Catechol-Functional Chitosan/Silver Nanoparticle Composite as a Highly Effective Antibacterial Agent with Species-Specific Mechanisms

Effect of Mexican Propolis on Wound Healing in a Murine Model of Diabetes Mellitus

Diabetes mellitus (DM) affects the wound healing process, resulting in impaired healing or aberrant scarring. DM increases reactive oxygen species (ROS) production, fibroblast senescence and angiogenesis abnormalities, causing exacerbated inflammation accompanied by low levels of TGF-β and an increase in Matrix metalloproteinases (MMPs). Propolis has been proposed as a healing alternative for diabetic patients because it has antimicrobial, anti-inflammatory, antioxidant and proliferative effects and important properties in the healing process. An ethanolic extract of Chihuahua propolis (ChEEP) was obtained and fractionated, and the fractions were subjected to High-Performance Liquid Chromatography with diode-array (HPLC-DAD), High-Performance Liquid Chromatography-Mass Spectrometry (HPLC-MS) and Gas Chromatography-Mass Spectrometry (GC-MS) analyses and 46 compounds were detected. Deep wounds were made in a murine DM model induced by streptozotocin, and the speed of closure and the wound tensile strength were evaluated by the tensiometric method, which showed that ChEEP had similar activity to Recoveron, improving the speed of healing and increasing the wound tensile strength needed to open the wound again. A histological analysis of the wounds was performed using H&E staining, and when Matrix metalloproteinase 9 (MMP9) and α-actin were quantified by immunohistochemistry, ChEEP was shown to be associated with improved histological healing, as indicated by the reduced MMP9 and α-actin expression. In conclusion, topical ChEEP application enhances wound healing in diabetic mice.

Synthesis, characterization, and antibacterial activity of chitosan-chelated silver nanoparticles

Bacterial infections pose a significant threat to human health and safety, necessitating the urgent resolution of the problem through the development and implementation of highly effective antibacterial agents. However, the emergence of multidrug-resistant bacteria has diminished the satisfactory effectiveness of antibacterial treatments. To overcome this obstacle, we developed effective antibacterial agents by chemical reduction for inhibiting bacterial proliferation and inducing membrane damage. Specifically, four different types of chitosan/Ag nanoparticle (CS-AgNPs-i) (i-1, 2, 3, 4) complexes were synthesized by varying the quantity of chitosan added during the synthesis process. We found that the amount of CS does not affect the morphology and size of CS-AgNPs-i, which remained at approximately 20 nm and all CS-AgNPs were mostly spherical. The zeta potential measurements indicated that the surface of CS-AgNPs carries a positive charge. Notably, elevating the chitosan concentration led to a more pronounced antibacterial impact, particularly evident in its interaction with the peptidoglycan layer on the bacterial surface. Our experimental results undeniably establish the potent antibacterial efficacy of CS-AgNPs against both Escherichia coli and Staphylococcus aureus. Employing live/dead bacterial staining, we reveal the marked capability of CS-AgNPs to effectively hinder bacterial proliferation. Furthermore, our experimental investigations revealed that CS-AgNPs possess broad-spectrum antimicrobial activity. The results of in vitro cytotoxicity experiments substantiated the high biocompatibility of CS-AgNPs with elevated chitosan loading. The study provides valuable insights into the development of nano-antibacterial agents that exhibit significant potential as a substitute to replace traditional antibiotics for medical applications.

Silver/Graphene Oxide Nanostructured Coatings for Modulating the Microbial Susceptibility of Fixation Devices Used in Knee Surgery

Exploring silver-based and carbon-based nanomaterials' excellent intrinsic antipathogenic effects represents an attractive alternative for fabricating anti-infective formulations. Using chemical synthesis protocols, stearate-conjugated silver (Ag@C18) nanoparticles and graphene oxide nanosheets (nGOs) were herein obtained and investigated in terms of composition and microstructure. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) characterizations revealed the formation of nanomaterials with desirable physical properties, while X-ray diffraction (XRD) analyses confirmed the high purity of synthesized nanomaterials. Further, laser-processed Ag@C18-nGO coatings were developed, optimized, and evaluated in terms of biological and microbiological outcomes. The highly biocompatible Ag@C18-nGO nanostructured coatings proved suitable candidates for the local modulation of biofilm-associated periprosthetic infections.

Perspectives on Usage of Functional Nanomaterials in Antimicrobial Therapy for Antibiotic-Resistant Bacterial Infections

The clinical applications of nanotechnology are emerging as widely popular, particularly as a potential treatment approach for infectious diseases. Diseases associated with multiple drug-resistant organisms (MDROs) are a global concern of morbidity and mortality. The prevalence of infections caused by antibiotic-resistant bacterial strains has increased the urgency associated with researching and developing novel bactericidal medicines or unorthodox methods capable of combating antimicrobial resistance. Nanomaterial-based treatments are promising for treating severe bacterial infections because they bypass antibiotic resistance mechanisms. Nanomaterial-based approaches, especially those that do not rely on small-molecule antimicrobials, display potential since they can bypass drug-resistant bacteria systems. Nanoparticles (NPs) are small enough to pass through the cell membranes of pathogenic bacteria and interfere with essential molecular pathways. They can also target biofilms and eliminate infections that have proven difficult to treat. In this review, we described the antibacterial mechanisms of NPs against bacteria and the parameters involved in targeting established antibiotic resistance and biofilms. Finally, yet importantly, we talked about NPs and the various ways they can be utilized, including as delivery methods, intrinsic antimicrobials, or a mixture.

Healing Efficacy of Hesperetin-Containing Chitosan Gel in Burn Wound: Formulation Design and In Vivo Evaluation

More than 5 million people require medical attention due to burn-related injuries annually. Significant research has been carried out in recent decades to develop approaches to improve the healing of burn wounds. The focus has also been on the development of natural product-based therapeutic remedies for the treatment of burn wounds. This has been done primarily due to multimodal mechanisms exhibited by some promising bioactive molecules of natural origin. Hesperetin is one such molecule that possesses strong anti-inflammatory and antioxidant properties. It is mainly obtained from citrus species. The goal of the current study was to assess how well chitosan gel that contains hesperetin may cure burn wounds. The advantage of using chitosan gel is that it could form a depot at the site and provide a protective therapeutic covering over burn wounds. In the present study, hesperetin-containing chitosan gel was prepared and evaluated for percentage hesperetin content, extrudability, spreadability, and rheological behavior. The preclinical wound healing activity was evaluated using an experimental burn wound model in Wistar rats. The results of the animal experiment showed early and better healing of burn wounds in animals treated with hesperetin-containing chitosan gel. There was 92.79% healing after 14 days of application of hesperetin-containing chitosan gel compared to 69.49% healing observed in the control group. Further, the histopathological evaluation suggested no inflammatory cell infiltration, normal epidermal growth, and normal collagen bundle arrangement in these animals. Overall the results provide proof of concept to establish the wound healing potential of hesperetin-containing chitosan gel against burn wounds.

Antibacterial nanopatterned coatings for dental implants

Dental implants, usually made of titanium, are exposed to hostile oral microflora that facilitate bacterial infections and subsequent inflammation. To mitigate these processes, we coated titanium substrates with block copolymer nanopatterns and investigated the bactericidal effect of these coatings against Gram-positive and Gram-negative bacteria. We found that the bactericidal efficacy of the coatings depends on their morphology and surface chemistry as well as on the bacterial strain: an optimal combination can lead to significant bacterial death for a short time, i.e. 90% for 90 min. Human gingival fibroblasts in contact with the nanopatterned coatings showed similar cell attachment and morphology as on bare Ti. Immunostaining assays showed similar levels of CCR7 and CD206 in macrophages cultured over the nanopatterns and bare Ti, demonstrating adequate properties for tissue integration. The nanopatterns induced a small increase in macrophage aspect ratio, which might indicate early states of M2 polarization, given the absence of CD206.

Bactericidal Anti-Adhesion Potential Integrated Polyoxazoline/Silver Nanoparticle Composite Multilayer Film with pH Responsiveness

Bacterial infections occur frequently during the implantation of medical devices, and functional coating is one of the effective means to prevent and remove biofilms. In this study, three different hydrophilic polyoxazolines with carboxyl groups (aPOx: PT1, PT2 and PT3) and bactericidal silver nanoparticles (AgNPs) were synthesized successfully, and an aPOx-AgNP multilayer film was prepared by electrostatic layer-by-layer self-assembly. The effect of charge density and assembly solution concentration was explored, and the optimal self-assembly parameters were established (PT2 1 mg/mL and AgNPs 3 mg/mL). The hydrophilicity of the surface can be enhanced to resist protein adhesion if the outermost layer is aPOx, and AgNPs can be loaded to kill bacteria, thereby realizing the bactericidal anti-adhesion potential integration of the aPOx-AgNP multilayer film. In addition, the aPOx-AgNP multilayer film was found to have the characteristic of intelligent and efficient pH-responsive silver release, which is expected to be used as a targeted anti-biofilm surface of implantable medical devices.

Moringa concanensis-Mediated Synthesis and Characterizations of Ciprofloxacin Encapsulated into Ag/TiO2/Fe2O3/CS Nanocomposite: A Therapeutic Solution against Multidrug Resistant E. coli Strains of Livestock Infectious Diseases

Background: Multidrug resistant MDR bacterial strains are causing fatal infections, such as mastitis. Thus, there is a need for the development of new target-oriented antimicrobials. Nanomaterials have many advantages over traditional antibiotics, including improved stability, controlled antibiotic release, targeted administration, enhanced bioavailability, and the use of antibiotic-loaded nanomaterials, such as the one herein reported for the first time, appear to be a promising strategy to combat antibiotic-resistant bacteria. The use of rationally designed metallic nanocomposites, rather than the use of single metallic nanoparticles (NPs), should further minimize the bacterial resistance. Aim: Green synthesis of a multimetallic/ternary nanocomposite formed of silver (Ag), titanium dioxide (TiO2), and iron(III) oxide (Fe2O3), conjugated to chitosan (CS), in which the large spectrum fluoroquinolone antibiotic ciprofloxacin (CIP) has been encapsulated. Methods: The metallic nanoparticles (NPs) Ag NPs, TiO2 NPs, and Fe2O3 NPs were synthesized by reduction of Moringa concanensis leaf aqueous extract. The ternary junction was obtained by wet chemical impregnation technique. CIP was encapsulated into the ternary nanocomposite Ag/TiO2/Fe2O3, followed by chitosan (CS) conjugation using the ionic gelation method. The resulting CS-based nanoparticulate drug delivery system (NDDS), i.e., CIP-Ag/TiO2/Fe2O3/CS, was characterized in vitro by gold standard physical techniques such as X-ray diffractometry (XRD), field emission scanning electron microscopy (FESEM), Fourier-transform infrared (FTIR) spectroscopy. Pharmacological analyses (i.e., LC, EE, ex-vivo drug release behavior) were also assessed. Further, biological studies were carried out both ex vivo (i.e., by disk diffusion method (DDM), fluorescence-activated single cell sorting (FACS), MTT assay) and in vivo (i.e., antibacterial activity in a rabbit model, colony-forming unit (CFU) on blood agar, histopathological analysis using H&E staining). Results: The encapsulation efficiency (EE) and the loading capacity (LC) of the NDDS were as high as 94% ± 1.26 and 57% ± 3.5, respectively. XRD analysis confirmed the crystalline nature of the prepared formulation. FESEM revealed nanorods with an average diameter of 50−70 ± 12 nm. FTIR confirmed the Fe-O-Ti-CS linkages as well as the successful encapsulation of CIP into the NDDS. The zeta potential (ZP) of the NDDS was determined as 85.26 ± 0.12 mV. The antimicrobial potential of the NDDS was elicited by prominent ZIs against MDR E. coli (33 ± 1.40 mm) at the low MIC of 0.112 μg/mL. Morphological alterations (e.g., deformed shape and structural damages) of MDR pathogens were clearly visible overtime by FESEM after treatment with the NDDS at MIC value, which led to the cytolysis ultimately. FACS analysis confirmed late apoptotic of the MDR E. coli (80.85%) after 6 h incubation of the NDDS at MIC (p < 0.05 compared to untreated MDR E. coli used as negative control). The highest drug release (89% ± 0.57) was observed after 8 h using PBS medium at pH 7.4. The viability of bovine mammary gland epithelial cells (BMGE) treated with the NDDS remained superior to 90%, indicating a negligible cytotoxicity (p < 0.05). In the rabbit model, in which infection was caused by injecting MDR E. coli intraperitoneally (IP), no colonies were detected after 72 h of treatment. Importantly, the histopathological analysis showed no changes in the vital rabbit organs in the treated group compared to the untreated group. Conclusions: Taken together, the newly prepared CIP-Ag/TiO2/Fe2O3/CS nanoformulation appears safe, biocompatible, and therapeutically active to fight MDR E. coli strains-causing mastitis.

Inactivation of SARS-CoV-2 by a chitosan/α-Ag2WO4 composite generated by femtosecond laser irradiation

In the current COVID-19 pandemic, the next generation of innovative materials with enhanced anti-SARS-CoV-2 activity is urgently needed to prevent the spread of this virus within the community. Herein, we report the synthesis of chitosan/α-Ag₂WO₄ composites synthetized by femtosecond laser irradiation. The antimicrobial activity against Escherichia coli, Methicilin-susceptible Staphylococcus aureus (MSSA), and Candida albicans was determined by estimating the minimum inhibitory concentration (MIC) and minimal bactericidal/fungicidal concentration (MBC/MFC). To assess the biocompatibility of chitosan/α-Ag₂WO₄ composites in a range involving MIC and MBC/MFC on keratinocytes cells (NOK-si), an alamarBlue™ assay and an MTT assay were carried out. The SARS-CoV-2 virucidal effects was analyzed in Vero E6 cells through viral titer quantified in cell culture supernatant by PFU/mL assay. Our results showed a very similar antimicrobial activity of chitosan/α-Ag₂WO₄ 3.3 and 6.6, with the last one demonstrating a slightly better action against MSSA. The chitosan/α-Ag₂WO₄ 9.9 showed a wide range of antimicrobial activity (0.49-31.25 µg/mL). The cytotoxicity outcomes by alamarBlue™ revealed that the concentrations of interest (MIC and MBC/MFC) were considered non-cytotoxic to all composites after 72 h of exposure. The Chitosan/α-Ag₂WO₄ (CS6.6/α-Ag₂WO₄) composite reduced the SARS-CoV-2 viral titer quantification up to 80% of the controls. Then, our results suggest that these composites are highly efficient materials to kill bacteria (Escherichia coli, Methicillin-susceptible Staphylococcus aureus, and the yeast strain Candida albicans), in addition to inactivating SARS-CoV-2 by contact, through ROS production.

Antimicrobial activity of chemically and biologically synthesized silver nanoparticles against some fish pathogens

Pathogens isolated from fish appear to possess considerable antimicrobial resistance and represent a problem for the economy and public health. Natural antimicrobial substitutes to traditional antibiotics represent an essential tool in the fight against antibiotic resistance. Nanotechnology has shown considerable potential in different research fields, and the antimicrobial properties of silver nanoparticles are known. Silver has been used for medical purposes since ancient times because of its bactericidal properties, and the highly reactive surfaces of silver nanoparticles (AgNPs) indicate that they might have a function in antimicrobial applications. This work aimed to study the antimicrobial properties of biologically produced AgNPs from Origanum vulgare leaves compared to chemically produced AgNPs. Both types were characterized by UV–vis spectrophotometry, TEM, and dynamic light scattering and tested against three bacterial strains (Streptococcus agalactiae, and Aeromonas hydrophila, both isolated from Nile tilapia and Vibrio alginolyticus, isolated from sea bass) and three fungal strains (Aspergillus flavus, Fusarium moniliforme, and Candida albicans, all isolated from Nile tilapia). Disk diffusion test and evaluation of ultrastructure changes of tested microorganisms treated with AgNPs by transmission electron microscopy were performed. Moreover, the hemolytic properties of AgNPs were studied on chicken and goat red blood cells. The results obtained declare that the green biological production of silver nanoparticles is safer and more effective than the chemical one; moreover, AgNPs have interesting dose-dependent antimicrobial properties, with better results for biologically produced ones; their effectiveness against tested bacterial and fungal strains opens the way to their use to limit fish diseases, increase economy and improve human health.

One-pot biofabrication and characterization of Tara gum/Riceberry phenolics-silver nanogel: A cytocompatible and green nanoplatform with multifaceted biological applications

This work proposed a one-pot green route for the development of a biocompatible Tara gum-Riceberry phenolics‑silver nanosphere hybrid nanocomposite (TG/RiPE-SNG) with manifold biological potentialities. The reaction system comprised of AgNO₃ as nanosilver precursor, Riceberry phenolic extract as the green in situ reductant, and Tara gum as stabilizing and anchoring agent. TG/RiPE-SNG was extensively characterized using UV-vis spectroscopy, FTIR, RAMAN, TEM, FESEM, EDX, DLS/zeta potential, XRD, and TGA analyses. Small, stable, spherical, well-dispersed SNP with an average particle size of 13.01 nm and λ_max of 421 nm were synthesized in situ, and uniformly distributed within the gel-like TG/RiPE composite. The prepared nanocomposite demonstrated superior antibacterial properties (MIC of 12.5 μg/mL) against S. aureus and S. epidermidis compared to the gum or extract. Additionally, TG/RiPE-SNG exhibited strong light barrier, tyrosinase inhibitory and antioxidant functionalities. TG/RiPE-SNG also exhibited high stability at different pH and was more thermally stable relative to the plain TG/RiPE composite. Furthermore, TG/RiPE-SNG showed good biocompatibility towards mouse L929 fibroblasts and rat erythrocytes. The obtained findings revealed a simple, benign, and inexpensive approach using only natural ingredients for the preparation of gum-based biopolymer-nanosilver hybrid nanocomposite and underscored the strong attributes of TG/RiPE-SNP as a nanomaterial with desirable biomedical potentials.

Construction of chitosan/Ag nanocomposite sponges and their properties

Chitosan/Ag nanocomposite sponges were prepared by soaking the chitosan hydrogels in AgNO₃ aqueous solution, which was heated at 80 °C to synthesize Ag nanoparticles (AgNPs) in the porous chitosan matrix and freeze-dried. The structure and properties of the nanocomposite sponges were characterized by FT-IR, X-ray diffraction (XRD), scanning electron microscopy (SEM), and compressive testing. In our findings, the pores of the chitosan hydrogel were used as a microreactor to synthesize AgNPs, which could distribute evenly on the chitosan matrix. The chitosan/Ag nanocomposite sponges exhibited good mechanical properties, suitable water vapor transmission and noncytotoxicity. Antibacterial test revealed their excellent antibacterial activity against Staphylococcus aureus and E. coli. The chitosan/Ag nanocomposite sponges would have great potential as wound dressings due to their good properties and facile industrialization.

Antibacterial and corrosion protection properties of SA-CuZnO@ODA-GO composite in circulating cooling water

The suitable temperature of circulating cooling water is conducive to the reproduction of bacteria, which will cause corrosion to the pipe and form slime on its surface. Therefore, the sterilization of circulating cooling water is an essential step. In this work, a new type of SA-CuZnO@ODA-GO composite antibacterial material with hydrophobic properties was prepared by ultrasonic treatment method. The composite was characterized and analyzed by SEM, TEM, XPS, XRD, and FT-IR. Then, the CuZnO@ODA-GO@PU hydrophobic and antibacterial coating was prepared. The antibacterial properties and mechanism of the composite were investigated by gram-positive bacteria S. aureus and gram-negative bacteria E. coli. The result shows that the best antibacterial rate of SA-CuZnO@ODA-GO composite antibacterial material is up to 99.10%. As for the SA-CuZnO@ODA-GO@PU composite antibacterial coating, the corrosion resistance of the antibacterial coating is up to 99.99%. The anticorrosion property is due to the hydrophobic modification of the composite, which can insulate the steel sheet from water. Secondly, due to the rigidity of the SA-CuZnO@ODA-GO, it combines with epoxy resin to form a compact structure.

Strength, Carbonation Resistance, and Chloride-Ion Penetrability of Cement Mortars Containing Catechol-Functionalized Chitosan Polymer

There have been numerous recent studies on improving the mechanical properties and durability of cement composites by mixing them with functional polymers. However, research into applying modified biopolymer such as catechol-functionalized chitosan to cement mortar or concrete is rare to the best of our knowledge. In this study, catechol-functionalized chitosan (Cat-Chit), a well-known bioinspired polymer that imitates the basic structures and functions of living organisms and biological materials in nature, was synthesized and combined with cement mortar in various proportions. The compressive strength, tensile strength, drying shrinkage, accelerated carbonation depth, and chloride-ion penetrability of these mixes were then evaluated. In the ultraviolet-visible spectra, a maximum absorption peak appeared at 280 nm, corresponding to catechol conjugation. The sample containing 7.5% Cat-Chit polymer in water (CPW) exhibited the highest compressive strength, and its 28-day compressive strength was ~20.2% higher than that of a control sample with no added polymer. The tensile strength of the samples containing 5% or more CPW was ~2.3-11.5% higher than that of the control sample. Additionally, all the Cat-Chit polymer mixtures exhibited lower carbonation depths than compared to the control sample. The total charge passing through the samples decreased as the amount of CPW increased. Thus, incorporating this polymer effectively improved the mechanical properties, carbonation resistance, and chloride-ion penetration resistance of cement mortar.

Physicochemical aspects of design of ultrathin films based on chitosan, pectin, and their silver nanocomposites with antiadhesive and bactericidal potential

Implant-related infection is one of the serious problems in regenerative medicine. Promising approach to overcome the problems caused by bacterial growth on the medical implants is their modification by bioactive coatings. A versatile technique for designing multilayer films with tailored characteristics at the nanometer scale is layer-by-layer assembly. In this study, multilayer films based on biopolymers (pectin and chitosan) and their nanocomposites with silver nanoparticles have been prepared and evaluated. The buildup of multilayers was monitored using the quartz crystal microbalance with dissipation technique. The morphology of the obtained films was investigated by atomic force microscopy. We have demonstrated that pectin-Ag-containing films were characterized by the linear growth and smooth defect-free surface. When pectin-Ag was substituted for the pectin in the multilayer systems, the properties of the formed coatings were significantly changed: the film rigidity and surface roughness increased, as well as the film growth acquired the parabolic character. All prepared multilayer films have shown antibacterial activity against gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria. The significant decrease in the number of the adhered E. coli on the multilayer surface has been determined; moreover, many of the cells were misshapen with cytoplasm leaking. The prepared multilayer films showed a mild activity against S. aureus predominantly due to the antiadhesive effect. Our results indicate that antibacterial activity of biopolymer multilayers is determined by the film composition and physicochemical characteristics and can be associated with their antiadhesive and bactericidal behaviors.

Novel light-driven functional AgNPs induce cancer death at extra low concentrations

The current study is aimed at preparing light-driven novel functional AgNPs- bio-hydrogel and evaluating anticancer potency against human melanoma cells. With an average size of 16-18 nm, the hydrogel nano-silver particle composite (AgNPs@C_MA_O) was synthesized using a soft white LED approach and analyzed by UV-Vis, DLS, FTIR, X-ray, SEM-EDX and TEM techniques. The anticancer activity of the obtained novel functionalized AgNPs@C_MA_O was tested in-vitro in the A375 melanoma cell line. Dose-response analysis showed that AgNPs at 0.01 mg/mL and 0.005 mg/mL doses reduced the viability of A375 cells by 50% at 24 and 48-h time-points, respectively. A375 cells treated with AgNPs@C_MA_O for 24 h at IC50 displayed abnormal morphology such as detachment edges and feet, shrinkage, membrane damage, and the loss of contact with adjacent cells. Our work is the first study showing that non-ionizing radiation mediated biofunctionalized AgNPs have an anti-tumoral effect at such a low concentration of 0.01 mg/mL. Our approach of using harmless wLED increased synergy between soft biopolymer compounds and AgNPs, and enhanced anticancer efficiency of the AgNPs@C_MA_O biohydrogel. Ultimately, the AgNPs accessed through the use of the wLED approach in colloidal syntheses can open new applications and combinatorial advanced cancer treatments and diagnostics.

Mussel Adhesive Mimetic Silk Sericin Prepared by Enzymatic Oxidation for the Construction of Antibacterial Coatings

With the rapid development and advancement in orthodontic and orthopedic technologies, the demand for biomedical-grade titanium (Ti) alloys is growing. The Ti-based implants are susceptible to bacterial infections, leading to poor healing and osteointegration, resulting in implant failure or repeated surgical intervention. Silk sericin (SS) is hydrophilic, biocompatible, and biodegradable and could induce a low immunological response in vivo. As a result, it would be intriguing to investigate the use of hydrophilic SS in surface modification. In this work, the tyrosine moiety in SS was oxidized by tyrosinase (or polyphenol oxidase) to the 3,4-dihydroxyphenylalanine (DOPA) form, generating the catechol moiety-containing SS (SSC). Inspired by the adhesion of mussel foot proteins, the SSC coatings could be directly deposited onto multiple surfaces in SS and tyrosinase mixed stock solutions to create active surfaces with catechol groups. Further, the SSC-coated Ti surfaces were hybridized with silver nanoparticles (Ag NPs) via in situ silver ion (Ag⁺) reduction. The antibacterial properties of the Ag NPs/SS-coated Ti surfaces are demonstrated, and they can prevent bacterial cell adhesion as well as early-stage biofilm formation. In addition, the developed Ag NPs/SSC-coated Ti surfaces exhibited a negligible level of cytotoxicity in L929 mouse fibroblast cells.

A platform for functionalization of cellulose, chitin/chitosan, alginate with polydopamine: A review on fundamentals and technical applications

Nature provides concepts and materials with interesting functionalities to be implemented in innovative and sustainable materials. In this review, it is illustrated how the combination of biological macromolecules, i.e. polydopamine and polysaccharides (cellulose, chitin/chitosan, alginate), enables to create functional materials with controlled properties. The mussel-adhesive properties rely on the secretion of proteins having 3,4-dihydroxyphenylalanine amino acid with catechol groups. Fundamental understanding on the biological functionality and interaction mechanisms of dopamine in the mussel foot plaque is presented in parallel with the development of synthetic analogues through extraction or chemical polymer synthesis. Subsequently, modification of cellulose, chitin/chitosan or alginate and their nanoscale structures with polydopamine is discussed for various technical applications, including bio- and nanocomposites, films, filtration or medical membranes, adhesives, aerogels, or hydrogels. The presence of polydopamine stretches far beyond surface adhesive properties, as it can be used as an intermediate to provide additional performance of hydrophobicity, self-healing, antimicrobial, photocatalytic, sensoric, adsorption, biocompatibility, conductivity, coloring or mechanical properties. The dopamine-based 'green' chemistry can be extended towards generalized catechol chemistry for modification of polysaccharides with tannic acid, caffeic acid or laccase-mediated catechol functionalization. Therefore, the modification of polysaccharides with polydopamine or catechol analogues provides a general platform for sustainable material functionalization.

Catechol-Based Antimicrobial Polymers

Catechol is a key constituent in mussel adhesive proteins and is responsible for strong adhesive property and crosslinking formation. Plant-based polyphenols are also capable of chemical interactions similar to those of catechol and are inherently antimicrobial. This review reports a series of catechol-based antimicrobial polymers classified according to their antimicrobial mechanisms. Catechol is utilized as a surface anchoring group for adhering monomers and polymers of known antimicrobial properties onto various types of surfaces. Additionally, catechol's ability to form strong complexes with metal ions and nanoparticles was utilized to sequester these antimicrobial agents into coatings and polymer matrices. During catechol oxidation, reactive oxygen species (ROS) is generated as a byproduct, and the use of the generated ROS for antimicrobial applications was also introduced. Finally, polymers that utilized the innate antimicrobial property of halogenated catechols and polyphenols were reviewed.

Mucoadhesive chitosan and thiolated chitosan nanoparticles containing alpha mangostin for possible Colon-targeted delivery

α-Mangostin-loaded mucoadhesive nanoparticles (NPs) were prepared for colon-targeted drug delivery against colorectal cancer cells using pH-dependent composite mucoadhesive NPs. Chitosan (CS) and thiolated chitosan (TCS) were used to form the NPs, following by genipin (GP) crosslinking and the surface modification by Eudragit^® L100 (L100). The particle size, morphologies and characteristics of NPs were observed. The α-mangostin loading and release patterns were investigated. In vitro mucoadhesive properties were examined by the wash-off method. In addition, the anti-tumour activity was tested on colorectal cancer cells. The results showed that NPs were slightly oblong in shape with particle size ranging between 300 and 900 nm. The small size of NPs was found with TCS and larger NPs were observed by GP and L100 process. However, GP and L100 provided an increase in α-mangostin loading, limited the release of α-mangostin in the upper gastrointestinal tract, and enhanced α-mangostin delivery to the colon. The TCS-based NPs with GP and L100 exhibited strong mucoadhesion to colon mucosa, more than uncoated-NPs and CS-based NPs. Moreover, NPs exhibited the anti-tumour activity. Therefore, the mucoadhesive TCS-based NPs could be a promising candidate for a controlled-release drug delivery system of α-mangostin to the colon.

An Updated Review on Silver Nanoparticles in Biomedicine

Silver nanoparticles (AgNPs) represent one of the most explored categories of nanomaterials for new and improved biomaterials and biotechnologies, with impressive use in the pharmaceutical and cosmetic industry, anti-infective therapy and wound care, food and the textile industry. Their extensive and versatile applicability relies on the genuine and easy-tunable properties of nanosilver, including remarkable physicochemical behavior, exceptional antimicrobial efficiency, anti-inflammatory action and antitumor activity. Besides commercially available and clinically safe AgNPs-based products, a substantial number of recent studies assessed the applicability of nanosilver as therapeutic agents in augmented and alternative strategies for cancer therapy, sensing and diagnosis platforms, restorative and regenerative biomaterials. Given the beneficial interactions of AgNPs with living structures and their nontoxic effects on healthy human cells, they represent an accurate candidate for various biomedical products. In the present review, the most important and recent applications of AgNPs in biomedical products and biomedicine are considered.

Fabrication, Physical Characterizations, and In Vitro, In Vivo Evaluation of Ginger Extract-Loaded Gelatin/Poly(Vinyl Alcohol) Hydrogel Films Against Burn Wound Healing in Animal Model

Crude ginger has been used to treat wounds since ancient times till nowadays. The present study aimed at designing and characterizing topical hydrogel films loaded with ginger extract for wound healing in animal model. The hydrogel films were prepared using PVA and gelatin. The prepared films were evaluated for FTIR analysis, surface morphology, pH, swelling behavior, in vitro release, and % drug content. The wound-healing activity of the extract-loaded hydrogel films was compared with commercially available Silver Sulfadiazine® cream. The drug was compatible with the selected polymers and indicated the suitability of the selected polymers for preparation of topical hydrogel films. The SEM images clearly indicated porous structure of the prepared hydrogel films. Slight changes were observed in pH, ranging from 4.98 ± 0.079 in the beginning of the study to 4.9 ± 0.58 in the end. The swelling percentage after 8 h was 257.7%. The films released 78.7 ± 1.7% of the drug in 250 min. The percent drug content was 97.78 ± 5% which did not change significantly during the storage period. The hydrogel films showed similar wound-healing activity as compared to the commercial product (p > 0.05; ANOVA), while greater wound-healing activity as compared to the control group (p < 0.05; ANOVA) evidenced by intensive collagen formation in histopathological analysis.

Sunlight-Induced Synthesis of Non-Target Biosafety Silver Nanoparticles for the Control of Rice Bacterial Diseases

Silver is an important and efficient bactericide. Nanoscale silver has a large specific surface area, high target adhesion, strong permeability and high bactericidal activity. At present, the control of plant bacterial diseases is difficult, and the resistance of plant bacterial pathogens develops rapidly. Silver nanoparticles are expected to become a new generation of agrochemical to control plant bacterial diseases. In this study, a simple and green natural sunlight-induced method was used to prepare carboxymethylcellulose sodium-stabilized silver nanoparticles (CMC-SNs) with a particle size of around 13.53 ± 4.72 nm. CMC-SNs were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), energy-dispersive spectrometry (EDS), X-ray diffraction (XRD) and UV-vis spectroscopy and found to be spherical and evenly dispersed. The bacteriostatic activity of the CMC-SNs toward Xanthomonas oryzae pv. oryzae (Xoo) was tested. The minimum inhibitory concentration (MIC) of CMC-SNs to Xoo was 1 mg/L, and the minimum bactericidal concentration (MBC) was 2 mg/L. In addition, the antibacterial mechanism was studied by scanning electron microscope (SEM) and confocal laser scanning microscope (CLSM), which confirmed that the CMC-SNs had high antibacterial activity. In order to verify its impact on the environment, we conducted an acute toxicity test on zebrafish and found that Half lethal concentration (LC50) > 100 mg/L in zebrafish, or no acute toxicity. The ability of CMC-SNs to control rice bacterial blight was verified by a pot experiment.

AgNP/Alginate Nanocomposite hydrogel for antimicrobial and antibiofilm applications

The synthesis and specific surface functionalization of antimicrobial silver nanoparticles (AgNPs) and their incorporation into an alginate hydrogel is described. Divalent cation-mediated ionic crosslinking was used to disperse the AgNPs throughout the gel, made possible by -COO^- cross-linking sites provided by the surface-enhanced nanoparticles, inspired by the classic egg-box model crosslinking of calcium alginate. An AgNP concentration, 10-20 μg g^-1 increased hygrogel elasticity, viscosity, and shear resistance by 45, 30, and 31% respectively. Cryo-TEM revealed evenly distributed AgNP assemblies of discrete AgNPs throughout the gel matrices. FTIR-ATR indicated AgNPs were involved in alginate carboxylate-Ca²⁺-COO^-AgNP crossbridging, which was not achieved through mixing of AgNPs into preformed gels. Live/dead fluorometric assays determined a minimal bactericidal concentration of 25 μg g^-1 Ag for 6 microorganisms. Anti-biofilm assays showed species-dependent cell death of 44 -61%, with limited silver ion release of 0.41% and 1.1% after 7 days for Gram positive and negative bacteria, respectively.

Synthesis of biosurfactant stabilized silver nanoparticles, characterization and their potential application for bactericidal purposes

Uniformly dispersed silver nanoparticles (AgNPs) with remarkable colloidal stability were synthesised using chemical reduction method in lipopeptide biosurfactant reverse micelles. Transmission Electron microscopy (TEM), Scanning electron microscopy (SEM) and UV-vis spectroscopy analysis exhibited monodisperse nanoparticles with spherical morphology of diameter of 21 ± 2. The lipopeptide stabilized AgNPs displayed remarkable antibacterial activity with minimum inhibitory concentration (MIC) value of 15.625 μg/mL against Gram-negative Pseudomonas aeruginosa CB1 and Gram-positive Bacillus subtilis CN2 strains with a significant dose-dependent reduction of cell viability and loss of membrane integrity. Investigation of AgNPs internalization and dissolution assays demonstrated 42-fold higher leaching of the lipopeptide-stabilized AgNPs compared to the bare AgNPs, and concentration dependent increase in cellular uptake with subsequent damage to intracellular organelles. Further ultrastructural observation using TEM revealed internalization and strong binding of considerable amount of AgNPs on the lipopolysaccharide layer of the Gram-negative and peptidoglycans layer of Gram-positive bacteria indiscriminately, demonstrating robust antibacterial activity and potential application to treat multidrug resistant bacteria.

Mechanically Robust, Self-Healing, Polymer Blends and Polymer/Small Molecule Blend Materials with High Antibacterial Activity

There is a growing demand for antibacterial materials around the world in recent years because they can be used for preventing pathogen infection, which is one of the major threats to human health. However, the mechanical damage of the antibacterial materials may weaken their protective effect since bacteria can invade through the cracks of the material. Therefore, antibacterial materials with self-healing ability, in which the mechanical damage can be spontaneously healed, exhibit better reliability and a longer lifespan. In this article, we prepared a series of low-cost antibacterial polymer blends and polymer/small molecule blend materials with excellent self-healing ability and high mechanical strength by a one-pot reaction under mild conditions. These materials were facilely obtained by blending a tiny amount of commercialized cationic antibacterial chemicals, poly(ethylene imine) (PEI) or cetyltrimethylammonium bromide (CTAB), into a self-healing, mechanically robust polymer, poly(ether-thioureas) (PETU). It can be found that they can effectively kill Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) on their surface. Meanwhile, the distinguished advantages of PETU, including self-healing property, excellent mechanical robustness, recyclability, and transparency, were perfectively maintained. Furthermore, it was shown that their cytotoxicity was satisfactory and their hemolytic activity was insignificant. The above advantages of the blend materials suggested their potential applications in health care, food industry, and environmental hygiene.

Bacterial Surface Colonization of Sputter-Coated Platinum Films

Due to its biocompatibility and advantageous electrochemical properties, platinum is commonly used in the design of biomedical devices, e.g., surgical instruments, as well as electro-medical or orthopedic implants. This article verifies the hypothesis that a thin layer of sputter-coated platinum may possess antibacterial effects. The purpose of this research was to investigate the adhesion and growth ability of a model strain of Gram-negative bacteria, Escherichia coli, on a surface of a platinum-coated glass slide. Although some previous literature reports suggests that a thin layer of platinum would inhibit the formation of bacterial biofilm, the results of this study suggest otherwise. The decrease in the number of bacterial cells attached to the platinum-coated glass, which was observed within first three hours of culturing, was found to be a short-time effect, vanishing after 24 h. Consequently, it was shown that a thin layer of sputter-coated platinum did not exhibit any antibacterial effect. For this reason, this study indicates an urgent need for the development of new methods of surface modification that could reduce bacterial surface colonization of platinum-based biomedical devices.

Antibacterial Polylactic-co-glycolic Acid Braided Threads Using Plasma and Coating Modifications for Acupoint Catgut Embedding Therapy Applications

Polylactic-co-glycolic acid (PLGA) thread is frequently used for acupoint catgut embedding therapy (ACET), but the poor hydrophilicity and biocompatibility largely limited its wider applications. The aim of this study is to functionalize the PLGA braided thread and improve its cell adhesion property. The PLGA strands are first processed into threads on a circular braiding machine, and then, antibacterial treatment was introduced with and without oxygen plasma treatments. Afterward, functional characterizations such as antibacterial activity (Staphylococcus aureus and Escherichia coli), cytotoxicity, cell attachment and cell morphology, histological observation, and biodegradation experiments of threads were measured. Moreover, tensile properties and flexibility of the threads were determined to evaluate their mechanical properties. The modified threads showed rougher surfaces than those of the unmodified ones from SEM observations, and the weights and fiber diameters of the threads increased correspondingly, together with the improved surface hydrophilicity. All coated sutures showed durable antimicrobial function and slow drug releasing features for more than 5 days and good cell viability (more than 75%), according to the standard of ISO 10993-5:2009. Besides, cell attachment, tissue growth, and collagen regeneration of plasma-treated samples were greatly improved compared to those of without the plasma treatment. The threads presented slow degradation behavior after the antibacterial treatment. The threads with only plasma-treated revealed a promising prospect for clinical applications.

A self-healable and antifouling hydrogel based on PDMS centered ABA tri-block copolymer polymersomes: a potential material for therapeutic contact lenses

We have prepared an antifouling and self-healable PDMS based hydrogel which consists of a mixture of curcumin loaded zwitterionic PDMS polymersomes and amine functionalized PDMS polymersomes prepared via RAFT polymerization and Schiff-base reaction.

Catechol-Functionalized Chitosan: Optimized Preparation Method and Its Interaction with Mucin

Chitosan is one of the most popular biopolymers used for biomedical applications with its unique properties of blood clotting and adhesion to tissues. Catechol-functionalized chitosan (CatChit) has shown a significant improvement of those properties of chitosan as biomaterials. However, some well-cited methods of CatChit preparation in existing literature, repeatedly followed by numerous research groups in the past decades, have not stressed the importance of the vulnerability of catechol to oxidation, which resulted in many priceless in vivo studies that used wrong materials, i.e., partially oxidized forms of CatChit. Since some key synthesis parameters were erroneous in those previous reports, it is a challenge to reproduce the published results. To avoid the loss of critical details with these repeated citations, it is essential that we re-establish the critical parameters in these methods. In this study, we examined the accuracy of existing protocols, and optimized one of the protocols to synthesize CatChit. We have confirmed that a notable degree of catechol oxidation is inevitable with the inaccurate synthetic protocols and the maintenance of pH < 5 throughout the preparation of CatChit is essential. We have also re-evaluated interaction between CatChit and mucin, which is widely present in the gastrointestinal (GI) tract, at different pH values using CatChit prepared via our optimized synthetic protocol. Turbidimetric titrations suggested that regardless of the reaction pH, the association between CatChit and mucin increased with increasing concentration of polymer with respect to mucin. The decrease in the average size of the aggregated particles observed by Dynamic Light Scattering (DLS) studies was attributed to the formation of a large number of aggregations with increasing polymer to mucin ratio. ζ potential (ZP) measurements suggested that at acidic reaction pH, the average particle size was dictated by electrostatic interactions, while at a physiological pH, consolidation of covalent and charge-based interactions contributed to the overall surface charge.

Antibacterial/Antifungal Activity of Extracted Chitosan From American Cockroach (Dictyoptera: Blattidae) and German Cockroach (Blattodea: Blattellidae)

We investigated bactericidal and fungicidal properties of chitosan extracted from adults and nymphs from both German cockroach, Blattella germanica (Blattodea: Blattellidae) and American cockroach, Periplaneta americana (Dictyoptera: Blattidae). The cuticle of adults and nymphs extracted from both cockroaches were dried and ground. The powders were demineralized and deproteinized followed by deacetylation using NaOH. Finally, the chitosan yields were examined for antibacterial and antifungal activities. The degree of deacetylation (DD) was different between adults and nymph stages. The antimicrobial effect of American cockroach chitosan (ACC) and German cockroach chitosan (GCC) was tested against four bacteria and four fungi. The extracted chitosans from American cockroach, Periplaneta americana and German Cockroach, Blattella germanica suppressed the growth of Gram-negative/positive bacteria except Micrococcus luteus. The growth of Aspergillus flavus and Aspergillus niger were notability inhibited by the extracted chitosans. The antimicrobial effect of the chitosan depended on the cockroach species, with chitosan of the American cockroach showing more inhibitory effect. This difference may be due to differences in the structure of chitin between the two cockroach species.

Toxicity-Attenuated Glycol Chitosan Adhesive Inspired by Mussel Adhesion Mechanisms

Chitosan-catechol, inspired from mussel-adhesive-proteins, is characterized by the formation of an adhesive membrane complex through instant bonding with serum proteins not found in chitosan. Using this intrinsic property, chitosan-catechol is widely applied for hemostatic needles, general hemostatic materials, nanoparticle composites, and 3D printing. Despite its versatility, the practical use of chitosan-catechol in the clinic is limited due to its undesired immune responses. Herein, a catechol-conjugated glycol chitosan is proposed as an alternative hemostatic hydrogel with negligible immune responses enabling the replacement of chitosan-catechol. Comparative cellular toxicity and in vivo skin irritation between chitosan-catechol and glycol chitosan-catechol are evaluated. Their immune responses are also assessed using histological analysis after subcutaneous implantation into mice. The results show that glycol chitosan-catechol significantly attenuates the immune response compared with chitosan-catechol; this finding is likely due to the antibiofouling effect of ethylene glycol groups and the reduced adhesion of immune cells. Finally, the tissue adhesion and hemostatic ability of glycol chitosan-catechol hydrogels reveal that these ethylene glycol groups do not dramatically modify the adhesiveness and hemostatic ability compared with nonglycol chitosan-catechol. This study suggests that glycol chitosan-catechol can be a promising alternative to chitosan-catechol in various biomedical fields such as hemostatic agents.

A Novel Coloration of Polyester Fabric through Green Silver Nanoparticles (G-AgNPs@PET)

This paper reports a novel route for the coloration of polyester fabric with green synthesized silver nanoparticles (G-AgNPs@PET) using chitosan as a natural eco-friendly reductant. The formation of AgNPs was confirmed by UV-visible spectroscopy. The morphologies and average particles size of G-AgNPs was investigated by transmission electron microscope (TEM) analysis. The uniform deposition of G-AgNPs on the PET fabric surface was confirmed with scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) spectroscopy. The thermal properties were investigated using a thermogravimetric analyzer (TGA). The coloration and fastness properties of fabric were found to be significantly improved, a result related to the surface plasmon resonance of G-AgNPs. The antibacterial properties of fabric were also found to be excellent as more than 80% bacterial reduction was noticed even after 10 washing cycles. Overall, the proposed coating process using green nanoparticles can contribute to low-cost production of sustainable textiles.

Bio-Based Polymers with Antimicrobial Properties towards Sustainable Development

This article concisely reviews the most recent contributions to the development of sustainable bio-based polymers with antimicrobial properties. This is because some of the main problems that humanity faces, nowadays and in the future, are climate change and bacterial multi-resistance. Therefore, scientists are trying to provide solutions to these problems. In an attempt to organize these antimicrobial sustainable materials, we have classified them into the main families; i.e., polysaccharides, proteins/polypeptides, polyesters, and polyurethanes. The review then summarizes the most recent antimicrobial aspects of these sustainable materials with antimicrobial performance considering their main potential applications in the biomedical field and in the food industry. Furthermore, their use in other fields, such as water purification and coating technology, is also described. Finally, some concluding remarks will point out the promise of this theme.

The antibacterial effect of non-thermal atmospheric pressure plasma treatment of titanium surfaces according to the bacterial wall structure

Titanium is commonly used as a biomaterial for dental implants. In this study, we investigated the antibacterial properties of titanium samples following treatment with a non-thermal atmospheric pressure plasma jet (NTAPPJ) on bacteria with two different cell wall structures, including gram-positive and gram-negative bacteria. The hydrophilicity and surface energy of titanium surfaces were significantly increased after NTAPPJ treatment without altering topographical features. Changes in the chemical composition and reductive potential were observed on the NTAPPJ-treated titanium surfaces. The adhesion and biofilm formation rate of bacteria were significantly reduced on the NTAPPJ-treated titanium surfaces compared with the untreated samples, which was confirmed by fluorescent imaging. Regarding the comparison between gram-positive and gram-negative bacteria, both adhesion and the biofilm formation rate were significantly lower for gram-negative bacteria than gram-positive bacteria on samples treated for longer durations with the NTAPPJ. Transmission electron microscopy imaging showed a comparably more disruptive membrane structure of gram-negative bacteria than gram-positive bacteria on the NTAPPJ-treated surfaces. Our results indicated that the NTAPPJ treatment could be useful for preventing bacterial adhesion and biofilm formation on titanium dental implant surfaces, while the reductive potential on surfaces treated by the NTAPPJ could cause oxidation of bacteria, which could be more sensitive to gram-negative bacteria due to differences in the cell wall structure.