Characteristics of multiple Fano resonances in waveguide-coupled surface plasmon resonance sensors based on waveguide theory

Experimental demonstration of multiple Fano resonances in a mirrored array of split-ring resonators on a thick substrate

This work demonstrates the first experimental observation of multiple Fano resonances in the terahertz range in a system based on an array of mirror-symmetric split-ring resonators deposited on low-loss and low-refractive index polytetrafluoroethylene (PTFE) substrate. For the first time, selective surface activation induced by laser technology has been used to deposit a copper layer on a PTFE substrate with the further application of standard mask lithography for metasurface manufacturing.

Plasmonic crystals fabricated by nanosphere lithography for advanced biosensing

Plasmonic nanostructures have attracted wide attention in the past few years for their promising applications such as surface-enhanced spectroscopies, chemical or biosensing, and so on. However, the fabrication of plasmonic nanostructures relies on traditional photolithography methods such as electron beam lithography and focused ion beam lithography, which have inherent shortcomings, such as high fabrication cost and being time-consuming. Here, using the nanosphere lithography approach, we fabricate large-area long-range ordered periodic Au nanohole arrays on an opaque Au substrate. The structure supports spectral-isolation and well-defined plasmonic resonances favorable to spectral monitoring at normal incidence of light. The bulk sensitivity of up to 403 nm/RIU is measured for the plasmon modes. Furthermore, we assess the surface-sensing performance of the system and obtain a near-field decay length of about 240 nm, meaning that it is desirable to detect the biological protein molecules. The suggested plasmonic-sensing platform has broad application prospects in the development of low-cost and high-throughput biosensor chips.

Plasmon-induced transparency sensor for detection of minuscule refractive index changes in ultra-low index materials

Detection of low-index materials such as aerogels and also detection of refractive index variations in these materials is still a challenging task. Here, a high figure of merit (FOM) sensor based on plasmon-induced transparency (PIT) is proposed for the detection of aerogel refractive index changes. In the proposed PIT sensor, the transparency window in an opaque region arises from the coupling between surface plasmon polariton (SPP) mode and planar waveguide mode. By comprising sub-wavelength grating (SWG) in the planar waveguide region, the maximum of the electric field of waveguide occurs in a low index media. This facilitates detection of the aerogels when they are used as the low index material (sensing material). Application of the subwavelength grating waveguide also improves the sensitivity of the sensor by a factor of six compared to a conventional structure with a homogenous waveguide. The proposed structure has a quality factor of Q ≥ 1800, and a reflection of 86%, and can detect the refractive index changes as low as Δn = 0.002 (around n = 1.0). The lineshape, Q-factor, and resonant wavelength of the transparency spectrum can be controlled by tailoring the structural parameters. Our work also has potential application in switching, filtering, and spectral shaping.

Refractive index sensor with alternative high performance using black phosphorus in the all-dielectric configuration

We theoretically propose a nonplasmonic optical refractive index sensor based on black phosphorus (BP) and other dielectric materials in the infrared band. Due to the anisotropic property of BP, the proposed sensor can achieve alternative sensitivity and figure of merit (FOM) in its different crystal directions. The high sensitivity and FOM are attributed to the strong magnetic resonance in the all-dielectric configuration. The coupled-mode theory (CMT) is used to verify the simulation results and reveal the physical mechanism. Furthermore, influences of the sample and the incident angle on the performance of the sensor are also discussed. Our design utilizes a simple dielectric structure with a BP monolayer, which exhibits great potential for the future high-performance sensor with low cost.

Fabrication of Au Nanoparticle Arrays on Flexible Substrate for Tunable Localized Surface Plasmon Resonance

In this work, Au nanoparticle (AuNP) arrays on shape memory polyurethane (SMPU) substrates serve as flexible materials for tunable localized surface plasmon resonance (LSPR). AuNP arrays prepared by diblock copolymer self-assembly are transferred from rigid silicon wafers onto flexible SMPU substrates with ultrasonic treatment rather than peeling off directly. The resultant AuNP array SMPU films have excellent mechanical properties and stable thermodynamic properties. The LSPR arising from AuNP arrays is increased by negative bending on SMPU substrates, whereas the LSPR is decreased by positive bending. Besides, upon uniaxial tension, the vertical LSPR is increased first then decreased, whereas the parallel LSPR is similar, resulting in the overall LSPR of AuNP arrays being increased first and then decreased with the mechanical uniaxial tension of SMPU. Moreover, the resultant AuNP array SMPU films exhibit excellent flexibility, stability, and homogeneity in practical surface-enhanced Raman scattering (SERS) application. This approach of incorporating AuNP arrays on SMPU substrates for tuning plasmonic properties have great potential applications in SERS, fluorescence enhancement, and newly optoelectronic materials.

Guided-Mode Resonance-Based Relative Humidity Sensing Employing a Planar Waveguide Structure

In this paper, we present a new type of guided-mode resonance (GMR)-based sensor that utilizes a planar waveguide structure (PWS). We employed a PWS with an asymmetric three-layer waveguide structure consisting of substrate/Au/photoresist. The ellipsometric characterization of the structure layers, the simulated reflectance spectra, and optical field distributions under GMR conditions showed that multiple waveguide modes can be excited in the PWS. These modes can be used for refractive index sensing, and the theoretical analysis of the designed PWS showed a sensitivity to the refractive index up to 6600 nm per refractive index unit (RIU) and a figure of merit (FOM) up to 224 RIU⁻¹. In response to these promising theoretical results, the PWS was used to measure the relative humidity (RH) of moist air with a sensitivity up to 0.141 nm/%RH and a FOM reaching 3.7 × 10⁻³%RH⁻¹. The results demonstrate that this highly-sensitive and hysteresis-free sensor based on GMR has the potential to be used in a wide range of applications.

Study on the dual-Fano resonance generation and its potential for self-calibrated sensing

Sensors based on Fano resonance (FR) have become a promising platform for various biological and chemical applications. However, most investigations on FR are limited to the generation of individual resonance. In this paper, based on the coupling between surface plasmon polariton (SPP) and two photonic waveguide modes, a dual-FR system is designed and analyzed. To explain the coupling mechanism, an extended temporal coupled-mode model is established to provide the physical insight. The spectral response obtained from the model matches well with the numerical one. Due to the decoupled nature of the FRs, a self-calibrated or dual-parameter sensing scheme for refractive index and temperature is proposed. The refractive index sensitivity up to 765 nm/RIU and temperature sensitivity up to 0.087 nm/°C are obtained by wavelength interrogation with figure-of-merit (FOM) up to 33260.9 RIU^-1 and 3.78 °C^-1 respectively. The proposed sensor provides great potential in fields of the multi-parameter sensing.

Sensing Features of the Fano Resonance in an MIM Waveguide Coupled with an Elliptical Ring Resonant Cavity

In this article, a novel refractive index sensor composed of a metal–insulator–metal (MIM) waveguide with two rectangular stubs coupled with an elliptical ring resonator is proposed, the geometric parameters of which are controlled at a few hundreds of nanometer size. The transmission feature of the structure was studied by the finite element method based on electronic design automation (EDA) software COMSOL Multiphysics 5.4 (Stockholm, Sweden). The rectangular stub resonator can be thought of as a Fabry–Perot (FP) cavity, which can facilitate the Fano resonance. The simulation results reveal that the structure has a symmetric Lorentzian resonance, as well as an ultrasharp and asymmetrical Fano resonance. By adjusting the geometrical parameters, the sensitivity and figure of merit (FOM) of the structure can be optimized flexibly. After adjustments and optimization, the maximum sensitivity can reach up to 1550 nm/RIU (nanometer/Refractive Index Unit) and its FOM is 43.05. This structure presented in this article also has a promising application in highly integrated medical optical sensors to detect the concentration of hemoglobin and monitor body health.

Tunable Fano-Resonant Metasurfaces on a Disposable Plastic-Template for Multimodal and Multiplex Biosensing

Metasurfaces are engineered nanostructured interfaces that extend the photonic behavior of natural materials, and they spur many breakthroughs in multiple fields, including quantum optics, optoelectronics, and biosensing. Recent advances in metasurface nanofabrication enable precise manipulation of light-matter interactions at subwavelength scales. However, current fabrication methods are costly and time-consuming and have a small active area with low reproducibility due to limitations in lithography, where sensing nanosized rare biotargets requires a wide active surface area for efficient binding and detection. Here, a plastic-templated tunable metasurface with a large active area and periodic metal-dielectric layers to excite plasmonic Fano resonance transitions providing multimodal and multiplex sensing of small biotargets, such as proteins and viruses, is introduced. The tunable Fano resonance feature of the metasurface is enabled via chemical etching steps to manage nanoperiodicity of the plastic template decorated with plasmonic layers and surrounding dielectric medium. This metasurface integrated with microfluidics further enhances the light-matter interactions over a wide sensing area, extending data collection from 3D to 4D by tracking real-time biomolecular binding events. Overall, this work resolves cost- and complexity-related large-scale fabrication challenges and improves multilayer sensitivity of detection in biosensing applications.

Integrated multichannel Young's interferometer sensor based on long-range surface plasmon waveguides

Two integrated Young's interferometer (YI) sensors based on long-range surface plasmon polariton (LRSPP) waveguides are presented. The first sensor is single-channel and based on a Y-junction splitter, and the other is multi-channel and based on a corporate feed structure. The multichannel YI enables simultaneous and independent phase-based monitoring of refractive index changes in multiple channels. The diverging output beams from the waveguides are overlapped in the far field to form interference patterns which are then post-processed using the fast Fourier transform (FFT) algorithm to extract phase values. The sensing capability of these YIs was demonstrated through sequential injection of solutions with increasing refractive index into the sensing channels. A detection limit of ∼ 1 × 10^-6 RIU was obtained for both LRSPP based YIs, a significant improvement over measurements from similar structures using attenuation-based sensing.

Linearly Tunable Fano Resonance Modes in a Plasmonic Nanostructure with a Waveguide Loaded with Two Rectangular Cavities Coupled by a Circular Cavity

Linear tunability has important applications since it can be realized by using linear control voltage and can be used conveniently without requiring nonlinear scale. In this paper, a kind of plasmonic nanostructure with a waveguide loaded with two rectangular cavities coupled by a circular cavity is proposed to produce four Fano resonance modes. The transfer matrix theory is employed to analyze the coupled-waveguide-cavity system. By analyzing the property of each single cavity, it reveals that the Fano resonances are originated from the coupling effect of the narrow modes in the metal-core circular cavity and the broad modes in the rectangular cavities. Owing to the interference of different modes, Fano peaks have different sensitivities on the cavity parameters, which can provide important guidance for designing Fano-resonance structures. Furthermore, adjusting the orientation angle of the metal core in the circular cavity can easily tune the line profile of Fano resonance modes in the structure. Especially, the figure of merit (FoM) increases linearly with the orientation angle and has a maximum of 8056. The proposed plasmonic system has the advantage of high transmission, ultracompact configuration, and easy integration, which can be applied in biochemical detecting or sensing, ultra-fast switching, slow-light technologies, and so on.

Theoretical Investigation of a Highly Sensitive Refractive-Index Sensor Based on TM₀ Waveguide Mode Resonance Excited in an Asymmetric Metal-Cladding Dielectric Waveguide Structure

This study proposes a highly sensitive refractive-index (RI) sensor based on a TM₀ waveguide mode resonance excited in an asymmetric metal-cladding dielectric waveguide structure, where the analyte serves as the guiding layer. By scanning the wavelength at fixed angles of incidence, the reflection spectra of the sensor were obtained. The results showed that the resonance wavelength redshifted dramatically with increases in the analyte RI, which indicates that this approach can be used to sense both the resonance wavelength and the analyte RI. Based on this approach, we investigated the sensing properties, including the sensitivity and figure of merit, at fixed incident angles of 60° and 45°, at which the sensitivity of the sensor reached 7724.9 nm/RIU (refractive index units) and 1339 nm/RIU, respectively. Compared with surface plasmon resonance sensors, which are based on a similar structure, the proposed sensor can accept a more flexible range of incident angles and a wider sensing range of analyte RI. This approach thus has tremendous potential for use in numerous sensing domains, such as biochemical and medical analyses.

Rectangular plasmonic interferometer for high sensitive glycerol sensor

A novel plasmonic interferometric sensor intended for application to biochemical sensing has been investigated experimentally and theoretically. The sensor was included a slit surrounded by rectangular grooves using a thick gold film. A three-dimensional finite difference time-domain commercial software package was applied to simulate the structure. The Focused ion beam milling has been used as a mean to fabricate series of rectangular plasmonic interferometer with varying slit-groove distance L. Oscillation behavior is shown by transmission spectra in a broadband wavelength range between 400 nm and 800 nm in the distance between slit and grooves. Red-shifted interference spectrum is the result of increasing refractive indices. The proposed structure is functional from visible to near-infrared wavelength range and yields a sensitivity of 4923 nm/RIU and a figure of merit as high as 214 at 729 nm wavelength. In conclusion, this study indicates the possibility of fabricating a low cost, compact, and real-time high-throughput plasmonic interferometer.

Enhanced Second-Harmonic Generation from Fanolike Resonance in an Asymmetric Homodimer of Gold Elliptical Nanodisks

In this article, we have investigated the enhanced second-harmonic generation (SHG) from Fanolike resonance in an asymmetric homodimer of gold elliptical nanodisks using a three-dimensional finite element method. We have found that the broken symmetry will cause  Fanolike resonances in the extinction spectrum, resulting in the enhancement of SHG efficiency. When one of the gold elliptical nanodisks rotates, the SHG efficiency increases first and then decreases. In addition, we have also shown that the SHG signal blue-shifts with the reduction of efficiency when the separation between two nanodisks increases. Furthermore, when the nanodisks become thicker, the SHG signal also blue-shifts with the increase of efficiency. The SHG signal from this simple plasmonic structure with high efficiency and tunability may pave a way toward practical applications in sensing and generating a new light source.

A Tunable Plasmonic Refractive Index Sensor with Nanoring-Strip Graphene Arrays

In the present study, we design a tunable plasmonic refractive index sensor with nanoring-strip graphene arrays. The calculations prove that the nanoring-strip have two transmission dips. By changing the strip length L of the present structure, we find that the nanoring-strip graphene arrays have a wide range of resonances (resonance wavelength increases from 17.73 μm to 28.15 μm). When changing the sensing medium refractive index n_med, the sensitivity of mode A and B can reach 2.97 μm/RIU and 5.20 μm/RIU. By changing the doping level n_g, we notice that the transmission characteristics can be tuned flexibly. Finally, the proposed sensor also shows good angle tolerance for both transverse magnetic (TM) and transverse electric (TE) polarizations. The proposed nanoring-strip graphene arrays along with the numerical results could open a new avenue to realize various tunable plasmon devices and have a great application prospect in biosensing, detection, and imaging.