Fabrication of Fresnel plates on optical fibres by FIB milling for optical trapping, manipulation and detection of single cells

Level set simulation of focused ion beam sputtering of a multilayer substrate

The evolution of a multilayer sample surface during focused ion beam processing was simulated using the level set method and experimentally studied by milling a silicon dioxide layer covering a crystalline silicon substrate. The simulation took into account the redeposition of atoms simultaneously sputtered from both layers of the sample as well as the influence of backscattered ions on the milling process. Monte Carlo simulations were applied to produce tabulated data on the angular distributions of sputtered atoms and backscattered ions. Two sets of test structures including narrow trenches and rectangular boxes with different aspect ratios were experimentally prepared, and their cross sections were visualized in scanning transmission electron microscopy images. The superimposition of the calculated structure profiles onto the images showed a satisfactory agreement between simulation and experimental results. In the case of boxes that were prepared with an asymmetric cross section, the simulation can accurately predict the depth and shape of the structures, but there is some inaccuracy in reproducing the form of the left sidewall of the structure with a large amount of the redeposited material. To further validate the developed simulation approach and gain a better understanding of the sputtering process, the distribution of oxygen atoms in the redeposited layer derived from the numerical data was compared with the corresponding elemental map acquired by energy-dispersive X-ray microanalysis.

Ultra-miniature dual-wavelength spatial frequency domain imaging for micro-endoscopy

Significance

There is a need for a cost-effective, quantitative imaging tool that can be deployed endoscopically to better detect early stage gastrointestinal cancers. Spatial frequency domain imaging (SFDI) is a low-cost imaging technique that produces near-real time, quantitative maps of absorption and reduced scattering coefficients, but most implementations are bulky and suitable only for use outside the body.

Aim

We aim to develop an ultra-miniature SFDI system comprising an optical fiber array (diameter 0.125 mm) and a micro camera (1 × 1    mm package) to displace conventionally bulky components, in particular, the projector.

Approach

First, we fabricated a prototype with an outer diameter of 3 mm, although the individual component dimensions could permit future packaging to a < 1.5    mm diameter. We developed a phase-tracking algorithm to rapidly extract images with fringe projections at three equispaced phase shifts to perform SFDI demodulation.

Results

To validate the performance, we first demonstrate comparable recovery of quantitative optical properties between our ultra-miniature system and a conventional bench-top SFDI system with an agreement of 15% and 6% for absorption and reduced scattering, respectively. Next, we demonstrate imaging of absorption and reduced scattering of tissue-mimicking phantoms providing enhanced contrast between simulated tissue types (healthy and tumour), done simultaneously at wavelengths of 515 and 660 nm. Using a support vector machine classifier, we estimate that sensitivity and specificity values of > 90 % are feasible for detecting simulated squamous cell carcinoma.

Conclusions

This device shows promise as a cost-effective, quantitative imaging tool to detect variations in optical absorption and scattering as indicators of cancer.

Three-dimensional printing of a beam expander to enable the combination of hundred-micron optical elements and a single-mode fiber

We use a flexible two-photon photopolymerization direct laser writing to fabricate an integrated diffractive lens system on a fiber tip to expand the output beam of the fiber. The results show that the micro-integrated beam expander based on double lenses (axial size of about 100 μm) has a magnification of 5.9 and a loss of 0.062 dB. Subsequently, we demonstrate the fabrication of a spiral phase plate (diffractive optical elements) and micro-lens arrays (refractive optical elements) on an integrated beam expander, and their optical properties are measured and analyzed, respectively. This Letter is an exploration of the future integrated micro-optical systems on an optical fiber tip.

Ultra-compact Archimedes spiral plasmonic lens with a circular groove for low power optical trapping in the far-field region

Particle levitation is crucial in optical trapping considering contamination and alteration of the character of the particle due to physical contact with the structure. A strong field gradient along the optical axis is required in this case. To manipulate the particle at a distance from the surface, we propose an Archimedes spiral plasmonic lens with a circular groove (CG-ASPL). The optical properties and parameters influencing the trapping performance of CG-ASPL are fully analyzed and discussed. By illuminating the structure with circular polarization and structure optimization, we can reduce the required optical power down to 2.4 mW for trapping particle of 1 µm in diameter with groove width and height of 100 and 125 nm, respectively. The particle can be stably trapped with trapping potential of 4138 kBT/W in the far-field region (1.1λ) owing to constructive interference of the scattered SPP waves. Furthermore, this structure is ultra-compact with a size of about 6.7 µm in diameter. We believe the results demonstrated in this work would be very useful for lab-on-a-chip applications and many others.

Rapid fabrication of sub-micron scale functional optical microstructures on the optical fiber end faces by DMD-based lithography

The rapid development of optical fiber application systems puts forward higher requirements for the miniaturization and integration of optical fiber devices. One promising solution is to integrate diffractive optical microstructures on the end faces of optical fibers. However, rapid microfabrication on such tiny and irregular substrates is a challenge. In recent years, Femtosecond laser polymerization technology has become an effective solution to the challenge, which can be flexibly applied for the fabrication of complex 3D microstructures with ultra-high resolution. When the demand for the lithography resolution is not very high, other microfabrication methods with a lower technical threshold may be developed for achieving a balance between fabrication precision, cost and efficiency. In this paper, we report a Digital Micromirror Device (DMD) based lithography method dedicated to the fabrication of functional optical microstructures on the optical fiber end faces. Especially, it's also applicable to single-mode fibers (SMFs). By the projection via a 40x objective lens, the fabrication resolution of 0.405 μm was achieved within an exposure area of 209.92 μm × 157.44 μm. We evaluated the microfabrication results by the photomicrographs and the optical diffraction modulation effects of the functional optical microstructures. This method provides a new idea for fabricating both hybrid optical fiber devices and SMF devices, and it may be an alternative method for resolving the conflict between the precision, the cost and the efficiency.

Design of Acoustic Bifocal Lenses Using a Fourier-Based Algorithm

In this work, we develop a new design method based on fast Fourier transform (FFT) for implementing zone plates (ZPs) with bifocal focusing profiles. We show that the FFT of the governing binary sequence provides a discrete sequence of the same length, which indicates the location of the main foci at the ZP focusing profile. Then, using reverse engineering and establishing a target focusing profile, we are capable of generating a binary sequence that provides a ZP with the desired focusing profile. We show that this design method, based on the inverse fast Fourier transform (IFFT), is very flexible and powerful and allows to tailor the design of bifocal ZPs to achieve focusing profiles with the desired foci locations and resolutions. The key advantage of our design algorithm, compared to other alternatives presented in previous works, is that our method provides bifocal focusing profiles with an absolute control of the foci locations. Moreover, although we analyze the performance of this novel design algorithm for underwater ultrasonics, it can also be successfully extended to different fields of physics, such as optics or microwaves, where ZPs are widely employed.

Rapid prototyping of grating magneto-optical traps using a focused ion beam

We have developed a rapid prototyping approach for creating custom grating magneto-optical traps using a dual-beam system combining a focused ion beam and a scanning electron microscope. With this approach we have created both one- and two-dimensional gratings of up to 400 µm × 400 µm in size with structure features down to 100 nm, periods of 620 nm, adjustable aspect ratios (ridge width : depth ∼ 1 : 0.3 to 1 : 1.4) and sidewall angles up to 71°. The depth and period of these gratings make them suitable for holographic trapping and cooling of neutral ytterbium on the ¹S₀ → ¹P₁ 399 nm transition. Optical testing of the gratings at this wavelength has demonstrated a total first order diffraction of 90% of the reflected light. This work therefore represents a fast, high resolution, programmable and maskless alternative to current photo and electron beam lithography-based procedures and provides a time efficient process for prototyping of small period, high aspect ratio grating magneto-optical traps and other high resolution structures.

On the Design of Soret Zone Plates Based on Binary Sequences Using Directional Transducers

In this work, we analyze the effect of the distribution of transparent Fresnel regions over the focusing profile of Soret Zone Plates (SZP) based on binary sequences. It is shown that this effect becomes very significant in those fields where directional transducers are employed, such as microwaves or acoustics. A thorough analysis of both the SZP transmission efficiency and the focusing enhancement factor is presented. Moreover, experimental measurements are also carried out for a particular type of binary sequence, the Cantor ternary set, validating the theoretical model and demonstrating that the distribution of transparent Fresnel regions becomes a critical parameter in applications requiring directional emitters.

Analysis of Predistortion Techniques on Fresnel Zone Plates in Ultrasound Applications

In this work, we analyze the effect of predistortion techniques on the focusing profile of Fresnel Zone Plates (FZPs) in ultrasound applications. This novel predistortion method is based on either increasing or decreasing the width of some of the FZP Fresnel rings by a certain amount. We investigate how the magnitude of the predistortion, as well as the number and location of the predistorted rings, influences the lens focusing profile. This focusing profile can be affected in different ways depending on the area of the lens where the predistortion is applied. It is shown that when the inner area of the lens, closer to its center, is predistorted, this technique allows the control of the focal depth at the main focus. However, when the predistortion is applied to an area farther from the center of the lens, the acoustic intensity distribution among the main focus and the closest adjacent secondary foci can be tailored at a certain degree. This predistortion technique shows great potential and can be used to control, modify and shape the FZP focusing profile in both industrial and therapeutic applications.

Forecasting COVID-19 Severity by Intelligent Optical Fingerprinting of Blood Samples

Forecasting COVID-19 disease severity is key to supporting clinical decision making and assisting resource allocation, particularly in intensive care units (ICUs). Here, we investigated the utility of time- and frequency-related features of the backscattered signal of serum patient samples to predict COVID-19 disease severity immediately after diagnosis. ICU admission was the primary outcome used to define disease severity. We developed a stacking ensemble machine learning model including the backscattered signal features (optical fingerprint), patient comorbidities, and age (AUROC = 0.80), which significantly outperformed the predictive value of clinical and laboratory variables available at hospital admission (AUROC = 0.71). The information derived from patient optical fingerprints was not strongly correlated with any clinical/laboratory variable, suggesting that optical fingerprinting brings unique information for COVID-19 severity risk assessment. Optical fingerprinting is a label-free, real-time, and low-cost technology that can be easily integrated as a front-line tool to facilitate the triage and clinical management of COVID-19 patients.

Spatio-temporal ultrasound beam modulation to sequentially achieve multiple foci with a single planar monofocal lens

Ultrasound focusing is a hot topic due to its multiple applications in many fields, including biomedical imaging, thermal ablation of cancerous tissues, and non destructive testing in industrial environments. In such applications, the ability to control the focal distance of the ultrasound device in real-time is a key advantage over conventional devices with fixed focal parameters. Here, we present a method to achieve multiple time-modulated ultrasound foci using a single planar monofocal Fresnel Zone Plate. The method takes advantage of the focal distance linear dependence on the operating frequency of this kind of lenses to design a sequence of contiguous modulated rectangular pulses that achieve different focal distances and intensities as a function of time. Both numerical simulations and experimental results are presented, demonstrating the feasibility and potential of this technique.

Ultrahigh numerical aperture meta-fibre for flexible optical trapping

Strong focusing on diffraction-limited spots is essential for many photonic applications and is particularly relevant for optical trapping; however, all currently used approaches fail to simultaneously provide flexible transportation of light, straightforward implementation, compatibility with waveguide circuitry, and strong focusing. Here, we demonstrate the design and 3D nanoprinting of an ultrahigh numerical aperture meta-fibre for highly flexible optical trapping. Taking into account the peculiarities of the fibre environment, we implemented an ultrathin meta-lens on the facet of a modified single-mode optical fibre via direct laser writing, leading to a diffraction-limited focal spot with a record-high numerical aperture of up to NA ≈ 0.9. The unique capabilities of this flexible, cost-effective, bio- and fibre-circuitry-compatible meta-fibre device were demonstrated by optically trapping microbeads and bacteria for the first time with only one single-mode fibre in combination with diffractive optics. Our study highlights the relevance of the unexplored but exciting field of meta-fibre optics to a multitude of fields, such as bioanalytics, quantum technology and life sciences.

Optical Tweezers Exploring Neuroscience

Over the past decade, optical tweezers (OT) have been increasingly used in neuroscience for studies of molecules and neuronal dynamics, as well as for the study of model organisms as a whole. Compared to other areas of biology, it has taken much longer for OT to become an established tool in neuroscience. This is, in part, due to the complexity of the brain and the inherent difficulties in trapping individual molecules or manipulating cells located deep within biological tissue. Recent advances in OT, as well as parallel developments in imaging and adaptive optics, have significantly extended the capabilities of OT. In this review, we describe how OT became an established tool in neuroscience and we elaborate on possible future directions for the field. Rather than covering all applications of OT to neurons or related proteins and molecules, we focus our discussions on studies that provide crucial information to neuroscience, such as neuron dynamics, growth, and communication, as these studies have revealed meaningful information and provide direction for the field into the future.

3D direct laser writing of microstructured optical fiber tapers on single-mode fibers for mode-field conversion

We present a design and fabrication approach for 3D printed polymer microstructured optical fiber tapers on standard single-mode glass fibers for efficient and compact mode-field conversion. This paves the way towards complex functionalized fiber tips for various applications, like sensors and beam shaping components, currently limited by the mode-field size and distribution of standard optical fibers. In this paper, we demonstrate the potential of mode-field converting tapers for relaxing the misalignment tolerance in fiber-to-fiber connections and maximizing the coupling efficiency in fiber-to-chip connections. We demonstrate a mode-field diameter expansion ratio of 1.7 and reduction ratio of 3 and show that our microstructured tapers achieve a comparable performance in coupling efficiency as their step-index counterparts, while providing greater robustness.

iLoF: An intelligent Lab on Fiber Approach for Human Cancer Single-Cell Type Identification

With the advent of personalized medicine, there is a movement to develop "smaller" and "smarter" microdevices that are able to distinguish similar cancer subtypes. Tumor cells display major differences when compared to their natural counterparts, due to alterations in fundamental cellular processes such as glycosylation. Glycans are involved in tumor cell biology and they have been considered to be suitable cancer biomarkers. Thus, more selective cancer screening assays can be developed through the detection of specific altered glycans on the surface of circulating cancer cells. Currently, this is only possible through time-consuming assays. In this work, we propose the "intelligent" Lab on Fiber (iLoF) device, that has a high-resolution, and which is a fast and portable method for tumor single-cell type identification and isolation. We apply an Artificial Intelligence approach to the back-scattered signal arising from a trapped cell by a micro-lensed optical fiber. As a proof of concept, we show that iLoF is able to discriminate two human cancer cell models sharing the same genetic background but displaying a different surface glycosylation profile with an accuracy above 90% and a speed rate of 2.3 seconds. We envision the incorporation of the iLoF in an easy-to-operate microchip for cancer identification, which would allow further biological characterization of the captured circulating live cells.

Bifocal Ultrasound Focusing Using Bi-Fresnel Zone Plate Lenses

In this work, we present a bifocal Fresnel zone plate (BiFZP) capable of generating focusing profiles with two different foci. The performance of the BiFZP is demonstrated in the ultrasound domain, with a very good agreement between the experimental measurements and the finite element method (FEM) simulations. This lens becomes an appealing alternative to other dual-focusing lenses, in which the foci location can only be set at a limited range of positions, such as M-bonacci zone plates. Moreover, the variation of the operating frequency has also been analyzed, providing an additional dynamic control parameter in this type of lenses.

Fractal lenses based on Cantor binary sequences for ultrasound focusing applications

In this work, we demonstrate the application of Cantor fractal lenses in acoustics. The Cantor Zone Plate (CZP), previously introduced in optics, is designed from a conventional Fresnel Zone Plate (FZP) using a binary sequence governed by the distribution of a generalized Cantor set. The CZP maintains its main focus at the same focal distance than its associated FZP, providing a softer multi-foci focusing profile which is very useful in certain ultrasound therapeutic applications. Experimental measurements are in good agreement with the theoretical model, demonstrating that CZPs are suitable for the ultrasound field.

M-Bonacci Zone Plates for Ultrasound Focusing

In this work, we present a thorough analysis on M-bonacci zone plates for ultrasound focusing applications. These planar lenses are capable of providing bifocal focusing profiles with equal intensity in both foci and become very appealing for a wide range of scenarios including medical and industrial applications. We show that in high-wavelength domains, such as acoustics or microwaves, the separation between both foci can be finely adjusted at the expense of slightly increasing the distortion of the focusing profile, and we introduce a design parameter to deal with this issue and simplify the design process of these lenses. Experimental measurements are in good agreement with numerical simulations and demonstrate the potential of M-bonacci lenses in ultrasound focusing applications.

Evaluation of Nanoplasmonic Optical Fiber Sensors Based on D-Type and Suspended Core Fibers with Metallic Nanowires

The introduction of metallic nanostructures in optical fibers has revolutionized the field of plasmonic sensors since they produce sharper and fine-tuned resonances resulting in higher sensitivities and resolutions. This article evaluates the performance of three different plasmonic optical fiber sensors based on D-type and suspended core fibers with metallic nanowires. It addresses how their different materials, geometry of the components, and their relative position can influence the coupling between the localized plasmonic modes and the guided optical mode. It also evaluates how that affects the spatial distributions of optical power of the different modes and consequently their overlap and coupling, which ultimately impacts the sensor performance. In this work, we use numerical simulations based on finite element methods to validate the importance of tailoring the features of the guided optical mode to promote an enhanced coupling with the localized modes. The results in terms of sensitivity and resolution demonstrate the advantages of using suspended core fibers with metallic nanowires.

Design of Hierarchical Beads for Efficient Label-Free Cell Capture

Defined hierarchical materials promise cell analysis and call for application-driven design in practical use. The further issue is to develop advanced materials and devices for efficient label-free cell capture with minimum instrumentation. Herein, the design of hierarchical beads is reported for efficient label-free cell capture. Silica nanoparticles (size of ≈15 nm) are coated onto silica spheres (size of ≈200 nm) to achieve nanoscale surface roughness, and then the rough silica spheres are combined with microbeads (≈150-1000 µm in diameter) to assemble hierarchical structures. These hierarchical beads are built via electrostatic interaction, covalent bonding, and nanoparticle adherence. Further, after functionalization by hyaluronic acid (HA), the hierarchical beads display desirable surface hydrophilicity, biocompatibility, and chemical/structural stability. Due to the controlled surface topology and chemistry, HA-functionalized hierarchical beads afford high cell capture efficiency up to 98.7% in a facile label-free manner. This work guides the development of label-free cell capture techniques and contributes to the construction of smart interfaces in bio-systems.

Optical fiber-based sensing method for nanoparticle detection through supervised back-scattering analysis: a potential contributor for biomedicine

Background

In view of the growing importance of nanotechnologies, the detection/identification of nanoparticles type has been considered of utmost importance. Although the characterization of synthetic/organic nanoparticles is currently considered a priority (eg, drug delivery devices, nanotextiles, theranostic nanoparticles), there are many examples of “naturally” generated nanostructures – for example, extracellular vesicles (EVs), lipoproteins, and virus – that provide useful information about human physiology or clinical conditions. For example, the detection of tumor-related exosomes, a specific type of EVs, in circulating fluids has been contributing to the diagnosis of cancer in an early stage. However, scientists have struggled to find a simple, fast, and low-cost method to accurately detect/identify these nanoparticles, since the majority of them have diameters between 100 and 150 nm, thus being far below the diffraction limit.

Methods

This study investigated if, by projecting the information provided from short-term portions of the back-scattered laser light signal collected by a polymeric lensed optical fiber tip dipped into a solution of synthetic nanoparticles into a lower features dimensional space, a discriminant function is able to correctly detect the presence of 100 nm synthetic nanoparticles in distilled water, in different concentration values.

Results and discussion

This technique ensured an optimal performance (100% accuracy) in detecting nanoparticles for a concentration above or equal to 3.89 µg/mL (8.74E+10 particles/mL), and a performance of 90% for concentrations below this value and higher than 1.22E−03 µg/mL (2.74E+07 particles/mL), values that are compatible with human plasmatic levels of tumor-derived and other types of EVs, as well as lipoproteins currently used as potential biomarkers of cardiovascular diseases.

Conclusion

The proposed technique is able to detect synthetic nanoparticles whose dimensions are similar to EVs and other “clinically” relevant nanostructures, and in concentrations equivalent to the majority of cell-derived, platelet-derived EVs and lipoproteins physiological levels. This study can, therefore, provide valuable insights towards the future development of a device for EVs and other biological nanoparticles detection with innovative characteristics.

Optical Manipulation along an Optical Axis with a Polarization Sensitive Meta-Lens

The ability to manipulate small objects with focused laser beams opens a broad spectrum of opportunities in fundamental and applied studies, for which precise control over mechanical path and stability is required. Although conventional optical tweezers are based on refractive optics, the development of compact trapping devices that could be integrated within fluid cells is in high demand. Here, a plasmonic polarization-sensitive metasurface-based lens, embedded within a fluid, is demonstrated to provide several stable trapping centers along the optical axis. The position of a particle is controlled with the polarization of the incident light, interacting with plasmonic nanoscale patch antennas, organized within overlapping Fresnel zones of the lens. While standard diffractive optical elements face challenges in trapping objects in the axial direction outside the depth of focus, bifocal Fresnel meta-lens demonstrates the capability to manipulate a bead along a 4 μm line. An additional fluorescent module, incorporated within the optical trapping setup, was implemented and enabled the accurate mapping of optical potentials via a particle-tracking algorithm. Auxiliary micro- and nanostructures, integrated within fluidic devices, provide numerous opportunities to achieve flexible optomechanical manipulation, including transport, trapping, and sorting, which are in high demand for lab-on-a-chip applications and many others.

Integrating Free-Form Nanostructured GRIN Microlenses with Single-Mode Fibers for Optofluidic Systems

We present both a theoretical and an experimental study of a novel compact lensed fiber system utilizing a nanostructured GRIN lens. The lens can be integrated with an optical fiber, which ensures a unique and efficient focusing in any high index medium, such as a liquid. We use the effective medium approach to design lenses with arbitrary refractive index. To fabricate lenses, we utilize a discrete array of nano-sized rods made of two types of glasses, and apply a standard stack-and-draw fiber drawing technology. The fabricated nanostructured GRIN lenses have a parabolic refractive index profile with a diameter of a standard fiber, very short working distances (55 µm in the air) and a high numerical aperture (NA = 0.16). As a proof-of-concept of the new micro-lensed fiber system, we demonstrate an experiment on optical trapping of micrometer-sized glass beads. We also show that our method is compatible with optical fiber technology and allows for any shape of the refractive index distribution in 2D. Thanks to that a new functionality could be achieved by replacing the GRIN lens with an axicon lens, vortex type elements, micro-lenses arrays or diffraction elements.

Single Particle Differentiation through 2D Optical Fiber Trapping and Back-Scattered Signal Statistical Analysis: An Exploratory Approach

Recent trends on microbiology point out the urge to develop optical micro-tools with multifunctionalities such as simultaneous manipulation and sensing. Considering that miniaturization has been recognized as one of the most important paradigms of emerging sensing biotechnologies, optical fiber tools, including Optical Fiber Tweezers (OFTs), are suitable candidates for developing multifunctional small sensors for Medicine and Biology. OFTs are flexible and versatile optotools based on fibers with one extremity patterned to form a micro-lens. These are able to focus laser beams and exert forces onto microparticles strong enough (piconewtons) to trap and manipulate them. In this paper, through an exploratory analysis of a 45 features set, including time and frequency-domain parameters of the back-scattered signal of particles trapped by a polymeric lens, we created a novel single feature able to differentiate synthetic particles (PMMA and Polystyrene) from living yeasts cells. This single statistical feature can be useful for the development of label-free hybrid optical fiber sensors with applications in infectious diseases detection or cells sorting. It can also contribute, by revealing the most significant information that can be extracted from the scattered signal, to the development of a simpler method for particles characterization (in terms of composition, heterogeneity degree) than existent technologies.

Metallic Fresnel zone plate implemented on an optical fiber facet for super-variable focusing of light

We propose and investigate a metallic Fresnel zone plate (FZP/MFZP) implemented on a silver-coated optical fiber facet for super-variable focusing of light, the focal point of which can be drastically relocated by varying the wavelength of the incident light. We numerically show that when its nominal focal length is set to 20 μm at 550 nm, its effective focal length can be tuned by ~13.7 μm for 300-nm change in the visible wavelength range. This tuning sensitivity is over 20 times higher than that of a conventional silica-based spherical lens. Even with such high tuning sensitivity with respect to the incident wavelength change, the effective beam radius at the focal point is preserved nearly unchanged, irrespective of the incident wavelength. Then, we fabricate the proposed device, exploiting electron- and focused-ion-beam processes, and experimentally verify its super-variable focusing functionality at typical red, green, and blue wavelengths in the visible wavelength range, which is in good agreement with the numerical prediction. Moreover, we propose a novel MFZP structure that primarily exploits the surface-plasmon-polariton-mediated, extra-ordinary transmission effect. For this we make all the openings of an MFZP, which are determined by the fundamental FZP design formula, be partitioned by multi-rings of all-sub-wavelength annular slits, so that the transmission of azimuthally polarized light is inherently prohibited, thereby leading to super-variable and selective focusing of radially polarized light. We design and fabricate a proof-of-principle structure implemented on a gold-coated fused-silica substrate, and verify its novel characteristics both numerically and experimentally, which are mutually in good agreement. We stress that both the MFZP structures proposed here will be very useful for micro-machining, optical trapping, and biomedical sensing, in particular, which invariably seek compact, high-precision, and flexible focusing schemes.