Facile Fabrication of Nanofibrillated Chitin/Ag2O Heterostructured Aerogels with High Iodine Capture Efficiency

Sustainable versatile chitin aerogels: facile synthesis, structural control and high-efficiency acoustic absorption

Bio-based materials with excellent acoustic absorption properties are in great demand in architecture, interior, and human settlement applications for efficient noise control. In this study, crayfish shells, a form of kitchen waste, are utilized as the primary material to produce ultralight and multifunctional chitin aerogels, which effectively eliminate noise. Different replacement solvents and freezing rates were employed to regulate the porous structures of chitin aerogels, and their resulting acoustic absorption performance was investigated. Results demonstrate that employing deionized water as the replacement solvent and utilizing a common-freeze mode (frozen via refrigerator at -26 °C) can produce chitin aerogels with larger porosity (96.26%) and apertures, as well as thicker pore walls. This results in superior broadband acoustic absorption performance (with a maximum absorption coefficient reaching 0.99) and higher Young's modulus (28 kPa). Conversely, chitin aerogels solvent-exchanged with tert-butyl alcohol or subjected to quick-freeze mode (frozen via liquid nitrogen) exhibit smaller porosity (92.32% and 94.84%) and apertures, thereby possessing stronger diffuse reflection of visible light (average reflectance of 94.30% and 88.18%), and enhanced low-frequency (500 to 1600 Hz) acoustic absorption properties. Additionally, the acoustic absorption mechanism of fabricated chitin aerogels was predicted using a simple three-parameter analysis Johnson-Champoux-Allard-Lafarge (JCAL) model. This study presents a novel approach to developing multifunctional biomass materials with excellent acoustic absorption properties, which could have a wide range of potential applications.

Reusable and Biodegradable Separation Membranes Prepared from Common Mushrooms for the Removal of Oily and Particulate Contaminants from Water

Mushroom chitin membranes with controllable pore structures were fabricated through a simple process with naturally abundant Agaricus bisporus mushrooms. A freeze-thaw method was applied to alter the pore structures of the membranes, which consist of chitin fibril clusters within the glucan matrix. With tunable pore size and distribution, mushroom chitin membranes could effectively separate stable oil/water emulsions (dodecane, toluene, isooctane, and chili oil) with various chemical properties and concentrations and particle contaminants (carbon black and microfibers) from water. Chitin fibrils tightly pack with each other to form a dense membrane, leading to no permeation of contaminants or water. An increasing number of applied freeze-thaw cycles confers more tortuous pore structures throughout the mushroom chitin membranes, leading to higher flux while maintaining rejection performance. The 3D simulation constructed by the X-ray computed tomography and GeoDict software also demonstrated capturing a considerable amount of contaminants within the membranes' pores, which can be easily removed by water rinsing for further successive filtration. Furthermore, mushroom chitin membranes were almost completely biodegraded after approximately a month of being buried in the soil or kept in a lysozyme solution while possessing mechanical durability demonstrated by consistent filtration performance for repeated usage up to 15 cycles under ambient and external pressure. This research is a proof of concept that mushroom-derived chitin develops functional and biodegradable materials for environmental applications with scalability.

Facile Preparation of MCM-41/Ag2O Nanomaterials with High Iodide-Removal Efficiency

The elimination of iodide (I^-) from water is a tough subject due to its low adsorption tendency and high mobility. In this work, MCM-41/Ag₂O nanomaterials were prepared, characterized, and employed to adsorb I^- from water. The Ag₂O nanoparticles were dispersed homogeneously in the pores or at the surface of the MCM-41 support, and the Ag₂O nanoparticles in the pores had small particles sizes due to the confinement of the mesoporous channel. The prepared MCM-41/Ag₂O nanomaterials exhibited a higher specific surface area than previously reported Ag₂O-based composites. The adsorption of I^- by the nanomaterials was able to reach equilibrium at 180 min. The MCM-41/Ag₂O nanomaterials showed a better adsorption capacity per unit mass of Ag₂O than pure Ag₂O nanoparticles and previously reported Ag₂O-based composites prepared using other supports. Furthermore, the MCM-41/Ag₂O nanomaterials exhibited high selectivity for I^- in the presence of high concentrations of competitive anions, such as Cl^- or Br^-, and could function in a wide range of pH. The chemical reaction between Ag₂O and I^- and the surface adsorption were the main adsorption mechanisms. These results indicate that MCM-41/Ag₂O nanomaterials are a promising and efficient adsorbent material suitable for the removal of I^- for practical application.

Selective removal of radioactive iodine from water using reusable Fe@Pt adsorbents

Environmental damage from serious nuclear accidents should be urgently restored, which needs the removal of radioactive species. Radioactive iodine isotopes are particularly problematic for human health because they are released in large amounts and retain radioactivity for a substantial time. Herein, we prepare platinum-coated iron nanoparticles (Fe@Pt) as a highly selective and reusable adsorbent for iodine species, i.e., iodide (I^-), iodine (I₂), and methyl iodide (CH₃I). Fe@Pt selectively separates iodine species from seawater and groundwater with a removal efficiency ≥ 99.8%. The maximum adsorption capacity for the iodine atom of all three iodine species was determined to be 25 mg/g. The magnetic properties of Fe@Pt allow for the facile recovery and reuse of Fe@Pt, which remains stable with high efficiency (97.5%) over 100 uses without structural and functional degradation in liquid media. Practical application to the removal of radioactive ¹²⁹I and feasibility for scale-up using a 20 L system demonstrate that Fe@Pt can function as a reusable adsorbent for the selective removal of iodine species. This systematic procedure is a standard protocol for designing highly active adsorbents for the clean separation and removal of various chemical species dissolved in wastewater.

Advances in Manufacturing Composite Carbon Nanofiber-Based Aerogels

This article provides an overview on manufacturing composite carbon nanofiber-based aerogels through freeze casting technology. As known, freeze casting is a relatively new manufacturing technique for generating highly porous structures. During the process, deep cooling is used first to rapidly solidify a well-dispersed slurry. Then, vacuum drying is conducted to sublimate the solvent. This allows the creation of highly porous materials. Although the freeze casting technique was initially developed for porous ceramics processing, it has found various applications, especially for making aerogels. Aerogels are highly porous materials with extremely high volume of free spaces, which contributes to the characteristics of high porosity, ultralight, large specific surface area, huge interface area, and in addition, super low thermal conductivity. Recently, carbon nanofiber aerogels have been studied to achieve exceptional properties of high stiffness, flame-retardant and thermal-insulating. The freeze casting technology has been reported for preparing carbon nanofiber composite aerogels for energy storage, energy conversion, water purification, catalysis, fire prevention etc. This review deals with freeze casting carbon nanofiber composite materials consisting of functional nanoparticles with exceptional properties. The content of this review article is organized as follows. The first part will introduce the general freeze casting manufacturing technology of aerogels with the emphasis on how to use the technology to make nanoparticle-containing composite carbon nanofiber aerogels. Then, modeling and characterization of the freeze cast particle-containing carbon nanofibers will be presented with an emphasis on modeling the thermal conductivity and electrical conductivity of the carbon nanofiber network aerogels. After that, the applications of the carbon nanofiber aerogels will be described. Examples of energy converters, supercapacitors, secondary battery electrodes, dye absorbents, sensors, and catalysts made from composite carbon nanofiber aerogels will be shown. Finally, the perspectives to future work will be presented.

Iodine immobilization by materials through sorption and redox-driven processes: A literature review

Radioiodine-129 (¹²⁹I) in the subsurface is mobile and limited information is available on treatment technologies. Scientific literature was reviewed to compile information on materials that could potentially be used to immobilize ¹²⁹I through sorption and redox-driven processes, with an emphasis on ex-situ processes. Candidate materials to immobilize ¹²⁹I include iron minerals, sulfur-based materials, silver-based materials, bismuth-based materials, ion exchange resins, activated carbon, modified clays, and tailored materials (metal organic frameworks (MOFS), layered double hydroxides (LDHs) and aerogels). Where available, compiled information includes material performance in terms of (i) capacity for ¹²⁹I uptake; (ii) long-term performance (i.e., solubility of a precipitated phase); (iii) technology maturity; (iv) cost; (v) available quantity; (vi) environmental impact; (vii) ability to emplace the technology for in situ use at the field-scale; and (viii) ex situ treatment (for media extracted from the subsurface or secondary waste streams). Because it can be difficult to compare materials due to differences in experimental conditions applied in the literature, materials will be selected for subsequent standardized batch loading tests.

Pyrrolidone-based polymers capable of reversible iodine capture for reuse in antibacterial applications

Numerous emerging and re-emerging advanced materials have been successful in capturing iodine pollutants that pose an unprecedented global challenge to public health. However, little attention has been paid to the reutilization of the captured iodine. Herein, we report on a pyrrolidone-based polymer capable of reversible iodine capture for reutilization in antibacterial applications. The pyrrolidone-based polymer poly(N-vinyl-2-pyrrolidone-co-vinyl acetate), denoted as P(VAc-NVP), was synthesized facilely via a one-step radical copolymerization strategy, and the synthesis was regulated by step-by-step optimization, specifically by tuning the feed ratio of NVP to VAc. The as-synthesized P(VAc-NVP) copolymer functioned as an adsorbent for iodine in various solutions, including water/ethanol, cyclohexane, and petroleum ether, in addition to having the special capability of releasing iodine in the presence of starch or bacteria. This opens up a new horizon for its functional practical use as a flexible adsorbent to capture iodine for safe disposal. Interestingly, the P(VAc-NVP) copolymer, after adsorbing iodine, showed antibacterial ability against pathogenic bacteria, including Staphylococcus aureus and Escherichia coli, when a series of simulated and practical antibacterial assays were conducted. It is believed that this proposed strategy based on the synergism of iodine capture and antibacterial use should have great potential for environmental remediation and public healthcare.

Silver-functionalized silica aerogels and their application in the removal of iodine from aqueous environments

One of the key challenges for radioactive waste management is the efficient capture and immobilization of radioiodine, because of its radiotoxicity, high mobility in the environment, and long half-life (t_1/2 = 1.57 × 10⁷ years). Silver-functionalized silica aerogel (AgAero) represents a strong candidate for safe sequestration of radioiodine from various nuclear waste streams and subsurface environments. Batch sorption experiments up to 10 days long were carried out in oxic and anoxic conditions in both deionized water (DIW) and various Hanford Site Waste Treatment Plant (WTP) off-gas condensate simulants containing from 5 to 10 ppm of iodide (I^-) or iodate (IO₃^-). Also tested was the selectivity of AgAero towards I^- in the presence of other halide anions. AgAero exhibited fast and complete removal of I^- from DIW, slower but complete removal of I^- from WTP off-gas simulants, preferred removal of I^- over Br^- and Cl^-, and it demonstrated ability to remove IO₃^- through reduction to I^-.

Construction of hydrophobic interface on natural biomaterials for higher efficient and reversible radioactive iodine adsorption in water

For the pollution of radioactive materials, it is of great importance to develop efficient adsorbents for radioactive iodine adsorption in aqueous solution. In this work, a simple and green strategy was developed to construct hydrophobic surface on natural cotton fibers (n-CF) based on organic-soluble carbon dots (OCDs) for the first time. The results demonstrated the successful constructed hydrophobic n-CF@OCDs expressed excellent stability and selectivity for iodine (I₂) adsorption in water. The maximum adsorption capacity for I₂ on n-CF@OCDs is calculated to be 190.1 mg g^-1, which is about 6.8 times higher than that of n-CF (28.1 mg g^-1), this highly I₂ adsorption efficiency should be attributed to the hydrophobic properties of adsorbent. The adsorption mechanism was also discussed in this work. In addition, the adsorbed I₂ could be desorbed easily with a simple reductive process at ambient conditions, which can lead to not only the restore of I₂ but also the recycling of adsorbent, illustrating their good practicability. Furthermore, this universal strategy can also be used for construction of hydrophobic surface on various natural biomaterials, demonstrating its potential application in constructing of hydrophobic surface and used for the adsorption and removal of nonpolar pollutions or radioactive waste in aqueous solutions.

Porous Starch Materials via Supercritical- and Freeze-Drying

The production of porous materials based on starch has been explored with supercritical drying—yielding aerogel—and freeze-drying. The two drying procedures were applied on the same gelling solution of amylomaize starch pasted at 140 °C and for two concentrations (5 and 10 wt.%). After gelation and retrogradation, water from the samples to be supercritically dried was exchanged to ethanol. The resulting starch aerogel presented high specific surface area (197 m²/g). Freeze-drying was assessed by investigating the effect of the gelation, retrogradation, freezing temperature, and sublimation pressure. The resulting starch materials were macroporous, with limited specific surface area and limited mechanical integrity. Cohesive open cell foam with pore size of ~20 µm was produced by quenching the hot starch melt in liquid nitrogen. The highest specific surface area obtained with freeze-drying was 7.7 m²/g for the hot starch melt frozen at −20 °C.