriers has attracted more and more attention because of their promotion of cell delivery and maintenance at the aiming sites. In this review, the three main factors involved in cell therapy for myocardial tissue regeneration: cell sources (somatic cells, stem cells, and engineered cells), chemical components of cell carriers (natural materials, synthetic materials, and electroactive materials), and categories of cell delivery materials (patches, microspheres, injectable hydrogels, nanofiber and microneedles, etc.) are systematically summarized. An introduction of the methods including magnetic resonance/radionuclide/photoacoustic and fluorescence imaging for tracking the behavior of transplanted cells in vivo is also included. Current challenges of biomaterials-based cell therapy and their future directions are provided to give both beginners and professionals a clear view of the development and future trends in this area.

Elastomeric, bioadhesive and pH-responsive amphiphilic copolymers based on direct crosslinking of poly(glycerol sebacate)-co-polyethylene glycol

Poly(glycerol sebacate) (PGS), a synthetic biorubber, is characterised by its biocompatibility, high elasticity and tunable mechanical properties; however, its inherent hydrophobicity and insolubility in water make it unsuitable for use in advanced biomaterials like hydrogels fabrication. Here, we developed new hydrophilic PGS-based copolymers that enable hydrogel formation through use of two different types of polyethylene glycol (PEG), polyethylene glycol (PEG2) or glycerol ethoxylate (PEG3), combined at different ratios. A two-step polycondensation reaction was used to produce poly(glycerol sebacate)-co-polyethylene glycol (PGS-co-PEG) copolymers that were then crosslinked thermally without the use of initiators or crosslinkers, resulting in PGS-co-PEG2 and PGS-co-PEG3 amphiphilic polymers. It has been illustrated that the properties of PGS-co-PEG copolymers can be controlled by altering the type and amount of PEG. PGS-co-PEG copolymers containing PEG ≥ 40% showed high swelling, flexibility, stretching, bioadhesion and biocompatibility, and good enzymatic degradation and mechanical properties. Also, the addition of PEG created hydrogels that demonstrated pH-responsive behaviours, which can be used for bioapplications requiring responding to physicochemical dynamics. Interestingly, PGS-co-40PEG2 and PGS-co-60PEG3 had the highest shear strengths, 340.4 ± 49.7 kPa and 336.0 ± 35.1 kPa, and these are within the range of commercially available sealants or bioglues. Due to the versatile multifunctionalities of these new copolymer hydrogels, they can have great potential in soft tissue engineering and biomedicine.

Elastic and Conductive Melanin/Poly(Vinyl Alcohol) Composite Hydrogel for Enhancing Repair Effect on Myocardial Infarction

Heart failure caused by acute myocardial infarction (MI) still remains the main cause of death worldwide. Development of conductive hydrogels provided a promising approach for the treatment of myocardial infarction. However, the therapeutic potential of these hydrogels is still limited by material toxicity or low conductivity. The latter directly affects the coupling and the propagation of electrical signals between cells. Here, a functional conductive hydrogel by combining hydrophilic and biocompatible poly(vinyl alcohol) (PVA) with conductive melanin nanoparticles under physical crosslinking conditions is prepared. The composite hydrogels prepared by a facile fabrication process of five freeze/thaw cycles possessed satisfying mechanical properties and conductivity close to those of the natural heart. The physical properties and biocompatibility are evaluated in vitro experiments, showing that the introduction of melanin particles successfully improved the elasticity, conductivity, and cell adhesion of PVA hydrogel. In vivo, the composite hydrogels can enhance the cardiac repair effect by reducing MI area, slowing down ventricular wall thinning, and promoting the vascularization of infarct area in MI rat model. It is believed that the melanin/PVA composite hydrogel may be a suitable candidate material for MI repair.

Development of Innovative Biomaterials and Devices for the Treatment of Cardiovascular Diseases

Cardiovascular diseases have become the leading cause of death worldwide. The increasing burden of cardiovascular diseases has become a major public health problem and how to carry out efficient and reliable treatment of cardiovascular diseases has become an urgent global problem to be solved. Recently, implantable biomaterials and devices, especially minimally invasive interventional ones, such as vascular stents, artificial heart valves, bioprosthetic cardiac occluders, artificial graft cardiac patches, atrial shunts, and injectable hydrogels against heart failure, have become the most effective means in the treatment of cardiovascular diseases. Herein, an overview of the challenges and research frontier of innovative biomaterials and devices for the treatment of cardiovascular diseases is provided, and their future development directions are discussed.

An Intrapericardial Injectable Hydrogel Patch for Mechanical-Electrical Coupling with Infarcted Myocardium

Although hydrogel-based patches have shown promising therapeutic efficacy in myocardial infarction (MI), synergistic mechanical, electrical, and biological cues are required to restore cardiac electrical conduction and diastolic-systolic function. Here, an injectable mechanical-electrical coupling hydrogel patch (MEHP) is developed via dynamic covalent/noncovalent cross-linking, appropriate for cell encapsulation and minimally invasive implantation into the pericardial cavity. Pericardial fixation and hydrogel self-adhesiveness properties enable the MEHP to highly compliant interfacial coupling with cyclically deformed myocardium. The self-adaptive MEHP inhibits ventricular dilation while assisting cardiac pulsatile function. The MEHP with the electrical conductivity and sensitivity to match myocardial tissue improves electrical connectivity between healthy and infarcted areas and increases electrical conduction velocity and synchronization. Overall, the MEHP combined with cell therapy effectively prevents ventricular fibrosis and remodeling, promotes neovascularization, and restores electrical propagation and synchronized pulsation, facilitating the clinical translation of cardiac tissue engineering.

Detachable Microneedle Patches Deliver Mesenchymal Stromal Cell Factor-Loaded Nanoparticles for Cardiac Repair

Intramyocardial injection is a direct and efficient approach to deliver therapeutics to the heart. However, the injected volume must be very limited, and there is injury to the injection site and leakage issues during heart beating. Herein, we developed a detachable therapeutic microneedle (MN) patch, which is comprised of mesenchymal stromal cell-secreted factors (MSCF)-loaded poly(lactic-co-glycolic acid) nanoparticles (NP) in MN tips made of elastin-like polypeptide gel, with a resolvable non-cross-linked hyaluronic acid (HA) gel as the MN base. The tips can be firmly inserted into the infarcted myocardium after base removal, and no suture is needed. In isolated neonatal rat cardiac cells, we found that the cellular uptake of MSCF-NP in the cardiomyocytes was higher than in cardiac fibroblasts. MSCF-NP promoted the proliferation of injured cardiomyocytes. In a rat model of myocardial infarction, MN-MSCF-NP treatment reduced cardiomyocyte apoptosis, restored myocardium volume, and reduced fibrosis during the cardiac remodeling process. Our work demonstrated the therapeutic potential of MN to deliver MSCF directly into the myocardium and provides a promising treatment approach for cardiac diseases.

Extracellular matrix derived from Wharton's Jelly-derived mesenchymal stem cells promotes angiogenesis via integrin αVβ3/c-Myc/P300/VEGF

BACKGROUND

Angiogenesis is required in many physiological conditions, including bone regeneration, wound healing, and tissue regeneration. Mesenchymal stem cells-derived extracellular matrix (MSCs-ECM) could guide intricate cellular and tissue processes such as homeostasis, healing and regeneration.

METHODS

The purpose of this study is to explore the effect and mechanism of ECM derived from decellularized Wharton's Jelly-derived mesenchymal stem cells (WJ-MSCs) on endothelial cell viability and angiogenesis. The human umbilical vein endothelial cells (HUVECs) were pretreated with WJ-MSCs ECM for 2d/7d/14d, respectively. After pretreatment, the angiogenesis ability of HUVECs was detected.

RESULTS

In this study, we found for the first time that WJ-MSCs ECM could improve the angiogenesis ability of HUVECs with a time-dependent manner in vitro. Mechanically, WJ-MSCs ECM activated the focal adhesion kinase (FAK)/P38 signaling pathway via integrin αVβ3, which further promoted the expression of the cellular (c)-Myc. Further, c-Myc increased histone acetylation levels of the vascular endothelial growth factor (VEGF) promoter by recruiting P300, which ultimately promoting VEGF expression.

CONCLUSIONS

ECM derived from Wharton's Jelly-derived mesenchymal stem cells promotes angiogenesis via integrin αVβ3/c-Myc/P300/VEGF. This study is expected to provide a new approach to promote angiogenesis in bone and tissue regeneration.

Myocardial infarct border demarcation by dual-wavelength photoacoustic spectral analysis

Myocardial infarction (MI) is a major cause of morbidity and mortality worldwide. Modern therapeutic strategies targeting the infarct border area have been shown to benefit overall cardiac function after MI. However, there is no non-invasive diagnostic technique to precisely demarcate the MI boundary till to now. In this study, the feasibility of demarcating the MI border using dual-wavelength photoacoustic spectral analysis (DWPASA) was investigated. To quantify specific molecular characteristics before and after MI, "the ratio of the areas of the power spectral densities (R _APSD)" was computed from the DWPASA results. Compared to the normal tissue, MI tissue was shown to contain more collagen, resulting in higher R _APSD values (p < 0.001). Cross-sectional MI lengths and the MI area border demarcated in two dimensions by DWPASA were in substantial agreement with Masson staining (ICC = 0.76, p < 0.001, IoU = 0.72). R _APSD has been proved that can be used as an indicator of disease evolution to distinguish normal and pathological tissues. These findings indicate that the DWPASA method may offer a new diagnostic solution for determining MI borders.

Three-dimensional-printed polycaprolactone scaffolds with interconnected hollow-pipe structures for enhanced bone regeneration

Three-dimensional (3D)-printed scaffolds are widely used in tissue engineering to help regenerate critical-sized bone defects. However, conventional scaffolds possess relatively simple porous structures that limit the delivery of oxygen and nutrients to cells, leading to insufficient bone regeneration. Accordingly, in the present study, perfusable and permeable polycaprolactone scaffolds with highly interconnected hollow-pipe structures that mimic natural micro-vascular networks are prepared by an indirect one-pot 3D-printing method. In vitro experiments demonstrate that hollow-pipe-structured (HPS) scaffolds promote cell attachment, proliferation, osteogenesis and angiogenesis compared to the normal non-hollow-pipe-structured scaffolds. Furthermore, in vivo studies reveal that HPS scaffolds enhance bone regeneration and vascularization in rabbit bone defects, as observed at 8 and 12 weeks, respectively. Thus, the fabricated HPS scaffolds are promising candidates for the repair of critical-sized bone defects.

Biomaterials to enhance stem cell transplantation

The successful transplantation of stem cells has the potential to transform regenerative medicine approaches and open promising avenues to repair, replace, and regenerate diseased, damaged, or aged tissues. However, pre-/post-transplantation issues of poor cell survival, retention, cell fate regulation, and insufficient integration with host tissues constitute significant challenges. The success of stem cell transplantation depends upon the coordinated sequence of stem cell renewal, specific lineage differentiation, assembly, and maintenance of long-term function. Advances in biomaterials can improve pre-/post-transplantation outcomes by integrating biophysiochemical cues and emulating tissue microenvironments. This review highlights leading biomaterials-based approaches for enhancing stem cell transplantation.

V1-Cal hydrogelation enhances its effects on ventricular remodeling reduction and cardiac function improvement post myocardial infarction

Myocardial infarction (MI) is a major cause of disability and mortality worldwide. A cell permeable peptide V1-Cal has shown remarkable therapeutic effects on ML However, using V1-Cal to improve long-term cardiac function after MI is presently limited by its short half-life. Herein, we co-assembled V1-Cal with a well-known hydrogelator Nap-Phe-Phe-Tyr (NapFFY) to obtain a new supramolecular hydrogel V1-Cal/NapFFY. We found that the hydrogel could significantly enhance the therapeutic effects of V1-Cal on ventricular remodeling reduction and cardiac function improvement in a myocardial infarction rat model. In vitro experiments indicated that co-assembly of V1-Cal with NapFFY significantly increased mechanic strength of the hydrogel, enabling a sustained release of V1-Cal for more than two weeks. In vivo experiments supported that sustained release of V1-Cal from V1-Cal/NapFFY hydrogel could effectively decrease the expression and activation of TRPV1, reduce apoptosis and the release of inflammatory factors in a MI rat model. In particular, V1-Cal/NapFFY hydrogel significantly decreased infarct size and fibrosis, while improved cardiac function 28 days post MI. We anticipate that V1-Cal/NapFFY hydrogel could be used clinically to treat MI in the near future.

Taking It Personally: 3D Bioprinting a Patient-Specific Cardiac Patch for the Treatment of Heart Failure

Despite a massive global preventative effort, heart failure remains the major cause of death globally. The number of patients requiring a heart transplant, the eventual last treatment option, far outnumbers the available donor hearts, leaving many to deteriorate or die on the transplant waiting list. Treating heart failure by transplanting a 3D bioprinted patient-specific cardiac patch to the infarcted region on the myocardium has been investigated as a potential future treatment. To date, several studies have created cardiac patches using 3D bioprinting; however, testing the concept is still at a pre-clinical stage. A handful of clinical studies have been conducted. However, moving from animal studies to human trials will require an increase in research in this area. This review covers key elements to the design of a patient-specific cardiac patch, divided into general areas of biological design and 3D modelling. It will make recommendations on incorporating anatomical considerations and high-definition motion data into the process of 3D-bioprinting a patient-specific cardiac patch.

Engineered Customizable Microvessels for Progressive Vascularization in Large Regenerative Implants

Inspired by the rapid angiogenesis of natural microvessels in vivo, engineered customizable microvessels (ECMVs) are developed which can naturally angiogenic sprout and induce vascular network formation via combing a celluar coaxial microfluidic extrusion technique with microsurgery post-process. ECMVs can be used for customization of primarily pre-vascularized soft tissue regenerative implants with personalized shape and vascular density with the aid of sacrificial printing technology. After collaborating with surrounding cells, ECMVs angiogenic sprouted and formed daughter vascular networks. Through techniques such as injection and suturing, ECMVs can also be introduced into large bone repair implants for pre-vascularization and osteogenesis promotion. Furthermore, the microvessel networks with personalized shapes are customized by connecting the coaxial microfluidic system to a 3D printer. It is further demonstrated that the vascularization promotion and anastomose with host vessels of the ECMVs in vivo. Thus, ECMVs provide a simple engineering strategy for rapid vascularization of clinically large regenerative soft/hard tissue implants.

Microneedle-mediated therapy for cardiovascular diseases

Cardiovascular diseases remain a leading cause of global disease burden. To date, the limited drug delivery efficacy confines the therapeutic effect in most conventional approaches, such as intramyocardial injections and vascular devices, due to short-term drug release and low retention within the disease sites. As a typical transdermal medical device with a minimally invasive manner and controlled/sustained drug release pattern, microneedles have gained momentum in the field of cardiovascular therapy, from which several cardiovascular diseases have been benefited to the ultimate therapeutic effects. In this concise review, strategies based on the microneedles for the treatments of cardiovascular diseases are introduced, mainly focus on hypertension, atherosclerosis, thrombus, and myocardial diseases. The limitations at the present stage and perspectives of the next-generation microneedles for cardiovascular therapy are also discussed.

Poly(glycerol sebacate)-co-poly(ethylene glycol)/Gelatin Hybrid Hydrogels as Biocompatible Biomaterials for Cell Proliferation and Spreading

Synthetic polymers have been widely employed to prepare hydrogels for biomedical applications, such as cell culture, drug delivery, and tissue engineering. However, the activity of cells cultured in the synthetic polymer-based hydrogels faces the challenges of limited cell proliferation and spreading compared to cells cultured in natural polymer-based hydrogels. To address this concern, a hybrid hydrogel strategy is demonstrated by incorporating thiolated gelatin (GS) into the norbornene-functionalized poly (glycerol sebacate)-co-polyethylene glycol (Nor_PGS-co-PEG, NPP) network to prepare highly biocompatible NPP/GS_UV hydrogels after the thiol-ene photo-crosslinking reaction. The GS introduces several desirable features (i.e., enhanced water content, enlarged pore size, increased mechanical property, and more cell adhesion sites) to the NPP/GS_UV hydrogels, facilitating the cell proliferation and spreading inside the network. Thus, the highly biocompatible NPP/GS_UV hydrogels are promising materials for cell encapsulation and tissue engineering applications. Taken together, the hybrid hydrogel strategy is demonstrated as a powerful approach to fabricate hydrogels with a highly friendly environment for cell culture, expanding the biomedical applications of hydrogels.

Encapsulation of lyophilized platelet-rich fibrin in alginate-hyaluronic acid hydrogel as a novel vascularized substitution for myocardial infarction

Cardiovascular diseases such as myocardial infarction (MI) are among the major causes of death worldwide. Although intramyocardial injection of hydrogels can effectively enhance the ventricular wall, this approach is limited because of its restriction to the poor vascularization in the infarcted myocardium. Here, we reported a new type of hydrogel composed of alginate (ALG) and hyaluronic acid (HA) with lyophilized platelet-rich fibrin (Ly-PRF) for releasing abundant growth factors to realize their respective functions. The results of in vitro studies demonstrated favorable mechanical property and release ability of ALG-HA with Ly-PRF. When injected into the infarcted myocardium, this composite hydrogel preserved heart function and the Ly-PRF within the hydrogel promoted angiogenesis and increased vascular density in both infarcted and border zone, which rescued the ischemic myocardium. These beneficial effects were also accompanied by macrophage polarization and regulation of myocardial fibrosis. Moreover, the autologous origin of Ly-PRF with ALG-HA hydrogel offers myriad advantages including safety profile, easiness to obtain and cost-effectiveness. Overall, this study demonstrated the versatile therapeutic effects of a novel composite hydrogel ALG-HA with Ly-PRF, which optimizes a promising vascularized substitution strategy for improving cardiac function after MI.

Matrix stiffness modulates tip cell formation through the p-PXN-Rac1-YAP signaling axis

Endothelial tip cell outgrowth of blood-vessel sprouts marks the initiation of angiogenesis which is critical in physiological and pathophysiological procedures. However, how mechanical characteristics of extracellular matrix (ECM) modulates tip cell formation has been largely neglected. In this study, we found enhanced CD31 expression in the stiffening outer layer of hepatocellular carcinoma than in surrounding soft tissues. Stiffened matrix promoted sprouting from endothelial cell (EC) spheroids and upregulated expressions of tip cell-enriched genes in vitro. Moreover, tip cells showed increased cellular stiffness, more actin cytoskeleton organization and enhanced YAP nuclear transfer than stalk and phalanx ECs. We further uncovered that substrate stiffness regulates FAK and Paxillin phosphorylation in focal adhesion of ECs promoting Rac1 transition from inactive to active state. YAP is subsequently activated and translocated into nucleus, leading to increased tip cell specification. p-Paxillin can also loosen the intercellular connection which also facilitates tip cell specification. Collectively our present study shows that matrix stiffness modulates tip cell formation through p-PXN-Rac1-YAP signaling axis, shedding light on the role of mechanotransduction in tip cell formation. This is of special significance in biomaterial design and treatment of some pathological situations.

•

Mechanotransduction is implicated in angiogenesis and tip cell formation.

•

Tip cells showed different mechanical properties from stalk and phalanx ECs.

•

Paxillin, Rac1 and YAP might be novel treatment targets for some diseases.

•

Material stiffness affects tip cell specification.

3D bioprinting in cardiac tissue engineering

Heart disease is the main cause of death worldwide. Because death of the myocardium is irreversible, it remains a significant clinical challenge to rescue myocardial deficiency. Cardiac tissue engineering (CTE) is a promising strategy for repairing heart defects and offers platforms for studying cardiac tissue. Numerous achievements have been made in CTE in the past decades based on various advanced engineering approaches. 3D bioprinting has attracted much attention due to its ability to integrate multiple cells within printed scaffolds with complex 3D structures, and many advancements in bioprinted CTE have been reported recently. Herein, we review the recent progress in 3D bioprinting for CTE. After a brief overview of CTE with conventional methods, the current 3D printing strategies are discussed. Bioink formulations based on various biomaterials are introduced, and strategies utilizing composite bioinks are further discussed. Moreover, several applications including heart patches, tissue-engineered cardiac muscle, and other bionic structures created via 3D bioprinting are summarized. Finally, we discuss several crucial challenges and present our perspective on 3D bioprinting techniques in the field of CTE.

A Review: Optimization for Poly(glycerol sebacate) and Fabrication Techniques for Its Centered Scaffolds

Poly(glycerol sebacate) (PGS), an emerging promising thermosetting polymer synthesized from sebacic acid and glycerol, has attracted considerable attention due to its elasticity, biocompatibility, and tunable biodegradation properties. But it also has some drawbacks such as harsh synthesis conditions, rapid degradation rates, and low stiffness. To overcome these challenges and optimize PGS performance, various modification methods and fabrication techniques for PGS-based scaffolds have been developed in recent years. Outlining the current modification approaches of PGS and summarizing the fabrication techniques for PGS-based scaffolds are of great importance to accelerate the development of new materials and enable them to be appropriately used in potential applications. Thus, this review comprehensively overviews PGS derivatives, PGS composites, PGS blends, processing for PGS-based scaffolds, and their related applications. It is envisioned that this review could instruct and inspire the design of the PGS-based materials and facilitate tissue engineering advances into clinical practice.