Rapid synthesis and decoration of reduced graphene oxide with gold nanoparticles by thermostable peptides for memory device and photothermal applications

Catalytically Active Gold Nanoparticles on Star Block Co-polymer Matrix: Synthesis of Nanocomposite Film Exploring the Langmuir-Blodgett Technique

Nanocomposites with metal nanoparticles and block copolymers distributed in a stable and robust thin film are preferred for various applications. Here, synthesis of such a nanocomposite is reported, which is composed of gold nanoparticles (AuNPs) embedded in a tetronic 701 (T701) and 90R4 (T90R4) thin film matrix generated using the Langmuir-Blodgett (LB) thin film technique. Tetronics contain a monoprotonated central ethylenediamine group at pH 5 due to the presence of chloroauric acid (HAuCl4) in the subphase, along with poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) blocks, both of which have the capacity to serve as the reducing agent toward chloroaurate anion (AuCl4-). Calorimetric experiments have shown that T90R4 has a better interaction with AuCl4-, probably due to its better electrostatic interaction with AuCl4- ions due to the higher % of the hydrophilic PEO group. On the other hand, the T701-AuNP interaction turned out to be more spontaneous due to the higher hydrophobicity of T701 (higher PPO/PEO ratio). The optical properties and structure/morphology of these nanocomposites are characterized by UV-vis spectroscopy, FTIR spectroscopy, XRD, and TEM. The composite thin film has the ability to catalyze the organic electron transfer process between p-nitrophenol and p-aminophenol in the presence of sodium borohydride. A clear correlation has been found between the reaction rates and the kind of tetronic present in the nanocomposite, which acted as a matrix and stabilizer toward AuNPs.

Development of a two-dimensional peptide functionalized-reduced graphene oxide biomaterial for wound care applications

Increased incidences of antibiotic resistance have necessitated the development of novel wound disinfection strategies with minimal risk of resistance development. This study aimed at developing a biocompatible wound dressing biomaterial with the potential to treat acute and chronic wounds infected with multidrug-resistant Pseudomonas aeruginosa. A multifunctional antibacterial nanoconjugate was synthesized by covalently coupling a synthetically designed peptide (DP1, i.e., RFGRFLRKILRFLKK) with reduced graphene oxide (rGO). The conjugate displayed antibacterial and antibiofilm activities against multidrug-resistant Pseudomonas aeruginosa. In vitro studies demonstrated 94% hemocompatibility of the nanoconjugate even at concentrations as high as 512 μg mL-1. Cytotoxicity studies on 3T3-L1 cells showed 95% cell viability, signifying biocompatibility. Owing to these properties, the biomedical applicability of the nanoconjugate was assessed as an antibacterial wound dressing agent. rGO-DP1-loaded wound dressing exhibited enhanced reduction in bacterial bioburden (6 log 10 CFU) with potential for wound re-epithelization (77.3%) compared to the uncoated bandage. Moreover, an improvement in the material properties of the bandage was observed in terms of enhanced tensile strength and decreased elongation at break (%). Collectively, these findings suggest that rGO-DP1 is an effective biomaterial that, when loaded on wound dressings, has the potential to be used as a facile, sustainable and progressive agent for bacterial wound disinfection as well as healing.

Oxidative stress modulating nanomaterials and their biochemical roles in nanomedicine

Many pathological conditions are predominantly associated with oxidative stress, arising from reactive oxygen species (ROS); therefore, the modulation of redox activities has been a key strategy to restore normal tissue functions. Current approaches involve establishing a favorable cellular redox environment through the administration of therapeutic drugs and redox-active nanomaterials (RANs). In particular, RANs not only provide a stable and reliable means of therapeutic delivery but also possess the capacity to finely tune various interconnected components, including radicals, enzymes, proteins, transcription factors, and metabolites. Here, we discuss the roles that engineered RANs play in a spectrum of pathological conditions, such as cancer, neurodegenerative diseases, infections, and inflammation. We visualize the dual functions of RANs as both generator and scavenger of ROS, emphasizing their profound impact on diverse cellular functions. The focus of this review is solely on inorganic redox-active nanomaterials (inorganic RANs). Additionally, we deliberate on the challenges associated with current RANs-based approaches and propose potential research directions for their future clinical translation.

Coupled adsorption-photocatalysis process for the removal of diclofenac using magnetite/reduced graphene oxide nanocomposite

Diclofenac (DCF) is frequently detected in water bodies (ng/L to g/L) as it is not completely removed by conventional wastewater treatment plants. Adsorption and photocatalysis have been studied as promising methods for treating DCF; however, both processes have limitations. Thus, in this study, the removal efficiency of DCF is evaluated using a magnetite/reduced graphene oxide (Fe3O4/RGO) nanocomposite via a coupled adsorption-catalysis process. The Fe3O4/RGO nanocomposite was successfully synthesized using a microwave-assisted solvothermal method and exhibited a bandgap of 2.60 eV. The kinetic data best fitted the Elovich model (R2 = 0.994, χ2 = 0.29), indicating rapid adsorption. The maximum DCF adsorption capacity calculated using the Langmuir model was 80.33 mg/g. An ultraviolet C (UVC) light source and 0.1 g/L of Fe3O4/RGO nanocomposite were the optimum conditions for the removal of DCF (C0 = 30 mM) by a coupled adsorption-photocatalysis process (first-order rate constant (k) = 0.088/min), which was greater than the single adsorption (k = 0.029/min) and pre-adsorption and post-photocatalysis (k = 0.053/min) processes. This indicates that the adsorbed DCF did not hamper the photocatalytic reaction of the Fe3O4/RGO nanocomposite, but rather enhanced the coupled adsorption-photocatalytic reaction. DCF removal efficiency was higher at acidic conditions (pH 4.3-5.0), because high H+ promotes the generation of certain reactive oxygen species (ROS) and increases of electrostatic interaction. The presence of NaCl and CaCl2 (10 mM) did not notably affect the total DCF removal efficiency; however, Ca2+ affected the initial DCF adsorption affinity. Scavenger experiments demonstrated O2∙- and h+ play a key ROS than ·OH to degrade DCF. The acute toxicity of DCF towards Aliivibrio fischeri gradually decreased with increasing treatment time.

Emerging Field of Nanotechnology in Environment

The art of utilizing and manipulating micro materials have been dated back to antient era. With the advancement in technologies, the state-of-art methods of nano technologies and nano sciences has been employed in various sectors including environment, product designing, food industry, pharmaceuticals industries to way out solve standard problem of mankind. Due to rapid industrialization and the alarming levels of pollution there has been an urgent need to address the environmental and energy issues. Environmental sustainability concerns the global climate change and pollution including air, water, soil. The field of nanotechnology has proven to be a promising field where sensing and remediation, have been dramatically advanced by the use of nanomaterials. This emergent science of surface to mass ratio is the principle theorem for manipulating structure at molecular levels. The review sums up all the advancements in the field of nanotechnology and their recent application in the environment. New opportunities and challenges have also been discussed in detail to understand the use of nanotechnology as problem-to-solution ratio.

Graphical abstract

Image depicting the application of nanotechnology in environmental concerns. The combinations of technologies like bioremediations, bioaugmentations with state-of-the-art nanotechnology like carbon nanotubes and Nano capsules to answer the environmental challenges of soil quality, and plant productivity.

Green synthesis of reduced graphene oxide/chitosan/gold nanoparticles composites and their catalytic activity for reduction of 4-nitrophenol

Gold nanoparticles (AuNPs) have attracted extensive attention in the past few years due to their unique properties and great potential application in catalysis. However, the application of AuNPs remains a significant challenge due to the lack of high efficiency and stability caused by aggregation. Immobilization of AuNPs on appropriate support shows promising results in avoiding aggregation and improving catalytic activity. In this work, reduced graphene oxide/chitosan/gold nanoparticles (rGO/CHS/AuNPs) composites were prepared using chitosan with different molecular weights (MW) as a reducing agent and stabilizer, and characterized by FT-IR, XRD, XPS, SEM, FESEM, EDS, TEM, HRTEM, and TGA. The preparation conditions of rGO/CHS/AuNPs composites, including chitosan MW, CHS/GO mass ratio, reaction temperature and time, and HAuCl₄ concentration were investigated in detail. The results indicated that reduction activity of chitosan for GO increased with the decrease of chitosan MW. The C/O ratio of rGO reduced by low molecular weight chitosan (LMWC) with viscosity-average molecular weight (Mv) of 21 kDa was 6.34. Small spherical AuNPs were uniformly immobilized on the rGO surface. The particle size of AuNPs increased from 9.29 to 13.03 nm as chitosan MW decreased from 465 to 21 kDa. The rGO/CHS/AuNPs showed good catalytic activity for the reduction of 4-NP in the presence of NaBH₄. The catalytic activity of rGO/CHS/AuNPs was closely related to chitosan MW. rGO/CHS/AuNPs synthesized by LMWC with Mv of 21 kDa showed the highest kinetic rate constant of 0.2067 min^-1. The results of this experimental study could be useful in the development of effective catalysts for the reduction of aromatic nitro compounds.

Multi-Mode Lanthanide-Doped Ratiometric Luminescent Nanothermometer for Near-Infrared Imaging within Biological Windows

Owing to its high reliability and accuracy, the ratiometric luminescent thermometer can provide non-contact and fast temperature measurements. In particular, the nanomaterials doped with lanthanide ions can achieve multi-mode luminescence and temperature measurement by modifying the type of doped ions and excitation light source. The better penetration of the near-infrared (NIR) photons can assist bio-imaging and replace thermal vision cameras for photothermal imaging. In this work, we prepared core-shell cubic phase nanomaterials doped with lanthanide ions, with Ba₂LuF₇ doped with Er³⁺/Yb³⁺/Nd³⁺ as the core and Ba₂LaF₇ as the coating shell. The nanoparticles were designed according to the passivation layer to reduce the surface energy loss and enhance the emission intensity. Green upconversion luminescence can be observed under both 980 nm and 808 nm excitation. A single and strong emission band can be obtained under 980 nm excitation, while abundant and weak emission bands appear under 808 nm excitation. Meanwhile, multi-mode ratiometric optical thermometers were achieved by selecting different emission peaks in the NIR window under 808 nm excitation for non-contact temperature measurement at different tissue depths. The results suggest that our core-shell NIR nanoparticles can be used to assist bio-imaging and record temperature for biomedicine.

Electronic Properties of Hexagonal Graphene Quantum Rings from TAO-DFT

The reliable prediction of electronic properties associated with graphene nanosystems can be challenging for conventional electronic structure methods, such as Kohn-Sham (KS) density functional theory (DFT), due to the presence of strong static correlation effects in these systems. To address this challenge, TAO (thermally assisted occupation) DFT has been recently proposed. In the present study, we employ TAO-DFT to predict the electronic properties of n-HGQRs (i.e., the hexagonal graphene quantum rings consisting of n aromatic rings fused together at each side). From TAO-DFT, the ground states of n-HGQRs are singlets for all the cases investigated (n = 3-15). As the system size increases, there should be a transition from the nonradical to polyradical nature of ground-state n-HGQR. The latter should be intimately related to the localization of active TAO-orbitals at the inner and outer edges of n-HGQR, which increases with increasing system size.

Evaluation of TiO2 Nanoparticles Physicochemical Parameters Associated with their Antimicrobial Applications

Titanium dioxide nanoparticles (TiO2NPs) usage is increasing in everyday consumer products, hence, assessing their toxic impacts on living organisms and environment is essential. Various studies have revealed the significant role of TiO2NPs physicochemical properties on their toxicity. However, TiO2NPs are still poorly characterized with respect to their physicochemical properties, and environmental factors influencing their toxicity are either ignored or are too complex to be assessed under laboratory conditions. The outcomes of these studies are diverse and inconsistent due to lack of standard protocols. TiO2NPs toxicity also differs for in vivo and in vitro systems, which must also be considered during standardization of protocols to maintain uniformity and reproducibility of results. This review critically evaluates impact of different physicochemical parameters of TiO2NPs and other experimental conditions, employed in different laboratories in determining their toxicity towards bacteria. These important observations may be helpful in evaluation of environmental risks posed by these nanoparticles and this can further assist regulatory bodies in policymaking.

Chitosan IR806 dye-based polyelectrolyte complex nanoparticles with mitoxantrone combination for effective chemo-photothermal therapy of metastatic triple-negative breast cancer

Chemo-photothermal therapy is one of the emerging therapies for treating triple-negative breast cancer. In this study, we have used ionotropic gelation method to fabricate chitosan and IR806 dye-based polyelectrolyte complex (CIR-PEx) nanoparticles. These nano-complexes were in size range of 125 ± 20 nm. The complexation of IR 806 dye with chitosan improved photostability, photothermal transduction, and showed excellent biocompatibility. Cancer cells treated with CIR-PEx NPs enhanced intracellular uptake within 5 h of incubation and also displayed mitochondrial localization. With the combination of CIR-PEx NPs and a chemotherapeutic agent (i.e., mitoxantrone, MTX), a significant decline in cancer cell viability was observed in both 2D and 3D cell culture models. The chemo-photothermal effect of CIR-PEx NPs + MTX augmented apoptosis in cancer cells when irradiated with NIR light. Furthermore, when tested in the 4 T1-tumor model, the chemo-photothermal therapy showed a drastic decline in tumor volume and inhibited metastatic lung nodules. The localized hyperthermia caused by photothermal therapy reduced the primary tumor burden, and the chemotherapeutic activity of mitoxantrone further complemented by inhibiting the spread of cancer cells. The proposed chemo-photothermal therapy combination could be a promising strategy for treating triple-negative metastatic breast cancer.

Graphene oxide decorated with gold enables efficient biophotovolatic cells incorporating photosystem I

This paper describes the use of reduced graphene oxide decorated with gold nanoparticles as an efficient electron transfer layer for solid-state biophotovoltic cells containing photosystem I as the sole photo-active component. Together with polytyrosine–polyaniline as a hole transfer layer, this device architecture results in an open-circuit voltage of 0.3 V, a fill factor of 38% and a short-circuit current density of 5.6 mA cm⁻² demonstrating good coupling between photosystem I and the electrodes. The best-performing device reached an external power conversion efficiency of 0.64%, the highest for any solid-state photosystem I-based photovoltaic device that has been reported to date. Our results demonstrate that the functionality of photosystem I in the non-natural environment of solid-state biophotovoltaic cells can be improved through the modification of electrodes with efficient charge-transfer layers. The combination of reduced graphene oxide with gold nanoparticles caused tailoring of the electronic structure and alignment of the energy levels while also increasing electrical conductivity. The decoration of graphene electrodes with gold nanoparticles is a generalizable approach for enhancing charge-transfer across interfaces, particularly when adjusting the levels of the active layer is not feasible, as is the case for photosystem I and other biological molecules.

This paper describes the use of reduced graphene oxide decorated with gold nanoparticles as an efficient electron transport layer for solid-state biophotovoltic cells containing photosystem I as the sole photo-active component.

Nano-Biocatalysts: Potential Biotechnological Applications

Biocatalysts are a biomolecule of interest for various biotechnological applications. Non-reusability and poor stability of especially enzymes has always limited their applications in large-scale processing units. Nanotechnology paves a way by conjugating the biocatalysts on different matrices. It predominantly enables nanomaterials to overcome the limited efficacy of conventional biocatalysts. Nanomaterial conjugated nanobiocatalyst have enhanced catalytic properties, selectivity, and stability. Nanotechnology extended the flexibility to engineer biocatalysts for various innovative and predictive catalyses. So developed nanobiocatalyst harbors remarkable properties and has potential applications in diverse biotechnological sectors. This article summaries various developments made in the area of nanobiocatalyst towards their applications in biotechnological industries. Novel nanobiocatalyst engineering is an area of critical importance for harnessing the biotechnological potential.

Anaerobic Digestion of Agri-Food Wastes for Generating Biofuels

Presently, fossil fuels are extensively employed as major sources of energy, and their uses are considered unsustainable due to emissions of obnoxious gases on the burning of fossil fuels, which can lead to severe environmental complications, including human health. To tackle these issues, various processes are developing to waste as a feed to generate eco-friendly fuels. The biological production of fuels is considered to be more beneficial than physicochemical methods due to their environmentally friendly nature, high rate of conversion at ambient physiological conditions, and less energy-intensive. Among various biofuels, hydrogen (H₂) is considered as a wonderful due to high calorific value and generate water molecule as end product on the burning. The H₂ production from biowaste is demonstrated, and agri-food waste can be potentially used as a feedstock due to their high biodegradability over lignocellulosic-based biomass. Still, the H₂ production is uneconomical from biowaste in fuel competing market because of low yields and increased capital and operational expenses. Anaerobic digestion is widely used for waste management and the generation of value-added products. This article is highlighting the valorization of agri-food waste to biofuels in single (H₂) and two-stage bioprocesses of H₂ and CH₄ production.

Antimicrobial and Antioxidant Potential of Vernonia Cinerea Extract Coated AuNPs

Abstract

Green synthesis of nanoparticles is an important tool to reduce the harmful effects associated with traditional methods. In the present investigation, we have synthesised gold nanoparticles (AuNPs) using aqueous extract prepared from fresh aerial parts (leaf and stem) of Vernonia cinerea as bioreducing agent. The visual indication of change in colour from pale yellow to brown to ruby-red indicated the successful formation of the AuNPs. Characterization of nanoparticles was carried out by UV-visible spectroscopy, X-ray crystallography (XRD), Transmission electron microscopy (TEM) and Energy dispersive X-ray analysis (EDX). UV-Vis spectra showed a specific peak at 546 nm which was the initial confirmation of the biosynthesized AuNPs. TEM images showed spherical and triangular shape of AuNPs with an average size of 25 nm. From FTIR spectrum, different functional groups were identified that could be responsible for the formation, stabilization, and capping of biosynthesized AuNPs. Aqueous plant extract and biosynthesised AuNPs were separately tested for their antimicrobial activity against six bacterial strains and four fungal strains. Biosynthesised AuNPs (2 mg/ml) showed significantly high zone of inhibition against the selected bacterial strains as compared to the aqueous plant extract. Maximum zone of inhibition (18.2 mm) was observed with AuNPs against Streptococcus pyogenes whereas comparatively less value (12.5 mm) was recorded with the plant extract. Interestingly, the inhibitory activity observed against bacterial strains was even better than ampicillin. Antifungal activity recorded with AuNPs (5 mg/ml) was maximum (17.4 mm) against R. oryzae and it was higher than positive control (17.00 mm) and plant extract (13.2 mm).The present study clearly showed that AuNPs coated with Vernonia cinerea extract were as good as positive control in inhibiting bacterial and fungal growth. In addition, these AuNPs also showed good antioxidant potential which was comparable to ascorbic acid.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s12088-021-00976-w.

Recent advances in the synthesis and applications of graphene-polypeptide nanocomposites

The combination of peptides and graphene-derived materials provides a new way to prepare graphene-based nanocomposites with unique structures, properties, and functions. The modification of graphene with different polypeptides not only improves the biocompatibility and biological recognition ability of graphene-based materials, but also greatly expands their application fields. In this work, we summarize different interactions between graphene and polypeptides, and the synthesis methods of novel functional graphene-polypeptide nanocomposites based on the interactions in recent years (from 2016 to present). In addition, the potential applications of graphene-peptide hybrid nanocomposites in biomedicine, tissue engineering, biosensors, environmental science engineering, optoelectronic materials, and energy storage are introduced. We hope that this review will help readers to understand the methods and mechanisms of the modification of graphene surfaces with biomolecules, and promote readers to understand the synthesis and applications of graphene-based nanocomposites. This work may provide hints and references for the development of peptide sequence design, and biomedical and functional materials, and will help in designing and synthesizing novel graphene-based nanomaterials with unique properties and suitable for various applications in the future.

Graphene and its derivatives: understanding the main chemical and medicinal chemistry roles for biomedical applications

Over the past few years, there has been a growing potential use of graphene and its derivatives in several biomedical areas, such as drug delivery systems, biosensors, and imaging systems, especially for having excellent optical, electronic, thermal, and mechanical properties. Therefore, nanomaterials in the graphene family have shown promising results in several areas of science. The different physicochemical properties of graphene and its derivatives guide its biocompatibility and toxicity. Hence, further studies to explain the interactions of these nanomaterials with biological systems are fundamental. This review has shown the applicability of the graphene family in several biomedical modalities, with particular attention for cancer therapy and diagnosis, as a potent theranostic. This ability is derivative from the considerable number of forms that the graphene family can assume. The graphene-based materials biodistribution profile, clearance, toxicity, and cytotoxicity, interacting with biological systems, are discussed here, focusing on its synthesis methodology, physicochemical properties, and production quality. Despite the growing increase in the bioavailability and toxicity studies of graphene and its derivatives, there is still much to be unveiled to develop safe and effective formulations.

Graphic abstract

Boron and Gadolinium Loaded Fe3O4 Nanocarriers for Potential Application in Neutron Capture Therapy

In this article, a novel method of simultaneous carborane- and gadolinium-containing compounds as efficient agents for neutron capture therapy (NCT) delivery via magnetic nanocarriers is presented. The presence of both Gd and B increases the efficiency of NCT and using nanocarriers enhances selectivity. These factors make NCT not only efficient, but also safe. Superparamagnetic Fe3O4 nanoparticles were treated with silane and then the polyelectrolytic layer was formed for further immobilization of NCT agents. Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), energy dispersive X-ray (EDX), ultraviolet-visible (UV-Vis) and Mössbauer spectroscopies, dynamic light scattering (DLS), scanning electron microscopy (SEM), vibrating-sample magnetometry (VSM) were applied for the characterization of the chemical and element composition, structure, morphology and magnetic properties of nanocarriers. The cytotoxicity effect was evaluated on different cell lines: BxPC-3, PC-3 MCF-7, HepG2 and L929, human skin fibroblasts as normal cells. average size of nanoparticles is 110 nm; magnetization at 1T and coercivity is 43.1 emu/g and 8.1, respectively; the amount of B is 0.077 mg/g and the amount of Gd is 0.632 mg/g. Successful immobilization of NCT agents, their low cytotoxicity against normal cells and selective cytotoxicity against cancer cells as well as the superparamagnetic properties of nanocarriers were confirmed by analyses above.

Super Magnetic Niosomal Nanocarrier as a New Approach for Treatment of Breast Cancer: A Case Study on SK-BR-3 and MDA-MB-231 Cell Lines

In the present study, a magnetic niosomal nanocarrier for co-delivery of curcumin and letrozole into breast cancer cells has been designed. The magnetic NiCoFe2O4 core was coated by a thin layer of silica, followed by a niosomal structure, allowing us to load letrozole and curcumin into the silica layer and niosomal layer, respectively, and investigate their synergic effects on breast cancer cells. Furthermore, the nanocarriers demonstrated a pH-dependent release due to the niosomal structure at their outer layer, which is a promising behavior for cancer treatment. Additionally, cellular assays revealed that the nanocarriers had low cellular uptake in the case of non-tumorigenic cells (i.e., MCF-10A) and related high viability but high cellular uptake in cancer cell lines (i.e., MDA-MB-231 and SK-BR-3) and related low viability, which is evidenced in their high cytotoxicity against different breast cancer cell lines. The cytotoxicity of the letrozole/curcumin co-loaded nanocarrier is higher than that of the aqueous solutions of both drugs, indicating their enhanced cellular uptake in their encapsulated states. In particular, NiCoFe2O4@L-Silica-L@C-Niosome showed the highest cytotoxicity effects on MDA-MB-231 and SK-BR-3 breast cancer cells. The observed cytotoxicity was due to regulation of the expression levels of the studied genes in breast cancer cells, where downregulation was observed for the Bcl-2, MMP 2, MMP 9, cyclin D, and cyclin E genes while upregulation of the expression of the Bax, caspase-3, and caspase-9 genes was observed. The flow cytometry results also revealed that NiCoFe2O4@L-Silica-L@C-Niosome enhanced the apoptosis rate in both MDA-MB-231 and SK-BR-3 cells compared to the control samples. The findings of our research show the potential of designing magnetic niosomal formulations for simultaneous targeted delivery of both hydrophobic and hydrophilic drugs into cancer cells in order to enhance their synergic chemotherapeutic effects. These results could open new avenues into the future of nanomedicine and the development of theranostic agents.

Novel Hybrid Compounds Containing Benzofuroxan and Aminothiazole Scaffolds: Synthesis and Evaluation of Their Anticancer Activity

A series of novel hybrid compounds containing benzofuroxan and 2-aminothiazole moieties are synthesized via aromatic nucleophilic substitution reaction. Possible reaction pathways have been considered quantum-chemically, which allowed us to suggest the most probable products. The quantum chemical results have been proved by X-ray data on one compound belonging to the synthesized series. It was shown that the introduction of substituents to both the thiazole and amine moieties of the compounds under study strongly influences their UV/Vis spectra. Initial substances and obtained hybrid compounds have been tested in vitro as anticancer agents. Target compounds showed selectivity towards M-HeLa tumor cell lines and were found to be more active than starting benzofuroxan and aminothiazoles. Furthermore, they are considerably less toxic to normal liver cells compared to Tamoxifen. The mechanism of action of the studied compounds can be associated with the induction of apoptosis, which proceeds along the mitochondrial pathway. Thus, new hybrids of benzofuroxan are promising candidates for further development as anticancer agents.

Bioinspired Gold Nanoparticle Synthesis Using Terminalia bellerica Fruit Parts and Exploring Their Anti-bacterial Potency In Vitro

Gold nanoparticles with their excellent biocompatibility are extensively used in pharma and biological applications. Terminalia bellerica (TB) dry fruit parts mediated gold nanoparticles were synthesized using the aqueous extracts. The secondary metabolites screening of the aqueous extracts was done using phytochemical analysis. The green synthesized gold nanoparticles show vibrant colours. They were characterized using UV-Visible spectroscopy, FT-IR spectroscopy, XRD analysis and FE-SEM. The analytical characterization methods ensured the formation of nanoparticles and could predict the nanometric size of the nanoparticles. The study also lay to determine the antibacterial potential of the TB fruit parts and TB fruit parts mediated gold nanoparticles. The pathogens chosen for the study were pathogens from clinical species such as Acinetobacter pneumonia, Bacillus subtilis, and Enterococcus faecalis which cause common infections. The TB fruit part extracts, as well as TB fruit parts mediated gold nanoparticles were capable enough to destroy clinical pathogens.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12088-021-00937-3.

Gold nanoparticles synergize with bacterial lipopolysaccharide to enhance class A scavenger receptor dependent particle uptake in neutrophils and augment neutrophil extracellular traps formation

Gold nanoparticles (AuNPs) are extensively utilized in biomedical fields. However, their potential interaction with host cells has not been comprehensively elucidated. In this study, we demonstrated a size-dependent effect of AuNPs to synergize with bacterial lipopolysaccharide (LPS) in promoting neutrophil extracellular traps (NETs) release in human peripheral neutrophils. Mechanistically, LPS was more efficient to contact with 10 nm AuNPs and promote their uptake in neutrophils compared to 40 and 100 nm AuNPs, leading to a synergistic upregulation of class A scavenger receptor (SRA) which mediated AuNPs uptake and triggered activation of extracellular regulated protein kinase (ERK) and p38. Blocking SRA or inhibiting ERK and p38 activation remarkably abrogated the effect of AuNPs and LPS to induce NETs formation. Further experiments demonstrated that AuNPs and LPS augmented the production of cytosolic reactive oxygen species (ROS) in p38 and ERK dependent manner, through upregulating and activating NADPH oxidase 2 (NOX2). Accordingly, scavenging of ROS or inhibiting the NOX2 dampened NETs release induced by combined AuNPs and LPS treatment. AuNPs and LPS also synergized to upregulate reactive oxygen species modulator 1 (ROMO1) via activating ERK, thereby increasing mitochondrial ROS generation and promoting the release of NETs. In summary, we provide new evidences about the synergy of AuNPs and LPS to augment cellular responses in neutrophils, which implicates the need to consider the amplifying effect by pathogenic stimuli when utilizing nanomaterials in infectious or inflammatory conditions.

Functionalized Reduced Graphene Oxide as a Versatile Tool for Cancer Therapy

Cancer is one of the deadliest diseases in human history with extremely poor prognosis. Although many traditional therapeutic modalities-such as surgery, chemotherapy, and radiation therapy-have proved to be successful in inhibiting the growth of tumor cells, their side effects may vastly limited the actual benefits and patient acceptance. In this context, a nanomedicine approach for cancer therapy using functionalized nanomaterial has been gaining ground recently. Considering the ability to carry various anticancer drugs and to act as a photothermal agent, the use of carbon-based nanomaterials for cancer therapy has advanced rapidly. Within those nanomaterials, reduced graphene oxide (rGO), a graphene family 2D carbon nanomaterial, emerged as a good candidate for cancer photothermal therapy due to its excellent photothermal conversion in the near infrared range, large specific surface area for drug loading, as well as functional groups for functionalization with molecules such as photosensitizers, siRNA, ligands, etc. By unique design, multifunctional nanosystems could be designed based on rGO, which are endowed with promising temperature/pH-dependent drug/gene delivery abilities for multimodal cancer therapy. This could be further augmented by additional advantages offered by functionalized rGO, such as high biocompatibility, targeted delivery, and enhanced photothermal effects. Herewith, we first provide an overview of the most effective reducing agents for rGO synthesis via chemical reduction. This was followed by in-depth review of application of functionalized rGO in different cancer treatment modalities such as chemotherapy, photothermal therapy and/or photodynamic therapy, gene therapy, chemotherapy/phototherapy, and photothermal/immunotherapy.

Photothermally Active Cryogel Devices for Effective Release of Antimicrobial Peptides: On-Demand Treatment of Infections

There has been significant interest in the use of peptides as antimicrobial agents, and peptide containing hydrogels have been proposed as biological scaffolds for various applications. Limited stability and rapid clearance of small molecular weight peptides pose challenges to their widespread implementation. As a common approach, antibacterial peptides are physically loaded into hydrogel scaffolds, which leads to continuous release through the passive mode with spatial control but provides limited control over drug dosage. Although utilization of peptide covalent linkage onto hydrogels addresses partially this problem, the peptide release is commonly too slow. To alleviate these challenges, in this work, maleimide-modified antimicrobial peptides are covalently conjugated onto furan-based cryogel (CG) scaffolds via the Diels-Alder cycloaddition at room temperature. The furan group offers a handle for specific loading of the peptides, thus minimizing passive and burst drug release. The porous nature of the CG matrix provides rapid loading and release of therapeutic peptides, apart from high water uptake. Interfacing the peptide adduct containing a CG matrix with a reduced graphene oxide-modified Kapton substrate allows "on-demand" photothermal heating upon near-infrared (NIR) irradiation. A fabricated photothermal device enables tunable and efficient peptide release through NIR exposure to kill bacteria. Apart from spatial confinement offered by this CG-based bandage, the selective ablation of planktonic Staphylococcus aureus is demonstrated. It can be envisioned that this modular "on-demand" peptide-releasing device can be also employed for other topical applications by appropriate choice of therapeutic peptides.

3D matrixed DNA self-nanocatalyzer as electrochemical sensitizers for ultrasensitive investigation of DNA 5-methylcytosine

DNA methylation plays an important role in a variety of human diseases. Thus, accurately analyze 5-methylcytosine in different DNA segments is of great significance. Herein, we proposed a novel 3D matrixed DNA self-nanocatalyzer via gold nanoparticles (AuNPs) supporting DNA self-hybridization with hemin as biomimetic enzyme and methylene blue (MB) as electrochemical mediator, which was employed as an efficient electrochemical sensitizer for the ultrasensitive bioassay of DNA 5-methylcytosine. Meanwhile, the AuNPs, graphitic carbon nitride (g-C₃N₄) and reduced graphene oxide (rGO) was prepared as AuNPs/g-C₃N₄@rGO nanocomposites to coat on the electrode surface to immobilize the capture hairpin DNA (CH). In the presence of target DNA with 5-methylcytosine, the target DNA could hybridize with CH via the hyperstable triple-helix formation. Based on the specific biorecognition between biotin and streptavidin and immune recognition between anti-5-methylcytosine antibodies and 5-methylcytosine sites on the target DNA, the 3D matrixed DNA self-nanocatalyzer could be captured onto the electrode surface to generate an amplified electrochemical signal related to the concentration of 5-methylcytosine. Under the optimal conditions, the proposed strategy performed a linear range from 10^-17 M to 10^-8 M with a detection limit of 8.6 aM. Remarkably, this strategy could be expanded easily to various biomarkers, including protein, DNA, phosphorylation and glycosylation, providing a promising strategy for clinical diagnosis and mechanism investigation of various diseases.

Pulsed laser synthesis of reduced graphene oxide supported ZnO/Au nanostructures in liquid with enhanced solar light photocatalytic activity

ZnO/Au/rGO ternary nanocomposites possessing a high photocatalytic response under solar irradiation were synthesized by a two-step process via a pulsed laser synthesis and a wet chemical process. The crystalline structure, surface morphology, size distribution, elemental composition, and optical properties of the prepared ZnO/Au/rGO ternary nanocomposites were characterized using X-ray diffraction, field-emission scanning electron microscope, high-resolution transmission electron microscope, energy-dispersive X-ray spectroscopy, UV-vis diffuse reflectance spectra, and photoluminescence analysis. The photocatalytic activity of the as synthesized nanocomposites was evaluated for the degradation of methylene blue (MB) under solar light irradiation (SLI). The density of the elemental and carbonaceous components, such as the Au nanoparticles (NPs) and the rGO nano-matrix on ZnO, could be altered by changing the concentration of HAuCl₄.3H₂O (5, 10, 15, and 20 wt%) or rGO (2.5, 5, and 7.5 wt%) using the same synthetic processes. The ZnO/Au15/rGO5 nanocomposite showed the highest photocatalytic degradation efficiency of 95% MB after 120 min under SLI, potentially due to the increased absorption of solar light or the efficient separation and migration of charge carriers by the anchored Au NPs and rGO onto the ZnO NPs. Further, the observed results and reusability of ZnO/Au15/rGO5 makes it an exceptionally promising material for diverse applications in the field of wastewater treatment and other types of environmental remediation.

Clinical Application for Screening Down's Syndrome by Using Carboxylated Graphene Oxide-Based Surface Plasmon Resonance Aptasensors

BACKGROUND

Advanced medical detection technology requires high sensitivity and accuracy to increase the disease detection rate. We showed that carboxyl-functionalized graphene oxide (carboxyl-GO) biosensing materials are capable of accurate detection.

METHODS

We developed a carboxylated GO-based surface plasmon resonance (SPR) aptasensor suitable for screening Down's syndrome in clinical serum. This biosensing material could rapidly and accurately detect hCG protein with a low concentration to identify fetal Down's syndrome. The developed carboxyl-GO-based SPR aptasensor showed excellent sensitivity and limit of detection without the use of antibodies and without any specific preference.

RESULTS

hCG protein detection limits of 1 pM in buffer samples and 1.9 pM in clinical serum samples were achieved. The results showed that the carboxyl-GO-based chip could detect hCG well below the normal physiological level of serum protein (5.0 mIU/mL). High affinity, sensitivity, and better detection limit were obtained in the range of 1.9 pM to 135 pM. The results showed a 5k-fold dilution factor, and that an SPR angle shift of more than 20 millidegrees (mo) was associated with a significant risk of fetal Down's syndrome compared to normal pregnant women. The results clearly showed that the detection of hCG protein in serum samples from pregnant women at 12-19 weeks could be used to screen Down's syndrome with high selectivity and sensitivity.

CONCLUSION

Our findings suggest the potential application of carboxyl-GO film in proof-of-concept studies for serum assays as a new type of SPR material. In addition, peptide and carboxyl-GO films may be conducive to the development of future point of care testing and rapid diagnostic devices for other diseases such as cancer.

Microplasma assisted synthesis of gold nanoparticle/graphene oxide nanocomposites and their potential application in SERS sensing

This is the first study on the deployment of direct current atmospheric pressure microplasma technique for the single step synthesis of gold nanoparticle/graphene oxide (AuNP/GO) nanocomposites. The nanocomposites were characterized using ultraviolet-visible spectroscopy (UV-vis), x-ray diffraction and x-ray photoelectron spectroscopy and their formation mechanisms have been discussed in detail. Our AuNP/GO nanocomposites are highly biocompatible and have demonstrated surface enhanced Raman scattering (SERS) properties as compared to pure AuNPs and pure GO. Their potential as SERS substrate has been further demonstrated using probe molecules (methylene blue) at different concentrations.

Radiation Enhancement by Graphene Oxide on Microelectromechanical System Emitters for Highly Selective Gas Sensing

Infrared gas sensors have been proven promising for broad applications in Internet of Things and Industrial Internet of Things. However, the lack of miniaturized light sources with good compatibility and tunable spectral features hinders their widespread utilization. Herein, a strategy is proposed to increase the radiated power from microelectromechanical-based thermal emitters by coating with graphene oxide (GO). The radiation can be substantially enhanced, which partially stems from the high emissivity of GO coating demonstrated by spectroscopic methods. Moreover, the sp² structure within GO may induce plasmons and thus couple with photons to produce blackbody radiation and/or new thermal emission sources. As a proof-of-concept demonstration, the GO-coated emitter is integrated into a multifunctional monitoring platform and evaluated for gas detection. The platform exhibits sensitive and highly selective detection toward CO₂ at room temperature with a detection limit of 50 ppm and short response/recovery time, outperforming the state-of-the-art gas sensors. This study demonstrates the emission tailorability of thermal emitters and the feasibility of improving the associated gas sensing property, offering perspectives for designing and fabricating high-end optical sensors with cost-effectiveness and superior performance.

Studying absorbance properties and mercury remediation capabilities of gold-graphene oxide-iron oxide (Au-GO-Fe3O4) nanoparticle systems

Mercury pollution is a rampant problem in many economically significant Philippine freshwater ecosystems. Communities dependent on these freshwater sources are therefore at risk for exposure to harmful levels of mercury. Various formulations of a novel gold-graphene oxide-iron oxide (Au-GO-Fe₃O₄) hybrid nanoparticle system were created and subjected to UV-Vis spectroscopy to determine optimal formulations that would best serve as potential substrates for Surface-Enhanced Raman Spectroscopy (SERS) detection of mercury. Optimal formulations of Au-GO-Fe₃O₄ were also introduced into mercury-polluted environments to evaluate its ability to remove mercury from both water and biological tissues. Spectroscopic analysis revealed that Fe₃O₄-rich formulations of Au-GO-Fe₃O₄ had the greatest potential to boost Raman signal intensities of mercury due to red shifting of absorbance peaks and overall increased absorbance across visible wavelengths resulting in the inclusion of greater areas underneath absorbance peaks. Mercury remediation experiments likewise demonstrated Au-GO-Fe₃O₄ to significantly reduce average concentrations of mercury from 1.67 to 0.82 ppm in polluted water samples - corresponding to a mercury removal efficiency of 50.9% and a mercury adsorption capacity of 5.89 mg/g. The results highlight the viability of Au-GO-Fe₃O₄ to function as both substrate for SERS detection of mercury and as effective adsorbent for mercury remediation.

Flower Shaped Gold Nanoparticles: Biogenic Synthesis Strategies and Characterization

Microbes can serve as mediators for the fabrication of complicated nano-structures, obviating the tedious and time-consuming methods of synthesis. The shape of a nanoparticle has a very prominent role in defining the functionality in prospective arenas. So, the flower shaped nanoparticles are in focus nowadays due to their enhanced electrocatalytic and optical properties as compared to the spherical ones. We present the biosynthesis of flower shaped gold nanoparticles by Bacillus subtilis RSB64 and process parameters optimization using central composite design. The two well-separated scattering spectra showing absorption peaks at 540 nm and 750 nm indicate the presence of anisotropic gold nanoparticles and the results were corroborated by transmission electron microscopy analysis. The presence of gold nanoparticles was further confirmed by energy dispersive X-ray studies. The functional groups responsible for the stability of gold nanoparticles were predicted by Fourier transform infrared spectroscopy. The gold nanoparticles biosynthesis were collective effects of three experimental process parameters viz pH, temperature and precursor concentration. These three parameters were statistically optimized wherein pH 11.0, substrate concentration 1:1 (v/v) and temperature of 50 °C resulted in the synthesis of stable flower shaped gold nanoparticles of 50 nm size. The results indicated the tailored biosynthesis of gold nanoparticles with a flower like morphology by multi process parameter analysis to finalize robust conditions for the synthesis using B. subtilis RSB64. These gold nanoflowers demonstrate increased surface area efficiency/reactivity and could be employed for sustained and controlled delivery of drugs.

Two dimensional carbon based nanocomposites as multimodal therapeutic and diagnostic platform: A biomedical and toxicological perspective

Graphene based nanocomposites have revolutionized cancer treatment, diagnosis and imaging owing to its good compatibility, elegant flexibility, high surface area, low mass density along with excellent combined additive effect of graphene with other nanomaterials. This review inculcates the type of graphene based nanocomposites and their fabrication techniques to improve its properties as photothermal and theranostic platform. With decades' efforts, many significant breakthroughs in the method of synthesis and characterization in addition to various functionalization options of graphene based nanocomposite have paved a solid foundation for their potential applications in the cancer therapy. This work intends to provide a thorough, up-to-date holistic discussion on correlation of breakthroughs with their biomedical applications and illustrate how to utilize these breakthroughs to address long-standing challenges in the clinical translation of nanomedicines. This review also emphasizes on graphene based nanocomposites based toxicity concerns pertaining to delivery platforms.

Efficient electrochemical determination of p-aminophenol using a novel tricomponent graphene-based nanocomposite

Design and synthesis of a gold nanoparticle@dithiooxamide functionalized graphene (AuNP@DFG) nanocomposite is reported herein, which is employed for the electrochemical determination of p-aminophenol successfully.