Temperature imaging using a cationic linear fluorescent polymeric thermometer and fluorescence lifetime imaging microscopy

Temperature-Activated Near-Infrared-II Fluorescence and SERS Dynamic-Reversible Probes for Long-Term Assessment of Osteoarthritis In Vivo

The abnormal fluctuation of temperature in vivo usually reflects the progression of inflammatory diseases. Noninvasive, real-time, and accurate monitoring and imaging of temperature variation in vivo is advantageous for guiding the early diagnosis and treatment of disease, but it remains difficult to achieve. Herein, we developed a temperature-activated near-infrared-II fluorescence (NIR-II FL) and surface-enhanced Raman scattering (SERS) nanoprobe for long-term monitoring of temperature changes in rat arthritis and timely assessment of the status of osteoarthritis. The thermosensitive polymer bearing NIR-II FL dye was grafted onto the surface of nanoporous core-satellite gold nanostructures to form the nanoprobe, wherein the nanoprobe contains NIR-II FL and Raman reference signals that are independent of temperature change. The ratiometric FL1150/FL1550 and S1528/S2226 values of the nanoprobe exhibited a reversible conversion with temperature changes. The nanoprobe accurately distinguishes the temperature variations in the inflamed joint versus the normal joint in vivo by ratiometric FL and SERS imaging, allowing for an accurate diagnosis of inflammation. Meanwhile, it can continuously monitor fluctuations in temperature over an extended period during the onset and treatment of inflammation. The tested temperature change trend could be used as an indicator for early diagnosis of inflammation and real-time evaluation of therapeutic effects.

Mitochondrial Thermogenesis Can Trigger Heat Shock Response in the Nucleus

Mitochondrial thermogenesis is a process in which heat is generated by mitochondrial respiration. In living organisms, the thermogenic mechanisms that maintain body temperature have been studied extensively in fat cells with little knowledge on how mitochondrial heat may act beyond energy expenditure. Here, we highlight that the exothermic oxygen reduction reaction (ΔH f° = -286 kJ/mol) is the main source of the protonophore-induced mitochondrial thermogenesis, and this heat is conducted to other cellular organelles, including the nucleus. As a result, mitochondrial heat that reached the nucleus initiated the classical heat shock response, including the formation of nuclear stress granules and the localization of heat shock factor 1 (HSF1) to chromatin. Consequently, activated HSF1 increases the level of gene expression associated with the response to thermal stress in mammalian cells. Our results illustrate heat generated within the cells as a potential source of mitochondria-nucleus communication and expand our understanding of the biological functions of mitochondria in cell physiology.

Ca2+ Overload Decreased Cellular Viability in Magnetic Hyperthermia without a Macroscopic Temperature Rise

Magnetic hyperthermia is a crucial medical engineering technique for treating diseases, which usually uses alternating magnetic fields (AMF) to interplay with magnetic substances to generate heat. Recently, it has been found that in some cases, there is no detectable temperature increment after applying an AMF, which caused corresponding effects surprisingly. The mechanisms involved in this phenomenon are not yet fully understood. In this study, we aimed to explore the role of Ca2+ overload in the magnetic hyperthermia effect without a perceptible temperature rise. A cellular system expressing the fusion proteins TRPV1 and ferritin was prepared. The application of an AMF (518 kHz, 16 kA/m) could induce the fusion protein to release a large amount of iron ions, which then participates in the production of massive reactive oxygen radicals (ROS). Both ROS and its induced lipid oxidation enticed the opening of ion channels, causing intracellular Ca2+ overload, which further led to decreased cellular viability. Taken together, Ca2+ overload triggered by elevated ROS and the induced oxidation of lipids contributes to the magnetic hyperthermia effect without a perceptible temperature rise. These findings would be beneficial for expanding the application of temperature-free magnetic hyperthermia, such as in cellular and neural regulation, design of new cancer treatment methods.

Response strategies and biological applications of organic fluorescent thermometry: cell- and mitochondrion-level detection

Temperature homeostasis is critical for cells to perform their physiological functions. Among the diverse methods for temperature detection, fluorescent temperature probes stand out as a proven and effective tool, especially for monitoring temperature in cells and suborganelles, with a specific emphasis on mitochondria. The utilization of these probes provides a new opportunity to enhance our understanding of the mechanisms and interconnections underlying various physiological activities related to temperature homeostasis. However, the complexity and variability of cells and suborganelles necessitate fluorescent temperature probes with high resolution and sensitivity. To meet the demanding requirements for intracellular/subcellular temperature detection, several strategies have been developed, offering a range of options to address this challenge. This review examines four fundamental temperature-response strategies employed by small molecule and polymer probes, including intramolecular rotation, polarity sensitivity, Förster resonance energy transfer, and structural changes. The primary emphasis was placed on elucidating molecular design and biological applications specific to each type of probe. Furthermore, this review provides an insightful discussion on factors that may affect fluorescent thermometry, providing valuable perspectives for future development in the field. Finally, the review concludes by presenting cutting-edge response strategies and research insights for mitigating biases in temperature sensing.

Building Fluorescence Lifetime Maps Photon-by-Photon by Leveraging Spatial Correlations

Fluorescence lifetime imaging microscopy (FLIM) has become a standard tool in the quantitative characterization of subcellular environments. However, quantitative FLIM analyses face several challenges. First, spatial correlations between pixels are often ignored as signal from individual pixels is analyzed independently thereby limiting spatial resolution. Second, existing methods deduce photon ratios instead of absolute lifetime maps. Next, the number of fluorophore species contributing to the signal is unknown, while excited state lifetimes with <1 ns difference are difficult to discriminate. Finally, existing analyses require high photon budgets and often cannot rigorously propagate experimental uncertainty into values over lifetime maps and number of species involved. To overcome all of these challenges simultaneously and self-consistently at once, we propose the first doubly nonparametric framework. That is, we learn the number of species (using Beta-Bernoulli process priors) and absolute maps of these fluorophore species (using Gaussian process priors) by leveraging information from pulses not leading to observed photon. We benchmark our framework using a broad range of synthetic and experimental data and demonstrate its robustness across a number of scenarios including cases where we recover lifetime differences between species as small as 0.3 ns with merely 1000 photons.

Luminescent Single-Molecule Magnets as Dual Magneto-Optical Molecular Thermometers

Luminescent thermometry allows the remote detection of the temperature and holds great potential in future technological applications in which conventional systems could not operate. Complementary approaches to measuring the temperature aiming to enhance the thermal sensitivity would however represent a decisive step forward. For the first time, we demonstrate the proof-of-concept that luminescence thermometry could be associated with a complementary temperature readout related to a different property. Namely, we propose to take advantage of the temperature dependence of both magnetic (canonical susceptibility and relaxation time) and luminescence features (emission intensity) found in Single-Molecule Magnets (SMM) to develop original dual magneto-optical molecular thermometers to conciliate high-performance SMM and Boltzmann-type luminescence thermometry. We highlight this integrative approach to concurrent luminescent and magnetic thermometry using an air-stable benchmark SMM [Dy(bbpen)Cl] (H2 bbpen=N,N'-bis(2-hydroxybenzyl)-N,N'-bis(2-methylpyridyl)ethyl-enediamine)) exhibiting Dy3+ luminescence. The synergy between multiparametric magneto-optical readouts and multiple linear regression makes possible a 10-fold improvement in the relative thermal sensitivity of the thermometer over the whole temperature range, compared with the values obtained with the single optical or magnetic devices.

Nanoparticles for Interrogation of Cell Signaling

Cell functions rely on signal transduction-the cascades of molecular interactions and biochemical reactions that relay extracellular signals to the cell interior. Dissecting principles governing the signal transduction process is critical for the fundamental understanding of cell physiology and the development of biomedical interventions. The complexity of cell signaling is, however, beyond what is accessible by conventional biochemistry assays. Thanks to their unique physical and chemical properties, nanoparticles (NPs) have been increasingly used for the quantitative measurement and manipulation of cell signaling. Even though research in this area is still in its infancy, it has the potential to yield new, paradigm-shifting knowledge of cell biology and lead to biomedical innovations. To highlight this importance, we summarize in this review studies that pioneered the development and application of NPs for cell signaling, from quantitative measurements of signaling molecules to spatiotemporal manipulation of cell signal transduction.

Local Temperature Increments and Induced Cell Death in Intracellular Magnetic Hyperthermia

The generation of temperature gradients on nanoparticles heated externally by a magnetic field is crucially important in magnetic hyperthermia therapy. But the intrinsic low heating power of magnetic nanoparticles, at the conditions allowed for human use, is a limitation that restricts the general implementation of the technique. A promising alternative is local intracellular hyperthermia, whereby cell death (by apoptosis, necroptosis, or other mechanisms) is attained by small amounts of heat generated at thermosensitive intracellular sites. However, the few experiments conducted on the temperature determination of magnetic nanoparticles have found temperature increments that are much higher than the theoretical predictions, thus supporting the local hyperthermia hypothesis. Reliable intracellular temperature measurements are needed to get an accurate picture and resolve the discrepancy. In this paper, we report the real-time variation of the local temperature on γ-Fe₂O₃ magnetic nanoheaters using a Sm³⁺/Eu³⁺ ratiometric luminescent thermometer located on its surface during exposure to an external alternating magnetic field. We measure maximum temperature increments of 8 °C on the surface of the nanoheaters without any appreciable temperature increase on the cell membrane. Even with magnetic fields whose frequency and intensity are still well within health safety limits, these local temperature increments are sufficient to produce a small but noticeable cell death, which is enhanced considerably as the magnetic field intensity is increased to the maximum level tolerated for human use, consequently demonstrating the feasibility of local hyperthermia.

Water-Soluble Cationic Eu3+-Metallopolymer with High Quantum Yield and Sensitivity for Intracellular Temperature Sensing

Lanthanide-based (Ln³⁺) luminescent materials are ideal candidates for use in fluorescence intracellular temperature sensing. However, it remains a great challenge to obtain a Ln³⁺-ratiometric fluorescence thermometer with high sensitivity and quantum yield in an aqueous environment. Herein, a cationic Eu³⁺-metallopolymer was synthesized via the coordination of Eu(TTA)₃·2H₂O with an AIE active amphipathic polymer backbone that contains APTMA ((3-acrylamidopropyl) trimethylammonium) and NIPAM (N-isopropylacrylamide) units, which can self-assemble into nanoparticles in water solution with APTMA and NIPAM as the hydrophilic shell. This polymer exhibited highly efficient dual-emissive white-light emission (Φ = 34.3%). Particularly, when the temperature rises, the NIPAM units will transform from hydrophilic to hydrophobic in the spherical core of the nanoparticle, while the VTPE units are moved from inside the nanoparticle to the shell, activating its nonradiative transition channel and thereby decreasing its energy transfer to Eu³⁺ centers, endowing the Eu³⁺-metallopolymer with an extremely high temperature sensing sensitivity within the physiological temperature range. Finally, the real-time monitoring of the intracellular temperature variation is further conducted.

Single-pulse real-time billion-frames-per-second planar imaging of ultrafast nanoparticle-laser dynamics and temperature in flames

Unburnt hydrocarbon flames produce soot, which is the second biggest contributor to global warming and harmful to human health. The state-of-the-art high-speed imaging techniques, developed to study non-repeatable turbulent flames, are limited to million-frames-per-second imaging rates, falling short in capturing the dynamics of critical species. Unfortunately, these techniques do not provide a complete picture of flame-laser interactions, important for understanding soot formation. Furthermore, thermal effects induced by multiple consecutive pulses modify the optical properties of soot nanoparticles, thus making single-pulse imaging essential. Here, we report single-shot laser-sheet compressed ultrafast photography (LS-CUP) for billion-frames-per-second planar imaging of flame-laser dynamics. We observed laser-induced incandescence, elastic light scattering, and fluorescence of soot precursors - polycyclic aromatic hydrocarbons (PAHs) in real-time using a single nanosecond laser pulse. The spatiotemporal maps of the PAHs emission, soot temperature, primary nanoparticle size, soot aggregate size, and the number of monomers, present strong experimental evidence in support of the theory and modeling of soot inception and growth mechanism in flames. LS-CUP represents a generic and indispensable tool that combines a portfolio of ultrafast combustion diagnostic techniques, covering the entire lifecycle of soot nanoparticles, for probing extremely short-lived (picoseconds to nanoseconds) species in the spatiotemporal domain in non-repeatable turbulent environments. Finally, LS-CUP's unparalleled capability of ultrafast wide-field temperature imaging in real-time is envisioned to unravel mysteries in modern physics such as hot plasma, sonoluminescence, and nuclear fusion.

A Guide to Plant Intracellular Temperature Imaging using Fluorescent Thermometers

All aspects of plant physiology are influenced by temperature. Changes in environmental temperature alter the temperatures of plant tissues and cells, which then affect various cellular activities, such as gene expression, protein stability and enzyme activities. In turn, changes in cellular activities, which are associated with either exothermic or endothermic reactions, can change the local temperature in cells and tissues. In the past 10 years, a number of fluorescent probes that detect temperature and enable intracellular temperature imaging have been reported. Intracellular temperature imaging has revealed that there is a temperature difference >1°C inside cells and that the treatment of cells with mitochondrial uncoupler or ionomycin can cause more than a 1°C intracellular temperature increase in mammalian cultured cells. Thermogenesis mechanisms in brown adipocytes have been revealed with the aid of intracellular temperature imaging. While there have been no reports on plant intracellular temperature imaging thus far, intracellular temperature imaging is expected to provide a new way to analyze the mechanisms underlying the various activities of plant cells. In this review, I will first summarize the recent progress in the development of fluorescent thermometers and their biological applications. I will then discuss the selection of fluorescent thermometers and experimental setup for the adaptation of intracellular temperature imaging to plant cells. Finally, possible applications of intracellular temperature imaging to investigate plant cell functions will be discussed.

Measurement of Intracellular Temperature in Brown Adipocytes Using a Cationic Fluorescent Polymeric Thermometer

Brown adipose tissue specializes in expending energy through non-shivering thermogenesis, and many studies have associated its activity with protection and treatment of obesity and metabolic diseases. To reveal the mechanisms involved in heat production, primary cultured brown adipose cells (BACs) have been used because of their ease of genetic engineering and similarity to living tissue. However, thermogenic activity has often been evaluated as an indirect method, such as the measurement of oxygen consumption. Recently, fluorescent nanothermometers for the direct measurement of intracellular temperature have been developed and applied to elucidate the mechanisms of heat production in BACs. In this chapter, we introduce a protocol that uses a cationic fluorescent polymeric thermometer to directly measure the temperature within primary cultured BACs. We anticipate that this protocol will be beneficial in elucidating the mechanism of thermogenesis in BACs.

Full-Color-Tunable Nanohydrogels as High-Stability Intracellular Nanothermometers

Full-color-tunable hydrogels with ultrahigh stability can be used in various fields, including intracellular temperature sensing. However, constructing full-color-tunable organic nanohydrogels with excellent biocompatibility and stability for intracellular temperature sensing remains a great challenge. Here, we report a full-color-tunable nanohydrogel with ultrahigh stability as an intracellular nanothermometer. Three types of temperature-sensitive polymers with red, green, and blue fluorescence were synthesized. Through easy mixing of these three polymers with regulation of the mass ratio, these polymers can be encoded to full-color-tunable fluorescent nanohydrogels, including nanohydrogels with white-light emission (NWLEs), with sizes of about 200 nm in aqueous media. Further study suggested that the as-obtained NWLEs exhibited good performance in intracellular temperature sensing because of their ultrahigh stability on their fluorescence properties and morphologies.

A Lanthanide Upconversion Nanothermometer for Precise Temperature Mapping on Immune Cell Membrane

Cell temperature monitoring is of great importance to uncover temperature-dependent intracellular events and regulate cellular functions. However, it remains a great challenge to precisely probe the localized temperature status in living cells. Herein, we report a strategy for in situ temperature mapping on an immune cell membrane for the first time, which was achieved by using the lanthanide-doped upconversion nanoparticles. The nanothermometer was designed to label the cell membrane by combining metabolic labeling and click chemistry and can leverage ratiometric upconversion luminescence signals to in situ sensitively monitor temperature variation (1.4% K^-1). Moreover, a purpose-built upconversion hyperspectral microscope was utilized to synchronously map temperature changes on T cell membrane and visualize intracellular Ca²⁺ influx. This strategy was able to identify a suitable temperature status for facilitating thermally stimulated calcium influx in T cells, thus enabling high-efficiency activation of immune cells. Such findings might advance understandings on thermally dependent biological processes and their regulation methodology.

A Ratiometric Organic Fluorescent Nanogel Thermometer for Highly Sensitive Temperature Sensing

Sensing temperature in biological systems is of great importance, as it is constructive to understanding various physiological and pathological processes. However, the realization of highly sensitive temperature sensing with organic fluorescent nanothermometers remains challenging. In this study, we report a ratiometric fluorescent nanogel thermometer and study its application in the determination of bactericidal temperature. The nanogel is composed of a polarity-sensitive aggregation-induced emission luminogen with dual emissions, a thermoresponsive polymer with a phase transition function, and an ionic surface with net positive charges. During temperature-induced phase transition, the nanogel exhibits a reversible and sensitive spectral change between a red-emissive state and a blue-emissive state by responding to the hydrophilic-to-hydrophobic change in the local environment. The correlation between the emission intensity ratio of the two states and the external temperature is delicately established, and the maximum relative thermal sensitivities of the optimal nanogel are determined to be 128.42 and 68.39% °C⁻¹ in water and a simulated physiological environment, respectively. The nanogel is further applied to indicate the bactericidal temperature in both visual and ratiometric ways, holding great promise in the rapid prediction of photothermal antibacterial effects and other temperature-related biological events.

Do compromised mitochondria aggravate severity and fatality by SARS-CoV-2?

At global level, the pandemic coronavirus disease 2019 (COVID-19) is known to be caused by an etiologic agent severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Numerous evidence and propositions have emerged on the molecular and cellular attributes that cause COVID-19. Notwithstanding, still several key questions with reference to molecular aspects of severity of infection by SARS-CoV-2 need to be answered. In the same line, the role of healthy mitochondria to maintain intracellular temperature and their association with the severity of SARS-CoV-2 is completely missing. In this direction, preclinical and clinical data on the comorbidities in the case of mitochondrial defective disease and COVID-19 are not available. The authors propose that patients harboring primary mitochondrial disease and secondary mitochondrial dysfunction will display a higher severity and death rate compared to healthy mitochondria harboring patients.

Color-Tunable Supramolecular Luminescent Materials

Constructing multicolor photoluminescent materials with tunable properties is an attractive research objective on account of their abundant applications in materials science and biomedical engineering. By comparison with covalent synthesis, supramolecular chemistry has provided a more competitive and promising strategy for the production of organic materials and the regulation of their photophysical properties. By taking advantage of dynamic and reversible noncovalent bonding interactions, supramolecular strategies can, not only simplify the design and fabrication of organic materials, but can also endow them with dynamic reversibility and stimuli responsiveness, making it much easier to adjust the superstructures and properties of the materials. Occasionally, it is possible to introduce emergent properties into these materials, which are absent in their precursor compounds, broadening their potential applications. In an attempt to highlight the state-of-the-art noncovalent strategies available for the construction of smart luminescent materials, an overview of color-tunable materials is presented in this Review, with the emphasis being placed on the examples drawn from host-guest complexes, supramolecular assemblies and crystalline materials. The noncovalent synthesis of room-temperature phosphorescent materials and the modulation of their luminescent properties are also described. Finally, future directions and scientific challenges in the emergent field of color-tunable supramolecular emissive materials are discussed.

Luminescence thermometry and field induced slow magnetic relaxation based on a near infrared emissive heterometallic complex

The 1 : 1 : 1 reaction of YbCl₃·6H₂O, K₃[Co(CN)₆] and bpyO₂ in H₂O has provided access to a complex with formula [YbCo(CN)₆(bpyO₂)₂(H₂O)₃]·4H₂O (1) in a very good yield while its structure has been determined by single-crystal X-ray crystallography and characterised based on elemental analyses and IR spectra. Magnetic susceptibility studies showed the complex to be a field induced single molecule magnet, as confirmed by μ-SQUID measurements. CASSCF calculations confirm the existence of a m_J = 7/2 ground state, with rather large transverse components, responsible for the fast relaxation characteristic of compound 1 at zero DC field, which is reduced upon application of DC fields. Moreover, a combination of luminescence studies along with CASSCF calculation allows the identification of the band structure of the complex, which is ultimately related to its electronic properties. Compound 1 operates as a luminescent thermometer in the 125-300 K range with a maximum relative thermal sensitivity of ≈0.1% K^-1 at 180 K.

Intracellular Aβ42 Aggregation Leads to Cellular Thermogenesis

The aggregation of Aβ42 is a hallmark of Alzheimer’s disease. It is still not known what the biochemical changes are inside a cell which will eventually lead to Aβ42 aggregation. Thermogenesis has been associated with cellular stress, the latter of which may promote aggregation. We perform intracellular thermometry measurements using fluorescent polymeric thermometers to show that Aβ42 aggregation in live cells leads to an increase in cell-averaged temperatures. This rise in temperature is mitigated upon treatment with an aggregation inhibitor of Aβ42 and is independent of mitochondrial damage that can otherwise lead to thermogenesis. With this, we present a diagnostic assay which could be used to screen small-molecule inhibitors to amyloid proteins in physiologically relevant settings. To interpret our experimental observations and motivate the development of future models, we perform classical molecular dynamics of model Aβ peptides to examine the factors that hinder thermal dissipation. We observe that this is controlled by the presence of ions in its surrounding environment, the morphology of the amyloid peptides, and the extent of its hydrogen-bonding interactions with water. We show that aggregation and heat retention by Aβ peptides are favored under intracellular-mimicking ionic conditions, which could potentially promote thermogenesis. The latter will, in turn, trigger further nucleation events that accelerate disease progression.

Advantages and Limitations of Fluorescence Lifetime Measurements Using Single-Photon Avalanche Diode (SPAD) Array Detector: A Comprehensive Theoretical and Experimental Study

Fast fluorescence lifetime (FL) determination is a major factor for studying dynamic processes. To achieve a required precision and accuracy a certain number of photon counts must be detected. FL methods based on single-photon counting have strongly limited count rates because of the detector's pile-up issue and are suffering from long measurement times in the order of tens of seconds. Here, we present an experimental and Monte Carlo simulation-based study of how this limitation can be overcome using array detectors based on single-photon avalanche diodes (SPADs). We investigated the maximum count rate per pixel to determine FL with a certain precision and accuracy before pile-up occurs. Based on that, we derived an analytical expression to calculate the total measurement time which is proportional to the FL and inversely proportional to the number of pixels. However, a higher number of pixels drastically increases data rate. This can be counteracted by lowering the time resolution. We found that even with a time resolution of four times the FL, an accuracy of 10% can be achieved. Taken all together, FLs between 10 ns and 3 ns can be determined with a 300-pixel SPAD array detector with a measurement time and data rate less than 1 µs and 700 Mbit/s, respectively. This shows the enormous potential of SPAD array detector for high-speed applications requiring continuous data read out.

Development of a carbon dot and methylene blue NIR-emitting FLIM-FRET pair in niosomes for controlled ROS generation

Non-ionic surfactant vesicular systems (niosomes) are structurally similar to lipid vesicles, differing only in the bilayer composition. Herein we report a unique method to generate reactive oxygen species (ROS) utilizing a FLIM-FRET technique involving niosome-trapped yellow emissive carbon dots (YCDs) and methylene blue (MB) in aqueous medium under neutral conditions. Niosomes are biologically important because of their good stability and extremely low toxicity. Fluorescent CDs, emitting in the higher wavelengths on visible light excitation, are of incredible importance in bio-imaging and optoelectronics. Hence, we prepared nitrogen-containing YCDs from a single precursor, o-phenylenediamine, and explained their detailed photophysics upon incorporation into the niosomal bilayer. The YCDs are polarity sensitive, and are rotationally restricted in niosomes, which increases their fluorescence quantum yield from 29% (in water) to 91%. These YCDs are tactically employed to develop a near infrared (NIR) FRET pair with methylene blue (MB), which is a very well-known type-I and type-II photosensitizer. This FRET pair, which emits in the NIR region, is found to be an ideal system to generate ROS by excitation in the lower visible wavelengths. Interestingly, the ROS production by MB from the dissolved oxygen is enhanced inside the niosomes. The donor and the acceptor moieties in this unique NIR-emitting FRET pair display an unprecedented 300 nm Stokes shift. The findings could be influential in bio-imaging in the NIR region evading cellular autofluorescence and the controllably generated ROS can be further applied as a potential photodynamic therapeutic agent.

High Resolution Fluorescence Lifetime Maps from Minimal Photon Counts

Fluorescence lifetime imaging microscopy (FLIM) may reveal subcellular spatial lifetime maps of key molecular species. Yet, such a quantitative picture of life necessarily demands high photon budgets at every pixel under the current analysis paradigm, thereby increasing acquisition time and photodamage to the sample. Motivated by recent developments in computational statistics, we provide a direct means to update our knowledge of the lifetime maps of species of different lifetimes from direct photon arrivals, while accounting for experimental features such as arbitrary forms of the instrument response function (IRF) and exploiting information from empty laser pulses not resulting in photon detection. Our ability to construct lifetime maps holds for arbitrary lifetimes, from short lifetimes (comparable to the IRF) to lifetimes exceeding interpulse times. As our method is highly data efficient, for the same amount of data normally used to determine lifetimes and photon ratios, working within the Bayesian paradigm, we report direct blind unmixing of lifetimes with subnanosecond resolution and subpixel spatial resolution using standard raster scan FLIM images. We demonstrate our method using a wide range of simulated and experimental data.

Fluorescence Thermometer: Intermediation of the Fontal Temperature and Light

The rapid advance of thermal materials and fluorescence spectroscopy has extensively promoted micro-scale fluorescence thermometry development in recent years. Based on the advantages of fast response, high sensitivity, simple operation,...

Fast wide-field upconversion luminescence lifetime thermometry enabled by single-shot compressed ultrahigh-speed imaging

Photoluminescence lifetime imaging of upconverting nanoparticles is increasingly featured in recent progress in optical thermometry. Despite remarkable advances in photoluminescent temperature indicators, existing optical instruments lack the ability of wide-field photoluminescence lifetime imaging in real time, thus falling short in dynamic temperature mapping. Here, we report video-rate upconversion temperature sensing in wide field using single-shot photoluminescence lifetime imaging thermometry (SPLIT). Developed from a compressed-sensing ultrahigh-speed imaging paradigm, SPLIT first records wide-field luminescence intensity decay compressively in two views in a single exposure. Then, an algorithm, built upon the plug-and-play alternating direction method of multipliers, is used to reconstruct the video, from which the extracted lifetime distribution is converted to a temperature map. Using the core/shell NaGdF4:Er3+,Yb3+/NaGdF4 upconverting nanoparticles as the lifetime-based temperature indicators, we apply SPLIT in longitudinal wide-field temperature monitoring beneath a thin scattering medium. SPLIT also enables video-rate temperature mapping of a moving biological sample at single-cell resolution.

Fluorescent Molecular Logic Gates Driven by Temperature and by Protons in Solution and on Solid

Temperature-driven fluorescent NOT logic is demonstrated by exploiting predissociation in a 1,3,5-trisubstituted Δ² -pyrazoline on its own and when grafted onto silica microparticles. Related Δ² -pyrazolines become proton-driven YES and NOT logic gates on the basis of fluorescent photoinduced electron transfer (PET) switches. Additional PASS 1 and YES+PASS 1 logic gates on silica are also demonstrated within the same family. Beside these small-molecule systems, a polymeric molecular thermometer based on a benzofurazan-derivatized N-isopropylacrylamide copolymer is attached to silica to produce temperature-driven fluorescent YES logic.

Highly efficient ratiometric nanothermometers based on colloidal carbon quantum dots

Optical nanothermometers have attracted much attention due to their non-contact and precise measurement with high spatial resolution at the micro- and nanoscales. They can be applied in various fields such as micro-opto-electronics, photonics, and biomedical thermal and pH sensing, while most thermal sensors reported so far contain heavy metals or have low sensitivity. Herein, we demonstrate a highly sensitive ratiometric thermal sensor based on colloidal C-dots. C-dots exhibit dual emission originating from the band gap emission and surface-dominant emission, which show a different temperature-dependent photoluminescence (PL) response. Among different surface-functionalized C-dots, C-dots@OH exhibit an absolute thermal sensitivity of -0.082 °C-1, which is the highest among various types of ratiometric thermosensors, making it a very promising candidate for high-sensitivity, self-calibrated nanoscale thermometry. As a proof-of-concept, C-dots@OH were employed to monitor the intracellular temperature (32-42 °C), showing a clear trend for temperature variation in a single cell, indicating that C-dots could offer a powerful tool for a potential precise measurement of the intracellular temperature. They could also be used as thermal sensors for nano-electronic and optoelectronic devices.

A Sensitive and Reliable Organic Fluorescent Nanothermometer for Noninvasive Temperature Sensing

Sensing temperature at the subcellular level is of great importance for the understanding of miscellaneous biological processes. However, the development of sensitive and reliable organic fluorescent nanothermometers remains challenging. In this study, we report the fabrication of a novel organic fluorescent nanothermometer and study its application in temperature sensing. First of all, we synthesize a dual-responsive organic luminogen that can respond to the molecular state of aggregation and environmental polarity. Next, natural saturated fatty acids with sharp melting points as well as reversible and rapid phase transition are employed as the encapsulation matrix to correlate external heat information with the fluorescence properties of the luminogen. To apply the composite materials for biological application, we formulate them into colloidally dispersed nanoparticles by a technique that combines in situ surface polymerization and nanoprecipitation. As anticipated, the resultant zwitterionic nanothermometer exhibits sensitive, reversible, reliable, and multiparametric responses to temperature variation within a narrow range around the physiological temperature (i.e., 37 °C). Taking spectral position, fluorescence intensity, and fluorescence lifetime as the correlation parameters, the maximum relative thermal sensitivities are determined to be 2.15% °C^-1, 17.06% °C^-1, and 17.72% °C^-1, respectively, which are much higher than most fluorescent nanothermometers. Furthermore, we achieve the multimodal temperature sensing of bacterial biofilms using these three complementary fluorescence parameters. Besides, we also fabricate a cationic form of the nanothermometer to facilitate efficient cellular uptake, holding great promise for studying thermal behaviors in biological systems.

Recent Progress of Alkyl Radicals Generation-Based Agents for Biomedical Applications

Photodynamic therapy (PDT) is extensively explored for anticancer and antibacterial applications. It typically relies on oxygen-dependent generation of reactive oxygen species (ROS) to realize its killing effect. This type of therapy modality shows compromised therapeutic results for treating hypoxic tumors or bacteria-infected wounds. Recently, alkyl radicals attracted much attention as they can be generated from some azo-based initiators only under mild heat stimulus without oxygen participation. Many nanocarriers or hydrogel systems have been developed to load and deliver these radical initiators to lesion sites for theranostics. These systems show good anticancer or antimicrobial effect in hypoxic environment and some of them possess specific imaging abilities providing precise guidance for treatment. This review summarizes the developed materials that aim at treating hypoxic cancer and bacteria-infected wound by using this kind of oxygen-irrelevant alkyl radicals. Based on the carrier components, these agents are divided into three groups: inorganic, organic, as well as inorganic and organic hybrid carrier-based therapeutic systems. The construction of these agents and their specific advantages in biomedical field are highlighted. Finally, the existing problems and future promising development directions are discussed.

Quantitatively Monitoring In Situ Mitochondrial Thermal Dynamics by Upconversion Nanoparticles

Temperature dynamics reflect the physiological conditions of cells and organisms. Mitochondria regulate the temperature dynamics in living cells as they oxidize the respiratory substrates and synthesize ATP, with heat being released as a byproduct of active metabolism. Here, we report an upconversion nanoparticle-based thermometer that allows the in situ thermal dynamics monitoring of mitochondria in living cells. We demonstrate that the upconversion nanothermometers can efficiently target mitochondria, and the temperature-responsive feature is independent of probe concentration and medium conditions. The relative sensing sensitivity of 3.2% K^-1 in HeLa cells allows us to measure the mitochondrial temperature difference through the stimulations of high glucose, lipid, Ca²⁺ shock, and the inhibitor of oxidative phosphorylation. Moreover, cells display distinct response time and thermodynamic profiles under different stimulations, which highlight the potential applications of this thermometer to study in situ vital processes related to mitochondrial metabolism pathways and interactions between organelles.

Theoretical investigations of a modified compressed ultrafast photography method suitable for single-shot fluorescence lifetime imaging

A single-shot fluorescence lifetime imaging (FLIM) method based on the compressed ultrafast photography (CUP) is proposed, named space-restricted CUP (srCUP). srCUP is suitable for imaging objects moving slowly (<∼150/Mmm/s, M is the magnification of the objective lens) in the field of view with the intensity changing within nanoseconds in a measurement window around 10 ns. We used synthetic datasets to explore the performances of srCUP compared with CUP and TCUP (a variant of CUP). srCUP not only provides superior reconstruction performances, but its reconstruction speed is also twofold and threefold faster than CUP and TCUP, respectively. The lifetime determination performances were assessed by estimating lifetime components, amplitude- and intensity-weighted average lifetimes (τ_A and τ_I), with the reconstructed scenes using the least squares method based on a bi-exponential model. srCUP has the best accuracy and precision for lifetime determinations with a relative bias less than 7% and a coefficient of variation less than 7% for τ_A, and a relative bias less than 10% and a coefficient of variation less than 11% for τ_I.

Improving magnetic nanothermometry accuracy through mixing-frequency excitation

This study proposes a temperature model for the relaxation of magnetic nanoparticles and a phase measurement method under a mixing-frequency excitation field, which can improve the accuracy of temperature measurements in magnetic nanothermometry. According to the Debye-based magnetization model for magnetic nanoparticles, phases at mixing frequencies are used to solve the problem of a delay in the relaxation phase of the magnetic field at a high frequency. This method can improve the signal-to-noise ratio of the response of the magnetic nanoparticles and weaken the phase shift of the detection coils caused by the changes in temperature. The results of experiments show that the proposed method can achieve static temperature measurement error less than 0.1 K and dynamic temperature measurement error less than 0.2 K.

Intracellular Thermometry at the Micro-/Nanoscale and its Potential Application to Study Protein Aggregation Related to Neurodegenerative Diseases

Temperature is a fundamental physical parameter that influences biological processes in living cells. Hence, intracellular temperature mapping can be used to derive useful information reflective of thermodynamic properties and cellular behaviour. Herein, existing publications on different thermometry systems, focusing on those that employ fluorescence-based techniques, are reviewed. From developments based on fluorescent proteins and inorganic molecules to metal nanoclusters and fluorescent polymers, the general findings of intracellular measurements from different research groups are discussed. Furthermore, the contradiction of mitochondrial thermogenesis and nuclear-cytoplasmic temperature differences to current thermodynamic understanding are highlighted. Lastly, intracellular thermometry is proposed as a tool to quantify the energy flow and cost associated with amyloid-β42 (Aβ42) aggregation, a hallmark of Alzheimer's disease.

Long-Range LMCT Coupling in EuIII Coordination Polymers for an Effective Molecular Luminescent Thermometer*

A design for an effective molecular luminescent thermometer based on long-range electronic coupling in lanthanide coordination polymers is proposed. The coordination polymers are composed of lanthanide ions Eu^III and Gd^III , three anionic ligands (hexafluoroacetylacetonate), and a chrysene-based phosphine oxide bridges (6,12-bis(diphenylphosphoryl)chrysene). The zig-zag orientation of the single polymer chains induces the formation of packed coordination structures containing multiple sites for CH-F intermolecular interactions, resulting in thermal stability above 350 °C. The electronic coupling is controlled by changing the concentration of the Gd^III ion in the Eu^III -Gd^III polymer. The emission quantum yield and the maximum relative temperature sensitivity (S_m ) of emission lifetimes for the Eu^III -Gd^III polymer (Eu:Gd=1:1, Φ_tot =52 %, S_m =3.73 % K^-1 ) were higher than those for the pure Eu^III coordination polymer (Φ_tot =36 %, S_m =2.70 % K^-1 ), respectively. Enhanced temperature sensing properties are caused by control of long-range electronic coupling based on phosphine oxide with chrysene framework.

Pitfalls in Monitoring Mitochondrial Temperature Using Charged Thermosensitive Fluorophores

Mitochondria are the source of internal heat which influences all cellular processes. Hence, monitoring mitochondrial temperature provides a unique insight into cell physiology. Using a thermosensitive fluorescent probe MitoThermo Yellow (MTY), we have shown recently that mitochondria within human cells are maintained at close to 50 °C when active, increasing their temperature locally by about 10 °C. Initially reported in the HEK293 cell line, we confirmed this finding in the HeLa cell line. Delving deeper, using MTY and MTX (MitoThermo X), a modified version of MTY, we unraveled some caveats related to the nature of these charged fluorophores. While enabling the assessment of mitochondrial temperature in HEK and HeLa cell lines, the reactivity of MTY to membrane potential variations in human primary skin fibroblasts precluded local temperature monitoring in these cells. Chemical modification of MTY into MTX did not result in a temperature probe unresponsive to membrane potential variations that could be universally used in any cell type to determine mitochondrial temperature. Thus, the cell-type dependence of MTY in measuring mitochondrial temperature, which is likely due to the variable binding of this dye to specific internal mitochondrial components, should imply cautiousness while using these nanothermometers for mitochondrial temperature analysis.

Real-Time Intracellular Temperature Imaging Using Lanthanide-Bearing Polymeric Micelles

Measurement of thermogenesis in individual cells is a remarkable challenge due to the complexity of the biochemical environment (such as pH and ionic strength) and to the rapid and yet not well-understood heat transfer mechanisms throughout the cell. Here, we present a unique system for intracellular temperature mapping in a fluorescence microscope (uncertainty of 0.2 K) using rationally designed luminescent Ln³⁺-bearing polymeric micellar probes (Ln = Sm, Eu) incubated in breast cancer MDA-MB468 cells. Two-dimensional (2D) thermal images recorded increasing the temperature of the cells culture medium between 296 and 304 K shows inhomogeneous intracellular temperature progressions up to ∼20 degrees and subcellular gradients of ∼5 degrees between the nucleolus and the rest of the cell, illustrating the thermogenic activity of the different organelles and highlighting the potential of this tool to study intracellular processes.

Robust liquid-core nanocapsules as biocompatible and precise ratiometric fluorescent thermometers for living cells

Intracellular thermometry with favorable biocompatibility and precision is essential for insight into temperature-related cellular events. Here, liquid-core nanocapsule ratiometric fluorescent thermometers (LCN-RFTs) were prepared by encapsulating thermosensitive organic fluorophores (N,N'-di(2-ethylhexyl)-3,4,9,10-perylene tetracarboxylic diimide, DEH-PDI) with hydrophobic solvent (2,2,4-trimethylpentane, TMP) into polystyrene/silica hybrid nanoshells. As the fluorescent thermosensitive unit of the LCN-RFT, the TMP solution of DEH-PDI was responsible for the fluorescence response to temperature. Benefitting from the hydrophilic nanoshells, the LCN-RFTs exhibited favorable anti-interference and biocompatibility. Furthermore, the LCN-RFTs showed an excellent precision of 0.02 °C-0.10 °C in a simulated physiological environment from 10.00 °C to 90.00 °C, and were employed to realize intracellular thermometry with an outstanding precision of 0.06 °C-0.14 °C. This work provides a feasible method of using hydrophobic organic fluorophores for intracellular thermometry by encapsulating them into nanocapsules.

Stimulated emission assisted time-gated detection of a solid-state spin

The nitrogen vacancy (NV) center in diamond is studied widely for magnetic field and temperature sensing at the nanoscale. Usually, the fluorescence is recorded to estimate the spin state of the NV center. Here we applied a time-gating technique to improve the contrast of the spin-dependent fluorescence. A NIR pulsed laser pumped the stimulated emission of the NV center and depleted the spontaneous emission that was excited by a green laser. We changed the relative delay between the NIR laser and the green laser. Then the spontaneous emission of the NV center in varied time windows was extracted by comparing the fluorescence intensities with and without the NIR laser. The results showed that the spin-dependent fluorescence contrast could be improved by approximately 1.8 times by applying the time gating. The background of the environment was eliminated due to temporal filtering. This work demonstrates that the stimulated emission assisted time-gating technique can be used to improve the performance of an NV center sensor in a noisy environment.

Fluorescence lifetime imaging microscopy: fundamentals and advances in instrumentation, analysis, and applications

SIGNIFICANCE

Fluorescence lifetime imaging microscopy (FLIM) is a powerful technique to distinguish the unique molecular environment of fluorophores. FLIM measures the time a fluorophore remains in an excited state before emitting a photon, and detects molecular variations of fluorophores that are not apparent with spectral techniques alone. FLIM is sensitive to multiple biomedical processes including disease progression and drug efficacy.

AIM

We provide an overview of FLIM principles, instrumentation, and analysis while highlighting the latest developments and biological applications.

APPROACH

This review covers FLIM principles and theory, including advantages over intensity-based fluorescence measurements. Fundamentals of FLIM instrumentation in time- and frequency-domains are summarized, along with recent developments. Image segmentation and analysis strategies that quantify spatial and molecular features of cellular heterogeneity are reviewed. Finally, representative applications are provided including high-resolution FLIM of cell- and organelle-level molecular changes, use of exogenous and endogenous fluorophores, and imaging protein-protein interactions with Förster resonance energy transfer (FRET). Advantages and limitations of FLIM are also discussed.

CONCLUSIONS

FLIM is advantageous for probing molecular environments of fluorophores to inform on fluorophore behavior that cannot be elucidated with intensity measurements alone. Development of FLIM technologies, analysis, and applications will further advance biological research and clinical assessments.

Enrichment of rare events using a multi-parameter high throughput microfluidic droplet sorter

High information content analysis, enrichment, and selection of rare events from a large population are of great importance in biological and biomedical research. The fluorescence lifetime of a fluorophore, a photophysical property which is independent of and complementary to fluorescence intensity, has been incorporated into various imaging and sensing techniques through microscopy, flow cytometry and droplet microfluidics. However, the throughput of fluorescence lifetime activated droplet sorting is orders of magnitude lower than that of fluorescence activated cell sorting, making it unattractive for applications such as directed evolution of enzymes, despite its highly effective compartmentalization of library members. We developed a microfluidic sorter capable of selecting fluorophores based on fluorescence lifetime and brightness at two excitation and emission colors at a maximum droplet rate of 2.5 kHz. We also present a novel selection strategy for efficiently analyzing and/or enriching rare fluorescent members from a large population which capitalizes on the Poisson distribution of analyte encapsulation into droplets. The effectiveness of the droplet sorter and the new selection strategy are demonstrated by enriching rare populations from a ∼108-member site-directed mutagenesis library of fluorescent proteins expressed in bacteria. This selection strategy can in principle be employed on many droplet sorting platforms, and thus can potentially impact broad areas of science where analysis and enrichment of rare events is needed.

Long-living and highly efficient bio-hybrid light-emitting diodes with zero-thermal-quenching biophosphors

Bio-hybrid light-emitting diodes (Bio-HLEDs) based on color down-converting filters with fluorescent proteins (FPs) have achieved moderate efficiencies (50 lm/W) and stabilities (300 h) due to both thermal- and photo-degradation. Here, we present a significant enhancement in efficiency (~130 lm/W) and stability (>150 days) using a zero-thermal-quenching bio-phosphor design. This is achieved shielding the FP surface with a hydrophilic polymer allowing their homogenous integration into the network of a light-guiding and hydrophobic host polymer. We rationalize how the control of the mechanical and optical features of this bio-phosphor is paramount towards highly stable and efficient Bio-HLEDs, regardless of the operation conditions. This is validated by the relationships between the stiffness of the FP-polymer phosphor and the maximum temperature reached under device operation as well as the transmittance of the filters and device efficiency.

Insights into the Luminescence Thermochromism of a Triarylboron Derivative: The Role of Intramolecular Group Interaction

The organic fluorescent probes for temperature have received increasing interest due to their extremely high spatial and temporal resolution. A few of triarylboron derivatives, as almost the only molecular probes consisting of a single luminophore, have the ability to change their luminescent color at different temperatures. The mechanism of their luminescence thermochromism is controversial. Herein, several spectral experiments, along with time-dependent density functional theory (TDDFT) and coupled-cluster (CC) calculations, are carried out to elucidate the temperature-dependent luminescence. The CC rather than the TDDFT methods give a relatively reasonable explanation for the experimental results. Consequently, the thermochromism is now considered as the result of conformational thermal equilibria that occur in both the excited and ground states. Besides, an unusual conformer with intramolecular excimer characteristic plays a crucial role in the attractive luminescence behavior.

AIE-active non-conjugated poly(N-vinylcaprolactam) as a fluorescent thermometer for intracellular temperature imaging

Since temperature is one of the most significant physiological parameters that dictate the cellular status of living organisms, accurate intracellular temperature measurement is crucial and a valuable biomarker for the diagnosis and treatment of diseases. Herein, we introduce the foremost example of a non-conjugated polymer as a next generation fluorescent thermometer which is capable of addressing the key shortcomings including toxicity and thermal-induced fluorescence quenching associated with π-π conjugated system-based thermometers developed so far. We revealed, for the first time, the unique photophysical and aggregation-induced emission (AIE) characteristics of well-known thermoresponsive poly(N-vinylcaprolactam) (PNVCL) devoid of any classical fluorophore entity. PNVCL underwent a coil to globular conformational transition in an aqueous medium and appeared to be fluorescent above its lower critical solution temperature (LCST) near body temperature (38 °C). Eventually, this intriguing aspect enabled higher cellular uptake of PNVCL at the LCST boundary. By virtue of the AIE effect, the thermo-induced aggregation phenomenon has been ingeniously utilized to apply PNVCL as a novel fluorescent thermometer for intracellular temperature determination.