Spider dragline silk composite films doped with linear and telechelic polyalanine: Effect of polyalanine on the structure and mechanical properties

Factors Influencing Properties of Spider Silk Coatings and Their Interactions within a Biological Environment

Biomaterials are an indispensable part of biomedical research. However, although many materials display suitable application-specific properties, they provide only poor biocompatibility when implanted into a human/animal body leading to inflammation and rejection reactions. Coatings made of spider silk proteins are promising alternatives for various applications since they are biocompatible, non-toxic and anti-inflammatory. Nevertheless, the biological response toward a spider silk coating cannot be generalized. The properties of spider silk coatings are influenced by many factors, including silk source, solvent, the substrate to be coated, pre- and post-treatments and the processing technique. All these factors consequently affect the biological response of the environment and the putative application of the appropriate silk coating. Here, we summarize recently identified factors to be considered before spider silk processing as well as physicochemical characterization methods. Furthermore, we highlight important results of biological evaluations to emphasize the importance of adjustability and adaption to a specific application. Finally, we provide an experimental matrix of parameters to be considered for a specific application and a guided biological response as exemplarily tested with two different fibroblast cell lines.

Integrated construction of silkworm cocoon-inspired 3D scaffold for improving cell manufacture and cryopreservation

Although cellular therapy holds enormous promise in treating intractable diseases, its application potential has been significantly hampered due to the scarcity of reliable and consistent cell sources. Therefore, a high-efficiency strategy that improves cell production and storage is desperately needed. Herein, we develop a versatile 3D bioinspired scaffold (Cryosilk) for improving scalable cell manufacture and cryopreservation. A bottom-up fabrication technique integrating electrospinning, in situ surface functionalization and freeze-shaping was explored to construct Cryosilk with biomimetic features and functions of silkworm cocoons. Cryosilk is composed of a core-shell heterostructure with silk fibroin/poly alanine fiber core and silk sericin shell, generating a 3D cocoon-mimicking fibrous structure. Importantly, Cryosilk possesses improved thermal conductivity and ice crystal resistance capability, thus enabling to cryopreserve biological samples with minimal cryodamage. Furthermore, Cryosilk not only promotes cell adhesion and growth, but achieves rapid and uniform rewarming process, which provides high cryopreservation efficacy for immune cells and stem cells. Particularly, Cryosilk can maintain cell viability and biofunctions of stem cell-scaffold constructs after freeze-thawing, which can be directly implanted to promote wound healing. Thus, Cryosilk offers unprecedented efficacy in cell manufacture and cryopreservation, which provides sufficient and high-quality precious cells and tissue engineered scaffolds for cellular therapy.

High-Strength Collagen-Based Composite Films Regulated by Water-Soluble Recombinant Spider Silk Proteins and Water Annealing

Spider silk has attracted extensive attention in the development of high-performance tissue engineering materials because of its excellent physical properties, biocompatibility, and biodegradability. Although high-molecular-weight recombinant spider silk proteins can be obtained through metabolic engineering of host bacteria, the solubility of the recombinant protein products is always poor. Strong denaturants and organic solvents have thus had to be exploited for their dissolution, and this seriously limits the applications of recombinant spider silk protein-based composite biomaterials. Herein, through adjusting the temperature, ionic strength, and denaturation time during the refolding process, we successfully prepared water-soluble recombinant spider major ampullate spidroin 1 (sMaSp1) with different repeat modules (24mer, 48mer, 72mer, and 96mer). Then, MaSp1 was introduced into the collagen matrix for fabricating MaSp1-collagen composite films. The introduction of spider silk proteins was demonstrated to clearly alter the internal structure of the composite films and improve the mechanical properties of the collagen-based films and turn the opaque protein films into transparency ones. More interestingly, the composite film prepared with sMaSp1 exhibited better performance in mechanical strength and cell adhesion compared to that prepared with water-insoluble MaSp1 (pMaSp1), which might be attributed to the effect of the initial dissolved state of MaSp1 on the microstructure of composite films. Additionally, the molecular weight of MaSp1 was also shown to significantly influence the mechanical strength (enhanced to 1.1- to 2.3-fold) and cell adhesion of composite films, and 72mer of sMaSp1 showed the best physical properties with good bioactivity. This study provides a method to produce recombinant spider silk protein with excellent water solubility, making it possible to utilize this protein under environmentally benign, mild conditions. This paves the way for the application of recombinant spider silk proteins in the development of diverse composite biomaterials.

Mechanical Properties of Dragline Silk Fiber Using a Bottom-Up Approach

We propose a molecular-based three-dimensional (3D) continuum model of dragline silk of Araneus diadematus, which takes into account the plasticity of the β-sheet crystals, the rate-dependent behavior of the amorphous matrix, and the viscous interface friction between them. For the proposed model, we computed the tensile properties, the effects of velocity on the mechanical properties, and hysteresis values, which are in good agreement with available experimental data. The silk fiber model’s yield point, breaking strength, post-yield stiffness, and toughness increased with increasing pulling velocity, while extensibility and the diameter of the silk fiber decreased. Our bottom-up approach has shed light on silk fiber mechanics, which can be used as an essential tool to design artificial composite materials.

Chemoenzymatic Polymerization of l-Serine Ethyl Ester in Aqueous Media without Side-Group Protection

Poly(l-serine) (polySer) has tremendous potential as a polypeptide-based functional material due to the utility of the hydroxyl group on its side chain; however, tedious protection/deprotection of the hydroxyl groups is required for its synthesis. In this study, polySer was synthesized by the chemoenzymatic polymerization (CEP) of l-serine ethyl ester (Ser-OEt) or l-serine methyl ester (Ser-OMe) using papain as a catalyst in an aqueous medium. The CEP of Ser-OEt proceeded at basic pH ranging from 7.5 to 9.5 and resulted in the maximum precipitate yield of polySer at an optimized pH of 8.5. A series of peaks detected by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry revealed that the formed precipitate consisted of polySer with a degree of polymerization ranging from 5 to 22. Moreover, infrared spectroscopy, circular dichroism spectroscopy, and synchrotron wide-angle X-ray diffraction measurements indicated that the obtained polySer formed a β-sheet/strand structure. This is the first time the synthesis of polySer was realized by CEP in aqueous solution without protecting the hydroxyl group of the Ser monomer.

A silk composite fiber reinforced by telechelic-type polyalanine and its strengthening mechanism

A telechelic-type polyalanine was doped in silkworm silk fibroins to prepare reinforced composite fibers, which exhibited 42% and 51% higher mechanical properties than silk-only fibers in terms of tensile strength and toughness, respectively.

Hydrogel Preparation Methods and Biomaterials for Wound Dressing

Wounds have become one of the causes of death worldwide. The metabolic disorder of the wound microenvironment can lead to a series of serious symptoms, especially chronic wounds that bring great pain to patients, and there is currently no effective and widely used wound dressing. Therefore, it is important to develop new multifunctional wound dressings. Hydrogel is an ideal dressing candidate because of its 3D structure, good permeability, excellent biocompatibility, and ability to provide a moist environment for wound repair, which overcomes the shortcomings of traditional dressings. This article first briefly introduces the skin wound healing process, then the preparation methods of hydrogel dressings and the characteristics of hydrogel wound dressings made of natural biomaterials and synthetic materials are introduced. Finally, the development prospects and challenges of hydrogel wound dressings are discussed.

Searching for Aquamelt Behavior among Silklike Biomimetics during Fibrillation under Flow

In this paper, we elucidate a generic mechanism behind strain-induced phase transition in aqueous solutions of silk-inspired biomimetics by atomistic molecular dynamics simulations. We show the results of modeling of homopeptides polyglycine Gly₃₀ and polyalanine Ala₃₀ and a heteropeptide (Gly-Ala-Gly-Ala-Gly-Ser)₅, i.e., the simplest and yet relevant sequences that could mimic the behavior of natural silk under stress conditions. First, we analyze hydrophobicities of the sequences by calculating the Gibbs free energy of hydration and inspecting the interchain hydrogen bonding and hydration by water. Second, the force-extension profiles are scanned and compared with the results for poly(ethylene oxide), the synthetic polymer for which the aquamelt behavior has been proved recently. Additionally, the conformational transitions of oligopeptides from coiled to extended states are characterized by a generalized order parameter and by the dependence of the solvent-accessible surface area of the chains on applied stretching. Fibrillation itself is surveyed using both the two-dimensional interchain pair correlation function and the SAXS/WAXS patterns for the aggregates formed under stress. These are compared with experimental data found in the literature on fibril structure of silk composite materials doped with oligoalanine peptides. Our results show that tensile stress introduced into aqueous oligopeptide solutions facilitates interchain interactions. The oligopeptides display both a greater resistance to extension as compared to poly(ethylene oxide) and a reduced ability for hydrogen bonding of the stretched chains between oligomers and with water. Fiber formation is proved for all simulated objects, but the most structured one is made of a heteropeptide (Gly-Ala-Gly-Ala-Gly-Ser)₅: For this sequence, we obtain the highest degree of the secondary structure motifs in the fiber. We conclude that this is the most promising candidate among considered sequences to find the aquamelt behavior in further experimental studies.

Epidermal Cell Surface Structure and Chitin-Protein Co-assembly Determine Fiber Architecture in the Locust Cuticle

The geometrical similarity of helicoidal fiber arrangement in many biological fibrous extracellular matrices, such as bone, plant cell wall, or arthropod cuticle, to that of cholesteric liquid mesophases has led to the hypothesis that they may form passively through a mesophase precursor rather than by direct cellular control. In search of direct evidence to support or refute this hypothesis, here, we studied the process of cuticle formation in the tibia of the migratory locust, Locusta migratoria, where daily growth layers arise by the deposition of fiber arrangements alternating between unidirectional and helicoidal structures. Using focused ion beam/scanning electron microscopy (FIB/SEM) volume imaging and scanning X-ray scattering, we show that the epidermal cells determine an initial fiber orientation, from which the final architecture emerges by the self-organized co-assembly of chitin and proteins. Fiber orientation in the locust cuticle is therefore determined by both active and passive processes.