Influence of environment on testing of hydraulic sealers

Assessment of a Light-Curable Hydrogel to Be Used for Root Canal Obturation

Root canal obturation involves filling of the chemomechanically prepared root canal space. Despite reduced microbial load, residual bacteria can still lead to reinfection and treatment failure. Currently, obturation techniques use a combination of gutta-percha and sealer, which requires the preparation of the root canal to specific sizes and tapers to enable the fitting of customized cones. This study aims to characterize the physical, chemical, and antimicrobial properties of a new light-curable injectable material (OdneFill, Switzerland) used to obturate the root canal. Odnefill and 2 root canal sealers (AH Plus and BioRoot RCS) were characterized by scanning electron microscopy (SEM) and energy-dispersive spectroscopy following exposure to chlorhexidine, sodium hypochlorite, and water. The flow, film thickness, radiopacity, solubility, and contact angle were evaluated. The susceptibility to microbial degradation was assessed by weight changes after contact with bacterial enzymes (lipase and cholesterol esterase). A multispecies biofilm composed of Streptococcus mutans, Enterococcus faecalis, Fusobacterium nucleatum, and Veillonella dispar was used to assess changes to the material microstructure (SEM). Further, bacterial viability in contact with the materials was evaluated using live/dead staining and confocal microscopy. A direct contact assay was carried out, and the utilization of the materials as a carbon source for the bacterial biofilm was also assessed. Statistical analysis was performed using 1-way analysis of variance and Tukey post hoc tests (P = 0.05). OdneFill was composed of an organic matrix with zirconium oxide filler. It exhibited comparable physical properties to AH Plus and BioRoot RCS and was stable in contact with irrigating solutions and with the bacterial enzymes (cholesterol esterase and lipase). Its antimicrobial characteristics were better than those of AH Plus when placed in contact with a multispecies biofilm. Based on the findings, OdneFill presents itself as suitable root canal-filling material and warrants further clinical investigation.

Calcium Silicate-Based Sealers: Apatite Deposition on Root Canal Dentin and pH Variation Analysis

OBJECTIVE

 This study analyzes the biomineralization potential of calcium silicate-based sealers Ceraseal (Meta Biomed Co., Cheongju, Korea) and AH Plus Bioceramic (Dentsply Sirona, United States), focusing on evaluating apatite deposition in root canal dentin and pH increases.

MATERIALS AND METHODS

 Calcium silicate-based sealers Ceraseal (Meta Biomed Co.) and AH Plus Bioceramic (Dentsply Sirona) were applied to the root canal dentin of premolars that had undergone root canal preparation procedures. This was followed by a 14-day immersion in phosphate-buffered saline (PBS). Biomineralization analysis was performed by analyzing the formation of the apatite layer after the 14-day immersion. The thickness of the apatite layer deposits was observed using a scanning electron microscope (SEM). Additionally, the sealers were placed in molds and submerged in PBS solution with pH measurements taken on days 0, 7, and 14 using a digital pH meter.

STATISTICAL ANALYSIS

 The average thickness of apatite deposition in the interfacial layer was analyzed using the Mann-Whitney's test. The pH value differences among the groups were analyzed using a one-way analysis of variance test, followed by a post hoc least significant difference.

RESULTS

 There were differences in the apatite deposition in the interfacial layer between Ceraseal and AH Plus Bioceramic within 14 days of observation. There was a significant difference (p < 0.05) between the pH values of Ceraseal and AH Plus Bioceramic at 7 and 14 days of observation. Ceraseal showed greater alkalizing activity compared with AH Plus Bioceramic.

CONCLUSION

 Calcium silicate-based sealer Ceraseal showed better biomineralization potential than AH Plus Bioceramic.

Biocompatibility, bioactivity, porosity, and sealer/dentin interface of bioceramic ready-to-use sealers using a dentin-tube model

This study evaluated the biocompatibility, bioactivity, porosity, and sealer/dentin interface of Sealer Plus BC (SP), Bio-C Sealer (BIOC), TotalFill BC Sealer (TF), and AH Plus (AHP). Dentin tubes filled with the sealers and empty tubes (control group) were implanted in the subcutaneous tissue of rats for different periods (n = 6 per group/period). Number of inflammatory cells (ICs), capsule thickness, von Kossa reaction, interleukin-6 (IL-6) and osteocalcin (OCN) were evaluated. Porosity and voids in the interface dentin/sealers were assessed by micro-computed tomography. The data were submitted to ANOVA/Tukey's tests (α = 0.05). Greater capsule thickness, ICs and IL-6 immunolabeling cells were observed in AHP. No significant difference in thickness of capsule, ICs, and IL-6- immunolabeling cells was detected between SP and TF, in all periods, and after 30 and 60 days between all groups. At 60 days all groups had reduction in capsule thickness, ICs and IL-6 immunolabeling cells. Von Kossa-positive and birefringent structures were observed in the capsules around the sealers. BIOC, SP, and TF exhibited OCN-immunolabeling cells. All sealers had porosity values below 5%, besides low and similar interface voids. BIOC, SP and TF are biocompatible, bioactive, and have low porosity and voids. The dentin-tube model used is an alternative for evaluating bioceramic materials.

Heat-Induced Changes in the Physical Properties of a New Premixed Calcium Silicate-Containing Root Canal Sealer: An In Vitro Study

This study aimed to examine how heating affects the physical properties of a newly developed premixed calcium silicate-containing sealer (AH Plus Bioceramic Sealer; AHB), in comparison with EndoSequence BC Sealer (ES), AH Plus Jet (AH), and Pulp Canal Sealer. The setting time, flow, and film thickness were tested with or without heating at 100 °C for 30 or 60 s, in accordance with ISO6876:2012 standards. Ultrastructural and elemental analyses were performed with scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). Data were analyzed using one-way analysis of variance (ANOVA) with a Tukey post hoc test (α = 0.05). All sealers exhibited significantly shorter setting time and flow after heating at 100 °C for 30 and 60 s (p < 0.05). After heating, AHB showed a significantly higher film thickness compared to that of the other materials (p < 0.05). None of the tested properties of heat-applied AHB and ES met ISO standards, except the setting time in ES. The SEM/EDS results for AHB and ES were not affected by heating. The detected changes in physical properties can negatively impact the performance of premixed calcium silicate-containing sealers, particularly AHB, when warm vertical compaction is employed.

Characterisation and evaluation of physical properties of AH-Plus sealer with and without the incorporation of petasin, pachymic acid, curcumin and shilajit-an invitro study

BACKGROUND

AH Plus, an epoxy resin-based sealer, is widely used in endodontic practice, owing to its good physical properties that confers longstanding dimensional stability and good adhesion to dentin. Nevertheless, its propensity to trigger inflammation, especially in its freshly mixed state, has been extensively documented. Phytochemicals such as Petasin, Pachymic acid, Curcumin, and Shilajit are known for their anti-inflammatory and analgesic effects. This study aimed to analyze and determine the effect of these natural products on the physical properties of AH Plus sealer when incorporated with the sealer.

METHODS

AH Plus (AHR) sealer was mixed with 10% petasin, 0.75% pachymic, 0.5% and 6%shilajit to obtain AHP, AHA, AHC and AHS in the ratio of 10:1 and 5:1 respectively. Five samples of each material were assessed for setting time, solubility, flow, and dimensional stability in accordance with the ISO 6876:2012 standardization. Sealers were characterized through scanning electron microscopy (SEM), X-ray energy dispersive spectroscopy, X-ray diffraction (XRD), and Fourier transform infrared (FTIR) spectroscopy. Statistical evaluation involved the Kolmogorov-Smirnov and Shapiro-Wilks tests for normality and the one-way ANOVA test for analysis.

RESULTS

In this investigation, the characterisation analysis revealed a relatively similar microstructure in all the experimental root canal sealers. All experimental groups, excluding the control group, exhibited an increase in flow ranging from 11.9 to 31.4% at a 10:1 ratio. Similarly, for the 5:1 ratio, the increase ranged from 12.02 to 31.83%. In terms of dimensional stability, all groups at the 10:1 ratio showed a decrease compared to the control group. The addition of natural agents to AHR in 10:1 ratio led to a reduction in setting time by 8.9-31.6%, and at a 5:1 ratio, the reduction ranged from 8.1 to 31.5%. However, regarding solubility, the addition of natural agents did not induce any significant alterations.

CONCLUSION

Based on the results of this study, it can be concluded that all tested root canal sealers exhibited properties that met the acceptable criteria outlined in the ISO 6876:2012 standardization.

Characterization and Assessment of Physical Properties of 3 Single Syringe Hydraulic Cement-based Sealers

INTRODUCTION

A number of sealers with different chemistries are badged as Bioceramic, implying biological activity, but have dissimilar properties, which has implications on the sealer properties and will affect the quality and outcome of root canal treatment. This study aimed to assess the physical and chemical properties of 3 hydraulic cement-based sealers, namely BC Universal sealer compared with Totalfill BC sealer and AH Plus Bioceramic.

METHODS

The microstructure and composition of the sealers were assessed using scanning electron microscopy and energy dispersive spectroscopy after setting. The crystalline phases were assessed by X-ray diffraction analysis and the leachates were tested using inductively coupled plasma. All testing was performed at 0, 7, and 28 days. The physical properties of film thickness, flow, radiopacity, and solubility were evaluated using ISO 6876:2012 standards.

RESULTS

All 3 sealers contained calcium, zirconium, and silicon. Totalfill BC had the highest calcium release at 7 and 28 days followed by AH Plus Bioceramic and BC Universal sealer. All 3 sealers adhered to the ISO standard in terms of flow and radiopacity. BC Universal sealer was slightly over the range (>50 μm) for film thickness. All sealers exceeded the solubility range set by ISO 6876:2012.

CONCLUSION

Although these hydraulic cement sealers had similar components and delivery, the properties varied significantly. The testing of material properties to confirm the suitability for clinical use is necessary.

Endodontic sealers after exposure to chlorhexidine digluconate: An assessment of physicochemical properties

OBJECTIVES

Final root canal irrigation should ideally maintain the physicochemical stability of root canal sealers. We seek to assess the effect of contact with 2% chlorhexidine digluconate (CHX) on the physicochemical properties of AH Plus, BioRoot™ RCS, and Pulp Canal Sealer (PCS).

METHODS

Mixed sealers were placed in cylindrical teflon molds and allowed to set for 1.5x the manufacturers' setting time. Half of the specimens had their free surface in contact with CHX for the first minute of their setting period. Solubility, radiopacity, surface roughness, microhardness and wettability of the sealers were assessed up to 28 days after setting. Elemental analysis of sealer surfaces and their leachates together with pH measurements were also performed. Appropriate parametric and non-parametric analysis with post hoc tests were performed (p < 0.05).

RESULTS

Exposure to CHX had no effect on solubility and radiopacity of all sealers. CHX altered the surface roughness of PCS and BioRoot RCS (p < 0.05). Contact with CHX reduced the microhardness of AH Plus and PCS (p < 0.05). AH Plus was more hydrophilic after CHX contact, whereas PCS became more hydrophobic (p < 0.05). AH Plus and PCS surfaces appeared to adsorb CHX as exhibited by chlorine peaks after contact with CHX. Sealer leachates' alkalinity was not affected. CHX increased elution of silicon and zirconium for BioRoot and zinc for PCS leachates.

SIGNIFICANCE

In our study, CHX affected sealers' physicochemical properties to various extents. Further studies are needed to confirm the obtained results by investigating various final irrigation strategies and correlating to biological properties.

Evaluation of Cytotoxicity, Cell Attachment, and Elemental Characterization of Three Calcium Silicate-Based Sealers

We investigated three calcium silicate-based sealers with respect to their chemical characterization, cytotoxicity, and attachment to RAW264.7 cells. BioRoot RCS (BR), Bio-C Sealer (BC), and Sealer Plus BC (SPBC) were assessed using Fourier transform infrared spectroscopy (FTIR), X-ray fluorescence spectroscopy (XRF), and energy-dispersive X-ray spectroscopy (EDX) (n = 4) for elemental characterization, and using scanning electron microscopy (SEM) to evaluate cell morphology and adhesion. Cytotoxicity was determined at different dilutions (1:1, 1:2, and 1:5) using the succinate dehydrogenase activity (MTT assay). Statistical analysis was performed for normal distribution using the Shapiro-Wilk test and for homoscedasticity using Levene's test, and one-way ANOVA, Tukey's/Dunnett's post hoc tests for cell viability and XRF (α = 0.05). Calcium silicate hydrate and calcium hydroxide were detected by FTIR in all groups. EDX detected a higher calcium content for BR and SPBC and aluminum only in the premixed sealers. XRF detected the highest calcium release in BR (p < 0.05). The surface morphology showed irregular precipitates for all the sealers. SPBC at a 1:2 dilution resulted in the lowest cell viability compared to BR (p < 0.05) and BC (p < 0.05). The calcium silicate-based sealers produced a statistically significant reduction in cellular viability at a 1:1 dilution compared to the control group (p < 0.0001). All the sealers maintained viability above 70%.

Thermal, chemical and physical analysis of VDW.1Seal, Fill Root ST, and ADseal root canal sealers

This study aimed to evaluate the thermal, chemical, and physical properties of VDW.1Seal, Fill Root ST, and ADseal sealers. Thermal properties were analyzed using Thermogravimetric analysis (TGA) and Differential thermal analysis (DTA). Attenuated total reflection Fourier Transform Infrared Spectroscopy (ATR-FTIR) analysis was performed as a complementary test to confirm TGA/DTA analysis. The chemical composition of the set sealer material was identified using an X-ray powder diffraction (XRD) system. Other physical properties of each sealer were investigated; ten specimens were used to measure the solubility (at 24 h and 28 days), and another ten specimens were used to assess pH changes and calcium ion release (after 7 and 14 days). Film thickness was done according to ISO 6876 specs. The data were analyzed using the two-way ANOVA test. Results showed that for all sealers, TGA analysis revealed a direct relationship between sealer mass loss and temperature rise. In addition, the decomposition of the tested sealers started at 145 °C, 135 °C and 91 °C for VDW.1Seal, ADseal sealer, and Fill Root ST, respectively. XRD analysis revealed a higher degree of crystallinity for VDW.1Seal and ADseal. ADseal showed the least solubility; VDW.1Seal exhibited the highest alkalinity, calcium ion release, and the lowest film thickness.

pH influences the volumetric change of calcium silicate- and epoxy resin-based root canal sealers: An ex vivo micro-CT study

This study assessed the influence of pH variation on the volumetric change of EndoSequence BC Sealer compared to AH Plus Jet. Eighteen single-rooted teeth were uniformly prepared and filled with one of the sealers. After 24-h storing, samples were scanned in a micro-CT device. Then, roots were immersed in 20 ml phosphate-buffered saline (PBS) with pH of 5, 7 or 12 at 37°C for 7 and 30 days and rescanned. Statistical analysis was performed using Shapiro-Wilk's test, one-way ANOVA and Tukey's or Student's t-tests (p < 0.05). Differences between sealers were observed only at neutral pH and after 30 days of acidic pH exposure, with a higher loss of EndoSequence (p < 0.05). After 7 days, alkaline pH reduced and increased the volumetric loss of EndoSequence and AH Plus, respectively, compared to neutral pH (p < 0.05). It can be concluded that the pH directly influenced the volumetric change of both tested root canal sealers in different ways.

Volumetric changes in root canal sealers in ex vivo and a novel animal model approach

AIM

This study aimed to evaluate the volumetric change of root canal sealers through micro-computed tomographic analysis using a novel in vivo model and to compare the results with those obtained using an ex vivo test.

METHODOLOGY

Eighteen single-rooted teeth were cut to 5 mm length from the root apex. The root canals were uniformly enlarged and filled with EndoSequence BC Sealer or AH Plus Jet root canal sealers. Samples were stored at 37°C and 95% relative humidity for 24 h and then scanned with a micro-CT device. Twelve samples (n = 6 for each sealer) were implanted in the subcutaneous tissue of Wistar rats, while six samples (n = 3 for each sealer) were immersed in 20 mL of phosphate-buffered saline (PBS) at 37°C at neutral pH. After 7 and 30 days, teeth were removed from subcutaneous tissue or PBS and rescanned. Statistical analysis of volume changes was performed using Shapiro-Wilk's test and independent t-test (p < .05).

RESULTS

AH Plus Jet had smaller volume changes (-2.2 to +0.77%) than EndoSequence BC Sealer (-2.0 to +4.0%) (p < .05), in the two tested models. The volume of the root canal sealers decreased over time (p < .05), in vivo. AH Plus Jet results varied between the in vivo and ex vivo results (p < .05), while EndoSequence BC Sealer presented similar volume losses for both experimental models (p > .05).

CONCLUSION

EndoSequence BC Sealer lost more volume than AH Plus Jet. The experimental conditions influenced the volumetric change of AH Plus Jet but not the EndoSequence BC Sealer. The ex vivo model should be further explored as a methodological alternative to assess the volumetric changes of root canal sealers without causing harm to animals.

A critical review of the material properties guiding the clinician's choice of root canal sealers

OBJECTIVES

The introduction of hydraulic cement sealers has increased the popularity of single cone obturation where the chemistry and properties of hydraulic cement sealers are crucial. This article has investigated the materials present on the market by reviewing the chemistry aiming at understanding whether these materials are optimized or have been tested appropriately.

METHODOLOGY

A market search on materials called bioceramic and hydraulic sealers was undertaken. The safety data sheet and manufacturer details for every material were searched and the components were checked. The literature was searched for information about the properties of these materials based on their composition.

RESULTS

The safety data sheets and manufacturer details were imprecise with some manufacturers providing little detail on composition. From the publications reviewed, it is apparent that the materials used clinically are not optimized, and there is little evidence that the material chemistry and presentation aid the clinical technique in any way.

CONCLUSIONS

There has been a rapid increase in materials identifying as bioceramics on the market. These materials have diverse chemistries, and some of the constituents are not declared. This may affect the clinical performance of these materials.

CLINICAL SIGNIFICANCE

Smart materials developed on the clinical need which are appropriately tested are necessary for a paradigm shift in root canal obturation. It is important to use reputable materials that have been adequately researched in clinical practice.

Comparison of obturation quality in natural and replica teeth root-filled using different sealers and techniques

OBJECTIVES

This study aims to assess the obturation efficacy of sealers placed with different techniques using microcomputed tomography (µCT) and assess the influence of µCT testing parameters on the obturation data obtained.

MATERIALS AND METHODS

Incisors and mesial roots of lower molars with standardized root length were scanned using µCT, and one tooth of each type was 3D printed in acrylic. Two obturation techniques (warm vertical and single cone) and 4 sealer types (AH Plus, BioRoot RCS, Totalfill BC, and Bio-C Sealers) were assessed following storage in Hank's balanced salt solution for 3 and 6 months by assessing gap and void volume percentages on both natural and replica incisor and molar roots. The storage solution was analysed to assess calcium ion leaching. The influence of temperature, tooth positioning, and moisture content of the teeth while µCT scanning was also investigated.

RESULTS

The obturation quality in the incisor group was the same using both natural teeth and replicas (p > 0.05). No changes in void volume were identified when comparing the same sealer using different obturation techniques. The premixed sealers used in single-cone obturation exhibited high void volume in the 3D printed replicas in the long term. The temperature, positioning, and moisture content of the teeth did not affect the outcome of µCT testing.

CONCLUSIONS

BioRoot RCS, Totalfill BC, and Bio-C Sealers are suitable for obturation of both complex and simple root canal systems using different obturation techniques with BioRoot RCS exhibiting the highest calcium ion release. 3D printed acrylic teeth can be used to assess the obturation quality in uncomplicated root canal systems. µCT parameters had no significant effect on the µCT measurement.

CLINICAL RELEVANCE

The single-cone obturation technique with hydraulic sealer is a simple technique that can be used for obturation of all root canal systems.

Sol-gel synthesis of lithium doped mesoporous bioactive glass nanoparticles and tricalcium silicate for restorative dentistry: Comparative investigation of physico-chemical structure, antibacterial susceptibility and biocompatibility

Introduction: The sol-gel method for production of mesoporous bioactive glass nanoparticles (MBGNs) has been adapted to synthesize tricalcium silicate (TCS) particles which, when formulated with other additives, form the gold standard for dentine-pulp complex regeneration. Comparison of TCS and MBGNs obtained by sol-gel method is critical considering the results of the first ever clinical trials of sol-gel BAG as pulpotomy materials in children. Moreover, although lithium (Li) based glass ceramics have been long used as dental prostheses materials, doping of Li ion into MBGNs for targeted dental applications is yet to be investigated. The fact that lithium chloride benefits pulp regeneration in vitro also makes this a worthwhile undertaking. Therefore, this study aimed to synthesize TCS and MBGNs doped with Li by sol-gel method, and perform comparative characterizations of the obtained particles.

Methods: TCS particles and MBGNs containing 0%, 5%, 10% and 20% Li were synthesized and particle morphology and chemical structure determined. Powder concentrations of 15mg/10 mL were incubated in artificial saliva (AS), Hank’s balanced saline solution (HBSS) and simulated body fluid (SBF), at 37°C for 28 days and pH evolution and apatite formation, monitored. Bactericidal effects against S. aureus and E. coli, as well as possible cytotoxicity against MG63 cells were also evaluated through turbidity measurements.

Results: MBGNs were confirmed to be mesoporous spheres ranging in size from 123 nm to 194 nm, while TCS formed irregular nano-structured agglomerates whose size was generally larger and variable. From ICP-OES data, extremely low Li ion incorporation into MBGNs was detected. All particles had an alkalinizing effect on all immersion media, but TCS elevated pH the most. SBF resulted in apatite formation for all particle types as early as 3 days, but TCS appears to be the only particle to form apatite in AS at a similar period. Although all particles had an effect on both bacteria, this was pronounced for undoped MBGNs. Whereas all particles are biocompatible, MBGNs showed better antimicrobial properties while TCS particles were associated with greater bioactivity.

Conclusion: Synergizing these effects in dental biomaterials may be a worthwhile undertaking and realistic data on bioactive compounds targeting dental application may be obtained by varying the immersion media.

Dimensional changes of endodontic sealers-An in vitro model simulating a clinical extrusion scenario during 18 months

OBJECTIVES

To examine the dimensional changes of endodontic sealers during 18 months using three-dimensional (3D) surface scanning and subtraction radiography in a novel in vitro sealer-extrusion model.

MATERIAL AND METHODS

Fifty endodontically instrumented acrylic teeth were randomly allocated to five groups (n = 10) filled with Apexit Plus, AH Plus, BioRoot RCS, TubliSeal EWT, and gutta-percha (control). Freshly mixed sealers were intentionally extruded during obturation. All teeth were immersed in a physiologic solution for up to 18 months. Blinded 3D surface scans (resolution: ~10 μm) and digital radiographs of the teeth were obtained at baseline (immediately after obturation); and then after 1 week, and at 1, 3, and 18 months. For blinded assessment of sealer dimensional change, 3D models and radiographs were superimposed using specific software. Volumetric differences, root mean square (RMS), and area change from subtraction radiography measured at each period within each sealer group were thereafter calculated. Repeated measures analyses were done with Bonferroni adjustment for multiple comparisons; standard errors, p values, and 95% confidence intervals (CI) were reported.

RESULTS

Analyses of the volumetric data confirmed significant, progressive material loss for Apexit Plus when compared to the other investigated sealers or the control group (p ≤ 0.02). Immersion period significantly influenced the volumetric dimensional changes of Apexit Plus already after 1 month (p < 0.01). For TubliSeal EW, the effect of the immersion period on the dimensional changes was noted after immersion for 3 months (p ≤ 0.02), while for BioRoot RCS this was evident only at 18 months (p < 0.01). Same trends were noted for the RMS data, whereas progressive dimensional changes using subtraction radiography only revealed significant changes for Apexit Plus (p = 0.01).

CONCLUSIONS

The largest dimensional changes were shown by Apexit Plus, followed by Tubliseal EWT and BioRoot RCS. AH Plus remained stable throughout 18 months.

Biocompatibility analysis in subcutaneous tissue and physico-chemical analysis of pre-mixed calcium silicate–based sealers

OBJECTIVES

To evaluate the biocompatibility, physical and chemical properties of three pre-mixed calcium silicate-based sealers and an epoxy resin-based material were assessed. Pre-mixed sealers supposedly obtain water from the root canal moist to hydrate and set.

MATERIALS AND METHODS

Polyethylene tubes were filled with the materials Bio-C Sealer Ion+, Bio-C Sealer, EndoSequence BC Sealer and AH Plus Jet, or left empty and surgically implanted in the subcutaneous tissue of Wistar rats. The animals were euthanised and the tubes and tissue were removed for histological analysis and scanning electron microscopy (SEM) coupled with energy-dispersive spectrometry (EDS). Materials' surface chemical characterisation was assessed using Raman spectroscopy and SEM/EDS. Flow, setting time (in two conditions), solubility, radiopacity and pH were also analysed. ANOVA and Bonferroni correction were performed for comparisons (P < 0.05).

RESULTS

Inflammatory response observed in the tissues subsided from 7 to 30 days. Tungsten migration could be detected in the surrounding tissue following AH Plus Jet implantation. All calcium silicate-based sealers exhibited zirconium oxide (radiopacifier) and tricalcium silicate peaks before and after implantation. All materials exhibited flow values above 17 mm. An approximately tenfold difference was observed between the plaster- and metal-mould setting times of the calcium silicate cements indicating its sensitivity to moist variations and solubility above 8% was also observed for these materials.

CONCLUSIONS

Pre-mixed materials exhibited variable setting time and solubility with a decreasing inflammatory response.

CLINICAL RELEVANCE

The variable moist-dependant setting time with high solubility poses a concern for the clinical use of these pre-mixed sealers.

Short and Long-Term Solubility, Alkalizing Effect, and Thermal Persistence of Premixed Calcium Silicate-Based Sealers: AH Plus Bioceramic Sealer vs. Total Fill BC Sealer

This study aimed to investigate the short- and long-term solubility, alkalizing potential, and suitability for warm-vertical compaction of AH Plus Bioceramic Sealer (AHBC), and Total Fill BC Sealer (TFBC) compared to the epoxy-resin sealer AH Plus (AHP). A solubility test was performed according to ISO specification 6876 and further similar to ISO requirements over a period of 1 month in distilled water (AD) and 4 months in phosphate-buffered saline (PBS). The pH of the immersion solution was determined weekly. Sealers were exposed to thermal treatment at 37, 57, 67, and 97 °C for 30 s. Furthermore, heat treatment at 97 °C was performed for 180 s to simulate inappropriate implementation of warm vertical filling techniques. Physical properties (setting time, flow, film thickness according to ISO 6876) and chemical properties (Fourier transformed infrared spectroscopy) were assessed. AHBC and TFBC were associated with significantly higher solubility than AHP over 1 month in AD and 4 months in PBS (p < 0.05). AHBC and TFBC both reached high initial alkaline pH, while TFBC was associated with a longer-lasting alkaline potential than AHBC. Initial pH of AHBC and TFBC was higher in AD than in PBS. None of the sealers were compromised by thermal treatment.

Surface characteristics and bacterial adhesion of endodontic cements

OBJECTIVES

To investigate the effect of inclusion of silver nano-particles (SNP) or bioactive glass (BG) on the surface characteristics and bacterial adhesion of prototype tricalcium silicate (TCS)-based cements alongside two commercial cements, under different aging periods and exposure conditions.

MATERIALS AND METHODS

A basic formulation of radio-opacified TCS without (TZ-base) and with additions of SNP (0.5, 1, or 2 mg/ml) or BG (10 or 20%) was used. Biodentine and intermediate restorative material (IRM) served as reference materials. Material disks were immersed in ultrapure water or fetal bovine serum (FBS) for 1, 7, or 28 days. Surface roughness (n = 3), microhardness (n = 9), and wettability (n = 6) were analyzed by standard procedures. Adhesion of Enterococcus faecalis was assessed by fluorescence microscopy (n = 5). Data from these assays were evaluated for normality and comparisons among groups were conducted with statistical procedures (p < 0.05 for significance).

RESULTS

The surface morphology of SNP- and BG-containing cements had higher roughness values than TZ-base after 28 days (p < 0.05). No differences in microhardness were observed among prototype cements (p > 0.05). Biodentine presented smooth surface characteristics and the highest hardness values (p < 0.05). The FBS-immersion resulted in surface reactions in prototype materials and Biodentine, depicted with scanning electron microscopy. All 1- and 7-day prototype cements showed negligible bacterial adhesion, while in Biodentine and IRM, noticeable E. faecalis adherence was observed from day 1 (p < 0.05).

CONCLUSIONS

Incorporation of SNP or BG did not improve the antibacterial effect of the experimental cement; all 28-day aged materials failed to inhibit bacterial adherence. The measured physical parameters did not appear to be related to the degree of bacterial adhesion. Exposure of TCS-based cements in FBS resulted in surface reactions, which did not affect bacterial adhesion.

CLINICAL RELEVANCE

Changes in the surface characteristics of prototype TCS-based cements by inclusion of SNP and BG or exposure to different environments did not affect bacterial adhesion. All experimental materials showed inferior physical properties and higher antibacterial effect than Biodentine.

Impact of dentin conditioning and sealer modification with chitosan-hydroxyapatite nanocomplexes on the antibacterial and mechanical characteristics of root dentin

INTRODUCTION

This study aimed to characterize the effectiveness of dentin-conditioning with bio-mineralizable chitosan-hydroxyapatite precursor (CS-HA) nanocomplexes alone or associated with tricalcium silicate sealer (TCS/CS-HA) on the mechanical property and antibiofilm efficacy in root dentin.

METHODS

Flow tests were performed following ISO6876:2012-specifications. Solubility was measured. Micromorphology was assessed using Scanning Electron Microscopy (SEM). Nanohardness/elastic modulus were also determined. Fracture resistance was determined on lower premolars that were prepared, and randomly distributed among 7-groups (n=8/group), including the control, CS-HA dentin-conditioning and root canal filled groups. Similar canal preparation/distribution procedure was followed to test the antibacterial effect on Enterococcus faecalis-infected roots. Descriptive statistic was used to report SEM findings. Flowability results were analyzed using Paired t-test. Multiple comparisons from solubility, fracture and antibacterial assays were assessed by one-way ANOVA-Tukey's tests.

RESULTS

TCS/CS-HA showed optimal flow and no effect on solubility after immersion for 4 weeks (p>.05). TCS/CS-HA significantly increased nanohardness and elastic modulus (210±11.3MPa, 7.9±0.9GPa) compared to TCS (44.5±7.8MPa, 2.1±0.3GPa,p<.05). SEM revealed needle-shaped mineralized structures resulting in fewer voids and a well-adapted sealer-dentin interface in the TCS/CS-HA groups. NaOCl-EDTA irrigation resulted in reduced fracture resistance (444.34N) while CS-HA dentin-conditioning alone (928.28N, p<.05) and CS-HA dentin-conditioning plus CS-HA/TCS resulted in higher fracture resistance (1134.06N, p<.05). CS-HA dentin-conditioning also reduced bacteria by 2.04 log (4.50±0.43) from the initial bacterial load (6.54±0.07, p<.05). There was further bacterial reduction when CS-HA-conditioned root canals were filled with TCS or TCS/CS-HA (0.00 to 0.98±0.57, p>.05).

CONCLUSION

Dentin modification with CS-HA increased the fracture resistance of root dentin, and decreased the residual bacterial burden. TCS/CS-HA potentiated the nanomechanical and physical properties of TCS.

Physicochemical properties and osteoclastogenesis for three premixed calcium silicate-based sealers post set

Solubility, pH, ion release, cytotoxicity, and osteoclastogenesis inhibition in bone marrow-derived monocyte macrophages (BMMs) were evaluated in EndoSequence BC Sealer (END), Bio-C Sealer (BC), and Sealer Plus BC (SPBC). pH was determined after immersion of the sealers in deionized water (DW) and Minimum Essential Medium Alpha (α-MEM). Solubility was obtained by mass loss. Ion release was measured by using X-ray fluorescence spectroscopy (XRF). Cytotoxicity was evaluated by MTT assay. Inhibition of osteoclastogenesis was evaluated by tartrate-resistant acid phosphatase (TRAP). Data were analyzed using the t-test, ANOVA and Tukey/Dunnett's post-hoc tests (α = 0.05). END had the highest pH in DW (p < 0.05), and BC, in α-MEM (p < 0.05). Solubility in DW was the lowest for SPBC (p < 0.005). The highest calcium release was observed for BC in DW at 12 h (p < 0.05), and in α-MEM at 12 and 24 h (p < 0.05). The lowest toxicity was detected for END (p < 0.05). BC had the highest inhibitory effect on osteoclasts (p < 0.05). Overall, the highest solubility and pH values were found in DW. However, the calcium silicate-based sealer showed higher solubility than the ISO standards. Calcium release was the highest for BC. END showed the highest cell viability, and BC, the highest osteoclast inhibition.

Methods for testing solubility of hydraulic calcium silicate cements for root-end filling

Regulatory testing of hydraulic cements used in dentistry and standard test methods for root-end filling materials do not exist. The aim of this study was to identify a simple, reproducible method for testing the solubility of materials that set with water (hydraulic) used as root-end filling materials in dentistry. Commercial and prototype hydraulic cements were characterized by scanning electron microscopy and X-ray diffraction analyses and their solubilities were determined using ISO 6876; 2012 standard, a modified ISO 6876 method with media alternative to water and a new method measuring the percentage mass loss and volume change of materials (micro-CT method) from a single surface exposed to three solutions. The solubility testing was performed by three operators to enable an intra-laboratory comparison. The solubility data obtained from the two commercial and two prototype materials varied depending on the method used, with the ISO 6876 method identifying differences in solubility of the materials (p < 0.05) but when modified with alternative solutions, no differences were found (p > 0.05). The changes in solution thus effected the solubility of the tested materials. Inter-operator differences were observed with the weight changes determined from the new method indicating this method was not robust. The weight and volume assessments using the new method were not solution-dependent. The advantage of the proposed method compared with the ISO standard is its simplicity, enabling a number of tests to be performed on the same set of samples that also more closely mimics the clinical environment.

Present status and future directions: Hydraulic materials for endodontic use

BACKGROUND

Hydraulic materials are used in Endodontics due to their hydration characteristics namely the formation of calcium hydroxide when mixing with water and also because of their hydraulic properties. These materials are presented in various consistencies and delivery methods. They are composed primarily of tricalcium and dicalcium silicate, and also include a radiopacifier, additives and an aqueous or a non-aqueous vehicle. Only materials whose primary reaction is with water can be classified as hydraulic.

OBJECTIVES

Review of the classification of hydraulic materials by Camilleri and the literature pertaining to specific uses of hydraulic cements in endodontics namely intra-coronal, intra-radicular and extra-radicular. Review of the literature on the material properties linked to specific uses providing the current status of these materials after which future trends and gaps in knowledge could be identified.

METHODS

The literature was reviewed using PUBMED, and for each clinical use, the in vitro properties such as physical, chemical, biological and antimicrobial characteristics and clinical data were extracted and evaluated.

RESULTS

A large number of publications were retrieved for each clinical use and these were grouped depending on the property type being investigated.

CONCLUSIONS

The hydraulic cements have made a difference in clinical outcomes. The main shortcoming is the poor testing methodologies employed which provide very limited information and also inhibits adequate clinical translation. Furthermore, the clinical protocols need to be updated to enable the materials to be employed effectively.

Effect of chlorhexidine digluconate on antimicrobial activity, cell viability and physicochemical properties of three endodontic sealers

OBJECTIVE

Assess the biological and physicochemical properties of AH Plus, BioRoot RCS and Pulp Canal Sealer (PCS) leachates with and without chlorhexidine (CHX).

METHODS

The sealers were studied in no contact and 1-minute contact with CHX. For biological properties (antibacterial activity and cytotoxicity), leachates were formed in saline of freshly mixed, 1-, 7- and 28 days set sealers. The antibacterial properties of sealer leachates were investigated for planktonic and biofilm growth of E. faecalis, S. mutans, S.epidermidis and S.aureus. The 3-(4,5 dimethylthiazolyl-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay was used to evaluate murine fibroblast cell viability after exposure to the leachates. The physical properties (water uptake, sorption, solubility, porosity, surface characteristics) of sealers and the pH of the immersion liquid (saline or distilled water) were also assessed over a 28-days period.

RESULTS

CHX improved the antibacterial properties of the sealer leachates and reduced cell viability for all sealer leachates, except for freshly mixed PCS. BioRoot RCS leachates presented the highest antibacterial properties and cell viability with and without CHX contact. PCS was the material most affected by CHX in terms of physical properties, whereas for AH Plus, solubility was increased. CHX did not affect the physical properties of BioRoot RCS, except for solubility that was decreased. CHX contact did not change sealers' alkalinity in distilled water whereas it increased it for AH Plus and BioRoot RCS in saline.

SIGNIFICANCE

CHX improved the antibacterial efficacy of sealer leachates and either compromised or did not affect cell viability. CHX affected to various extent sealers' physicochemical properties.

In vitroandin vivocharacterization of a novel tricalcium silicate-based ink for bone regeneration using laser-assisted bioprinting

Grafts aside, current strategies employed to overcome bone loss still fail to reproduce native tissue physiology. Among the emerging bioprinting strategies, Laser-Assisted Bioprinting (LAB) offers very high resolution, allowing designing micrometric patterns in a contactless manner, providing a reproducible tool to test ink formulation. To this date, no LAB associated ink succeeded to provide a reproducible ad integrum bone regeneration on a murine calvaria critical size defect model. Using the CE approved BioRoot RCS® as a mineral addition to a collagen-enriched ink compatible with LAB, the present study describes the process of the development of a solidifying tricalcium silicate-based ink as a new bone repair promoting substrates in a LAB model. This ink formulation was mechanically characterized by rheology to adjust it for LAB. Printed aside Stromal Cells from Apical Papilla (SCAPs), this ink demonstrated a great cytocompatibility, with significant in vitro positive impact upon cell motility, and an early osteogenic differentiation response in the absence of another stimulus. Results indicated that the in vivo application of this new ink formulation to regenerate critical size bone defect tends to promote the formation of bone volume fraction without affecting the vascularization of the neo-formed tissue. The use of LAB techniques with this ink failed to demonstrate a complete bone repair, whether SCAPs were printed or not of at its direct proximity. The relevance of the properties of this specific ink formulation would therefore rely on the quantity applied in situ as a defect filler rather than its cell modulation properties observed in vitro. For the first time, a tricalcium silicate-based printed ink, based on rheological analysis, was characterized in vitro and in vivo, giving valuable information to reach complete bone regeneration through formulation updates. This LAB-based process could be generalized to normalize the characterization of candidate ink for bone regeneration.

The dentine-sealer interface: modulation of antimicrobial effects by irrigation

AIM

Assess whether sodium hypochlorite (NaOCl) or chlorhexidine (CHX) and two irrigation protocols may alter the antibacterial properties of dentine and three endodontic sealers using a novel ex vivo tooth model.

METHODOLOGY

Prior to antibacterial testing, the tooth model was validated by means of scanning electron microscopy (SEM) to evaluate the separation between dentine and sealer surfaces. Root blocks prepared from extracted human roots were pretreated with 17% EDTA + 0.9% saline and subsequently treated with 1% NaOCl (G1), 2% CHX (G2) or no irrigant (G3). Two irrigation protocols were further investigated, "1% NaOCl + 17% EDTA" (P1) and "1% NaOCl + 17% EDTA + 2% CHX" (P2). Following irrigation, the root blocks were either filled with AH Plus, BioRoot RCS and Pulp Canal Sealer (PCS), or left empty. All groups were incubated for 1, 7 and 28 days. Direct contact tests for planktonic E. faecalis and 48 hours E. faecalis biofilms were performed at the level of dentine and sealer surfaces. Statistical analysis was performed on the bacterial survival between irrigants (G1, G2 and G3) and between irrigation protocols (P1 and P2) (p<0.05).

RESULTS

The model was considered reproducible as SEM examination of dentine samples indicated consistent separation between dentine and sealer surfaces. Irrigation with CHX (G2) and irrigation protocol (P2) enhanced the antibacterial properties of dentine without sealer application as well as dentine in contact with all three sealers tested, especially against planktonic E. faecalis. G2 and P2 also improved the antibacterial effect of AH Plus surfaces for all three incubation times. No irrigation groups (G1, G2) or irrigation protocols (P1, P2) altered the antibacterial properties of BioRoot RCS surfaces against planktonic bacteria or biofilms. Only BioRoot RCS surfaces eliminated the planktonic E. faecalis in all irrigation groups (G1, G2, G3) and protocols (P1, P2) investigated while PCS surfaces eliminated E. faecalis in biofilms in all groups up to 7 days.

CONCLUSIONS

The tooth model was reproducible. CHX improved the antibacterial activity upon both sealer and dentine surfaces. Among sealers, BioRoot RCS was less affected by NaOCl and CHX, and exhibited high antibacterial properties regardless the irrigation applied.

Evaluation of the Physicochemical and Biological Properties of EndoSequence BC Sealer HiFlow

INTRODUCTION

Understanding the physicochemical and biological properties of endodontic sealers is important for endodontic treatment planning. This study evaluated the properties of EndoSequence BC Sealer HiFlow (BCH; Brasseler USA, Savannah, GA), EndoSequence BC Sealer (BC, Brasseler USA), and AH Plus (AHP; Dentsply DeTrey, Konstanz, Germany). The effect of temperature on the setting time and flow of these sealers was also evaluated.

METHODS

The setting time, flow, radiopacity, pH, solubility, and calcium release were investigated following ISO guidelines. The morphology and chemical composition of the sealers were evaluated by scanning electron microscopy and energy-dispersive spectroscopy. The antibacterial activity of sealers was tested against 2 strains of Enterococcus faecalis. Sealer cytotoxicity and the effects on messenger RNA expression of proinflammatory and mineralization genes were also investigated. Data analysis was performed using analysis of variance, Tukey, Kruskal-Wallis, and Dunn multiple comparison tests. P ≤ .05 was considered statistically significant.

RESULTS

The setting time and flow rate of all sealers were affected by heat (P ≤ .05). The setting times and solubility of BCH and BC were significantly higher than AHP (P ≤ .0001). The radiopacity of AHP was higher than BCH and BC (P ≤ .0001). All sealers were alkaline and had antibacterial effects. Cell viability was higher for BCH and BC than AHP (P ≤ .0001). No significant differences in messenger RNA expression of proinflammatory and mineralization genes were observed.

CONCLUSIONS

Overall, BCH and BC had similar physicochemical and biological properties. The observed high solubility of BCH and BC as well as the high cytotoxicity of AHP might negatively impact the clinical performance of these materials. The application of heat affected the setting time and flow of all sealers.

Physicochemical Properties of Two Generations of MTA-Based Root Canal Sealers

This study evaluated the physicochemical properties and the effect of solubility on the surface morphology and composition of the root canal sealers MTA-Bioseal, MTA-Fillapex, and Adseal. Discs (n = 10) of freshly mixed sealer were prepared and then analyzed by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDX). The discs were immersed for 1, 7, 14, and 28 days in deionized water. The solubility %; pH change of the solution; and released calcium, phosphate, and silicon were measured for each period. The flowability and film thickness were also evaluated. Changes in the surface morphology and composition after 28 days of immersion were evaluated by SEM/EDX. The data were statistically analyzed by one-way ANOVA at p < 0.05. The FTIR and EDX results revealed similar compositions of MTA-Bioseal and MTA-Fillapex, but with different concentrations. The two MTA-based sealers had higher solution alkalinity (pH > 10) than Adseal (pH ≈ 8.5). MTA-Fillapex exhibited the highest solubility % and the largest calcium and silicon ion release. MTA-Bioseal had the highest phosphate ion release. After 28 days, the sealer surfaces showed large micropores, with larger pores in MTA-Fillapex. Adseal had an intermediate flowability but exhibited the greatest film thickness. Finally, the highest solubility and largest amount of silicon release was exhibited by MTA-Fillapex, which might predispose it to the development of large micropores, compromising the apical seal of obturation.

Influence of variations in the environmental pH on the solubility and water sorption of a calcium silicate-based root canal sealer

AIM

To evaluate the influence of pH variation on the solubility and water sorption of a premixed calcium silicate-based root canal sealer (EndoSequence BC Sealer) compared to the gold standard based on epoxy resin (AH Plus Jet) after immersion in distilled water and phosphate-buffered saline (PBS).

METHODOLOGY

Solubility and water sorption were evaluated after immersion in distilled water or PBS at several pHs (5, 7 and 12) and the values were calculated as percentages of the original mass after 24 h, 7 and 30 days of immersion. The crystalline structures present in the sealers and surface precipitates were assessed by X-ray diffraction. The Shapiro-Wilk's test revealed that data were normally distributed; thus, statistical analysis was performed using one-way anova and Tukey's tests or independent t-test, assuming a 5% α-error.

RESULTS

EndoSequence BC Sealer was associated with significantly greater water sorption and solubility compared to AH Plus Jet in all tested conditions (P < 0.05). The acid environment increased the 24 h solubility of EndoSequence BC Sealer immersed in PBS (P < 0.05) and did not induce significative changes in the water sorption (P > 0.05). Alkaline pH reduced the solubility of EndoSequence BC Sealer and increased that of AH Plus Jet at all experimental times and soaking media (P < 0.05). Alkaline environment also significantly increased the water sorption of AH Plus Jet immersed in PBS (P < 0.05). Immersion in PBS significantly reduced the solubility of EndoSequence BC Sealer and significantly increased that of AH Plus Jet (P < 0.05). Precipitates on the surface of EndoSequence BC Sealer corresponding to hydroxyapatite and calcium carbonate were detected after immersion in PBS at pH 5 and 7 for 30 days.

CONCLUSIONS

EndoSequence BC Sealer had significantly greater solubility and water sorption than AH Plus Jet. Although the alkaline pH and soaking media directly influenced the solubility and water sorption of the sealers, the solubility of AH Plus Jet remained within the limits recommended by ISO 6876, whilst the solubility of the EndoSequence BC Sealer did not comply with ISO recommendations in all the conditions tested.

Physico-Chemical Investigation of Endodontic Sealers Exposed to Simulated Intracanal Heat Application: Hydraulic Calcium Silicate-Based Sealers

The aim of this study was to gain information about the effect of thermal treatment of calcium silicate-based sealers. BioRoot RCS (BR), Total Fill BC Sealer (TFBC), and Total Fill BC Sealer HiFlow (TFHF) were exposed to thermal treatment at 37 °C, 47 °C, 57 °C, 67 °C, 77 °C, 87 °C and 97 °C for 30 s. Heat treatment at 97 °C was performed for 60 and 180 s to simulate inappropriate application of warm obturation techniques. Thereafter, specimens were cooled to 37 °C and physical properties (setting time/flow/film thickness according to ISO 6876) were evaluated. Chemical properties (Fourier-transform infrared spectroscopy) were assessed after incubation of the specimens in an incubator at 37 °C and 100% humidity for 8 weeks. Statistical analysis of physical properties was performed using the Kruskal-Wallis-Test (P = 0.05). The setting time, flow, and film thickness of TFBC and TFHF were not relevantly influenced by thermal treatment. Setting time of BR decreased slightly when temperature of heat application increased from 37 °C to 77 °C (P < 0.05). Further heat treatment of BR above 77 °C led to an immediate setting. FT-IR spectroscopy did not reveal any chemical changes for either sealers. Thermal treatment did not lead to any substantial chemical changes at all temperature levels, while physical properties of BR were compromised by heating. TFBC and TFHF can be considered suitable for warm obturation techniques.

Effects of heating on the physical properties of premixed calcium silicate-based root canal sealers

The purpose of this study was to examine the effect of heating on the physical properties of four types of premixed calcium silicate-based root canal sealers. Endoseal MTA, Well-Root ST, EndoSequence BC Sealer, EndoSequence BC Sealer HiFlow, and AH Plus (epoxy resin root canal sealer) were heated at 100°C for 1 min, and changes in setting time, flow, and film thickness were evaluated in accordance with ISO 6876:2012 standards. In addition, pH measurement and scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) analyses of the set materials were performed. All root canal sealers heated at 100°C showed significant decreases in setting time and flow, particularly Endoseal MTA. In addition, the film thickness of Endoseal MTA increased significantly after heating at 100°C. The pH and SEM/EDS results were not affected by heating. Heating calcium silicate-based root canal sealers accelerated setting time, decreased flow, and increased film thickness. However, the degree of these changes varied among the products. The present findings indicate that heat-induced changes in the physical properties of calcium silicate-based root canal sealers could adversely affect the quality of warm vertical condensation technique.

Antimicrobial Effectiveness of Calcium Silicate Sealers against a Nutrient-Stressed Multispecies Biofilm

Purpose: This study compared the antimicrobial efficacy of calcium silicate sealers (BioRoot RCS and Total Fill BC) and conventional sealers (AH Plus and Tubli-seal) against planktonic bacteria and a nutrient-stressed multispecies biofilm. Methods: Antimicrobial properties of freshly mixed sealers were investigated using the direct contact test (DCT) and a nutrient-stressed multispecies biofilm comprised of five endodontic strains. Antimicrobial activity was determined using quantitative viable counts and confocal laser scanning microscopy (CLSM) analysis with live/dead staining. The pH of the sealers was analysed over a period of 28 days in Hanks Balanced Salt Solution (HBSS). Analysis of variance (ANOVA) with Tukey tests and the Kruskal–Wallis test were used for data analysis with a significance of 5%. Results: All endodontic sealers exhibited significant antimicrobial activity against planktonic bacteria (p < 0.05). BioRoot RCS caused a significant reduction in viable counts of the biofilms compared to AH Plus and the control (p < 0.05), while no significant difference could be observed compared to TotalFill BC and Tubli-seal (p > 0.05). CLSM analysis showed that BioRoot RCS and TotalFill BC exhibited significant biofilm inhibition compared to Tubli-seal, AH Plus and the control (p < 0.05). BioRoot RCS presented with the highest microbial killing, followed by TotalFill BC and Tubli-seal. Alkalizing activity was seen from the onset by BioRoot RCS, TotalFill BC and AH Plus. After 28 days, BioRoot RCS demonstrated the highest pH in HBSS (pH > 12). Conclusions: Calcium silicate sealers exhibited effective antimicrobial properties. This was demonstrated by superior biofilm inhibition capacity and microbial killing, with strong alkalizing activity compared to epoxy-based and zinc oxide-eugenol-based sealers.

Calcium silicate-based root canal sealers: a literature review

Epoxy resin-based sealers are currently widely used, and several studies have considered AH Plus to be the gold-standard sealer. However, it still has limitations, including possible mutagenicity, cytotoxicity, inflammatory response, and hydrophobicity. Drawing upon the advantages of mineral trioxide aggregate, calcium silicate-based sealers were introduced with high levels of biocompatibility and hydrophilicity. Because of the hydrophilic environment in root canals, water resorption and solubility of root canal sealers are important factors contributing to their stability. Sealers displaying lower microleakage and stronger push-out bond strength are also needed to endure the dynamic tooth environment. Although the physical properties of calcium silicate-based sealers meet International Organization for Standardization recommendations, and they have consistently reported to be biocompatible, they have not overcome conventional resin-based sealers in actual practice. Therefore, further studies aiming to improve the physical properties of calcium silicate-based sealers are needed.

Physico-chemical investigation of endodontic sealers exposed to simulated intracanal heat application: epoxy resins and zinc oxide-eugenols

AIM

To gain information in a laboratory setting about the effect of thermal treatment of epoxy resin-based and zinc oxide-eugenol-based sealers.

METHODOLOGY

AH Plus and Pulp Canal Sealer (PCS) were exposed to thermal treatment at 37, 47, 57, 67, 77, 87 and 97 °C for 30 s. According to clinically relevant considerations, intracanal sealer temperature is likely not to exceed 60 °C during warm vertical root canal filling. Heat application is recommended for less than 30 s during continuous wave technique, but might exceed this threshold in complex cases. Furthermore, heat treatment at 97 °C was performed for 60 and 180 s to simulate inappropriate implementation of warm vertical filling techniques. Specimens were heated inside 2-mL plastic tubes in a thermo-controlled water bath until the temperatures were reached and kept at this temperature for the determined period of time. Afterwards, specimens were cooled to body temperature and physical properties (setting time, flow, film thickness according to ISO 6876) were assessed. Chemical properties (Fourier transformed infrared spectroscopy) were assessed after complete setting of the specimens in an incubator at 37 °C and 100% humidity. Statistical analysis of physical properties was performed using Kruskal-Wallis test (P = 0.05).

RESULTS

The setting time of AH Plus and PCS decreased when temperature and duration of heat application increased. Whilst the setting time of AH Plus decreased from 622 min at 20 °C (for 30 s) to 381 min at 97 °C (for 180 s; P < 0.05), heat treatment of PCS at 97 °C for 180 s led to an immediate setting of the material. From 20 °C (for 30 s) to 97 °C (for 30 s), the setting time of PCS decreased from 80.1 to 41.0 h (P < 0.05). Film thickness and flow were not relevantly influenced by thermal treatment except for PCS at 97 °C for 180 s. FT-IR spectroscopy did not reveal any chemical changes of either sealer after thermal treatment.

CONCLUSIONS

Thermal treatment simulating clinically relevant temperature levels and heating times did not lead to any substantial physical or chemical changes at all temperature levels when heating did not exceed 60 s. AH Plus and Pulp Canal Sealer can be considered suitable for warm root filling techniques.

Antimicrobial and ultrastructural properties of root canal filling materials exposed to bacterial challenge

INTRODUCTION

Chemo-mechanical preparation of the root canal leaves behind viable bacteria which can lead to treatment failure. Materials used inside the root canal should possess antimicrobial properties and also resist disintegration in the presence of biofilm.

METHODS

Gutta-percha, three root canal sealers (Pulp Canal Sealer, AH Plus and BioRoot RCS) and materials used to make posts (a metal and a resin) were evaluated. Their antimicrobial activity against Enterococcus faecalis in direct contact was assessed by scanning electron microscopy and live-dead staining using confocal microscopy over a period of eight weeks. The materials' structural integrity was assessed by scanning electron microscopy.

RESULTS

The antimicrobial activity of the materials varied. The metal alloy posts as well as BioRoot RCS sealer did not allow any biofilm accumulation; but gutta-percha, Pulp Canal Sealer and resin from fibre-reinforced posts encouraged thick biofilm accumulation. Microstructural changes were observed in AH Plus (washout) and BioRoot (crystal deposition) in contact with biofilm. The Pulp Canal and BioRoot RCS sealers exhibited a modified ion leaching pattern in contact with microbially loaded media.

CONCLUSIONS

The microbial challenge affected the material microstructure in some of the materials tested and allowed biofilm accumulation. Although clinical success depends on a number of factors, materials that are structurally sound and exhibit antimicrobial properties are preferable for endodontic therapy and tooth restoration involving entry in the root canal.

Duration of Immersion and Type of Immersion Solution Distort the Outcome of Push-Out Bond Strength Testing Protocols

This study aimed to investigate the influence of immersion duration and the type of immersion solution on the outcome of push-out bond strength (POBS) tests. Root canals of 120 straight single-rooted teeth were instrumented to a diameter of 1.5 mm and irrigated with 5 mL of 3% NaOCl. Four horizontal slices with a thickness of 1 mm were cut, representing the mid-portion of the root. The specimens (n = 480) were irrigated with 17% ethylenediaminetetraacetic acid(EDTA) for 60 seconds, then twice with distilled water (DW) for 30 s each. The canals were filled with either AH Plus (Dentsply Sirona, Konstanz, Germany) or BioRoot RCS (Septodont, St. Maur-des-Fossés, France) (n = 240). Separated into four groups per type of sealer (n = 60), the specimens were incubated at 37 °C covered with gauze moistened in DW or phosphate-buffered saline (PBS) for either one or eight weeks. Dislodgement resistance was measured and POBS was calculated. Statistical analysis was performed using the analysis of variance (ANOVA) test and the Student-Newman-Keuls test (p = 0.05). AH Plus showed higher POBS when stored in PBS compared to DW, irrespective of the incubation period (p < 0.05). BioRoot RCS displayed higher POBS when stored in DW compared to PBS after eight weeks of incubation (p < 0.05). No difference was found after one week of incubation (p > 0.05). Irrespective of the sealer or the immersion solution, POBS decreased from one week to eight weeks (p < 0.05). Mixed failure modes were found in all groups irrespective of sealer, immersion medium, or immersion period. POBS decreased after a longer incubation time in both immersion solutions. Duration of immersion and the type of immersion solution had a significant impact on the outcome of the POBS testing protocol.

The single cone obturation technique with a modified warm filler

OBJECTIVES

The aim of this study was to develop a new method of obturation by warm sealer in conjunction to single cone gutta-percha and evaluate the suitability of this technique to obturate complex root canal systems.

METHODOLOGY

Three root canal sealers namely, AH Plus, BioRoot RCS, GuttaFlow and a prototype sealer composed of tricalcium silicate and 30% zirconium oxide mixed with water and water-soluble polymer were investigated. The sealers were tested for flow, film thickness, setting time and radiopacity following ISO 6876 (2012) recommendations at room temperature and following heat application at 100°C to change the sealer properties. All the test sealers were characterized by scanning electron microscopy and energy dispersive spectroscopy. The volume of voids when used with a single cone obturation technique both unmodified and modified by heat was evaluated using microcomputed tomography.

RESULTS

Although the prototype sealer was designed to be similar to the BioRoot, its physical properties were found to be different. All sealers tested were affected by the heat and exhibited a change in the physical properties mainly the setting time, flow, film thickness and void volume.

CONCLUSIONS

The application of heat affected the sealer properties and void volume. The single cone obturation technique may not be suitable for complex canal anatomy and furthermore, AH Plus should not be subjected to high temperatures as its properties deteriorate and void volume increases.

Bioactivity potential of Portland cement in regenerative endodontic procedures: From clinic to lab

OBJECTIVE

The aim of this study was to evaluate the bioactivity potential of an hydraulic calcium-silicate cement, Pure Portland Cement Med-PZ (Medcem, Weinfelden, Switzerland: 'MPC'), applied in a tooth extracted because of failed regenerative endodontic procedures (REP) and by means of ex vivo (EV) specimens.

METHODS

Ten EV cylindrical dentin cavities were prepared and filled with MPC and stored for 1 month in distilled water (DW), Hank's balanced salt solution (HBSS), Dulbecco's phosphate-buffered saline (DPBS), simulated body fluid (SBF), versus no media (NM) serving as control. Six additional EV specimens were filled with MPC and exposed for 2 weeks to leucocyte-and-platelet-rich fibrin (LPRF)-clot (C), LPRF-membrane (M) and LPRF-exudate (E). MPC in the EV specimens and in the coronal part of the REP tooth was analyzed by means of micro-Raman spectroscopy (MR), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS).

RESULTS

SEM showed rough crystallite surfaces for the EV samples and a porous surface for the REP tooth. EDS of the EV samples revealed prominent peaks for Ca, Si and O. Storage in HBSS, DPBS, SBF, exposure to LPRF and the REP tooth showed considerable amounts of P as well. MR exhibited vibrations of phosphate (DPBS, SBF), carbonated hydroxyapatite (DPBS, SBF), calcium carbonate (DW, HBSS, NM, REP-tooth, LPRF-E), oxidized (ferric) proteins (LPRF-E/C/M) and the amide III band (all samples). Hence, only storage of MPC in DPBS and SBF for 1 month revealed bioactivity.

SIGNIFICANCE

The environmental conditions, namely the laboratory and clinical settings, affect the bioactivity potential of MPC.